aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya
AgeCommit message (Collapse)Author
2021-09-29mb/intel/adlrvp, mb/google/brya: Add ADLP 242 PLx configurationsTracy Wu
Add ADLP 242 sku PLx related settings, which follow the settings of ADLP 282 sku (both are 15w). BUG=b:201253904 TEST=USE='fw_debug' emerge-brya intel-adlfsp coreboot chromeos-bootimage Change-Id: If9b60893ab3e2c4a88e7d2cf45223c5fbce6f847 Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-29mb/google/brya: Update PCH power cycle related durationsTim Wawrzynczak
The voltage rail discharge times have been measured, so therefore the boot time on a cold boot when the CSE must go through a global reset and thus a trip to S5 can be optimized. Select the lowest applicable value for each PchPmSlp UPD that can be used with these measurements. This is programmed in the baseboard because the measured discharge times leave (what should be) plenty of margin for variants to also not violate any power sequencing guidelines from the PDG. BUG=b:184799383 TEST=verified time in S5 during a global reset is ~1s instead of 4s Change-Id: Ia373c47b3967d68ddac21707c6eb4565d9d6519e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-09-28mb/google/brya/variants/taeko: add NVMe GPIOs to early_gpio_tableKevin Chang
NVMe needs extra time to run boot process, enable power and deassert reset for NVMe earlier in the boot flow that taeko can successfully boot into OS with non-serial coreboot. BUG=b:199969366 & b:200711149 TEST=Build FW and test with non-serial FW reboot 20 times pass. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I032c5b90fb2148c4075d6ead3e4161c0cc659b20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-28mb/google/brya/primus: modify HID to MX98360A for next build phaseMalik_Hsu
For the next build phase, modify the HID of the speaker amp to MX98360A. BUG=b:199098681 BRANCH=none TEST=build coreboot without error Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I0c318464fca7d35bbffd7ea0f5694b83acedff0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27mb/google/brya/var/kano: Move max98373 amp ACPI info to I2C0David Wu
Move max98373 amp ACPI info to I2C0 according to kano's schematics version KANO_MLB_Proto_0811. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8f7a7938dd407666e0104ba64b22da85216a145f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27mb/google/brya: Correct SSD power sequenceEric Lai
SSD sometimes can't be detected in in warm/cold boot stress. M.2 spec describes SSD_PREST should be sequenced after power enable. BUG=b:199822704 TEST=SSD was always discovered in warm/cold boot stress. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If0a9e36cda4dc91bbccec02f39ccb9b658d24056 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/variants/primus: config dram speed to 3733Casper Chang
This change config the DRAM speed to 3733 for primus. BUG=b:200752480 BRANCH=none TEST=Verified that `dmidecode -t17` shows the correct configured memory speed Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I2f3a9489dddcf102b0ffc71eb9cdab6ad38d1391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/taeko: Enable SaGv supportJoey Peng
Enable SaGv support for taeko BUG=b:198548214 TEST=FW_NAME=taeko emerge-brya coreboot Flash fw into DUT and can boot successfully Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I580a12ca511d8cde6fee1079e39e6976202da4d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Set vGPIO configurationDavid Wu
Due to the vGPIO is not set correctly, without setting those pins for PEG60, CPU cannot communicate with PCH about the clkreq state. BUG=b:200886824 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I6adf73103ecb02c67d9a199e13d2ead9b8b2276f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Enable EC keyboard backlightDavid Wu
Enable EC keyboard backlight for kano. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I7f56b92b60cadf72eb02fd8bcb87baf36acc16e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Enable SaGv supportDavid Wu
Enable SaGv support for kano BUG=None TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ifc537a5137f5e6eb10cd4c160923ea4da1f6b0d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/brya/variants/gimble: Update DPTF sensorsMark Hsieh
Add two thermal sensors for fan and charger for DPTF based thermal control. BUG=b:199180746 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I1529dd5dff3445dd499ed665386a9b06d67c7028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57833 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/google/brya/variants/gimble: Update audio settingMark Hsieh
Add vmon-slot-no,imon-slot-no and dsm_param_file_name in overridetree.cb BUG=b:197701952 TEST=build and check SSDT Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ie646360c4ebbf25762b374c5bc3ef2017989fb2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57832 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/google: Bulk rename mem_list_variant.txt to mem_parts_used.txtReka Norman
The variant creation script creates a placeholder file called mem_parts_used.txt, with the intent that variant owners will populate this file with memory parts as needed. But instead, some partners have been adding the parts in a new file called mem_list_variant.txt and removing the placeholder file. E.g. https://review.coreboot.org/55735. There's nothing wrong with this, but it's confusing to have two different file names which serve the same purpose. Bulk rename all the mem_list_variant.txt files to mem_parts_used.txt. The only time these file names are used is as an argument to the spd_tools part_id_gen script, so no other changes are necessary. BUG=None TEST=Re-run part_id_gen for all variants of brya/volteer/dedede/guybrush/zork. Check that the only change is to the "Generated by" comment in Makefile.inc and dram_id.generated.txt. Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Icdeee78ae5c01e97f66c759c127175b4962d5635 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/brya/var/anahera: Update gpio and devicetreeWisley Chen
Based on latest shcematic to update the device tree and gpio. BUG=b:197850509 TEST=FW_NAME=anahera emerge-brya coreboot Change-Id: I0a999de479c7b2e4776a57e1e56b1568450ec31a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/brya: Migrate brya to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all brya variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for anahera: util/spd_tools/bin/part_id_gen \ ADL \ lp4x \ src/mainboard/google/brya/variants/anahera/memory \ src/mainboard/google/brya/variants/anahera/memory/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/brya -a -x --timeless Change-Id: I08efe1d75438c81161d9b496af2fa30ce6f59ade Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/brya/var/taeko: Correct IOM port configurationJoey Peng
Enable programming of Type-C AUX DC bias GPIOs. BUG=b:199833078 TEST=Verify that a Type-C monitor works when connected in both orientations. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I4f6d80a9f2fc8cdc93226d6c234b54e5db830d71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-22mb/google/brya/var/redrix: Update audio settingWisley Chen
Update codec/amp setting. 1. Update hid for ALC5682VS 2. Add maxim properties. BUG=b:197076844 TEST=build and check SSDT Change-Id: I8bedd4d0737caf46769ad27bce1768c225ce8a82 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-22mb/google/brya/var/redrix: Correct SSD power sequenceWisley Chen
The current power sequencing for the SSD does not work in a non-serial enabled BIOS image. It appears that the FSP scans the PCIe RPs before the SSD has time to prepare itself for PCIe, so the FSP disables the RP and so depthcharge cannot find a boot disk. Changing the power sequence timing to enable power in bootblock and deassert reset in ramstage follows the SSD's power sequence and allows it to be discovered by the FSP so the RP does not get disabled. BUG=b:199714453 TEST=build, boot into SSD, and run reboot stress test. Change-Id: I5e7943a6cc88bc02bcbd97a1086b2d8044d7b1c3 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya: Switch to using device pointers using alias namesFurquan Shaikh
This change replaces the device tree walks with device pointers by adding alias for dptf_policy generic device in the tree. Change-Id: I8fd5476a9cea84ab8b2678167b3e0504eecacf6c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya/var/redrix: Enable EC keyboard backlightWisley Chen
Enable EC keyboard backlight for redrix. BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage Change-Id: I175d8b91b37c6645ab1a7f05fc6915b3b016e3ff Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya/var/redrix: Get wifi sar nameWisley Chen
Add get_wifi_sar_cbfs_file_name() to return the wifi SAR file name BUG=None TEST=FW_NAME=redrix emerge-brya coreboot Change-Id: I87e7a30619fd93d0eae692c4c540c29850ff6721 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya: Add CHROMEOS_WIFI_SARWisley Chen
Add CHROMEOS_WIFI_SAR to include the SAR configs. BUG=None TEST=FW_NAME=redrix emerge-brya coreboot Change-Id: I50a413f3425d0b0e0b5ce71dabf6b9477800795e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya/var/felwinter: Configurate AUX pin for USB3 MBEric Lai
USB3 MB doesn't have re-timer. Thus we have to configurate the AUX pin. For now, we use USB3 DB to determine the USB3 MB. BUG=b:197907500 TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ide45c77e0a6f736a02d5dc9ad05aa1ef9e754fa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya/var/redrix: Update thermal table.Wisley Chen
Update thermal setting from thermal team. BUG=b:200134784 TEST=build and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: If74c3bc19cf4abd64d646b842cbb6a61b910e933 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-17mb/google/brya/primus: add NVMe power and reset pin to early_gpio_tableMalik_Hsu
NVMe needs extra time to run boot process, enable power and deassert reset for NVMe earlier in the boot flow that primus can successfully boot into OS with non-serial coreboot. BUG=b:199967106 TEST=USE="project_primus" emerge-brya coreboot and verify it builds without error. Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I9c66efe96515347502d059556052c764c1be5d09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-17mb/google/brya/var/redrix: Enable USB4 PCIe resourcesWisley Chen
Enable USB4 PCIe resources for redrix BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage Change-Id: I759618055b1282653d8a05fa66e8cdab0c43e3a6 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-17mb/google/brya: Add WWAN poweroff sequenceEric Lai
Follow FIBOCOM_L850-GL Hardware User Manual_V1.0.8. BUG=b:180166408,b:187691798 TEST=measure WWAN power off by scope is meeting the spec. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I6b2725cd61d5b54bc7fd70a9daffd29e7b43690b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-16vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_mainHsuan Ting Chen
vboot_reference is introducing a new field (ctx) to store the current boot mode in crrev/c/2944250 (ctx->bootmode), which will be leveraged in both vboot flow and elog_add_boot_reason in coreboot. In current steps of deciding bootmode, a function vb2ex_ec_trusted is required. This function checks gpio EC_IN_RW pin and will return 'trusted' only if EC is not in RW. Therefore, we need to implement similar utilities in coreboot. We will deprecate vb2ex_ec_trusted and use the flag, VB2_CONTEXT_EC_TRUSTED, in vboot, vb2api_fw_phase1 and set that flag in coreboot, verstage_main. Also add a help function get_ec_is_trusted which needed to be implemented per mainboard. BUG=b:177196147, b:181931817 BRANCH=none TEST=Test on trogdor if manual recovery works Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: I479c8f80e45cc524ba87db4293d19b29bdfa2192 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57048 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/brya/variants/gimble: Add fw_config probe for ALC5682-VD/ALC5682-VSMark Hsieh
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name. Update hid name depending on the AUDIO field of fw_config. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:200009010 TEST=ALC5682-VD/ALC5682-VS audio codec can work Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I09c7830fff6b318cf1a1f4a44ee0a819691f7c58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57673 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/brya/variants/kano: Add MIPI camera supportDavid Wu
Add MIPI camera support for OVTI2740 BUG=b:196937374 b:194926283 TEST=Build and boot on Kano Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I248c64b9460c898f9faa5f7ac8cf339a9c814013 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-16mb/google/brya/var/redrix: Add fw_config probe for eKT3764/eKT3644Wisley Chen
Report different ACPI device depending on TP_SOURCE field of fw config (SSFC-bit8~bit9) for elan touchpad. BUG=b:199503876 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I15781c2d942d81e11c296ea2f2586ba82f67e4a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-16mb/google/brya/var/redrix: Select camera module based on SSFC valueArec Kao
This patch has changes to support multiple camera modules, base on the value set in the SSFC_CONFIG. BUG=b:198235323 TEST=tested the changes with redrix 5MP(ov5675/hi556) camera. Change-Id: I71c8355617171ec7d08862759b87d4bf12ce2924 Signed-off-by: Arec Kao <arec.kao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57272 Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/brya: Fix brya0 WWAN poweron sequencingTim Wawrzynczak
The PCIe WWAN module used on brya0 requires control over 4 signals to successfully power it on. It is desirable to do this before passing control to the payload, because the modem requires a ~10 seconds initialization phase before it can be used. The corrected sequence looks like: 1) Drive device into full reset and enable power in bootblock 2) Deassert FCPO in romstage, after power rails stabilize 3) Deassert WLAN_RST#, then WLAN_PERST# in ramstage BUG=b:187691798 Change-Id: I10f15a4dcfd86216c334fb24b4693ea250d35ee4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-16mb/google/brya: Update state of BB_RT_FORCE_PWR gpiosTim Wawrzynczak
This GPIO is used to force the USB retimers on Type-C ports to stay in a powered state and can be used e.g., during a firmware update to the retimer to force power on even when no device may be connected to the port. However, its power rail is controlled elsewhere and coreboot is not applying a FW update, so this GPIO should be driven low instead. BUG=b:193402306 TEST=compile Change-Id: I976a0b8252b31aacef476d5ee4bcf6b1ef2e79de Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-09-16mb/google: Unify all variants to start with "-> "Martin Roth
All variants originally had been changed to start with an arrow with two spaces following it to line up with the platform name. A number of recent platforms were added only using a single space. This change updates them all to have two spaces so they line up again. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Iab9e6207fff5a7d2f6d76e5ca33eeaca721a224f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-16soc/intel/alderlake: Select SOC_INTEL_COMMON_BLOCK_TCSS at SoC levelSubrata Banik
This patch selects SOC_INTEL_COMMON_BLOCK_TCSS from Alder Lake SoC Kconfig and drops SOC_INTEL_COMMON_BLOCK_TCSS Kconfig selection from specific mainboard (brya) to ensure all Alder Lake mainboards can make use of common TCSS block. BUG=b:187385592 TEST=Type-C pendrive/Gen-2 SSD detected as Super speed. Change-Id: I85f6a967eb34ea760418131a9586bfdeb13c9b5d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-16mb/google/brya/var/redrix: Add privacy screenWisley Chen
Add privacy screen support. BUG=b:198188272 TEST=build and check SSDT Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Ied9d9138f68ba45c4d746aed1cd3f828d4ab7fae Reviewed-on: https://review.coreboot.org/c/coreboot/+/57289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-15mb/google/brya/variants/gimble: update fw_config for next build phaseMark Hsieh
Update audio FW config based on the schematic carbine_adl-p_evt_20210901.pdf BUG=b:199180746 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4f8ee1a97dd92c7aa0131cd0a77b05f851a26b05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57529 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-15mb/google/brya/var/felwinter: Add R4/R5 for dmicEric Lai
Based on latest schematic (0903) update the GPIO table. BUG=b:197308586 BRANCH=None TEST=emerge-brya coreboot Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie79ba14859f7fa4ea66a0f0d58287f4515d01baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/57636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-09-15mb/google/brya: Add support for romstage GPIO tableTim Wawrzynczak
Some variants may require more complex power sequencing than can be accomodated with just 2 GPIO tables, therefore introduce one in romstage as well. BUG=b:187691798 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7a63a2ee2cd036b9ae5822be9c87d8a026a54922 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-15mb/google/brya: Enable USB4 PCIe resources for kanoDavid Wu
Enable USB4 PCIe resources for kano BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Iec914db6914116ebc914a2ba9ff67344b202926b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-15brya/gimble: add `get_wifi_sar_cbfs_filename()` in variant.cMark Hsieh
gimble only uses one WiFi SAR table, contained in a file named wifi_sar_0.hex BUG=b:189068477 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ied030b79183cc6f962674260e7a82a7261b317ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/57616 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-11mb/google/brya: Replace white space with tabSubrata Banik
This patch unifies line indentation. Change-Id: Ieeb580057d8abb20afe3a5d73f5f835e6d31c899 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-09mb/google/brya/variants/kano: Update GPIOs config for kanoDavid Wu
Update the GPIO configuration to match the latest schematic. BUG=b:192370253 BRANCH=None TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I96be95a127f42b005d97a3c02650af13419524a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-09mb/google/brya/variants/primus: update for next build phaseMalik_Hsu
According to the schematic diagram of version C14_MB_20210902A_SB, modify the settings of GPIO and fw_config. BUG=b:197700276 BRANCH=none TEST=emerge-brya coreboot Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I14907faeb631193715b1e0e451e427fb79a68279 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-09mb/google/brya/variants/taeko: Add initial fw config for taekoJoey Peng
According to config.star fw mask definition, add initial FW_CONFIG id. BUG=b:194649740 TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage Cq-Depend: chrome-internal:4072654 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ifef750338d777b76e9710d6bca9a166120db6a0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-08mb/google/brya/var/redrix: Enable SaGv supportWisley Chen
Enable SaGv support for redrix BUG=b:198536984 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I54402dfde5db4106a4e0d891c19592fda39a1099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-07mb/google/brya/variants/gimble: update fw_config.c for next build phaseMark Hsieh
Update fw_config.c based on the schematic carbine_adl-p_evt_20210901.pdf BUG=b:190688567 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I240c0cd777d215e46a0a661aaac63a187311019d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-07mb/google/brya/variants/gimble: add GPP_B4 and GPP_D11 to early_gpio_tableMark Hsieh
NVMe needs extra time to run boot process, enable power and deassert reset for NVMe earlier in the boot flow that gimble can successfully boot into OS with non-serial coreboot. BUG=b:198405404 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ib76965db2a6cd0c19be4043fec73af297a619c7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57359 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-07mb/google/brya/variants/gimble: Enable SaGv supportMark Hsieh
This patch enables SaGv support for gimble. BUG=b:198531517 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I29887418827614afb10558c6958c9c5e9667079e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marx Wang <marx.wang@intel.com>
2021-09-07mb/google: Add board name comments for each boardMartin Roth
Roughly half the boards had a "title" comment for the board. This adds it for the rest of the boards to make everything consistent. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ib941318842136212727f56fc6130381c5c9cd55b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-06soc/intel/adl: Move USB4 hotplug Kconfig to commonFurquan Shaikh
This change adds a new Kconfig `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES` that can be selected by mainboard to reserve hotplug resources for USB4 at the SoC level. `ADL_ENABLE_USB4_PCIE_RESOURCES` is dropped from soc/intel/alderlake and instead the newly added Kconfig is now used. This new Kconfig is added so that the same config can be used across different platforms. In following changes, this Kconfig is utilized by TGL as well. Change-Id: Id7c359a0e255c43c2732f6cbe287bc7da14a46e3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-03mb/google/brya/variants: fix override values for power limitsSumeet Pawnikar
There are two different types of 682 SKU available with TDP of 28W and 45W. This patch fix override values for power limits for these 682 SKU. This patch also sets power limit values dynamically based on machine ID and CPU TDP of SKU. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I796e56321ae9c8312530a4b8986cd73a2245f5fa Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57290 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03src/*: Specify type of `DIMM_SPD_SIZE` onceAngel Pons
Specify the type of the `DIMM_SPD_SIZE` Kconfig symbol once. Change-Id: I619833dbce6d2dbe414ed9b37f43196b4b52730e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-02mb/google/brya: reduce RW_MRC_CACHE size to 64KNick Vaccaro
The RW_MRC_CACHE only needs to be 64K for Brya. BUG=none TEST="emerge-brya coreboot chromeos-bootimage", flash and boot brya0 to kernel. Change-Id: I74365b795e184b92f483ae2bf862791e235c5362 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56989 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-02mb/google/brya: Fix Idle S0ix issue due to dynamic GPIO PM disabledMeera Ravindranath
GPIO PM was disabled for brya to evaluate if longer interrupt pulses are required for ADL. Since ADL requires 4us long pulses (EDS:626817), GPIO PM can be enabled. All devices currently tested on brya support 4us long pulses. This change drops the GPIO PM override and re-enables dynamic GPIO PM. TEST=Boot brya to OS, ensure no TPM errors. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0c7b66b5514d8b80775ab7578ce7b12181af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56926 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-02mb/google/brya/variants/brask: Enable PCIE port 7 for EthernetDavid Wu
Enable PCIE port 7 using clk 6 for RTL8125 Ethernet BUG=b:193750191 BRANCH=None TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ic60a66dbd6ad87cf9c0de85ca7df4d854c371bf5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-01mb/goog/brya: Add probed fw_configs to SMBIOS OEM stringsWisley Chen
Enable this feature, and it can use the probe statement in devicetree to cache of fw_config field as oem string. BUG=b:191931762 TEST=With CBI FW_CONFIG field set to 0x8, set probe AUDIO MAX98390_ALC5682I_I2S_4SPK in devicetree dmidecode -t 11 OEM Strings AUDIO-MAX98390_ALC5682I_I2S_4SPK Change-Id: I93cd9ef2d1ad963e66c422cff17b083abf731046 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-01mb/google/brya/var/redrix: adjust uid for Maxim ampWisley Chen
DEV0 - 0x3a i2c-MX98390:00: Right Speaker DEV1 - 0x3b i2c-MX98390:01: Left Speaker DEV2 - 0x38 i2c-MX98390:02: Right Tweeter DEV2 - 0x39 i2c-MX98390:03: Left Tweeter This is to consist with other 2 speakers configs, and m/c driver design. uid0/1 = regular speakers. uid2/3 = tweeter BUG=191931762 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I0a3183b1e1ecbb109258d6e076551158e0b40ce1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-31mb/google/brya/var/gimble: Include SPD for K4UBE3D4AA-MGCRMark Hsieh
Add SPD support to gimble for LPDDR4 memory part K4UBE3D4AA-MGCR. BUG=b:191574298 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ida21fd50129412af59a341dea45232fd0f9931ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/57253 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-30mb/google/brya/var/felwinter: Update gpio tableEric Lai
Based on latest schematic to update the gpio table. BUG=b:197308586 BRANCH=None TEST=emerge-brya coreboot Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I0d91199ffd2128a136ea0a33dfe7affa77ae61d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-30mb/google/brya/var/felwinter: Update device treeEric Lai
Based on latest shcematic to update the device tree. BUG=b:197308586 BRANCH=None TEST=emerge-brya coreboot Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I59601571c5e4c2d19738cb333605fb22e1ea0d2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-30mb/google/brya: Enable TCSSDeepti Deshatty
Enable flag SOC_INTEL_COMMON_BLOCK_TCSS. BUG=b:187385592 TEST=type-C pendrive/Gen-2 SSD detected as Super speed. Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: Ie3cb8b8836b17fa00ab0089d03fca9f22c4d702e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54090 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-28mb/google/brya/variants/primus: update USB 2.0 controller Lane ParameterCasper Chang
Modify USB 2.0 port5 parameter to improve SI diagram measurement. BUG=b:187992881 TEST= Pass USB 2.0 SI Eye diagram measurement. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I1eff05a7ad6563898744c24f9657e28625319873 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-28mb/google/brya/var/anahera: Generate SPD ID for supported partsWisley Chen
Add supported memory parts in mem_parts_used.txt, and generate SPD id for these parts. MT53E1G32D2NP-046 WT:A H9HCNNNBKMMLXR-NEE K4U6E3S4AA-MGCR MT53E512M32D2NP-046 WT:E H9HCNNNCPMMLXR-NEE K4UBE3D4AA-MGCR H9HCNNNFAMMLXR-NEE MT53E2G32D4NQ-046 WT:A MT53E512M32D1NP-046 WT:B MT53E1G32D2NP-046 WT:B BUG=b:197850509 TEST=build pass Change-Id: Ib7bdab1396138d728ae053c30656a9c80dddaff8 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-28mb/google/brya: Add two sensors for DPTF functionalitySumeet Pawnikar
Add two thermal sensors for fan and wwan for DPTF based thermal control. BRANCH=None BUG=b:181271666 TEST=None Change-Id: Idc9bd6040c9bb316ec7e314f5e9c937c75cfc95a Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Boris Mittelberg <bmbm@google.com>
2021-08-28mb/google/brya: Create anahera variantWisley Chen
Create the anahera variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:197850509 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_ANAHERA Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Id7649d56a8d6f85d12208f7ddaf2f71a7fe98e8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-27mb/google/brya/variants/primus: Enable SaGv supportAriel Fang
This patch enables SaGv support for primus. BUG=b:196286180 Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: I00074e348dd6347602c18dcfd231a890153b4685 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-26mb/google/var/redrix: Correct the WWAN_PERST_L settingWisley Chen
WWAN_PERST_L (GPP_E0) is wrongly configured to NC in ramstage. So, remove it. BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: If8e96045a0d78a942f77d8d8e371ab75dff0c202 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-26mb/google/brya/variant/redrix: Correct MAX98390 AMP settingWisley Chen
4 MAX98390 Speaker Amps are connected to i2c0 and device addresses are 0x38/0x39/0x3a/0x3b BUG=b:191931762 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Ie8f01e6a7e09e18f6d34f3ceb1db8e2e238197bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/57114 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-25mb/google/brya/variants/gimble: Correct I2C slave address and update gpio.cMark Hsieh
1. According to the Maxim's comment and schematic diagram of proto, Modify I2C slave address to 0x38, 0x3c. 2. According to the schematic diagram of proto, Change GPD11 to NC. BUG=b:191811888, b:1191213263 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ibf8adf2ed8dda9ae6da06e7e995bef9395cdee35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57059 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-25mb/goog/bry/var/redrix: Enable Genesys GL9755 settingWisley Chen
BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I45ecab8c036a7e75cc0c564867119c027175ed06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-25mb/google/brya/primus: modify HID to MX98357A to enable audio functionCasper Chang
Primus has MX98360A, which Linux kernel 5.10 currently does not support and, therefore, audio does not work. As the device is compatible with the MX98357A, use that until Linux’ SoF driver supports the new version (https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3070268). BUG=b:194749863 BRANCH=none TEST=build coreboot and audio function works Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I893d9a31dc2c7726599c150be01b9585fb6c8a47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-25mb/google/brya: Fix PL4 limitsTim Wawrzynczak
Commit e7f3e6a0558 added PL4 limits for brya0, but the units were mW, whereas the `tdp_pl4` field is expected to be in whole Watts, therefore divide all of the settings by 1000. BUG=b:197468828 TEST=boot brya0 to OS Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6da6bae4eb8c83188d813828cdc4f7c1e20f1b5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-08-24mb/google/brya/variants/kano: Init devicetree for kanoDavid Wu
Init basic override devicetree based on schematics BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I283517427612e24eabe2ce736d677253065c7859 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-24mb/google/brya: Enable SaGv supportV Sowmya
This patch enabled the SaGv support for brya0 baseboard. BUG=b:187446498 Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I2a71e159fa49f677660af8279f2b582a3916eee2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-24mb/google/brya: Enable DRIVERS_GENESYSLOGIC_GL9755 for primusMalik_Hsu
Enable DRIVERS_GENESYSLOGIC_GL9755 support for primus. BUG=b:195611000 BRANCH=None TEST=build pass Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I0c60979a2d42f836e0f0261c42fcfc36c41e113a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-24mb/google/brya/var/felwinter: Generate RAM ID and SPD fileEric Lai
Add the support RAM parts for felwinter. Here is the ram part number list: DRAM Part Name ID to assign K4U6E3S4AA-MGCR 0 (0000) K4UBE3D4AA-MGCR 1 (0001) H9HCNNNBKMMLXR-NEE 0 (0000) MT53E1G32D2NP-046 WT:A 2 (0010) BUG=b:197308861 BRANCH=None TEST=emerge-brya coreboot Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I76febefc251b02a047819242e23c02dc50891c2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-22mb/google/brya/var/brya0: Align comments in overridetreePaul Menzel
Change-Id: Id3eb18cae2dd9a7b148bc9f3dcaf387f35dbd2fb Fixes: 312fb716 ("mb/google/brya: Add ALC1019_NAU88L25B support") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-08-20mb/google/brya: Add ALC1019_NAU88L25B supportEric Lai
Add ALC1019_NAU88L25B DB support. BUG=b:195891240 TEST=audio is functional when playing youtube. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9209c4cab00fc03b2a6107b5c32804786cd2e242 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-19soc/intel/alderlake: Move INTEL_CAR_NEM selection from SoC to mainboardSubrata Banik
This patch decouples the selection of eNEM feature enablement from SoC to ensure the ADLRVP does the validation first prior enabling this feature on OEM/ODM reference designs. BUG=b:168820083 TEST=No changing is being observed in .config with and without this CL. Change-Id: I709185159d9869501b1d8e8d00f6d25ec77838bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-19mb/google/brya: set tcc_offset value to 10Sumeet Pawnikar
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature. This value is suggested by Thermal team. BUGb=b:195706434 BRANCH=None TEST=Built for brya platform and verified the MSR value Change-Id: I22573e8ca935d99a16b0876768df169db4e61c4d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57000 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-19mb/google/brya/variants/primus: Fix GL9755S power sequenceMalik_Hsu
- Enable EN_PP3300_SD - Configure SD_PE_RST_L correctly BUG=b:195625340 TEST=Able to boot with SD card Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I33c17e88cabdc9b13634fc8f341aa6a09b7bfde5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-19mb/google/brya: Enable ADL_ENABLE_USB4_PCIE_RESOURCES for primusMalik_Hsu
primus supports USB4 and so needs to reserve bus numbers and prefmem and mem resources for potential hotplugs of devices. BUG=b:193377625 BRANCH=None TEST=build pass Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I1d1f8cc3460c1b89dade4f01690c77efcd799098 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-16mb/google/brya/var/redrix: Generate SPD ID for supported partsWisley Chen
Add supported memory parts in mem_parts_used.txt, and generate SPD id for these parts. MT53E512M32D1NP-046 WT:B MT53E1G32D2NP-046 WT:B BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I61377e6cdd3af9d6d80b9e1e68191b39f43358ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/56969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-16mb/google/brya: Add I2C parameterEric Lai
Add I2C parameters to make sure each bus speed is around 390kHz. BUG=b:188793264 TEST=Measure by scope. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib47228b8684c44f6acfec9e9e4b6e7b18ba6f6c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-16mb/google/brya/variants/kano: Configure GPIOs according to schematicsDavid Wu
Update initial gpio configuration for kano BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I4d6099fa8d17bebf798ddf236a68886087e2a95e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-16mb/google/brya: Configure EN_FCAM_PWR to highVarshit B Pandya
Recent change "7a8c68a: mb/google/brya: Configure H21 as GPO and A17 as low" turned EN_FCAM_PWR low since EN_FCAM_PWR is turned ON and OFF by IPU driver while MIPI UFC probing. However USB UFC also requires 3.3V which is enabled by A17. This caused USB UFC enumeration to fail BUG=b:196014678 Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I88c204ec07b1f7511f0d88074e336cfc9116a7d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56882 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-16mb/google/brya/primus: Fix G2 touchscreen reset GPIO polarityCasper Chang
modify reset_gpio as active low to meet touchscreen spec BUG=b:195490284 BRANCH=none TEST=build coreboot and touchscreen works Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I7ce1b3025db8abebf5693b34da846a7e969246fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/56923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-16mb/google/brya: allow MKBP devices and disable TBMC deviceBoris Mittelberg
Enable MKBP (Matrix Keyboard Protocol) interface for all Brya family to use for buttons and switches. Disable TBMC (Tablet Mode Switch device), as it is not needed anymore. BUG=b:170966461 TEST=manual test on Brya P1: Volume Up/Down buttons Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: Ic9c707f57871f388c363e01c9ab78a3b358ce728 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-15mb/google/brya: set PL4 value dynamically for thermalSumeet Pawnikar
Set PL4 value dynamically for brya board based on CPU SKUs which is detectable at runtime. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 with below messages, On brya (282): Overriding DPTF power limits PL1 (3000, 15000) PL2 (39000, 39000) PL4 (100000) On brya (482): Overriding DPTF power limits PL1 (4000, 28000) PL2 (43000, 43000) PL4 (105000) Change-Id: I20b98ccd8493ed238de647cda8ceb25f62029133 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-15mb/google/brya/{redrix,taeko}: Deduplicate lockdown configFelix Singer
Lockdown configuration is done in their baseboards. Thus, remove the setting from the variants overridetree. Change-Id: Iadb1201718466503987e4f6bd72bf711a2d3128e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-13mb/google/brya/variants/brya0: add PL4 values for different SKUsSumeet Pawnikar
Add PL4 values for brya0 board for different CPU SKUs. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 with below messages, On brya (282): Overriding DPTF power limits PL1 (3000, 15000) PL2 (39000, 39000) PL4 (100000) On brya (482): Overriding DPTF power limits PL1 (4000, 28000) PL2 (43000, 43000) PL4 (105000) Change-Id: I095e9eda6665fd1927f35ee57d52922eddd8227a Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-12mb/google/brya/variants/redrix: enable LTE PCIe portWisley Chen
Enable LTE PCIe port according to fw config. BUG=b:192052098 TEST=emerge-brya coreboot chromeos-bootimage Change-Id: Ic9472d2249c622858a75c63bc82e8e4e8166a3d7 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56894 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12mb/google/brya/variants/redrix: add mipi camera supportWisley Chen
Add mipi camera support by selecting the Kconfig symbols and adding it to the devicetree with ACPI UID 0x50000 and name IPU0. BUG=b:192052098 TEST=checked mipi camera works Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I69281f36ddbc1abf9905c8db9287500f9aa995c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56893 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12mb/google/brya/variants/gimble: Update GPIO for PP1800 DMIC enableMark Hsieh
add GPP_D16 in gimle gpio.c and set value to 1 for PP1800 DMIC init sequence BUG=b:195968649 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ia0639162e2c3f02f622470fa16c21fe8a067cf7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56889 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-11mb/google/brya/variant/taeko: Update devicetree settingsJoey Peng
Based on schematic and gpio table of taeko, generate overridetree.cb settings for taeko. BUG=b:195494281 TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I96aaf48284a226edc39115f870bf0f3dd83ab8b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-10mb/google/brya/variants/primus: Remove DPTF fan controlScott Chao
BUG=b:195901486, b:195387997 BRANCH=none TEST=Check fan is able to control by EC Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: If758d75ff24c88c9eaf0de90ac0ef08d172a2edd Reviewed-on: https://review.coreboot.org/c/coreboot/+/56879 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-24 14:35:47 +0000