| Age | Commit message (Collapse) | Author |
|---|
|
The board uses soldered down LPDDR4, so process their SPD files, and add
the SPD for Micron MT53E512M32D1NP-046WTB provided by Micron.
Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
Change-Id: I978b7450b106b86eef322df8b33df41e038599eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77349
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
Configure the AUX pins as NC based on the FW_CONFIG setting when
the C1 port is not present.
BUG=b:294456574
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I24fb8f16c2e3b05edf1056b5687ae5ea28c022c0
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Restore TPERST_HIGH to 160ms since it has beed validated in other
OEM projects and haven't heard any issue so far.
This change back commit d710c6d5a773 ("mb/google/nissa/var/yavilla: Adjust WLAN_PERST_L power sequence").
BUG=b:295277868
TEST=emerge coreboot
boot to system and check wifi connection is fine
Change-Id: Ifc66e596fc7b6efdc0c286ee187969c8774bdc80
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently pirrha's digitizer pen uses GPP_F12 for I2C HID interrupt
signal. But its IRQ number is the same as GPD2, which is used as
EC_SYNC_IRQ.
It caused EC driver loading error from dmesg:
cros_ec_lpcs GOOG0004:00: Failed to request IRQ 98: -16
cros_ec_lpcs GOOG0004:00: couldn't register ec_dev (-16)
cros_ec_lpcs: probe of GOOG0004:00 failed with error -16
So change the digitizer pen interrupt type to GpioInt to prevent
the conflict.
BUG=b:292134655
TEST=Verified EC driver reported no error and pen device worked
Change-Id: Ieb88e87fcfb06544a4b5b5133b752aa821fab76a
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77346
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on schematics and gpio table of pirrha, generate overridetree.cb
to configure internal devices and generate fw_config.c to override
GPIO configurations following FW_CONFIG.
BUG=b:292134655
TEST=FW_NAME=pirrha emerge-nissa coreboot chromeos-bootimage
Change-Id: I91013b0ad89e26f0a4c433c305c6b883d000f042
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77116
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jimmy Su <jimmy.su@intel.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Idd6f711f5ca5c8a421c0c38edd404b1900bb29b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76497
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for Intel WIFI-7 series PCIe based WLAN module.
Change-Id: Ia31fdb87e15b50471dc7664e42b1e2625ce1ac58
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Convert camel case macros to uppercase and underscore separated macros,
such as:
PCI_DID_CyP_6SERIES_WIFI -> PCI_DID_CP_6SERIES_WIFI
PCI_DID_TyP_6SERIES_WIFI -> PCI_DID_TP_6SERIES_WIFI
This makes the macros more consistent with the rest of the code and
easier to read.
Change-Id: I9c739aab93dc0d043a3c9d9ce799087952c1e20b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77644
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch refactors the existing MRC cache storing logic, which was
spread between the ROM and RAM stages, into a single early MRC cache
store stage. The only exception is when SoC user selects
FSP_NVS_DATA_POST_SILICON_INIT to store MRC cache from ramstage (after
FSP-S).
It reverts all the boot-state logic previously used to locate and store
MRC cache from NVS HOB into NVS because majority of the platform can
potentially use the early MRC cache store with improved memory caching
at the pre-RAM phase (with the ramtop implementation).
The only exception is the Xeon SP platform, which currently locates
the MRC cache post in FSP-S (at ramstage). Therefore, this patch
provides an API to the FSP 2.x silicon init code to perform late
storing of the MRC cache.
In majority cases the updated logic, the romstage (post FSP-M) will
attempt to save the MRC cache. Platform that selects
FSP_NVS_DATA_POST_SILICON_INIT config performs the same operation post
FSP-S. Depending on whether the MRC_STASH_TO_CBMEM config is
enabled, the MRC cache will either be written directly to NVRAM at the
romstage or stashed into CBMEM for a late NVRAM write at ramstage.
Below table captures the change in the boot state w/ and w/o this
patch for storing the MRC cache. Overall the goal is to ensure the
platform behavior is remain unchanged before and after this patch.
w/o this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | BS_DEV_INIT | BS_DEV | BS_DEV |
| DATA_POST | CHIPS_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | BS_PRE | BS_DEV | BS_DEV |
| w/o above | DEVICE_ENTRY | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
w/ this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | Post FSP-S | BS_DEV | BS_DEV |
| DATA_POST | (ramstage) | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | Post FSP-M | BS_DEV | BS_DEV |
| w/o above | (romstage) | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
BUG=b:296704537
TEST=Able to build and boot google/rex without any boot time impact.
Change-Id: Id1e91d25916594f59d1e467a142f5042c6138b51
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77556
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I639fb1e911a7449d0db0d2bfcfbb6f4f225b0cef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Specify the default path to, and automatically include the FSP binaries
needed to boot a board if USE_AMD_BLOBS is selected. Simplifies board
configs, and matches use in previous patforms.
TEST=build/boot google/skyrim
Change-Id: Ic837d264327723c8dc18a60fb16e8d41fe38b44e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77625
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Automatically include the FSP binaries needed to boot a board if
USE_AMD_BLOBS is selected. Simplifies board configs, and matches
use in soc/amd/picasso.
TEST=build/boot google/guybrush
Change-Id: I5b6e34085410a2aafe5d7876be5097f28f521ce8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77624
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch renames `SAVE_MRC_AFTER_FSPS` config to
`FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon
SP FSP implementation, where the FSP Silicon Init API produces
Non-Volatile Storage (NVS) instead of the FSP-Memory Init API.
According to the FSP 2.x specification (section 11.3), the FSP
populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and
expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB
after the FspMemoryInit() API in API mode.
However, not all Intel SoC platforms that support the FSP 2.x
specification adhere to this requirement. For example, the FSP binary
for XEON SP platform produces NVS data (aka
FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API.
Therefore, attempting to locate NVS data after the FspMemoryInit() API
on these platforms would result in an error. The `save_mrc_data.c`
implementation provides the required hooks to locate the NVS post
FSP-Silicon Init and store into Non-Volatile Storage.
BUG=b:296704537
TEST=Able to build and boot Intel Xeon SP w/o any functional impact.
Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Setting SaGvWpMask to SAGV_POINTS_0_1_2 in dev tree can effectively
avoid the idle hang issue, but it will affect the system power.
(Before root cause, this is a short term workaround to unblock function test.)
BUG=b:287170545
TEST=Able to idle for more than 5+ hours without any hang.
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Change-Id: I0947815ab79b470d2ae922cffdd8250c60cf1afd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77520
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
|
|
BUG=b:294155897, b:295112765
TEST=emerge-rex coreboot
Change-Id: Ic7e272a484ea76dfc3a314b3597cbc18c856a9ca
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add audio codec ALC5650 related settings.
BUG=b:294155897, b:295112765
TEST=emerge-rex coreboot
Change-Id: I2b54dd600b47ecdfd1f488a8c623bc0599c8936f
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77360
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
With the introduction of a new Linux version a problem has appeared
after a software initiated reset via CF9h register. The problem
manifests itself in the fact that the Linux kernel does not start after
the reboot. The problem is solved by setting bit 3 to 1 in Reset Control
Register (I/O port CF9h). This leads to the fact that the PCH will drive
SLP_S3 active low in the reset sequence. It leads to the same behavior
as in commit 04ea73ee78bc ("siemens/mc_apl3: Set Full Reset Bit into
Reset Control Register") explained.
Change-Id: Ibc6d538c939e38732f42995d5ec6c8b61f979a6a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77603
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As a preparation for WiFi SAR table addition, adding hook for it.
BUG=b:291155207
TEST=emerge-rex coreboot
Change-Id: Ia313cfddec278e6bf8498407b242c027a5891deb
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77598
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add FP_MCU definitions for fw_config according to the current
build matrix.
BUG=b:291155207
TEST=emerge-rex coreboot
Change-Id: Id67b20a750d14eb23c62be9a30a5ef21d80e486a
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Remove SD_ABSENT since it's not being used, and CBI FW_CONFIG
in current build does not reflect this config neither.
BUG=b:291155207
TEST=emerge-rex coreboot
Change-Id: Icfa472ff5570ac728038ec67a762289407760812
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77596
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support Weida WDT8790A touchscreen.
BUG=b:297453122
BRANCH=firmware-brya-14505.B
TEST=touchscreen is workable and evtest shows WDHT2601
$evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Lid Switch
/dev/input/event1: Power Button
/dev/input/event10: sof-cs42l42 HDMI/DP,pcm=2
/dev/input/event11: sof-cs42l42 HDMI/DP,pcm=3
/dev/input/event12: sof-cs42l42 HDMI/DP,pcm=4
/dev/input/event13: sof-cs42l42 HDMI/DP,pcm=5
/dev/input/event2: AT Translated Set 2 keyboard
/dev/input/event3: cros_ec_buttons
/dev/input/event4: Elan Touchpad
/dev/input/event5: WDHT2601:00 2575:0921
/dev/input/event6: WDHT2601:00 2575:0921 Stylus
/dev/input/event7: WDHT2601:00 2575:0921 Stylus
/dev/input/event8: DELL Dell USB Entry Keyboard
/dev/input/event9: sof-cs42l42 Headset Jack
Change-Id: If9539afaf891c8352bc7fc8e548fd77ea57ea6ca
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77575
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I179df1e0e544783f77a485ad08293530e8a86ecd
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77592
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add intel wifi sar table for yahiko
BUG=b:298280621
BRANCH=firmware-nissa-15217.B
TEST=build, enable iwlwifi debug option, and check dmesg
Change-Id: I38d2e640fc2f7cbde3986474ca1bf7de9b2d25b4
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77585
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add variant of NAU8318(SPK) + NAU88L25B(Headphone) audio support
on brya and skolas board.
In fw_config settings, reuse max98360_enable_pads[] due to
identical i2s configurations as nau8318.
In addition, separated GPP_R7 as SPK_BEEP_EN pin.
BUG=b:236561637
TEST=emerge-brya coreboot
BRANCH=none
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Suggested-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Change-Id: Ife47a83fca902cf63e09d11206e9d99fac0dc9a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch ensures that the VR configuration for IA, SA, and GFX is
properly initialized, assigning zero values to VR causes a black screen
(no display) issue.
Problem Statement:
Override CEP (Current Excursion Protection) value with zero aka set to
disable results into black screen issue (no display).
Solution:
Keep CEP default enabled and don't override w/ zero value.
w/o this patch:
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[0] : 0x0
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[1] : 0x0
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[2] : 0x0
w/ this patch:
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[0] : 0x1
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[1] : 0x1
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[2] : 0x1
Change-Id: I8908e8b6c995390b559212d456db6ddf984448a3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
All of the SoCs in the cannonlake directory select the following
options. So move them to the common option SOC_INTEL_CANNONLAKE_BASE
in order to deduplicate selections.
* FSP_USES_CB_STACK
* HAVE_INTEL_FSP_REPO
* SOC_INTEL_CONFIGURE_DDI_A_4_LANES
Change-Id: I6ce5edb2ba2c138b44601b32c3ecba2e761136f7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77447
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Intel Cannon Lake was removed with commit d456f65056. Thus, remove this
dead code.
Change-Id: I53cd9d53b01e26f530684aa9c404f50b305c1f54
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ic49cb6c67aa707efa6495788137b550683008868
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add SA_DEV_SLOT_GNA definition to SoCs missing it, so the name
resolves properly.
TEST=tested with rest of patch train
Change-Id: I31c8b14e5083fc8e212a4e32330125fa72696c73
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Allows boards which enable the GNA device to provide an attachment
point for the OS drivers.
TEST=tested with rest of patch train
Change-Id: I3398eefb80e4407594883dd39128cd7885105ac3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Remove MAILBOX word from CPU_CRASHLOG_MAILBOX_WAIT_STALL
and CPU_CRASHLOG_MAILBOX_WAIT_TIMEOUT macros, because they
can be used for other interface as well.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: I62b04fa4b05c427db494a536ca6504db02dfeb68
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77236
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Region with metadata tag contains information about BDF entry for
SOC PMC SRAM and IOE SRAM. We don't need to parse this as we already
define BDFs in soc/pci_devs.h for these SRAMs. Also we need to skip
to region as it does not contain any crashlog data.
BUG=b:262501347
TEST=Able to build google/rex. Able to trigger crashlog and decode
correctly.
Change-Id: Id8ed40b865cde8e89045f5c9e713398fcbff5890
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76834
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When parsing descriptor table the record can have tag type = 7.
This tag contains metadata depending on SOC. The platform may
choose to parse it based on implementation of crashlog.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: I60dda06950974f7949fa5635141e4b7798c4d1f2
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
CPU crashlog discovery table and crashlog record is considered
invalid if first 32bits of the table is either 0x0 (no crashlog)
or 0xdeadbeef (invalid crashlog).
Crashlog record is considered consumed if bit 31 is set. So in this
case stop processing the subsequent records.
BUG=b:289600699
TEST=Able to build and verified invalid records are skipped on
google/rex.
Change-Id: Ia81bd293a533217425e44473ae85b2115c85faf6
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76333
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CPUID CPUID_METEORLAKE_B0 onwards the discovery table offset needs
to be left-shifted by 3.
Reference: EDS Vol 1 (640228)
BUG=b:289600699
TEST=Able to boot google/rex with crashlog enabled.
Change-Id: I90647fb6190a52b42298398263978beaf931b035
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Allow the use of 64bit MMCONF base in MCFG table.
Previously only 32 bits were utilized for MMCONF base, while the
remaining 32bits were reserved & held value of zero as evident from MCFG
table disassembly. This commit entails updating the 'base_address' field
in the 'mmconfig' structure to 64 bits and removing the 'base_reserved'
field.
TEST=Confirmed the functionality of the 64bit MMCONF base in the MCFG
table disassembly below
Signature : "MCFG"
Table Length : 0000003C
Revision : 01
Checksum : BD
Oem ID : "COREv4"
Oem Table ID : "COREBOOT"
Oem Revision : 00000000
Asl Compiler ID : "CORE"
Asl Compiler Revision : 20230628
Reserved : 0000000000000000
Base Address : 0000001010000000
Segment Group Number : 0000
Start Bus Number : 00
End Bus Number : FF
Reserved : 00000000
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: I2f4bc727c3239bf941e1a09bc277ed66ae6b0185
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77539
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I25807e116869d1bd7b8324525bc5ae1691e072e4
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77601
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a dummy soc (genoa) based on EXAMPLE_MIN86 with
amd linker script hooked up.
Default to 64bit code as that will be a sensible default for this
platform (high memory access required for RAS setup).
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I69253466084d17c4359d7e824d69f12490b076e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76495
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This board will use custom MP2 FW to dump the contents of the STB when
the SOC fails to enter/exit S0i3. Enable `PSP_LOAD_MP2_FW` by default.
BUG=b:259554520
TEST=Built and ran on skyrim device, verified that MP2 FW loads.
Change-Id: I4222521d01e2c98708f0e5b6693a8aee9e59edf2
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72118
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Older FSP releases don't have an option to do MP init via PPI, so it
should not be visible.
Change-Id: I74b4bd5dd72980b859763e89ead7d7f619321e66
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63759
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates rex ES variant with EC ISH enabled.
BUG=b:296886409
TEST=Able to build and boot rex4es_ec_ish variant.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: I2b1cdb8cffd66badd90a7bf9825d9decb07941a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This update 'input-event-codes.h' file to master branch.
Change-Id: I09839886824868cfaff6127fe44ff02d7e21ba42
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
With the Tc-cold handshake, there's a fast flicker when connecting
external displays. With it disabled, it's just one "flick", so use
this as it's lesser of two evils.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie42b935d3e69beff6a1e503a8dee69554123b4f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add support for FSP ASPM and Clock PM configuration based on Kconfig
options: PCIEXP_ASPM, PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE. For some
use cases it may be desirable to disable ASPM and Clock PM to achieve
more deterministic and higher performance of PCIe devices.
TEST=Boot MSI PRO Z690-A DDR4 without ASPM and Clock PM. Confirm all
PCIe devices are still working and ASPM and Clock PM capabilities
are not present on the PCIe Root Ports.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6d9d11016bed89dcfee6909d0d3e3e2e56237a2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69825
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The amdfw.rom is mostly in region COREBOOT. Calculate the relative
address as the CBFS module address. That is for future 32M flash size
support.
TEST=binary identical test on amd/birman amd/majolica amd/gardenia
amd/mayan amd/bilby amd/mandolin amd/chausie amd/pademelon
pcengines/apu2
google/skyrim google/guybrush google/zork google/kahlee google/myst
This commit is part of a series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: I2add8e4e6755e582b3be6a150cf83d1468f2f1be
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72961
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is based on work by Arthur Heymans, 69852.
Get rid of the confusing "position index" and use the relative flash
offset as the Kconfig setting instead.
TEST=binary identical on amd/birman amd/majolica amd/gardenia
amd/mayan amd/bilby amd/mandolin amd/chausie amd/pademelon
pcengines/apu2
google/skyrim google/guybrush google/zork google/kahlee google/myst
(The test should be done with INCLUDE_CONFIG_FILE=n)
Change-Id: I26bde0b7c70efe9f5762109f431329ea7f95b7f2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update header files for FSP for Meteor Lake platform from 3292.83
to 3323.84.
The patch changess only a few spacing alignment for FSP-M header and
added few PPR (Post Package Repair) related variable for MemInfoHob
header.
BUG=b:297965979
TEST=Able to build and boot google/rex.
Change-Id: I65c6e05256a2ae9516449dbce62affd040cb0e56
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77561
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add FW_CONFIG probe for absent FIVR bypass mode on peezer.
BUG=b:296982082
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
Change-Id: I0b2053b2d732fd9462686ed7b0c9225539b28fb2
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77396
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the schematic, set below GPIO to NC:
1. GPP_C18
2. GPP_C19
3. GPP_S04
4. GPP_S05
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: If1f847d2db83b63a351203f0449cc1368bef27f4
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77558
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The Genoa SoC supports MMIO addresses larger than 48 bits. Since the
MMIO base and limit registers in the data fabric only contain bits 16 to
47 of the MMIO address, the MMIO address extension register is
introduced on some SoCs like Genoa. This additional register contains
the upper bits of the MMIO base and limit. Since it's not available on
all SoCs, introduce the SOC_AMD_COMMON_BLOCK_DATA_FABRIC_EXTENDED_MMIO
Kconfig option to select the correct data_fabric_get_mmio_base_size
implementation to be added to the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic304f5797bc5661c1d511c95e457c6dde169d329
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77514
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Add HDMI GPIO configuration to early GPIO list to support
VGA text o/p in Pre-RAM stage on HDMI.
BUG=b:279173035
TEST=If CONFIG_UGOP_EARLY_GRAPHICS is set to y, check SOL
text on HDMI during Pre-RAM boot stage.
Change-Id: I13691850d09a442d5d5493a2b1dcf1145cf9797a
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch sets the Fast V-Mode (FVM) configuration parameter as
suggested in Intel doc 640982. As per the doc, Intel MTL-U 15W CPU
supports FVM on IA and SA.
Fast V-Mode (FVM): Intel Meteor Lake introduces the ability to manage
the peak power events it calls "reactive peak power management".
The Fast V-Mode is one such technique to perform the reactive peak power
management. It relies on the detector integrated inside the processor
which senses when the processor load current exceeds a present threshold
by monitoring the processor power domain IMVP (Intel Mobile Voltage
Positioning) VR sense point.
The baseline ITRIP for IA is 66A and 21A for SA.
BUG=b:286809233
TEST=Able to build and boot google/rex without seeing any performance
regression.
Change-Id: Ia7157bddf2e9586e4a91cc55e48693561072cd05
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75763
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Collect SPD data from DIMMs and memory-down, and find the common
supported settings.
Original-Change-Id: I4e6a1408a638a463ecae37a447cfed1d6556e44a
Original-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I7948554eb02113bdca380222a11cfb322f9615f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
KBL_STATE was originally intended to provide more granular control
of the keyboard backlight. However, KBL_BRIGHTNESS has a valid value
of "off" which achieves the same thing.
Therefore, unconditionally set the KBL_STATE to enabled, and rely on
KBL_BRIGHTNESS.
Change-Id: Ic7ee6b96b1dcaa6633b111e92097bce87908885e
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77201
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds option to override Fast Vmode on Meteor Lake SoC.
This requires CepEnable, EnableFastVmode, IccLimit FSPM UPDs in FSP
header. If the hardware supports Fast Vmode, the FSPM will set the
ICC limit value to the value passed from coreboot.
With CepEnable and EnableFastVmode enabled, if IccLimit is not
specified by coreboot, FSPM sets IccLimit as default value. If no
values assigned to all the three CepEnable, EnableFastVmode and
IccLimit, coreboot sets their values to 0 and Fast Vmode is disabled.
BUG=b:286809233
TEST=In debug MTL FSP logs, the value of FSP parameters is as passed
from coreboot including enable_fast_vmode, cep_enable, and
fast_vmode_i_trip. Also, fast_vmode_i_trip value is passed to pcode
using mailbox command without any error. This test done on google/rex
board.
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: Id05dccac56c504523f9327babe0c6fbeff488ec2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75566
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Karis use MIPI camera only, remove related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I96316d63c068c48b5bec75d3b4c5444d15fd985f
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77510
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
According to the schematic, karis does not have a SAR sensor. Update
GPIO settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ib3b66b9594f2d0fddbbfc56e99f06b6587487f2a
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Follow schematic, set GPP_D04 to NC.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ie222a2773ff7d2b87641f55b4d37ff3bdf761cd2
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
enable GL9750 invert WP function
BRANCH=none
BUG=b:297244291
TEST=emerge-rex coreboot
Change-Id: I7fdc94b5ca6b316ee0291c38e39c5f8b08cbc127
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77414
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add an option to invert write protect polarity for GL9750.
Change-Id: I5761f3066291a2400caecbecc79ae893f0a0c146
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77403
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The !CONFIG_SOC_AMD_COMMON_BLOCK_APOB_NV_DISABLE comment was likely a
copy-paste leftover, so remove it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45b12d1dc5af84be99d54fea0c9ccf610cf5dae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This reverts commit 5013c60a871af8fbce8c38a1c342c454e5b8452f.
Reason for revert: consecutive reboots are causing kernel panic.
BUG=b:297153853
TEST=Able to perform 50 cycles of consecutive reboot after reverting
this CL and it boots to the OS every single time(w/o any kernel panic).
Change-Id: If6c96dcc62c706a522b98a1cf1dd1920ad6473a1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77467
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds logic for logging the FW splash screen event to
the event log.
There could be three possible scenarios as below:
1. Platform w/o FW splash screen (i.e., either HAVE_FSP_LOGO_SUPPORT
or BMP_LOGO configs not enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) not
present in the event log.
39 | 2023-08-27 12:42:54-0700 | System boot | 12
40 | 2023-08-27 12:42:54-0700 | ACPI Wake | S5
41 | 2023-08-27 12:42:54-0700 | Wake Source | Power Button | 0
2. Platform w/ FW splash screen (i.e., both HAVE_FSP_LOGO_SUPPORT
and BMP_LOGO configs are enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
enabled in the event log.
34 | 2023-08-27 12:07:29-0700 | System boot | 11
35 | 2023-08-27 12:07:29-0700 | Firmware Splash Screen | Enabled
36 | 2023-08-27 12:07:31-0700 | ACPI Wake | S5
37 | 2023-08-27 12:07:31-0700 | Wake Source | Power Button | 0
3. Failed to render FW splash screen (due to any reason if FSP failed
to render the splash screen)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
disabled in the event log.
43 | 2023-08-27 13:06:10-0700 | System boot | 13
44 | 2023-08-27 13:06:10-0700 | Firmware Splash Screen | Disabled
45 | 2023-08-27 13:06:11-0700 | ACPI Wake | S5
46 | 2023-08-27 13:06:11-0700 | Wake Source | Power Button | 0
BUG=b:284799726
TEST=Verify that the event shows up in the event log when the user
selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display
the firmware splash screen.
Change-Id: Ie9e09acff5443c31b881c300134bc0bb06c490c6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch adds a new eventLog type ELOG_TYPE_FW_SPLASH_SCREEN to
support logging when we show firmware splash screen to the user.
BUG=b:284799726
TEST=Event shows in eventlog when user selects BMP_LOGO and
HAVE_FSP_LOGO_SUPPORT configs.
Change-Id: Id1572ecb83ca025ff65608e7ae4f3a065024f6d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77507
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A trivial follow-up on CB:67060. This makes contents of the file look a
bit less regular, but more like the rest Makefile.inc in the code base.
Change-Id: I772d37825e4b59cf927637dc39bfb3ee06115860
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77533
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change causes a freeze during boot on an RPL-UR that does not have
the memory part string in the CBI.
BUG=b:296353047
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot chromeos-bootimage', flash and boot
problematic DUT to kernel.
This reverts commit c51a7cdde4e1cb9014be401136c3f07f220ef365.
Change-Id: I99fe5111b5294673d9e0a5d13f9c240e0f4a92c3
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77516
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the required GPIO and FW_CONFIG support to configure BT offload
audio in discrete mode for Intel Mysty Peak module on google/rex
Proto2 HW.
BUG=b:297125514
Test=Verified BT audio playback on google/rex Proto2.
Change-Id: I560f1700f78f8b653dfcc2f26764f0ebf2652689
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77357
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
'useable' -> 'usable'.
Change-Id: Iad2e1ef97a5c98ffa6f33806bce5b77722e687e8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I157a3a700ed998b1012c85857c5fad78f60d62dc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77525
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I9804fcd9076b5a4813f099db0852a5af5ac36609
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77523
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Idc38c759489976cbdf51d9c4bb950ef6d470b93a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Id7634099e40c0bf97944be124b494c41d6335ad7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
According to the schematic, karis does not have a UWB, remove
related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I8a442518c2007cde883183871cef96db416850c0
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77437
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Iabbb637c797a361a2cbc55505002774ff4f774e1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77526
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clevo started using OZ711LV2 for the SD card reader around the time of
making its TGL boards. Without the driver, CPUs don't go to power states
lower than C2 due to LTR not being programmed. After enabling the driver
the CPU will go to C8 while the system is idle, giving significant power
savings if the system is left on battery power.
There is another issue with RPL where it only goes to C6 instead of C8.
This may be due to the intel_idle driver in Linux (as of 6.5-rc6
mainline and 6.4.6 stable) not supporting RPL C-states.
- tgl: Started being used with the Gazelle 3060 variant
- adl: Used on all models
- rpl: bonw15 does not have an SD card reader
Change-Id: I85c60feb6dcae7d877e70a6c6f2d3a7b3296fa0e
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The psp_transfer.h file was the same under all SoCs, and is really
tied to the file common/vboot/transfer.c, not the SOC.
This patch makes an include directory under vboot to put the header into
and sets it to be included for all SoCs using SOC_AMD_COMMON. This makes
the header file available to all platforms, so that new chips that don't
use the psp_verstage don't have to make a psp_transfer.h file just to
satisfy the compiler.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b9f2adee3a1d4d8d32813ec0a850344b7d717b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77303
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
License classifiers are much better about classifying files with SPDX
headers than they are at classifying the general text licenses due to
minor variations in the text. To help with classification, add the
SPDX headers to the files.
To see the current state of coreboot's licensing, see:
https://coreboot.org/fossology/
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If490f6705e7862d9ad02c925104113b355434101
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add new block for handling overclocking watchdog. The watchdog is
present since Skylake or maybe even earlier so it is safe to use with
most of the microarchitectures utilizing intelblocks.
The patch adds the common block for initializing and feeding the
watchdog. Timeout is defined statically in Kconfig and should be set
high enough by the board or SoC Kconfig to let the board boot with
full memory training and avoid reset loops. Full training of 128GB
DDR5 DIMM memory on AlderLake takes about 5 minutes. Newer SoCs
with newer memory technologies and higher RAM capacity may take more.
The default has been set to 10 minutes.
The patch also adds support for feeding watchdog in driverless mode,
i.e. it utilizies periodic SMI to reload the timeout value and restart
the watchdog timer. This is optional and selectable by Kconfig option
as well. If the option is not enabled, payload and/or software must
ensure to keep feeding the watchdog, otherwise the platform will
reset.
TEST=Enable watchdog on MSI PRO Z690-A and see the platform resets
after some time. Enable the watchdog in driverless mode and see the
platform no longer resets and periodic SMI keeps feeding the watchdog.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib494aa0c7581351abca8b496fc5895b2c7cbc5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68944
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new memory part in the mem_parts_used.txt and generate the
SPD ID.
1. MICRON MT62F512M32D2DR-031 WT:B
BUG=b:291018417
TEST=emerge-rex coreboot
Change-Id: I6e05c0d41a4899ed64dbab7efd8904cd361cb50e
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77426
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:297276380
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot
chromeos-bootimage
Cq-Depend: chrome-internal:6373154
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: If21c7a7d329b0b1cc2c73dadb0c5b8a5b8ab27e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77399
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
According to the schematic, karis does not have a WWAN module, remove
related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I653e3b4fae8a53018a6004528d1cfb3a6c883687
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77427
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: If093dc08c70c521cbef96ac5b5a7a46b37169bcd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch changes the SAR table selection logic to use FW_CONFIG which
will eventually help to support different WiFi SAR tables.
TEST=Able to build and boot google/rex.
Change-Id: I8f1244e3c3715bc3fbe6be1ade87817ff19836de
Signed-off-by: YH Lin <yueherngl@google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77428
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These Kconfig options were being used basically as #define statements,
which is unnecessary. This isn't a good use of Kconfig options and would
be better just as #defines if actually needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch moves the line adding hwlib to the include path to the inner
makefile so that it doesn't get added to every build, but only when
CONFIG_USE_SIEMENS_HWILIB=y
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id668b76366a554efff560cec746e637487ebdbf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77417
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This keeps the vc/amd/pi & pi/00670F00 Makefiles from getting pulled
into the build when they aren't needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If600c78c2ba74dd03cf493586dae037b96b7d623
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This change tells the build to only pull vc/eltan/security/Makefile.inc
into the overall build when USE_VENDORCODE_ELTAN is enabled in Kconfig.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1e462d8cc21c44716463c41cab598588cf4a22c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77418
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Disable SUSCLK for MT7922 based on FW_CONFIG to avoid power leakage.
BUG=b:296511904, b:294456574
BRANCH=firmware-nissa-15217.B
TEST=build and verified by EE
Change-Id: I9a6bf0ab7cc77f95e0d64f1380eac9e022fc08e4
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77383
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add two missing mapping for GPIO GPE routes
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I3f0d13cf7c07201856e934f22efc4cc8c4ea5bf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77423
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We only checked that the resource fits below the given `limit` in
memranges_find_entry(), but then accidentally placed it at the top
of the found memrange. As most resources have only a coarse limit,
e.g. the 4G barrier of 32-bit space, this became only visible when
artificially setting an unusual, lower limit on a resource.
So, for the final placement, use `MIN(limit, range end)` instead
of the range's end alone.
Change-Id: I3cc62ac3d427683c00ba0ac9f991fca62e99ce44
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Set customized_leds value for RTL8111K to fix led can't work.
BUG=b:297093096
BRANCH=firmware-brya-14505.B
TEST=Verified RTL8125 and RTL8111K led can work normally.
Change-Id: Icb8624005e7e24398abdd242570970c6bfa8a09f
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77390
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the nokris variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:285838647
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_NOKRIS
Change-Id: If7cb00ce978236746dfe4d097d1f20aeebb96a35
Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add new eventlog types to support logging of Platform Service Record
(PSR) backup related messages. Eventlog entries are added on PSR data
backup success/failure and also when PSR data is lost.
BRANCH=None
BUG=b:273207144
TEST=Verify elog event added after PSR data backup command is sent
cse_lite: PSR_HECI_FW_DOWNGRADE_BACKUP command sent
...
ELOG: Event(B9) added with size 10 at 2023-07-27 06:44:49 UTC
Change-Id: I01ce3f7ea24ff0fdbb7a202ec3c75973b59d4c14
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77004
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:271491845
TEST=Build and boot google/ovis on Rex P1 with buzzer added on GPP_B08
Change-Id: I44718ea15c93a075b6468f335a869a2cfa585273
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76049
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The `use_8254` should be flipped, the same as the other Intel
SOCs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2d6c859c0910b796d2ae5874a560ff9974578106
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Joxer will have SKUs with no type-c on daughter board, add fw_config
for EC control it.
BUG=b:297131468
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ie8098f72e29a10ebbaf3ba3b09d6a002d09fd35a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77394
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST: Boot to ubuntu OS and verify that USB4 devices are listed in lspci command
00:08.3/06:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15c0
00:08.3/06:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15c1
Change-Id: I6253a7694702179454bc1ca14825fd4f3b949c13
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The Genoa server SoC has 4 IOHC PCI roots instead of the 1 the mobile
SoCs have, so add the additional 3 SMN base address definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I72dba39bff7c7a739e1dfddd80e7f22e65b5f139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77395
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When LZMA compression is selected, then it's not needed to check if LZ4
compression is selected in addition. So instead of handling both cases
separately, check for LZ4 only if LZMA is not selected.
This applies to the cases of both, FSP-M and FSP-S.
Change-Id: I4ea61a38baf4c29bf522a50a26c6b47292e67960
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77323
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Karis use I2C touchscreen only, add SOC_TCHSCR_INT(GPP_C07) to ramstage
gpio table.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ie715cfbe1984dbe38cd933312304b42ce9088806
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
