| Age | Commit message (Collapse) | Author |
|---|
|
This patch avoids cannonlake base config to select eNEM for CAR by
default. Rather allow other SoC config to choose the applicable CAR
mode between eNEM and NEM.
CML and WHL select eNEM whereas CFL decided to use NEM for CAR setup.
Here is some background about why CFL SoC platform decided to choose
NEM over eNEM:
It was found that some coffeelake CPUs like Intel i3 9100E fail to enter
CAR mode because some MSR used by NEM enhanced are lacking. According to
the Intel SDM CPUID.EAX=07h.ECX=0 reg EBX[12 or 15] should indicate the
presence of IA32_PAR_ASSOC and CPUID.EAX=10h.ECX[1 or 2] reg ECX[2]
should indicate IA32_L3_QOS_CFG and IA32_L2_QOS_CFG respectively but
even on a Intel coffeelake CPU that works with the NEM_ENHANCED these
CPUID bits are all 0 so there is no way of knowing whether NEM_ENHANCED
will work at runtime. Instead just always use regular NEM.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibeaa4d53279ff9cbcd0b2ac5f2ad71925872355b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add assert for MT6366_VRF12, define a constant macro for 1200000.
BUG=none
TEST=build board starmie with mt8186.
Change-Id: I6d6a969ae993afcda0596a19928e8f98f343d589
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74394
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
To provide power to MIPI panel STA_HIMAX83102_J02, add support for
regulator VIO18.
BUG=b:272425116
TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie.
Change-Id: I3c3aa105e648b87fc39f881d762002f67b4422b5
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74341
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
|
|
Currently the xeon_sp code reassigns struct devices apic_id so that srat
entries can be added in a certain order.
This is not a good idea as it breaks thread local storage which contains
a pointer to its struct device cpu.
This moves the sorting of the lapic_ids to the srat table generation
and adds the numa node id in each core init entry. Now it is done in
parallel too as a bonus.
Change-Id: I372bcea1932d28e9bf712cc712f19a76fe3199b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68912
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Avoid asserts related to CNVi UPDs which are not boot critical.
Instead, add error messages which are more helpful in identifying
the issue.
BUG=none
TEST=Boot to the OS on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I49a988b7eda009456d438ba7be0d2918826e1c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74370
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ib4e21732ac31076a1a97a774e03c8466d17c5f29
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The reference to a constant FCH IOAPIC interrupt count used
with GNB IOAPIC was a bit obscure.
Change-Id: I2d862e37424f9fea7f269cd09e9e90056531b643
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch retrieves details of a specified firmware partition table.
The information retrieved includes the current firmware version and
other information about the firmware partition. The patch communicates
with the ME using the HECI command to acquire this information.
BUG=b:273661726
Test=Verified the changes for ISH partition on nissa board.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I0582010bbb836bd4734f843a8c74dee49d203fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Hook the newly created/exposed CnviWifiCore UPD up as a chip driver.
Enable this option by default to maintain the existing behavior.
BUG=b:270985197
TEST=Verified by enabling/disabling the UPD on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5b4662c2a064f7c9074797c8a2541dcf1dd686fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74306
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch updates total cpu count variable and total P-core count in
cpu_apic_info_type structure to `unsigned short int` to address more
cores.
TEST=Verify the build on Rex
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I46239cc7ad9870e7134955af56b9f6625be2b002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Processor attached memory should not use reserved_ram_from_to and
treat the calculation of gi_mem_size size as 64MB.
By default SOC_INTEL_HAS_CXL is enabled for Sapphire Rapids platforms,
this should fix small total memory issue. Before the fix running
command 'free -g -h' under Linux shows the total memory is only 1.4Gi,
after the fix it's showing the expected total memory size 15Gi.
Tested=On AC without attaching CXL memory, the total memory size is
the same as de-selecting SOC_INTEL_HAS_CXL.
On OCP Crater Lake with CXL memory attached, CXL memory can be recognized
in NUMA node 1:
numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 .. 59
node 0 size: 95854 MB
node 0 free: 93860 MB
node 1 cpus:
node 1 size: 63488 MB
node 1 free: 63488 MB
node distances:
node 0 1
0: 10 14
1: 14 10
Change-Id: I38e9d138fd284620ac616a65f444e943f1774869
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74296
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Use the common acpi_fill_root_complex_tom function instead of the SoC-
level northbridge_fill_ssdt_generator function that does basically the
same.
TEST=Resulting coreboot SSDT remains unchanged on Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0f100e0766ce0f826daceba7dbec1fb88492938
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This reverts commit dbb97c3243e55a0fd00e692d150c9d38d09b57af.
Reason for revert: dependency for revert CB:73903
Change-Id: Ibc81483239a13f456d20631725641b7219af4ef8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This reverts commit 6bfca1b689e48be4f72e8fa401f3558d845fc282.
Reason for revert: dependency for revert CB:73903
Change-Id: I56bab4d85d04e90cacfe77db59d0cde6a8a75949
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This reverts commit fd4ad29f1824ad5d8df67f3e30d3908d24cbd8a4.
Reason for revert: dependency for revert CB:73903
Change-Id: I5ed5e3e267032d62d65aef7fb246a075dccc9cf6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The Kconfig is only used in common code to gather the build time
maximum socket number FSP support. The same information is available
in FSP header as MAX_SOCKET, thus use the FSP as truth of source.
Currently MAX_SOCKET is 4.
Change-Id: I10282c79dbf5d612c37b7e45b900af105bb83c36
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74339
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I592c69e0f52687924fe41189b082c86913999136
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I2cb8676efc1aba1b154fd04c49e53b2530239b4c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Set the P2SB device as hidden as FSP-S is hiding the PCI configuration
space from coreboot on Alder Lake systems.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5cfde7c1f6791578a03d73e89bcde31af608f12d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
P2SB device is being hidden from coreboot by FSP-S. This breaks the
resource allocator which does not report P2SB BAR via intel common
block P2SB driver. Hook up the common block P2SB driver ops to
soc_enable function so that the resources will be reported. The P2SB
device must be set as hidden in the devicetree.
This fixes the silent resource allocation conflicts on machines with
devices having big BARs which accidentally overlapped P2SB BAR.
TEST=Boot MSI PRO Z690-A with multiple PCIe devices/dGPUs with big
BARs and see resource conflicts no longer occur.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7c59441268676a8aab075abbc036e651b9426057
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Printing the value of a variable is not informative for a normal user,
so decrease the value from BIOS_INFO to BIOS_DEBUG.
Fixes: b9caac74a320 ("soc/amd/mendocino: Reinterpret smu_power_and_thm_limit")
Change-Id: I22f6293fd47633dfdbdae37b7257f47a5a4bb29c
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Fix a couple of bugs in the _OSC method for handling
"PCI Host Bridge Device" on Xeon-SP.
- Drop the Sleep. The code doesn't write to hardware at all, so
there's no need to sleep here.
- Make sure that the number of DWORD passed in Arg2 is at least 3.
The existing check was useless as it would not create the
DWordField, but then use it anyways.
- Add check for CXL 2 device method calls which provide a 5 DWORD
long buffer to prevent buffer overflows when invoking the
"PCI Host Bridge Device" method.
Test:
Boot on Archer City and confirm that no ACPI errors are reported
for _OSC.
Change-Id: Ide598e386c30ced24e4f96c37f2b4a609ac33441
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
According to ADL PCH BIOS specification (DOC# 630603) ADL-S PCH
uses a fixed SBREG_BAR of 256MiB starting at 0xe0000000.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ied59a6dad8fb065dc3aeb6281bd32074aaa5e3b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Now the CPU topology is filled in struct device during mp_init.
Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch sends the CSE EOP command asynchronous implementation early
as part of `soc_init_pre_device`.
Without this patch the duration between asynchronous CSE EOP send and
receive commands is not ample whichcauses idle delay while waiting
for EOP response.
The goal of the CSE async implementation is to avoid idle delay while
capturing the response from CSE EOP cmd.
This patch helps to create ample duration between CSE EOP command
being sent and response being captured.
TEST=Able to boot google/marasov EVT sku to ChromeOS and observed
~30ms of boot time savings (across warm and cold reset scenarios).
Without this patch:
963:returning from FspMultiPhaseSiInit 907,326 (97,293)
...
...
115:finished elog init 967,343 (2,581)
942:before sending EOP to ME 967,821 (478)
…
16:finished LZMA decompress (ignore for x86) 1,017,937 (12,135)
943:after sending EOP to ME 1,067,799 (49,861)
…
…
1101:jumping to kernel 1,144,587 (13,734)
Total Time: 1,144,549
With this patch:
963:returning from FspMultiPhaseSiInit 918,291 (97,320)
942:before sending EOP to ME 918,522 (230)
...
...
16:finished LZMA decompress (ignore for x86) 1,029,476 (12,483)
943:after sending EOP to ME 1,033,456 (3,980)
...
...
1101:jumping to kernel 1,111,410 (14,007)
Total Time: 1,111,375
Change-Id: Idaf45ef28747bebc02347f0faa77cc858a4a8ef1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
PCIe bridges need to provide the LTR (latency tolerance reporting)
maximum snoop/non-snoop values so that they are inherited by downstream
PCIe devices which support and enable LTR. Without this, downstream
devices cannot have LTR enabled, which is a requirement for supporting
PCIe L1 substates. Enabling L1ss without LTR has unpredictable behavior,
including some devices refusing to enter L1 low power modes at all.
Program the max snoop/non-snoop latency values for all PCIe bridges
using the same value used by AGESA/FSP, 1.049ms.
BUG=b:265890321
TEST=build/boot google/skyrim (multiple variants, NVMe drives), ensure
LTR is enabled, latency values are correctly set, and that device
power draw at idle is in the expected range (<25 mW).
Change-Id: Icf188e69cf5676be870873c56d175423d16704b4
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74288
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Set NOR pin drive to 8mA to comply with HW requirement.
This implementation is according to chapter 5.8 and 5.19 in MT8188
Functional Specification.
BUG=b:270911452
TEST=boot with following logs
[DEBUG] mtk_snfc_init: got pin drive: 0x3
[DEBUG] mtk_snfc_init: got pin drive: 0x3
[DEBUG] mtk_snfc_init: got pin drive: 0x3
[DEBUG] mtk_snfc_init: got pin drive: 0x3
Change-Id: If8344449f5b34cefcaaee6936e94f7f669c7148b
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74064
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add GPIO driving functions to adjust pin driving.
This implementation is according to chapter 5.2 in MT8188 Functional
Specification.
BUG=b:270911452
TEST=build pass
Change-Id: I87cb8dc00c90fd5b3c0b8bdf5acb92b6f7393a73
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74063
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move GPIO driving-related functions to common for code reuse.
BUG=b:270911452
TEST=build pass
Change-Id: I234a2b7ef5075313144a930332bed10ffec00c6c
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74068
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create a new GPIO driving info table that contains only the pins used
in the bootblock. The GPIO driving info table is downsized from 1480
bytes to 24 bytes.
BUG=b:270911452
TEST=build pass
Change-Id: I24775ba93cd74ae401747c2f5a26bbf1c8f6ac0a
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74062
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Original lastbus configuration consumes constant memory size by
allocating 16 and 8 members arrays and the utilization is bad. Refactor
the lastbus structs to save memory usage.
BRANCH=none
BUG=none
TEST=bootblock.raw.bin size is reduced from 60328 bytes to 59048 bytes.
Change-Id: I07ff9ff7c75f03219e1792b92b62814293ef43fe
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74061
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently coreboot presents the BSP core first, then efficient cores and
Performance cores as indicated below:
```
/sys/devices/system/cpu/cpu0/topology/thread_siblings_list:0-1
/sys/devices/system/cpu/cpu4/topology/thread_siblings_list:4
/sys/devices/system/cpu/cpu5/topology/thread_siblings_list:5
/sys/devices/system/cpu/cpu6/topology/thread_siblings_list:6
/sys/devices/system/cpu/cpu7/topology/thread_siblings_list:7
/sys/devices/system/cpu/cpu1/topology/thread_siblings_list:0-1
/sys/devices/system/cpu/cpu2/topology/thread_siblings_list:2-3
/sys/devices/system/cpu/cpu3/topology/thread_siblings_list:2-3
```
Existing code presents mix of different cores to OS and causes CPU load
balancing and power/performance impact. So, the patch fixes this
disorder by ordering the Performance cores first, compute die efficient
cores next, and finally SOC efficient cores if they are present. This
is done to run the media applications in a power efficient manner,
please refer the ChromeOS patches for details:
https://chromium-review.googlesource.com/c/chromiumos/platform2/+/3963893
BUG=b:262886449
TEST=Verified the code on Rex system
After the fix:
```
/sys/devices/system/cpu/cpu0/topology/thread_siblings_list:0-1
/sys/devices/system/cpu/cpu1/topology/thread_siblings_list:0-1
/sys/devices/system/cpu/cpu2/topology/thread_siblings_list:2-3
/sys/devices/system/cpu/cpu3/topology/thread_siblings_list:2-3
/sys/devices/system/cpu/cpu4/topology/thread_siblings_list:4
/sys/devices/system/cpu/cpu5/topology/thread_siblings_list:5
/sys/devices/system/cpu/cpu6/topology/thread_siblings_list:6
/sys/devices/system/cpu/cpu7/topology/thread_siblings_list:7
```
Change-Id: I21487a5eb0439ea0cb5976787d1769ee94777469
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post
right after PCI enumeration and handle the command response at
`BS_PAYLOAD_BOOT'.
With these settings we have observed a boot time reduction of about 20
to 30 ms on brya0.
BUG=b:268546941
BRANCH=firmware-brya-14505.B
TEST=Tests on brya0 with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post after PCI initialization and EOP message received at
`BS_PAYLOAD_BOOT'.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Ib850330fbb9e84839eb1093db054332cbcb59b41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74215
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
coreboot supports three instances of sending EOP:
1. At CSE `.final' device operation
2. Early as with Alder Lake in chip_operations.init if
`SOC_INTEL_CSE_SEND_EOP_EARLY' is selected
3. At BS_PAYLOAD_BOOT as designed for Meteor Lake if
`SOC_INTEL_CSE_SEND_EOP_LATE' is selected
Currently, Alder Lake uses #3 as it results in better and more stable
boot time. However, what would deliver even better result is to not
actively wait for CSE completion.
This patch introduces a new `SOC_INTEL_CSE_SEND_EOP_ASYNC' Kconfig
which split the action of sending EOP request and receiving EOP
completion response from the CSE.
This patch used in conjunction with #1 can significantly
improves the overall boot time on a Raptor Lake design. For example
`SOC_INTEL_CSE_SEND_EOP_ASYNC' on a skolas board can deliver up to 36
ms boot time improvement as illustrated below.
| # | Late EOP | Async EOP |
|----------+----------+-----------|
| 1 | 1020.052 | 971.272 |
| 2 | 1015.911 | 971.821 |
| 3 | 1038.415 | 1021.841 |
| 4 | 1020.657 | 993.751 |
| 5 | 1065.128 | 1020.951 |
| 6 | 1037.859 | 1023.326 |
| 7 | 1042.010 | 984.412 |
|----------+----------+-----------|
| Mean | 1034.29 | 998.20 |
| Variance | 4.76 % | 5.21 % |
The improvement is not stable but comparing coreboot and FSP
performance timestamps demonstrate that the slowness is caused by a
lower memory frequency (SaGv point) at early boot which is not an
issue addressed by this patch.
We also observe some improvement on an Alder Lake design. For example,
the same configuration on a kano board can deliver up to 10 ms boot time
improvement as illustrated below.
| # | Late EOP | Async EOP |
|----------+----------+-----------|
| 0 | 1067.719 | 1050.106 |
| 1 | 1058.263 | 1056.836 |
| 2 | 1064.091 | 1056.709 |
| 3 | 1068.614 | 1055.042 |
| 4 | 1065.749 | 1056.732 |
| 5 | 1069.838 | 1057.846 |
| 6 | 1066.897 | 1053.548 |
| 7 | 1060.850 | 1051.911 |
|----------+----------+-----------|
| Mean | 1065.25 | 1054.84 |
The improvement is more limited on kano because a longer PCIe
initialization delays EOP in the Late EOP configuration which make it
faster to complete.
CSME team confirms that:
1. End-Of-Post is a blocking command in the sense that BIOS is
requested to wait for the command completion before loading the OS or
second stage bootloader.
2. The BIOS is not required to actively wait for completion of the
command and can perform other operations in the meantime as long as
they do not involve HECI commands.
On Raptor Lake, coreboot does not send any HECI command after
End-Of-Post. FSP-s code review did not reveal any HECI command being
sent as part of the `AFTER_PCI_ENUM', `READY_TO_BOOT' or
`END_OF_FIRMWARE' notifications.
If any HECI send and receive command has been sent the extra code
added in `cse_receive_eop()' should catch it.
According to commit 387ec919d9f7 ("soc/intel/alderlake: Select
SOC_INTEL_CSE_SEND_EOP_LATE"), FSP-silicon can sometimes (on the first
boot after flashing of a Marasov board for instance) request coreboot
to perform a global request out of AFTER_PCI_ENUM notification. Global
request relies on a HECI command. Even though, we tested that it does
not create any issue, `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag should not
be associated to the `SOC_INTEL_CSE_SEND_EOP_EARLY' flag to prevent
potential a global reset command to "conflict" with the EOP command.
This patch also introduces a new code logic to detect if CSE is in the
right state to handle the EOP command. Otherwise, it uses the
prescribed method to make the CSE function disable. The typical
scenario is the ChromeOS recovery boot where CSE stays in RO partition
and therefore EOP command should be avoided.
[DEBUG] BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 14 ms
[INFO ] HECI: coreboot in recovery mode; found CSE in expected
SOFT TEMP DISABLE state, skipping EOP
[INFO ] Disabling Heci using PMC IPC
[WARN ] HECI: CSE device 16.0 is hidden
[WARN ] HECI: CSE device 16.1 is disabled
[WARN ] HECI: CSE device 16.2 is disabled
[WARN ] HECI: CSE device 16.3 is disabled
[WARN ] HECI: CSE device 16.4 is disabled
[WARN ] HECI: CSE device 16.5 is disabled
BUG=b:276339544
BRANCH=firmware-brya-14505.B
TEST=Tests on brya0 with and `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post sent soon after FSP-s and EOP message receive at
`BS_PAYLOAD_BOOT'. Verify robustness by injecting a
`GET_BOOT_STATE' HECI command with or without `heci_reset'. The
implementation always successfully completed the EOP before
moving to the payload. As expected, the boot time benefit of the
asynchronous solution was under some injection scenario
undermined by this unexpected HECI command.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I01a56bfe3f6c37ffb5e51a527d9fe74785441c5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This function calls into `set_feature_ctrl_lock()` to lock
IA32_FEATURE_CONTROL MSRfeature control.
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie9a03ee6786144dae6fd3a18bcc53cb62919dd42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This function calls into `set_feature_ctrl_vmx_arg()`
to enable VMX for virtualization if not done by FSP (based on
DROP_CPU_FEATURE_PROGRAM_IN_FSP config is enabled) in MeteorLake
SoC based platform.
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7e49c15fd4f78a3e633855fea550720f0a685062
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This function performs locking of the AES-NI enablement state.
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I16f1c14d8a0ca927a34c295cb95311bd4972d691
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch calls into API to disable 3-strike error on
Meteor Lake SoC based platform.
TEST=Able to build and boot google/rex to ChromeOS.
Dumping MSR 0x1A4 shows BIT11 aka 3-strike error is disabled
```
localhost ~ # iotools rdmsr 0 0x1a4
0x0000000000000900
```
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5c33a1fa2d7e27ec8ffdea876edbb86adc3b45b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch introduces a new config named
`DROP_CPU_FEATURE_PROGRAM_IN_FSP` to avoid FSP running basic CPU
feature programming on BSP and on APs using the "CpuFeaturesPei.efi"
module.
Most of this feature programming is getting performed today in scope
of coreboot doing MP Init. Running this redundant programming in
scope of FSP (when `USE_FSP_FEATURE_PROGRAM_ON_APS` config is enabled)
results in CPU exception (for example: attempting to reprogram CPU
feature lock MSR is causing CPU exception).
SoC users should select this config after dropping "CpuFeaturesPei.ffs"
module from FSP-S Firmware Volume (FV). Upon selection, coreboot runs
those additional feature programming on BSP and APs.
This feature is by default enabled, in case of "coreboot running MP
init" aka `MP_SERVICES_PPI_V2_NOOP` config is selected.
At present, this option does not do anything unless any platform
eventually decides to drop FSP feature programming module and choose
coreboot CPU feature programming over it.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3be5329390401024d7ec9eed85a5afc35ab1b776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
In Intel designs, internal processor errors, such as a processor
instruction retirement watchdog timeout (also known as a 3-strike
timeout) will cause a CATERR assertion and can only be recovered from by
a system reset.
This patch prevents the Three Strike Counter from incrementing (as per
Intel EDS doc: 630094), which would help to disable Machine Check Catastrophic error. It will provide more opportunity to collect more useful CPU traces for debugging.
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I286037cb00603f5fbc434cd1facc5e906718ba2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74158
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Restrict DPTC to 15W boards, since we only have 15W values defined in
the devicetree. This will revert the 6W boards back to their default
values, rather than (incorrectly) configuring them with 15W values.
BUG=b:253301653
TEST=Verify DPTC values are set for 15W boards
TEST=Verify DPTC values are set not set for 6W boards
Change-Id: I94f3974fce6358e3cbb0c30c1af33eb7ecb29ad7
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74127
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The FSP will return the TDP in the format 0xX0000, where 'X' is the
value we're interested in. For example: 0xF0000 (15W), 0x60000 (6W).
Re-interpret the value so the caller just sees the TDP directly, without
needing to re-interpret things themselves.
BUG=b:253301653
TEST=Manually verify value is correct
Change-Id: I632e702d986a4ac85605040e09c1afab2bbdc59d
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74126
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop devicetree setting X2apic as the same functionality is already
exposed in Kconfig.
To activate X2apic select X2APIC_ONLY or X2APIC_RUNTIME in
the "APIC operation mode".
Note: Your OS must have support for X2APIC. If you are using less
than 256 CPU cores select XAPIC_ONLY here.
Test:
- Booted to OS in X2APIC mode when X2APIC_ONLY or X2APIC_RUNTIME
was selected.
- Booted to OS in XAPIC mode when XAPIC_ONLY was selected.
Change-Id: I65152b0696a45b62a5629fd95801187354c7a93b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When more than 255 CPU cores are present on a board
the X2APIC must be used.
Select DEFAULT_X2APIC_RUNTIME to support X2APIC by
default when a mainboard enables it in the devicetree.
Change-Id: I3e84cfbd2a7f05b142dc4d782764edce81646c8a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74184
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Inject ACPI code for all generated ASL templates.
This fixes ACPI errors shown in linux when not all sockets
are currently plugged in or some have been disabled.
Test:
Boot Archer City with CONFIG_MAX_SOCKET=4
Change-Id: I9562a37a92c6140a5623db3c8fb5972e6a90aaa4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74183
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
|
|
When 'use_rp_mutex' (default = 0) is set in the device tree, a root
port mutex will be added. This mutex is used in _ON and _OFF method,
where the GPIO reset and/or enable GPIO value is changed. The
companion driver, such as WWAN driver, needs to acquire this root
port mutex when accessing the same GPIO pins. Using this common mutex
prevents those invoked methods from being called from different thread
while one is not completed.
An example is that WWAN driver calling _RST method to reset the device
and does remove/rescan for the device while the pm runtime work might
call RTD3 _OFF.
For those root port without additional driver, this mutex is not needed.
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated and _ON and _OFF should use this
mutex.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ibc077528692b2d7076132384fb7bd441be502511
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
This reverts commit e7a1204f26fe3628de99b4ab4e3f32916565b95c.
This initial change was causing a boot failure when transitioning into
recovery mode.
BUG=b:276927816
TEST='emerge-brya coreboot chromeos-bootimage', flash and boot a skolas
SKU1 to kernel, then press Esc-Refresh-PowerButton to try to reboot into
recovery mode.
Change-Id: Ibebb20a000a239c344af1c96b8d376352b9c774e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74207
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 11f2f88a277124713f7b0023f078fcc2e1a98c32.
Revert initial change as it was causing a boot failure when
transitioning into recovery mode.
BUG=b:276927816
TEST='emerge-brya coreboot chromeos-bootimage', flash and boot a skolas
SKU1 to kernel, then press Esc-Refresh-PowerButton to try to reboot into
recovery mode.
Change-Id: I91c8d0434a2354dedfa49dd6100caf0e5bfe3f4c
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74206
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the newly introduced 'all_x86' make target to add the compilation
unit to all stages that run on the x86 cores, but not to verstage on
PSP.
TEST=Timeless builds for Mandolin without verstage on PSP and Guybrush
with verstage on PSP result in identical images with and without this
patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94de6de5a4c7723065a4eb1b7149f9933ef134a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74151
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Get boot performance timestamps from CSE and inject them into CBMEM
timestamp table.
990:CSME ROM started execution 0
944:CSE sent 'Boot Stall Done' to PMC 47,000
945:CSE started to handle ICC configuration 225,000 (178,000)
946:CSE sent 'Host BIOS Prep Done' to PMC 225,000 (0)
947:CSE received 'CPU Reset Done Ack sent' from PMC 516,000 (291,000)
991:Die Management Unit (DMU) load completed 587,000 (71,000)
0:1st timestamp 597,427 (10,427)
BUG=b:259366109
TEST=Able to see TS elapse prior to IA reset on Rex
Change-Id: I548cdc057bf9aa0c0f0730d175eaee5eda3af571
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73713
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
CSE performance data timestamps are different for version 1
Alder Lake/Raptor Lake and version 2 Meteor Lake. This patch
moves the current ADL/RPL timestamp definitions to a separate
header file. It marks current structure as version 1.
BUG=b:259366109
TEST=Boot to OS, check ADL/RPL pre-cpu timestamps.
Change-Id: I780e250707d1d04891a5a1210b30aecb2c8620d3
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73712
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
The i2c.c compilation unit is added to all stages in all cases, so use
the all target instead of adding it to all stages separately. Also order
the all targets alphabetically.
TEST=Timeless build on Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie90380075a3c87d226cdcb0f41f7e94275eaaa42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The Intel Power and Performance (PnP) team requested to update the
following:
- TDC settings for RPL-U 15W variant should be 22A.
- TDC settings for RPL-P 28W variant should be 33A.
BUG=b:275694022
BRANCH=firmware-brya-14505.B
TEST=PnP validated performance impact with these settings on both
RPL-U 15W and RPL-P 28W
Change-Id: I1141414785a990b975e32ebc03e490b83082aab7
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74046
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch defines acpi_set_cpu_apicid_order() which orders the APIC IDs
based on APIC IDs of Performance cores and Efficient cores, calculates
the total core count and total Performance cores count, populates the
information in the cpu_apicid_order_info struct.
The helper function useful to present the Performance and Efficient
cores in order to OS through MADT table and _CPC object.
TEST=Verify the build for Gimble (Alder Lake board)
Change-Id: I8ab6053ffd036185d74d5469fbdf36d48e0021ce
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72131
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to document 640858 MTL EDS Vol2, bit 18 (PWR_PERF_PLATFRM_OVR) of MSR_POWER_CTL must be set.
This patch is backported from
`commit 117770d32468e63df ("soc/intel/
alderlake: Enable Energy/Performance Bias control")`.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic83225b619c49db0b49b521a83a2f1dc1ad69be8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74155
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This updates energy performance preference value to all logical CPUs
when the corresponding chip config is true.
This patch is backported from
`commit 0bb2225718ef898c ("soc/intel/alderlake: Add EPP override
support")`.
BUG=b:266522659
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8172276159fe3987dae36ec30ebceb76dd0ef326
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74154
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the 28W TDP version of the ADL-P with MCHID 0x4629.
Verified that all 28W SoCs have the same PL1/PL2 defined
in Intel document #655258 "12th Generation Intel Core
Processors Datasheet, Volume 1 of 2".
Fixes the error seen in coreboot log:
[ERROR] unknown SA ID: 0x4629, skipped power Limit Configuration
Change-Id: Iad676f083dfd1cceb4df9435d467dc0f31a63f80
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
tsc_freq.c gets built into all stages, but the tsc_freq_mhz function it
implements calls the get_pstate_0_reg function which was only built into
ramstage. Since tsc_freq_mhz was only called in ramstage, commit
2323acab6a7a ("soc/amd/stoneyridge: implement and use get_pstate_0_reg")
didn't cause the build to fail, but better factor out the P-state-
related utility functions into a separate compilation unit and include
it in all stages that also include tsc_freq.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id3a3ee218f495be5e60a888944487704e7e8a1a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
monotonic_timer.c, tsc_freq.c and uart.c get added to all stage targets,
so just add those to the all stage targets. They still need to be added
to the smm stage target, since the all target doesn't add things to the
smm stage.
TEST=Timeless build results in identical image for Gardenia.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I16c02bc0ff54553f212b94d110abef6a7bdedbb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74144
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI support for Sapphire Rapids. Passes FWTS ACPI tests.
The code was written from scratch because there are Xeon-SP specific
implementation especially Integrated Input/Output (IIO).
Change-Id: Ic2a9be0222e122ae087b9cc8e1859d257e3411d6
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71967
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Intel FSP has "debug" build which is not public, used for debugging by
approved developers. Add a Kconfig to indicate that coreboot is building
with debug version of FSP so we can adjust few things (i.e. flash
layout) in the case.
BUG=b:262868089
TEST=Able to build and boot google/rex.
Change-Id: I5555a2ab4182ad0036c42be6fea3d934ffd0db8c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
PortUsb30Enable has been overridden unexpectedly, this patch fixed it.
BUG=b:276181378
Test=boot to rex and check USB3 ports are working.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Ic04b9eb236ed28a76ee516c52fc0c983cb8f2c0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch enables addition of core_type member to 'struct cpu_info'
for MeteorLake platform.
TEST=Build and verify the code for Rex
Change-Id: I01abed6b87bec2f8eb39bfc941faff070b83abe6
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74130
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Now that only one build target per stage is included in the build
depending on CONFIG_SOC_AMD_COMMON_BLOCK_TSC being set, don't use a
separate ifeq block for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id9e551b37707081eb2ea1d682013f57c7ca8aabd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74017
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All AMD SoCs with Zen-based CPU cores are already using timestamps based
on the TSC counter, so use the existing common infrastructure instead of
reimplementing it in a similar way.
The behavior of the code changes slightly, but results in identical
timestamps. The timestamp_get implementation in soc/amd/common/block/cpu
divided the result of rdtscll() in timestamp_get by the result of
tsc_freq_mhz() and didn't override the weak timestamp_tick_freq_mhz
implementation that returns 1. The non AMD specific code returns the
result of rdtscll() in timestamp_get, but returns tsc_freq_mhz() instead
of 1 in timestamp_tick_freq_mhz, so we still get the correct timestamps.
TEST=The raw timestamps printed on the serial console are now multiplied
by the expected factor of the TSC frequency in MHz.
TEST=Normalized timestamps printed on the serial console by the x86 code
don't change significantly on Mandolin when comparing before and after
this patch. A slight variation in the timestamps is expected. An example
would be:
Before: CPU_CLUSTER: 0 init finished in 630 msecs
After: CPU_CLUSTER: 0 init finished in 629 msecs
TEST=The calculations of the time spent in verstage on PSP before
entering the bootblock on Guybrush result in similar times when
multiplying the value before the patch with the TSC frequency in the
case with the patch applied. The raw values printed on the serial
console by the verstage on PSP use the 1us time base, but the timestamp
logs that end up in CBMEM will be fixed up to use the same time base as
the x86 part of coreboot.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I57b732e5c78222d278d3328b26bb8decb8f4783e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post
right after PCI enumeration and handle the command response at
`BS_PAYLOAD_BOOT'.
With these settings we have observed a boot time reduction of about 20
to 30 ms on brya0.
BUG=b:268546941
BRANCH=firmware-brya-14505.B
TEST=Tests on brya0 with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post after PCI initialization and EOP message received at
`BS_PAYLOAD_BOOT'.
Change-Id: I81e9dc66f952c14cb14f513955d3fe853396b21c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73922
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot supports three instances of sending EOP:
1. At CSE `.final' device operation
2. Early as with Alder Lake in chip_operations.init if
`SOC_INTEL_CSE_SEND_EOP_EARLY' is selected
3. At BS_PAYLOAD_BOOT as designed for Meteor Lake if
`SOC_INTEL_CSE_SEND_EOP_LATE' is selected
Currently, Alder Lake uses #3 as it results in better and more stable
boot time. However, what would deliver even better result is to not
actively wait for CSE completion.
This patch introduces a new `SOC_INTEL_CSE_SEND_EOP_ASYNC' Kconfig
which split the action of sending EOP request and receiving EOP
completion response from the CSE.
This patch used in conjunction with #1 can significantly
improves the overall boot time on a Raptor Lake design. For example
`SOC_INTEL_CSE_SEND_EOP_ASYNC' on a skolas board can deliver up to 36
ms boot time improvement as illustrated below.
| # | Late EOP | Async EOP |
|----------+----------+-----------|
| 1 | 1020.052 | 971.272 |
| 2 | 1015.911 | 971.821 |
| 3 | 1038.415 | 1021.841 |
| 4 | 1020.657 | 993.751 |
| 5 | 1065.128 | 1020.951 |
| 6 | 1037.859 | 1023.326 |
| 7 | 1042.010 | 984.412 |
|----------+----------+-----------|
| Mean | 1034.29 | 998.20 |
| Variance | 4.76 % | 5.21 % |
The improvement is not stable but comparing coreboot and FSP
performance timestamps demonstrate that the slowness is caused by a
lower memory frequency (SaGv point) at early boot which is not an
issue addressed by this patch.
We also observe some improvement on an Alder Lake design. For example,
the same configuration on a kano board can deliver up to 10 ms boot time
improvement as illustrated below.
| # | Late EOP | Async EOP |
|----------+----------+-----------|
| 0 | 1067.719 | 1050.106 |
| 1 | 1058.263 | 1056.836 |
| 2 | 1064.091 | 1056.709 |
| 3 | 1068.614 | 1055.042 |
| 4 | 1065.749 | 1056.732 |
| 5 | 1069.838 | 1057.846 |
| 6 | 1066.897 | 1053.548 |
| 7 | 1060.850 | 1051.911 |
|----------+----------+-----------|
| Mean | 1065.25 | 1054.84 |
The improvement is more limited on kano because a longer PCIe
initialization delays EOP in the Late EOP configuration which make it
faster to complete.
CSME team confirms that:
1. End-Of-Post is a blocking command in the sense that BIOS is
requested to wait for the command completion before loading the OS or
second stage bootloader.
2. The BIOS is not required to actively wait for completion of the
command and can perform other operations in the meantime as long as
they do not involve HECI commands.
On Raptor Lake, coreboot does not send any HECI command after
End-Of-Post. FSP-s code review did not reveal any HECI command being
sent as part of the `AFTER_PCI_ENUM', `READY_TO_BOOT' or
`END_OF_FIRMWARE' notifications.
If any HECI send and receive command has been sent the extra code
added in `cse_receive_eop()' should catch it.
According to commit 387ec919d9f7 ("soc/intel/alderlake: Select
SOC_INTEL_CSE_SEND_EOP_LATE"), FSP-silicon can sometimes (on the first
boot after flashing of a Marasov board for instance) request coreboot
to perform a global request out of AFTER_PCI_ENUM notification. Global
request relies on a HECI command. Even though, we tested that it does
not create any issue, `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag should not
be associated to the `SOC_INTEL_CSE_SEND_EOP_EARLY' flag to prevent
potential a global reset command to "conflict" with the EOP command.
BUG=b:276339544
BRANCH=firmware-brya-14505.B
TEST=Tests on brya0 with and `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post sent soon after FSP-s and EOP message receive at
`BS_PAYLOAD_BOOT'. Verify robustness by injecting a
`GET_BOOT_STATE' HECI command with or without `heci_reset'. The
implementation always successfully completed the EOP before
moving to the payload. As expected, the boot time benefit of the
asynchronous solution was under some injection scenario
undermined by this unexpected HECI command.
Change-Id: Ib09dcf9140eb8a00807a09e2af711021df4b416f
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73619
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In order for the code to find the correct VBIOS file in CBFS, remap the
revision ID in the RAVEN2_VBIOS_VID_DID case to the one that matches the
CBFS file name. This will make the code work as expected on devices with
the PCI ID RAVEN2_VBIOS_VID_DID and a revision != RAVEN2_VBIOS_REV.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94412dc2e778e7c4f74e475cd49114a00a81b2ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74045
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch enables addition of core_type member to 'struct cpu_info' for
Alderlake platform.
TEST=Build and verify the code for Gimble
Change-Id: Ia065b98c2013e78328fd38bed9c667792d6d1f4d
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74089
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The patch adds new member 'core_type' to the 'struct apic_path' and
updates core type information.
TEST=Build the code for MTL
Change-Id: I1d34068fd5ef43f8408301bf3effa9febf85f683
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74088
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Refactor map_oprom_vendev_rev as a preparation to also remap the
revision ID in the RAVEN2_VBIOS_VID_DID case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3b81a9464ed49672889fcb767920154fe6efdfcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Use enum cb_err as return value of fsp_find_range_hob instead of using
the raw -1 and 0 values. Also update the call sites accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id6c9f69a886f53868f1ef543c8fa04be95381f53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since the return value of the fsp_find_range_hob call is only used in
one location, move the call and return value check into the if condition
block to not need the status variable.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b9e9251368b86382dc4e050cf176db79dbfb230
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch avoids the redundant programming of SRAM BAR when
the SRAM PCI device is enabled. Rather read the PCH SRAM Base
Address Register while enabling crashlog feature.
Additionally, this patch relies on PCI enumeration to get the
SRAM BAR rather than hijacking the SPI temporary base address
which might have resulted in problems if SPI is disabled on
some platform with BAR being implemented.
TEST=Able to build and boot google/marasov and crashlog is working.
Change-Id: I8eb256aa63bbf7222f67cd16a160e71cfb89875a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Instead of using the PSTATE SSDT generated by binaryPI, use the common
AMD code by selecting SOC_AMD_COMMON_BLOCK_ACPI_CPU_POWER_STATE. To
match the SSDT from binaryPI, set ACPI_SSDT_PSD_INDEPENDENT to n. There
are two differences to the binaryPI SSDT: Now coreboot includes the C1
state in the _CST package instead of just having the kernel add this due
to the ACPI_FADT_C1_SUPPORTED bit being set and the address of the
PS_STS_REG P state status MSR is written to the corresponding field of
the _PCT package instead of being 0.
TEST=On Careena the new P and C state ACPI packages are nearly identical
to the ones from the SSDT from binaryPI with the two functional
differences mentioned above.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icdf6bc8f0e0363f185a294ab84edcb51322e7eb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Both the algorithm and the registers involved are described in the
public version of BKDG #55072 Rev 3.09 in chapter 2.5.2.1.7.3.2 _PSS
(Performance Supported States).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9b2c177d9d80c5c205340f3f428186d6b8eb7e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The help text for VGA_BIOS_SECOND_ID was outdated and from a time before
we found out that just looking at the CPUID doesn't reliably tell us on
which type of silicon we're running and which VBIOS file to pick, so we
had to use a different method. Update the help text to match what the
code does.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia568771ed7dfa0c7bb850b0efcd2959d7ddfd4a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73335
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
On the Zen-based CPUs, the transition and bus master latency are always
written as 0, but on but on Stoneyridge hardware-dependent values are
used. Introduce get_pstate_latency that returns 0 for all non-CAR AMD
CPUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I81086fa64909c7350b3b171ea6ea9b46f1708f67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Introduce get_pstate_0_reg and use it in tsc_freq_mhz to get the P state
register number corresponding to P state 0.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b92a858bf36b04a570d99c656e5ccfc84457724
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
On the Zen-based CPUs, P state 0 corresponds to the first P state MSR,
but on Stoneyridge this isn't the case. Introduce get_pstate_0_reg that
returns 0 for all non-CAR AMD CPUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icc11e5b6099d37edb934e66fe329d8013d25f68d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Factor out the MSR access into a function with a more descriptive name.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I331c3205390edcbd8749b2d52b7cc7ac3a8ced5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The C state ACPI packages binaryPI generates and passes to coreboot in
the PSTATE SSDT only include the C2 state, but the kernel will add the
C1 state to its usable C states in this case. The native C state code
will generate both the C1 and C2 state packages to be more complete and
also to be more in line with the other AMD SoCs.
The code added in this commit isn't used yet, but will be used as soon
as Stoneyridge will be using the common AMD generate_cpu_entries by
selecting SOC_AMD_COMMON_BLOCK_ACPI_CPU_POWER_STATE once all needed
helper functions are implemented for Stoneyridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06f90306ac196704e0102d0da6eab03f51513c29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option is valid for all SoCs
with Zen-based CPU cores including the family 1Ah, so remove the suffix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I58d29e69a44b7b97fa5cfeb0e461531b926f7480
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move the static mhz variable inside the only function that is accessing
it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ief98c0a1c35fe1bbc4ff38dd175f12e0b3ddc515
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use get_pstate_core_freq instead of open-coding the calculations in
tsc_freq_mhz. In the case of the CPU frequency divider being 0,
get_pstate_core_freq will return 0; in this case that shouldn't happen,
TSC_DEFAULT_FREQ_MHZ will be used as frequency, since for the TSC
frequency it's better to err on the end of the expected frequency being
too high which will cause longer than expected delays instead of too
short delays.
Now that the code is using get_pstate_core_freq, this code is valid for
Glinda too, so also remove the comment on the
SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option being selected in the Glinda
Kconfig. This Kconfig option will be renamed in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01168834d4018c92f44782eda0c65b1aa392030d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use get_pstate_core_freq instead of open-coding the calculations in
tsc_freq_mhz.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If5d526e6b365c62a6669241f4fcdd25eca3f15fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This function will be used in follow-up patches for both the TSC rate
calculation and the still to be implemented P state ACPI table
generation in coreboot. The was checked against BKDG 52740 Rev 3.05,
BKDG #55072 Rev 3.04, and BKDG #50742 Rev 3.08.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9afaa044da994d330c3e546b774eb1f82e4f30e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Factor out the get_pstate_core_freq function from the SoC's acpi.c files
to both avoid duplication and to also be able to use the same function
in the TSC frequency calculation in a follow-up patch. The family 17h
and 19h SoCs use the same frequency encoding in the P state MSRs while
the family 1Ah SoCs use a different encoding. The family 15h and 16h
SoCs use another encoding, but since this isn't implemented in
Stoneyridge's acpi.c, this will be added in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8619822c2c61e06ae5db86896d5323c9b105b25b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Due to a non-constant TSC rate before the microcode update is applied,
the Performance Time Stamp Counter is used instead. To clarify this, add
a comment to the timestamp_get implementation. See commit 24079323d4d8
("soc/amd/stoneyridge: provide alternate monotonic timer") and the
description of the TscInvariant bit in CPUID Fn8000_0007_EDX Advanced
Power Management Information in the public version of BKDG #55072 Rev
3.09 for more details.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I824b372c36fa6f3eb912469b235a9474f6a58ff5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add UPD parameter for eDP power sequence adjust.
The pwr_on_vary_bl_to_blon is set one unit per 4ms.
BUG=b:271704149
TEST=Build; Verify the UPD was pass to system integrated table;
measure the power on sequence on whiterun
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I25c9f962e70f599c780259f0943a03f8aa7cbfd1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
From Meteor Lake onwards Intel FSP will generate the Trace Hub related
HOB if the Trace Hub is configured to save data in DRAM. This memory
region is used by Trace Hub to store the traces for debugging purpose.
This driver locates the HOB and marks the memory region reserved so
that OS does not use it.
Intel Trace Hub developer manual can be found via document #671536 on
Intel's website.
Change-Id: Ie5a348071b6c6a35e8be3efd1b2b658a991aed0e
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch adds a check for zero based SRAM base address. It will
help to avoid running into problems if the SRAM is disabled and
the base address register is zero.
TEST=Able to build and boot google/marasov with PCH SRAM being
disabled.
Change-Id: Iebc9dc0d0851d5f83115f966bf3c7aad1eb6bc01
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2021a106e0d3a603b1a05296411700ffea32fc8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move map_oprom_vendev to graphics.c to match the other AMD SoCs. Also
change the comment style to be more in line with the rest of coreboot
and drop the unneeded line break in the printk call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icc1f3d73fba973413c5a22e2f5ae01bc58bc3e76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Fix the VGA_BIOS_ID IDs to match the PCI IDs in the VBIOS binaries and
the PCI ID Stoneyidge's map_oprom_vendev returns. This fixes the problem
that the display wasn't initialized due to not finding the VBIOS file in
CBFS. This bug in the Stoneyridge Kconfig was unmasked by commit
42f0396a1028 ("device/pci_rom: rework PCI ID remapping in
pci_rom_probe").
TEST=Display in Careena lights up again.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d1e6a3a65d7d7b07f49df9ce90620b79d9a2d78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74019
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change to use simple device function for setting PMAX_LOCK because
the Sapphire Rapids PCU device is not scanned during coreboot PCIe
bus scan and would see "PCI: dev is NULL!" failure.
Change-Id: I3156a6adf874b324b5f4ff5857c40002220e47ab
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72400
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Stoneyridge uses the serial voltage ID 2 standard to tell the VRM on the
board which voltage it wants, so select the SOC_AMD_COMMON_BLOCK_SVI2
Kconfig option to have the corresponding code to decode the raw SVI2
value into a voltage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7d7031d9ad997a86c18d0e9e7af9a88ddf2d873c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb6087dc44e76ab63bc6b462c3328c23d83ae018
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74009
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A core voltage ID larger than 0xff shouldn't happen, since SVI2's core
VID is only 8 bit long. In order for making it more difficult to use
this function in a wrong way that results in a very wrong voltage being
returned, also return 0 for those invalid core VID values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I95417c45db86cd2373879cdad8a07fb9eb8dfdda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74000
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UPD usb3_port_force_gen1 to support USB3 port force to gen1
BUG=b:273841155
BRANCH=skyrim
TEST=Build, verify USB3 port setting to gen1.
Change-Id: Iaa476f56cf10588d7de2203deca4122958c00783
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
