summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Expand)Author
2015-04-21arm(64): Manually clean up the mess left by write32() transitionJulius Werner
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
2015-04-21arm(64): Change write32() argument order to match x86Julius Werner
2015-04-21arm(64): Replace write32() and friends with writel()Julius Werner
2015-04-21rk3288: disable rk808 DCDC_UV_ACT_REG restart converter functionhuang lin
2015-04-21rockchip: configure lpddr odt properlyDerek Basehore
2015-04-21ipq806x: i2c: stop transfer as soon as an error is reportedSourabh Banerjee
2015-04-21ipq806x: i2c: write function fixed to avoid spurious successSourabh Banerjee
2015-04-21rk3288: support single channel ddrjinkun.hong
2015-04-21urara: Identity map DRAM/SRAMAndrew Bresticker
2015-04-21broadwell: Clear USB3.0 PORTSC status bits in sleep_prepare.Todd Broch
2015-04-21broadwell: indent xhci codePatrick Georgi
2015-04-21broadwell: Skip pre-graphics delay in resume pathDuncan Laurie
2015-04-21broadwell: Implement Recovery ButtonRyan Lin
2015-04-21imgtec/pistachio: Add spi_crop_chunk()Patrick Georgi
2015-04-20Kconfig: rename CONSOLE_SERIAL_UART to DRIVERS_UARTPatrick Georgi
2015-04-20purin: add ns16550 driverDaisuke Nojiri
2015-04-20console: copy ns16550 driver from u-bootDaisuke Nojiri
2015-04-20rk3288: Disable ramstage compression by defaultJulius Werner
2015-04-18vboot: make vboot2_verify_firmware returnDaisuke Nojiri
2015-04-18ipq806x: initialize UART even when console is not enabledVadim Bendebury
2015-04-18ipq806x: uart: replace hardware accessorsVadim Bendebury
2015-04-18broadwell: Set C9/C10 vccminDuncan Laurie
2015-04-18broadwell: Disable XHCI compliance mode entryDuncan Laurie
2015-04-18soc/intel/common: Add common reset codeLee Leahy
2015-04-18soc/intel/common: Add function to protect MRC cacheDuncan Laurie
2015-04-18broadwell: add ROM stage pre console init call backWenkai Du
2015-04-17cygnus: enable mmuDaisuke Nojiri
2015-04-17cygnus: configure memlayoutDaisuke Nojiri
2015-04-17cygnus: add timer functionsDaisuke Nojiri
2015-04-17pistachio: Move console UART to a Kconfig variableDavid Hendricks
2015-04-17qualcomm/ipq806x: add spi_crop_chunk()Patrick Georgi
2015-04-17pistachio: add DDR2 initialization codeIonela Voinescu
2015-04-17ipq806x: extend GSBI driver to support i2c on any GSBI blockSourabh Banerjee
2015-04-17ipq806x: add LPASS clock control driverVadim Bendebury
2015-04-17rk3288: Add software I2C supportJulius Werner
2015-04-17ipq806x: Add support for mmu in bootblock.Deepa Dinamani
2015-04-17broadcom/cygnus: add new SoC driverDaisuke Nojiri
2015-04-17chromeos: Provide common watchdog reboot supportJulius Werner
2015-04-17chromeos: Move memlayout.h/symbols.h into common directoryJulius Werner
2015-04-17storm: define location for storing CBFS header valueVadim Bendebury
2015-04-17pistachio: report UART register widthVadim Bendebury
2015-04-17uart: pass register width in the coreboot tableVadim Bendebury
2015-04-17exynos: return correct value when init_default_cbfs_media failsDaisuke Nojiri
2015-04-17rk3288: detect sdram size at runtimehuang lin
2015-04-17rk3288: Handle framebuffer through memlayout, not the resource systemJulius Werner
2015-04-17bg4cd: define custom romstage entryDaisuke Nojiri
2015-04-17rk3288: Add a config variable hack to skip display initDavid Hendricks
2015-04-17veyron: Activate Winbond SPI driverJulius Werner
2015-04-15rk3288: support edp HPD functionhuang lin
2015-04-15rk3288: set the rk808 BUCK default inductor current to max valuehuang lin
2015-04-15rk3288: Fix failing LPDDR3 reboot testjinkun.hong
2015-04-15rk3288: Fix failing DDR3 reboot testjinkun.hong
2015-04-15ipq806x: load and start RPMVadim Bendebury
2015-04-15storm: Add watchdog reset api.Deepa Dinamani
2015-04-15ipq806x: Load TZBSP blob from coreboot ramstageVikas Das
2015-04-15storm: use different CBFS caches before and after DRAM is availableVadim Bendebury
2015-04-15storm: configure/enable vboot2 supportVadim Bendebury
2015-04-15ipq8064: add DRAM initialization codeVadim Bendebury
2015-04-15ipq806x: add i2c driverVadim Bendebury
2015-04-15google/storm: prepare enabling vboot2Vadim Bendebury
2015-04-15ipq806x: modify imem layoutDeepa Dinamani
2015-04-15soc/ipq806x: Disable LPAE mode.Deepa Dinamani
2015-04-15ipq806x: set architecture to ARMV7Vadim Bendebury
2015-04-15broadwell: Fixes for _SWS supportDuncan Laurie
2015-04-15broadwell: Remove unused bootblock codeDuncan Laurie
2015-04-15broadwell: Clean up ME device and add new ME10 flowDuncan Laurie
2015-04-15soc/baytrail: Use microcode from the blobs repositoryMarc Jones
2015-04-15soc/broadwell: Use microcode from the blobs repositoryMarc Jones
2015-04-15rk3288: send correct EDID buffer sizehuang lin
2015-04-15rk808: Implement RTC driverDavid Hendricks
2015-04-15veyron_*: Move PMIC_BUS to a Kconfig variableDavid Hendricks
2015-04-15rk3288: Implement support for CRYPTO module and use it in vboot hashingJulius Werner
2015-04-15veyron_*: Use common CBFS wrapperDavid Hendricks
2015-04-15veyron: Move backlight gpio control to mainboard.chuang lin
2015-04-15veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdogJulius Werner
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
2015-04-15rk3288: implement spi_crop_chunk()Patrick Georgi
2015-04-14broadwell: Remove TPM device from lpc.aslDuncan Laurie
2015-04-14pistachio: implement clock setup for I2C0Ionela Voinescu
2015-04-14pistachio: Fix ROM clock base addressIonela Voinescu
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
2015-04-14pistachio: fix clocks setup codeIonela Voinescu
2015-04-14pistachio: Use 1.8433179 MHz for UART refclkDavid Hendricks
2015-04-14pistachio: increase size of bootblock to 18 KBIonela Voinescu
2015-04-14pistachio: change memory layout as to allow bigger CBFS cacheIonela Voinescu
2015-04-14pistachio: spi: use same clock edge for RX and TXIonela Voinescu
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
2015-04-14tegra132: lock down VPRAaron Durbin
2015-04-14rush: Enable dp displayJimmy Zhang
2015-04-14ryu: display: Add function to pass mode info to payloadJimmy Zhang
2015-04-14ryu: display: Set display shift clock dividerJimmy Zhang
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
2015-04-14rush: Add dp related parametersJimmy Zhang
2015-04-14rk3288: Fix memlayout to allow a little more bootblock spaceJulius Werner
2015-04-14rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGEJulius Werner
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
2015-04-14storm: add ipq8064 blobs to the CBFSVadim Bendebury
2015-04-14ipq8064: use the new utility to build bootblockVadim Bendebury