Age | Commit message (Collapse) | Author |
|
Some registers of PMIC init settings are protected, so we failed to
set the correct value for init_setting. We disable protection before
setting PMIC init setting and enable it afterward.
BUG=b:216263707
TEST=PMIC setting value is set correctly.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I94d73d9c8a137444988e65c3709d29a3a4c03c5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61390
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modem uses different memory regions based on LTE/WiFi.
This adds correct carve-out to prevent region being disturbed.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 developement board
Signed-off-by: T Michael Turney <quic_mturney@quicinc.com>
Change-Id: I56bfb210606b08893ff71dd1b6679f1ec102ec95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
To timely update stylus charging status (b:206012072), PCHG device
events have been moved to MKBP. This patch registers the MKPB host
event as a wake-up signal to match the change.
EC filters other EC_MKBP_EVENT_* events (chromium:3413180).
BUG=b:205675485,b:206012072
Cq-Depend: chromium:3413180
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: Ie4536b2c0ccc37f92dfa940c5a5712340a32c82c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I0ef8c0159c99606aad537fd5e14d3c74e32651d8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ib9670ee22e36dd988a75b2f8dc565534927b6107
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
As all librem_skl devices ship with the ME disabled via HAP bit and ME
firmware "neutralized" via me_cleaner, the HECI1 PCI device should be
marked off/disabled to ensure that heci_reset() is not called at the end
of heci_init(), as this causes a 15s timeout delay when booting
(introduced in commit cb2fd20 [soc/intel/common: Add HECI Reset flow in
the CSE driver]).
Change-Id: Ib6bfcfd97e32bb9cf5be33535d77eea8227a8f9f
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add senor board to QUP FW load for: APPS I2C, ESIM SPI & fingerprint SPI.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I6fdd09bb437547e6d12eb60c4b2917d2a3074618
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I61c695fb4fef3ae36ffc5a263236b9d40c299dc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Add initial support for Acer Aspire VN7-572G (Skylake-U).
Also note that there are two similar boards, Aspire VN7-792G and
Aspire VN7-592G; both are Skylake-H. These are not supported (yet).
Do not flash images intended for Aspire VN7-572G on those boards: the
GPIOs and HSIO routing will be different and may risk damage
to the hardware.
Working:
- Payload
- TianoCore (custom fork of MrChromebox's UefiPayloadPkg; edk2-202102)
- OS
- Fedora 35 (kernel 5.14.15)
- Windows 10 20H1 (bugs present: battery paging fixed; abandoning testing)
- Both DIMM slots
- eDP and HDMI display (VBT partially matches vendor's configuration)
- with FSP GOP
- with IntelGopDriver (in payload: TianoCore)
- with libgfxinit
- Audio
- Speakers and headphone jack
- Internal microphone
- HDMI audio
- Devices
- PCIe and SATA (unable to test M.2 SATA)
- Discrete graphics, Ethernet and WiFi
- USB ports (unable to test type-C, touchscreen and fingerprint reader)
- Includes internal devices (Bluetooth, SD card reader and webcam)
- TPM
- Keyboard and touchpad
- Optimus (see CB:28380, CB:40625 and CB:40628)
- ACPI functionality
- S3 suspend and resume
- EC support
- Internal flashing with flashrom
- CMOS settings
In progress:
- EC SMM functionality
Not working:
- vboot (breaks boot): See CB:58249
Notes:
- `tpm2_pcrallocate` to enable SHA256 PCR bank
Not implemented:
- WMI
Change-Id: I6340116abfeb2fbd280d143b74d323e4da3566f6
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)
IASL will issue a warning for each missing dependency.
Ignore this warnings for existing ASL code and issue a message when the build is complete.
Change-Id: I28b437194f08232727623009372327fec15215dd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The recovery mode is meant to provide fixes for the platform deformity
hence, skip locking the GPIO PAD configuration to provide the same
flexibility to the platform owner while booting in recovery mode.
BUG=b:211950520
TEST=Able to build and boot the brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0f0a3cfb2be7f2a5485679f6a3d8cb4fb407fcf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Add supported memory parts in "mem_parts_used.txt" and generate
the SPD ID 0x04 for the parts.
Shuboz memory table as follow:
value Vendor Part number
0000 MICRON MT40A512M16TB-062E:J
0001 HYNIX H5AN8G6NCJR-XNC
0010 MICRON MT40A1G16KD-062E:E
0011 SAMSUNG K4AAG165WA-BCWE
0100 MICRON MT40A512M16TB-062E:R
BUG=b:216571906
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ib0100456457adabed6fd6615e0873de2cf9acb98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61373
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The existing TCSS registers access is through the REGBAR. There will be
future platforms which access the TCSS registers through the Sideband
interface. This change abstracts the common block API for TCSS access.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I3e2696b117af24412d73b257f470efc40caa5022
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: I55682de4a1bc74f170e2044de35b0d8d53ef51ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
If the HECI1 PCI device is disabled, either via devicetree or other
method (HAP, me_cleaner), then we don't want/need to program a BAR,
set the PCI config, or call heci_reset(), as the latter will result
in a 15s timeout delay when booting.
Test: build/boot Purism Librem 13v2, verify heci_reset()
timeout delay is no longer present.
Change-Id: I0babe417173d10e37327538dc9e7aae980225367
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The EC_GOOGLE_CHROMEEC_ACPI_MEMMAP is intended for Chrome microchip ECs
only, which have different requirements as to the amount of memory
mapped space they can claim. The brya family of boards does not use
any microchip ECs, therefore remove this Kconfig.
BUG=b:214460174
TEST=boot brya4es to kernel, no EC errors seen in cbmem log, EC software
sync still works.
Change-Id: I6e9858f29d079140ec43341de90f222b03986edb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Drawcia's MIPI camera sensor and VCM both share the same reset GPIO
from the PCH. The current power sequence does not take this into
account, and this leads to an unbalanced ref count of the reset GPIO,
which can cause one or the other of the devices to reset unexpectedly.
This patch corrects that by explicitly sequencing the reset GPIO for
both devices, which the builtin refcounting of this driver will
automatically handle.
BUG=b:214665783
TEST=Build, boot to OS and check VCM once camera stream off
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Ib676fd1f43dbd9cf75e4aff01baab4a4bb4e2a89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Current max count for camera power ops is 5 which is not sufficient.
If we increase the ops by 1 in current variants the compiler
will not throw error for intel mipi camera driver.
Hence increase current max count for camera power ops to 6 from 5.
BUG=b:214665783
TEST=Build and boot to OS
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I4f4c090f2275616816dfc697f27520cd1cbc1a80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61146
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch defines the following helper functions:
get_cpu_scaling_factor(): Returns scaling factors of big and small core.
cpu_is_nominal_freq_supported(): Returns true if CPU supports Nominal
Frequency, otherwise false.
cpu_is_nominal_freq_supported(): Check CPU supports nominal frequency or
not.
The patch also enables CPPCv3 support for Intel Alder Lake which is
based on hybrid core architecture.
TEST=Verified Nominal Frequency and Nominal Performance are getting
updated for ADL-P small and big cores correctly.
Signed-off-by: Sridahr Siricilla <sridhar.siricilla@intel.com>
Change-Id: I963690a4fadad322095d202bcc08c92dcd845360
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch implements ACPI CPPCv3 package. It implements and updates the
following methods:
generate_cppc_entries(): Updates method to support CPPCv3 package
acpi_get_cpu_nominal_freq(): Calculates CPU's nominal frequency
acpi_get_cpu_nomi_perf(): Calculates nominal performance for big and
small cores.
acpigen_write_CPPC_hybrid_method(): It generates ACPI code to implement
_CPC method.
acpigen_cppc_update_nominal_freq_perf(): It updates CPPC3 package if cpu
supports Nominal Frequency. It generates ACPI code which sets Nominal
Frequency and updates Nominal Performance. It uses below calculation to
update the Nominal Frequency and Nominal Performance:
Nominal Frequency = Max non-turbo ratio * cpu_bus_frequency
Nominal Performance = Max non-turn ratio * cpu scaling factor
CPU scaling factor varies in the hybrid core environment. So, the
generated ACPI code updates Nominal Performance based on the CPU's
scaling factor.
TEST=Verified CPPCv3 package is getting created in the SSDT table.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: ravindr1 <ravindra@intel.com>
Change-Id: Icd5ea9e70bebd1e66d3cea2bcf8a6678e5cc95ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Currently only PLD group is used to check USB port number. In the
future, we want to use custom PLD fields, so custom PLD should also be
considered when checking USB port number.
BUG=b:216376040
TEST=emerge-brya coreboot & SSDT dump in Brya test device
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Id8076a2a952de61a6f38fbdecd76e991487bf696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The corresponding mainboard design guide was used as a reference here.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie61af7dab35b560d2eec1ea62058f3a4dad5cb0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The SMU message response register was moved compared to Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie384de52b1efb1d52f9018315a4b72916a4c9cee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iac1b7308851c34bd1556c02af6b270e9346073e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The Sabrina SoC doesn't have the PM_ESPI_CS_USE_DATA2 bit defined in the
PM_SPI_PAD_PU_PD register. It also doesn't have a physical LPC interface
any more, so there are no LPC pins that can be reconfigured as eSPI
interface.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I02bc8d007901c71942475fe707637c5da7227230
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The CPPC feature isn't available on the Sabrina SoC, so drop the
corresponding code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71a1b0717571729ebca3600ac433e621cafc4e61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Also update mb/amd/chausie accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb4dcffa48c3dbdcffb66f1398b99ee96562efb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic0226afd9e7fffd6bf196f06ee6c34b6b9c92f30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There are no SATA controllers on the Sabrina SoC. The UPD field will be
removed later as a part of the initial UPD header update.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iedefd9f150e5bcb78173288e5fc9f1bbd6b498cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Some of the names have slightly changed in the PPR, but I kept the
current names for consistency across all AMD SoCs in coreboot. Revision
1.50 of the PPR #57243 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6bda656015858a57e221b8d7819f944c21564a39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The data fabric ID table in PPR #57243 Rev 1.50 has a different IOMS0
fabric ID than Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32890b5c03219f6ebf8180929d71ef726d382483
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since we don't need to support PCI ID remapping for finding the correct
VBIOS binary for the integrated GPU, graphics.c can be dropped for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd5b678f472b3b5888353efd057203eb641be874
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Sabrina is family 17h model A0h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01e02e3491fb90941c767058986da876bdf7ca1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Compared to Cezanne there are 3 more UART controllers. Revision 1.50 of
the PPR #57243 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I628b1a7a0930f3409acdcabda2b864d42bf6bd23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
The GPIO and GPIO MUX mapping as well as some GPIO to GEVENT mappings
have changed compared to Cezanne. Sabrina also doesn't have a remote
GPIO bank. Revision 1.50 of PPR #57243 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabb85a3d24c881055e94400d08d01505df44a07a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Compared to Cezanne there are 3 more UARTs controllers. The PCI
interrupt index table in the new SoC's PPR #57243 Rev 1.50 doesn't
contain a PIRQ mapping for UART4. The reference code has a mapping for
this and it uses PIRQ mapping index 0x77 for UART4 and not for I2C5.
Since the I2C5 controller isn't owned by the x86 side and I didn't see
any mapping of the I2C5 controller into the x86 MMIO space, this seems
very plausible. Also add the corresponding fields to the ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44780f5bc20966e6cc9867fca609d67f2893163d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Some SKUs of google/taniks have a Bayhub LV2 card reader chip,
therefore enable the corresponding driver for the mainboard.
BUG=b:215487382
TEST=Build FW and checking SD card reader register is correct.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I34adb122bd2edc343e894a53bc12e105f4225984
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Without acpi name, acpi_device_path will return NULL.
<NULL>: Intel USB4 Retimer at GENERIC: 0.0
Replace with usb4_retimer_scope for the identify.
BUG=b:215742472
TEST=show below meaasge in coreboot log
\_SB.PCI0.TMD0.HR : Intel USB4 Retimer at GENERIC: 0.0
\_SB.PCI0.TMD1.HR : Intel USB4 Retimer at GENERIC: 0.0
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idfa8b204894409b11936e5f221c218daa206cc02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
SSE is already selected by SSE2 through model_{1067x,6fx}/Kconfig
Change-Id: I3641118905f1fcc1e34d7fe4f7ca3082c3cf0d3b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SSE is already slected by SSE2 through model_6{e,f}x/Kconfig
Change-Id: Ibe215cfe6aa6d7c215dd62e1ab2966d079c2a78d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SSE is already selected by SSE2 through model_1067x/Kconfig
Change-Id: I7b16af0277dc01c5905c5990244d3738a33723b3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SSE is already selected by SSE2 through model_106cx/Kconfig
Change-Id: I31b8345fdd901e1d05df5fa8351db3255f9cf9cb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Icca870d1c97a2737dec3f31b0f2e4c3222c711ae
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ibbb6e6d44b1415b18aa59310f4d36d61b9a2a080
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use macros defined in <smbios.h> for 'ddr_type' and 'bus_width'
Change-Id: I0501147139387cd9b5c7ec6b7ba7f8a5c5bd18bb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
0x18 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x19 HYNIX 4GB LP4X H54G56CYRBX247
0x1a SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x1b HYNIX 8GB LP4X H54G68CYRBX248
BUG=b:165768895
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Change-Id: Ib1c09ff2b88bf121de702985680b2388c0fb8427
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add a dedicated memory mapping table starting at index 0x40:
0x40 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCR
0x41 HYNIX 4GB QDP LP4X H9HCNNNCPMALHR-NEE
0x42 MICRON 4GB LP4X MT53E1G32D4NQ-046 WT:E
0x43 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:A
0x44 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x45 HYNIX 4GB LP4X H54G56CYRBX247
0x46 SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x48 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCL
0x49 MICRON 8GB LP4X MT53E2G32D4NQ-046 WT:A
0x4A HYNIX 4GB QDP LP4X H9HCNNNCPMMLXR-NEE
0x4B Micron MT29VZZZAD9GQFSM
BUG=b:162379736
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I97f296cb8c35fd2f979a05d0b97a0562c1b472f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
When using the default initial core display clock frequency, Metaknight
has a rare stability issue where the startup of Chrome OS in secure mode
may hang. Slowing the initial core display clock frequency down to
172.8 MHz as per Intel recommendation avoids this problem.
The CdClock=0xff is set in dedede baseboard,and we overwrite it as 0x0
(172.8 MHz) for metaknight.
BUG=None
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Change-Id: I987277fec2656fe6f10827bc6685d3d04093235e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Init basic override devicetree based on schematics
BUG=b:211891086
TEST=FW_NAME="volmar" emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I40b364e3df2f04a6b828f4f288667b96b6e0bd22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:214890058
BRANCH=None
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I86acb172ed427d45973b9360e0413978cbd46645
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch drops the CSE common code block from getting compiled
in bootblock without any SoC code using heci communication so
early in the boot flow.
BUG=none
TEST=Able to build brya, purism/librem_skl without any compilation issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib4d221c6f19b60aeaf64696e64d0c4209dbf14e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Aligns with all other soc/intel/common platforms calling heci_init().
Test: build/boot Purism Librem 13v2
Change-Id: I43029426c5683077c111b3382cf4c8773b3e5b20
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61378
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:1100 for memory part K4AAG165WB-BCWE.
BUG=b:212507858
TEST=Generate new spd file and build coreboot.
Then boot from the DUT with new memory K4AAG165WB-BCWE
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I4e409a5a5a3b3d1b0013d2c020eeb4c0aeec51ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix the out-of-bounds read issue found by Coverity.
TEST=none
Signed-off-by: Jason Nien <finaljason@gmail.com>
Change-Id: I01e134cb6b025bf7cb5030cd9378297d7f6df509
Reported-by: Coverity (CID:1376956)
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58803
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit b67c5ed [3rdparty/fsp: Update submodule pointer to newest master]
updated the FSP binaries/headers for Comet Lake, which included a change
moving PcieRpHotPlug from FSP-S to FSP-M. Unfortunately the existing
UDP in FSP-S was left in and deprecated, which allowed the change to go
unnoticed until it was discovered that hotplug wasn't working.
Since other related platforms (WHL, CFL) share the SoC code but use
different FSP packages, add the setting of the PcieRpHotPlug UPD to
romstage/FSP-M and guard it with '#if CONFIG(SOC_INTEL_COMETLAKE)'.
Test: build/boot Purism Librem 14, verify WiFi killswitch operates
as expected / WiFi is re-enabled when turning switch to on position.
Change-Id: I4e1c2ea909933ab21921e63ddeb31cefe1ceef13
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Level should match that used in print_num_status_bits().
Change-Id: I1beb65e4c141e195dd59eaa2bf55fff6e7dc910d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jeff Daly <jeffd@silicom-usa.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This reverts commit 2bf2e6d1ccd87cdd8d9c189972eae89e47e542c8.
According to the latest schematics, Brask supports D3-Hot for RTL8125
and does not need to operate the ISOLATE pin.
BUG=b:193750191
BRANCH=None
TEST=emerge-brask coreboot chromeos-bootimage
Test with command suspend_stress_test
Change-Id: Ica6bfb810887861f6b17ff527373824547e2406c
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set register "reset_delay_ms" to 20 to reduce power resume time.
BUG=b:204009580
TEST=tested on kano
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ib0695edd7c342c65df9138b1590281c5f442769b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update Elan touchpad interrupt trigger to level low from edge low to keep consistency with Synaptics touchpad. Checked with Elan PM Iris and other projects(spherion), the touchpad can be set to edge or level low trigger.
Sepherion Elan touchpad IRQ setting: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.4/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi;l=415?q=mt8192-asurada.dtsi&ss=chromiumos%2Fchromiumos%2Fcodesearch:src%2Fthird_party%2Fkernel%2F
BUG=b:214143249
TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Elan and Synaptics touchpad wakeup from s0i3 well with proto build.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ifac49b131cadc1f8838bb6243ad6d17feb272bd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Update GPIO configuration to fix Synaptics touchpad can't wakeup system from s0i3.
BUG=b:214143249
TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Synaptics touchpad wakeup from S3 with proto build.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I29734595d37283adc6fd4a0ed17f51a5c9061796
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Add PCH ACPI Device ID for Alder Lake N SOC GPIO Controller.
Document: Alder Lake N Platform EDS Volume 1 (Doc# 645548)
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I6eb15751dd303b4b445cb64f25a040302e50c09d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Replace (1 << x) with BIT(x) in pmic_wrap.h.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I463589f02065a228a8af74447b4586e5b54e0b3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61351
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI config on Alder Lake
to instruct Pad Configuration Lock to use non-posted sideband writes as
posted write is not supported on Alder Lake while locking GPIO pads.
BUG=b:211573253, b:211950520
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id8d394b97de9c328b3f75df3649d7efc782f006b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch makes FSP-S skip unlocking the GPIO Pads.
BUG=b:211573253, b:211950520
TEST=FSP-S debug log below:
Without this change:
UnlockGpioPads= 1
With this changes
UnlockGpioPads= 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I236a19a67372e9668e304d0054d477daff6a0266
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch extends `struct pad_config` to add new variable for gpio
lock action.
Additionally, it creates new GPIO PAD configuration macros that perform
GPIO pad configuration and pad lock configuration as well.
List of new macros are:
1. PAD_CFG_NF_LOCK
2. PAD_CFG_GPO_LOCK
3. PAD_CFG_GPI_LOCK
4. PAD_CFG_GPI_TRIG_OWN_LOCK
5. PAD_CFG_GPI_GPIO_DRIVER_LOCK
6. PAD_CFG_GPI_INT_LOCK
7. PAD_CFG_GPI_APIC_LOCK
8. PAD_CFG_GPI_IRQ_WAKE_LOCK
Mainboard users can use the above macros to lock the PAD after
configuration.
So far on IA chipset, the default GPIO pad lock configuration reset
type is POWERGOOD hence, it's recommended as per GPIO BWG (doc: 630603)
to configure the GPP PAD reset type the same as lock configuration
reset type to avoid GPP reset value misconfiguration issue.
BUG=b:211573253, b:211950520
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibf8b0a845005ad545266d995449d0aa711f45a61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch performs GPIO PAD lock configuration in non-smm mode.
Typically, coreboot enables SMI at latest boot phase post FSP-S,
hence, FSP-S might get chance to perform GPP lock configuration.
With this code changes, coreboot is able to perform GPIO PAD
lock configuration early in the boot flow, prior to calling FSP-S.
Also, this patch ensures to have two possible options as per GPIO
BWG to lock the GPIO PAD configuration.
1. Using SBI message with opcode 0x13
2. Using Private Configuration Register (PCR)
BUG=b:211573253, b:211950520
TEST=Able to build and boot brya variant with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I71b4e2f24303b6acb56debd581bd6bc818b6f926
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60801
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For one specific type of APU, it doesn't have HDMI. When we detect
this APU, we need to explicitly disable HDMI in DDI settings,
otherwise the system would freeze.
get_cpu_count() == 4 && get_threads_per_core() == 2: This case is for
2 Core and 4 Thread CPU (2C/4T for short).
get_cpu_count() == 2: This is for 2C/2T. This is for a possible future case.
BUG=b:208677293
Change-Id: I8d0fa96818a768b7960d92821b927dbc622675ae
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
|
|
This code is common to at least all Zen-based APUs (Picasso, Cezanne,
Sabrina) and is also useful outside of the SoC-specific dynamic ACPI
table generation code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie96d4429fb6ed9223efed9b3c754e04052d7ca7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-by: Eric Peers <epeers@google.com>
|
|
There is no wakeup source when we test function of suspend and resume.
The root cause is that the monitor enable bit of PWRAP is not configured
correctly.
BUG=b:213255218, b:214978483
TEST=receive wakeup source from MT6366 successfully
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I324d18fa5d3cd745c35fcf0f207e1b444b5e898b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61330
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The VERSTAGE region is only needed when running verstage in the x86.
This change reduces the early ram size by 512 KiB when using PSP
verstage.
BUG=none
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I45ce421397807dbb1eb48aedd05209b91e89aa4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Reference test document, update tuning registers from pass experiment
setting of phy_settings.
The document about eDP tuning can be gotten from the issue tracker of
this ticket, at the issue tracker b/203061533#comment6.
BUG=b:203061533
Change-Id: I7aa8c594d9f5caa6b2523dac079aef89e623c56f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The FSP gets these values from the UPD and sets the internal values.
The document about eDP tuning is attached in issue tracker of this
ticket, at the issue tracker b/203061533#comment6.
BUG=b:203061533
Cq-Depend: chrome-internal:4303901
Change-Id: I9b85faac4f2fa1fb2c14bb85b615346d4379baac
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit bd9b044a96cc ("mb/system76: rtd3: Remove SrcClk pin
on CPU RP").
Previously, RTD3 expected a PCH index for the root port and did not work
with the CPU PCIe RP present on TGL, so SrcClk pin was disabled.
Set them now that RTD3 supports mapping the index for the CPU RP.
Change-Id: Ia7519b9f5a2be52cd5575615c28d20371a26996b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Update DPTF settings provided by thermal team
BUG=b:215033682
TEST=build and tested on taniks board
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ic6860980b06e876dd4c21af26752ab6c1a3f7fff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Taniks is going to exchange i2c port for touchscreen and cr50.
BUG=b:215039999
TEST=emerge-brya coreboot
Cq-Depend:chromium:3397562
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I179949887f6d8f4bbdff7d806319e2ac368ebc2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Taniks will use two PCIE port signals with one slot, one CLK and one
CLKREQ at next build. In order to accommodate this, probe statements
are added to the devicetree. This only affects NVME SSD and EMMC.
BUG=b:215040000
TEST=Build FSP with debug output enabled, and observe the correct root
ports being initialized depending on the FW_CONFIG values for BOOT_EMMC
and BOOT_NVME.
Cq-Depend:chromium:3397561
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I2ead505088f19fd3bf9768b541838395c82ef051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
In order to guarantee data integrity an expired TCO must not hard reset
the board. Select the Kconfig switch to prevent this reset.
Change-Id: I04080c6bcd486e3a406438cc7a703165bb6945a0
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The TCO timer is the default watchdog of an x86 host and can reset the
system once it has expired for the second time. There are applications
where this reset is not acceptable while the TCO is used. In these
applications the TCO expire event generates an interrupt and software
takes care. There is a bit in the TCO1_CNT register on Elkhart Lake to
prevent this reset on expiration (called NO_REBOOT, see doc #636722 ).
This bit can either be strapped on hardware or set in this register to
avoid the reset on expiration. While the hardware strap cannot be
overridden in software, the pure software solution is more flexible.
Unfortunately, the location for this bit differs among the different
platforms. This is why it has to be handled on soc level rather than on
TCO common code level.
This commit adds a Kconfig option where NO_REBOOT can be enabled. This
makes it easy to reach this feature over to the mainboard where it can
be selected if needed.
Change-Id: Iaa81bfbe688edd717aa02db86f0a93fecdfcd16b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Prepares compilation for x86_64 by avoiding casts to different sizes.
Current patch fixes:
1.
src/northbridge/intel/i945/raminit.c: In function 'ram_read32':
src/northbridge/intel/i945/raminit.c:77:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
77 | read32((void *)offset);
| ^
2.
src/northbridge/intel/i945/rcven.c: In function 'sample_strobes':
src/northbridge/intel/i945/rcven.c:29:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
29 | read32((void *)addr);
| ^
src/northbridge/intel/i945/rcven.c:30:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
30 | read32((void *)(addr + 0x80));
| ^
3.
src/northbridge/intel/i945/gma.c: In function 'intel_gma_init_lvds':
src/northbridge/intel/i945/gma.c:98:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
98 | (void *)pgfx, mmiobase, piobase, pphysbase);
| ^
src/northbridge/intel/i945/gma.c:359:25: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
359 | (void *)pgfx, hactive * vactive * 4);
| ^
src/northbridge/intel/i945/gma.c:360:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
360 | memset((void *)pgfx, 0x00, hactive * vactive * 4);
| ^
src/northbridge/intel/i945/gma.c: In function 'intel_gma_init_vga':
src/northbridge/intel/i945/gma.c:384:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
384 | (u32)mmiobase, piobase, pphysbase);
|
4.
src/northbridge/intel/i945/northbridge.c: In function 'mch_domain_read_resources':
src/northbridge/intel/i945/northbridge.c:64:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
64 | cbmem_topk = ((uint32_t)cbmem_top() / KiB);
| ^
Change-Id: I5ac7a1cb5d85a346114f909047d5a7c21ddb43e9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Chromebooks normally run with non-serial enabled firmware because
writing to the UART console is very slow. This unfortunately makes
debugging boot errors more difficult. We tend to rely on port 80s and/or
the vboot recovery code.
When CONSOLE_CBMEM_DUMP_TO_UART is selected it will dump the entire
cbmem console to the UART whenever `vboot_reboot()` is called. We don't
incur any boot time penalty in the happy path, but still retain the
ability to access the logs when an error occurs.
The previous implementation was using a hard coded UART index and
`get_uart_baudrate` was always returning 0 since `CONFIG_TTYS0_BAUD`
wasn't defined. This change makes it so the UART console properties are
available when CONSOLE_CBMEM_DUMP_TO_UART is set. This results in the
following .config diff:
+CONFIG_UART_FOR_CONSOLE=0
+CONFIG_TTYS0_BASE=0x3f8
+CONFIG_TTYS0_LCS=3
+CONFIG_CONSOLE_SERIAL_115200=y
+CONFIG_TTYS0_BAUD=115200
This functionality is especially helpful on Guybrush. PSP Verstage is
run on S0i3 resume. Today, if there is an error, the cbmem console is
lost since it lives in the PSP SRAM.
BUG=b:213828947, b:215599230
TEST=Build non-serial guybrush FW and verify no serial output happens in
happy path. Inject a vboot error and perform an S0i3 suspend/resume.
Verify CBMEM console gets dumped to the correct UART.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I997942204603362e51876a9ae25e493fe527437b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The FSP API is used to notify the FSP about different phases in the
boot process. The current FSP specification supports three notify
phases:
- Post PCI enumeration
- Ready to Boot
- End of Firmware
This patch attempts to make calling into the FSP Notify Phase APIs
optional by using native coreboot implementations to perform the
required lock down and chipset register configuration prior boot to
payload.
BUG=b:211954778
TEST=Able to build brya without any compilation issue and coreboot
log with this code changes when SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT
and SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE config enabled.
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia95e9ec25ae797f2ac8e1c74145cf21e59867d64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Since Tiger Lake platform, the HECI1 device can be disabled on
Alder Lake platform using two different mechanism:
A. Using PMC IPC command 0xA9.
B. Sending SBI message under SMM.
In current scope of Alder Lake the default implementation is using
(B) sending sbi message under SMM. A follow up patch to add the
possible options and let platform to choose the applicable one.
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
3. Default enable HECI1 device in `chipset.cb` to ensure the HECI1
device can undergo the PCI enumeration and later based on the
mainboard policy the HECI1 device can be disabled.
Mainboards that choose to make HECI1 enable during boot don't override
`DISABLE_HECI1_AT_PRE_BOOT` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie673e634fbc0bdece419c379d417b08dfb4819e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable EC keyboard backlight for volmar.
BUG=b:211891086
TEST=FW_NAME=volmar emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I24ec7c8ca770cb438aabcf16b252032eef6d734d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Update initial gpio configuration for volmar
BUG=b:211891086
TEST=FW_NAME=volmar emerge-brya coreboot
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I1bd3f1b3807b546d5a827ac89f0dc9bc8aaec40a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Add Alder Lake-N System Agent, PCIE, UFS, IPU and CNVI device IDs.
Document: Alder Lake N Platform EDS Volume 1 (Doc# 645548)
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I0a383816f818b794cf1211766c27937b3b8daa31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Enable PSE GBE with following changes:
1. Configure PCH GBE related FSP UPD flags
2. Add PSE GBE ACPI devices
3. Refactor PCH GBE FSP-S code and merge it together
with PSE GBE code
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: If3807ff5a4578be7b2c67064525fa5099950986a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The Intel® Programmable Services Engine (Intel® PSE) is a
dedicated offload engine for IoT functions powered by an ARM
Cortex-M7 microcontroller. It provides independent, low-DMIPS
computing and low-speed I/Os for IoT applications, plus
dedicated services for real-time computing and time-sensitive
synchronization.
The PSE hosts new functions, including remote out-of-band
device management, network proxy, embedded controller lite
and sensor hub.
This CL enables the user to provide the base address of the
PSE FW blob which will then be loaded by the FSP-S onto the
ARM controller. PSE FW will do the initialization work of
PSE controller and its peripherals. The loading of PSE FW
should have negligible impact on boot time unless PSE
controller could not locate the PSE FW and FSP will attempt to
redo PSE FW loading and wait for PSE handshake until it times
out. Once PSE controller locate the PSE FW, it will do
initialization concurrently by itself with coreboot booting.
It also adds PSE related FSP-S UPD settings which enable the
setup of peripheral ownership (assigned to the PSE or x86
subsystem) and interrupts. These assignments need to take
place at a given point in the boot process and cannot be
changed later.
To verify if PSE FW is loaded properly, the user could enable
PchPseShellEnabled flag and the log will be printed at PSE UART
2.
For further info please refer to doc #611825 (for HW overview)
and #614110 (for PSE EDS).
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Ifea08fb82fea18ef66bab04b3ce378e79a0afbf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Constructed out of a mix of autoport results, p8z77-m_pro, and
tool dumps.
Working:
- Core i7-3770K CPU
- SeaBIOS 1.13.0 boot to Linux 5.4.24 and Windows 10 1903
(all further tests are under these versions)
- USB2 / USB3
- SATA
- Gigabit ethernet
- CPU temp sensors (memtest86+ 5.0.1)
- Hardware monitoring under Linux
- Native and MRC raminit
- PCIe GPU in both "PCIEX16" slots (16x/4x, nVidia Quadro 600)
- Integrated graphics with Intel OpROM and libgfxinit (all ports)
- Serial port
- Windows with libgfxinit framebuffer
- 2ch sound playback, Linux and Windows
Not working:
- PS/2 mouse
- 6ch analog audio out
- PCI POST card in PCI slot
Untested:
- PS/2 keyboard
- Internal USB3 ports
- Digital audio out
Change-Id: If756e791ddce747cb1706414be8e41e83f88922b
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fast-k flow may need to re-init header because mrc_cache doesn't
store header. Storing header together with dparam data is better
for data consistancy.
TEST=fast calibration pass on Corsola
BUG=b:204226005
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I22982923dce06c9e770aa4f20f3dcd2f33685d84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Check for situations where a Type C device isn't useful and avoid
creating one for those scenarios.
BUG=b:215199976
TEST=Tested on brya; verified that USBC device is created.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Tested-by: Alyssa Ross <hi@alyssa.is>
Change-Id: I5e1598bd637ec9f50e7bf8dab9e3c757a30b9848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Compared to Cezanne there are 3 more UARTs controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id98767197a21cb1a61f54fc9b256b10a9506c791
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Compared to Cezanne there are 3 more UARTs with DMA controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a3d255bb4976a55623f3a161e791e80f1d01c69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Let's increase this to avoid losing any logs.
BUG=b:213828947
TEST=Boot guybrush and no longer see
*** Pre-CBMEM romstage console overflowed, log truncated!
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3258145e352af3a75893c7cc96f36eb238c99abb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Replace the Renoir/Cezanne PCI IDs with the Sabrina ones that were added
in commit 27b02c2eee68f4b6c8520c4737224aaaf81f137d (include/device/
pci_ids.h: add PCI IDs for AMD Family 17h Model A0h SoC).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I427df6f8e8c08fb47ae8513b6cf1085d4294e28f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
To have the new AMD Sabrina SoC code tested, add the AMD Chausie
mainboard as a copy of Majolica. This patch also changes the name from
Majolica to Chausie, selects the Sabrina SoC instead of the Cezanne SoC
and comments out the APCB_SOURCES since those aren't available in the
3rdparty/blobs repository yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic7b18f7a6ae5b8365234dd1227e0b1f7f37279da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Document #55758 Rev. 1.13 says that family 17h models 30h-3Fh and later
use the spi_readmode_f17_mod_30_3f struct element for SPI_MODE_FIELD and
spi_fastspeed_f17_mod_30_3f for SPI_SPEED_FIELD, so also use this for
The AMD Sabrina SoC which is family 17h models A0h-AFh.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I336f9ea4a0defdf34e1af4b6d568cfe46488f75e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The Cezanne SoC code was initially started as a copy of example/min86
which only provides enough code to make the SoC code build. Then the
different parts of the real SoC support was brought in patch by patch
which also helped cleaning up and untangling the code. Since the Cezanne
SoC code is now in a rather good shape and the Sabrina SoC is similar to
the Cezanne SoC from the coreboot side, the new SoC support is started
with a copy of the Cezanne code and all the needed changes will be
applied on top of that. In order for the build not to fail due to
duplicate files, this patch does not only copy the directory, but also
replaces most instances of the Cezanne name with Sabrina. Since the
needed blobs aren't available in the 3rdparty/amd_blobs repository yet,
the Cezanne blobs are used for now so that the build will succeed. As
soon as the proper blobs will be available in that repository, the code
will be switched over to use them.
As suggested by Nico, I added a "TODO: Check if this is still correct"
comment to the beginning of every copied file and all SOC_AMD_COMMON_*
Kconfig option selects which will be removed after re-verifying that
each file and each selected common code block is still correct for the
new SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I978ddbdbfd70863acac17d98732936ec2be8fe3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The AMD Sabrina SoC will be using the FSP driver to call into the
corresponding FSP binary to do its part of for the silicon
initialization, so we need an initial set of FSP headers for the AMD
Sabrina SoC code to build. Since the FSP interface for this SoC won't be
too different from the Cezanne FSP interface, we'll start with a copy of
the Cezanne FSP headers and update/replace them as soon as the proper
FSP headers for Sabrina will be available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib3bf50598efe60673b81cf99da491866fb5dc121
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add I2C bus for banshee in Kconfig
BUG=b:214871796
TEST=emerge-brya coreboot
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: I67592051b367d5a5715f8d1253ea0c11d2deb1c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|