summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2024-07-12soc/intel/cmn/cse: Correct CMOS error message for CSE partition firmwareSubrata Banik
The CMOS entry for CSE partition firmware was incorrectly labeled as `ramtop` and `partition firmware` in the error messages. This patch corrects the messages to accurately refer to `CSE partition firmware`. Additionally, the alignment and size check comments are updated to reflect this change. Change-Id: Ib3a7fb88f52c4d0c47d828bcd1c4649e62d19654 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-07-11soc/intel/cmn/cse: Refine boot partition loggingSubrata Banik
This patch ensures CSE boot partition (RO/RW) version information only log when the status is "success". If the status is not successful, log an error message indicating the failure and status code. This change avoids logging potentially incorrect version information when the boot partition is not valid. BUG=b:305898363 TEST=Builds successfully for google/rex variants. Change-Id: I1932302b145326a1131d64b04af1cbfd6d050b7b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-07-11soc/intel/meteorlake: Conditional selection of CSE Lite PSRSubrata Banik
This patch makes the selection of `SOC_INTEL_CSE_LITE_PSR` conditional on both `MAINBOARD_HAS_CHROMEOS` and `SOC_INTEL_CSE_LITE_SKU` being enabled. This ensures that CSE Lite PSR is only active when both ChromeOS is the target platform and CSE sync is performed inside coreboot. BUG=b:305898363 TEST=Able to build google/rex. Change-Id: I7199c034bbe6e7f077650417da67fa544f0b49d5 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83396 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-11soc/intel: Extend CSE RW Update and ME read access for payload syncSubrata Banik
Modify the dependencies for `SOC_INTEL_CSE_RW_UPDATE` and `ME_REGION_ALLOW_CPU_READ_ACCESS` config options to include `SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD`. This allows these features to be enabled even when CSE sync is performed in the payload, not just within coreboot (when `SOC_INTEL_CSE_LITE_SKU` config is enabled). BUG=b:305898363 TEST=Builds and boots successfully: * google/rex0 with SOC_INTEL_CSE_LITE_SKU * google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD Change-Id: Id6ec19d74237f278e8383c89923523871b2cc2db Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-07-11soc/intel/meteorlake: Conditionally update CSE sync UPDs in FSP-MSubrata Banik
This patch updates FSP-M UPDs conditionally to ensure CSE firmware updates and VGA initialization control only when `SOC_INTEL_CSE_LITE_SKU` config is enabled. This ensures eSOL rendering is tied to CSE sync performed in coreboot, preventing unnecessary setup when sync is deferred to the payload. Deferring CSE sync to the payload results in the depthcharge screen. BUG=b:305898363 TEST=Builds and boots successfully: * google/rex0 with SOC_INTEL_CSE_LITE_SKU * google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD Change-Id: Iffdd4b1be4abba8c57e28542058a575cc6de674c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-07-11soc/intel/cmn/cse: Refactor CBMEM ID handling for flexibilitySubrata Banik
This patch refactors the handling of CSE CBMEM IDs to enable platforms to choose whether to perform CSE sync operations within coreboot or defer it to the payload. This separation improves code organization, ensuring `cse_lite.c` focuses on coreboot-specific CSE Lite tasks. Now, platforms can select: * `SOC_INTEL_CSE_LITE_SKU` for CSE sync within coreboot * `SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD` for deferred payload sync This change ensures mutually exclusive options, avoiding unnecessary SPI flash size increases. BUG=b:305898363 TEST=Builds and boots successfully: * google/rex0 with SOC_INTEL_CSE_LITE_SKU * google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD Change-Id: I74f70959715f9fd6d4d298faf310592874cc35d4 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83393 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-11soc/amd/phoenix: Fix APOB NV size/base for non-vboot buildsMatt DeVillier
The APOB NV size/base are embedded into the amdfw binary and read by the PSP. These need to be synchronized with the FMAP region used by coreboot to store the APOB data. soc_update_apob_cache() will only use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the NV base passed to the PSP needs to reflect that as well. This fixes the issue of RAM training running on every boot on non-vboot builds for Myst boards. TEST=untested, but same change as made for Mendocino Change-Id: Ib4a78a39badf0a067e22eebe5869e5ea51723f35 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2024-07-11soc/amd/mendocino: Fix APOB NV size/base for non-vboot buildsMatt DeVillier
The APOB NV size/base are embedded into the amdfw binary and read by the PSP. These need to be synchronized with the FMAP region used by coreboot to store the APOB data. soc_update_apob_cache() will only use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the NV base passed to the PSP needs to reflect that as well. This fixes the issue of RAM training running on every boot on non-vboot builds for Skyrim boards. TEST=build/boot Skyrim (Frostflow), verify RAM training only run on first boot after flashing. Change-Id: I9be1699d675331b46ee9c42570700c2b72588025 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83400 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2024-07-10cbmem_top: Change the return value to uintptr_tElyes Haouas
Change-Id: Ib757c0548f6f643747ba8d70228b3d6dfa5182cd Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82752 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Jakub Czapiga <czapiga@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-04soc/amd/common/acpi/ivrs: use PCI_DEVFN macroFelix Held
Use the PCI_DEVFN macro to make the calculation of the ivhd->device_id value a bit clearer. TEST=Timeless build results in identical binary for Mandolin Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7b7949ad3524790e7d7d527c488a32e785f55bc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/83343 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-03soc/intel/xeon_sp/gnr: Add soc_pci_domain_fill_ssdtShuo Liu
Domain device objects are created with HID/CID/UID/_OSC/_PXM Dynamic domain SSDT generation could benefit the support of SoCs with multiple SKUs, or the case where one set of codes supports multiple SoCs. One possible side-effect might be the extra performance cost for generating these tables, which should not bring big impact on high performance server CPUs. GNR codes run with dynamic domain SSDT generation to fit for both GraniteRapids and SierraForest SoCs. TEST=Build on intel/avenuecity CRB TEST=Build on intel/beechnutcity CRB Change-Id: I28bfdf74d8044235f79f67d832860d8b4306670c Signed-off-by: Shuo Liu <shuo.liu@intel.com> Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-07-03soc/intel/xeon_sp/gnr: Support fast bootGang Chen
Fast boot will used pre-saved hardware configuration data to accelerate the boot process, e.g. DDR training is skipped by using pre-saved training data. Enable fast boot on cold and warm resets by default. Change-Id: Ib5dc76176b16ea1be5dd9b05a375c9179411f590 Signed-off-by: Gang Chen <gang.c.chen@intel.com> Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-07-03soc/intel/common: Skip ME version log for Lite SKUSubrata Banik
This change skips the ME firmware version logging in print_me_fw_version() if the ME firmware SKU is detected as Lite SKU. The reasoning is that the RO (BP1) and RW (BP2) versions are already logged by the cse_print_boot_partition_info() function for Lite SKUs, making the additional log redundant. The check for the Lite SKU has been moved to print_me_fw_version(), where the decision to print the version is made, instead of in get_me_fw_version(), where the version information is retrieved. TEST=Able to build and boot google/rex. w/o this patch: [DEBUG] ME: Version: Unavailable w/ this patch: Unable to see such debug msg. Change-Id: Ic3843109326153d5060c2c4c25936aaa6b4cddda Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-07-03soc/intel/cmn/cse: Make ME firmware version query function staticSubrata Banik
This change modifies the get_me_fw_version() function to be statically scoped within src/soc/intel/common/block/cse/cse.c, as it is only used by the print_me_fw_version() function in the same file. The function declaration is also removed from intelblocks/cse.h. The order of the function definitions in cse.c was also changed to be more logical, with the now static helper function get_me_fw_version() defined first, before it is used. TEST=Able to build google/rex. Change-Id: Idd3a6431cfa824227361c7ed4f0d5300f1d04846 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83257 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-03soc/intel/cmn/cse: Conditionally disable ME status reportingSubrata Banik
This patch disables the ME status reporting functionality (dump_me_status, print_me_fw_version) in the CSE driver when SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD is defined. This is likely intended for platforms or configurations where the CSE communication is only limited to payload. BUG=b:305898363 TEST=Able to build google/rex. Change-Id: I5e360408a7847968117df475ff244d79ceafa23f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83233 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-07-03soc/intel/cmn/cse: Skip CSE version call if sync is done by payloadSubrata Banik
This patch skips the CSE firmware version print when CSE sync is done by payload. The payload is responsible to dump the CSE version. BUG=b:305898363 TEST=Able to build google/rex. Change-Id: I1a9e5583c79ebd81291a4b3ae24529b4582502cb Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-07-03soc/intel/cmn/cse: Modify dependency on CSE EOP configsSubrata Banik
Refactor CSE lite End-of-Post (EOP) configs to support the alternative of sending CSE communication from the payload. When the SOC_INTEL_CSE_SEND_EOP_BY_PAYLOAD config is selected, coreboot will skip initiating CSE EOP operations and rely on the payload CSE driver implementation. The following configs are modified to ensure coreboot skips CSE communication when SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD is enabled: - SOC_INTEL_CSE_SEND_EOP_EARLY - SOC_INTEL_CSE_SEND_EOP_LATE - SOC_INTEL_CSE_SEND_EOP_ASYNC - SOC_INTEL_CSE_SEND_EOP_BY_PAYLOAD BUG=b:305898363 TEST=Able to build google/rex. Change-Id: Ia6b616163d02be8d637b134fd3728c391fc63c90 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83229 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-03soc/intel/cmn/cse: Modify dependency on CSE lite configsSubrata Banik
Refactor CSE lite configs (specifically CSE sync related) to support the alternative of sending CSE communication from the payload. When the SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD config is selected, coreboot will skip initiating CSE sync operations and rely on the payload CSE driver implementation. The following configs are modified to ensure coreboot skips CSE communication when SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD is enabled: - SOC_INTEL_CSE_LITE_PSR - SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY - SOC_INTEL_CSE_LITE_SYNC_IN_ROMSTAGE - SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE BUG=b:305898363 TEST=Able to build google/rex. Change-Id: I5ddaf6e29949231db84b14bf7ea2d34866bb8e6c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83228 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-07-03tree: Use <console/console.h> only when usedElyes Haouas
Change-Id: I3cb1f11beba61afdf2be6188bde9ff135f8ace50 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-07-023rdparty/fsp: Update submodule to upstream masterFelix Singer
The filename of the Elkhart Lake FSP binary changed in the FSP repository. It's unlikely that it will be renamed to the original name soon. Thus, update the filename in the coreboot repository. Updating from commit id cc6399e: 2024-03-04 15:40:41 +0800 - (IoT MTL-UH & MTL-PS PV (3471_49) FSP) to commit id 800c857: 2024-06-25 15:47:28 +0800 - (Update Fsp.fd) This brings in 23 new commits: 800c857 Update Fsp.fd 41e4590 NEX AZB IPU24.4 (5254_00) FSP 0efd8a3 IoT RPL-PS PV (5045_47) FSP 196e3fe Update README.md 380afd8 Update README.md 5dc88ca NEX ADL-PS IPU24.3/MR6 (5045_02) FSP 22762e9 Merge branch 'master' of https://github.com/intel/FSP 8134dbd Elkhart Lake IPU2024.3 FSP 3819544 add required SECURITY.md file for OSSF Scorecard compliance a6ee963 Delete AlderLakeFspBinPkg.dec 9d819ea Deprecate Client/AlderLakeFspBinPkg f963690 Raptor Lake FSP C.1.C8.50 f67f9ef Raptor Lake FSP C.0.C8.50 68c3cfa NEX ADL-PS IPU 2024.3 (5045_02) FSP f0d04d9 NEX ADL-P IPU 2024.3 (5045_02) FSP 6fa139c NEX ADL-S IPU 2024.3 (5045_02) FSP c4af5ac NEX TGL IPU 2024.3 (7092_01) FSP 8cf0372 IoT ADL-N MR4 (5061_00) e5ceb0b Merge branch 'master' of https://github.com/intel/FSP aada6a5 Elkhart Lake IPU2024.2 FSP 90d1d3b Update README.md 1a5a3ee Testing 61c069a NEX RPL-S MR3 (4445_03) FSP Change-Id: I47013bce65054f2c496c9aa7c16e55b51d65e5fe Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83294 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-01soc/nvidia: Remove unneeded white spacesElyes Haouas
Change-Id: Ifd19cdcfbdf0b01984e0db0aa880fdcb256663b4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-28device/azalia_device.c: Always read-write GCAPAngel Pons
In the HD Audio Specification Rev. 1.0a, every bitfield in the GCAP register is RO (Read Only). However, it is known that in some Intel PCHs (e.g 6-series and 7-series, documents 324645 and 326776), some of the bitfields in the GCAP register are R/WO (Read / Write Once). GCAP is RO on 5-series PCHs; 8-series and 9-series PCHs have a lock bit for GCAP elsewhere. Lock GCAP by reading GCAP and writing back the same value. This has no effect on platforms that implement GCAP as a RO register or lock GCAP through a different mechanism. Change-Id: Id61e6976a455273e8c681dbeb4bad35d57b1a8a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-28soc/intel/xeon_sp: Reserve MMIO for Gen1 SoCShuo Liu
For Gen1 SoCs, the range starting from the end of VTd BAR to the end of 32-bit domain MMIO resource window is reserved for unknown devices. Get them reserved. TEST=Build and boot on intel/archercity CRB Change-Id: Ie133fe3173ce9696769c7247bd2524c7b21b1cf8 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-28soc/intel/xeon_sp: Reserve MMIO range for VTd BAR dynamicallyShuo Liu
vtd_probe_bar_size is used to decide the BAR size. TEST=Build and boot on intel/archercity CRB Change-Id: Ie45dd29e386cbfcb136ce2152aba2ec67757ee3c Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82431 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-26acpi: Rename acpi_create_dmar_drhdShuo Liu
For most of SoCs, DRHD is by default with the size of 4KB. However, larger sizes are allowed as well. Rename acpi_create_dmar_drhd to acpi_create_dmar_drhd_4k to support the default case while a later patch will re-add acpi_create_dmar_drhd with a size parameter. TEST=intel/archercity CRB Change-Id: Ic0a0618aa8e46d3fec2ceac7a91742122993df91 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-25soc/intel/common: Extend WAIT_FOR_DP_MODE_ENTRY_TIMEOUT_MS to 1500msTony Huang
Some dongles require more time to be ready, this CL extedns the DP mode entry timeout from 0.5s to 1.5s and make sure the tested dongle display works. Before: [WARN ] DP not ready after 500ms. Abort. After: [INFO ] DP ready after 1211 ms BUG=b:348309582 TEST=emerge coreboot verify tested dongles and monitors display works Change-Id: I22d7800b50f6f7de9f147ae6998a5015d0dc0be9 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83206 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2024-06-23skl mainboards: Move cpu_cluster device to chipset devicetreeFelix Singer
Change-Id: I7114612e686a0bf3cfc241f45fa62077fad16f5a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-06-21soc/intel/cmn/block/cse: Create CBMEM entries for payload to fill with CSE infoKapil Porwal
Currently, the payload cannot create new CBMEM entries as there is no such infrastructure available. The Intel CSE driver in the payload needs below CBMEM entries - 1. CBMEM_ID_CSE_INFO to - a. Avoid reading ISH firmware version on consecutive boots. b. Track state of PSR data during CSE downgrade operation. 2. CBMEM_ID_CSE_BP_INFO to avoid reading CSE boot partition information on consecutive boots. The idea here is to create required CBMEM entries in coreboot so that later they can be consumed by the payload. BUG=b:305898363 TEST=Store CSE version info in CBMEM area in depthcharge on Screebo Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I9561884f7b9f24d9533d2c433b4f6d062c9b1585 Reviewed-on: https://review.coreboot.org/c/coreboot/+/83103 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-21soc/intel/cmn/acpi: Add support for `PCR_BASE_ADDRESS` above 4 GiBSubrata Banik
This change updates the Northbridge ASL to conditionally include a QWordMemory resource for `SM01` when the `CONFIG_PCR_BASE_ADDRESS` is above 4 GiB. If `CONFIG_PCR_BASE_ADDRESS` is below 4 GiB, or falls within the PCH reserved range, the existing handling of `SM01` remains unchanged (as a DWordMemory resource). TEST=Built with CONFIG_PCR_BASE_ADDRESS both above and below 4 GiB, verified ASL output. Change-Id: I9547377cdea6cb4334ab59b3bc837059fbb22e3b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83112 Reviewed-by: Cliff Huang <cliff.huang@intel.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-21soc/mediatek/mt8188: Respect ARM64_BL31_OPTEE_WITH_SMC optionYu-Ping Wu
Since BL31_MAKEARGS is already handled in arm64/Makefile.mk, remove the duplication from mt8188/Makefile.mk. In addition, reserve the memory range for running OP-TEE only if ARM64_BL31_OPTEE_WITH_SMC is enabled. BUG=b:347851571 TEST=emerge-geralt coreboot BRANCH=geralt Change-Id: I88a9a07a685a6c9fe9739b6101ccb8a5ce23fd8b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-06-18soc/amd/cezanne: Add AMD Renoir SOC supportAnand Vaikar
Add AMD SOC Family 17h Renoir CPUIDs per PPR doc #55922 Renoir is similar to Cezanne with only differences in CCX count. Cezanne has one Zen3 CCX with 8 cores per CCX compared to the two Zen2 CCX with 4 cores per CCX. Hence, coreboot side Cezanne SOC code should be mostly compatible with Renoir and can be leveraged. Change-Id: I6b43eb782527351c79b835d094a5b61103cd6642 Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83099 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-16soc/intel/alderlake: Use the RPL-P IoT FSP if desiredBenjamin Doron
This change also drops a duplicated config default line, which might be why this was omitted. Change-Id: I2b4c8b316adaadec3e49d5162b37b37629331b06 Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83086 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-14soc/intel/common/block: Move VTd basic definitions into header fileJincheng Li
TEST=Build and boot on intel/archercity CRB Change-Id: I4f9e606cf9ec01ec157ef4dd7c26f6b5eb88c7b7 Signed-off-by: Jincheng Li <jincheng.li@intel.com> Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-13soc/intel/adl: Skip RW CBFS ucode update if RO is lockedSubrata Banik
This patch eliminates coreboot from loading microcode from RW CBFS (when the RO descriptor is locked, which indicates a fixed RO image) because the kernel can already patch the microcode on BSPs and APs while booting to OS. This may be a chance to lower the burden on the AP FW side because patching microcode on in-field devices is subject to firmware updates, which are rarely published and, if required, must go through the firmware qualification testing procedure (which is costly, unlike kernel updates for ucode updates). 1. The FIT loads the necessary microcode from the RO during reset. 2. Reloading microcode from RW CBFS impacts boot time (~60ms, core-dependent). 3. The kernel can still load microcode updates. ChromeOS devices leverage RO+RW-A/RW-B booting. The RO's microcode is sufficient for initial boot, and the kernel can apply updates later. BUG=none TEST=Verified boot optimization; in-field devices skip RW-CBFS microcode loading when RO is locked. Change-Id: I68953d45d3624aba0a3be28bc7b266b7621ddcc4 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82999 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-13soc/intel/apollolake: Add SoC-specific microcode update check for GLKMatt DeVillier
While both APL and GLK load the CPU microcode from FIT, only GLK supports the PRMRR/SGX feature. When this feature is supported, the FIT microcode load will set the msr (0x08b) with the patch id/revision one less than the revision in the microcode binary. This results in coreboot attempting (and failing) to reload the microcode again in ramstage. Avoid the microcode reload attempt for GLK by using a SoC- specific microcode update check which accounts for the off-by-1 when comparing versions. Implementation is based on the one used for SKL and CNL, but modified based on feedback in comments on Gerrit. TEST=build/boot google/reef (electro) and google/octopus (ampton), verify in cbmem console log that CPU microcode update in ramstage is skipped due to already being up to date, and that GLK uses the SoC-specific check and APL uses the non-specific/general one. Change-Id: Iab97f23d4388d5057797bb13f585db821c735bd0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83037 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-12soc/sifive/fu540/chip.c: Add RAM resourcesMaximilian Brune
Add RAM region so that the payload can be placed in there without coreboot complaining that the payload doesn't target a RAM region. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: Id07eae3560ce69cd8a6a695702fa0b4463c50855 Reviewed-on: https://review.coreboot.org/c/coreboot/+/81909 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-06-12soc/sifive/fu540/memlayout.ld: Enlarge OpenSBI regionMaximilian Brune
OpenSBI got bigger and doesn't fit anymore in 128K which causes coreboot to not compiler anymore because the region overlaps with ramstage This patch simply increases the size and uses the OpenSBI linker macro instead. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: If1ccaafbf91dae986c470020faf9c0b4fba448e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/83046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-06-11soc/amd/genoa_poc: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I0e5fba7db7d97835001934cb140f4c76bdc46d3e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-06-08soc/alderlake/romstage: Set UsbTcPortEnPreMem UPD based on devicetreeMichał Żygowski
The UsbTcPortEn UPD for FSP-S is being set in ramstage, however the equivalent FSP-M UPD, the UsbTcPortEnPreMem, was not being set. Following the Meteor Lake example, set the UsbTcPortEnPreMem UPD as well for Alder Lake. Setting this FSP-M UPD will cause FSP to properly program sideband use BSSB_LSx pins for the enabled Type-C ports. Required for proper DCI debug and TCSS initialization flow. Change-Id: If3b79167ec1769ddfb7d28a6c78a3e80bd10afe7 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80500 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-07soc/intel/cmn/cse: Support CSE sync from payloadKapil Porwal
Skip CSE sync in coreboot when payload is doing it. BUG=b:305898363 TEST=Verify CSE sync from depthcharge on Screebo Change-Id: Ifa942576c803b8ec9e1e59c61917a14154fb94b2 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-06-07soc/mediatek/mt8173/i2c.c: Remove unused macroElyes Haouas
Change-Id: I90fbd7ce0e1c6cd15d73cb73dc774df2de56b346 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-06-07soc/intel/common/uart: Drop chip in favor of devicetree opsArthur Heymans
It is now possible to hook up device ops directly to devices in devicetree which removes the need for a fake chip. This also fixes Hermes booting as the PCI ops were incorrectly hooked up to a dummy device. The intel uart driver was requesting a resource from the generic device and died since it does not exist: [EMERG] GENERIC: 0.0 missing resource: 10 This was broken in commit b9165199c32a (mb/prodrive/hermes: Rework UART devicetree entry). Change-Id: I3b32d1cc52afaed2a321eea5815f2957fe730f79 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82940 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-07soc/intel/alderlake: select Kconfig MRC_CACHE_USING_MRC_VERSIONRonak Kanabar
This patch introduces support for storing the MRC cache based on the MRC version for both ADL-N and TWL platforms. It select the MRC_CACHE_USING_MRC_VERSION option when client SOC_INTEL_ALDERLAKE_PCH_N is chosen. BUG=b:296433836 Change-Id: Icc7e4ecd84a7d2818d54acc6ac5d0592544bb9ce Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81038 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brandon Weeks <bweeks@google.com>
2024-06-07intel/alderlake/Kconfig: Use vendorcode headers for Client ADL-N FSPRonak Kanabar
This patch is to switch Client ADL-N FSP headers to vendorcode from IOT headers. Also guard IOT headers & bin path with FSP_TYPE_IOT Kconfig. BUG=b:296433836 TEST=Able to build and boot google/nivviks Change-Id: I1ffcc3f284c213ff0533de3a0e228aacf523b380 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07soc/intel/alderlake: Guard PchPcieClockGating & PchPciePowerGating UPDsRonak Kanabar
PchPcieClockGating & PchPciePowerGating UPDs are not available for ADL_N FSP headers. Add guard to Avoid PchPcieClockGating & PchPciePowerGating programming for ADL_N FSP. Change-Id: I2f1625038896b07c354498fe431cad97fb9b5bdb Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82917 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-06-05cpu/x86: Make 1GB paging the defaultJulius Werner
This patch flips the polarity of CONFIG_USE_1G_PAGES_TLB into CONFIG_NEED_SMALL_2MB_PAGE_TABLES which is off by default, meaning CPUs added in the future will automatically build the smaller 1GB pages. We can expect support for this feature to be available on all future CPU generations (with the possible exception of embedded edge cases), so this default setting should make mistakes less likely and keep maintenance effort lower. (Besides, enabling the support where it doesn't work fails fast, whereas keeping it disabled where it could work is an inefficiency that can easily go overlooked for a long time.) While this is technically a CPU feature, not a northbridge feature, we support a lot more individual CPUs than northbridges in the pre-SoC era, and they tend to be closely coupled anyway. So select the option at the northbridge level for older CPUs to keep things simpler. Change-Id: I2cf1237a7fb63b8904c2a3d57fead162c66bacde Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-05soc/intel/xeon_sp: Remove duplicated Kconfig POSTCAR_STAGEJincheng Li
POSTCAR_STAGE is already selected in XEON_SP_COMMON_BASE Change-Id: I3f94e6cc76c8f376119ffa8ec43fa1a43fb40977 Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82795 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-06-04soc/intel/xeon_sp: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I950b8859b51fb61edc0cf1115f6665378bc0b836 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82887 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-04soc/mediatek/common: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I50e874790dedcb6bf3b3ac8368821f22611aa3b7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82894 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-03tree: Use calloc(n, sizeof(struct)) insteadof calloc(sizeof(struct), n)Elyes Haouas
Change-Id: I5e67e370d4eb8fe28227843bbca34db06ad84b26 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82786 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-03soc/intel/meteorlake: Enable USB2 port reset message on Type-C portsJeremy Soller
Apply commit c6b65c1a811e ("soc/intel/alderlake: Enable USB2 port reset message on Type-C ports") to Meteor Lake. This change is added to address the issue of USB3 ports downgrading to high speed during low power modes and not returning back to super speed. The patch enables port reset event on USB2 ports. This event is is passed to USB3 upstream ports to upgrade back to super speed (USB3) after a downgrade during low power state. Change-Id: Iac702a8d8edd2b3b7e03abcac020be7e45335821 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82730 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-03soc/intel/meteorlake: Hook up PchHdaAudioLinkHdaEnable to devicetreeMichał Kopeć
The comment that the PchHdaAudioLink UPDs only configure GPIOs is incorrect. Setting this to 1 is needed to enable HDA audio link. Same exact situation as with Alder Lake in CL 71715. Change-Id: Iecbe106ae18b5a8b53c04a5335a4e4c4ae27c7a0 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2024-05-31soc/intel: Fix pointer size mismatch errors in crashlogAppukuttan V K
The crashlog code in intel/common/block and meteorlake soc was casting integer addresses directly to pointer types, which caused compilation errors in x86_64 bit builds. This commit fixes the issue by using uintptr_t for casting integer addresses to pointer types before dereferencing. BUG=b:329034258 TEST=Successfully build Meteor Lake (rex) in both x86_32 and x86_64 modes. Change-Id: I2d0814a8b767270ec140341bfb51d0782469545d Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82481 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31soc/intel/xeon_sp: Add _OSC ASL generation utils for IIO domainsShuo Liu
For multi-SKU/SoC supports, IIO domain layouts are returned from FSP HOBs. Add _OSC ASL generation utils so that static IIO domain layout definition file per SKU/SoC are not needed any more. The _OSC generation codes is a thin AML generation layer which further invokes \_SB.POSC which is defined in ASL. The ASL handler is able to handle boot-time generated info as parameters while keeps good readability for the ease of maintenance. In this case, firmware granted capabilities are calculated in boot time and passed to ASL handler as parameters. TEST=Build and boot on intel/archercity CRB Change-Id: Ibd3bfa2428725fe593754436d5ed75a3a11b4cdc Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2024-05-31soc/intel/meteorlake: Exclude deprecated upd from FSP2.4 buildsAppukuttan V K
EnableMultiPhaseSiliconInit upd is deprecated and has been removed starting with v2.4 of FSP specification. Multi-phase silicon initialization is mandatory for all FSP implementations compliant to v2.4. The following modifications are made: - In fsp_params.c and silicon_init.c EnableMultiPhaseSiliconInit update is guarded so that it will get included only if FSP2.4 is not selected. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Icdbf3bacc0a05975fc941b264fd400d74f506fce Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31soc/intel/meteorlake: Tailor FSP Version Selection for ArchitectureSubrata Banik
* Conditionally select FSP 2.4 when x86_64 support is available (HAVE_X86_64_SUPPORT). * Default to FSP 2.3 otherwise. * Adjust default FSP header path to align with architecture. BUG=b:242829490 TEST=Able to build google/rex in both 32-bit and 64-bit mode. Change-Id: Ib77a34c6bf7bca3485a197f109d1550ac3d51cc0 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31soc/intel/meteorlake: Enable eSOL without 64-bit supportSubrata Banik
This change allows eSOL to be enabled on production Meteor Lake silicon even when 64-bit support is not present. eSOL support is still TBD for 64-bit FSP hence, skip adding this support for 64-bit build. TEST=Able to build and boot google/rex64 w/o eSOL. Change-Id: I16762e5b74ae0aaa3c28730479a1fd9defc4d93c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82716 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-30tree: Remove duplicated <soc/gpio.h>Elyes Haouas
<gpio.h> is supposed to chain-include <soc/gpio.h>. Change-Id: Ib25581bd2c8dd38cdd0396561ce5f9a782365f14 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82691 Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-30vc/intel/fsp/mtl: Add x86_64 FSP V3471.91 headersAppukuttan V K
This commit introduces new header files of V3471.91 for the x86_64 architecture in the fsp2_0/meteorlake directory. FSP2.4 brings FSP 64-bits support and the soc Kconfig file has been updated to select this new header path when FSP2.4 is in use. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Ib41b57e794311db729ac65a968f562aa127e86c3 Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-05-30vc/intel/fsp/mtl: Organize FSP headers into x86_32 directoryAppukuttan V K
This commit moves FSP V3471.91 header files for Meteor Lake into a new x86_32 directory to better organize the files based on the architecture. The Kconfig file has been modified accordingly to reflect the new paths of the relocated headers. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Id30186a8b1b5a9082f498e18a3378f5e9907b668 Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82424 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-30soc/intel/meteorlake: Adjust FSP parameters for FSP2.4 compatibilityAppukuttan V K
This commit updates the type definitions for FSP parameters in the Meteor Lake platform to ensure compatibility with the FSP2.4 specification, that supports 64-bit builds for the first time and this also ensures that parameter types works for both 32-bit and 64-bit builds. - In fsp_params.c, FSPS_ARCH_UPD macro is changed to FSPS_ARCHx_UPD which supports FSP2.4 and older specifications. Special handling is added for FspEventHandler assignment to handle as the variable type is different in both cases. - In meminit.c, the type for SPD pointers is changed from uint32_t to efi_uintn_t to support both 32-bit and 64-bit builds. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Ide220f60184135a6488f4472f69a471e2b383e2a Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82177 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29tree: Remove unused <string.h>Elyes Haouas
Change-Id: I9ed1a82fcd3fc29124ddc406592bd45dc84d4628 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-29tree: Use <stdio.h> for snprintfElyes Haouas
<stdio.h> header is used for input/output operations (such as printf, scanf, fopen, etc.). Although some input/output functions can manipulate strings, they do not need to directly include <string.h> because they are declared independently. Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29tree: Remove unused <stddef.h>Elyes Haouas
Change-Id: I7d7ad562eeff7247b7377b6570d489faee0aeda0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82669 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-28soc/intel/xeon_sp: Add PD_TYPE_CLUSTERShuo Liu
Add a new proximity type to represent the sub-NUMA cluster (SNC). This patch adds necessary Xeon-SP common code level support for SNC support. When SNC on, each SNC cluster will have a proximity domain. DIMMs and CPU cores are attached to SNC proximity domains instead of the processor proximity domains. With SNC, there are 3 types of proximity domains, PD_TYPE_PROCESSOR, PD_TYPE_GENERIC_INITIATOR and PD_TYPE_CLUSTER. proximity domain type checks in Xeon-SP codes are updated to correctly handle the adding of the new type. This patch doesn't actually enable SNC. To fully enable SNC, SoC codes need to override soc_get_cluster_count(), soc_set_cpu_node_ id() and memory_to_pd(), and call soc_set_cpu_node_id() in its per-CPU init routine. Change-Id: I32558983780f302ff4893901540a90baebf47add Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-28soc/intel/xeon_sp: Add domain resource window creation utilsShuo Liu
It might be benefical to have utils for domain resource window creation so that the correct IORESOURCE flags used could be guaranteed. TEST=Build and boot on intel/archercity CRB TEST=Build on intel/avenuecity CRB Change-Id: I1e90512a48ab002a1c1d5031585ddadaac63673e Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-05-28tree: Remove unused <stdarg.h>Elyes Haouas
<stdarg.h> header is used to define macros for handling variable argument lists in functions like printf. It does not depend on the string or memory manipulation functions provided by <string.h>. So let follow conventions and include only the necessary headers in each header file. Change-Id: I07ffc65b7feefb8ec4ab8dd268113f9ed8d24685 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82664 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-28soc/mediatek/mt8188: Decrease OP-TEE image size from 80 MB to 70 MBGavin Liu
The secure buffer shrank from 42 MB to 32 MB, decreasing the total OP-TEE image size from 80 MB to 70 MB. BUG=b:246837563 TEST=emerge-geralt coreboot build coreboot and verify SVP works well Change-Id: I6729e65f83ef994fe59b5bd4ed098e6d3a847695 Signed-off-by: Gavin Liu <gavin.liu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-05-24soc/intel/xeon_sp: Move get_cxl_mode out of soc/util.hShuo Liu
get_cxl_mode() is the interface for CXL mode config check used by SoC codes. It could be implemented by mechanisms outside of the SoC codes, e.g. board codes or OCP VPD driver. Move the interface declaration out of soc/util.h to a dedicated header, a.k.a., soc/config.h, so that the implementation codes do not need to include soc/util.h where there are lots of irrelevant definitions. Future SoC config check interfaces could be added to soc/config.h as well. The default weak implementation is moved out of util.c to config.c as well. TEST=Build and boot on intel/archercity CRB Change-Id: Ia0302b0d3fd93c49e1d6f64e8159f59d50f33e20 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82293 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23device: drop unnecessary CHECK_REV_IN_OPROM_NAME optionFelix Held
The CHECK_REV_IN_OPROM_NAME Kconfig option was introduced to solve the problem of the PCI VID/DID combination of the Picasso iGPU not being sufficient information to know which VGA BIOS file to run, so a new function that additionally checks the PCI revision of that device was introduced. Later it turned out that there might be a case where even that isn't sufficient, so the soc_is_raven2() function is used in the remap function to always use the correct VBIOS file. Picasso is the only SoC that selected the CHECK_REV_IN_OPROM_NAME Kconfig option, so all other SoCs are unaffected by this change. Now that we use the VBIOS images with only the PCI VID and DID in the CBFS file name for Picasso, SeaBIOS will find the VBIOS with the same ID as the iGPU in CBFS and we don't need the workaround to add a third VBIOS image via VGA_BIOS_DGPU_* that has the name that SeaBIOS expects. This will result in SeaBIOS now running the VBIOS that has the same PCI VID/DID as the hardware which will be the wrong one in the RV2 silicon showing the PCO silicon PCI VID/DID, but that was also the case with the VGA_BIOS_DGPU_* workaround where the board's Kconfig just selected one of the two possible images during build time and hoped that it was the correct one for that actual hardware. The only board where this patch might cause a regression compared to the old behavior is the AMD Cereme reference board with Pollock APU, but I'm not even sure if any coreboot developer still has one of those boards, so I'm willing to accept that. To properly solve the problem with SeaBIOS using the correct VBIOS file in all cases, we'd need to generate that info during coreboot runtime and somehow pass it to SeaBIOS, but that's out of scope for this patch. TEST=On Mandolin with PCO silicon, the display output in both SeaBIOS and Ubuntu still works. Booting Windows 10 via the pre-built EDK2 payload that I'm using also resulted in the display output working. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6de533c536044698d85404427719b8f534870fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/82598 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23soc/intel/xeon_sp/gnr/soc_iio: Remove unused <string.h>Elyes Haouas
Change-Id: I8d4500edaa0739921831a3b04131046599c35a87 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-05-23soc/amd/phoenix/chip_opensil.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iba17d44772333ed59e3fdde1443a1862bae8e32f Reviewed-on: https://review.coreboot.org/c/coreboot/+/82606 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-23soc/intel/xeon_sp: Dump proximity domain info per typesShuo Liu
Some proximity domain info are type specifics, e.g. base/size/dev are effective for PD_TYPE_GENERIC_INITIATOR, but not for PD_TYPE_PROCESSOR. Dump info per their type. TEST=Build and boot on intel/archercity Change-Id: I7e722a0577bba954efba3e91cc152c758c001d68 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-05-23soc/intel/xeon_sp: Move proximity domain setting upShuo Liu
Move proximity domain setting up to ahead of attach_iio_stacks() so that proximity domain info could be ready before attach_iio_stacks()/create_xeonsp_domains(). For example in SPR, is_iio_cxl_stack_res() refers to proximity domain info, and it will be called in create_xeonsp_domains(). TEST=Build and boot on intel/archercity No significant boot log difference except for proximity domain dump info display are moved ahead (with correct contents). Change-Id: I594f0ec0c23e3b62c3bdd917ebf6e45be6e4069e Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82267 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22soc/amd/phoenix/chip.h: add USB PHY configuration for openSILFelix Held
Add the USB PHY configuration structs for the openSIL case, so that those can be configured in the devicetree like in the FSP case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ied25e90859c4b1bc9b876bed3f3c46358ca36d32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82584 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22soc/amd/phoenix/chip.h: add DDI configuration for openSILFelix Held
In the FSP case, the DDI descriptors aren't part of the devicetree and are instead retrieved in romstage by calling the mainboard's mainboard_get_dxio_ddi_descriptors function which allows updating the descriptors during romstage where the devicetree is static. In the openSIL case, the DDI configuration is first needed in ramstage, so we can put this info into the devicetree and update it if needed in ramstage. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3de12ff6af42e38751a3016efa313613677fa87a Reviewed-on: https://review.coreboot.org/c/coreboot/+/82580 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-22soc/amd/phoenix/chipset_*.cb: remove TODOFelix Held
Remove the TODO to update the chipset devicetree for Phoenix, since this has already been done. When re-checking the chipset devicetree, I found conflicting information about the existence of the PCI bridge to an external PCIe port on bus 0 device 1 function 5, but after looking into this, I'm reasonably certain that it either doesn't exist or at least wouldn't be usable, so I won't add that one to the chipset devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f0e1540ed45408e86186253d3982a7ba0065ac6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-05-21soc/intel/meteorlake: Add PsysPL2 configurationTony Huang
psys_pl2_watts is configured in SoC node of devicetree. Value represents Watts. BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot Change-Id: I9c4d62b93fc751db9e0ea04e475acb8861a844f8 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-05-16soc/intel/xeon_sp/gnr: Add IIO config utilsGang Chen
Add IIO configuration utils shared in GNR boards to handle the complex IIO configuration settings. Change-Id: If7146761db6f73a0c4b0d31b010c0d30a42bf690 Signed-off-by: Gang Chen <gang.c.chen@intel.com> Co-authored-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-15mb/amd/birman/devicetree_phoenix_opensil: add stub MPIO chipsFelix Held
Add the stub MPIO chips that contain the PCIe engine configuration for the external PCIe interfaces to the devicetree. Birman's port_descriptors_phoenix.c was used as a reference. The static configuration in the devicetree assumes that the default WLAN0_WWAN0 is selected; for the other cases we'll still need to fix up things accordingly in the mutable devicetree. The WLAN01 and WWAN01 cases still need to be handled in a follow-up patch. Since openSIL currently doesn't use the info from the gpio_group struct element, but deasserts both PCIe reset pins GPIO 26 and 27, the gpio_group isn't specified in the chip configuration in the devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icabe60322d46c1195284dd77ec39f9d143e3d2cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/81101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-14soc/intel/xeon_sp: Add Granite Rapids initial codesShuo Liu
coreboot GNR (Granite Rapids) is a FSP 2.4 based, no-PCH, single IO-APIC Xeon-SP platform. The same set of codes is also used for SRF (Sierra Forest) SoC. This patch initially sets the code set up as a build target with Granite Rapids N-1 FSP (src/vc/intel/fsp/fsp2_0/graniterapids). 1. All register definitions are forked from SPR (Sapphire Rapids) and EBG (Emmitsburg PCH)'s codes are reused. 2. src/soc/intel/xeon_sp/chip_gen6.c is newly added as chip common codes for 6th Gen Xeon-SP SoC (Granite Rapids) and later. Change-Id: I3084e1b5abf25d8d9504bebeaed2a15b916ed56b Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Co-authored-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-14soc/intel/common: Add RPL tracehub supportAshish Kumar Mishra
Add PCI ID for RPL tracehub and update the PCI ID in the pci_device_ids[] in tracehub.c. Reference: Raptor Lake External Design Specification Volume 1 (640555) BUG=None TEST=Verified on brox Change-Id: I5d5c6c8ff44bcb5a7bbbd3e27a1577c169ecd6a9 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-05-14soc/intel/common: Add Panther Lake DIDsSaurabh Mishra
Reference: Panther Lake External Design Specification Volume 0.51 (815002) BUG=b:329787286 TEST=verified on Panther Lake Simics Platform. Change-Id: I941d6e1c8a697234b8e64a2523e60587897d7f7a Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81848 Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-13soc/intel/xeon_sp: Use <spd.h>Elyes Haouas
Change-Id: Ib86df42c74474ab6d0bd389073c36ca0761748af Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-05-13soc/amd/common/block/psp: Comment unused symbolElyes Haouas
This adds a comment for unused AMD_FWM_POSITION_20000_DEFAULT. Change-Id: Id8369f488893e7e5b2e7e7126d1b53199ed1aa77 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-05-12soc/intel/lunarlake: Support stepping A0_2Saurabh Mishra
Details: - Add support for new Lunar Lake MCH ID 0x6410 - Add new CPU id 0xb06d1 Reference: Lunar Lake External Design Specification Volume 1 (734362) TEST=Build, boot the system and verfiy MCH-ID prints in bootblock stage. Below prints verified on Lunar Lake RVP board (lnlrvp). [DEBUG] MCH: device id 6410 (rev 02) is LunarLake M Change-Id: I976d7f269485633d835d204afa224736d71baaa8 Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81847 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-12soc/intel/common: Add Lunar Lake CNVI device IDsSaurabh Mishra
Without this patch, ACPI SSDT does not supports and lists CNVW. With this patch, verified "CNVW" in ACPI SSDT listing. Scope (\_SB.PCI0) { Device (CNVW) { Name (_ADR, 0x0000000000140003) // _ADR: Address Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } Reference: Lunar Lake External Design Specification Volume 1 (734362) BUG=b:329787286 TEST=verified on Lunar Lake RVP board (lnlrvp). Change-Id: I5a0a3fbc9f43a6a573e33fcf3901055e10faaed1 Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81846 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-12vc/amd/opensil: introduce common mpio/chip.h header fileFelix Held
The chip drivers in the devicetree use the path where the corresponding chip.h file resides both to include this chip.h file in the static.c generated by util/sconfig from the devicetree and also for the names of the chip config and chip ops struct. To be able to build a SoC using either the MPIO chip driver from the openSIL stub or from the actual openSIL glue code without needing different devicetree files for the different cases, introduce a common MPIO chip.h file that then includes the correct MPIO header file. The chip config and ops structures also need to be renamed to take this change into account. Thanks to Matt for pointing out how to make the path to the actual MPIO chip.h file configurable via a Kconfig setting. This allows overriding this path from site-local without the need to have any reference to site-local in the upstream code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iead97d1727569ec0d23a2b9c4fd96daff4bebcf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82262 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-09mb/google/brox: Sending End of Post (EOP) asynchronouslyKarthikeyan Ramasubramanian
Currently EOP message is sent to CSE late in the boot flow. Instead send it asynchronously to save ~10 ms in boot time. BUG=b:337330958 TEST=Build Brox BIOS Image and boot to OS. Change-Id: I229d16a5dcd072958db3f59a9c364bf7508b3047 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-09soc/mediatek/mt8188: devapc: set devapc permission for MFGFei Yan
In order to support SVP Feature, EMI-MPU has to give MFG permissions to allow MFG to access secure buffer by secure read and write. Currently MFG is in domain 0, which include many other masters. Move MFG to domain 6. Set MFG remap, so that MFG can switch to protect mode by MFG register. Change MFG permission from NO_PROTECTION to SEC_RW_ONLY for domain 0, so that only AP in secure mode can access MFG_S_S-2 and MFG_S_S-5. BUG=b:313855815 TEST=emerge-geralt coreboot Change-Id: Ic6fb7d85bf9d4d92946a045a274b274abc440e1d Signed-off-by: Fei Yan <fei.yan@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-08soc/intel/xeon_sp/spr: Refine return value checksShuo Liu
mp_init_with_smm returns cb_err type, where 0 means success and negative values represent error (see cb_err.h). However, failure checks in form of "ret < 0" is not straightforward. Use "ret != CB_SUCCESS" instead. Change-Id: I7e57f2da0361f3109051e9a35b1cce81d559b261 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-07soc/intel/meteorlake: Determine TBT controllers exist by VID/DIDKane Chen
The original code uses TRE0-TRE3 register to determine whether or not the TBT controller exists. However, there is a remap in fsp could confuse the TRPx._STA. Ex: Disable TBT controller 0 on b:0 d:7 f:0 Enable TBT controller 1 on b:0 d:7 f:1 The FSP will do the remap and after the remap: TBT controller 1 is on b:0 d:7 f:0 TBT controller 0 is on b:0 d:7 f:1 This is becuase func 0 must exist per pci spec. However, the TRE0-TRE3 will not be remapped so that the ACPI TRPx._STA method could be confused. In such scenario, TRP0._STA will return 0x0, TRP1._STA will return 0xf which is wrong because TBT controller 1 is now at b:0 d:7 f:0 TEST=tested on rex and _TRPx._STA returns correctly. TBT function OK Change-Id: I54f2ea99cd1ec73dd0b71a6ba738aa927b0ae80f Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-05-07soc/intel/mtl: Fixed TBT PCIe devtree remappingKane Chen
The TBT PCIe devicetree settings are not remapped properly when TBT PCIe port 0 is disabled. This code refer SHA:58bc5d937 to remap the PCIe devtree settings properly in case of TBT PCIe port0 is disabled, TEST=Tested on screebo and found "Remapping PCIe Root Port #2 msg" showed up in coreboot log Change-Id: I7c7549ddf8ccdd67d7af7c69f51a84614cff9a03 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81841 Reviewed-by: Jakub Czapiga <czapiga@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-07device/dram/ddr{3,4}: Rename spd_raw_data for specific DDRElyes Haouas
Rename different spd_raw_data[] for DDR3 and DDR4. This is to solve the conflict when we include both "ddr3.h" and ddr4.h" for example here: src/device/dram/spd.c. Otherwise, it won't compile as DDR3 and DDR4 have different spd_raw_data[] size. Change-Id: I46597fe82790410fbb53d60e04b7fdffb7b0094a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-07device/device_util: Add and use is_pci_bridge()Shuo Liu
TEST=Build and boot on intel/archercity CRB Change-Id: Ied4921f7dc7e144e580d05d4f2262777aa59d895 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81566 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-07soc/intel/xeon_sp/spr: Print return codes for mp_init_with_smmShuo Liu
TEST=Build and boot on intel/archercity CRB Change-Id: Iee2234a3055fe8a94ecbfc820e9ff9e981f8dff2 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-07soc/intel/xeon_sp/spr: Remove duplicated warningShuo Liu
When microcode is not found, intel_microcode_find() will output warning and skip the update. Remove the duplicated warning in CPU codes. TEST=Build and boot on intel/archercity CRB Change-Id: I0264edc01e90186a7b77d57f9c147d3b73747437 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-07soc/intel/xeon_sp/spr: Add comments for get_thread_countShuo Liu
Add comments to clarify the usage of logical core count instead of physical core count. TEST=Build and boot on intel/archercity CRB Change-Id: I2bc94391f060cec9de91183021da03bc5c7438c0 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82097 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-07soc/intel/xeon_sp/spr: Remove unused file includes in cpu.cShuo Liu
TEST=Build and boot on intel/archercity CRB Change-Id: I17b42331fa9b5f59d1fb1d66b9155c57e258357b Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82191 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06soc/intel/xeon_sp: Add fill_pd_distancesShuo Liu
Update a simple algorithm to cover some basic case for proximity domain distance handling. In the same time, the local variable usage of fill_pds() is optimized. TEST=Build and boot on intel/archercity CRB ACPI SRAT, SLIT and DMAR (Remapping Hardware Static Affinity) are generated correctly for 2S system. Change-Id: I2b666dc2a140d1bb1fdff9bc7b835d5cf5b4bbc5 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81442 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 00:09:57 +0000