summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2021-11-02soc/amd/common/block/cpu: Add support for cbfs_cache regionRaul E Rangel
This change adds the cbfs_cache region into the x86 memlayout. The SoC or mainboard can decide how big the region should be by specifying CBFS_CACHE_SIZE. BUG=b:179699789 TEST=Build guybrush and verify cbfs_cache region wasn't added. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I268b6bc10906932ee94f795684a28cfac247a68c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-02psp_verstage: convert relative address in EFS2Kangheui Won
Addresses in AMD fw table with EFS gen2 are relative addresses, but PSP doesn't accept relative addresses in update_psp_bios_dir(). Check for EFS gen2 and convert them as needed. BUG=b:194263115 TEST=build and boot on guybrush and shuboz Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I95813beba7278480e6640599fcf7445923259361 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-02lib: Add new argument as `ddr_type` to smbios_bus_width_to_spd_width()Subrata Banik
Add DDR5 and LPDDR5 memory type checks while calculating bus width extension (in bits). Additionally, update all caller functions of smbios_bus_width_to_spd_width() to pass `MemoryType` as argument. Update `test_smbios_bus_width_to_spd_width()` to accommodate different memory types. Create new macro to fix incorrect bus width reporting on platform with DDR5 and LPDDR5 memory. With this code changes, on DDR5 system with 2 Ch per DIMM, 32 bit primary bus width per Ch showed the Total width as: Handle 0x000F, DMI type 17, 40 bytes Memory Device Array Handle: 0x0009 Error Information Handle: Not Provided Total Width: 80 bits Data Width: 64 bits Size: 16 GB ... BUG=b:194659789 Tested=On Alder Lake DDR5 RVP, SMBIOS type 17 shows expected `Total Width`. Change-Id: I79ec64c9d522a34cb44b3f575725571823048380 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-01soc/intel: Don't send CSE EOP if CSME is disabledSean Rhodes
CSE EOP will fail if the CSE is disabled (CB:52800) Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic00fdb0d97fefac977c0878d1d5893d07d4481ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/57149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-01soc/intel/braswell: Set GNVS DPTE via devicetreeAngel Pons
Introduce the `dptf_enable` devicetree setting to set the DPTE GNVS field, as newer Intel platforms do. Change-Id: I88b746c64ca57604f946eefb00a70487a2fb27c0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-11-01soc/intel/braswell/chip.h: Use `bool` typeAngel Pons
Use `bool` type where applicable. Change-Id: I4d5422c16381676738b8614e8e50737b59739921 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-11-01amd/lpc: Remove the weak functionZheng Bao
BUG=b:140165023 Change-Id: Idb4613dc08c8dee6c92b4dabb39c2f5c189471aa Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-01soc/intel/common/block/cse: Add get_me_fw_version functionJohnny Lin
Modify print_me_fw_version to get ME firmware version by calling it. Tested=On a not yet to be public platform, verified the function can get ME FW version successfully. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I50d472a413bcaaaa085955657bde6a0e6ec2c1db Reviewed-on: https://review.coreboot.org/c/coreboot/+/58520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-30lib: Use `smbios_bus_width_to_spd_width` for setting dimm.bus_widthSubrata Banik
Make use of `smbios_bus_width_to_spd_width()` for filling DIMM info. Additionally, ensures dimm_info_util.c file is getting compiled for romstage. TEST=dmidecode -t 17 output Total Width and Data Width as expected. Change-Id: I7fdc19fadc576dec43e12f182fe088707e6654d9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29soc/intel/alderlake: Add ACPI addition for USB4/TBT latency optimizationJohn Zhao
The PCI-SIG engineering change requirement provides the ACPI additions for firmware latency optimization. This change adds additional ACPI DSM function with both of FW_RESET_TIME and FW_D3HOT_TO_D0_TIME to the USB4/TBT topology which has the same implementation on Tiger Lake in commit I5a19118b75ed0a78b7436f2f90295c03928300d7. BUG=b:199757442 TEST= It was validated that the first connected device waits only 50ms instead of 100ms and all functions work on Alder Lake platform boards. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I0c8977c96de27ab0e554469eba658660975b8493 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29soc/intel/apollolake: Fix BUG-message when checking for XDCI deviceWerner Zeh
The current check for XDCI enabled uses a static device path to an internal PCI device at a very late point in the boot flow. At this time the devicetree has been processed and disabled devices have been already removed. If this device (00:15.1, XDCI) is disabled in devicetree this will trigger the message 'BUG: check_xdci_enable requests hidden 00:15.1' in the log. This looks weird and is wrong since it is not a bug to disable this device when it is not needed. To avoid this look up the devicetree by a tree walk instead of using a static value for the devicetree. Change-Id: If193be724299c4017e7e10142fac8db9fac44383 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-29soc/intel/icelake: select SOC_INTEL_COMMON_BLOCK_ACPI_GPIOArthur Heymans
The Intel icelake rvp boards actually rely on this but this failure was hidden in a runtime error instead of a compile time error, due to weakly linked functions. Change-Id: Idbbe774efa1515ce1d34ce2ce8f87953300a3312 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58662 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27soc/intel/common/acpi: Correct IPC sub command for reading LPM requirementEthan Tsao
Modify IPC sub command to 2 from 0 for reading LPM requirement from PMC. Reference: https://github.com/otcshare/CCG-ADL-Generic-Full ClientOneSiliconPkg\Include\Register\PmcRegs.h #define V_PMC_PWRM_IPC_SUBCMD_GEN_COMM_READ 2 It is consumed in below. ClientOneSiliconPkg\IpBlock\Pmc\Library\PeiDxeSmmPmcLib\PmcLib.c Change-Id: I58509f14f1e67472adda78e65c3a2e3ee9210765 Signed-off-by: Ethan Tsao <ethan.tsao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27soc/amd/common/block/graphics: add missing GPU PCI IDsFelix Held
Since the iGPU PCI device IDs for AMD Renoir (family 17h, model 60h) and Lucienne (family 17h, model 68h) are already defined in pci_ids.h, also add them to the pci_device_ids list in the common AMD graphics support block. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1c554d21eece182ecea7b09b45b7aa8a733425d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86/Kconfig.debug_cpu: drop HAVE_DISPLAY_MTRRS optionFelix Held
Since all x86 CPUs in tree have MTRR support, there is no need to guard the DISPLAY_MTRRS option with HAVE_DISPLAY_MTRRS. Also all x86 CPUs/SoCs have a display_mtrrs call at least somewhere in their code, so selecting the DISPLAY_MTRRS option will always have an effect. All SoCs that don't select RESET_VECTOR_IN_RAM have the postcar stage where it gets called. The two AMD SoCs that select RESET_VECTOR_IN_RAM use the FSP2 driver which contains plenty of display_mtrrs calls. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2894689ce58e7404d9d5a894f3c288bc4016ea19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/intel/quark/Kconfig: don't unselect CPU_X86_LAPICFelix Held
The Intel Quark SoC does have a LAPIC on its x86 CPU core, so we should select CPU_X86_LAPIC. This will additionally include the Makefile from cpu/x86/lapic. Since none of AP_IN_SIPI_WAIT, LEGACY_SMP_INIT and UDELAY_LAPIC gets selected, only the boot_cpu.c and lapic.c targets will be added to the build. Since SMP isn't set, adding the boot_cpu.c target won't change the resulting binary of a timeless build, since the only function inside will be removed by the compiler's pre-processor in the !SMP case. So the only thing that will change the resulting binary is the addition of the lapic.c target. From this target only the function cpu_get_lapic_addr will be used which overrides the weak implementation in acpi/acpi.c. The call in arch/x86/mpspec.c can be ignored, since GENERATE_MP_TABLE isn't selected. So this change will result in the LAPIC address in the MADT being changed from 0 to to LAPIC_DEFAULT_BASE. Since the documentation of the Quark SoC mentions that it has a LAPIC on its one x86 core, this should work. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2f163bd608f0548abb0e8de90843d2a796b8ef6c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-26soc/intel/alderlake: set lock offset for gpio pad communitiesNick Vaccaro
Initialize the pad_cfg_lock_offset field for the various gpio pad_community structures in the adl_communities. BUG=b:201430600 TEST='emerge-brya coreboot' and verify it compiles successfully. Change-Id: I2cd3e43a84b0140bb2aeae5de1e299db714d419b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-26soc/intel: Update api name for getting spi destination idWonkyu Kim
Update api name and comments to be more generic as spi destination id is not DMI specific. Update api name as soc_get_spi_psf_destination_id and comments. And move PSF definition from pcr_ids.h as it's not pcr id. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie338d05649d23bddae5355dc6ce8440dfb183073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2021-10-26soc/example/min86/Kconfig: don't unselect CPU_X86_LAPICFelix Held
Since all multi-core x86 CPUs need to have LAPICs, this option should be selected for soc/example/min86. TEST=The example/min86 mainboard still builds. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5aa6e850f0b4dca27309385ba889b04335fe4f0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/*/Makefile: don't add cpu/x86/cacheFelix Held
No SoC uses the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I7c5039e1341fd4089078ad7ffb2fe6584a94045c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/intel/common: Add HECI Reset flow in the CSE driverSridhar Siricilla
This change is required as part of HECI Interface initialization in order to put the host and CSE into a known good state for communication. Please refer ME BIOS specification for more details. The change adds HECI interface reset flow in the CSE driver. It enables coreboot to send HECI commands before DRAM Init. BUG=b:175516533 TEST=Run 50 cold reset cycles on Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ie078beaa33c6a35ae8f5f460d4354766aa710fba Reviewed-on: https://review.coreboot.org/c/coreboot/+/55363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-26soc/intel/adl: Skip sending MBP HOB to save boot timeMAULIK V VAGHELA
MBP Hob is being generated by FSP after getting data from ME. coreboot does not consume this HOB and FSP provides an option for bootloader to skip generation of MBP HOB. This will help in saving ~14 ms of boot time. Here is the data from Brya P1 Board: Before: 955 returning from FspSiliconInit 879,432 (99,156) After: 955 returning from FspSiliconInit 1,177,513 (84,506) BUG=b:188577893 BRANCH=None TEST=No functional impact on Brya system and boot time is reduced with this patch. Change-Id: Ibb64e4d0f4ae7212defb6704b05a78e754f75cd7 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58289 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-25sc7280: Add AOP FW download supportRavi Kumar Bokka
AOP firmware support from sc7280. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ib7027cdf78a9cdcccc8cfff7eef3cc540fb4093e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/qualcomm: Commonize AOP firmware supportRavi Kumar Bokka
Move AOP firmware support from qualcomm/sc7180 into qualcomm/common BUG=b:182963902 TEST=Validated on qualcomm sc7180 development board Change-Id: I90b0f48e15df390970e027bff2065b7a89b14cec Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/qualcomm/sc7280: define the aop symbolsRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I62044f6fcb301c0ca35c42598f998913f9b94b95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/amd/common/block/lpc/Makefile: simplify handling spi_dma.cFelix Held
Use the verstage_x86 class for the spi_dma.c target instead of using the verstage class and guarding it with !VBOOT_STARTS_BEFORE_BOOTBLOCK. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9b8cafd1ef17df8c485f6594bc0928cea88e436b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25cpu,soc/amd/*/Makefile: don't add cpu/x86/pae a second timeFelix Held
Since cpu/x86/Makefile.inc already adds the pae sub-directory, there is no need to include it in the Makefile of a CPU or SoC, so remove it from those Makefiles. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I78368f7eb880fb64f511a2fa8c8acde222d0dca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-25soc/intel/common: Skip CSE post hook when CSE is disabledSubrata Banik
This patch fixes regression introduced by commit bee4bb5f0 (soc/intel/common/cse: Late sending EOP msg if !HECI_DISABLE_USING_SMM) FAFT test case fail when doing `firmware_DevMode` test. If CSE is already hidden then accessing CSE registers would be wrong and will receive junk, hence, return as CSE is already disabled. BUG=b:203061531 TEST=Brya system can boot to OS with recovery mode. Change-Id: I2046eb19716c397a066c2c41e1b027a256bd6cf9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22soc/amd/cezanne,picasso/chipset.cb: drop LAPIC deviceFelix Held
After adding code to handle the case of missing the link/bus on the CPU cluster device in mp_cpu_bus_init, there's no need to have the LAPIC device in the devicetree any more. TEST=Mandolin still boots successfully. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icfc4fb61b373129f3bf4f4de09c38076a8f66733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22soc/intel/denverton_ns: use mp_cpu_bus_initFelix Held
After adding the functionality to add a bus/link on the CPU cluster device in mp_cpu_bus_init if it is missing due to no LAPIC device being present in the devicetree below the CPU cluster device, we can use mp_cpu_bus_init as init function in cpu_bus_ops and implement mp_init_cpus. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I76aebeca1b3227cfd310b6c45f506c042b35ae04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22soc/intel/elkhartlake: Add PSE PCI devices into header fileLean Sheng Tan
Since PSE devices could be initialized as either host owned (PCI devices) or PSE owned (will be hidden from coreboot and only visible to PSE interface), add all PSE devices in PCI list header file for future usage. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iaa40cdcb021d05e50504dd85f94e9c021e284d00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58466 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22sb,soc/intel: Replace set_ioapic_id() with setup_ioapic()Kyösti Mälkki
This adds delivery of PIC/i8259 interrupts via ExtNMI on the affected platfoms. Change-Id: If99e321fd9b153101d71e1b995b43dba48d8763f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-22sb,soc/intel: Set IOAPIC max entries before APIC IDKyösti Mälkki
This allows to replace set_ioapic_id() call with setup_ioapic() that also clears redirection table entries. Change-Id: I854f19c997a96bcdccb11a0906431e3291788cb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-22sb,soc/intel: Set IOAPIC redirection entry countKyösti Mälkki
The number of redirection table entries (aka interrupt vectors) inside an I/O APIC may depend of the SKU, with the related register being of type read/write-once. Provide support utilities to either lock or set this registers value. Change-Id: I8da869ba390dd821b43032e4ccbc9291c39e6bab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-22soc/intel/braswell: use mp_cpu_bus_initFelix Held
Implement mp_init_cpus and use mp_cpu_bus_init as init function in cpu_bus_ops. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2adcb1e1d79ced804925c81095cc5c0c2e6f9948 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22soc/intel/baytrail: use mp_cpu_bus_initFelix Held
Implement mp_init_cpus and use mp_cpu_bus_init as init function in cpu_bus_ops. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I057ae8d95bdc510e9e7afb144b692531107fa45d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: use cb_err as status return type in remaining functionsFelix Held
Using cb_err as return type of mp_run_on_aps, mp_run_on_all_aps, mp_run_on_all_cpus and mp_park_aps clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of all 4 functions listed above against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4b3f03415a041d3ec9cd0e102980e53868b004b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21soc/amd/common/block/cpu/smm/finalize: simplify finalize_coresFelix Held
The local variable int r isn't needed, so remove it. This is a preparation to change the return type of mp_run_on_all_cpus from int to enum cb_err which will be done in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie4c454cbfcc581be41ea3463ea6f852a72886128 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21soc/intel/skylake/cpu: rework failure handling in post_mp_initFelix Held
Use a boolean type to store the information if any mp_run_on_all_cpus call failed. This is a preparation to change the return type of mp_run_on_all_cpus from int to enum cb_err which will be done in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic04ad3e4a781a00ee6edcd7dbd24bc7601be1384 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21acpigen,soc/amd,cpu/intel: rework static DWORD for CPPC tableMichael Niewöhner
Some elements in the ACPI CPPC table allow static DWORDs. Instead of using a fake register resource, use a tagged union with the two types "register" and "DWORD" and respective macros for CPPC table entries. Test: dumped SSDT before and after do not differ. Change-Id: Ib853261b5c0ea87ae2424fed188f2d1872be9a06 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-20soc/amd/common/block/cpu: Remove magic number in memlayoutRaul E Rangel
The SPI DMA controller can only perform transactions on a cache line boundary. This change removes the magic number and uses the #define to make it clear. BUG=b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie7b851dc2433e44a23224c3ff733fdea5fbcca0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20soc/intel/alderlake: Fix wrong FIVR configs assignmentBora Guvendik
For PchFivrExtVnnRailSxEnabledStates, vnn_enable_bitmap config is used by mistake, instead of the expected vnn_sx_enable_bitmap Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Idf100be3ac4d6d97335c627e790c1870558d1210 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20psp_verstage: remove psp_ef_table structKangheui Won
psp_efs.h now has embedded_firmware struct which is copied from amdfwtool. Remove psp_ef_table from psp_verstage and use it instead to remove duplicates. TEST=boot on zork and guybrush Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ia362445cb7fc565b2d963f264461d833dc0338d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-20soc/intel/{skl,apl}: don't run or even include SGX code if disabledMichael Niewöhner
Do not run or include any code in case the user did not explicitly enable SGX through `SOC_INTEL_COMMON_BLOCK_SGX_ENABLE`. Also move the ifdef inside the ASL file. Change-Id: Iec4d3d3eb2811ec14d29aff9601ba325724bc28c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-10-19soc/intel/skl: Constify `soc_get_cstate_map()`Patrick Georgi
This is a follow-up to commit e9f10ff38b which changed the base signature and all other occurrences. To make gcc11 happy (which is pickier about these things), let skylake follow. Change-Id: I42a629d865baa53640213a03e54e85623a386e35 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58458 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-19soc/intel/common/block/cse: Use newly added `create-cse-region`Furquan Shaikh
This change uses the newly added `create-cse-region` command for cse_serger tool instead of performing `dd` operations for each partition. BUG=b:189177580 Change-Id: Ia915e3ac423f9461876e9ae186fb8ddce55f3194 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19soc/intel/common/cse: Support RW update when stitching CSE binaryFurquan Shaikh
This change updates the STITCH_ME_BIN path to enable support for including CSE RW update in CBFS. CSE_RW_FILE is set to either CONFIG_SOC_INTEL_CSE_RW_FILE or CSE_BP2_BIN depending upon the selection of STITCH_ME_BIN config. BUG=b:189177580 Change-Id: I0478f6b2a3342ed29c7ca21aa8e26655c58265f4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19soc/intel/alderlake: Enable support for CSE stitchingFurquan Shaikh
This change enables support for stitching of BP1 and BP2 partitions for CSE. This currently mimics what Intel FIT tool does w.r.t. adding different components to the different partitions. BP1: * Dummy components: DLMP, IFPP, SBDT, UFSP, UFSG, OEMP. * Decomposed components from CSE FPT file: RBEP, MFTP. * Input components: PMCP, IOMP, NPHY, TBTP, PCHC. BP2: * Dummy components: DLMP, IFPP, SBDT, UFSP, UFSG, OEMP, ISHP. * Decomposed components from CSE FPT file: RBEP, FTPR, NFTP. * Input components: PMCP, IOMP, NPHY, TBTP, PCHC, IUNP. BUG=b:189177580,b:189177538 Change-Id: I2b14405aab2a4919431d9c16bc7ff2eb1abf1f6b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19soc/intel/common/cse: Add support for stitching CSE componentsFurquan Shaikh
This change adds support for allowing mainboards to stitch CSE components during build time instead of adding a pre-built CSE binary. Several Kconfig options are added to allow mainboard to provide the file names for different CSE region components. This makes use of the newly added cse_serger and cse_fpt tools to create following partitions: 1. BP1 - RO 2. BP2 - RW 3. Layout In addition to this, it accepts CSE data partition as an input using Kconfig CSE_DATA_FILE. All these partitions are then assembled together as per the following mainboard FMAP regions: 1. BP1(RO) : CSE_RO 2. BP2(RW) : CSE_RW 3. Layout : CSE_LAYOUT 4. Data : CSE_DATA Finally, it generates the target $(OBJ_ME_BIN) which is used to put together the binary in final coreboot.rom image. Several helper functions are added to soc/intel/Makefile.inc to allow SoCs to define which components use: 1. Decomposed files: Files decomposed from Intel release CSE binary in FPT format. 2. Input files: Mainboard provided input files using corresponding Kconfigs. 3. Dummy: Components that are required to have dummy entries in BPDT header. These helpers are added to soc/intel/Makefile.inc to ensure that the functions are defined by the time the invocations are encountered in SoC Makefile.inc. BUG=b:189177580 Change-Id: I8359cd49ad256703285e55bc4319c6e9c9fccb67 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19soc/intel: Constify `soc_get_cstate_map()`Angel Pons
Return a read-only pointer from the `soc_get_cstate_map()` function. Also, constify the actual data where applicable. Change-Id: I7d46f1e373971c789eaf1eb582e9aa2d3f661785 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-19acpi/acpigen: Constify CST functions' pointersAngel Pons
The `acpigen_write_CST_package` and `acpigen_write_CST_package_entry` functions don't modify the provided C-state information. So, make the pointer parameters read-only to enforce this. Also constify arguments where possible. Change-Id: I9e18d82ee6c16e4435b8fad6d467e58c33194cf4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-19soc/intel/*/acpi.c: Don't copy structs with `memcpy()`Angel Pons
A regular assignment works just as well and also allows type-checking. Change-Id: Id772771f000ba3bad5d4af05f5651c0f0ee43d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-19soc/amd/common/block/include/psp_efs: don't typedef structFelix Held
Don't use a typedef for the embedded_firmware struct so that it's clearer that this is a struct. TEST=Timeless build for google/guybrush results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I97a02c350af57c8f58014aaf7dda8b4796905ff3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-10-19soc/amd/common/block/include/psp_efs: rename embedded_firmware elementsFelix Held
The element at offset 0x14 in the embedded_firmware struct is the pointer to the combo PSP directory header, so rename it from comboable to combo_psp_directory to clarify that this is not a flag, but a pointer to a data structure. Also rename psp_entry to psp_directory since it points to the PSP directory table. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia70e97f10f4fa0ac63cc65a33ecdc956538482b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-10-18sc7280: Add GSI FW download supportRavi Kumar Bokka
Add GSI Firmware download support for QUP wrappers. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I68c106c942acadc752351f03843d93612cf9c19f Reviewed-on: https://review.coreboot.org/c/coreboot/+/56590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-18ACPI: Have common acpi_fill_mcfg()Kyösti Mälkki
As long as there is only one PCI segment we do not need more complicated MCFG generation. Change-Id: Ic2a8e84383883039bb7f994227e2e425366f9e13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-18intel/tigerlake: Add missing IRQ for CNViSean Rhodes
Add CNVi (14.3) to IRQ Table to stop dmesg error: iwlwifi 0000:00:14.3: can't derive routing for PCI INT F iwlwifi 0000:00:14.3: PCI INT F: not connected Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I5b793997f9ea954217871eb4656dacf6abe77e74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-18soc/skylake: Make VT-d controllable from CMOS optionSean Rhodes
Make VT-d enable or disable based on CMOS value "vtd" 1 = Enable 0 = Disable Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1aea14968e08ee6af822bd259ca1d462f8926994 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel/skylake: switch to common ACPI codeMichael Niewöhner
Use the common ACPI code to reduce code duplication. After this change, `PSS_MAX_ENTRIES` is honored correctly in P-state table generation (as of commit c2540a9) and the number reduces from 10 to 7 entries. Also, remnants of P_BLK support missed in CB:58096 will vanish. Tested on google/fizz: no errors in dmesg, ACPI tables remain the same (except PSS, as mentioned above). Change-Id: I1ec804ae4006a2d9b69c0d93a658eb3b84d60b40 Tested-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-10-17soc/intel/{common,apl,glk}: guard PM Timer option on SoCs w/o PM TimerMichael Niewöhner
Apollo Lake and Gemini Lake do not have a hardware PM ACPI timer but only uCode PM Timer emulation. Add a Kconfig `NO_PM_ACPI_TIMER` denoting SoCs without PM Timer and make it mutually exclusive with the Kconfig `USE_PM_ACPI_TIMER`. This is partly redundant to `PM_ACPI_TIMER_OPTIONAL`, which will be dropped in the follow-up change, though. Change-Id: Ic323bbfb7089c53a6f22724910a0ff3df8904ebd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel/*: only enable PM Timer emulation if the PM Timer is disabledMichael Niewöhner
uCode PM Timer emulation is only needed when the hardware PM ACPI timer is disabled. Also, since it redirects any register accesses to uCode, it overrides the hardware PM Timer. Thus, only enable emulation when required. Change-Id: I60a775bd6eb4206750f606ce8a8777d2e2dfb579 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel: transition full control over PM Timer from FSP to corebootMichael Niewöhner
Set `EnableTcoTimer=1` in order to keep FSP from 1) enabling ACPI Timer emulation in uCode. 2) disabling the PM ACPI Timer. Both actions are now done in coreboot. `EnableTcoTimer=1` makes FSP skip these steps in any possible case including `SkipMpInit=0`, `SkipMpInit=1`, use of the MP PPI or FSP Multiphase Init. This way full control is left to coreboot. Change-Id: I8005daed732c031980ccc379375ff5b09df8dac1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
2021-10-17soc/intel/{skl,cnl,dnv}: disable PM ACPI timer if chosenMichael Niewöhner
Disable the PM ACPI timer during PMC init, when `USE_PM_ACPI_TIMER` is disabled. This is done to bring SKL, CNL, DNV in line with the other platforms, in order to transition handling of the PM timer from FSP to coreboot in the follow-up changes. For SKL and CNL, this temporarly redundantly disables the PM Timer, since FSP does that, too. This redundancy is resolved in the follow-up. Change-Id: I47280cd670a96c8fa5af107986496234f04e1f77 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel: implement ACPI timer disabling per SoC and drop common codeMichael Niewöhner
Since it's just a one-liner, implement disabling of the ACPI timer in soc code. This reduces complexity. Change-Id: I434ea87d00f6e919983d9229f79d4adb352fbf27 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel: move disabling of PM Timer to SoC PMC codeMichael Niewöhner
Move disabling of PM Timer to SoC PMC code. The original reason for placing that in `finalize` [1] was FSP hanging due to use of the PM timer without enabling timer emulation first in coreboot, which was added later [2]. [1] commit 6c1bf27dae (intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdown) [2] commit f004f66ca7 (soc/intel/skylake: Enable ACPI PM timer emulation on all CPUs) Change-Id: I354c3aea0c8c1f8ff3d698e0636932b7b76125f7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel/common: add possiblity to override GPE0 to acpi_fill_soc_wakeMichael Niewöhner
Currently, only the PM1_STS mask gets passed to `acpi_fill_soc_wake`. To be able to override the GPE0_STS mask as well, also pass that one. To accomplish that, pointers to the variables are passed now. Change-Id: If9f28cf054ae8b602c0587e4dd4a13a4aba810c7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel/common/acpi: drop `RTC_EN` from static wake bits maskMichael Niewöhner
`RTC_EN` is in the RTC well* so we can rely on the actual register content instead of statically overriding it. Drop it from the static wake bits mask. * Tested on clevo/l140cu Change-Id: Ia0ae71f0a472513233bc0fd5625faf15bf86beaf Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-17soc/intel: deduplicate acpi_fill_soc_wakeMichael Niewöhner
The PM1_EN bits WAK_STS, RTC_EN, PWRBTN_EN don't need any SoC-specific handling. Deduplicate `acpi_fill_soc_wake` by setting these bits in common code. Change-Id: I06628aeb5b82b30142a383b87c82a1e22a073ef5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel/skylake: switch to common GNVSMichael Niewöhner
Switch to common GNVS. No additional fields to those being present in common GNVS are used by any SKL/KBL device. Thus, they're dropped completely. Change-Id: I87ab4ab05f6c081697801276a744d49e9e1908e0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-10-17soc/intel/common: add SGX fields to GNVSMichael Niewöhner
Add the SGX fields to the GNVS. This is required for Skylake to use the common GNVS. Change-Id: I0077260b7eb1bc2b2fe2af69ac039b38ca0e7423 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-16soc/amd/stoneyridge/include/iomap: rename I2C[ABCD]_BASE_ADDRESS definesFelix Held
Picasso and Cezanne define and use APU_I2C[01234]_BASE for the base addresses of the I2C controllers, so align Stoneyridge with this. The ACPI device names aren't changed from I2C[ABCD] to I2C[0123] for now since this might change behavior in the OS and would also change the resulting binary of a timeless build. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c400c073eba5c14bd35703b717f75df89a8719d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58370 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-16soc/intel/dnv_ns: enable uCode PM Timer emulationMichael Niewöhner
Denverton-NS supports uCode PM Timer emulation, according to Intel doc#558579 rev2.2. Thus, enable it. Change-Id: I21f55816da9f5e240fdf01a0e92b67b09ef38599 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-16soc/intel/pmc: add a note about legacy OSes/payloads to PM Timer KconfigMichael Niewöhner
Since ACPI 5.0A it is allowed to disable the ACPI Timer, when the according FADT flag `ACPI_FADT_PLATFORM_CLOCK` is unset. Starting with Skylake, most platforms (except Xeon-SP) support PM Timer emulation, so even legacy OSes and payloads should work fine with the hardware PM Timer disabled. However, when the `TMR_STS` functionality is required, some legacy OSes might still not work (properly). Add a note about this to the Kconfig help. Change-Id: I53f1814113902124779ed85da030374439570688 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
2021-10-16soc/intel/{common,skl}: set ACPI_FADT_PLATFORM_CLOCK based on KconfigMichael Niewöhner
The FADT contains a flag `ACPI_FADT_PLATFORM_CLOCK` telling the OSPM if a specification-compliant PM Timer is present. Currently, this flag is set regardless of the timer being enabled or disabled. To be specification-compliant, only set that flag, when the hardware PM Timer is enabled. This changes behaviour of all mainboards defaulting to USE_PM_ACPI_TIMER=n. Note: On platforms supporting uCode PM ACPI Timer emulation, this is required, too, because emulation does not support `TMR_STS`. Any OS or software checking this flag and thus relying on the overflow flag would not work (properly). Change-Id: Id2e5d69b5515c21e6ce922dab2cb88b494c65ebe Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-15soc/amd/common: move configure_espi_with_mb_hook implementationFelix Held
Move the actual implementation of configure_espi_with_mb_hook out of the header file and into the espi_util.c file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1106e69a52bf329a41e8e12fd09db846310b102a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd: make configure_espi_with_mb_hook call conditionalFelix Held
If a system doesn't use eSPI or has the eSPI interface already configured in verstage on PSP, not calling configure_espi_with_mb_hook from fch_pre_init makes it a bit more obvious that the eSPI interface initialization will be skipped. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia77b83d56a5dab1bac6cfbbd92d33aa60a9e8b89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/common/include/espi: rename configure_espiFelix Held
Rename configure_espi to configure_espi_with_mb_hook to clarify that this function will call into the mb_set_up_early_espi function in the mainboard-specific code if it exists. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5d0f099288b0100242629c736dd69a8add977b5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/stoneyridge/acpi/sb_fch: use I2C[ABCD]_BASE_ADDRESS definesFelix Held
Now that the I2C[ABCD]_BASE_ADDRESS defines aren't macros that calculate the MMIO addresses any more, those defines can also be used in the ACPI code. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7de2f83dc2f8061d8f1735caf10314bcddb2d3fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/58337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/stoneyridge/include/iomap: drop I2C_BUS_ADDRESS(x) macroFelix Held
The I2C_BUS_ADDRESS(x) macro isn't used to iterate over the I2C controller base addresses, so drop this and use the fixed MMIO address for the I2C[ABCD]_BASE_ADDRESS defines instead which also allows using those defines in the ACPI code. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idd7484a0322dc5167cbb7fdcd9a2583f0dbed50e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/common/block/i2c: implement proper read_resourceFelix Held
Before this patch the reservation of the MMIO region of the I2C controllers was done in the LPC controller PCI device despite the I2C controllers already being devices in the devicetree. This patch implements this functionality as read_resources function of the I2C device instead. This will only reserve the memory when the I2C devices are enabled in devicetree which is a change from the previous behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I67c853df3be2f593ecfa113ae2f74e5df7cf74e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58307 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15soc/intel/common/cse: Split CSE metadata into two CBFS filesFurquan Shaikh
This change splits CSE metadata structure (added to CBFS) into two separate CBFS files (me_rw.hash and me_rw.version). Since `struct cse_rw_metadata` is now used, it is dropped completely. This change is being made in order to prepare for the upcoming changes to stitch CSE binary at build time. Since the binary might not be available pre-built, it complicates the order of operations for the addition of CSE metadata structure and declaring hash and version as CPPFLAGS_common. Instead rules can be enabled for individual CBFS file targets for hash and version that ensure proper ordering as well. BUG=b:184892226 TEST=Ensured that update works correctly on brya by forcing version mismatch. In case of version match, no update is triggered. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7c9bb165e6a64415affcd0b3331628092195fa0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-15soc/intel/cannonlake: Enable Energy/Performance Bias controlAngel Pons
Set POWER_CTL MSR bit 18 to enable Energy/Performance Bias control. TEST=Boot and verify EPB is enabled in coreboot log: cpu: energy policy set to 6 Change-Id: Ibd1db77b5b63cb6e2b0ad9d2f79caa2f3b576ead Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-15soc/qualcomm/sc7280: Enable compression of SHRMShelley Chen
The SHRM region needs to be 4 byte aligned, which make enabling compression slightly more complicated. We need to map it to cached memory before loading it and flushing to memory (in aligned chunks) then remapping the address space back to device memory before beginning execution of the SHRM region. Also, did some cleanup in this file based on comments in CB:49392. BUG=b:182963902 BRANCH=None TEST=Make sure we can still boot to kernel on herobrine Change-Id: Iaad8a8a02abe40bd01766d94ef0b61aac7671936 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-15soc/amd/cezanne,picasso/uart: implement read_resourceFelix Held
Implement the read_resources function for the UART devices so that the resource allocator knows about their fixed MMIO resources when enabled. TEST=UART still works on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4ffddee3f5f4281aca98ddfcefa639dfb7a38dae Reviewed-on: https://review.coreboot.org/c/coreboot/+/58306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15Revert "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: This CL did not handle Intel GPIO correctly. We need to add GPIO_EC_IN_RW into early_gpio_table for platforms using Intel SoC. Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: Iaeb1bf598047160f01e33ad0d9d004cad59e3f75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57951 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15soc/amd/common/block/lpc: simplify eSPI part of MakefileFelix Held
Since espi_util.c is also built in the case of verstage on PSP, we can just add it to all stages. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I65e07c356aac73c5de2d9ce5582434872a223c19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/intel/alderlake: fix NULL pointer dereferenceSelma Bensaid
microcode_file could be NULL and passed to get_microcode_size, this was detected by klocwork scan. Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: Ibb3d49ab18d8c26bbf5d6bf6bdf1bf91137f5736 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-15soc/intel/broadwell/pcie.c: Simplify AND-maskAngel Pons
There's no need to mask out bit 11, as it is unconditionally set. For some reason, this changes the resulting coreboot image. Also simplify another PCI operation with a redundant AND-mask. Change-Id: I5492acd5f9c61db83a07ce7c1f6b887768c3eadf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-14soc/intel/common/cse: Reorganize firmware update checks for CSE LiteFurquan Shaikh
`cse_fw_update()` is currently checking whether an update is required by comparing versions once and then again comparing versions later in `cse_is_downgrade_instance()` to determine if the update is an upgrade or downgrade. Additionally, if CSE RW partition is corrupt (determined based on `cse_is_rw_bp_sign_valid()`), `cse_is_downgrade_instance()` ends up using the corrupted version information to determine if it is a downgrade instance. This change reorganizes the firmware update checks to return different status values: 1. CSE_UPDATE_NOT_REQUIRED: No update required. Versions match. 2. CSE_UPDATE_UPGRADE: Update required and it is an upgrade. 3. CSE_UPDATE_DOWNGRADE: Update required and it is a downgrade (requires data clear). 4. CSE_UPDATE_CORRUPTED: `cse_is_rw_bp_sign_valid()` failed and hence requires data clear. 5. CSE_UPDATE_METADATA_ERROR: Unable to read CSE metadata from CBFS. This change also prepares the file for follow up changes which completely drop cse_rw_metadata structure. BUG=b:184892226 Change-Id: Iabecab8e373e65a11ba7fe1bfc125467571a0588 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58157 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-14soc/amd/common/acpi/upep: Add Low Power State Entry NotificationsKarthikeyan Ramasubramanian
Add support to handle S0ix entry and exit notifications by adding the corresponding _DSM functions. The function indices are chosen based on the Modern Standby BIOS Implementation Guide 56358 Rev. 1.04. Inside the notification functions perform any mainboard specific S0ix entry and exit actions. BUG=b:195748540 TEST=Build and boot to OS in Guybrush. Ensure that the notification functions are invoked on S0ix entry and exit. Perform suspend/resume cycles for multiple iterations. Change-Id: I3014551f6e281d466628559453a0141a3dd6abad Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58274 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-13src/soc/amd/cezanne: enable clock gatingJulian Schroeder
Enabling clock gating for CGPLL to lower power consumption in S3 and S0i3 states. See also: Cezanne PPR chapter 7, rev 3.03. BUG=b:185273565 TEST=iotools mmio_read32 0xfed80e2c and 0e30 show clk gating enabled and suspend_stress_test works. Change-Id: I33cbdeec62e49db90b680da37e5028df03a9c015 Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/intel/common/tcss: Optimize USB-C DP flow and code structureDerek Huang
HPD event may not be ready when configuring TCSS mux for DP, check if any DP device is connected and wait for HPD ready before TCSS configuration. Remove unnecessary dependency on mainboard functions, use generic interface which provides USB-C mux operations. BUG=b:192947843 TEST=select ENABLE_TCSS_DISPLAY_DETECTION in Kconfig.name for Brya. Build coreboot and update your Brya. Boot Brya with USB-C display connected, you should find `HPD ready after %lu ms` and `Port C%zd is configured to DP mode!` in coreboot log. Display should show screen in developer mode or recovery mode. Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Ia7e6dd952d3183ecb76de6d4887ee573ef89bb50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-13soc/intel: drop P_BLK supportMichael Niewöhner
P_BLK is legacy and superseded by ACPI _CST. Also, the implementation for most platforms in soc/intel is broken. Thus, drop it. For APL the IO redirection is kept since it's used as replacement for the broken MWAIT instructions. Change-Id: I489aa7886dd9a4c1e6c12542bc2a1feba245ec36 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-13soc/amd/common/block/spi: Support fast speed overrideKarthikeyan Ramasubramanian
Add support to override SPI ROM fast speed based on board version. This will allow boards to start at lower speeds during bringup and then switch to higher speeds after assessing the signal integrity. Also implement a default no-op override. BUG=None TEST=Build and boot to OS in Guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ia8ff3b3bdb53fee142527ae63aa7785945909304 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/common: Add support to read and set SPI speeds from verstageKarthikeyan Ramasubramanian
Currently all SPI speed configurations are done through EFS at build time. There is a need to apply SPI speed overrides at run-time - eg. based on board version after assessing the signal integrity. This override configuration can be carried out by PSP verstage and bootblock. Export the APIs to set and read SPI speeds from both PSP verstage and bootblock. BUG=None TEST=Build and boot to OS in guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I281531e506b56173471b918c746f58d1ad97162c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 17:44:15 +0000