aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants/baseboard
AgeCommit message (Expand)Author
2020-12-08mb/*: Remove SATA mode config for CNL based mainboardsFelix Singer
2020-12-08soc/intel/cannonlake: Align SATA mode names with soc/sklFelix Singer
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-09-01mb/google/puff: Convert ASL file to new DPTF dt implEdward O'Callaghan
2020-08-27mb/google/puff: Update psyspl2 to 97% of adapter ratingDavid Wu
2020-08-23soc/intel/cnl: Configure FSP option PcieRpSlotImplementedNico Huber
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
2020-08-06mainboard/google/puff: Remove second temp sensorAndrew McRae
2020-07-14mb/hatch: Fix Puff baseboard missing mainboard symbolsEdward O'Callaghan
2020-06-26mb/google/hatch: Set Reset Power Cycle Duration for hatch platformsSridhar Siricilla
2020-06-23mb/google/hatch: Make puff and variants share common mainboard.cEdward O'Callaghan
2020-06-22mb/google/hatch: Make puff and variants share common dptf.aslEdward O'Callaghan
2020-06-22mb/google/hatch: Make puff and variants share common ec.hEdward O'Callaghan
2020-05-26cannonlake: update processor power limits configurationSumeet R Pawnikar
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
2020-04-24mb/google/hatch: Change baseboard EC wake & SCI masks to match kohakuTim Wawrzynczak
2020-04-14mb/google/hatch: Use tabs for alignmentPaul Menzel
2020-04-06mb/google/hatch: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-02-28mainboard/google/hatch: Migrate onto SKU ID helpersEdward O'Callaghan
2020-02-26mainboard/hatch: Fix GPE wake commentsEdward O'Callaghan
2020-02-17Revert "mb/google/hatch: Override CPU flex ratio"Tim Wawrzynczak
2020-02-04mb/google/hatch: Enable Audio DSP oscillator qualification for S0ixAamir Bohra
2020-02-01mb/google/hatch: Override CPU flex ratioSubrata Banik
2020-01-08mb/google/hatch: Remove fixed IccMax valuesJamie Chen
2019-12-25mainboard/google/hatch: Move gpio GPP_H3 config up from baseboardEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
2019-12-24mainboard/variant/puff: set PL values for puffKangheui Won
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
2019-12-05hatch: Fix FPMCU pwr/rst gpio handlingCraig Hesling
2019-12-05Revert "mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatch"Kane Chen
2019-10-30hatch: refactor gpio table into baseboard, allow empty SPDsPaul Fagerburg
2019-10-22mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatchKane Chen
2019-10-09mb/google/hatch: Set FPS as wake sourceShelley Chen
2019-09-20mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configurationTim Wawrzynczak
2019-09-12mb/google/hatch: Configure SATA DEVSLP pad reset config to PLT_RSTAamir Bohra
2019-08-20mb/google/hatch: Skip SD card controller WP pin configuration from FSPAamir Bohra
2019-08-13mb/google/hatch: Kohaku: Enable DMIC1 in device treeMac Chiang
2019-08-09mb/google/hatch: Refactor override_early_gpio_tableTim Wawrzynczak
2019-08-07mb/google/hatch: Kohaku: Re-setup dual-routing of EMR_GARAGE_DETTim Wawrzynczak
2019-08-03mb/google/hatch: Enable PmTimerDisabled config to reduce S0ix power usageSubrata Banik
2019-07-31mb/google/hatch: Initialize SSD GPIOs in bootblockShelley Chen
2019-07-31mb/google/hatch/variants/hatch: Set PCH Thermal Threshold value to 77 deg CSumeet Pawnikar
2019-07-30mb/google/hatch: Enable chipset_lockdown coreboot config for hatchSubrata Banik
2019-07-21mb/google/hatch: expose get_board_sku() as globalDavid Wu
2019-07-21mb/google/hatch: Add support for variant_devtree_update()David Wu
2019-07-19mb/google/hatch: Fix SD card is detected as read only issueSubrata Banik
2019-07-18mb/google/hatch: Add support for variant_memory_sku()Furquan Shaikh
2019-07-18mb/google/hatch: Disable wireless chargingSubrata Banik
2019-07-16mb/google/hatch: Disable Bluetooth in bootblock and enable in ramstageShelley Chen
2019-07-11mb/google/hatch: Update AC/DC loadline valuesRizwan Qureshi
2019-07-11mb/google/hatch: Disable GPIO community dynamic clock gatingTim Wawrzynczak
2019-07-11mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)Furquan Shaikh
2019-07-08mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen andFrank Wu
2019-07-07mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip selectKrishna Prasad Bhat
2019-07-02mb/google/hatch: Set trackpad irq and wake to GPP_A21Shelley Chen
2019-07-02mb/google/hatch: Add INVERT to all IOAPIC padsShelley Chen
2019-06-26mb/google/hatch: Add a GPIO to enable/disable FPMCU powerPhilip Chen
2019-06-26mb/google/hatch: Remove pulls on NC padsFurquan Shaikh
2019-06-26mb/google/hatch/variants/baseboard: Update PL2 power limit valueSumeet Pawnikar
2019-06-21mb/google/hatch: Do not pull down GPP_F2 internallyPhilip Chen
2019-06-20mb/google/hatch: Remove unused USB2 port5 from baseboard devicetreeAamir Bohra
2019-06-13mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disableSubrata Banik
2019-06-12mb/google/hatch: Disable dynamic clock gating for cr50's GPIOSubrata Banik
2019-06-04mb/google/hatch: Enable LTR for PCIe portsFurquan Shaikh
2019-05-23mb/google/hatch/variants: Fix DPTF sensor IDsEvan Green
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
2019-05-15soc/intel/cannonlake: Support different SPD read type for each slotPhilip Chen
2019-05-06mainboard/google/hatch: Enable PEN_EJECT_L as wake & notify source.Tim Wawrzynczak
2019-04-30mb/google/hatch: Modify IRQ configuration to enable RT5682 headset INTNaveen Manohar
2019-04-29mb/google/hatch/variants/baseboard: remove unused dqs_mapPaul Fagerburg
2019-04-25mb/google/hatch/: FPMCU not rebooted when DUT rebootsTim Wawrzynczak
2019-04-25mb/google/hatch: Pull up GPP_C13 for hatch and hatch_whlPhilip Chen
2019-04-24mb/google/kohaku: Update overridetree.cbTim Wawrzynczak
2019-04-24mb/google/hatch: Move SD card detect GPIO.Tim Wawrzynczak
2019-04-19kohaku: mb/hatch/gpio: Scrub Kohaku GPIOs.Tim Wawrzynczak
2019-04-15mb/google/hatch: Update sleep signal assertion widthsRizwan Qureshi
2019-04-12mb/google/hatch: Use GPIO IRQ for sx9310 deviceFurquan Shaikh
2019-04-12mb/google/hatch: Configure reset config to PLTRST for IOAPIC padsFurquan Shaikh
2019-04-09mb/google/hatch: Add ACPI support for BT reset functionalityTim Wawrzynczak
2019-04-04mb/google/hatch: Move I2C/SPI options to override treeFurquan Shaikh
2019-04-04mb/google/hatch: Change the DEVSLP reset config to PLTRSTRizwan Qureshi
2019-04-03mb/google/hatch: Enable Goodix Touch ScreenEric Lai
2019-04-02mb/google/hatch: Change GPIO_E1 settingJohn Su
2019-04-02mb/google/hatch: Re-configure GPP_A12 as GPO before entering sleepKrishna Prasad Bhat
2019-04-01mb/google/hatch: Unlock GPIO padsKrishna Prasad Bhat
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
2019-03-28mb/google/hatch/variants: Add DPTF based Fan controlSumeet Pawnikar
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 20:02:37 +0000