summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya/variants
AgeCommit message (Collapse)Author
2022-08-03mb/google/brya/variants/agah: set tcc_offset to 3Tony Huang
Set tcc_offset value to 3 in devicetree for Thermal Control Circuit (TCC) activation feature. This value is suggested by Thermal team. BUG=b:240600260 TEST=emerge-draco coreboot verified by thermal team Change-Id: I3044643d52f1d6e883beb3ec87a77f32d086f46c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-02mb/google/brya/var/ghost: Enable AMP powerEric Lai
Follow latest schematic, GPP_A17 is used to enable AMP power. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=Check I2C scan can see the AMP return ACK. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ia6c52302a12ddec68303714ac07e96a65a8f8fb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-08-02mb/google/nissa/craask: Add eMMC DLL tuning valueSimon Yang
Configure eMMC DLL tuning values for Craask board. BUG=b:238985924 TEST="Use the value to boot on Nivviks and Craask successfully." Change-Id: I14f3e2329404cca94e14034d1fb52fcb99a2ddc9 Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66218 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-01mb/google/brya: Disable the Package C-state demotionZhixing Ma
Disabling the Package C-state demotion feature for brya baseboard as a work around to the S0ix issue and also this doesn't have any impact on the power and performance measured and verified by the PNP team. This feature will be enabled after its functionality is verified with no issues and also based on its impact on PNP. BUG=none BRANCH=firmware-brya-14505.B TEST=Boot and verified that S0ix issue is resolved. Signed-off-by: Zhixing Ma <zhixing.ma@intel.com> Change-Id: Id3941c8870d41b25488c8ac5d38534fa94664d4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-30mb/google/brask/variants/moli: Add DPTF setting in MoliRaihow Shi
DPTF Policy and temperature sensor values from thermal team. BUG=b:236294162 TEST=emerge-brask coreboot Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Iebcfb74c4bc719e6d8d8d9317435becd912eaf85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29mb/google/brya/var/ghost: Enable CS42L42 codecEric Lai
Add CS42L42 support in device tree. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=Check cs42l42 driver can probe successfully in kernel. cs42l42 i2c-10134242:00: Cirrus Logic CS42L42, Revision: B1 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I861f47c12f4cebb016a4cfbe225f97d34d55e233 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-29mb/google/brya/var/ghost: Update all I2C buses speed to fastEric Lai
Remove the parameter and set I2C bus speed to fast. Will fill the tuning value after real tuning. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Iba7fe4551959617ecfa49719c1124bf85d624c31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-29mb/google/brya: Create gaelin variantRaymond Chung
Create the gaelin variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:239514438 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_GAELIN Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Change-Id: I7f1ff8690c7c57f8960e004d0490d5cede8667f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-07-28mb/google/nissa/var/joxer: Correct i2c address for touchscreenMark Hsieh
set i2c address to 0x14 for Goodix touchscreen BUG=b:239180430 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I11a2d9c684bc511b3942f88f74a2495e796bc3c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-28mb/google/brya/var/agah: Modify GPP_A8 programmingTim Wawrzynczak
The EEs noticed this pin was misbehaving; it was accidentally set to a low output, but should be open-drain (NC). This patch fixes that. BUG=b:237837108 TEST=verified by EEs Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie76a951320c49b9fbc1f23b96f04c9f86ad44d42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-28mb/google/brya/var/agah: Modify GPP_F14 programmingTim Wawrzynczak
For some yet unknown reason, when this GPIO is locked, there is an interrupt storm for IRQ #9 apparently caused by GPE 0x66. GPP_F14 is set to GPE 0x64 on the ADL platform, so this doesn't quite make sense. This patch removes the lock and fixes this IRQ storm, but the root cause is not identified yet. BUG=b:236997604 TEST=`grep ' 9:' /proc/interrupts` shows a reasonable value now Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I3d1c66fac80a173798ae33e48b1776d9f4fb5eaa Reviewed-on: https://review.coreboot.org/c/coreboot/+/66201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-07-28mb/google/brya/var/agah: Optimize dGPU GCOFF entryTim Wawrzynczak
After staring at lots of scope shots, the EE has determined that a few modifications to the GCOFF sequence can be made: - Remove delay between PERST# assertion and GPU_ALLRAILS_PG deassertion - Remove delay after ramping down FBVDD This patch implements these minor changes. BUG=b:240199017 TEST=verified by EE Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7d492b3e65a231bc5f64fe9c3add60b5e72eb072 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-28mb/google/brya/var/agah: Update ASPM settings for dGPUTim Wawrzynczak
After some debugging, it has been determined that the ASPM L0s substate is functional, but there is still some problem with ASPM L1 substates, so this patch updates ASPM status for the dGPU from disabled to L0s only. BUG=b:240390998 TEST=tested with nvidia tools Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I584bdbf26eda20246034263446492bf4daf5f3b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-28mb/google/brya/var/anahera{4es}: Add H54G68CYRBX248 supportWisley Chen
Generate SPD id for hynix H54G68CYRBX248 BUG=b:239899929 BRANCH=firmware-brya-14505.B TEST=run part_id_gen to generate SPD id Change-Id: I96babe340678ca9b82b06d3193b93a7676f23fef Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28mb/google/brya/var/redrix{4es}: Add H54G68CYRBX248 supportWisley Chen
Generate SPD id for Hynix H54G68CYRBX248 BUG=b:239888704 BRANCH=firmware-brya-14505.B TEST=run part_id_gen to generate SPD id Change-Id: I9412b988bcdb0c744e016f3add6dacda8185d6db Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28mb/google/brya/var/ghost: Correct CNVi pinsEric Lai
GPP_F0 to GPP_F4 is for CNVi and should be NF1. GPP_F5 is for CNVi CLK_REQ, and should be NF3 CRF_XTAL_CLKREQ. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=CNVi wifi can get probed in kernel. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ice3fde3a457f6f5c058c0a7d3ca2e63775bda96c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
2022-07-27mb/google/brya/crota: Remove MAC address passthru supportFranklin Lin
ChromeOS connection manager (shill) already has support for dock MAC address passthrough, therefore remove the code to pass a dock's MAC address in ACPI. BUG=b:235045188 TEST=build coreboot Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com> Change-Id: I78320a7c6b0fd5392e24b63bff234229a3f4b9bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/66040 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-27mb/google/brya/var/ghost: Update memory DQ mapEric Lai
Follow latest schematic 6/27 to update the DQ map. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I8d0de04a001cab53a245185707ebc9da7a501ec4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66122 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-27mb/google/nissa/var/craask: Add DPTF passive and critical policiesTyler Wang
Add critical, passive policy, and pl values from thermal team. BUG=b:239495499 TEST=Build and test on MB, system can boot to OS. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I8beb3b57ff56c6fe413bb0e3dd43d693aee08e36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66125 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-27mb/google/nissa/var/pujjo: Enable PCIe port 4 for WLANLeo Chou
Pujjo support WLAN device, enable PCIe port 4 for WLAN device BUG=b:239899932 TEST=Build and boot on pujjo Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: Ic8b7240941cf87a4f27963d50fffe28875114a81 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66073 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-26mb/google/brask/var/kuldax: correct Type-A USB3 port0/1 tx_de_empDavid Wu
1. Set Type-A USB3 port0/1 tx_de_emp to 0x2B to fix the USB3 Gen2 RX signal integrity issue. 2. Disable unused USB port. BUG=b:238230292 TEST=build FW and check Type-A USB3 port0/port1 RX pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8356ca30a965e5774a1556c5cb81e1586c55496c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-26mb/google/nissa/var/joxer: Configure descriptor for eMMC or UFSReka Norman
Joxer will have both eMMC and UFS SKUs, which require different settings in the descriptor. So update the descriptor at run-time based on fw_config. By default, the descriptor is configured for UFS. This configuration still boots fine on eMMC SKUs, it just might cause problems with S0ix. This is a temporary workaround. It will be removed once we've implemented a proper solution for configuring the descriptor differently for different SKUs. BUG=b:238234376 TEST=Make an identical change for nivviks. On both nivviks (eMMC) and nirwen (UFS), check that it boots and that the logs show the descriptor being configured as expected. Change-Id: I14232eb773936f2ecd183687208d332136935601 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-25mb/google/nissa/var/pujjo: Add new supported memory partLeo Chou
Add pujjo new supported memory parts in mem_parts_used.txt. Generate SPD id for this part. Micron MT62F1G32D4DR-031 WT:B BUG=b:239776504 TEST=Use part_id_gen to generate related settings Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I95eb194ecbd5d39f66eb566132e75af056899325 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66039 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-23mb/google/brya/var/skolas4es: Correct _PLD valuesNick Vaccaro
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C2 | | A0 C0 | MLB DB | C1 | | +----------------+ BUG=b:216490477 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I96202b9ac9586975e960d6577d279c995c67f34e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66031 Reviewed-by: Won Chung <wonchung@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-23mb/google/nissa/var/xivu: Disable WFC and pen garage based on fw_configIan Feng
Use fw_config Bit 0 and Bit 1 to control: Bit 0 = 0 --> enable WFC Bit 0 = 1 --> disable WFC Bit 1 = 0 --> enable pen garage wake Bit 1 = 1 --> disable pen garage wake BUG=b:238045498 TEST=emerge-nissa coreboot chromeos-bootimage Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I85bc4753bfd16fd460286aa2b3bb5f3341049f61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-22mb/google/brya/var/skolas4es: add WFC definitions to fw_configNick Vaccaro
Reserve bits 15 and 16 in the fw_config to be used to specify WFC population status. Possible values for field WFC bits include: option WFC_ABSENT 0 option_WFC_MIPI_OVTI5675 1 option WFC_MIPI_OVTI8856 2 BUG=b:239613517 BRANCH=firmware-brya-14505.B TEST='emerge-brya coreboot' and make sure it compiles successfully. Change-Id: If797b79f0d094816eeb3df7bfded06e92e4e6a32 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-22Revert "mb/google/brya/var/kinox: Configure TDC current"Dtrain Hsu
This reverts commit 58f68fb0cb8e9824256a115d1ebdc840c281e987. Reason for revert: ODM thermal team request that change IA/GT TDC current back to 20A. BUG=b:237230877 TEST=Build and boot to Chrome OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I6a5cfdc18afb6fe43a3d630e5fa3d77c19640fc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.corp-partner.google.com> Reviewed-by: Vinay Kumar <vinay.kumar@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
2022-07-22mb/google/brya/var/ghost: Split ghost4adl into 3 variantsJack Rosenthal
We plan to make 3 firmwares which differ only by Kconfig options and can share a common variant directory. ghost4adl: Board with an ADL chip. ghost4es: Board near identical but has RPL-ES chip. ghost: Will have final RPL silicon. Since they will only differ by Kconfig options and Intel binary blobs, let's not duplicate the variant directory but instead share it in common. BUG=b:239456576 BRANCH=firmware-brya-14505.B TEST="make menuconfig", verify layout of board selection Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I94f2048bbe6675a807f8eba986a1ded0a4167733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-22mb/google/brask/variants/moli: set customized_leds for RTL8111KRaihow Shi
Follow the LED modification request in ADL_Moli_SC_MB_2022_0601.pdf and set the customized_leds to 0x0482 based on 7.4 Customizable LED Configuration in "REALTEK+RTL8111K-CG+SPEC+0116" for RTL8111K in moli. BUG=b:218985167 TEST=emerge-brask coreboot and check RTL8111K LED behaviour Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Ia154d15ecf14b32a4d589abf27b9573693339a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65958 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/brya/var/brya0: add WFC definitions to fw_configNick Vaccaro
Reserve bits 15 and 16 in the fw_config to be used to specify WFC population status. Possible values for field WFC bits include: option WFC_ABSENT 0 option_WFC_MIPI_OVTI5675 1 option WFC_MIPI_OVTI8856 2 BUG=b:239613517 BRANCH=firmware-brya-14505.B TEST='emerge-brya coreboot' and make sure it compiles successfully. Change-Id: I23bdaf7feaff2e6a4979c3da789ab877e6ac3af2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-20mb/google/brya/var/agah: Adjust I2C speedTony Huang
Adjust I2C speed for codec, TPM, touchpad. BUG=b:237691531 TEST=Built and verified adjusted I2C speed < 400KHz Change-Id: I203d137d61019235ddf38ef74607427db2a7e975 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-19mb/google/brya/var/skolas: fix comment for I2C connectionsEran Mitrani
For brya/skolas, I2C1 is cr50, and I2C3 is Touchscreen BUG=None BRANCH=firmware-brya-14505.B TEST=None Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I4058e0f33b2bb6227a0af92941ed4e2eb56ba542 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-19mb/google/brask/variants/moli: correct USB3 port2 tx_de_empRaihow Shi
Set USB3 port2 tx_de_emp 0x2B by "11th Gen Intel Core Processors for IoT Platforms EDS Addendum_rev1.6" then fix the USB3 port2 Gen2 RX failed. BUG=b:236661824 TEST=emerge-brask coreboot and check USB3 port2 RX pass Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I7a5add20f055a8d871c6b4f33734fb8a397cba76 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65848 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-16mb/google/brya/var/osiris: Add wifi sar tableDavid Wu
1. Add wifi sar table for osiris 2. Set EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG BUG=b:234951991 TEST=build FW and checked SAR table can load by WiFi driver. Cq-Depend: chrome-internal:4871098 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I301dce3229a24dd72b12b84d9eb7606abe10cbba Reviewed-on: https://review.coreboot.org/c/coreboot/+/65869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-07-16mb/google/brya/var/brya: fix comment for I2C connectionsEran Mitrani
For brya, I2C1 is cr50, and I2C3 is Touchscreen BUG=None BRANCH=firmware-brya-14505.B TEST=None Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: Id564d5ede43e745c607ddfd851ff03557d76ddec Reviewed-on: https://review.coreboot.org/c/coreboot/+/65793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-15mb/google/nissa/var/pujjo: Remove unsupport HDA device settingStanley Wu
Pujjo only support RTL1019 amp device, remove MX98360A device setting BUG=b:238716919 TEST=Build and boot on pujjo Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I92ba66e8656ea36511f88cf867f51ba95168592e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-15mb/google/brya/var/agah: Disable ASPM for dGPUTim Wawrzynczak
Since ASPM is not verified as fully functional yet, and the board is still in development, this patch disables ASPM for the dGPU. BUG=b:236676400 TEST=boot to OS in agah, lspci -vvv shows ASPM is disabled Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I525eeb18c57d45fd55335b63a59262066afc9567 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-07-14mb/google/nissa/var/joxer: Update Joxer config to latest schematicMark Hsieh
init overridetree.cb based on the latest schematic. BUG=b:237628218 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I22778cc2582abdc2e62d98c6b049a0fa4dd467e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-14mb/google/brya/var/ghost4adl: Add EC_IN_RW_ODEric Lai
Follow latest schematic to add EC_IN_RW_OD. BUG=b:238786599 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I701a940992895b2058b8ddfc444a2e7b7b9531ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/65806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-14mb/google/brya/var/ghost4adl: Add SSD power sequence and remove weakEric Lai
Add SSD power sequence and remove the redundant weak. BUG=b:238786597 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I0c1ce311d54fb92b27b17f50beda813fe66ad118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-14mb/google/brya/var/ghost4adl: Add module MT62F1G32D2DS-026 WT-BJack Rosenthal
Add module MT62F1G32D2DS-026 WT:B and assign RAM code. BUG=b:238674174 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I811e1bbb985efe4198928f30ff6396a5b4368856 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65796 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-14mb/google/brya/var/volmar: I2C timing fine tuneRen Kuo
Configure the I2C bus timing for all enabled I2C buses. BUG=b:237751906 TEST=Verify the build for volmar board and measure the freq is under 400KHz Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Iffa128146f5d8bec6dd3d5c2d1e7efd96895dc6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65604 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-14mb/google/brya/crota: Enable MAC address passthru supportFranklin Lin
Enable the support for providing a MAC address for a dock to use based on the VPD values set in the platform. BUG=b:235045188 TEST=tested on Brya by setting VPD values and observing the string returned by the AMAC() method: > vpd -i RO_VPD -s "dock_mac"="BB:BB:BB:BB:BB:BB" > echo 1 > /sys/module/acpi/parameters/aml_debug_output [acpi.aml_debug_output=1] ACPI Debug: "Found VPD KEY dock_mac = BB:BB:BB:BB:BB:BB" ACPI Debug: "MAC address returned from VPD: BB:BB:BB:BB:BB:BB" ACPI Debug: "AMAC = _AUXMAC_#BBBBBBBBBBBB#" Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com> Change-Id: I61b2a5e18bc17abeea0846f17e9be343e852c2b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65603 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-14mb/google/nissa/var/pujjo: Add WWAN power off sequenceStanley Wu
pujjo support FM101 WWAN, use wwan_power.asl to handle the power off sequence BUG=b:238281124 TEST=Build and boot on pujjo Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I53cd45c8030855c267d870d68d009c454350621e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-13mb/google/nissa/var/pujjo: Add WFC camera settingStanley Wu
Modify USB2.0 port[6] setting for WFC camera support BUG=b:235182560 TEST=Build and boot on pujjo Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I78dad102be2d915a251f6528eef07f2056001b0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65777 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13mb/google/nissa/var/craask: Move codec item to SSFCTyler Wang
Move audio codec item from fw_config to SSFC. BUG=b:238353613 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I361ef54cd2ee3e0a423ed5086184936d6f09e099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-13mb/google/nissa: Remove GPP_B11 PAD configurationHarsha B R
Remove the pad configuration for GPP_B11 as this is not used in Nereid/Nivviks BUG=b:227694137 Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I3a213ffece75b9a706b96dc142a7e35c8b5973f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-12mb/google/brya/var/agah: Disable thunderbolt interfaceTony Huang
Agah doesn't support TBT interface so disable it in devicetree, for fitimage configuration is at chrome-internal:4846869. BUG=b:224423318 TEST=Build and check DUT boots. Change-Id: I1eb43e86de5debf24ebde6eace14fe04bad5e5b1 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65699 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-11mb/google/brya/var/banshee: Update VR domain settingsFrank Wu
Update the VR domain settings based on the request of internal team. - IA ac_loadline from 2.3mOhms to 2.4mOhms. - IA dc_loadline from 2.3mOhms to 2.28mOhms. - GT ac_loadline from 3.2mOhms to 3.13mOhms. - GT dc_loadline from 3.2mOhms to 2.94mOhms. BUG=b:237044562 BRANCH=firmware-brya-14505.B TEST=FW_NAME=banshee emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I665665ab8e3bcd6d4643f8b954b86fad3ef78ccd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-09mb/google/brya/var/kinox: Override tdp pl1 valueDtrain Hsu
Override tdp pl1 value to 30W in CPU MSR. BUG=b:238268367 TEST=Boot to Chrome OS and check cpu log show "CPU PL1 = 30 Watts". Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ibbd5ecc4b87ede5a62799020c741e5bff2952144 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-08mb/google/brya/var/ghost4adl: Update GPIO tableJack Rosenthal
Based on comments on CL:65534, update the non-early GPIO table. These are cases where Arbitrage wasn't able to find a useful heuristic, or the memory straps, where Arbitrage sees them as NC in the schematic. BUG=b:234626939 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I6e00892243cd6af99dc1921ee3fc712f6cbb58c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65710 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-08mb/google/brya/var/ghost4adl: Add early GPIO tableJack Rosenthal
Customize brya baseboard early GPIO table to add mem straps for ghost4adl, change I2C bus for TPM to pins H6/H7, and remove pins which are not used on ghost4adl (E16, H13). BUG=b:234626939 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I126a66fc5d24fbefec99abf87862c55b50c5e398 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65534 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-08mb/google/brya/variants/felwinter: Add fw_config to control TBT PCIe RP0John Su
Use USB4 fw_config to enable TBT PCIe RP0. BUG=b:237619214, b:237623610 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ie3e51a0f30e0c9d20127c017436813d4ede95639 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65696 Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-08mb/google/nissa: Don't put WLAN into D3coldReka Norman
On nissa, WLAN should be a wake source, so don't put it into D3cold during suspend. BUG=b:233325709 TEST=Wake-on-WLAN works on nereid Change-Id: Iddd5fa8db05b85d2c799f679d664876109187d0c Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-08mb/google/nissa: Enable Cnvi BT Audio Offload featureV Sowmya
This patch enables Cnvi BT Audio Offload feature and also configures the virtual GPIO for CNVi Bluetooth I2S pads. BUG=b:233834597 TEST=Verified BT offload feature on Nivviks P1. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Iffbd08351d083d2b550f309994af931bceb257d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-08mb/google/nissa: Confiure the unused virtual Cnvi BT GPIOs to NCV Sowmya
Configure the unused virtual CNVi BT GPIOs to NC since we are using BT over USB mode for Nissa. BUG=b:233834597 TEST=Verified BT offload feature on Nivviks P1. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Id84823b9ad921ebd7ff773d6cce581563613745f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65669 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-08mb/google/nissa: Disable the Package C-state demotionV Sowmya
Disabling the Package C-state demotion feature for nissa baseboard as a work around to the S0ix issue and also this doesn't have any impact on the power and performance measured and verified by the PNP team. This feature will be enabled after its functionality is verified with no issues and also based on its impact on PNP. BUG=b:235005582 TEST=Boot and verify that S0ix issue is resolved. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I4d586b962c27b86ee75651dcd655bc0868504646 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65664 Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-07mb/google/brya/var/ghost4adl: Update the PCIE and USB settingEric Lai
Based on latest schematic to update the PCIE and USB setting. BUG=b:237659398 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I97989b7a8d9104379ffb0b454d7248d49855f680 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
2022-07-07mb/google/brya/var/crota: Add DPTF setting in CrotaJohnny Li
DPTF Policy and temperature sensor values from thermal team. BUG=b:237640264 TEST=USE="project_crota emerge-brya coreboot" and verify it builds without error. Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: I43340bd1acfe6ec2036ea80339dbf896615a456a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65563 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-07mb/google/brya/var/kinox: Enable SaGvDtrain Hsu
Enable SaGv support for Kinox BUG=b:238153479 TEST=Build and boot to Chrome OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Id4646f1621a414a1ec4e272c826b0baea2bb4e19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-07mb/google/brask/var/kuldax: modify ddi_ports_configDavid Wu
Modify ddi_ports_config based on schematic. DDI_PORT_A = DP DDI_PORT_B = HDMI DDI_PORT_1 = Type-C DP DDI_PORT_3 = HDMI BUG=b:237419696 TEST=Boot to Chrome OS and check all display port working Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I7c0458f0dbd4637b91af9e01664073e1f8a7a614 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-07mb/google/brya: Change GPP_F17 programmingTim Wawrzynczak
Currently the EC's MKBP interrupt line is programmed as dual-routed to both SCI and IOAPIC. The brya EC will pulse the MKBP GPIO and also send a host event when there is an MKBP event for host to service. This causes an extra SCI to be generated, and the kernel will respond to each MKBP event with an extra unnecessary host command. Changing the pad configuration for the MKBP GPIO to APIC only fixes this issue. BUG=b:236706977 BRANCH=firmware-brya-14505.B TEST=excess GET_NEXT_EVENT host commands are gone from EC log Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic7dd596987f6d34c69d46674bdd07785235e2d4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65480 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-07mb/google/brya/var/agah: Update FBVDD power-down delayTim Wawrzynczak
The EEs have observed the ramp down delay on this signal in more detail and 40 ms can still meet the sequencing requirements. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I49ef801f7a3fd7945ded63da1399eaf57fd6aef0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-07mb/google/brya/var/agah: Remove variant_fill_ssdt()Tim Wawrzynczak
Since the GPU will be left powered on, the kernel has the opportunity to save context and this method to save the BARs is not required. BUG=b:233959099, b:236289930 TEST=build Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I19cf12426361a53e3672c1e05aa6d68d5dd6627c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-07mb/google/brya/var/kinox: Configure TDC currentDtrain Hsu
Configure TDC current for VR domains. +-----------+-------+-------+---------+-------------+----------+ | Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time | | |(mOhms)|(mOhms)| (A) | (A) | (msec) | +-----------+-------+-------+---------+-------------+----------+ | IA | 2.8 | 2.8 | 80 | 43 | 28000 | +-----------+-------+-------+---------+-------------+----------+ | GT | 3.2 | 3.2 | 40 | 23 | 28000 | +-----------+-------+-------+---------+-------------+----------+ - IA TDC current from 20A to 43A. - GT TDC current from 20A to 23A. - Others comes from 'commit c6d716694272 ("soc/intel/alderlake: Configure the SKU specific parameters for VR domains")' BUG=b:237230877 TEST=Build and boot to Chrome OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ie9cf8975309b57b4189e2b50f37bd61ac0105e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65659 Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-07mb/google/brya/var/kinox: Support DPTF oem_variablesDtrain Hsu
Enable DPTF oem_variables and override based on charger type. BUG=b:230803675 TEST=1. With 90W adapter, check ACPI object ODVX and oem_variable[0]=1 Name (ODVX, Package (0x06) { 0x00000001, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }) 2. With 65W adapter, check ACPI object ODVX and oem_variable[0]=0 Name (ODVX, Package (0x06) { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }) Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I78929ecbc9db56aa234b3f46c641d1f2f3b7cba8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-07mb/google/brya: Disable SaGV support for agah variantAnil Kumar
agah proto boards with i7 silicon face boot issues due to high power consumption during MRC training. This patch is a temporary WA to run in SAGV disabled mode while the thermal issue is being investigated. BUG=b:234402102 BRANCH=firmware-brya-14505.B TEST=Build CB image and boot on agah board. Change-Id: I431d233b23fb4f5c68117ea380fdec5646b88346 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65300 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-06mb/google/nissa/var/joxer: Add lock gpio pinsEric Lai
There is a new ground rule, variant should honor baseboard lock gpios. Thus, lock the gpio which is locked in baseboard. BUG=b:216671701 TEST=build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ia087b62904fd515bf73960a188b225f1d49197dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65646 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06mb/google/nissa/var/pujjo: Add lock gpio pinsEric Lai
There is a new ground rule, variant should honor baseboard lock gpios. Thus, lock the gpio which is locked in baseboard. BUG=b:216671701 TEST=build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I9f0fcf52b6b7d622e4fd182e007de6401856c7fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65645 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-05mb/google/brask/variants/moli: set tcc_offset to 0℃Raihow Shi
Set tcc_offset value to 0 in devicetree for Thermal Control Circuit (TCC) activation feature. This value is suggested by Thermal team. BUG=b:236294162 TEST=emerge-brask coreboot Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I8d4c631e07873923226683c8aa0cf36cb872e2d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-05mb/google/nissa: Lock gpio pins in fw config for nissa variantsEric Lai
There is a new ground rule, variant should honor baseboard lock gpios. Thus, lock the gpio which is locked in baseboard. BUG=b:216671701 TEST=check gpios are locked in pinctrl dump. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ieed2d40b0222d8c8c193e0590131f83a5d96add9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-05mb/google/nissa: Lock gpio pins for nissa variantsEric Lai
There is a new ground rule, variant should honor baseboard lock gpios. Thus, lock the gpio which is locked in baseboard. BUG=b:216671701 TEST=check gpios are locked in pinctrl dump. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I61931b0b2f1f936a672e72c98b83d66ba0059bf3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-04mb/google/brya: Disable PCH USB2 phy power gating for crotaTerry Chen
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for primus board. Please refer Intel doc#723158 for more information. BUG=b:237725329 TEST=Verify the build for crota board Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I6dde74c098ba57b7cd66ce7b9ee941b8961ad20c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Cyan Yang <cyan.yang@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-04mb/google/brya/var/kinox: Change HDMI port form DDPC to DDP2ericky_cheng
Modify GPIOs according to SOC_GPIO_Table_0629.xlsx. - GPP_A21 from TCP_DP1_CTRLCLK to NC - GPP_A22 from TCP_DP1_CTRLDATA to NC - GPP_E20 from NC to TCP_DP1_CTRLCLK (Native Function 1) - GPP_E21 from NC to TCP_DP1_CTRLDATA (Native Function 1) BUG=b:237468533 TEST=emerge-brask coreboot Change-Id: I8e7d343731efbfc04304d52a3493ab30b8a739b0 Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2022-07-04mb/google/nissa: Lock PLT_RST_L pinReka Norman
There is a requirement that the TPM RST signal cannot be asserted by software. On nissa this is PLT_RST_L, so lock this pin to prevent it being reconfigured as a GPIO. BUG=b:216671701 TEST=Try to change GPP_B13 from the kernel: $ echo 677 > /sys/class/gpio/export $ echo out > /sys/class/gpio/gpio677/direction $ echo 0 > /sys/class/gpio/gpio677/value $ echo 1 > /sys/class/gpio/gpio677/value GSC console doesn't show "PLT_RST_L ASSERTED" / "PLT_RST_L DEASSERTED" Change-Id: Id5d64b4b028e4f63c4acb05cd8632d0642866688 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65591 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-04mb/google/nissa/var/craask: Enable G2 touchscreenTyler Wang
Add G2 touchscreen support for craaskvin. BUG=b:235919755 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I7ade3ac1d135b8b21b09ef335ab7b30ae7a5e2c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-04mb/google/nissa/var/joxer: set up gpioMark Hsieh
Set the GPIO configuration of joxer BUG=b:237628218 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I1f7529342fc0800878f875d3641a2f93fbe6009a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-04mb/google/brask/var/kuldax: Add ACPI _PLD custom valuesDavid Wu
This patch uses ACPI _PLD macros to add custom values for USB ports. C0 A2 A3 +----------------+ | REAR | | | | | | | | FRONT | +----------------+ A1 A0 BUG=b:232419500 TEST=emerge-brask coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I5ada4e9b25102a9cfd3b02a2abcd956f6cbc5619 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Won Chung <wonchung@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-04treewide: Unify Google brandingJon Murphy
Branding changes to unify and update Chrome OS to ChromeOS (removing the space). This CL also includes changing Chromium OS to ChromiumOS as well. BUG=None TEST=N/A Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-07-04mb/google/brya/var/kano: Disable PCH USB2 phy power gatingDavid Wu
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for kano board. Please refer Intel doc#723158 for more information. BUG=None TEST=Verify the build for kano board Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I19430a68e1e847e71382781563200a4c88f37a59 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-07-04mb/google/brya/var/pujjo: Add GPIO tableleo.chou
Fill GPIO table for Pujjo. BUG=b:235774770 TEST=emerge-nissa coreboot Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I307b8460632f1feae9591200057c0e6471cbab24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65104 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-04mb/google/brya/var/ghost4adl: Update Type-C locationsCaveh Jalali
This updates the ACPI locations of Type-C ports. BUG=b:232806406 TEST=none Change-Id: Ia15e09a58c731a1364a994fadf8df39115fbe7c4 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-30mb/google/brya/var/gimble: Disable PCH USB2 phy power gatingMark Hsieh
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for primus board. Please refer Intel doc#723158 for more information. BUG=b:237421399 TEST=Verify the build for gimble board Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ie66c9679c985215ad7f1a5ae76560b839ea95702 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65474 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-30mb/google/nissa: Remove WLAN power sequencing workaroundReka Norman
CB:63368 added a workaround of driving EN_PP3300_WLAN_X low in bootblock to prevent a kernel crash on warm reboot. The crash has been fixed in the kernel, so remove the workaround. Kernel fix: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3463465/ BUG=b:225261075 TEST=Wifi works on nereid, warm reboot doesn't crash the kernel Change-Id: Idb5547e65ea934954326fcc740b14a83c939432e Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-30mb/google/nissa/var/xivu: Add gpio.c to ramstageIan Feng
Fixes a bug in Makefile.inc. BUG=b:236576117 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I2664df961a1fc0cd904a5e742face20c3fc8c3c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65450 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-29mb/google/brask/variants/moli: remove ASPM_DISABLE for I225VRaihow Shi
Disabling the ASPM for I225V will cause I225V suspend fail, so remove ASPM_DISABLE for I225v. BUG=b:235565637 TEST=emerge-brask coreboot and check LAN_I225V sku can boot into OS. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Id4505a713a3d92cb66c189cc2963111b6e90f092 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-29mb/google/brya/variants/nivviks: Enable DDR RFIM Policy for NivviksVidya Gopalakrishnan
DDR interfaces emit electromagnetic radiation which can couple to the antennas of various radios that are integrated in the system, and cause radio frequency interference (RFI). The DDR Radio Frequency Interference Mitigation (DDR RFIM) feature is primarily aimed at resolving narrowband RFI from DDR4/5 and LPDDR4/5 technologies for the Wi-Fi high and ultra-high bands (~5-7 GHz). This patch sets CnviDdrRfim UPD and enables CNVI DDR RFIM feature for Nivviks variant. Refer to Intel doc:640438 and doc:690608 for more details. BUG=b:237238786 BRANCH=None TEST=Build and boot Nivviks. - Verified that Wifi DDR RFIM Feature is enabled and DDR RFI table can be modified. Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Change-Id: Iea5c6e0c404efb8231321701ea9282347e01f75d Reviewed-on: https://review.coreboot.org/c/coreboot/+/65254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-06-29mb/google/nissa: Remove gpio lock for garage IRQ pinEric Lai
Kernel driver will en/disable the IRQ when suspend/resume. If lock the pin, driver can't change the status which causes the unexpected behavior. Device will wake when insert the pen. This is workaround until we figure out the correct setting for driver. BUG=b:233159811 TEST=Pen garage wake event work as expected. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ifc7b1e52a24c0e7bd54664d59870cb09536ef868 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65380 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-29mb/google/nissa: Change fw config override to pad_number table basedEric Lai
BUG=b:231690996 TEST=gpios are the same in kernel pinctrl dump. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I67a466fac478b2a3a682451174fbdcdd67816769 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-06-29mb/google/nissa/variant/pujjo: Update devicetree settingsStanley Wu
Based on schematic and gpio table of pujjo, generate overridetree.cb settings for pujjo. BUG=b:235182560 TEST=FW_NAME=pujjo emerge-nissa coreboot chromeos-bootimage Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I47b10d03798004d1f3e398070acb2cbad46900b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-06-28mb/google/nissa: Change pen garage wake to EV_ACT_DEASSERTEDEric Lai
Follow google stylus spec. The Stylus-Present GPIO MUST be a wake pin that interrupts the system in active operation when the stylus is removed. After confirmed with the owner, the expect behavior is only wake when eject the pen. BUG=b:233159811 TEST=EC wake event work as expected. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I7a82e5e8935c9ea27e923661f66809e9169bc86a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65379 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-28mb/google/nissa/var/xivu: Add MIPI WFC supportIan Feng
Add MIPI WFC based on schematics BUG=b:236576117, b:235446911 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I85bd2ba187729a55c00369b218ca0414e0162b9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-06-27mb/google/brya/var/kinox: Modify ddi_ports_configDtrain Hsu
Modify ddi_ports_config based on schematic Kinox_SCH_20220602.pdf. DDI_PORT_A = DP DDI_PORT_B = HDMI DDI_PORT_1 = Type-C DP DDI_PORT_2 = DP or HDMI BUG=b:233338341 TEST=Boot to Chrome OS and check all display port working Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ib2dbb34af1f85585b77638710d3799520c3f016f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-27mb/google/nissa: Apply gpio padbased table overrideEric Lai
In order to improve gpio merge mechanism. Change iteration override to padbased table override. And the following patch will change fw config override with ramstage gpio table override. BUG=b:231690996 TEST=check gpios in pinctrl are the same. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I3d0beabc2c185405cb0af31e5506b6df94e9522c Reviewed-on: https://review.coreboot.org/c/coreboot/+/64713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-24mb/google/brya/{var/agah,acpi}: Update GPU GCOFF sequence for power downTim Wawrzynczak
We have clarified the powerdown sequence with Nvidia, and the EEs have come up with this modified sequence which still meets the requirements from the hardware design guide. BUG=b:233959099 TEST=Verified by ODM and EE Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I37715165ab488f994c825fb9ff532ebf8d7f4cb0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-06-24mb/google/brya/var/osiris: Disable PCH USB2 phy power gatingDavid Wu
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for osiris board. Please refer Intel doc#723158 for more information. BUG=None TEST=Verify the build for osiris board Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia30a7b915df14c91a2526dca3e374436da286b7a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-06-24mb/google/nissa/var/xivu: Update overridetreeIan Feng
Update override devicetree based on schematics. BUG=b:236576117 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I2986ae6fd1f51efc6b9bb18ff2b7186357e55fcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-24mb/google/nissa/var/xivu: Update gpio settingsIan Feng
Configure GPIOs according to schematics. BUG=b:236576117 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I8c4347fcc975ed994261c7738e5ef811a12e4b0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/65288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-24mb/google/brya/var/crota: Modify some GPIO programmingTerry Chen
Base on bernadino 14 adl-p 20220531.pdf, configure GPIOs according to schematics. GPP_B2 => BYPASS_DET GPP_F19 => FP_USER_PRES_FP_L BUG=b:234384954 TEST= USE="project_crota" emerge-brya coreboot Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: Ic2e7ecc34912f07463e0025787fdf59c7602e40b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-06-24mb/google/brya: Add `ext_pm_support` for volmar eMMC SKUSubrata Banik
This patch ensures google/volmar eMMC SKU has advanced PM support enabled. BUG=b:235915257 TEST=Able to boot to eMMC SKU to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3e2883d894d2ca7f810f4b72af1c12037c8fdabc Reviewed-on: https://review.coreboot.org/c/coreboot/+/65244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 11:03:33 +0000