diff options
author | Edward O'Callaghan <quasisec@google.com> | 2020-06-22 11:50:49 +1000 |
---|---|---|
committer | Edward O'Callaghan <quasisec@chromium.org> | 2020-06-23 00:06:28 +0000 |
commit | e54487f207ccaa0bb616a02b14e9790617b50a06 (patch) | |
tree | ded73f83b6e1bf1dd0490c9983718d02f344dd43 /src/mainboard/google/hatch/variants/baseboard | |
parent | 6e5e24e2b307ec18a0eb36f2141349dcf0304907 (diff) |
mb/google/hatch: Make puff and variants share common mainboard.c
Here we consolidate some of the mainboard.c duplication between
Puff and it's variants.
Customizations can be done later via introducing a devicetree
parameterisation.
BUG=b:154071868
BRANCH=none
TEST=none
Change-Id: I75c2de7ae8efd544d800bc77e34e667c3afa4b01
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42672
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google/hatch/variants/baseboard')
-rw-r--r-- | src/mainboard/google/hatch/variants/baseboard/Makefile.inc | 1 | ||||
-rw-r--r-- | src/mainboard/google/hatch/variants/baseboard/mainboard.c | 169 |
2 files changed, 170 insertions, 0 deletions
diff --git a/src/mainboard/google/hatch/variants/baseboard/Makefile.inc b/src/mainboard/google/hatch/variants/baseboard/Makefile.inc index c0514376ac..c92d1bb641 100644 --- a/src/mainboard/google/hatch/variants/baseboard/Makefile.inc +++ b/src/mainboard/google/hatch/variants/baseboard/Makefile.inc @@ -6,6 +6,7 @@ romstage-y += gpio.c romstage-y += memory.c ramstage-y += gpio.c +ramstage-$(BOARD_GOOGLE_BASEBOARD_PUFF) += mainboard.c verstage-y += gpio.c diff --git a/src/mainboard/google/hatch/variants/baseboard/mainboard.c b/src/mainboard/google/hatch/variants/baseboard/mainboard.c new file mode 100644 index 0000000000..537e3df102 --- /dev/null +++ b/src/mainboard/google/hatch/variants/baseboard/mainboard.c @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <chip.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <ec/google/chromeec/ec.h> +#include <gpio.h> +#include <intelblocks/power_limit.h> +#include <soc/pci_devs.h> +#include <timer.h> + +#define GPIO_HDMI_HPD GPP_E13 +#define GPIO_DP_HPD GPP_E14 + +/* TODO: This can be moved to common directory */ +static void wait_for_hpd(gpio_t gpio, long timeout) +{ + struct stopwatch sw; + + printk(BIOS_INFO, "Waiting for HPD\n"); + stopwatch_init_msecs_expire(&sw, timeout); + while (!gpio_get(gpio)) { + if (stopwatch_expired(&sw)) { + printk(BIOS_WARNING, + "HPD not ready after %ldms. Abort.\n", timeout); + return; + } + mdelay(200); + } + printk(BIOS_INFO, "HPD ready after %lu ms\n", + stopwatch_duration_msecs(&sw)); +} + +/* + * For type-C chargers, set PL2 to 90% of max power to account for + * cable loss and FET Rdson loss in the path from the source. + */ +#define SET_PSYSPL2(w) (9 * (w) / 10) +#define PUFF_U22_PL2 (35) +#define PUFF_U62_U42_PL2 (51) +#define PUFF_CELERON_PENTIUM_PSYSPL2 (65) +#define PUFF_CORE_CPU_PSYSPL2 (90) +#define PUFF_MAX_TIME_WINDOW 6 +#define PUFF_MIN_DUTYCYCLE 4 + +/* + * mainboard_set_power_limits + * + * Set Pl2 and SysPl2 values based on detected charger. + * Values are defined below but we use U22 value for all SKUs for now. + * definitions: + * x = no value entered. Use default value in parenthesis. + * will set 0 to anything that shouldn't be set. + * n = max value of power adapter. + * +-------------+-----+---------+-----------+-------+ + * | sku_id | PL2 | PsysPL2 | PsysPL3 | PL4 | + * +-------------+-----+---------+-----------+-------+ + * | i7 U42 | 51 | 90 | x(.85PL4) | x(82) | + * | i3 U22 | 35 | 65 | x(.85PL4) | x(51) | + * +-------------+-----+---------+-----------+-------+ + * For USB C charger: + * +-------------+-----------------+---------+---------+-------+ + * | Max Power(W)| PL2 | PsysPL2 | PsysPL3 | PL4 | + * +-------------+-----+-----------+---------+---------+-------+ + * | n | min(0.9n, PL2) | 0.9n | 0.9n | 0.9n | + * +-------------+-----+-----------+---------+---------+-------+ + */ + +/* + * Psys_pmax considerations + * + * Given the hardware design in puff, the serial shunt resistor is 0.01ohm. + * The full scale of hardware PSYS signal 0.8v maps to system current 9.6A + * instead of real system power. The equation is shown below: + * PSYS = 0.8v = (0.01ohm x Iinput) x 50 (INA213, gain 50V/V) x 15k/(15k + 75k) + * Hence, Iinput (Amps) = 9.6A + * Since there is no voltage information from PSYS, different voltage input + * would map to different Psys_pmax settings: + * For Type-C 15V, the Psys_pmax sholud be 15v x 9.6A = 144W + * For Type-C 20V, the Psys_pmax should be 20v x 9.6A = 192W + * For a barral jack, the Psys_pmax should be 19v x 9.6A = 182.4W + */ +#define PSYS_IMAX 9600 +#define BJ_VOLTS_MV 19000 + +static void mainboard_set_power_limits(struct soc_power_limits_config *conf) +{ + enum usb_chg_type type; + u32 watts; + u16 volts_mv, current_ma; + u32 psyspl2 = PUFF_CELERON_PENTIUM_PSYSPL2; // default BJ value + u32 pl2 = PUFF_U22_PL2; // default PL2 for U22 + int rv = google_chromeec_get_usb_pd_power_info(&type, ¤t_ma, &volts_mv); + + struct device *dev = pcidev_path_on_root(SA_DEVFN_ROOT); + u16 mch_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff; + dev = pcidev_path_on_root(SA_DEVFN_IGD); + u16 igd_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff; + + /* use SoC default value for PsysPL3 and PL4 unless we're on USB-PD*/ + conf->tdp_psyspl3 = 0; + conf->tdp_pl4 = 0; + + if (rv == 0 && type == USB_CHG_TYPE_PD) { + /* Detected USB-PD. Base on max value of adapter */ + watts = ((u32)current_ma * volts_mv) / 1000000; + /* set psyspl2 to 90% of adapter rating */ + psyspl2 = SET_PSYSPL2(watts); + + /* Limit PL2 if the adapter is with lower capability */ + if (mch_id == PCI_DEVICE_ID_INTEL_CML_ULT || + mch_id == PCI_DEVICE_ID_INTEL_CML_ULT_6_2) + pl2 = (psyspl2 > PUFF_U62_U42_PL2) ? PUFF_U62_U42_PL2 : psyspl2; + else + pl2 = (psyspl2 > PUFF_U22_PL2) ? PUFF_U22_PL2 : psyspl2; + + conf->tdp_psyspl3 = psyspl2; + /* set max possible time window */ + conf->tdp_psyspl3_time = PUFF_MAX_TIME_WINDOW; + /* set minimum duty cycle */ + conf->tdp_psyspl3_dutycycle = PUFF_MIN_DUTYCYCLE; + /* No data about an arbitrary Type-C adapter, set pl4 conservatively. */ + conf->tdp_pl4 = psyspl2; + } else { + /* + * Input type is barrel jack, from the SKU matrix: + * 1. i3/i5/i7 SKUs use 90W BJ + * 2. Celeron and Pentium use 65W BJ (default) + */ + volts_mv = BJ_VOLTS_MV; + /* Use IGD ID to check if CPU is Core SKUs */ + if (igd_id != PCI_DEVICE_ID_INTEL_CML_GT1_ULT_1 && + igd_id != PCI_DEVICE_ID_INTEL_CML_GT2_ULT_5) { + psyspl2 = PUFF_CORE_CPU_PSYSPL2; + if (mch_id == PCI_DEVICE_ID_INTEL_CML_ULT || + mch_id == PCI_DEVICE_ID_INTEL_CML_ULT_6_2) + pl2 = PUFF_U62_U42_PL2; + } + } + /* voltage unit is milliVolts and current is in milliAmps */ + conf->psys_pmax = (u16)(((u32)PSYS_IMAX * volts_mv) / 1000000); + + conf->tdp_pl2_override = pl2; + conf->tdp_psyspl2 = psyspl2; +} + +void variant_ramstage_init(void) +{ + static const long display_timeout_ms = 3000; + struct soc_power_limits_config *soc_config; + config_t *conf = config_of_soc(); + + /* This is reconfigured back to whatever FSP-S expects by gpio_configure_pads. */ + gpio_input(GPIO_HDMI_HPD); + gpio_input(GPIO_DP_HPD); + if (display_init_required() + && !gpio_get(GPIO_HDMI_HPD) + && !gpio_get(GPIO_DP_HPD)) { + /* This has to be done before FSP-S runs. */ + if (google_chromeec_wait_for_displayport(display_timeout_ms)) + wait_for_hpd(GPIO_DP_HPD, display_timeout_ms); + } + /* Psys_pmax needs to be setup before FSP-S */ + soc_config = &conf->power_limits_config; + mainboard_set_power_limits(soc_config); +} |