| Age | Commit message (Collapse) | Author |
|---|
|
This was dead code as it was checking for the wrong bit (bit 11
indicates the use of shadow GTT). It was doing it at the wrong place
regardless as no BARs are set up.
Move the code clearing GTT into the GMA .init code and do it
unconditionally: if the GTT does not match 2M then the cycles are
simply not decoded.
Tested on thinkpad X200.
Change-Id: Iac3264d484e66e9ca4b3cd3df90ad87a476e31ce
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Linux complained that the numbers in DSDT (256) don't match with the
values in MMCONF (64).
Change-Id: I2ccac64934e8d284e68945f86ec46cb2bf896277
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Linux needs to know that allocating BARs above 4G is fine so reserve a
region in ACPI for that.
Tested on thinkpad X200: a PCIe window gets allocated above 4G and
Linux does not relocate it.
Change-Id: I62a8a656481eba01add3d7d06b42e3352206df1b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable MKBP (Matrix Keyboard Protocol) interface for all skyrim family
to use for buttons and switches. Disable TBMC (Tablet Mode Switch
device), as it is not needed anymore.
BUG=b:230682161
TEST=manual test on Skyrim:
Volume Up/Down and Power buttons, Tablet Mode switch
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I79ee2fdbb325491c9e3df5b9cff0c0c1181a7001
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Implement sub-function 1 (Get Device Constraints)
of the Low Power S0 Idle Device-Specific Method (_DSM).
This provides a way in which to describe various devices required
D-states to enter LPM (S0ix). The information can be used to help
in diagnostics and understanding of S0ix entry failure.
Values were derived from Intel document 595644 (rev 0.45) and
the ADL FSP sample ASL.
This implementation adds support for ADL. Other SoC's could be
ported to be included as well. If they aren't, they will default
to the existing behavior of a single hardcoded device to ensure
compatibility with Windows.
TEST=Built and tested on brya by verifying SSDT contents
Change-Id: Ibe46a0583c522a8adf0a015cd3a698f694482437
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
|
|
This board never made it to production, and development on it has long
since stopped; it is a maintenance burden, therefore drop it from the
tree.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ieb12a95ff56c3437cb88df8ef3f6ae115ad53446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
mcfg->usb_phy is a pointer to a struct usb_phy_config. The config is
constant. Changing a constant is undefined behavior, so create a local
static instance of usb_phy_config that can be modified safely.
Change-Id: Iedbc49109dcd1da9198fcb2a8f84e2b567cd8f86
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64130
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file started as a copy from Cezanne. Sabrina has less USB ports
than Cezanne. Also the struct definition of fch_usb2_phy has changed and
FSP_USB_STRUCT_MINOR_VERSION is also updated.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1ef2b62373b178d729b3230d0d8539986cc631ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add and use defines instead of magic values in fsp_m_params.c. The
values will be updated to match the Sabrina FSP in a follow-up commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I91da9e9d2b95e169dd73153766f24cf8afbfa4ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64128
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use sizeof instead of having a hard-coded struct length.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c39d770a7719e30572e71b6a6c24fa2ad4a9426
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Commit 9a8d0a03db (crossgcc: Upgrade IASL from 20211217 to 20220331)
removed this parameter.
Change-Id: Iba062efcabac88edc1f7937b75ea9d5d884b448b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Replace TPM_GOOGLE_CR50 with TPM_GOOGLE_TI50.
BUG=b:232066387
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I0cc787b3104bc47f6f856497bbc0870e0519dc28
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64252
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Fibcom FM101-GL USB WWAN configuration with the required power
sequence as suggested in Fibocom FM101-GL Hardware Guide V1.0.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the WWAN module is
enumerated in the output of lsusb.
localhost ~ # lsusb
Bus 004 Device 003: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I39f8e7204e31d9a4d093aacd838a18e6d2f44970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64004
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In Skyrim, USB-A port and WWAN modules are connected to the SoC USB
ports through an external hub. Update the USB configuration in the
devicetree accordingly. Enable the ACPI driver for external USB hub.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the hub and USB-A ports
are enumerated correctly in the output of lusub command.
Change-Id: Ibf6a3da8add7361fc50adcf7c62e46df234685dc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63586
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add chip driver for soldered down external USB hub. This driver adds
ACPI objects for the hub and any downstream facing ports.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the hub and any
configured ports have ACPI devices defined in SSDT.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I11d7ccc42d3dce8e136eb771f120825980e5c027
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63968
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We found HDMI-DDIA didn't get hot plug detection,so set GPP_E14
as the default value to let HDMI-DDIA get hot plug detection.
BUG=b:231769129
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I1b5cc1465fec519be4bbe5e027be0dc25815f4fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64138
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add related settings for synaptics touchpad.
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I3b3bb5cec56901dadaaa1c5699781df45c237257
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For multiple sockets platform 16 may not be enough, so increase
it to 32.
Tested=On a platform that has more than 16 memory DIMM,
SMBIOS type 17 can show all DIMM tables.
Change-Id: If72a8622ac1e7e67646aa4dd24b99637fb8b1297
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: lichenchen.carl <lichenchen.carl@bytedance.com>
|
|
Enable the max charge feature for cml, as the EC supports it since
Star Labs EC firmware 1.06.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I779a686960b63025fb5f40e826ed117f402a0b2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64093
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the MAX_CHARGE offset to dead_code_t for boards that don't support
the function. The avoids erroneous values being written to the EC.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I306c8a60818b780ef3bfb842e7fcc4d8500d6b03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Using CLKREQ 4 and CLKSRC 4
BUG=b:210970640
BRANCH=NONE
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: Ie0e362013551036a03ef69a98c6f1793e0e75c41
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This commit adds support for catching null dereferences and execution
through x86's debug registers. This is particularly useful when running
32-bit coreboot as paging is not enabled to catch these through page
faults. This commit adds three new configs to support this feature:
DEBUG_HW_BREAKPOINTS, DEBUG_NULL_DEREF_BREAKPOINTS and
DEBUG_NULL_DEREF_HALT.
BUG=b:223902046
TEST=Ran on nipperkin device, verifying that HW breakpoints work as
expected.
Change-Id: I113590689046a13c2a552741bbfe7668a834354a
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The bootblock.elf file gets embedded in the BIOSPSP part and loaded by
the PSP in dram. The top aligned bootblock in cbfs is unused.
Tested on Cezanne/Guybrush.
Change-Id: I72f0092e0e3628b388f6da6a417c2857a510b187
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This also adds messages when adding the files.
Change-Id: Ie812084cc243a18cbc2913804ef2190dd9d6ed9b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Using 'files_added::' is no longer needed as all files have already
been added to the build. This has the advantage of showing all final
entries in the FIT table and CBFS during the build process as adding
the bpm to cbfs and fit is moved earlier.
Change-Id: I22aa140202f0665b7095a01cb138af4986aa9ac3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I41bbdabf7b846386651e64f4afb5b7b9fb38e1cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The first target for the add_intermediate targets is always
$(obj)/coreboot.pre.
Change-Id: Iea2322ca1abd43900f3631b7965f07fed4235ca0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Some targets don't need this as the bootblock is loaded differently.
Change-Id: Ia42448f7e9dd0635c72857fbc1fab54508932721
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Some platforms don't need a top aligned bootblock in cbfs like Intel
APL or modern AMD platforms as the bootblock is loaded differently.
So they don't need the top aligned cbfs bootblock.
To not clutter the main make file move out adding the bootblock.
Change-Id: I4de9d7fedf1ae5a37a3310dd42eb07b44c030930
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This can be done in a separate Makefile target.
Change-Id: I50eae4f00d171d26a221ca969086f4f294fa524b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The makefiles don't like cbfs file names with spaces in them so update
the file name with '_' instead of spaces. To keep the master header at
the top of cbfs, add a placeholder.
This removes the need to handle the cbfs master header in cbfstool.
This functionality will be dropped in a later CL.
On x86 reserve some space in the linker script to add the pointer.
On non-x86 generate a pointer inside a C struct file.
As a bonus this would actually fix the master header pointer mechanism
on Intel/APL as only the bootblock inside IFWI gets memory mapped.
TESTED on thinkpad X201: SeaBIOS correctly finds the cbfs master
header.
Change-Id: I3ba01be7da1f09a8cac287751497c18cda97d293
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Chrome OS is experimenting with a hypervisor layer that boots after
firmware, but before the OS. From the OS' perspective, it can be
considered an extension of firmware, and hence it makes sense to emit
timestamp to track hypervisor boot latency. This change adds
timestamp IDs in the 1200-1300 range for this purpose.
BUG=b:217638034
BRANCH=none
TEST=Manual: cbmem -a TS_CRHV_BOOT to add a timestamp, cbmem -t to
verify that it got added to the timestamp table.
Change-Id: If70447eea2c2edf42b43e0198b827c1348b935ea
Signed-off-by: Mattias Nissler <mnissler@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:216594621
BRANCH=brya
TEST=build pass and SAR table be changed according to tablet/ desktop mode
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I62265e8931da48d20cf41e0c91ccb1a5b4bc1167
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Disable all of the TBT devices in devicetree since kinox doesn't support
thunderbolt. The change also need to disable TBT in fitimage
(chrome-internal:4731094).
BUG=b:231654363
TEST=Build and run on DUT.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I944680dd1f41ac6f375015a3a138eb00c41b58a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Correct tcss_usb3_port to meet Moli's schematic design.
BUG=b:220814038
TEST=emerge-brask coreboot
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: Ib8faa4a353d8d617fce7aa70922bf027e6e11b38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This fixes building with clang.
Change-Id: Ia8511ab46184aa0d8ee3a79c3ef22614aeb61298
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Although useful to declare local symbols inside macros clang does not
support them. Using the \@ symbol which increments each time the macro
is used we can do the same. With BUILD_TIMELESS=1 the binaries don't
change and do build with GCC so nothing is lost here.
Change-Id: I01054e2bdcb63810b21eb51b46bdc6e1bd999516
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We wrote to the wrong register. The EN bit is in the CC (Controller
Configuration) register at 0x14.
Fixes re-initialization in QEMU and on siemens/chili during a second
FILO run.
Change-Id: I125de55d7f1a7c9f070437190c5a08a288b274f8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We only need to know if the NVMe command set is supported. Other
command-set bits can be set too, but we don't have to care.
Fixes init in QEMU which has more command-set bits set by now.
Change-Id: I29a693cf8cc13775e94dc671e8d0412ad86fef9c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We mustn't try to release resources that we haven't acquired yet. Also,
sending commands to the NVMe device is futile if we already timed out.
Fixes hangs after a failed init noticed in QEMU and on siemens/chili.
Change-Id: Ib83c7785d6e0dc3c44fbd50a30694c74932750d6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clang needs an attribute not a comment.
Change-Id: I78f87d80bd4f366ed6cfa74619dd107ac61bc935
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Clang complains about this.
Change-Id: I421d6c5daa373d1537e4ac2243438e7f1f6208d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63067
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the variable intended for this use. This fixes building with
clang.
Change-Id: I4ee61fb9533b90ddb1a1592d5d9945761739ddb6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63062
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes building with clang.
Change-Id: I865038ffab9cd7be8aa6a42e629f108b55c08f59
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: Iba80c4a5960c6fb59f542b33e8e769576ccfed59
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
No mainboard is using this code.
Change-Id: I4374360c211593a8468b6226f3d1729885b533e0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I21bebd475dce373a77626d2e78a0ab10678ea8b6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I0d95ac9d548e410a81188307cc92f77224baea0e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I87cff1e0360e23e37201381ed8a6920ee36b2747
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61892
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang complains about unused variables when DEBUG_CONSOLE_INIT is not
set.
Change-Id: Icf5fd69fbf54b0d40bfdb17d1396d77dcb0a6060
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I3c97cb57fe13adee217783973691748d6c542abe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ic0fc521d13362b2f3047eb91af8d5b3ac74eaa1d
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I19dbf70bc9ceec1408944c4029db6eabd5e2254d
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
It's expected that the mismatch logs will be shown when doing
calibration for spmi clock. If it is failed to do calibration for spmi
clock for all data, the system will enter "die". Therefore, we adjust
the log level from BIOS_ERR to BIOS_INFO.
BUG=b:231531254
TEST=emerge-cherry coreboot
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I148b4aeaaeb10e1c269a8eccbb19e8d8e17e40ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64090
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PMIC_CPSDSA4[4:0] controls the power-down at the specified time slot.
Setting it to 0xA would cause an extra delay of 20ms compared to 0xF.
The value of time slot is from 0x0 to 0x1F which represents the delay
when reset occurs.
To avoid the delay, change the value from 0xA to 0xF.
This modification is based on chapter 3.7 in the MT8186 functional
specification.
BUG=b:218630683, b:218630684
TEST=the power-off waveform is correct.
Signed-off-by: zhiyong tao <zhiyong.tao@mediatek.corp-partner.google.com>
Change-Id: I537fe87740f0f8c25b923d7d536e81503b71762b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64038
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids compiler warnings on 64bit builds that complains about
casting pointer to non matching integer size.
Change-Id: I29fdb73ae1c0508796a21b650bf4fd1ac6688021
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable BT offload of NAU88L25B on Moli with fw_config NAU88L25B_I2S.
BUG=b:220814038
TEST=emerge-brask coreboot,
Check BT offload enabled in CPU log and audio works.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I72d91d2dafffa7d9604b7dd3d697cb3b2b04b152
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When fwupd Retimer firmware update is enabled, it needs to
differentiate the Type-C port NDA and USB/DP/TBT/USB4 DA scenarios.
This change adds support to query devices attachment. If DA, it
deasserts the Retimer power and promptly returns -1 accordingly without
impacting the flow of Retimer firmware update under NDA. Additionally,
this patch deasserts the Retimer power during error conditions.
BUG=b:212235056, 224923449, 211790542
TEST=Validated Retimer firmware update under NDA and TBT3 docks
enumeration on Type-C ports under DA.
Change-Id: I5392d0d3a947dbf172cadfe03fc708f6e2e87210
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Crota360 is using a Cirrus CS42L42 for its audio codec; it requires the
reset pin to be deasserted in ramstage for proper power sequencing.
BUG=b:230074351
BRANCH=none
TEST=build coreboot without error
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ica3467fbc8639526bee071d56af854de5e07091e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
With the PMC set to hidden, on certain Operating Systems,
including ZorinOS 16 and Manjaro 21.2.5, it would get stuck
at a black screen when exiting from S3.
With the PMC set to on, this issue no longer occurs.
Signed-off-by: Stephen Edworthy <stephen@starlabs.systems>
Change-Id: I0cf1be7f6919d974614f2196a0eb611cc40abe3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Commit 198cc26e4951b3dbca588286706b7df562c45d42 (soc/amd/common/block/
psp/psp_gen2: use SMN access to PSP) changed how the PSP registers are
accessed. Since the new method doesn't need to rely on a MMIO base
address to be configured, the read will always be successful and so
soc_read_c2p38 doesn't need to return an error status and can directly
return the value instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1abace04668947ba3223a107461a27dddc0a9d83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
A few ACPI device path name handlers are missing. Add handling
to ensure that these names are returned during acpi_device_path()
calls.
TEST=Built and tested on brya
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I37d6dd5df921c931af72dd469c3f4067c61b0df3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Currently coreboot will hang on ASPM on pcie_rp 6,
so disable ASPM to let it go into kernel.
BUG=b:231400217
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I79a80d97d168f40e58774e5652967d659daa323c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable CnviBtAudioOffload UPD from Intel Guideline
BUG=b:230418589
TEST=emerge-byra coreboot and verified pass
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I7ac54156cc4a8d824ed1c549d66fc369698a352c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The eSPI decode range defines aren't and shouldn't be used directly from
outside of the common AMD eSPI code which provides functions to abstract
the register access, so move the defines from amdblocks/espi.h to
espi_def.h inside the common AMD LPC/eSPI support directory to limit the
visibility. The special I/O range decode bits need to stay in
amdblocks/espi.h since those are used in the devicetree. Also update the
indentation in espi_def.h so that the defines line up properly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic4ea30a1a6f10e94d88bf3b29f86dee2da6b39b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64053
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sabrina has more eSPI decode ranges than Picasso or Cezanne. Those
registers are however not in one block where it's easy to calculate the
addresses of a register from the index of the decode range. Within one
group of decode range registers it's still easy to calculate the
register address, so move the base address from within the macro to the
instantiation of the macro as a preparation for adding the support for
the additional ranges.
TEST=Timeless build results in identical binary for Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id309d955fa3558d660db37a2075240f938361e83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add an enum for `DdiPortXConfig` devicetree options. Note that setting
these options to zero does not disable the corresponding DDI port, but
instead indicates that no LFP (Local Flat Panel, i.e. internal LCD) is
connected to it.
Change-Id: I9ea10141e51bf29ea44199dcd1b55b63ec771c0a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Looks like the `set_power_limits()` declaration is copy-pasta leftovers
from `cpu/intel/model_206ax`. As it's unused, get rid of it.
Change-Id: I81704e883e52fea42488f52be116b6fcc2c6af4b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch removes unused i2c7 settings. Accroding to EVT schematic,
i2c7 is reserved for AMP but resistors are unstuffing.
BUG=b:229334701
TEST=emerge-brya coreboot chromeos-bootimage && $powerd_dbus_suspend
&& checks EC log and ensures the DUT could enter s0ix.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Ifc1e0085064a13149ebc7e70184d1f40462e0fff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
To meet LTE's RF Specific Absorption Rate (SAR) certification, we add a
Semtech Smart Proximity Sensor (P-Sensor) SX9324. P-Sensor connects
EC of I2C 5 bus and GPIO D22, D23, as well as, SoC of GPIO E11, refer
to mainboard schematic.
BUG=b:213549229
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: If172d13aa62503547227adf91f049ea50b948888
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63652
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This binary file is required for use by Trusted Applications that
execute in PSP.
BUG=b:229947314
TEST=Build and boot to OS in Skyrim.
Change-Id: I2d05792cfd98fa9c38f5deef1ac3282625983eeb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch adds support for power sequencing of the Nvidia GN3050 for
agah, which uses PCH GPIOs to control the 5 power rails required for
the GPU. The GPU is power sequenced on during mainboard
initialization, then it is enumerated on the PCI bus and its resources
are assigned. This GPU will be used in a sort of "hybrid graphics"
mode, therefore during finalization, since its PCI BARs are saved into
ACPI memory and the GPU is not required upon initial boot, the GPU is
power sequenced off.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I1072be12ef58af5859e2a2d19c4a9c1adc0b0f88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch calls into the PMC IPC function that informs about PMC
enumeration.
Note: Alder Lake FSP Notify Phase 1 callback missed to send this PMC
IPC, hence, this patch is considered as an improvement over FSP Notify
Phase API.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS without any PMC IPC
error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I43cfad25a5861c5aa5dae293ff42c9cefe862ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch sends an IPC to PMC to inform about PCI enumeration.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I77d428f9501feaccab8bb431090d10ce8d3af9b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Crota360 is using a Cirrus CS42L42 for its audio codec; it
requires the reset pin to be deasserted in ramstage for proper
power sequencing.
BUG=b:230074351
BRANCH=none
TEST=build coreboot without error
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ie942b3c553823510dfa6f6fb70a7b13881fc4c14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
pmc_prev_sleep_state() isn't handling the case where acpi_sleep_from_pm1()
returns ACPI_S4. Pass that value along so it can get set as a
prev_sleep_state. Without this, consumers see prev_sleep_state as 0
and always treat resume as a cold boot. With this, consumers can
correctly do behavior specific to S4 resume, like skipping the
disconnect IPC command to the PMC on Alderlake systems.
BUG=b:230031158
TEST=Resume from S4 on Primus4es
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I3fb3dc428a749db80293e51a04a2096514a7b689
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Fix power sequence according to datasheet:GL9750S-OIY04 rev1.24.
BUG=b:229181624
TEST=Build and boot to OS in Skyrim. Ensure that the SD Controller
and SD Card are enumerated fine.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: Iea729d43d10a3f8353b4fe540146d00975f4d422
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The per-file hash for CBFS_VERIFICATION, stored as a CBFS file
attribute, would increase the total RO metadata size by 75% (3796->6656
for corsola). Therefore, in order to make RO metadata cache fit into
CBFS_MCACHE, enlarge it from 8K to 16K.
Adjust the memlayout by decreasing the DRAM_INIT_CODE from 196K to 184K
(only 160K needed for now), and moving VBOOT2_WORK region to L2C. Also
shuffle the regions in SRAM with better comments.
BUG=b:229670703
TEST=emerge-corsola coreboot
TEST=Enabled CBFS_VERIFICATION and booted kingler into kernel
BRANCH=none
Change-Id: I8e07eb9fae1644a0fbfbdc599ca0a0e11bbe54b5
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
MediaTek's bootROM expects a SHA256 of the bootblock data at the end of
bootblock.bin (see util/mtkheader/gen-bl-img.py). To support CBFS
verification (CONFIG_CBFS_VERIFICATION) on MediaTek platforms, we need
to re-generate the hash whenever a file is added to or removed from
CBFS.
BUG=b:229670703
TEST=sudo emerge coreboot-utils
TEST=emerge-corsola coreboot chromeos-bootimage
TEST=Kingler booted with CONFIG_CBFS_VERIFICATION=y
Change-Id: Iaf5900df605899af699b25266e87b5d557c4e830
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63925
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we can't rely on the MMIO base address in the PSP_ADDR_MSR MSR to
access the PSP mailbox registers, switch to using the SMN mapping of the
PSP mailbox registers. The PSP SMN base address is taken from the amdgpu
driver in the Linux kernel.
BUG=b:229779018
TEST=Mandolin still boots successfully and there are no errors/warnings
about possibly PSP-related things.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9d17e523e9ae8d8e14ecedc37131a81f82351487
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64034
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Functions that are intended to override weak ones defined in the
baseboard should not also be declared weak, otherwise how would
the linker know which copy to keep.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia2ceee77d00a5baa915fd1f306d76e79aa609e65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Based on the schematic bernadino 14 adl-p 20220318.pdf to set
GPP_D16 to enable webcam power
BUG=b:230289857
BRANCH=none
TEST=build and notice log kernel v5.10
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I01c73006d24b00be348655334232bea5eeb312e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add entries to the devicetree override for brya0 and enable the Kconfig
to ensure the Chrome OS EC Mux driver is build tested.
BUG=b:208883648
TEST=None
BRANCH=None
Change-Id: Icf841cd32587f6bd98b15747283b0d331f013532
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some platforms have retimers which can be configured via the EC. Add a
handle to these retimer devices to the Type C connector device, using
devicetree references.
BUG=b:208883648
TEST=Verify disassembled SSDT on brya.
BRANCH=None
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Change-Id: Ic0480b08c6d6a7562cca57192e49b8ea2a33b51e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Introduce an EC Mux ACPI device, which will control retimer and discrete
(off-AP) mux configuration.
BUG=b:208883648
TEST=None
BRANCH=None
Change-Id: Ia2022810292783583ee5f09ce29a63b96686dbb8
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This documents the boards that have been removed from the master branch,
and which branch to check out to build or work on them.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iee25db13e2c1b0b9131fd2032a26ece45aba4f42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This extends and adds various options to the update_submodules script.
Extensions:
- Add help text
- Add all options, but specifically allow a single repo to be specified,
along with a minimum number of changes instead of being fixed at 10.
- Make it a more formal script with main() and functions
- Show changes in commit message, unless there are > 65 commits.
Options:
-c | --changes <#> Specify the minimum number of changes to update a repo
-h | --help Print usage and exit
-R | --repo <dir> Specify a single repo directory to update
-s | --skipsync Assume that repos are already synced
-V | --version Print the version and exit
This does not fix style issues in the original, which will be fixed in
a follow-on commit.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I222103babff7d5f4f8eb02869c598a4e06748a17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Use common ASL defines for POST code handling.
Change-Id: I5b4c11860a8c33e56edaea0f6de378cbaa63a8c5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63989
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move ASL POST code declarations into a common file to avoid redundancy.
Also, provide a dummy implementation when `POST_IO` is not enabled, as
the value of `CONFIG_POST_IO_PORT` can't be used.
Change-Id: I891bd8754f10f16d618e76e1ab88c26164776a50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Align POST code ASL elements with existing code in newer southbridges.
The main differences are that `NoLock` is changed to `Lock`, and that
names have been changed. The lock type change should not be a problem
because the field is only used once in the _PTS method.
Change-Id: I8aa362007ff98e5b42add6c7908a8f7beac2222b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
To pave the way for future refactoring commits, drop POST code elements
from the debug.asl file. Only msi/ms7721 includes debug.asl and it does
not use any of it anyway.
Change-Id: Icd73e5c1f700fd7e735bed1668f02da8f9a3adf3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CORE_2_PSP_MSG_38_OFFSET and CORE_2_PSP_MSG_38_FUSE_SPL are only used in
psp_gen2.c, so move them into this file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67cc2ff63d1c0322b514521975f3ce0f9b1cf5b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: Ia0550a115d75183cd72e478ae739731001febe22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This fixes the following issues found by the markdown lint tool, mdl:
MD014 Dollar signs used before commands without showing output
MD026 Trailing punctuation in header
MD030 Spaces after list markers
MD031 Fenced code blocks should be surrounded by blank lines
MD040 Fenced code blocks should have a language specified
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I82317f51c003b2c23d64c3cbbcecbf9a39d5d509
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ADL-S CPU has maximum 3 PCIe interfaces when the x16 link is bifurcated
into two x8 links. ADL-S PCH has up to 28 PCIe Root Ports, 18 CLKOUT and
CLKREQ signals. ADL-S CPUs do not have Thunderbolt.
Based on the Intel DOC #619501 and #619362.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I408c815d5a43c081beb3f84d795c2b863ce33eb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Notify IOM to enable or disable TBT displays on S0ix exit and entry
respectively.
Change-Id: I9f49d8e30fe8e8b335128e53d71ef902328f031a
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add display on and off notifications which call mainboard hooks if
present. This allows to handle some board specific functions in user
absence or presence (when display goes off from inactivity or on from
activity).
TEST=Use Display on/off notification on Clevo NV41 to tell EC about
laptop inactivity. It is necessary to properly handle S0ix entry (stop
the fans and start blinking the power led).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: Ie80f631ecffa74467ab6d6162e552ba977f7e3f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch just adds some comments to the recently merged mem_chip_info
struct for communicating memory type information to the payload/OS, to
clarify the expected format in which values are to be written into the
fields.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2c28b3bdcdb13b7f270fb87a8f06e2cf448cddec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
As recommended on crrev.com/c/3612466 lz4 code is not supposed
to be modified. Since both gcc and clang complain about
functions without explicit void in argument with Wstrict-prototypes,
just disable it instead instead of enabling.
BUG=b:230345382
TEST=llvm tot test
BRANCH=none
Signed-off-by: Manoj Gupta <manojgupta@google.com>
Change-Id: I9f3ae01821447f43b4082598dd618d9f8325dca2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63936
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per Microsoft's spec for HID over I2C [1], interrupts must be level
triggered. Switch GPIOs and the devicetree config to conform to this.
Touchpad and multitouch gestures were already working, so no behavior
changes are observed in normal use.
[1]: http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx
Change-Id: I485e616ae00e10bc3620ff3fa1fc1e903653c5cc
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
