Age | Commit message (Collapse) | Author |
|
It might be benefical to have utils for domain resource window
creation so that the correct IORESOURCE flags used could be
guaranteed.
TEST=Build and boot on intel/archercity CRB
TEST=Build on intel/avenuecity CRB
Change-Id: I1e90512a48ab002a1c1d5031585ddadaac63673e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
get_cxl_mode() is the interface for CXL mode config check used by
SoC codes. It could be implemented by mechanisms outside of the
SoC codes, e.g. board codes or OCP VPD driver.
Move the interface declaration out of soc/util.h to a dedicated
header, a.k.a., soc/config.h, so that the implementation codes do
not need to include soc/util.h where there are lots of irrelevant
definitions. Future SoC config check interfaces could be added
to soc/config.h as well.
The default weak implementation is moved out of util.c to
config.c as well.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ia0302b0d3fd93c49e1d6f64e8159f59d50f33e20
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82293
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8d4500edaa0739921831a3b04131046599c35a87
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Some proximity domain info are type specifics, e.g. base/size/dev
are effective for PD_TYPE_GENERIC_INITIATOR, but not for
PD_TYPE_PROCESSOR. Dump info per their type.
TEST=Build and boot on intel/archercity
Change-Id: I7e722a0577bba954efba3e91cc152c758c001d68
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Move proximity domain setting up to ahead of attach_iio_stacks()
so that proximity domain info could be ready before
attach_iio_stacks()/create_xeonsp_domains().
For example in SPR, is_iio_cxl_stack_res() refers to proximity
domain info, and it will be called in create_xeonsp_domains().
TEST=Build and boot on intel/archercity
No significant boot log difference except for proximity domain
dump info display are moved ahead (with correct contents).
Change-Id: I594f0ec0c23e3b62c3bdd917ebf6e45be6e4069e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82267
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
psys_pl2_watts is configured in SoC node of devicetree.
Value represents Watts.
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST=emerge-ovis coreboot
Change-Id: I9c4d62b93fc751db9e0ea04e475acb8861a844f8
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add IIO configuration utils shared in GNR boards to handle the
complex IIO configuration settings.
Change-Id: If7146761db6f73a0c4b0d31b010c0d30a42bf690
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
coreboot GNR (Granite Rapids) is a FSP 2.4 based, no-PCH, single
IO-APIC Xeon-SP platform. The same set of codes is also used
for SRF (Sierra Forest) SoC.
This patch initially sets the code set up as a build target with
Granite Rapids N-1 FSP (src/vc/intel/fsp/fsp2_0/graniterapids).
1. All register definitions are forked from SPR (Sapphire Rapids)
and EBG (Emmitsburg PCH)'s codes are reused.
2. src/soc/intel/xeon_sp/chip_gen6.c is newly added as chip
common codes for 6th Gen Xeon-SP SoC (Granite Rapids) and later.
Change-Id: I3084e1b5abf25d8d9504bebeaed2a15b916ed56b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add PCI ID for RPL tracehub and update the PCI ID in the
pci_device_ids[] in tracehub.c.
Reference:
Raptor Lake External Design Specification Volume 1 (640555)
BUG=None
TEST=Verified on brox
Change-Id: I5d5c6c8ff44bcb5a7bbbd3e27a1577c169ecd6a9
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Reference:
Panther Lake External Design Specification Volume 0.51 (815002)
BUG=b:329787286
TEST=verified on Panther Lake Simics Platform.
Change-Id: I941d6e1c8a697234b8e64a2523e60587897d7f7a
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81848
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib86df42c74474ab6d0bd389073c36ca0761748af
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Details:
- Add support for new Lunar Lake MCH ID 0x6410
- Add new CPU id 0xb06d1
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
TEST=Build, boot the system and verfiy MCH-ID prints in bootblock stage.
Below prints verified on Lunar Lake RVP board (lnlrvp).
[DEBUG] MCH: device id 6410 (rev 02) is LunarLake M
Change-Id: I976d7f269485633d835d204afa224736d71baaa8
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81847
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Without this patch, ACPI SSDT does not supports and lists CNVW.
With this patch, verified "CNVW" in ACPI SSDT listing.
Scope (\_SB.PCI0)
{
Device (CNVW)
{
Name (_ADR, 0x0000000000140003) // _ADR: Address
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
BUG=b:329787286
TEST=verified on Lunar Lake RVP board (lnlrvp).
Change-Id: I5a0a3fbc9f43a6a573e33fcf3901055e10faaed1
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81846
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently EOP message is sent to CSE late in the boot flow. Instead send
it asynchronously to save ~10 ms in boot time.
BUG=b:337330958
TEST=Build Brox BIOS Image and boot to OS.
Change-Id: I229d16a5dcd072958db3f59a9c364bf7508b3047
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
mp_init_with_smm returns cb_err type, where 0 means success and
negative values represent error (see cb_err.h).
However, failure checks in form of "ret < 0" is not
straightforward. Use "ret != CB_SUCCESS" instead.
Change-Id: I7e57f2da0361f3109051e9a35b1cce81d559b261
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The original code uses TRE0-TRE3 register to determine whether or not
the TBT controller exists. However, there is a remap in fsp could confuse
the TRPx._STA.
Ex:
Disable TBT controller 0 on b:0 d:7 f:0
Enable TBT controller 1 on b:0 d:7 f:1
The FSP will do the remap and after the remap:
TBT controller 1 is on b:0 d:7 f:0
TBT controller 0 is on b:0 d:7 f:1
This is becuase func 0 must exist per pci spec.
However, the TRE0-TRE3 will not be remapped so that the ACPI
TRPx._STA method could be confused.
In such scenario, TRP0._STA will return 0x0, TRP1._STA will return
0xf which is wrong because TBT controller 1 is now at b:0 d:7 f:0
TEST=tested on rex and _TRPx._STA returns correctly. TBT function OK
Change-Id: I54f2ea99cd1ec73dd0b71a6ba738aa927b0ae80f
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The TBT PCIe devicetree settings are not remapped properly when
TBT PCIe port 0 is disabled.
This code refer SHA:58bc5d937 to remap the PCIe devtree settings
properly in case of TBT PCIe port0 is disabled,
TEST=Tested on screebo and found "Remapping PCIe Root Port #2 msg"
showed up in coreboot log
Change-Id: I7c7549ddf8ccdd67d7af7c69f51a84614cff9a03
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81841
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename different spd_raw_data[] for DDR3 and DDR4.
This is to solve the conflict when we include both "ddr3.h" and ddr4.h"
for example here: src/device/dram/spd.c.
Otherwise, it won't compile as DDR3 and DDR4 have different
spd_raw_data[] size.
Change-Id: I46597fe82790410fbb53d60e04b7fdffb7b0094a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=Build and boot on intel/archercity CRB
Change-Id: Ied4921f7dc7e144e580d05d4f2262777aa59d895
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81566
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Build and boot on intel/archercity CRB
Change-Id: Iee2234a3055fe8a94ecbfc820e9ff9e981f8dff2
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When microcode is not found, intel_microcode_find() will output warning
and skip the update. Remove the duplicated warning in CPU codes.
TEST=Build and boot on intel/archercity CRB
Change-Id: I0264edc01e90186a7b77d57f9c147d3b73747437
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add comments to clarify the usage of logical core count instead of
physical core count.
TEST=Build and boot on intel/archercity CRB
Change-Id: I2bc94391f060cec9de91183021da03bc5c7438c0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82097
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Build and boot on intel/archercity CRB
Change-Id: I17b42331fa9b5f59d1fb1d66b9155c57e258357b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82191
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update a simple algorithm to cover some basic case for proximity
domain distance handling. In the same time, the local variable
usage of fill_pds() is optimized.
TEST=Build and boot on intel/archercity CRB
ACPI SRAT, SLIT and DMAR (Remapping Hardware Static Affinity) are
generated correctly for 2S system.
Change-Id: I2b666dc2a140d1bb1fdff9bc7b835d5cf5b4bbc5
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81442
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce a new Kconfig to enable PD controller to PMC mux
configuration. Selecting this config enables direct communication from
PDC to PMC. TCSS_HAS_USBC_OPS enables USB-C operations via the EC. When
SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION is selected, disable
TCSS_HAS_USBC_OPS to avoid sending PMC commands from AP/EC.
BUG=b:332383540
TEST=USB3 plugged during G3, is detected after system boots from G3.
Cq-Depend: chromium:5484387
Cq-Depend: chrome-internal:7106592
Change-Id: Ieeb503393418cdad43384be39ac49c93ba91e4db
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82077
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
soc/intel/xeon_sp/acpi/*.asl are actually used only by SKX and CPX
platforms and not forward compatible to later SoC generations.
Move them to soc/intel/xeon_sp/acpi/gen1/ for clean maintenance.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ib060b123ab0fd761f00d9a0573e9b73d600ea9ef
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82033
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current fast_spi code uses memcpy for rw. The SPI flash read/write
has 4 byte limit, due to which the current 64 bit memcpy doesn't work.
Hence update rw ops to use read32p/write32p.
BUG=b:242829490
TEST=Verified MRC cache working on MTL 64-bit, future 64 bit platforms
and RPL(brox/skolas) 32-bit platforms.
Change-Id: I317c7160bf192dd2aeacebf6029a809bc97f3420
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SOC_INTEL_PCIE_64BIT_ALLOC is not used.
Change-Id: I1ef52104ef1d883330b800215cb4d0475092d8fe
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
TEST=Build and boot on intel/archercity CRB
Change-Id: I06e5ff635c37253b1c8f151b62f696ff7e5e22ef
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82110
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Integrated Boot Logic (IBL) codes doesn't support bootloader
controlled Primary-to-Sideband Bridge (P2SB) hidden and unhidden.
Hence, dynamically read IBL HPET/IOAPIC Bus:Device.Function (BDF)
by bootloader is not supported, because when P2SB is hidden the
register access is denied.
TEST=Build and boot on intel/archercity CRB
TEST=Build on intel/avenuecity CRB
TEST=Build on intel/beechnutcity CRB
Change-Id: I3975cb00e215c4984c63bb8510e8aef7d4cc85a4
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81321
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configuration variable implementation (VPD, et al) is regarded to
be mainboard specific and should not be bounded to SoC codes.
This patch moves the VPD based settings (FSP log level, et al)
from SoC codes to mainboard codes.
TEST=Build and boot on intel/archercity CRB with no significant log
differences
Change-Id: Iefea72eec6e52f8d1ae2d10e1edbabdebf4dff91
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82090
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Configuration variable implementation (VPD, et al) is regarded to
be mainboard specific and should not be bounded to SoC codes.
Add get_cxl_mode so that SoC codes do not need to get this
configuration from VPD any more.
TEST=Build and boot on intel/archercity CRB with no significant log
differences
Change-Id: I1e08e92ad769112d7e570ee12cf973451a3befc0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clean up by using is_devfn_enabled().
Change-Id: I9ea3d8b1b18e84a75a81a7e926d2c638766bb493
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82120
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up by using is_devfn_enabled().
Change-Id: I9a4984a096e72025e161bf117b70a7c59f2bb094
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82118
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In NUMA architecture, all devices (cpu, memory and PCI device)
belong to specific proximity domain. Add utils to map device
instance to their proximity domain.
Proximity domain ID is the index assigned at the creation of
proximity domains. There is no hard relationship between proximity
domain ID and the device identities (e.g. socket ID). Hence we
need the map utils to explicitly link them.
For now the Sub-NUMA config isn't taken into account.
TEST=Build and boot on intel/archercity CRB
Change-Id: Icd14a98823491ccfc38473e44a26dddfbbcaa7c0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81440
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Build and boot on intel/archercity CRB
Change-Id: I84f07c16e24e441a885144df8c805f1310acae29
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81439
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total
SPD size of 512 bytes. Set this as the default and remove the setting
from mainboard Kconfigs.
Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As described in Intel document 336464 (8th gen S series datasheet volume
1), the CPU's 4 eDP lanes can be bifurcated, so that DDI-A (eDP) ends up
with 2 lanes, and DDI-E (DP, typically used for VGA) has the remaining 2
lanes. This lets mainboards provide a VGA output without sacrificing one
of the main 4-lane DDIs. Newer platforms seem to be lacking this.
However, the way this is structured in coreboot does not allow boards to
choose whether bifurcation should be enabled. Most boards in the tree do
not use DDI-E (it doesn't exist on mobile platforms), but there are some
boards (e.g. hp/280_g2) that use DDI-E and a DP-to-VGA converter chip to
provide a VGA output.
Replace `SOC_INTEL_CONFIGURE_DDI_A_4_LANES` with two new Kconfig options
to allow boards to decide. Use `SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION` to
specify whether a platform supports DDI-A bifurcation at all (do nothing
otherwise, maintaining the original code's behaviour). If bifurcation is
supported, the `SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION` is used to clear
or set the `DDI_A_4_LANES` bit in the `DDI_BUF_CTL_A` register.
Change-Id: I516538db77509209d371f3f49c920476e06b052f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82113
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found in a Clevo V560TU with Intel Core Ultra 155H
Change-Id: I0f10808fd0e2d9c122743615fbce656c6d2447cc
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82071
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In a server platform many silicon specific register lock operations
are by default in FSP space. CHIPSET_LOCKDOWN_FSP provides an option
to make sure the codes could be used out-of-box to build products.
Change-Id: I8efcc1f27446be8e35f51e2568c4af6f8165486b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82081
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Add the graphics device IDs for Twinlake platform based on
Platform External Design Specification.
Document ID: 645548
BUG=b:326901448
TEST=Build tivviks and verify the IGD IDs.
Change-Id: Ide008d5c5302bd589784bc917a2610c42a0fdee4
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82038
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch introduces fsp print helper macros to print
`efi_return_status_t' with the appropriate format. These macros
are now used for fsp debug prints with return status
efi_return_status_t is defined as UINT64 or UNIT32 based on the
selected architecture
BUG=b:329034258
TEST=Verified on Meteor Lake board (Rex)
Change-Id: If6342c4d40c76b702351070e424797c21138a4a9
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81630
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the input device pointer pointing to a domain device,
dev_get_domain returns the input device itself.
TEST=Build and boot on intel/archercity CRB
Change-Id: I3a278a8f573de95406ee256fba17767def4ad75d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In coreboot, domain indicates hardware units that provide/group
resource windows, For Xeon-SP, domains are PCIe compatible and
further function in many aspects, e.g. PCIe, CXL, IOAT, UBOX.
Rename dev_get_pci_domain to dev_get_domain to align with coreboot
concept and distinguish from Xeon-SP concept.
TEST=Build and boot on intel/archercity CRB
Change-Id: I51b18b30fb41038869ea1384b01091da31a895b9
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Allows to use the function in more places that expect the
struct device to be readonly.
TEST=Build and boot on intel/archercity CRB
Change-Id: Iac04fe6931a43070f6638b399adbff2ce64829c9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81275
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Lynx Point PCH reference code version 1.9.1 programs the larger L1 exit
latency when ASPM is enabled. Document 535127 (BDW PCH-LP BS) also does
the same. Correct the condition accordingly. On Lynx Point, also remove
a now-redundant write to the LCAP register (offset 0x4c).
Change-Id: I2166bd5b5504ed97adcd2db0a802da02da4c91f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57501
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the official microcode updates from intel-microcode submodule
by default. Downstream users can still decide to use their own files.
Change-Id: I58121cc2ca7699d3d26581d7d5875ec74deeeb93
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81637
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Lynxpoint has them, so add them on Broadwell as well.
Change-Id: Iaa3e8044090262a64e58062ec4b116976978ce55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Lynx Point PCH reference code version 1.9.1 checks bit 29 to detect ASPM
on PCH-LP root port #6, not bit 28. Document 535127 (BDW PCH-LP BS) also
uses bit 29 for root port #6. Correct the bit used in the check, as well
as the surrounding comments.
Change-Id: Ie4bd7cbbfc151762f29eab1326567f987b25ab19
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57500
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For current generation SPR/EMR you need to add at least
3 different microcodes having about 2MiB of size in total.
This doesn't work with the hardcoded offset and size in Kconfig.
Since it's loaded through FIT there's no need to pass it to FSP-T.
Drop the hardcoded locations and place it somewhere in CBFS.
Test: Booted on ibm/sbp1 with microcode confirmed loaded in
bootblock on BSP. All the APs also have the correct
microcode version loaded.
TEST= Build and boot on intel/archercity CRB
'cat /proc/cpuinfo | grep microcode' result doesn't change
before and after this patch.
Change-Id: Iaa7007c2b11a860c9c664a7e753440bad7fe858e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81635
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Compress FSP-S to save some space in CBFS.
Reduces the size of debug FSP-S by about 25%.
Test: Still boots on ibm/sbp1.
TEST= Build and boot on intel/archercity CRB.
Change-Id: I6248e7cabbce45f6c2fedfab34f328309f87e868
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81634
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
WildcatPoint-LP BIOS spec lists them, and are the same for Lynxpoint.
Change-Id: Iba28c1591affafeb37097084c2fa58128974bd00
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Integer division in C truncates toward zero. When the dividend and the
divisor are positive, one can add half of the divisor to the dividend to
round the division result towards the closest integer. We already have a
macro in commonlib to do just that, so put it to good use.
Tested with BUILD_TIMELESS=1, coreboot images for the Asus P8Z77-V LX2
and the Asrock B85M Pro4 do not change.
Change-Id: I251af82da15049a3a2aa6ea712ae8c9fe859caf6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52651
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/pci.h> is supposed to provide <device/pci_{def,type}.h>
Change-Id: Ia645b8dba8c688187a25916f508593f333821f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81831
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/device.h> is supposed to provide <device/{path,resource}.h>
Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If8be8dc26f2729f55dc6716e6d01e2b801d79e44
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Ic690a7543f8a1e072650917d7a1e9e3b9dc371a3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: Ib454330c5f584760c47ff0127a720cec5773b922
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: Ie7e36cfa5a09d94bb58f12f9bd262255a630424c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81819
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
IoT variants of the RaptorLake FSP support the `PchPciePowerGating` and
`PchPcieClockGating` UPDs, so, remove the preprocessor check that only
enabled it for AlderLake FSPs.
Change-Id: I583a4b257b72f992fdb6390d00e187d04a749177
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81803
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Avoid calling `acpi_device_scope()` and `fast_spi_acpi_hid()` if the
result won't be used. Also, reorder a condition so that compile-time
constants appear first, so as to help the compiler optimize it out.
Change-Id: I42ce55c2978ad9c593c359c5decd5842fb3a97a1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I0e216cbc4acf9571c65c345a1764e74485f89438
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81818
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MAINBOARD_USES_FSP2_0 selects PLATFORM_USES_FSP2_0 and
POSTCAR_STAGE which are used by all Xeon-SP platforms.
After the removal of MAINBOARD_USES_FSP2_0, PLATFORM_USES_FSP2_0
is implicitly selected by SoC Kconfigs in PLATFORM_USES_FSP2_X,
POSTCAR_STAGE is selected by XEON_SP_COMMON_BASE.
TEST=Build and boot on intel/archercity CRB
Change-Id: I45332d49dd21f9749fce458877777a4b783a1b11
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81783
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I40e2e5a786499abbe2fce63d6e0f1ac1e780ab51
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Ic7f6690786661e523292f7382df71ae4ad04d593
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Change-Id: I93e6989633b9ac1b2738b812e3f8b442ecfdcbf0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I265e427254ce9f735e65b0631c43f98bc778a34f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81812
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the soc_get_ioapic_info for platforms with IIO IO-APICs to
a separate file from src/soc/intel/xeon_sp/acpi.c.
TEST=Build intel/archerticy CRB
Change-Id: I59022b7685539491604724ef3b550da1cfd53f13
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This refactoring ensures bmp_load_logo() takes logo_size as an
argument, returning a valid logo_ptr only if logo_size is non-zero.
This prevents potential errors from mismatched size assumption.
BUG=b:242829490
TEST=google/rex0 builds successfully.
Change-Id: I14bc54670a67980ec93bc366b274832d1f959e50
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81618
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
unlock_pam_regions() is needed for SKX and CPX. Put the codes into
chip_gen1.c so that it could be shared among SoC generations.
After shared, unlock_pam_regions() is still called from SKX and
CPX SoC specific codes. SPR will also use chip_gen1.c, but it will
not call unlock_pam_regions().
TEST=Build and boot on intel/archercity CRB
Change-Id: Idbc7dc6dd22a1747a65543666fc714a0872e6b37
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Fast SPI code assumes only one SPI flash is present. The SPI flash
driver for older southbridges is able to detect multichip. See the
spi_is_multichip() in src/southbridge/intel/common/spi.c.
Some boards (e.g. Lenovo ThinkCentre M920 Tiny) still come with two
chips populated instead of one. With this change, both chips are probed,
and the correct total size is calculated. Otherwise, only the first one
was probed, which resulted in an error such as:
SF size 0x1000000 does not correspond to CONFIG_ROM_SIZE 0x1800000!!
Change-Id: I8d7449f9e1470dc234fe5ba5217d3ce4c142b49c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I42bb15b8534d16401cd06ff803a8425221c5f3c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Call into FSP-T using the protected mode wrapper
and enter long mode in FSP-T support assembly code.
TEST: Booted on ibm/sbp1 in long mode.
Change-Id: Id6b9780b06b4bfbb952e32091ffbf3d0014f2090
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
intel/common/block/acpi provides default soc_get_ioapic_info for
single IOAPIC model. Use the default soc_get_ioapic_info when
XEON_SP_HAVE_IIO_IOAPIC is not set. This model fits for SPR and
later.
TEST=Build and boot on intel/archercity CRB
Change-Id: I1ecfba49cd9b4dfbb3f11d58d04d07ea1752a131
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently the SRAT table only exposes one proximity group as
it uses the LAPIC node_id, which is always initialized to 0.
Use CPUID leaf 0x1f or 0xb to gather the node ID and fill it
to make sure that at least one proximity group for every socket
is advertised.
For now the SNC config isn't taken into account.
Change-Id: Ia3ed1e5923aa18ca7619b32cde491fdb4da0fa0d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
unlock_pam_regions routes Programmable Attribute Map (PAM) access
to DRAM. In SPR, PAM routing to DRAM is covered by FSP. Move the
step to SoC specific codes.
TEST=intel/archercity CRB
Change-Id: I3fd1d806807449e6a4d9d4d2c8a47ce61ed53018
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
IBL (Integrated Boot Logic) provides a subset of server
PCH logics for no-PCH solution. IBL is with limited features
and registers exposed, PCIe root ports/USB/SATA/LAN support are
removed.
Change-Id: I8f3d64a2dd3b79ec5a9e4306f40b012b00387259
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81314
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Granite Rapids (6th Gen Xeon-SP) FSP introduces UDS_STACK_RES/
UDS_SOCKET_RES and retires the usages of STACK_RES/
IIO_RESOURCE_INSTANCE. Make redinitions to make Xeon-SP common
codes to work for both 6th Gen before and later.
Change-Id: I28c948525cd6d7ac4b9c3fa67e3c99ec637ed38f
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81040
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The RPL FSP currently uses HECI commands to retrieve the chipset
initialization version because the MBP HOB creation is disabled
(SkipMbpHob=1). This has resulted in an approximate 150ms increase in
boot time. Investigations are ongoing to determine the cause of the
delay when using HECI commands. As an interim solution, this patch sets
SkipMbpHob=0, enabling the use of MBP HOB or acquiring the chipset
initialization version, which is expected to reduce the boot time.
BUG=b:328430167
TEST= Able to build,boot and collect boot time data of brya.
With this patch:
963:returning from FspMultiPhaseSiInit 1,337,481 (249,046)
Without this patch:
963:returning from FspMultiPhaseSiInit 1,496,268 (408,194)
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I8a99a57b644732074e41051d99e63576f1edd229
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
GraniteRapids (6th Gen Xeon-SP) FSP contains changes in IIO stack
descriptors impacting the way of coreboot's creation of domains.
Separates the codes as preparation for 6th Gen and later platforms.
Change-Id: Iab6acaa5e5c090c8d821bd7c2d3e0e0ad7486bdc
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I79b93b0ca446411e2a1feb65d00045e3be85ee8a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
With SMM holding page tables itself, we can consider SMM support stable
and safe enough for general use.
Also update the respective documentation.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifcf0a1a5097a2d7c064bb709ec0b09ebee13a47d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
When switching back and forth between 32 to 64 bit mode, for example to
call a 32-bits FSP or to call the payload, new page tables in the
respective stage will be linked.
The advantages of this approach are:
- No need to determine a good place for page tables in CBFS that does
not overlap.
- Works with non memory mapped flash (however all coreboot targets
currently do support this)
- If later stages can use their own page tables which fits better with
the vboot RO/RW flow
A disadvantage is that it increases the stage size. This could be
improved upon by using 1G pages and generating the pages at runtime.
Note: qemu cannot have the page tables in the RO boot medium and needs
to relocate them at runtime. This is why keeping the existing code with
page tables in CBFS is done for now.
TEST: Booted to payload on google/vilbox and qemu/q35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix compilation errors when compiled for x86_64.
Test: Booted on ibm/sbp1 to linux payload.
Change-Id: I2c5ed0339a9c2e9b088b16dbb4c19df98e796d65
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81280
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FSP2.4 and previous FSP versions have different FSP-T UPD
parameter settings.
Change-Id: I48384944ac69636cca2acd8169d3dd15f90362ec
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81313
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DDR support codes across generations are similar. Share the codes
to improve code reuse.
TEST=intel/archercity CRB
Change-Id: I237d561003671d70dfaaa9823a0cf16d6e1f50cf
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81219
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Return statement is not useful in void function.
Change-Id: Idb8e07f48043452b329d255fe457f00317c017ae
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81429
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds timestamp start/end entries around the eSOL
implementation to track the panel initialization time while rendering
the eSOL screen.
TEST=Able to build and boot google/omnigul.
555: started early sign-off life (eSOL) notification 643,694 (40)
556: finished early sign-off life (eSOL) notification 1,072,143 (428,449)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I51c04fc4bd2540b3f42e2f896178521d297ef246
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Move the XHCI code into soc/intel/xeon_sp/ebg where it belongs.
TEST=intel/archercity CRB
Change-Id: I2206ec5426a0f922cfce0e2d968e6806d349a6b2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Since there's no code using those defines drop them.
TEST=intel/archercity CRB
Change-Id: I507b08a62ebeae14a1e63f4340b0592605a32477
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81369
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Different SoC generations might have different FSP header files. It is
recommended to put these uncommon header files in soc_util.h so that
Xeon-SP codes refer to soc_util.h to include them in a clean way.
TEST=intel/archercity CRB
Change-Id: Icfc20921efe00bc69b0c16c665f65f5baae4c309
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81229
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ADL-N FSP uses 202111 Edk2. select UDK_202111_BINDING Kconfig for ADL-N
SoC.
BUG=b:296433836
TEST=Able to build and boot google/crassk.
Change-Id: If277ede4307515035389cd0e9d34c15cc80f278c
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80274
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds config-based guards for Usb4CmMode and CnviWifiCore UPDs, specific
to Twin Lake SoCs (SOC_INTEL_TWINLAKE).
Prevents compilation errors due to missing UPD definitions.
BUG=b:330654700
TEST=Able to build google/tivviks.
Change-Id: I6e0a9a7536df6295e23bf06003539e56bb98a311
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81376
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the last FSP submodule update for Elkhart Lake commit f8df905e7baf
("3rdparty/fsp: Update submodule to upstream master"), the binary name
was changed to FSP.fd.
Change-Id: Ibc87ea2744e971d58e9a402f7cf04ef3f316f3b8
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Drop RMRR entry for XHCI controller since it's not under BIOS control.
There's no USB-PS/2 emulation done in SMM, hence it's not needed.
TEST=intel/archercity CRB
Change-Id: I5afd68371d71a00988fe0f8a6045ec5ce2adc6a1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81297
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Let ACPI DSDT figure out by itself if a stack is enabled.
Allows to drop uncore_fill_ssdt() on all platforms.
TEST=intel/archercity CRB
Change-Id: Ib9051d608147f2de228509ff6b13871ca3183979
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81273
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
As of now coreboot only supported one PCI segment group and thus the
MMCONF size had to be limited to 256 buses on ibm/sbp1. Since the
default FSP doesn't allow to disable unused IIO stacks a patched
version had to be used. Those unused IIO stacks consume lots of PCI
bus ranges, leaving no free buses for the secondary side behind PCI
bridges. The IIO disable mechanism doesn't work after ACPI G3 exit
and thus requires multiple reboots when the previous state was G3.
Since coreboot now supports multi PCI segment groups enable 512
MMCONF buses on 4S platforms by default and drop the IIO stack
disable UPDs on ibm/sbp1. This allows to boot faster without the
need for a patched FSP.
The use of multiple PCI segment groups might prevent legacy software
from working properly, however the only board where multiple PCI
segment groups are used uses u-root as default payload.
TEST=Booted on ibm/sbp1 to ubuntu22.04 using two PCI segment groups.
TEST=intel/archercity CRB
Change-Id: I4e6e5eca1196d4ab50e43b4b58d24eca444ab519
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add PCI enumeration support by reading the PCIeSegment reported in the
FSP HOB and add it when creating the PCI domain for each stack.
The PCI enumeration will be able to scan the additional PCI segment
groups and properly handle those devices.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups enabled
to ubuntu 22.04.
TEST=intel/archercity CRB
Change-Id: I0ba5e426123234979d746d3bdfc1ddfbd71c3447
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79878
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For every PCI segment group generate a new SATC header.
Allows to generate proper ACPI code when multiple PCI segment
groups are enabled.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups.
Properly generates multiple SATC headers.
TEST=intel/archercity CRB
Change-Id: I93b8ee05a7e6798e034f7a5da2c6883f0ee7a0e5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|