| Age | Commit message (Collapse) | Author |
|---|
|
Use a define instead of magic numbers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c6d17bd78a0e207f9130102b43ba78aa55ce377
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Previously acpigen_pop_len always wrote a 3 byte PkgLength to the 3
bytes reserved by acpigen_write_len_f. After this patch acpigen_pop_len
encodes PkgLength in 1-3 bytes depending on the PkgLength. When less
than the 3 bytes that were previously reserved in the corresponding
acpigen_write_len_f call are needed for PkgLength, the payload data will
be moved back by the number of reserved bytes that aren't needed for the
PkgLength.
This fixes the problem that the Windows AML parser doesn't like a 3 byte
PkgLength being used for the size of the buffer containing UTF-16
strings when the length could be encoded in a single PkgLength byte. In
that case, Windows previously ignored the whole SSDT containing this
larger than necessary PkgLength encoding. It should however be noted
that the ACPI 6.4 spec doesn't specify if it's required to always use
the most compact possible encoding of the PkgLength or not. Since iasl
generates the shortest possible PkgLength encoding, it's also a good
idea to make coreboot's acpigen do the same although it's not required
by the specification.
With this patch applied, Windows still boots on Mandolin and the time it
takes to write the tables doesn't change. To measure the times, the log
level in bs_sample_time was increased to BIOS_CRIT and the console log
level was increased to BIOS_CRIT too to only get those times as output.
BS: BS_WRITE_TABLES run times (exec / console): 8 / 0 ms
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib897b08a05a7cdc52902d51364246c260ea1f206
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
This patch adds asl code for MMIO device like I2C, UART, GPIO etc.
Change-Id: Ic5bc2cc0141e9da7e2c6ed7691188d7c94b6b1e3
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>t show
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78895
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for the new memory CXMT CXDB4CBAM-ML-A.
BUG=b:304932936
BRANCH=firmware-dedede-13606.B
TEST=Run command "go run \
./util/spd_tools/src/part_id_gen/part_id_gen.go \
JSL lp4x src/mainboard/google/dedede/variants/pirika/memory/ \
src/mainboard/google/dedede/variants/pirika/memory/\
mem_parts_used.txt"
And confirm the mainboard boot normally with CXMT
CXDB4CBAM-ML-A memory.
Change-Id: Iff2ed16bcbc9b0755e60a284246aa928625fa26a
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78892
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Some functions in the headers for sc7180 and sc7280 specified the
int as their return type when they should have used enum cb_err.
Found while testing GCC 13.2.0
Change-Id: I41331fe708a396f7f2f40359e8ba03c8a46a4d4b
Signed-off-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With the update to GCC 13 a new warning about subtracting numbers from
arrays appears.
src/arch/arm64/armv8/mmu.c:296:9: error: array subscript -1 is outside array bounds of 'u8[]' {aka 'unsigned char[]'} [-Werror=array-bounds=]
Change-Id: I4757ca2e7ad3f969d7416041ea40c3e9866cdf49
Signed-off-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79014
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The THRM and SATA PCI devices do not currently have any ACPI devices
defined, so drop them from soc_acpi_name() so they do not end up in
the LPI constraint list. This eliminates the following errors
under Linux:
AE_NOT_FOUND: _SB_.PCI0.THRM
AE_NOT_FOUND: _SB_.PCI0.SATA
TEST= build/boot google/hatch (jinlon) and verify no ACPI errors.
Change-Id: I3827b152644e2eaecc1ad288d441d2dad4d76ccb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79013
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After commit adaeb1102186 (nb/intel/sandybridge: Clean up post Haswell SPD mapping API migration), no boards use this header anymore and it
no longer offers original content.
Adjust northbridge code #includes as needed and drop it.
Change-Id: I2785e920bd6188dbfc1a6157351083ec4a2526d0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
After commit 940fe080bf1e (mb/apple/macbookair4_2: Correctly implement
SPD mapping the Haswell way), this file is obsolete
and can be removed.
Change-Id: I5afe6809c7097ab8529a3c1ec7befbd0d6f01c5f
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
With commit adaeb1102186 (nb/intel/sandybridge: Clean up post Haswell SPD mapping API migration), raminit_native.h now only includes 4
other headers and offers no original content. Based on the idea that
all source files should include what they use directly, drop it in
favor of sandybridge.h (which it already includes anyway) and types.h
(replacing stdint.h because it also uses boolean constructs).
Board appears to not use anything sb/intel/bd82x6x/pch.h provides.
And the board still builds after dropping it.
Change-Id: I1b201fe4dd29bac5feb08f372d1e36353eac161d
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78783
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All of these signals have net names, but are actually unstuffed, so we
have to set them to NC.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I27d8b7cd02aefb49a2dc031a30eb0d1e8aa9faa9
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Report smbios_cpu_get_voltage() on Sandy Bridge as well.
Change-Id: I13ea930a58eaedc24d69fa3790f1f2a151558a80
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78432
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skip sending EOP from coreboot when payload is sending it.
BUG=b:279184514
TEST=Verify sending EOP from depthcharge on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0fbb9fd0f8522eefad39960ca3167c2ba764f523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74765
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I866250602701e7e83a695d346f4b404b1bbae6d5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I4f2c4f4a576ea2fd2ccb7a7e6b52cf258bac5f84
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79043
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ie25c56f48648733095ab9d2a565c842b2f90efb2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79041
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic25d112a95903e77b58bda70bbcc3f08df383395
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: If4f89fb81664474e03ab0ade76cfbd617127127e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79040
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I413a3630bda841ae9ed6c4a584d2250a81c28308
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic4043828baf43d14f7f2060fa3946e3a9e2008fc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79038
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The comments related to the PCI devices are superfluous since the
reference names from the chipset devicetree are used. So remove the
comments and also the devices which are turned off, or in general have
an equal state compared to the configuration in chipset devicetree.
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic45446b03a3c571837fc1c41f55d60bdf2a25a7e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ib1adeaf4745804dfc91f99fb4e4491b68631202c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
- Disable unconnected PCH PCIe ports 1 + 3.
- Add smbios_slot_desc to WLAN PCIe port
- Add comment for PCIe port 7 that might have a
XHCI controller connected (some variants only).
Test: Lenovo X220 still boots and all devices are still working
fine. The WLAN slot is shown in dmidecode -t 9.
Change-Id: I3fdfbb7ad30e2ff8a289d9055eaef0557475fdff
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I6ba850c783999d06c73137ed77d32fc108a20347
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I41b3ed4926fe77c5729672fd7a7bcb8ca0c5c216
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79033
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ib6edae61fb904143c3b3994df812524a258fa9f3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I9f92246da4a500e85c878d865d621033f6b35f1b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
With migration to Haswell SPD mapping interface complete:
1. Remove weak stubs meant to ensure smooth transition and
internalizes mainboard_get_spd() within raminit.c.
2. Remove post-mainboard SPD data sanitization code in raminit_mrc.c,
now that it fills its own SPD data.
3. Remove old prototypes from raminit_native.h
4a. Drops raminit_native.h from raminit.c, as individual headers
therein are already included.
4b. Drop another header from raminit.c IWYU identified as unneeded.
asus/p8z77-m still builds afterwards.
(sandybridge to receive a full IWYU cleanup later.)
Change-Id: Ie073c1386cd0a645069f0e1416263b4fa359b74b
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76991
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Boards without HAVE_SPD_IN_CBFS: Move SPD mapping into devicetree.
Boards with HAVE_SPD_IN_CBFS: Convert to Haswell-style SPD mapping.
Change-Id: Id6ac0a36b2fc0b9686f6e875dd020ae8dba72a72
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
While converting this board to provide SPD info using the Haswell API,
it was discovered that its SPD setup was not correct to begin with.
For a board that only has soldered down memory with SPD data in CBFS,
it didn't enable HAVE_SPD_IN_CBFS in Kconfig. It also duplicated one
set of SPD data with deliberate gaps in between. It worked its dark
magic within mainboard_get_spd(), which is going away as a callback.
Add HAVE_SPD_IN_CBFS to mainboard Kconfig, recreate the one set of SPD
data as a hex dump same as other boards, and hook everything back up
with Haswell-style mb_get_spd_map().
Recreated SPD data was extracted from abuild-built binary and manually
verified for correctness against existing spd.bin (which will be
removed in a follow-up).
Change-Id: I906c49f6d1949f830828530edc0298b1b22ec04d
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76995
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changes both MRC and native raminit code path to get SPD mapping
from one place.
Boards with all memory socketed specify their mappings in a
devicetree setting introduced in commit 5709e03613b3
("nb/intel/sandybridge: Migrate MRC settings to devicetree") back in
May 2019 but remains unused as of this patch. This setting
will now hold raw SMBus addresses, and MRC raminit gets code to
translate them into a representation MRC expects.
Boards with soldered down memory (specifically with HAVE_SPD_IN_CBFS
in their board Kconfig), with or without socketed memory, specify
their layouts in mb_get_spd_map() as used by Haswell boards, where
they access hardware GPIO straps to select which SPD data to use.
This harmonizes the way boards specify their SPD layouts across
Haswell/SNB/IVB boards whether using MRC or native raminit. Going
forward they only need to specify the layout in one place. (Going
forward the devicetree setting should be backported to Haswell,
once we get native raminit working there.)
With this, northbridge code is now fully responsible for loading
all SPD data, be it from CBFS or SMBus.
To avoid breakage, transition will happen in stages:
1. This patch gets all the code in, and implements weak stubs that
maintain existing code and data flow (i.e. mainboards still populate
final SPD layout data). At this point devicetree already uses new
representation, but is still unused meaning no breakage.
2. Follow-up patch(es) remove mainboard_get_spd() from mainboards, and
replace it with mb_get_spd_map() or devicetree values (as appropriate)
with converted SPD info. The "weak" mainboard_get_spd() with new logic
takes over. Boards go Haswell Style at this point. Boards with MRC
raminit also lose code to fill in SPD data, allowing new data to take
hold.
3. Clean-up patch removes the weak functions and public prototypes re
mainboard_get_spd(), making it internal to northbridge. Changeover is
complete.
Change-Id: I1a75279d981e46505930a9ce1aae894ccc4e1f24
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76965
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I0f069f02e4f0957cbff05d1bc9aa499fb51b6a02
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch uses AMD SoC common code for MCA and adds MCA bank
information as per Genoa Processor Programming Reference (PPR)
version 0.25 (#55901) and uses AMD SoC common code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If728d803d600f7e86507cd1b35b40022bf4d379e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76524
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All CPUs properly come out of reset and relocate SMM.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I8c2d976addacd5a2ba70eb629510128853b9f847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Default value of HEAP_SIZE is 0x100000, since genoa has a lot of
CPU increase the HEAP_SIZE to 0x200000
Change-Id: Idd707200fe72730849267cd3cafc40e44f1f8c5d
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In vboot_get_context(), vb2api_reinit() is called to restore the vboot
context from the previous stage. We use assert() for the return value of
vb2api_reinit() because there shouldn't be runtime errors, except for
one edge case: vb2_shared_data struct version mismatch. More precisely,
when RW firmware's VB2_SHARED_DATA_VERSION_MINOR is greater than RO's,
vb2api_reinit() will return VB2_ERROR_SHARED_DATA_VERSION.
To avoid using an invalid vb2_context pointer (when FATAL_ASSERTS is
disabled), change assert() to die() on vb2api_reinit() failure. For the
vb2api_init() case the assertion is unchanged because there shouldn't be
any runtime error for that.
Also move the vb2api_init() call outside the assert() argument, as
assert() may be a no-op macro depending on the implementation.
Change-Id: I4ff5ef1202bba2384c71634ec5ba12db1b784607
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The symbol VBT_DATA_SIZE_KB was removed in commit 8bde652241 -
"drivers/intel/gma/opregion: Use CBFS cache to load VBT" CB:77886,
however that patch only removed the Kconfig option from the Intel
chipsets, leaving it unused in the mainboards.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia29d8d6ec17b172e662ff591849f1668d65f1ff9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78967
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This is a fixup to CB:78914 which inadvertently broke the RK3288 SoC.
Unfortunately we can only accommodate very little PRERAM_CBFS_CACHE in
the tiny SRAM for that chip, so we would not be able to map an entire
FMAP. Solve this problem for now by mapping less space when CBFS
verification is disabled, and disallowing CBFS verification on that SoC.
Change-Id: I2e419d157dc26bb70a6dd62e44dc6607e51cf791
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Proposed in the comment of commit 29030d0f3dad
("drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume"),
during sanitize_cmos(), only reset CMOS range covered by checksum and
the checksum itself from the file cmos.default in CBFS, in order to
prevent other runtime data in CMOS (e.g. the DRAM training data on
GM45 platforms for s3 resume) being erased.
Tested: cherry-pick this commit before commit 44a48ce7a46c ("Kconfig:
Bring HEAP_SIZE to a common, large value"), which is already
before my commit 29030d0f3dad , Thinkpad X200 with
CONFIG(STATIC_OPTION_TABLE) can resume from s3 again,
indicating that DRAM training data are no longer erased.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Co-authored-by: Jonathon Hall <jonathon.hall@puri.sm>
Change-Id: I872bf5f41422bc3424cd8631e932aaae2ae82f7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
init() was always followed by open() and after successful initialization
we only need send-receive function which is now returned by tis_probe()
on success, thus further reducing number of functions to export from
drivers.
This also removes check for opening TIS twice that seems to have no
value.
Change-Id: I52ad8d69d50d449f031c36b15bf70ef07986946c
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76954
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a few new files to romstage, that will be needed in
follow-up patches.
Change-Id: I2ba84e0becee883b5becf12e51f40734cad83d7d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68839
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Updating from commit id d81517e:
2023-09-28 14:13:56 -0600 - (Improper bit field offset calculation)
to commit id 0411c75:
2023-11-10 23:59:34 +0000 - (Minor changes to fix issues compiling with clang)
This brings in 1 new commits:
0411c75 Minor changes to fix issues compiling with clang
Change-Id: Ib3adfd7bccd45dfd76ede462677dcfb294baa15d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibaf2f54f2f428f4438ef22b7f9d205db10e144db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79001
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ib1af1359249008d9eba351271637748a7edcec26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78966
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add variant of LTE and WFC support on gothrax board.
We base decisions on the values within the firmware configuration
CBI field.
In fw_config settings, if the board move LTE and WFC modules,
the hardware GPP_A8/GPP_E13/GPP_F12/GPP_H19/GPP_H23/GPP_R6/GPP_R7
pins need to be deasserted.
BUG=b:303526071
TEST=emerge-nissa coreboot & \
Check against schematic.
Whether it works as expected under different SKUs.
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: Ia8041bdc599509911bde95d6294314036e75b227
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78916
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
There is no enumerate_buses() today and also no trace of it in our
repository. Also, in current terms, mainboard_enable() is called
as the very first thing in our enumeration so the comment seems
misleading.
Change-Id: Iae620f83c8166c1cfc8b9fb9ef4a7025987bf1be
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
RK3288 is bursting at the seams again. This patch reshuffles two more
kilobytes to verstage to make things fit a little better.
Change-Id: I5e7667061dce3d02441be83c0b8fb81500a1b1a3
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78970
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The buffer length is in bytes, and since we are converting from ASCII
to UTF-16, the value written needs to be 2x the string length + null
terminator.
TEST=build/boot google skyrim (frostflow), dump acpi and check bytecode
for correct buffer length preceding unicode strings.
Change-Id: Id322e3ff457ca1c92c55125224ca6cfab8762a84
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I51b3bca2421b64f73d4d3c0d9346a1416bf15f35
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78976
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When a variant setup is used, checking for each variant in order to do
the mainboard configuration is quite painful. Thus, move the selects
from BOARD_SPECIFIC_OPTIONS, which is enabled by default when a variant
is chosen, out to a common option, which is disabled by default but
selected by the variants.
So in order to enter that config block, it's only needed to check if
that common option is enabled and not for each variant. It's also a very
common scheme now.
Change-Id: I4ed889ce78a0d7cd088e05d0f4b7fbbc89153860
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I836c35e6bbfa77d536065a4237ef85a170df9fdb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
MSI PRO Z790-P is not an IoT platform. FSP_TYPE_IOT was selected only
temporarily to allow builds from public components. Now that Client FSP
is available, switch to it.
TEST=Build and boot MSI PRO Z790-P
Change-Id: Ic5d84e48d58c3454b83b9df5eb93076d2ebde000
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
The Client FSP for Raptor Lake-S is present on the Intel FSP repository,
so there is no need to restrict Raptor Lake-S FSP binary repository to
IoT only.
TEST=Build and boot MSI PRO Z790-P
Change-Id: I77aecd6e2d753732bf6358afe2c7ea0491348387
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The combination of SOC_INTEL_RAPTORLAKE_PCH_S and FSP_TYPE_IOT is
currently broken. By default, e.g. for MSI PRO Z790-P, the
FSP_HEADER_PATH does not match the default FSP_FD_PATH. For headers
the client FSP is selected, while for the FD file, IoT FSP binary
is chosen. The order of default for both headers and FD file must be
the same to match the headers and binaries.
TEST=Build default MSI PRO Z790-P config and see that FSP_HEADER_PATH
matches FSP_FD_PATH FSP variant-wise.
Change-Id: I8db5ea10c2986ff8d3fa7d616b3f1617d05f0260
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78410
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Dynamic Tuning Technology (DTT) device IRQ is not programmable and
is INT_A/PIRQ_A (IRQ 16).
Reference: Meteor Lake U/H and U Type4 External Design Specification
External Design Document (657165)
TEST=Linux driver successfully uses IRQ 16 on rex. Without this patch
it was binding IRQ 18 but interrupts were going to IRQ 16.
Change-Id: I2cbb9dd41f27c40a29346be325bb9c46d1061afb
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
With the latest hardware revision of both mainboards, native function
two of GPIO B23 (PCHHOT_N) is used for diagnostic purposes.
BUG=none
TEST=Checked output verbose GPIO debug messages
Change-Id: Ibe130b5d4c74576294183221765c5f4db9b5ec2a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78962
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename AZALIA_PLUGIN_SUPPORT to AZALIA_HDA_CODEC_SUPPORT and add a help
text to this Kconfig option to clarify what this option is about.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71e36869c6ebf77f43ca78f5e451aebfb59f1c74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia005915a05d02725f77b52ccd7acebefaf25d058
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78964
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the SMI transfer monitor (STM) is configured, get_save_state
returns an incorrect pointer to the cpu save state because the size
(rounded up to 0x100) of the processor System Management Mode (SMM)
descriptor needs to be subtracted out in this case.
This patch addresses the issue identified in CB:76601, which means
that SMMSTOREv2 now works with the STM.
Thanks to Jeremy Compostella for suggesting this version of the patch.
Resolves: https://ticket.coreboot.org/issues/511
Change-Id: I0233c6d13bdffb3853845ac6ef25c066deaab747
Signed-off-by: Eugene D. Myers <edmyers@cyberpackventures.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Update DFP port setting for retimer power GPIO
BUG=b:302428013
BRANCH=none
TEST=Retimer enumaration in NDA works.
Change-Id: Idc1a728ec4cbb66e776c2700025db41d85801c60
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
That select is duplicate to the ones in the Kconfig file, and it
shouldn't be there anyway. Remove it.
Change-Id: I1a940f034a69f72280d15ab9a0c9d83f8111910e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78973
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Later GSCs don't need a EC_IN_RW GPIO anymore, so removing the use of
this for get_ec_is_trusted().
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I29f94969e9f2c1f239d9f9655f39b8410296f695
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Having a separate romstage is only desirable:
- with advanced setups like vboot or normal/fallback
- boot medium is slow at startup (some ARM SOCs)
- bootblock is limited in size (Intel APL 32K)
When this is not the case there is no need for the extra complexity
that romstage brings. Including the romstage sources inside the
bootblock substantially reduces the total code footprint. Often the
resulting code is 10-20k smaller.
This is controlled via a Kconfig option.
TESTED: works on qemu x86, arm and aarch64 with and without VBOOT.
Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
There's no reason to name this choice block. Remove the name.
Change-Id: Iebf8b1e7af928b988ab514d9dd85d2e70bf00c09
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78917
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add FW_CONFIG probe to separate WFC settings.
WFC_PRESENT/WFC_ABSENT
Add FW_CONFIG probe for new DB_USB sku.
DB_C_A_LTE/DB_A
BUG=b:303526071
TEST=emerge-nissa coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I93e0bce4b8be37e259efe0d7b0185035b3e88785
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78963
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DDI on ports 1 to 4 for Type-C DisplayPort.
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I3acaff4a9306f2d058ce9542e8956ee0acba94cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78498
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As TOUCHSCREEN_I2C_SPI will be used for two different configurations,
splitting it to TOUCHSCREEN_GSPI and TOUCHSCREEN_THC, and re-order
the FW_CONFIG bits by moving VPU to different bit position.
BUG=b:307774932
TEST=build and boot rex
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ied4d732ef7993e95edbb7eb281842b9392e72820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Some GPIOs (like WP and GSC) need to be configured in bootblock.
Making sure that they get configured earlier for this.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I8dd4853bc05b954f47d858d87ea2aed48e4b8074
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78943
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are some inaccuracies in arbitrage. This is the first pass at
correcting the incorrectly generated configs. I also tried to update
the "No heuristic was found useful" comment generated by arbitrage
into something more useful (ie: the appropriate NFs).
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I836565e09a3e0b25746b3e2f9ed6610eaacf7e97
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78942
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialise overridetree based on the schematics revision 20231020A.
Added data.vbt just only for running abuild completed.
Real vbt define by CONFIG_INTEL_GMA_VBT_FILE in chromium:4936896.
BUG=b:304920262
TEST=abuild -v -a -x -c max -p none -t google/brya -b anraggar
Change-Id: I232bde990747be80e1ab62c3f0d010d5fc854cb5
Signed-off-by: wuweimin <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78456
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPIOs according to schematics revision 20231025G.
BUG=b:304920262
TEST=abuild -v -a -x -c max -p none -t google/brya -b anraggar
Change-Id: I7be6829fc27ee20e014c372d704333ebfd4967b8
Signed-off-by: wuweimin <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This achieves the same without the strconcat & free dance.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4d8e9bae6085a6e05847b01497fb4b51041ca7b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The coreboot_version global variable just gets filled with the
COREBOOT_VERSION macro so there is no reason to use a runtime strconcat.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3a2be7293d07ac591855ebd784bba350cdffa70f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78945
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Setting EC SLPT bit in S5 will make HP EliteBook 820 G2
fail to reboot under Linux 6.1 and later kernel versions.
Change-Id: I48f5a35cd78db3b32d9f76cb8e266c738da34e7c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Now that VBOOT_CBFS_INTEGRATION exists, it is possible to use
TOCTOU_SAFETY with VBOOT.
Change-Id: I9f84574f611ec397060404c61e71312009d92ba7
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78915
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When the FMAP cache is enabled, it cannot fail in pre-RAM stages unless
flash I/O in general doesn't work. Therefore, it is unnecessary and a
waste of binary size to also link a fallback path for this case.
Similarly, once the cache is written to CAR/SRAM/CBMEM there should be
no way for it to become magically corrupted between boot stages. Many
other parts of coreboot blindly assume that persistent memory stays
valid between stages so there is no reason why this code should link in
extra fallback paths in case it doesn't.
This saves a little over 200 bytes per affected (uncompressed) stage on
aarch64.
Change-Id: I7b8251dd6b34fe4f63865ebc44b9a8a103f32a57
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78904
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A recent security audit has exposed a TOCTOU risk in the FMAP
verification code: if the flash returns a tampered FMAP during the first
setup_preram_cache(), we will abort generating the cache but only after
already filling the persistent CAR/SRAM region with the tampered
version. Then we will fall back into the direct access path, which could
succeed if the flash now returns the original valid FMAP. In later
stages, we will just use the data from the persistent CAR/SRAM region as
long as it looks like an FMAP without verifying the hash again (because
the hash is only linked into the initial stage).
This patch fixes the issue by just calling die() immediately if FMAP
hash verification fails. When the verification fails, there's no
recourse anyway -- if we're not dying here we would be dying in
cbfs_get_boot_device() instead. There is no legitimate scenario where
it would still be possible to continue booting after this hash
verification fails.
Change-Id: I59ec91c3e5a59fdd960b0ba54ae5f15ddb850480
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78903
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The rarely-used fallback path for accessing the FMAP without a cache
currently only maps the FMAP header for the initial verify_fmap() call.
This used to be fine when we were just checking the magic number, but
with CBFS verification we may need to hash the entire FMAP.
Since this path is so rarely used anyway and the size difference only
has a practical impact on a few platforms, lets keep things simple and
just always map the whole FMAP.
Change-Id: Ie780a3662bf89637de93a36ce6e23f77fed86265
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78914
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
+-------------+----------------+------------+
| USB 2.0 | Connector Type | OC Mapping |
+-------------+----------------+------------+
| 1 | Type-C | OC_0 |
+-------------+----------------+------------+
| 2 | Type-C | OC_0 |
+-------------+----------------+------------+
| 3 | Type-C | OC-0 |
+-------------+----------------+------------+
| 4 | Type-A | OC_3 |
+-------------+----------------+------------+
| 5 | Type-C | OC_0 |
+-------------+----------------+------------+
| 6 | Type-A | OC_3 |
+-------------+----------------+------------+
| 7 | Type-A | OC_3 |
+-------------+----------------+------------+
| 8 | Type-A | OC_3 |
+-------------+----------------+------------+
| 9 | Type-A | OC_3 |
+-------------+----------------+------------+
| 10 | BT | NA |
+-------------+----------------+------------+
+---------------------+-------------------+------------+
| USB 3.2 Gen 2x1 | Connector Details | OC Mapping |
+---------------------+-------------------+------------+
| 1 | Type-A | OC_3 |
+---------------------+-------------------+------------+
| 2 | Type-A | OC_3 |
+---------------------+-------------------+------------+
+------+-------------------+------------+
| TCPx | Connector Details | OC Mapping |
+------+-------------------+------------+
| 1 | Type C port 0 | OC_0 |
+------+-------------------+------------+
| 2 | Type C port 1 | OC_0 |
+------+-------------------+------------+
| 3 | Type C port 2 | OC_0 |
+------+-------------------+------------+
| 4 | Type C port 3 | OC_0 |
+------+-------------------+------------+
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I743fd82f088a57e906b8b9d0fe2e012d9c5f9567
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78497
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Change-Id: I167a02bf2219c6ef8e0093956a649305c8e8f76b
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add I2C config based on Deku schematics.
TPM is connected to I2C 4
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Change-Id: I496e236531b2b59b320c77c36f542f4fa80a51a1
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78449
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RAM id for:
MT62F2G32D4DS-026 WT:B (Micron)
BUG=b:305793886
TEST=Run part_id_gen tool without any errors
Change-Id: If2ed2bdcee44f6dbbda51a3ff484edaf3df4830d
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Drop the hda_soc_ssdt_quirks function since it doesn't apply for any of
the SoCs supported by the Stoneyridge code which was the only SoC
implementing it. This code was added when commit 91a7abf25c72
("soc/amd/hda: Move HDA PCI device from DSDT to SSDT") rewrote the code
originally added in commit 1587dc8a2b4d ("soc/amd/stoneyridge: Add
northbridge support") as a copy from northbridge/amd/pi/00670F00. This
code was moved around in commit 6580408a7e0a ("amd/pi/hudson: Move audio
to northbridge"), since the HDA controller was moved from the FCH to the
northbridge complex. When the controller was moved, the PCI config space
interface also changed, so those bits are no longer the DisableNoSnoop,
DisableNoSnoopOverride, and EnableNoSnoopRequest bits of the Misc
Control register of the HDA controller, but some bits within the
ClassCodeW field of the ACGAZ Mirrot Reg Ctrl 0 register.
BKDG #55072 Rev 3.04 (Stoneyridge), BKDG #50742 Rev 3.08 (family 15h
model 60h-6fh / 00670F00), and BKDG #52740 Rev 3.05 (family 16h model
30h-3fh) were used as a reference. Only the SoC with BKDG #52740 still
has the HDA controller in the FCH; the other two have it in the
northbridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77fc76752b1c7de62ba8a196f15c198f55be3074
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78940
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6.
Reason for revert: It breaks wakeup from suspend on a bunch of boards.
While this approach of eyeballing "correct" values by chipset _should_
be fixed, it should also be accompanied by compile time verification
that the memory map works out.
Since nobody seems to care enough, let's just revert this, instead of
keeping the tree broken for a bunch of configurations.
Change-Id: I3cd73b6ce8b15f06d3480a03ab472dcd444d7ccc
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78850
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Now VBOOT is always assumed to run after romstage and be linked inside
romstage. This currently is the case but for flexibility reasons (e.g.
linking romstage into bootblock or having a verstage before romstage)
this could be more precise.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I361731c930a35e12245153920df1b6884d47064c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
A .data section now exists.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic1510221582aca91c814d43f522a8fb6cba05921
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78937
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I34812fbcd1222eceeb9870b9cbb7431ead63ce6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78936
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4113dc3208fe15305d1132136dd33417dd086bfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I708e8a3b503eb3a7fdf6063803d666529096f651
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This is a RW mirror of AMD's openSIL for Genoa with additions from
Arthur Heymans.
- origin/openSIL/main from
https://github.com/openSIL/openSIL.git
- origin/ArthurHeymans/64b_public from
https://github.com/ArthurHeymans/openSIL.git
The current main branch starts with Arthur's branch and adds 5 commits
from the AMD's openSIL repo.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8917edf3a6a8493ffa9230902cafcc6234d3d571
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9fc155fe76c05fefd4ce31ae6b96dcc4527b6abc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0eae9e4d246bd07f43b1d77e5ad7649c010d0efe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8dc93b12b81abee41f6f225f41d1f9953d1d93e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
All base addresses of MMIO devices in the devicetree should also have
corresponding defines in iomap.h. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0444e6cc0587b484a4a1ff49fa4b1540a24c8e80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78897
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The base addresses of I2C 5 and I3C 3 were wrong and all I3C controllers
should use the base address of the 4kiB block where all registers of
that I3C controller are located in. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1c983d4a709000ef7963b96228322603b98728aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove space to improve compatibility with OS drivers and various
tools, and to be consistent with other device names with the 360
suffix.
TEST=build/boot Windows/Linux on Akali360, verify audio functional.
Change-Id: Ib9b909dba939f726e6fbe71f5b4956b432086029
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The value from raw_read_cntfrq_el0() could be large enough to cause
overflow when multiplied by USECS_PER_SEC. To prevent this, both
USECS_PER_SEC and tfreq can be reduced by dividing them by their GCD.
BUG=b:307790895
TEST=emerge-geralt coreboot
TEST=boot to kernel and check the timestamps from `cbmem`
Change-Id: I366667de05392913150414f0fa9058725be71c52
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78800
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After CB:78800 applied, the bootblock increases 2128 bytes and exceeded
its allotted size (40K). Therefore, we enlarge BOOTBLOCK to 44K to solve
the compilation error. This patch also increases PRERAM_CBFS_CACHE to
103K to fill the empty space (1K) between TIMESTAMP and TTB.
BRANCH=none
BUG=none
TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -B
Change-Id: Iae9d44939b29098e823508dd3965a1bae7a69041
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I30e4b02a9ca6a15c9bc4edcf4143ffa13a21a732
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78799
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Implement a simple GCD function.
BUG=b:307790895
TEST=emerge-geralt coreboot
TEST=make tests/commonlib/bsd/gcd-test
Change-Id: I21819cda4299b3809b8ca7a95cbdc6a87e4b3481
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78798
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
