summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-02-05sb/intel/bd82x6x: Support ME Soft Temporary Disable ModeEvgeny Zinoviev
- Add support for ME Soft Temporary Disable Mode. In this mode, ME doesn't load its kernel and freezes at Bring UP (BUP) phase. This mode is saved in ME NVRAM (and thus will remain for next reboots and poweroffs). - Add support of new CMOS option for Sandy Bridge and Ivy Bridge ThinkPads. HOW TO USE To disable ME: 1. nvramtool -w me_state=Disabled 2. reboot To enable it back: 1. nvramtool -w me_state=Normal 2. reboot To check current status: intelmetool -m Tested on ThinkPad X230 and ThinkPad X220. BACKGROUND There's no Intel documentation that would explain how this should be implemented, in public. Working binary sequence for MKHI command to put ME in Soft Temporary Disable Mode, as well as a way to bring ME out of it (by writing to H_GS register), was found and published by researchers from PT Security: 1. To disable ME, BIOS issues the disable command (before End of Post) and reboots. ME is supposed to be disabled on the next boot after DID (DRAM Init Done). My numerous tests show that issuing the command and rebooting is not enough. If we reboot too early, ME will not be disabled. Apparently, it is doing something in background after receiving the command. It works with a delay of 500-1000 ms. I also tried to dump all known (documented) registers, such as GMES and HFS, before and during the next 2 seconds after execution of the disable command to find a possible indication that something's changed in ME and we're ready to reboot. Found nothing unfortunately. 2. To enable ME back, host writes value 0x20000000 to H_GS. PT slides don't contain any more information on it, but my tests show, that after writing this value, GMES[31:28] is changing from 0x01 (BUP phase) to 0x03 (Policy Module) to 0x06 (Host Communication). Then, after some more time, fw_init_complete bit of HFS becomes 1. This means that ME starts loading its kernel immediately, without reboot. On the other hand, Lenovo BIOS clearly perform a reboot after enabling it (one reboot after saving the settings, then ThinkPad logo appears, and then one more reboot). I'm assuming we have to reset too. Change-Id: Ic01526c9731cbef4e8552bbc352133a2415787c2 Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
2021-02-04sb/intel/{bd82x6x,ibexpeak}: hide MEI if ME inoperableJames Ye
- Add Kconfig option to hide the Management Engine Interface device so the OS doesn't try to access it, if the Management Engine is in an inoperable mode, e.g. if me_cleaner is used. - Also hide the MEI if the ME is in Soft Temp Disable mode. Change-Id: Ie4a35bf5fc196e0a02b7591cdb8633d38f0c7f3e Signed-off-by: James Ye <jye836@gmail.com> Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
2021-02-03mb/google/volteer/variants/drobit: Configure USB2 port for Type-CHEADmasterWayne3_Wang
USB2 ports assigned to type-C connector need to be configured properly by the USB2_PORT_TYPE_C. and also modify the description of USB port. BUG=b:177480902 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot chromeos-bootimage build Pass And check the typeC port function is normal by manual. Signed-off-by: Wayne3_Wang <Wayne3_Wang@pegatron.corp-partner.google.com> Change-Id: I9e962f8cd76e1986700821168594c50bc21553e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50217 Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03soc/intel/tgl: Add configurable value for ConfigTdpLevelDerek Huang
According to Tigerlake TDP specifications (doc #575683, table 4-2), TGL supports different TDP levels depends on CPU segement/package, IA Cores and graphics configuration. For example, UP3 4-Core GT2 suppots base TDP=28W, Configurable TDP-Down_1=15W and Configurable TDP-Down_2=12W. This configurable value can be used to select suitable TDP level Change-Id: I4242575807caac172b6cbe667839bf6c9241f3c5 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-02-03mb/google/volteer/var/voema: Enable EEPROM for OV2740David Wu
Add ACPI entries for AT24 NVM device. BUG=b:169551066 TEST=Build and run for basic camera functions. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ib8fb684166649f78713050d62445bf47189b06ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/50216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jim Lai <jim.lai@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-03soc/amd: rename sb_init_acpi_ports to fch_init_acpi_portsFelix Held
There's no dedicated south bridge any more and now we have integrated FCHs in the SoCs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I19126da09f034f51b134f8d6ae2006f57fac1b0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/50209 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03soc/amd/cezanne: remove UART2/3 AOAC device offsetsFelix Held
UART2 and UART3 don't exist on Cezanne which now has been verified, so remove the corresponding AOAC offsets. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I67755bd34df3a835cc39929bdc24f711d158b3a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-02-03soc/amd/picasso: clean up and re-sort UPD tableChris Wang
Clean up the unused UPD and re-sort the table, and also update the new phy parameter in the soc code and overridetree. remove: EDpPhySel EDpVersion rename: DpPhyOverride -> edp_phy_override EDpPhySel -> edp_physel DpVsPemphLevel -> edp_dp_vs_pemph_level MarginDeemPh -> edp_margin_deemph Deemph6db4 -> edp_deemph_6db_4 BoostAdj -> edp_boost_adj eDP phy setting: DP_VS_LEVEL0_PREEMPH_LEVEL0 = 0x00(0.4v 0db swing 0,pre-emphasis 0) COMMON_MAR_DEEMPH_NOM = 0x004b COMMON_SELDEEMPH60 = 0x0 CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80 BUG=b:171269338 BRANCH=zork TEST=Build, verify the parameter pass to picasso-fsp Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I655af08e2f86398d088e30d330f49e71cf7e1275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-02-03mb/google/volteer/variant/copano: support regular/numpad touchpadZhuohao Lee
Define the 25th bit of the fw_config for the regular touchpad and numpad touchpad selection. BUG=b:174027837 BRANCH=firmware-volteer-13672.B TEST=build pass Change-Id: Ic5d61f19fd385600cfdcdd045dab1e61b06e4663 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-03vc/intel/fsp/fsp2_0/alderlake: Update FSP header file version to 2037Subrata Banik
List of changes: 1. FSP-M Header: - Adjust Reservedxx UPD Offset 2. FSP-S Header: - Adjust UPD Offset for Reservedxx Change-Id: I808cf619f43e629c6150726f2aa29e732e05fc33 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-03amdfwtool:cezanne: Add entry of PSP_BOOTLOADER_AB (0x73)Zheng Bao
Change-Id: Ie3577b403c1de7f20b6d5bcf9e1a5d47450266fe Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-03ec/hp/kbc1126: Wait a longer time after sendingPablo Stebler
This fixes the fan always running at full speed on ProBook 6360b, EliteBook 8470p and ProBook 640 G1 (because the fan control command was not sent). On the ProBook 6360b, the EC needs about 30 ms to process the first command on a cold boot, but other models such as the ProBook 640 G1 need more time. Change-Id: I8623af75c062d6aa69d4412e0627d426c69019fb Signed-off-by: Pablo Stebler <pablo@stebler.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-03pci_ids/intel: Add missing CFL-S GT1 IGD IDsNico Huber
Change-Id: I372b6b2d602dfe116d5791bb6a6653454523b42b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
2021-02-03pci_ids/intel: Correct 0x3e96, it's a CFL-S partNico Huber
Change-Id: Ibdddb3309f862f52c578e91ba3dc310dff8f70bc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Timofey Komarov <happycorsair@yandex.ru> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-03src: Remove unused <boardid.h>Elyes HAOUAS
Change-Id: I960870fabde1dacfe52a8a35c253b0bd097d3e10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-02-03src: Remove unused <cbmem.h>Elyes HAOUAS
Change-Id: I2279e2d7e6255a88953b2485c1f1a3b51a72c65e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-03soc/ti/am335x/header.c: Add missing includeElyes HAOUAS
Use of 'offsetof' needs <commonlib/bsd/helpers.h>. Change-Id: Ie250b20f464909649b2bd038dbb757d5df637486 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44738 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/google/volteer/variants/drobit: Modify touchpad I2C sequenceWayne3_Wang
Modify touchpad I2C sequence to meet requirement. BUG=b:178512111 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot chromeos-bootimage build Pass And check the touchpad I2C5 sequence by EE. Signed-off-by: Wayne3_Wang <Wayne3_Wang@pegatron.corp-partner.google.com> Change-Id: Iebbeeec51b802c318ac014dcdd2603b600d931a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49958 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/google/volteer/variants/drobit: Add TBT PCIE rp setting for drobitWayne3_Wang
Add the TBT PCIE rp setting to on and also fixes system hang in recovery screen after selected "Power off" item problem. BUG=b:177963941 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot chromeos-bootimage build Pass And check the system can power off normally in recovery page Cq-Depend: chrome-internal:3581043 Signed-off-by: Wayne3_Wang <Wayne3_Wang@pegatron.corp-partner.google.com> Change-Id: Ic0a4756b4af839ea0a23febb991bd71af7733dcc Reviewed-on: https://review.coreboot.org/c/coreboot/+/50103 Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Ariel Chang <ariel_chang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03intel/xeon_sp: Select TPM_STARTUP_IGNORE_POSTINIT if INTEL_TXT is selectedJohnny Lin
Because ACM already does TPM initialization. Change-Id: I49cc3b0077b220b0ca0bfa048be1e3d3d7023b05 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-03hatch: Update fan and thermal settings for ambassadorNeill Corlett
Update fan and thermal settings for ambassador, per recommendations from Quanta. BUG=b:177765580 TEST=Built AP firmware Change-Id: I080859f872caf696f0c085defb8372de658da58a Signed-off-by: Neill Corlett <corlett@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50100 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Joe Tessler <jrt@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/biostar/th61-itx/early_init.c: Clean includesElyes HAOUAS
Change-Id: I0619e567527812bd0e7088d23d91f114c8fec9ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-03drivers/aspeed: Fix some issuesPatrick Rudolph
* Use probe_resource instead of find_resource. This prevents a call to die and instead returns NULL. * Handle the case where BAR2 isn't present * Don't hardcode legacy VGA when BAR2 is present. This fixes graphic initialisation when the Aspeed isn't the primary GPU and thus doesn't decode VGA cycles. This makes the coreboot code more similar to the Linux kernel code. Change-Id: I2a99712a562a57c65f1cd0df7b1d7606681afe9b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50195 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/google/sarien: Turn `hda_verb.h` into `hda_verb.c`Angel Pons
Change-Id: I40c8145fdddf9605bc3cc66ae8075e52dca4e539 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-03soc/intel: Fix compilation on x86_64Patrick Rudolph
Change-Id: I18a0c18fe1c64611f95bc423916447c89585db9f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-02-02soc/amd/picasso/pcie_gpe: use PICM instead of PMOD in APCI codeFelix Held
commit 3f2467032e3e40cd456d2d9fe5120a60283784aa changed this in the APCI code itself, but the change in the ACPI byte code generation in pcie_gpp.c was missed and this patch fixes that. TEST=Fixes the regression on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I60de29581296101947336f70343d6206af97e307 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-02-02soc/amd/picasso/include/soc/southbridge: remove PM_USB_ENABLE definesFelix Held
This define was copied over from Stoneyridge, but isn't present on Picasso and newer. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ideb144c4bff441cf043a647b3f44a65691038eba Reviewed-on: https://review.coreboot.org/c/coreboot/+/50205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-02-02mb/siemens/mc_apl1: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Iac8a6e386b708ae5c4dbf0677bfe05f1358bf8fd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49442 Tested-by: siemens-bot Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-02soc/intel/baytrail,braswell: Drop TOLM from GNVSKyösti Mälkki
It's a static value that is neither referenced from SMI handler nor needs to be updated on S3 resume path. Change-Id: Ife6611a11e5627d39d59e0e93af9aa2d87885601 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50121 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-02soc/intel/baytrail,braswell: Sync PCI memory region in ASLKyösti Mälkki
Baytrail had (only) occurence of DwordMemory vs DWordMemory. Braswell one had bogus comments about the PCI memory range. The actual region details are dynamically filled in _CRS. Change-Id: I8d1bf45c6e5520c0b7643602843c665bfb81f9da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-02treewide [Kconfig]: Remove useless commentElyes HAOUAS
Change-Id: I3dafffa61f4fe6089fd11ef6579626aff8088df5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01soc/amd/common: Use only byte access for old GPIOKyösti Mälkki
Change-Id: I06ec29845d051d9b90ab6f3cfb269ad5e6b75ea8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-01soc/amd/picasso/fch.c: Remove unused <acpi/acpi_pm.h>Elyes HAOUAS
Change-Id: I5fea31f5893227a3e076c83a1759d3795b68c943 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-02-01soc/amd/common: Drop ACPIMMIO GPIO bank separationKyösti Mälkki
It's assumed in ASL already that the banks appear one after other in ACPIMMIO space. There is no need for the separation of accessor functions by name. Change-Id: I4c8c3f2028ca89dca5c7f0548fcd18e1045999d6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-01mb/pcengines/apu2: Switch to proper GPIO APIKyösti Mälkki
Use the abstractions <gpio.h> provides. Change-Id: I348ba43a76287be5b24012ae3dfc28ed783da9c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-02-01soc/intel/broadwell/gma.c: Add missing `break` in switchAngel Pons
Otherwise, the `GT_CDCLK_675` case falls through and exits early. Change-Id: Icb979f8a980e1a1e1c712c5d9bc8d94c90376b7f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-01soc/mediatek/mt8192: Enlarge DRAM_INIT_CODE sizeYu-Ping Wu
From the output of 'objdump -x dram.elf', the DRAM blob needs 222K memory, but currently only 208K is reserved for it. Since MT8192 has 1MB SRAM L2C, increase SRAM_L2C_END to 0x00300000, and reorganize regions in SRAM_L2C to have larger DRAM_INIT_CODE (256K). The size of OVERLAP_DECOMPRESSOR_VERSTAGE_ROMSTAGE is also increased to 252K. BUG=b:170687062 TEST=emerge-asurada coreboot TEST=Asurada booted successfully BRANCH=none Cq-Depend: chrome-internal:3568265 Change-Id: I062f00739b72cf6b1bb7ac3318b91721fbe226cc Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-02-01sb/intel/i82801ix: Factor out common `acpi_fill_madt`Angel Pons
It is the same for all three mainboards. Change-Id: Ic5786bcc29e2549d6fc935d60c699c1cab84b237 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50027 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01sb/intel/common/rcba.h: Guard RCBAx macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Change-Id: I689983b5b937f66b1a520eea61a38fb96c13c007 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50035 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01soc/intel/skylake/Kconfig: Remove duplicated INTEL_DESCRIPTOR_MODE_CAPABLEElyes HAOUAS
Change-Id: I15a1c17e870b04cc1238b54e4f69c227c877ca09 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-01src/soc/intel: Remove CPU_INTEL_COMMON_SMM selectionElyes HAOUAS
CPU_INTEL_COMMON_SMM is already selected in cpu/intel/common/Kconfig file. Also remove duplicated 'CPU_INTEL_COMMON'. Change-Id: I3328da567ac588e9bf6d57481fca117cc302a23a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-01cpu/x86/name/name.c: Clean up includesElyes HAOUAS
Also sort includes alphabetically. Change-Id: I49615434b140601ce599b4a63aa42c82874bd0f7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44315 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01src: Remove unused <cpu/x86/smm.h>Elyes HAOUAS
Change-Id: Ic3f85a8fbc6a84074f45d94514e1dcfa78cb0958 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01nb/intel/ironlake/bootblock.c: include <arch/pci_io_cfg.h>Elyes HAOUAS
Change-Id: Ide960d7957e8a95961ec3722ad7478926a84c544 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01nb/intel/i945/bootblock.c: include <arch/pci_io_cfg.h>Elyes HAOUAS
Also replace 'reg' with 'reg32'. Change-Id: I2aa8862de0f7629386ef09acbb0606056cc3697c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49537 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01nb/intel/x4x/bootblock.c: include <arch/pci_io_cfg.h>Elyes HAOUAS
Change-Id: Ib370fc1bae017d084844eece44799676a657323b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01mb/google/dedede/variants/drawcia/variant.c: Remove unused <bootstate.h>Elyes HAOUAS
Change-Id: I38d115f2c405128a8d80aec48d2d9d3f25867151 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45815 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01soc/samsung/exynos{5250,5420}/include/soc/cpu.h: Add missing includeElyes HAOUAS
Use of 'KiB' needs <commonlib/bsd/helpers.h> Change-Id: Ia6ba36fd4b0364cc9984523f0add859869068727 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44737 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01nb/intel/gm45/bootblock.c: include <arch/pci_io_cfg.h>Elyes HAOUAS
Also rename 'reg' to 'reg32'. Change-Id: Id741f636162a8a228bca069637993422deb5e09c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01nb/intel/haswell/bootblock.c: include <arch/pci_io_cfg.h>Elyes HAOUAS
Also rename 'reg' to 'reg32'. Change-Id: Ie8dd238a8f10daad9653f44b3ada329c3ede58fe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01nb/intel/sandybridge/bootblock.c: include <arch/pci_io_cfg.h>Elyes HAOUAS
Also rename 'reg' to 'reg32'. Change-Id: I3aca03dfe20dd0a61cba3ba55146f76e412a2c5e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01mb/google/{butterfly,link,rambi,stout}: Remove unused <acpi/acpi_gnvs.h>Elyes HAOUAS
Change-Id: If5c35f3518e2cc4d5760a64e0d38fc4843af498a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50164 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01nb/intel/i945: Drop casts from DEFAULT_{MCH,DMI}BARAngel Pons
They aren't necessary. Removing them changes the binary because the corresponding access macros no longer perform pointer arithmetics. Change-Id: I9723a00b58ee35befdce6a3a51aa2b1fce8efa80 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49745 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01soc/intel/alderlake: Create separate Kconfig for CLKSRC and CLKREQSubrata Banik
As per Hardware Architecture Specification (HAS) ADL-P has 7 CLKSRC and 10 CLKREQ (7 SRCCLK is internal and 3 SRCCLK from external CLK chip). ADL-M has 6 SRCCLK and CLKREQ (no external CLK chip). Change-Id: I7d223c165f819669722cbc80245fa8ec20372352 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50130 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01security/vboot: Add config for GBB_FLAG_ENABLE_UDCEric Lai
This change adds the missing `GBB_FLAG_ENABLE_UDC` as a config in vboot/Kconfig (just like the other GBB flags) and uses its value to configure GBB_FLAGS Makefile variable. This is done to allow the mainboard to configure GBB flags by selecting appropriate configs in Kconfig. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I6b397713d643cf9461294e6928596dc847ace6bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/50110 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01bayhub bh720: Add helpers to access PCR registersAngel Pons
The BH720 PCR registers are accessed using an index/data register pair. Introduce some helper functions to clarify the PCR register operations. Change-Id: I1a48b10071af20dca61b7dd90c5a70bc9d1089b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-01sb/intel/i82801gx,ix: Drop MPEN from GNVSKyösti Mälkki
It's a static value that is neither referenced from SMI handler nor needs to be updated on S3 resume path. Change-Id: I3928e5973fe65d9a4fe7975e5d5584efe6e5f2f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01soc/amd: Drop PCNT from GNVSKyösti Mälkki
It's a static value that is neither referenced from SMI handler nor needs to be updated on S3 resume path. Change-Id: Iab2741242b0e2df8a0429ffaad270ce21882588c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01mb/google/dedede/var/magolor: Configure Acoustic noise mitigation UPDsRen Kuo
Enable Acoustic noise mitigation for magolor and set slew rate to 1/8 which is calibrated value for the board. BUG=b:178678267 BRANCH=dedede TEST=build firmware to UPD and Acoustic noise test Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Idea2a801399bb5c7e0b8e59ee7a826c86a44f4ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/50099 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01soc/intel/elkhartlake: Config PlatformDebugConsentFrans Hendriks
UPD PlatformDebugConsent field is not configured. The config SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT is available but not used. Use this config value for PlatformDebugConsent. BUG= N/A TEST= Build Intel Elkhart Lake Change-Id: I697fb611dfb23e107fa8ef1543424b9797a7d027 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50108 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01lib/asan.c: Update SPDX licenseFrans Hendriks
lint-000-license-headers reports error. The SPDX identifier contains GPL-2.0 Update the identifier to GPL-2.0-only. BUG = N/A TEST = Build Intel Elkhart Lake Change-Id: If49fd014f14b481163bca6cd3131139b6d95c6d8 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01soc/intel/common/sata: Add support for Cannon Lake SATA (HALO)Erik van den Bogaert
Add device ID of Cannon Lake PCH-H Mobile HALO SATA controller in supported device table. Bug=N/A TEST=Build of Intel Coffeelake H SO-DIMM DDR4 RVP11 successfully completed Change-Id: Ie1c2aa8273a53c47d7b3571394bcd85b59ab1142 Signed-off-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-02-01include/device/pci_ids.h: Add Cannon Lake PCH-H SATA dev IDErik van den Bogaert
Add SATA controller ID for Cannon Lake PCH-H Mobile HALO (see document number: 571182) Add SPDX license header Bug=N/A TEST=Build of Intel Coffeelake H SO-DIMM DDR4 RVP11 successfully completed Change-Id: Ic7e6ace2a24b4278b04caa58be907d38f4d117cd Signed-off-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-02-01console/console.h: Move get_console_loglevel() declarationArthur Heymans
If for a stage __CONSOLE_ENABLE__ is 0, then there would be no prototype for a get_console_loglevel() definition. Change-Id: I805078921a5cc1506685f8aada3af5c5241260b7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50083 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01drivers/security/cbnt: Fix bootblock sizeArthur Heymans
Change-Id: Ic5ad9d29f247b6f828501bfacc27a8af08761d55 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-01cpu/x86/mp_init.c: Print out the microcode revision of APsArthur Heymans
It is useful to know if MCU have been applied successfully. On the start of MP init lines similar to: "AP: slot 1 apic_id 1, MCU rev: 0x0700001d" will be printed. The example is taken from the log of an ocp/deltalake. Change-Id: Ia0a6428b41d07f87943f3aa7736b8cb457fdd15a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49840 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01cpu/intel/microcode: Reuse existing function to read MCU revisionArthur Heymans
Change-Id: If198fa68c0a29f46906151e667d7b00e2a3ab00d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01arch/x86/smbios: Add Number Of Power Cords field to be overridenJingleHsuWiwynn
For SMBIOS type 3, add function to override number of power cords Tested=Exectute dmidecode -t 3 to verify. Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com> Change-Id: I7dee3a944a49ffcfdc2f4408d92a17aa39761bb0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01nb/intel/haswell: Calculate TSEG limit from registersAngel Pons
Done for consistency with other northbridges. Change-Id: I08023809477c1cef0d7762b5e4fde65fadf6a6d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-01nb/intel/haswell: Create RMRR for iGPUAngel Pons
Taken from Broadwell. Change-Id: I246fdc1473bf8949073377d03622026bd3e6aafa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-01sb/intel/lynxpoint: Use correct port mask for LPT-LPAngel Pons
Lynxpoint LP only has 4 SATA ports. Change-Id: I565a0b2d29ac8fff8b5d87e0f1dbb3667f229365 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47035 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01mb/google/brya: Initiate peripheral busesEric Lai
Initiate peripheral buses based on latest schematic. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ibf48aceca7ac8774b0353e31bd81e1880c4066ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/49007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-01mb/google/volteer: Select SOC_INTEL_CSE_LITE_SKU for volteer baseboardFurquan Shaikh
This change moves the selection of SOC_INTEL_CSE_LITE_SKU into Kconfig under BOARD_GOOGLE_BASEBOARD_VOLTEER instead of requiring each individual board to select it. TEST=Verified that timeless build does not result in any changes. Change-Id: I2d94931fdc3077794bed5cc51708b5a5d9e64972 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-01mb/google/volteer: Drop boldar variantFurquan Shaikh
This variant never really got used and can be deprecated. Change-Id: I5d59460c90266ba5f9c3bdb951f53a37ffae9e03 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-01mb/google/brya: Change EC -> PCH wake pin to GPP_F17Boris Mittelberg
A new schematic revision indicates that the old wake pin is not used, and brya will only use 1 IRQ pin from EC, routed to GPP_F17 BUG=b:178605367 TEST=Build test Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: Ia2bc5b1562ab30b4461fc7e3b1a4bc3e370db588 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-01Revert "mb/google/hatch/dratini: Describe the privacy_gpio"Ricardo Ribalda
This reverts commit f41645c34d8b22a3d887abd56138ae794fc2dfa5. In Dragonair, during the MP stage, one of the resistors needed for this functionality has been removed. This results in the privacy-switch not readable back by the system. BUG=b:178458332 Change-Id: I0781f338d5ecd89fccee613fb13ea25c59385625 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01ipmi/ocp: Move common OCP/Facebook IPMI OEM codes into drivers/ipmi/ocpJohnny Lin
1. These are common OCP/Facebook IPMI OEM commands, move from mainboard into drivers/ipmi/ocp to avoid code duplication and provide better reusability. 2. OCP Tioga Pass enables IPMI_OCP driver. Tested=On OCP Delta Lake and Tioga Pass verify the commands still work correctly. Change-Id: Idd116a89239273fd5cc7b06c7768146085a3ed69 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2021-02-01soc/amd/stoneyridge/acpi: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated dsdt.dsl files are same. Change-Id: Ife9bb37817815beec6dad4bc791abba4d91abe00 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-02-01soc/intel/broadwell/pch/sata.c: Don't enable Bus MasterAngel Pons
Bus Master is not required and reference code does not set it. Change-Id: I2f70486f96cf3dcaba74283293b93b9747cd0300 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-02-01soc/intel/*: Get rid of custom microcode cachingPatrick Rudolph
Get rid of custom microcode caching in MPinit and SGX code and use the caching introduced in intel_microcode_find() instead. Change-Id: If3ccd4dcff221c88839ffeafa812f4c38cede63f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01device/oprom/include/x86emu/fpu_regs.h: Fix lint errorFrans Hendriks
`make lint` reports errors and warnings Solve the next errors: - SPACE_BEFORE_TAB - SPACING BUG = N/A TEST = Build Compulab Intense-PC with secure oprom enabled Change-Id: Ic7062e07a76bf95fe8e2e849f1d14342c9081a23 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49938 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01drivers/intel/fsp2_0: Use CBFS_MCACHE when coreboot tears down CARArthur Heymans
TESTED on ocp/tiogapass. Change-Id: I30560149eeaec62af4c8a982815618be5546531c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01soc/intel/xeon_sp: Use native CAR teardownArthur Heymans
This cleans up the postcar frame setup, which now gets used instead of just going with TempRamExit MTRR's. Note that ramstage CPU init sets up different final MTRRs anyway. TESTED on ocp/deltalake and ocp/tiogapass. Change-Id: I756c2d479fef859a460696300422f08013a300f1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01drivers/intel/fsp2_0: Use coreboot postcar with FSP-TArthur Heymans
Allow platforms to use the coreboot postcar code instead of calling into FSP-M TempRamExit API. There are several reasons to do this: - Tearing down CAR is easy. - Allows having control over MTRR's and caching in general. - The MTRR's set up in postcar be it by coreboot or FSP-M are overwritten later on during CPU init so it does not matter. - Avoids having to find a CBFS file before cbmem is up (this causes problems with cbfs_mcache) Change-Id: I6cf10c7580f3183bfee1cd3c827901cbcf695db7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48466 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-31soc/intel/*: drop incomplete and unneeded check for DMI SRLOCKMichael Niewöhner
Before enabling IO decode ranges, current code checks if the DMI SRLOCK is set to prevent inconsistencies between LPC PCI cfg registers and LPC DMI registers, when the latter are locked. DMI SRLOCK only applies to PCHs with on-package DMI, but not to PCH-H, PCH-S and others with discrete PCH packages. So this check is at least incomplete. Further, the lock gets applied by FSP and gets reset on a warm reset. Thus, there is no case where the lock would be already set at the places where the DMI registers get written currently. Drop the checks for the reasons mentioned above. Change-Id: I59554ce96bce7f7d1a4ba9b098be9e8466c68eac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49885 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-31soc/amd/common/block/aoac: expand acronym in Kconfig help textFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I08ad12cd7c8de7a7f170d3dc76c8942131687301 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50163 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-31mb/emulation/qemu-q35: Use common MADTAngel Pons
Select SOUTHBRIDGE_INTEL_COMMON_ACPI_MADT and drop the `acpi_fill_madt` function definition, which is redundant. Tested, still boots to payload. Change-Id: I6ba448f264a478e7ef060ea1dfbf5016a310d528 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-31mb/emulation/qemu-q35: Define and use MMCONF_BUS_NUMBERAngel Pons
Also refactor the machine type checks to avoid code duplication. Tested, still boots to payload with 256, 128 and 64 busses. Change-Id: Ib394ba605bbfeee75aa645e989c23034cceff348 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50025 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-31soc/amd/cezanne/Kconfig: select common PSP gen2 supportFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6068e8b9eb210ce4907fda09208e66e380842de Reviewed-on: https://review.coreboot.org/c/coreboot/+/50152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-31soc/amd/picasso/psp: move soc_get_mbox_address to common PSP gen2 codeFelix Held
The function to get the PSP mailbox address is the same on Picasso and Cezanne, so move it to the common PSP generation 2 code. The function is only used in the same compilation unit, but it can't be marked as static due to the function prototype in amdblocks/psp.h that is still needed for Stoneyridge. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ieea91ef76523d303f948d29ef48e3b2e56293f26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-31soc/amd/stoneyridge/psp: fix check of MSR_PSP_ADDR contentsFelix Held
TEST=Checked documentation, but not verified on hardware. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I06399ac9cb9c90701dbcba71cbc808a0d7e6ea0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/50150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-31soc/amd/picasso/psp: fix check of MSR_PSP_ADDR contentsFelix Held
If MSR_PSP_ADDR is uninitialized, it's all zeros and not all ones. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iecd3039f63f9d0cb75fe3cb37aee92ba65bbbb50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-31soc/amd/*/psp: move MSR_CU_CBBCFG to common and rename to MSR_PSP_ADDRFelix Held
TEST=Checked that the MSR is the same for Stoneyridge, Picasso and Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id15715ed1c17f4fc475985dcb1c31a83713ee65c Reviewed-on: https://review.coreboot.org/c/coreboot/+/50149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-31soc/amd/stoneyridge/southbridge: move PSP BAR hide bit to its registerFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id9838e2433004686e3ea82724c55066bcee1f019 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-31soc/amd/cezanne: add soc/cpu.h with CPUID define for Cezanne A0 steppingFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9b6d8b0c5ff5e58f6ab487d9fe724534f0108f83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-30sb/intel/ibexpeak: Drop invalid ME finalisation functionAngel Pons
Was copied from bd82x6x and none of the PCI IDs matches that of Ibex Peak (PCI_DID_INTEL_IBEXPEAK_HECI1 = 0x3b64). Remove the code. This allows dropping the me_8.x.c dependency, which never made sense. Change-Id: I54df1e080048c0599dbee687ec617fb724cb6634 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-30soc/intel/broadwell/pch: Drop some `config_of` usesAngel Pons
There's no need to die here. Also simplifies merging with Haswell. Change-Id: I3d4bc79b32279180442dbc82126e297f11f1fb80 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-30soc/intel/broadwell: Move `ramstage.c` to PCH scopeAngel Pons
The remaining code in this file is PCH-specific. Change-Id: I0e4924e680db9c25aeb222bdd478b3282a77b34f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49946 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-30soc/intel/broadwell: Make `broadwell_init_pre_device` staticAngel Pons
This small function is only used in one place. Change-Id: Ieccdca60fb7837b6406a6b2fd7ebae86958a1afe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49945 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-30soc/intel: Replace `SA_PCIEX_LENGTH` Kconfig optionsAngel Pons
Use the existing `MMCONF_BUS_NUMBER` and `MMCONF_LENGTH` symbols. Change-Id: I88dcc0d5845198f668c6604c45fd869617168231 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 11:55:18 +0000