summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya/variants
AgeCommit message (Expand)Author
2022-05-20mb/google/brya: Disable PCH USB2 phy power gating for primusCasper Chang
2022-05-20mb/google/brya/variants/crota: Configure audio codec IRQ typeTerry Chen
2022-05-19mb/google/brya/var/kinox: Remove stop pin declaration for LANDtrain Hsu
2022-05-19mb/google/nissa: Rework LTE GPIO configurationReka Norman
2022-05-18mb/google/brya/var/crota: Add reset and enable delay time for rtd3-coldTerry Chen
2022-05-18mb/google/nissa: Change EC wake interrupt to IRQEric Lai
2022-05-17mb/google/brya/var/mithrax: update overridetree and KconfigJohn Su
2022-05-17mb/google/brya/var/mithrax: Generate RAM ID and SPD fileJohn Su
2022-05-17mb/google/brya/var/mithrax: update gpio settingsJohn Su
2022-05-17mb/google/brya/var/kinox: Set memory SMBus addresses to 0x52, 0x50Dtrain Hsu
2022-05-16mb/google/brask/variants/moli: remove DB_OPT from overridetreeRaihow Shi
2022-05-16mb/google/brask/variants/moli: return the default VBTRaihow Shi
2022-05-16mb/google/nissa/var/nivviks: Disable PCIe WLAN pinsReka Norman
2022-05-16mb/google/nissa/var/nivviks: Add support for NVMe and UFSReka Norman
2022-05-16mb/google/nissa/var/nivviks: Update GPIOs to support nirwenReka Norman
2022-05-16mb/google/nissa/var/nivviks: Disable pen garage based on fw_configReka Norman
2022-05-16mb/google/nissa/var/nivviks: Disable MIPI WFC based on fw_configReka Norman
2022-05-16mb/google/brya: Remove Rcomp resistors override for NissaUsha P
2022-05-16mb/google/crota: Change ELAN touchscreen i2c address and HIDTerry Chen
2022-05-16mb/google/nissa/var/nivviks: Disable SD card based on fw_configReka Norman
2022-05-16mb/google/nissa/var/nivviks: Use interrupt with lock for pen detect GPIOEric Lai
2022-05-13mb/google/brya/variants/osiris: Init devicetree for osirisDavid Wu
2022-05-13mb/google/brya/variants/osiris: Configure GPIOs according to schematicsDavid Wu
2022-05-12mb/google/brask/variants/moli: Set GPP_E14 as the default value.Raihow Shi
2022-05-12mb/google/nissa/var/craask: Add supported touchpadTyler Wang
2022-05-12mb/google/brya/var/agah: Enable PCIe RP 3 for LANTony Huang
2022-05-11mb/google/brya/var/crota: enable wifi sarScott Chao
2022-05-11mb/google/brya/var/kinox: Disable thunderbolt interfaceDtrain Hsu
2022-05-11mb/google/brask/variants/moli: correct tcss_usb3 portCasper Chang
2022-05-06mb/google/brask/variants/moli: enable BT offloadCasper Chang
2022-05-06mb/google/brya/var/crota: Fix codec reset pin in overridetreeTerry Chen
2022-05-06mb/google/brask/variants/moli: disable ASPM on pcie_rp 6Raihow Shi
2022-05-06mb/google/brya/variants/crota: Enable Bluetooth offload supportTerry Chen
2022-05-05mb/google/brya/var/vell: Remove unused i2c7 settingsGaggery Tsai
2022-05-05mb/google/brya/var/agah: Add GPU power sequencingTim Wawrzynczak
2022-05-05mb/google/brya/var/crota: setting for codec reset pinTerry Chen
2022-05-04mb/google/brya/var/taeko{4es}: Remove extraneous __weak attributesTim Wawrzynczak
2022-05-04mb/google/brya/var/crota: Enable webcam powerTerry Chen
2022-05-04mb/google/brya: Add EC mux device to brya0Prashant Malani
2022-05-02mb/google/brya/var/kinox: Update power control settings for 15W SOCDtrain Hsu
2022-05-02mb/google/brya/var/osiris: Enable EC keyboard backlightDavid Wu
2022-04-29mb/google/brya/var/agah: Change Aux settings to TCSS port 2Tony Huang
2022-04-28mb/google/brya/var/crota: fix Goodix touchpadTerry Chen
2022-04-27mb/google/brya/var/banshee: Update the FIVR configurationsFrank Wu
2022-04-27mb/google/brya/var/vell: Enable TBT PCIe root port 3Gaggery Tsai
2022-04-27mb/google/nissa/var/craask Add device settingsTyler Wang
2022-04-27mb/google/brya/var/craask: Add GPIO tableTyler Wang
2022-04-27mb/google/brya/var/craask: Generate SPD ID for supported memory partTyler Wang
2022-04-27soc/intel/adl/chip.h: Rename max_dram_speed to include unitsScott Chao
2022-04-27mb/google/brya/var/crota: update gpio configurationScott Chao
2022-04-27mb/google/brya/var/crota: enable boot from SSD/ eMMCScott Chao
2022-04-27mb/google/brya/var/crota: Limit dram speed to 4800 MT/sScott Chao
2022-04-27mb/google/brya/var/crota: modify DQ/ DQS tableScott Chao
2022-04-27mb/google/brya/var/vell: Fix camera LED flicker problemShon Wang
2022-04-24mb/google/brya: Create mithrax variantJohn Su
2022-04-22mb/google/brya/var/taniks: Configure Acoustic noise mitigationleo.chou
2022-04-22mb/google/brya/var/taniks: Add WiFi SAR table for taniksleo.chou
2022-04-21mb/google/brask/variants/moli: update overridetreeRaihow Shi
2022-04-21mb/google/brya/var/taeko: Add WIFI SAR support for tarloJoey Peng
2022-04-21mb/google/brya/var/osiris: Generate SPD ID for supported partsDavid Wu
2022-04-21mb/google/brya: Create osiris variantDavid Wu
2022-04-20mb/google/brya/var/vell: increase RFI Spread Spectrum to 6%Robert Chen
2022-04-20mb/google/brya/var/brya0: configure gpio for headsetAmanda Huang
2022-04-20mb/google/brya/var/brya0: Swap TPM and touchscreen I2C busAmanda Huang
2022-04-20mb/google/brya/var/redrix: Add alias back to RP6 WWAN deviceTim Wawrzynczak
2022-04-20mb/google/brya/var/anahera{4es}: Enable power saving for Smart CardWisley Chen
2022-04-19mb/google/brya: Disable PCH USB2 phy power gating for felwinterSridhar Siricilla
2022-04-19mb/google/brask/variants/moli: update type-c setting in overridetreeRaihow Shi
2022-04-19mb/google/brask/variants/moli: add delay time to rtd3-coldRaihow Shi
2022-04-19mb/google/brask/variants/moli: remove i2c1 in overridetreeRaihow Shi
2022-04-19mb/google/brask: fix boot beepDtrain Hsu
2022-04-19mb/google/brask/variants/moli: Pick VBT based on FW_CONFIGRaihow Shi
2022-04-19mb/google/nissa: Add gpio lock pinsEric Lai
2022-04-14mb/google/brya/var/kano: Configure Acoustic noise mitigationDavid Wu
2022-04-14mb/google/brya: Add variant_init and variant_finalize callbacksTim Wawrzynczak
2022-04-13mb/google/brya/baseboard/nissa: Configure I2C lcnt and hcntReka Norman
2022-04-13mb/google/brya: Create craask variantTyler Wang
2022-04-13mb/google/brya: Add missing parameter name to variant_generate_s0ix_hookReka Norman
2022-04-13mb/google/brya/var/nereid: Enable OZ711LV2LN SD card controllerReka Norman
2022-04-13mb/google/brya/var/brya0: Change MAX98360 AMP interface to I2S1Amanda Huang
2022-04-12mb/google/brya/var/vell: add WWAN power sequence setting for vellRobert Chen
2022-04-07ChromeOS: Add DECLARE_x_CROS_GPIOS()Kyösti Mälkki
2022-04-07mb/google/brya/var/nereid: Add WLAN power sequenceReka Norman
2022-04-07mb/google/brya/var/nereid: Enable pen garageReka Norman
2022-04-07mb/google/brya/var/nereid: Configure descriptor for either Type-C or HDMIReka Norman
2022-04-06ChromeOS: Promote variant_cros_gpio()Kyösti Mälkki
2022-04-04mb/google/brya/var/vell: Tune I2C1/I2C7 bus speed for 1 MHzEddy Lu
2022-04-01mb/google/brya/var/nereid: Add separate VBT for HDMIReka Norman
2022-04-01mb/google/brya/var/nereid: Disable C1 PMC mux conn for HDMIReka Norman
2022-04-01mb/google/brya/variants/baseboard/brask: Turn off NFC power in S0ixAlan Huang
2022-04-01mb/google/brya/var/primus{4es}: Decrease touchscreen T3 timing to 200msCasper Chang
2022-04-01mb/google/brya/var/nereid: Enable AUX DC biasing on C0 and C1Reka Norman
2022-03-31mb/google/brya/var/agah: Replace amp max98390 with max98360Tony Huang
2022-03-31mb/google/brya/var/kinox: set GPP_D0 to NCDtrain Hsu
2022-03-30mb/google/brya/var/kano: Remove SAR sensorDavid Wu
2022-03-30mb/google/brya/variants/crota: Add memory config for crotaTerry Chen
2022-03-30Revert "mb/google/brya/var/kano: adjust I2C3 speed"David Wu
2022-03-30mb/google/brya/variants/crota: init overridetree for crotaTerry Chen
2022-03-30mb/google/brya/var/banshee: Update the GPP_D12 as USB_C3_LSX_RXFrank Wu
2022-03-30mb/google/brya/var/taeko: Add new FW_CONFIG option for THERMAL for tarloJoey Peng
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 07:45:45 +0000