diff options
| author | Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> | 2023-08-21 14:23:15 +0900 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2023-09-05 12:25:46 +0000 |
| commit | eba8952de13987ee070f914b2e84ffa97f414d7e (patch) | |
| tree | a8f3e72fe5cee23368bbe4056412098450293158 /src | |
| parent | 69f0289608c983ba187e4dc479fbdd27855cbab2 (diff) | |
mb/google/nissa/var/pirrha: Use GpioInt instead of GPE for digitizer pen
Currently pirrha's digitizer pen uses GPP_F12 for I2C HID interrupt
signal. But its IRQ number is the same as GPD2, which is used as
EC_SYNC_IRQ.
It caused EC driver loading error from dmesg:
cros_ec_lpcs GOOG0004:00: Failed to request IRQ 98: -16
cros_ec_lpcs GOOG0004:00: couldn't register ec_dev (-16)
cros_ec_lpcs: probe of GOOG0004:00 failed with error -16
So change the digitizer pen interrupt type to GpioInt to prevent
the conflict.
BUG=b:292134655
TEST=Verified EC driver reported no error and pen device worked
Change-Id: Ieb88e87fcfb06544a4b5b5133b752aa821fab76a
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77346
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/google/brya/variants/pirrha/gpio.c | 2 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/pirrha/overridetree.cb | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/src/mainboard/google/brya/variants/pirrha/gpio.c b/src/mainboard/google/brya/variants/pirrha/gpio.c index d0a114fe3c..431b613c0a 100644 --- a/src/mainboard/google/brya/variants/pirrha/gpio.c +++ b/src/mainboard/google/brya/variants/pirrha/gpio.c @@ -36,7 +36,7 @@ static const struct pad_config override_gpio_table[] = { /* F6 : NC */ PAD_NC(GPP_F6, NONE), /* F12 : GSXDOUT ==> EMR_INT_ODL */ - PAD_CFG_GPI_APIC(GPP_F12, NONE, PLTRST, LEVEL, INVERT), + PAD_CFG_GPI_INT(GPP_F12, NONE, PLTRST, LEVEL), /* F13 : SOC_PEN_DETECT_R_ODL ==> NC */ PAD_NC(GPP_F13, NONE), /* F15 : SOC_PEN_DETECT_OEL ==> NC */ diff --git a/src/mainboard/google/brya/variants/pirrha/overridetree.cb b/src/mainboard/google/brya/variants/pirrha/overridetree.cb index 50f37ba188..62b5a0a60c 100644 --- a/src/mainboard/google/brya/variants/pirrha/overridetree.cb +++ b/src/mainboard/google/brya/variants/pirrha/overridetree.cb @@ -391,7 +391,7 @@ chip soc/intel/alderlake chip drivers/i2c/hid register "generic.hid" = ""WCOM014B"" register "generic.desc" = ""WCOM Digitizer"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F12_IRQ)" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_F12)" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "20" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F16)" |