summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-05-06soc/amd/common/espi: Don't set alert pin in espi_set_initial_configRaul E Rangel
The eSPI spec says that the Alert Mode defaults to in-band on reset. This change ensures the controller is in sync with the eSPI peripheral. The configured alert mode is configured in espi_set_general_configuration. BUG=b:187122344, b:186135022 TEST=Boot guybrush and make sure we don't get any eSPI errors. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib43e190d08d77ecfcd22ead2bf42e5de2202b555 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52953 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/amd/common/espi: Print set eSPI peripheral configRaul E Rangel
This will print the config we are setting on the eSPI peripheral. e.g., Setting general configuration: slave: 0x98a00000 controller: 0xe2000000 eSPI Slave configuration: CRC checking enabled Dedicated Alert# used to signal alert event eSPI quad IO mode selected Only eSPI single IO mode supported Alert# pin is open-drain eSPI 33MHz selected eSPI up to 20MHz supported Maximum Wait state: 0 BUG=b:187122344, b:186135022 TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1a2382d8ab3d3f0d14a139c57470cb895112eca9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52952 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/amd/{common/picasso}: Move pci_int.aslRaul E Rangel
We can share this with cezanne. BUG=b:184766519 TEST=Build picasso Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If746d55345f6b7c828376b64adc5532d20413f68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52916 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/amd/{picasso/common}: Move populate_pirq_data prototype to commonRaul E Rangel
This method signature will also be used by cezanne, so move it to common. BUG=b:184766519 TEST=Build picasso Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I421bdad51776278f83148174e6f72bdc38249e54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-06vc/amd/fsp/cezanne: Add AMD_FSP_PCIE_DEVFUNC_REMAP_HOB_GUIDRaul E Rangel
This HOB describes the PCI routing table. It will be consumed by coreboot to generate the _PRT ACPI object. BUG=b:184766519, b:184766197 TEST=Build guybrush Cq-Depend: chrome-internal:3794981 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib790004b88dfaf7671534f657c7735f6718114db Reviewed-on: https://review.coreboot.org/c/coreboot/+/52869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-06emulation/qemu-x86: Select BOOT_DEVICE_NOT_SPI_FLASHArthur Heymans
SPI flash is not emulated on these boards. Change-Id: If29a87441cb26e53c9814ed10ddcfe14752c3965 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52791 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06drivers/pc80/rtc/option.c: Constrain API to integer valuesAngel Pons
None of the options accessed within coreboot is a string, and there are no guarantees that the code works as intended with them. Given that the current option API only supports integers for now, do not try to access options whose type is 's' (string). Change-Id: Ib67b126d972c6d55b77ea5ecfb862b4e9c766fe5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-06src: Retype option API to use unsigned integersAngel Pons
The CMOS option system does not support negative integers. Thus, retype and rename the option API functions to reflect this. Change-Id: Id3480e5cfc0ec90674def7ef0919e0b7ac5b19b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-05-06include/console: Align ramstage Boot State Machine postcodesSubrata Banik
This patch ensures all boot state machine postcodes are in right order. Move POST_ENTRY_RAMSTAGE macro definition after POST_BS_PAYLOAD_BOOT. Change-Id: I9e03159fdf07a73f5f8eec1bbf32fcb47dd4af84 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52893 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06nb/amd/{agesa,pi}: Avoid overflows during DRAM calculationMichał Żygowski
Do not use get_dram_base_mask to calculate system DRAM limits. Shift operation around values operating on base and mask were causing overflows and thus incorrect system DRAM limit. Another function returning base and limit in KiB has been developed to avoid data loss. Keep DRAM high base and limit in calculations only for Trinity where the physical CPU address bits is 48. Although it is almost impossible to have a non-zero value there, the platform would have to support nearly 256GB of RAM. TEST=boot PC Engines apu1 2GB, apu2 4GB and apu3 2GB and boot Debian with Linux 4.14 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I3b5c1df96c308ff50c8de104e213219a98f25e10 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-06mb/google/octopus: add audio codec into SSFC support for BloogTony Huang
BUG=b:186380809 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Change-Id: I0975a8b64452c3f636e6c5937c6918518ec5b4e9 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-05-06mb/intel/adlrvp_m: Disable Type-C xDCIBernardo Perez Priego
Disabling this pci 0d.1 device since it is not required. TEST= Boot to OS. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Iccdf38111e3961ba887829abfa4146a9b37df9be Reviewed-on: https://review.coreboot.org/c/coreboot/+/52744 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06arch/x86/walkcbfs.S: Use FMAP instead of "cbfs master header"Arthur Heymans
Tested on qemu/i440fx on X86_64: - Page tables are found in cbfs (finding a file works) - returns 0 when a file is not found - works when there is no cbfs file at the start of the FMAP, e.g. with the cbfs master header removed. Change-Id: Ibab657cc40cd5c09c3a73c54950b98ac45a98dbf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52879 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06arch/x86: Always include walkcbfs.SArthur Heymans
Let the linker decide if this code is needed. Change-Id: I26fb19d461db39ce554af7b948f0d10a12920299 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-06mb/amd/majolica: Enable S0i3 by defaultJason Glenesk
Set s0ix_enable to true. BUG=b:178728116 TEST=Cold boot and perform a cycle of S0i3. Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: I808e78f41509cb03821513b5b63cc8856c891d8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-06Revert "soc/intel/xeon_sp: Fix devices list in the DMAR DRHD structure"Arthur Heymans
This reverts commit 8122b3f6123158024ed2844af17289a9abb98036. This broke DMAR. DRHD defines the scope of the device entries below. Change-Id: Iac4858f774fa3811da43f7697a9392daba4b4fba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-06security/tpm: Add option to init TPM in bootblockArthur Heymans
When using a hardware assisted root of trust measurement, like Intel TXT/CBnT, the TPM init needs to happen inside the bootblock to form a proper chain of trust. Change-Id: Ifacba5d9ab19b47968b4f2ed5731ded4aac55022 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51923 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/intel/tgl,mb/google/volteer: Add API for Type-C aux bias padsTim Wawrzynczak
TGL boards using the Type-C subsystem for USB Type-C ports without a retimer attached may require a DC bias on the aux lines for certain modes to work. This patch adds native coreboot support for programming the IOM to handle this DC bias via a simple devicetree setting. Previously a UPD was required to tell the FSP which GPIOs were used for the pullup and pulldown biases, but the API for this UPD was effectively undocumented. BUG=b:174116646 TEST=Verified on volteer2 that a Type-C flash drive is enumerated succesfully on all ports. Verified all major power flows (boot, reboot, powerdown and S0ix/suspend) still work as expected. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I70e36a41e760f4a435511c147cc5744a77dbccc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-06soc/intel/tigkerlake: Add IOM PCR PIDTim Wawrzynczak
Required for accessing IOM REGBAR space. Change-Id: Ic1c9beee69d184388f3e850744b3aeebe38eafbb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-06soc/intel/tigerlake: Add known CPU Port IDs for GPIO communitiesTim Wawrzynczak
Change-Id: I97c00e1985f319ff1db57314723d8405c2a6cbd2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-06soc/intel/common: Add CPU Port ID field to GPIO communitiesTim Wawrzynczak
The CPU can have its own Port IDs when addressing GPIO communities, which differ from the PCH PCR IDs. 1) Add a field to `struct pad_community` that can hold this value when known. 2) Add a function to return this value for a given GPIO pad. Change-Id: I007c01758ae3026fe4dfef07b6a3a269ee3f9e33 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-06soc/intel/tigerlake: Add known GPIO virtual wire informationTim Wawrzynczak
GPIO communities 0, 1, and 4 have virtual wire indexes & bits for at least some of their groups; add the known information into the community definitions. Change-Id: Icc4581e61ee904cbd998738962d360a58d24bc35 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52589 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/intel/common: Add virtual wire mapping entries to GPIO communitiesTim Wawrzynczak
Some SoCs may define virtual wire entries for certain GPIOs. This patch allows SoC code to provide the mappings from GPIO pads to virtual wire indexes and bits when they are provided. Also a function `gpio_get_vw_info` is added to return this information. Change-Id: I87adf0ca06cb5b7969bb2c258d6daebd44bb9748 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52588 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/intel/alderlake: Add CrashLog implementation for Intel ADLFrancois Toguo
This enables CrashLog for Intel ADL based platform. BUG=b:183981959 TEST=CrashLog data generated, extracted, processed and decoded sucessfully on adl-m RVP. Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Change-Id: I15ba0b41f73c1772f09584f13bcf5585caa90782 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52454 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05mb/google/dedede: Create pirika variantkirk_wang
Create the pirika variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:184157747 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_PIRIKA Signed-off-by: kirk_wang <kirk_wang@pegatron.corp-partner.google.com> Change-Id: I57bf33deeadacc88800f9ce1d3d54385ba56c798 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52626 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05soc/intel/alderlake: Add GPIO definition for CPU PCIe vGPIOMaulik V Vaghela
Adding GPIO definition for community 3 which is CPU reserved GPIO used by CPU side PCIe root ports. We did not have this definition since FSP used to program this GPIOs. Now, instead of FSP, coreboot programs CPU PCIe GPIOs for CLKSRC and lanes to put GPIOs in native mode. Thus adding definition of this virtual GPIOs in this CL. BUG=None BRANCH=None TEST=Check if correct registers are being programmed Change-Id: I481ea7e3ba948bf6d37b97d08c675a18ee68125d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-05soc/intel/common/block: Add definition for NAF_VWE bit for PAD_CFG0 regMaulik V Vaghela
Earlier we did not have definition for BIT27 for PAD_CFG0 register, we will use this BIT to enable "virtual wire messaging for native function" If this bit is enabled, whenever change is detected on the pad, virtual wire message is generated and sent to destination set by native function. This bit must be set while enabling CPU PCIe root port programming for ADL and thus defining a new macro to set native pad function along with NAF_VWE bit to make GPIO programming easier from coreboot. BUG=None BRANCH=None TEST=Code compilation works fine and if we use this macro to program GPIO, proper bit is getting set in PAD_CFG register Change-Id: I732e68b413eb01b8ae1a4927836762c8875b73d2 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52782 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05mb/google/guybrush: Configure Pen Detect deviceKarthikeyan Ramasubramanian
Pen Detect GPIO is exported through GPIO keys driver to the kernel so that stylus tools is popped on pen eject event. Hence enable the GPIO keys driver and configure the devicetree. BUG=b:186011392 TEST=Build and boot to OS in guybrush. Ensure that PRP0001 device is added to the ACPI SSDT table. Ensure that the Pen Eject events are detected. Event: time 1620159356.243180, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1 Event: time 1620159356.243180, -------------- SYN_REPORT ------------ Event: time 1620159356.735316, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0 Ensure that when the device is suspended, it wake on Pen Eject event and does not wake on Pen Insert event. Change-Id: I4d2aa29c0f1839c563b40734527a687a5618ba5c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-05soc/amd/cezanne/agesa_acpi: add add_agesa_fsp_acpi_table callFelix Held
this adds the ALIB SSDT that gets passed from the FSP to coreboot via a HOB. BUG=b:185481298 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8a7dae5789eee442b321ddf276494eb53fc5f499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-05mb/intel/adlrvp: Enable support for Chrome OS mode switchesAnil Kumar
Branch=none Test=build and boot ADL-M RVP. Test recovery mode using servo command dut-control power_state:rec Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I771f0ef14b1c273f9d1af22c96de0eabd08e9a8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52614 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05vc/amd/fsp/cezanne/FspGuids: add AMD_FSP_ACPI_ALIB_HOB_GUIDFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I531c8e8d0ee2aa72b51cba59e09e7a7d253da4f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-05soc/amd/cezanne/agesa_acpi: add and call agesa_write_acpi_tablesFelix Held
This function will be used to add some SSDTs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia88cb5ea483850a8659f3bae8040c82eb2735d26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-05soc/amd/picasso/agesa_acpi: add comment to add_agesa_fsp_acpi_table callFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I409993dcecd38bd2ad603ba467b299a6eab177ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/52901 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05soc/amd/picasso/agesa_acpi: add missing device/device.h includeFelix Held
agesa_write_acpi_tables has one struct device parameter. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7892cf680661253f74c3e291f5e9fb372e1d4ce3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-05soc/amd/common/fsp/fsp-acpi: add check for maximum table sizeFelix Held
If the ACPI table size in the HOB data header is larger than the maximum HOB payload, don't add the table at all and print an error instead, since in this case the memcpy would read past the end of the HOB data structure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I965c01bd9ab66b14d6f77b6f23c28479ae6d6a50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52897 Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05soc/amd/common/fsp/fsp-acpi: factor out SSDT from HOB functionalityFelix Held
This function will be reused in Cezanne, so move it from the Picasso directory to the common FSP integration code. TEST=On Mandolin Linux finds the AMD SSDT that contains ALIB. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7b256de712fe60d1c021cb875aaadec1d331584b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-05mb/google/guybrush: Fix S0i3/S3 GPIO configurationRaul E Rangel
Using PAD_WAKE is actually wrong. The wake bits are only supposed to be set when using the GPIO controller to wake the system. coreboot's current architecture relies on using GPEs to wake the system. BUG=b:186011392 TEST=Wake system from S0i3 with EC and see GPE 3 increment. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If7f9d2c13503c01fb9d834c436dac723f2c3b24c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-05drivers/intel/fsp2_0: Fix the FSP-T positionArthur Heymans
The only use case for FSP-T in coreboot is for 'Intel Bootguard' support at the moment. Bootguard can do verification FSP-T but there is no verification on whether the FSP found by walkcbfs_asm is the one actually verified as an IBB by Bootguard. A fixed pointer needs to be used. TESTED on OCP/Deltalake, still boots. Change-Id: I1ec8b238384684dccf39e5da902d426d3a32b9db Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-05soc/intel/xeon_sp: Remove bogus SMRAM lockingArthur Heymans
From tests this does not lock down SMRAM and it's also not possible to read back what is written, be it via PCI mmconfig or io ops. The FSP integration can be assumed to be bogus on this point. Change-Id: Ia0526774f7b201d2a3c0eefb578bf0a19dae9212 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51532 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05nb/intel: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. Change-Id: Ic92ecf8068f327a893d20924685ce571752d379f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52787 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05sb/intel/lynxpoint: Fix VBOOT with !CONFIG_INTEL_LYNXPOINT_LPArthur Heymans
The Intel Basking Ridge CRB does not have a Lynxpoint LP PCH but was using the lp gpio code instead of the southbridge/intel/common code in verstage. Change-Id: I775d3dc3540fbd8a939701d873183dd016e24ba4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-05soc/mediatek/mt8192: devapc: update domain remap settingNina Wu
Update domain remap setting to prevent DSP (domain 4) from accessing registers. Change-Id: Iefa9e75db85482a6c016b8b423c0b05f97e585b1 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05drivers/genesyslogic/gl9755: Disable debug mode to enable circuit protectionsBen Chuang
In order for short circuit protection and over current protection to work, the debug mode needs to be turned off. BUG=b:185749961 TEST=build and test Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: Iacfa3c668a52d1bae15fe82f1c614d0ebd93a957 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-05-05mb/intel/shadowmountain: Enable early EC Software SyncUsha P
BUG=None TEST=Build and boot to OS on shadowmountain. Ensure that the EC Software Sync is complete. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I8648db685d9c63ed1f2b3e599ca951d6648b7baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/52416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-05-05src/cpu/x86/smm: remove debug message; not thread safeRocky Phagura
This patch removes a call to console_init() and debug print message since the code is not thread safe. This prevents system hangs (soft hangs) while in SMM if user drops in a new SOC with more cores or another socket or as a result of bad configuration. Console is already initialized after the lock has been acquired so this does not affect any other functionality. Tested on DeltaLake mainboard with SMM enabled and 52 CPU threads. Change-Id: I7e8af35d1cde78b327144b6a9da528ae7870e874 Signed-off-by: Rocky Phagura <rphagura@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-05lib/coreboot_table.c: Remove unnecessary CPP useArthur Heymans
Change-Id: Ib93617867b946e208c31275d55d380aab7e51a50 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-05security/tpm/crtm: Measure FMAP into TPMArthur Heymans
FMAP is used to look up cbfs files or other FMAP regions so it should be measured too. TESTED: on qemu q35 with swtpm Change-Id: Ic424a094e7f790cce45c5a98b8bc6d46a8dcca1b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-05soc/mediatek/mt8195: Add mtcmos init supportWeiyi Lu
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: If7cd1f596f1406fa21d6586510e9956bb9846a6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek: Move the power domain data under each SoCWeiyi Lu
In follow-up patches, we need to set multiple power domains to power on the display and audio on MT8195. Move the power domain data under each SoC and make power_on() API to support multiple settings. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I8c3d19f1e9a4e516d674d68989ad509f37e5b593 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05mb/google/cherry: Add NOR-Flash supportRex-BC Chen
TEST=boot to romstage on MT8195 EVB Change-Id: I356e6b1cba3c078bf99e056b290476c7179e8ccf Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: Add NOR-Flash supportRex-BC Chen
TEST=boot to romstage on MT8195 EVB Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I450281fb4b1750e59cb76f6b2083f0e2889fd4cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/52875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: Add SPI driver supportQii Wang
Add SPI controller driver code. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Change-Id: I674763cdb0f338e123c121ede52278cfe96df091 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek: Move the common part of SPI drivers to common/Rex-BC Chen
The SPI drivers can be shared by MT8183, MT8192 and MT8195. TEST=emerge-{oak, kukui, asurada, cherry} coreboot; verified on Cherry P0 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7bb7809a88fbda67eca67ecfde45b9cb5f09dffe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05mb/google/cherry: Initialize pmif/spmi/pmic in romstageRex-BC Chen
Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I2eeddb44b5495d05602c995a6103a56b09cf126a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: add pmif/spmi/pmic driverRex-BC Chen
MT8195 also uses mt6359p so we can reuse most drivers. The only differences are IO configuaration, clock setting, and PMIC internal setting related to soc. Reference datasheet: MT6315 datasheet v1.4.2.pdf, RH-D-2019-0616. Reference datasheet: MT6359_PMIC_Data_Sheet_V1.5.docx, RH-D-2018-0205. Change-Id: I73f9c9bf92837f262c15758f16dacf52261dd3a3 Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05mb/google/puff/var/dooly: enable touchscreen wakeupTony Huang
Configure GPP_A20 as PAD_CFG_GPI_IRQ_WAKE to enable interrupt and wake routes for touchscreen device. BUG=b:186070097 BRANCH=puff TEST=Build and make sure TS works to wakeup suspend/resume. Change-Id: I2bbaab56924849a22a4d05ce53bf5bdcf00265dd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-05drivers/i2c/generic: Set S0W to D3hot for wake deviceTony Huang
If device is supported as a wake source, _S0W should be set to D3hot. This ensures that the device is put into D3hot by the OSPM. Power resource(PRIC) for the device is listed in both _PR0 and _PR3. Thus, it ensures that the OSPM does not turn off power resource when device is put into D0 and D3hot. Hence, it is capable of waking the system from D3hot state. However, if it is put into D3cold, then the power resource is turned off by the OSPM. The devices we are currently looking at for touchscreen/touchpad do not really support auxiliary power and so do not support wake from D3cold. BUG=b:186070097 TEST=build and check device wake state _S0W set to 3 in ssdt table. Change-Id: I34e4b2350875530d3337be700276bcc4fb1f810a Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-04security/vboot: Include fspt.bin in the RO region onlyArthur Heymans
fspt.bin is run before verstage so it is of no use in RW_A/B. Change-Id: I6fe29793fa638312c8b275b6fa8662df78b3b2bd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-05-04mb/google/dedede/var/cret: Modify reset setting for touchscreenDtrain Hsu
Modify reset pin setting to ACPI_GPIO_OUTPUT_ACTIVE_LOW for ELAN and Weida touchscreen. BUG=b:180547621 BRANCH=dedede TEST=Build the cret board and touchscreen is workable. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I912fe8a0e18a4c3527fb8587592b855c93b12406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-04mb/*/Kconfig: Drop select USE_OPTION_TABLEPatrick Rudolph
Only 4 mainboards selected to use the option table. Use the same default on all boards. Change-Id: Ia9ef88d5158a2b43f843c26b5b366a899dad8788 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-04soc/intel/alderlake: remove duplicate PL2 overrideSumeet R Pawnikar
PL2 override value is already declared under common code in power_limit.h file. Removing this duplicate PL2 override from soc specific header file. BRANCH=None BUG=None TEST=Built and tested on brya Change-Id: I1424f36fbe038d478f4b8f6257d78d4a3ede3258 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-04drivers/intel/fsp1_1: Remove verstage compilation unitsArthur Heymans
Only SOC_INTEL_BRASWELL is using FSP1.1. It has too little CAR available set up by FSP-T to have VBOOT_STARTS_IN_BOOTBLOCK and therefore verstage is not possible either. Change-Id: I54361c835055907c2a4414ec26a1495425d4ef09 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52785 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-04arch/x86: Fix building with CONFIG_VBOOT_SEPARATE_VERSTAGE=nArthur Heymans
TESTED on qemu/i440fx with VBOOT_SEPARATE_VERSTAGE commented out. Change-Id: I1227feab9ffbbc06e614f297be44fb67f13bda42 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52784 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-04mb/google/zork/vilboz: Disable HDMI 2.0 for VilbozFrank Wu
Disable HDMI 2.0 for Vilboz and then support display resolution 4K 30Hz BUG=b:179170193 BRANCH=firmware-zork-13434.B TEST=verified that the resolution of the display is 4K 30Hz Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ib0dc0d584f0e87bc9c3da85a583cb8c8bed76440 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-03mb/google/mancomb: Fix S0i3/S3 GPIO configurationRaul E Rangel
Using PAD_WAKE is actually wrong. The wake bits are only supposed to be set when using the GPIO controller to wake the system. coreboot's current architecture relies on using GPEs to wake the system. BUG=b:186011392 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib956fc299fe21cd7ea0b465cbdc5c8da830a668d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-05-03soc/intel/*: Update data types for variables holding PCH_DEVFN_* macrosTim Wawrzynczak
The usage of `pci_devfn_t` here is misleading, as these intentionally store the `PCH_DEVFN_*` macros so they can be used across `smm` and `ramstage` without requiring the device model. Update to `unsigned int` instead, as `pci_devfn_t` implies the data is an MMCONF-compatible PCI devfn offset. Change-Id: Ic8880de984e6eceda4cbe141e118f3a5fdd672a2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52808 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03device: Switch pci_dev_is_wake_source to take pci_devfn_tTim Wawrzynczak
With the recent switch to SMM module loader v2, the size of the SMM for module google/volteer increased to above 64K in size, and thus failed to install the permanent SMM handler. Turns out, the devicetree is all pulled into the SMM build because of elog, which calls `pci_dev_is_wake_source`, and is the only user of `struct device` in SMM. Changing this function to take a pci_devfn_t instead allows the linker to remove almost the entire devicetree from SMM (only usage left is when disabling HECI via SMM). BUG=b:186661594 TEST=Verify loaded program size of `smm.elf` for google/volteer is almost ~50% smaller. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4c39e5188321c8711d6479b15065e5aaedad8f38 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-03mb/intel/adlrvp: Increase RO/RW region size in chromeos.fmdMaulik V Vaghela
While building adlrvp board with chromeos.fmd and adding all chromeos related artifacts, RO region is running out of space. Also, we need to increase RW region size to accommodate all binaries and artifacts. Aligning chromeos.fmd with Brya will help in solving this issue, thus aligning chromeos.fmd with Brya. BUG=b:184997582 BRANCH=NONE TEST=Code compiles fine and able to boot adlrvp platform Change-Id: I644e2e5ba06d2b816d413a7cc9f5f248d8a6fee8 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52732 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03soc/amd/picasso/dmi.c: Fix builds for boards without Google ECNikolai Vyssotski
For CRBs without Google EC with CONFIG_CHROMEOS=y we will get a build error as google_chromeec_cbi_get_dram_part_num() is not defined. Use EC_GOOGLE_CHROMEEC instead of CHROMEOS to gate the call. BUG=b:184124605 Change-Id: I2b200f4fb11513c6fc17a2f0af3e12e5a3e3e5a1 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-03soc/intel/alderlake: Enable HWP CPPC support in CBravindr1
Kconfig change which enables the hwp cppc acpi support is to get the maximum performance of each CPU to check and enable Intel Turbo Boost Max Technology. BUG=none BRANCH=none TEST=check GCPC and CPC generated in acpi tables for each CPU Change-Id: I5d93774e8025466f1911cf77459910fe872bfcc8 Signed-off-by: ravindr1 <ravindra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51795 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03soc/intel/alderlake: Fill FSPM UPDs for VT-d configurationMeera Ravindranath
Update UPDs required for configuring VT-d. TEST=Boot to kernel, load ChromeOS VM. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I96a9f3df185002a4e58faa910f867ace0b97ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51849 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03nb/intel/common: Replace `_bar_clrsetbits_impl` macroAngel Pons
This macro contains a cast on the and-mask, which can suppress actual type overflow issues. Replace it with wrapper functions around the existing macros in device/mmio.h which still contain a type cast, but it is a non-issue because the wrapper functions now allow compilers to check for overflows. Change-Id: I975bf8152fc961767f0292bff4a03aecd8c65f56 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51886 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03nb/intel/common: Drop deprecated fixed BAR accessorsAngel Pons
Now that all code has been switched to make use of the new accessors, the old ones can be dropped. Follow-ups will clean up bitwise accessors. Change-Id: Ib4cb24ca71f3c3717ea50d147ddca74aaf0288fa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-03nb/intel/haswell: Move PEG registers to a separate headerAngel Pons
To keep the "main" haswell.h header short and simple, move PEG register definitions into a separate file, as done with most other registers. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ibfca00456115a4a0c861dd6738605214a7d43fd9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51891 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/common: Turn `*bar_{read,write}*` macros into functionsAngel Pons
These accessors were defined as macros in order to allow verifying the patches that replaced the accessors using BUILD_TIMELESS=1. Now that all replacement is done, turn the new accessors into static functions to let the compiler perform overflow checks on the arguments. Change-Id: Iaa2ba208fba11c4a00f2b8a05eb1129a32c6c092 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52816 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/haswell: Uniformize include guardsAngel Pons
Remove leading and trailing underscores and change `RAMINIT_H` to be more consistent with other headers. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ie20fcaa0f9393eb0a34054eda53b9bade63cc0d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51890 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/haswell: Clean up haswell.h headerAngel Pons
Drop unused chipset type macros, remove unnecessary guards and reorganize contents so that headers can be included at the top. Also drop the inclusion from ASL, as it is no longer necessary. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I6fcc0d428d0fdbf410bcbeb6ae4809870b7b498f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51889 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequencyWerner Zeh
All the boards in the patch have a constraint for the I2C bus to operate on 100 kHz. Provide dedicated values for rise time, fall time and data hold time on mainboard level to get a proper timing which takes the bus load into account. Giving these values the driver computes the needed timings correctly. TEST=Measure I2C frequency on all boards while coreboot accesses external RTC and make sure it is 100 kHz. Change-Id: Iab634190bda5fa2a4fdf2ebaa1e45ac897d84deb Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52721 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02mb/google/dedede/var/magolor: Support VBT for MagisterDavid Wu
Default VBT supports only integrated Display port. Magister supports a HDMI port and hence support a separate VBT for Magister. BUG=b:180666608 BRANCH=dedede TEST=Build and boot to OS. Cq-Depend: chrome-internal:3661227 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I52c10452887312959f68cfc4e25d5897dae388f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51279 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02soc/intel/cannonlake/include: Drop unused codeFelix Singer
`soc_vtd_resources` from the else-part is unused since Cannon Lake was removed. Thus, drop it and that if-else-condition. Change-Id: I21689d1eae6952a80c98096443e7506a1466c07e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-02soc/intel/skylake: Remove useless help textsFelix Singer
Remove useless help texts since they don't add any more value. Change-Id: Iabcaec1bc8abe2c4628105752e49247e946fcfe7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52786 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02soc/intel/cannonlake: Remove useless help textsFelix Singer
Remove useless help texts since they don't add any more value. Change-Id: Id8a15681a98ceb648814662545f5a3bf0f14b95c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52777 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02soc/amd/cezanne: add verstage filesKangheui Won
Add support for psp_verstage compilation. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Iac48c92a787adabfdaec96b6e8d2e24708d7e652 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-02vendorcode: add code for cezanne psp_verstageKangheui Won
These are mostly copied from picasso code with exception for bl_syscall_public.h. For some SVCs svc number and/or prototype has been changed. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I6b431fdbf34fca2747833980ae53c06244905f93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-01soc/intel/skylake: Add Kconfig option for LGA1151v2Timofey Komarov
Provide a SOC_INTEL_SKYLAKE_LGA1151_V2 option to select correct defaults for the combination of a Union Point PCH with LGA1151v2. As of the year 2021 it's common for motherboards with Z370, H310C or B365 PCHs, which are meant to be paired with Coffee Lake CPUs. Intel provides AmberLakeFspBinPkg to support this combination, which implements Intel FSP External Architecture Specification v2.1. Details: 1) Provide SOC_INTEL_SKYLAKE_LGA1151_V2 option that selects PLATFORM_USES_FSP2_1, SOC_INTEL_COMMON_SKYLAKE_BASE and SKYLAKE_SOC_PCH_H. 2) Add Amberlake FSP support. If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, use AbmerLakeFspBinPkg instead of KabylakeFspBinPkg. 3) Enable Coffee Lake CPUs support. If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, select MAINBOARD_SUPPORTS_COFFEELAKE_CPU. 4) Increase stack and heap size in CAR. If FSP_USES_CB_STACK is set (it's selected by PLATFORM_USES_FSP2_1), update DCACHE_BSP_STACK_SIZE and FSP_TEMP_RAM_SIZE values. 5) Update maximal number of supported CPUs. If MAINBOARD_SUPPORTS_COFFEELAKE_CPU is set, set MAX_CPUS to 16. Signed-off-by: Timofey Komarov <happycorsair@yandex.ru> Change-Id: I7b6b9c676da55088cb5a12a218ea58d349ee440c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-01soc/intel/skylake: Add microcodes for Coffee Lake CPUsTimofey Komarov
The Z370, H310C and B365 PCHs use the same silicon as 200-series PCHs and they are supported by soc/intel/skylake codebase (not by soc/intel/cannonlake). Mentioned PCHs are meant to be paired with Coffee Lake CPUs, so add the corresponding microcodes. Signed-off-by: Timofey Komarov <happycorsair@yandex.ru> Change-Id: I479c648e40c4c607d29f8cdd913fdbd6d7d7d991 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-04-30mb/google/brya: select GOOGLE_SMBIOS_MAINBOARD_VERSIONZhuohao Lee
Select GOOGLE_SMBIOS_MAINBOARD_VERSION allows querying board revision from the EC. BUG=b:186721096 TEST=1. emerge-brya coreboot chromeos-bootimage 2. flash the image to the device and check board rev by using command `dmidecode -t 1 | grep Version` Change-Id: I8eeb958f73607afb801794f91fbf91ec7bd5cd8b Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-30drivers/i2c/designware: Use safe defaults for SCL parametersKyösti Mälkki
Inspired by discussion in CB:22822. If I2C bus step response has not been measured, assume the layout to have been designed with a minimal capacitance and SCL rise and fall times of 0 ns. The calculations will add the required amount of reference clocks for the host to drive SCL high or low, such that the maximum bus frequency specification is met. Change-Id: Icbafae22c83ffbc16c179fb5412fb4fd6b70813a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52723 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google/mancomb: Add SPI configuration to KconfigMartin Roth
Mancomb will have the boot flash on a daughterboard, so the SPI speeds need to be low for now. BUG=b:182211161 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Icacb68d65fb414197d7b8d45799527d8d2568dc7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-30mb/google/guybrush: Remove the GPIO_SIGN_OF_LIFE codeMartin Roth
Guybrush is pretty definitely alive, so this can be removed, as the TODO line said. BUG=180721202 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I14f89f3e6f780c2da2136a838950ef2bcebc4c3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-30mb/google/mancomb: Remove lid swtichIvy Jian
There is no lid switch in mancomb so remove it. Will replace the lid switch with a fake gpio in depthcharge. BUG=b:182211161 TEST=Depthcharge no longer halts complaining that coreboot didn't sample the pin Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Ifd0fcec9557bf7ebad64ce9342d3b50eb511522b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-30soc/amd/common: Move external oscillator config away from commonKarthikeyan Ramasubramanian
The usage of external oscillator has got nothing to do with Audio Co-processor (ACP). Hence move it out of common config and put it into the SoC config where it is being used. BUG=None TEST=Build Dalboz and Vilboz mainboards. Change-Id: I8c5d98addfba750f9ddb87a846599541b4a8340a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-30mb/google/guybrush: update the telemetry settingChris Wang
Update the telemetry setting for guybrush vddcrvddfull_scale_current : 92165 #mA ddcrvddoffset : 412 vddcrsocfull_scale_current : 30233 #mA vddcrsocoffset : 457 BUG=b:182754399 TEST=Build, boot to guybrush Change-Id: Ib92bb169693634665fc8e165837e7ae3e6137bcf Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52736 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30amd/cezanne: Add telemetry setting to UPDChris Wang
Add telemetry setting to UPD, the value comes from the SDLE testing. BUG=b:182754399 TEST=Build & Boot guybrush Cq-Depend: chrome-internal:3787638 Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I9dd3643e9c582a41192130901935eef321b2c67e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52733 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google/mancomb: Add STAPM values to overridetreeChris Wang
Follow the FP6 IRM(#56328) to set the stapm parameter and allow other mancomb variants boards can customize those parameters. BUG=b:1181157669 TEST=build. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ib3ed76e5212a5a8b5fb4fcc3d6884ceff82377b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-30ACPI: Use acpigen for NVS OperationRegionsKyösti Mälkki
The intermediate base and length are not required in ASL. Change-Id: I0c72e2e4f7ec597adc16dbdec1fd7bbe4e41bfd6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51637 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google: Move ECFW_RW setting for non-ChromeEC boardsKyösti Mälkki
The boolean is stored in ChromeOS NVS, not GNVS. Change-Id: I5c424a052d484228a456f8f0ad4fb0bed3165e09 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-30vc/google/chromeos: Refactor GNVS initKyösti Mälkki
Move the support code for filling ChromeOS GNVS from acpi/chromeos-gnvs.c to vc/google/chromeos/gnvs.c. Change-Id: I7e92206561812eb3dc69739df49b6c3a93853858 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50612 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30soc/mediatek/mt8192: devapc: Add ADSP domain settingTinghan Shen
Configure ADSP domain from 0 to 4 and lock it to prevent changing it unexpectedly. TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: Ib938ba05e8d0342572c57366c97ebb0185da8aba Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52728 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google/dedede/var/galith: Support Wifi SAR for DVT phaseFrankChu
Because galith/gallop both non-suport tablet mode, remove un-use fw_config conditional. BUG=b:176206495 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ic9bb76c207ef033f81ecdd57849535b8ac8d13ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/52565 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 09:52:36 +0000