summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2023-12-06soc/amd/genoa/Kconfig: add CONSOLE_UART_BASE_ADDRESS defaultsFelix Held
Add defaults for the CONSOLE_UART_BASE_ADDRESS Kconfig symbol so that the SeaBIOS payload will know where the MMIO address of the UART is to build successfully without any additional user input during the build. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia05c3531cdbf3fd3e2e5f81b9d652f9dfef2111a Reviewed-on: https://review.coreboot.org/c/coreboot/+/79395 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2023-12-04soc/mediatek/mt8188: devapc: Allow APU to access BND_NORTH_APB2_SNina Wu
Update BND_NORTH_APB2_S's domain 5 permission to allow the access from APU. The APU requires certain information saved in BND_NORTH_APB2_S for voltage tuning. If this information cannot be retrieved, the APU may operate at a high frequency with low voltage. Consequently, the APU may not function as expected. Change-Id: I967b138dc5517e54da7fbf94b9e502e478c991b5 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79348 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-12-04soc/intel/alderlake: Update LidStatus UPD dynamicallySubrata Banik
This patch ensures that the LidStatus UPD is passed a dynamic value, rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0 devices. Problem statement: * FSP-S GFX PEIM initializes the on-board display (eDP) even when the LID is physically closed, because LidStatus is always set to 1. * FSP-S skips external display initialization even when the LID is closed. Solution: * FSP-S GFX PEIM module understands the presence of an external display if LidStatus is not set, and tries to probe the other display endpoint. * Statically passing LidStatus as always enabled (aka 1) does not illustrate the exact device scenarios, so this patch updates LidStatus dynamically by reading the EC memory map offset. BUG=b:313886118 TEST=Able to build and boot google/marasov to redirect the display using external HDMI monitor while LID is closed. Change-Id: Idb1d71bd54837630f36d43a45effc53d35f9cb70 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79352 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-12-02soc/amd: Add DBG2 ACPI tableZheng Bao
Dump the DBG2 table on Linux console. $> acpidump -s ACPI: DBG2 0x0000000000000000 000054 (v00 COREv4 COREBOOT 00000000 **) $> acpidump > acpidump.bin $> acpixtract -a acpidump.bin $> iasl -d dbg2.dat $> cat dbg2.dsl /* * ACPI Data Table [DBG2] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "DBG2" [Debug Port table type 2] [004h 0004 4] Table Length : 00000054 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : FA [00Ah 0010 6] Oem ID : "COREv4" [010h 0016 8] Oem Table ID : "COREBOOT" [018h 0024 4] Oem Revision : 00000000 [01Ch 0028 4] Asl Compiler ID : "CORE" [020h 0032 4] Asl Compiler Revision : 20220331 [024h 0036 4] Info Offset : 0000002C [028h 0040 4] Info Count : 00000001 [02Ch 0044 1] Revision : 00 [02Dh 0045 2] Length : 0028 [02Fh 0047 1] Register Count : 01 [030h 0048 2] Namepath Length : 0002 [032h 0050 2] Namepath Offset : 0026 [034h 0052 2] OEM Data Length : 0000 [Optional field not present] [036h 0054 2] OEM Data Offset : 0000 [Optional field not present] [038h 0056 2] Port Type : 8000 [03Ah 0058 2] Port Subtype : 0012 [03Ch 0060 2] Reserved : 0000 [03Eh 0062 2] Base Address Offset : 0016 [040h 0064 2] Address Size Offset : 0022 [042h 006612] Base Address Register : [Generic Address Structure] [042h 0066 1] Space ID : 00 [SystemMemory] [043h 0067 1] Bit Width : 00 [044h 0068 1] Bit Offset : 00 [045h 0069 1] Encoded Access Width : 03 [DWord Access:32] [046h 0070 8] Address : 00000000FEDC9000 [04Eh 0078 4] Address Size : 00000100 [052h 0082 2] Namepath : "." Raw Table Data: Length 84 (0x54) 00: 44 42 47 32 54 00 00 00 00 FA 43 4F 52 45 76 34 // DBG2T.....COREv4 10: 43 4F 52 45 42 4F 4F 54 00 00 00 00 43 4F 52 45 // COREBOOT....CORE 20: 31 03 22 20 2C 00 00 00 01 00 00 00 00 28 00 01 // 1." ,........(.. 30: 02 00 26 00 00 00 00 00 00 80 12 00 00 00 16 00 // ..&............. 40: 22 00 00 00 00 03 00 90 DC FE 00 00 00 00 00 01 // "............... 50: 00 00 2E 00 // .... BUG=b:303689867 Change-Id: I3c97a78d1889549421baf0bc1a2e8f959a0f47e2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79174 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-12-01soc/mediatek/mt8188: Support loading OP-TEE via an SMCkiwi liu
This patch adds compilation flags to BL31 to support loading OP-TEE via an SMC from rootfs. This patch also reserves 80MB memory space for running the OP-TEE image. BUG=b:246837563 TEST=emerge-geralt coreboot Change-Id: Ic38c8beb59c090ae56c5be6821dd8625435609e9 Signed-off-by: Kiwi Liu <kiwi.liu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78801 Reviewed-by: Kiwi Liu <kiwi.liu@mediatek.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-30soc/amd/genoa: Implement romstageArthur Heymans
The only thing romstage needs to do is find cbmem_top. TESTED: reaches ramstage. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Ic2837c4a2b0ec8dcd9dd99602f9c073999c36139 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76514 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2023-11-28soc/amd/cezanne: Move PSP_VERSTAGE_MAP_ENTIRE_SPIROM configKarthikeyan Ramasubramanian
Select PSP_VERSTAGE_MAP_ENTIRE_SPIROM in Cezanne Kconfig instead of common Kconfig. BUG=None TEST=Build BIOS image and boot to OS in dewatt. Change-Id: I476971700824fed06d17000001afc075105fa1ee Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79306 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-28soc/amd/common/psp_verstage: Make SPI ROM mapping configurableKarthikeyan Ramasubramanian
Earlier entire SPI ROM was mapped to memory. With limited TLB resources in PSP, this approach hit the limit on systems using 32 MiB SPI ROM. Therefore regions in SPI ROM were mapped on need basis. This works well on Picasso, Mendocino and Phoenix SoCs. But unfortunately this causes boot hangs in Cezanne SoC. Add a configuration to map the entire SPI ROM and enable it in Cezanne SoC. For other SoCs, keep the configuration disabled so that only the required SPI ROM region is mapped. BUG=b:309690716 TEST=Build and boot to OS in both Dewatt and Skyrim. Change-Id: I166ac7b50b367c067e1a743fc94686e69dd07844 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-11-28soc/amd/genoa: Add openSIL to Genoa KconfigMartin Roth
Select opensil & opensil_genoa. This enables openSIL for Genoa, allowing the build to be tested. Change-Id: I18379f311a56ff3f8b68d3c9a07a4f59de2d90b2 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2023-11-25tree wide: Rename VBOOT_MEASURED_BOOT* to TPM_MEASURED_BOOTPatrick Georgi
This follows commit c79e96b4eb3 which did the rename across the tree except in these places. Remove the flag from CHROMEOS abuild builds because it never really belonged there. Change-Id: If98fa27f64d6b676d3edf68ba6fbaacf7ac422e4 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79258 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-11-24soc/amd/genoa: Hook up microcode updatingArthur Heymans
Also update the regular expression to find the genoa blobs. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Iba0109c049019a22cba1e0358cedbd9c198c6569 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-11-22soc/amd/genoa: add I2C supportFelix Held
The Genoa SoC has 6 I2C controllers. In order to support those, select SOC_AMD_COMMON_BLOCK_I2C and implement the SoC-specific functions and data structures needed by the common AMD I2C code. Since the common AMD I2C code also reports if the controller is enabled or not in the SSDT, change the corresponding DSDT code to use this information. In this patch the I2C pad control registers don't get configured by coreboot yet and we rely on ABL already having those set up correctly which seems to be an assumption that the reference firmware is making too. PPR #55901 Rev 0.26 was used as a reference for the I2C controllers and the GPIO pins being used. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iebc10de6ea5c6d441cff04e016dcec62405078c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2023-11-21soc/intel/mtl: Keep SOC_INTEL_COMMON_BASECODE_RAMTOP for non-ChromeOSSubrata Banik
This patch guarantees that non-ChromeOS platforms continue to enable early caching. ChromeOS devices, on the other hand, control this configuration through the motherboard configuration based on the underlying SoC. BUG=b:306677879 TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex. Change-Id: I412b2b6a807dc0f5f2632f0fbd56bd37689dead3 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-11-18qualcomm/sc7180: Move QCSDI and increase romstage size by 4KBJulius Werner
We need to increase romstage size a little to make a compiler upgrade fit (CB:70771). Unfortunately the end of the romstage directly touches the QCSDI region in the current memlayout, and there is no other way to reshuffle things to make more space... so we need to move QCSDI out of the way. This means that anyone who is actually building this platform with CONFIG_QC_SDI_ENABLE (which requires a proprietary blob that's not publicly available) will need to recompile their QCSDI binary to match the new start address. Change-Id: Iaf13e4001b3c763e3ec59009779931ec75603d5d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79074 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-11-17soc/qualcomm/{sc7180,sc7280}: Allow building without QC blobs repoFelix Singer
Building coreboot for the Qualcomm SoCs SC7180 and SC7280 requires to include the Qualcomm blobs, which requires to accept their license. However, for various reasons it makes sense to build without blobs, e.g. static analysis or just build-testing. So in order to do that, run the steps integrating the Qualcomm blobs into the coreboot binary only if USE_QC_BLOBS is enabled and also remove guards which prevent building related mainboards when USE_QC_BLOBS is not enabled. Change-Id: I249ac477b8f10e7fa0848e967c23a3b3b9bbd27d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79026 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-15soc/amd/genoa: Add mmio.aslVarshit Pandya
This patch adds asl code for MMIO device like I2C, UART, GPIO etc. Change-Id: Ic5bc2cc0141e9da7e2c6ed7691188d7c94b6b1e3 Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>t show Reviewed-on: https://review.coreboot.org/c/coreboot/+/78895 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-15soc/qualcomm/{sc7180,sc7280}: Use correct return types for functionsZebreus
Some functions in the headers for sc7180 and sc7280 specified the int as their return type when they should have used enum cb_err. Found while testing GCC 13.2.0 Change-Id: I41331fe708a396f7f2f40359e8ba03c8a46a4d4b Signed-off-by: Zebreus <lennarteichhorn@googlemail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-11-14soc/intel/cannonlake: Drop entries from soc_acpi_name()Matt DeVillier
The THRM and SATA PCI devices do not currently have any ACPI devices defined, so drop them from soc_acpi_name() so they do not end up in the LPI constraint list. This eliminates the following errors under Linux: AE_NOT_FOUND: _SB_.PCI0.THRM AE_NOT_FOUND: _SB_.PCI0.SATA TEST= build/boot google/hatch (jinlon) and verify no ACPI errors. Change-Id: I3827b152644e2eaecc1ad288d441d2dad4d76ccb Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79013 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-14soc/intel/cmn/block/cse: Support sending EOP from payloadKapil Porwal
Skip sending EOP from coreboot when payload is sending it. BUG=b:279184514 TEST=Verify sending EOP from depthcharge on google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I0fbb9fd0f8522eefad39960ca3167c2ba764f523 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74765 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-11-13soc/amd/genoa: Hook up MCA codeArthur Heymans
This patch uses AMD SoC common code for MCA and adds MCA bank information as per Genoa Processor Programming Reference (PPR) version 0.25 (#55901) and uses AMD SoC common code. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: If728d803d600f7e86507cd1b35b40022bf4d379e Reviewed-on: https://review.coreboot.org/c/coreboot/+/76524 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-13soc/amd/genoa: Hook SMP and SMM initArthur Heymans
All CPUs properly come out of reset and relocate SMM. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I8c2d976addacd5a2ba70eb629510128853b9f847 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-11-13soc/amd/genoa: Double HEAP_SIZE to 0x200000Varshit Pandya
Default value of HEAP_SIZE is 0x100000, since genoa has a lot of CPU increase the HEAP_SIZE to 0x200000 Change-Id: Idd707200fe72730849267cd3cafc40e44f1f8c5d Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-11-13fmap: Map less space in fallback path without CBFS verificationJulius Werner
This is a fixup to CB:78914 which inadvertently broke the RK3288 SoC. Unfortunately we can only accommodate very little PRERAM_CBFS_CACHE in the tiny SRAM for that chip, so we would not be able to map an entire FMAP. Solve this problem for now by mapping less space when CBFS verification is disabled, and disallowing CBFS verification on that SoC. Change-Id: I2e419d157dc26bb70a6dd62e44dc6607e51cf791 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-11-11rockchip/rk3288: Reshuffle memlayout to make a bit more verstage spaceJulius Werner
RK3288 is bursting at the seams again. This patch reshuffles two more kilobytes to verstage to make things fit a little better. Change-Id: I5e7667061dce3d02441be83c0b8fb81500a1b1a3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78970 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-10soc/intel/alderlake: Allow using FSP repo for all RPL-S platformsMichał Żygowski
The Client FSP for Raptor Lake-S is present on the Intel FSP repository, so there is no need to restrict Raptor Lake-S FSP binary repository to IoT only. TEST=Build and boot MSI PRO Z790-P Change-Id: I77aecd6e2d753732bf6358afe2c7ea0491348387 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-11-10soc/alderlake: Fix order of defaults in FSP_HEADER_PATHMichał Żygowski
The combination of SOC_INTEL_RAPTORLAKE_PCH_S and FSP_TYPE_IOT is currently broken. By default, e.g. for MSI PRO Z790-P, the FSP_HEADER_PATH does not match the default FSP_FD_PATH. For headers the client FSP is selected, while for the FD file, IoT FSP binary is chosen. The order of default for both headers and FD file must be the same to match the headers and binaries. TEST=Build default MSI PRO Z790-P config and see that FSP_HEADER_PATH matches FSP_FD_PATH FSP variant-wise. Change-Id: I8db5ea10c2986ff8d3fa7d616b3f1617d05f0260 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78410 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-10soc/intel/meteorlake: Set DTT PCI device IRQ to INT_A/PIRQ_AJeremy Compostella
The Dynamic Tuning Technology (DTT) device IRQ is not programmable and is INT_A/PIRQ_A (IRQ 16). Reference: Meteor Lake U/H and U Type4 External Design Specification External Design Document (657165) TEST=Linux driver successfully uses IRQ 16 on rex. Without this patch it was binding IRQ 18 but interrupts were going to IRQ 16. Change-Id: I2cbb9dd41f27c40a29346be325bb9c46d1061afb Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-11-10device/Kconfig: rename AZALIA_PLUGIN_SUPPORT to AZALIA_HDA_CODEC_SUPPORTFelix Held
Rename AZALIA_PLUGIN_SUPPORT to AZALIA_HDA_CODEC_SUPPORT and add a help text to this Kconfig option to clarify what this option is about. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I71e36869c6ebf77f43ca78f5e451aebfb59f1c74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-11-09Allow to build romstage sources inside the bootblockArthur Heymans
Having a separate romstage is only desirable: - with advanced setups like vboot or normal/fallback - boot medium is slow at startup (some ARM SOCs) - bootblock is limited in size (Intel APL 32K) When this is not the case there is no need for the extra complexity that romstage brings. Including the romstage sources inside the bootblock substantially reduces the total code footprint. Often the resulting code is 10-20k smaller. This is controlled via a Kconfig option. TESTED: works on qemu x86, arm and aarch64 with and without VBOOT. Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-11-09soc/amd: Remove unnecessary choice symbol name from PSP KconfigMartin Roth
There's no reason to name this choice block. Remove the name. Change-Id: Iebf8b1e7af928b988ab514d9dd85d2e70bf00c09 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78917 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-07soc/amd/common,stoneyridge: drop invalid hda_soc_ssdt_quirksFelix Held
Drop the hda_soc_ssdt_quirks function since it doesn't apply for any of the SoCs supported by the Stoneyridge code which was the only SoC implementing it. This code was added when commit 91a7abf25c72 ("soc/amd/hda: Move HDA PCI device from DSDT to SSDT") rewrote the code originally added in commit 1587dc8a2b4d ("soc/amd/stoneyridge: Add northbridge support") as a copy from northbridge/amd/pi/00670F00. This code was moved around in commit 6580408a7e0a ("amd/pi/hudson: Move audio to northbridge"), since the HDA controller was moved from the FCH to the northbridge complex. When the controller was moved, the PCI config space interface also changed, so those bits are no longer the DisableNoSnoop, DisableNoSnoopOverride, and EnableNoSnoopRequest bits of the Misc Control register of the HDA controller, but some bits within the ClassCodeW field of the ACGAZ Mirrot Reg Ctrl 0 register. BKDG #55072 Rev 3.04 (Stoneyridge), BKDG #50742 Rev 3.08 (family 15h model 60h-6fh / 00670F00), and BKDG #52740 Rev 3.05 (family 16h model 30h-3fh) were used as a reference. Only the SoC with BKDG #52740 still has the HDA controller in the FCH; the other two have it in the northbridge. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I77fc76752b1c7de62ba8a196f15c198f55be3074 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78940 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-07Revert "Kconfig: Bring HEAP_SIZE to a common, large value"Patrick Georgi
This reverts commit 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6. Reason for revert: It breaks wakeup from suspend on a bunch of boards. While this approach of eyeballing "correct" values by chipset _should_ be fixed, it should also be accompanied by compile time verification that the memory map works out. Since nobody seems to care enough, let's just revert this, instead of keeping the tree broken for a bunch of configurations. Change-Id: I3cd73b6ce8b15f06d3480a03ab472dcd444d7ccc Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78850 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-11-06soc/amd/genoa/chipset.dt: add UART device opsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9fc155fe76c05fefd4ce31ae6b96dcc4527b6abc Reviewed-on: https://review.coreboot.org/c/coreboot/+/78901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2023-11-06soc/amd/*/iomap: drop unused I2C_MASTER_START_INDEX definitionsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0eae9e4d246bd07f43b1d77e5ad7649c010d0efe Reviewed-on: https://review.coreboot.org/c/coreboot/+/78899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-11-06soc/amd/common/block/i2c: add pre-processor guards for ACPIFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8dc93b12b81abee41f6f225f41d1f9953d1d93e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-11-06soc/amd/genoa/include/iomap: add missing I2C and I3C MMIO basesFelix Held
All base addresses of MMIO devices in the devicetree should also have corresponding defines in iomap.h. PPR #55901 Rev 0.26 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0444e6cc0587b484a4a1ff49fa4b1540a24c8e80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78897 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-06soc/amd/genoa/devicetree: fix MMIO base addressesFelix Held
The base addresses of I2C 5 and I3C 3 were wrong and all I3C controllers should use the base address of the 4kiB block where all registers of that I3C controller are located in. PPR #55901 Rev 0.26 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1c983d4a709000ef7963b96228322603b98728aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/78896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-11-04soc/qualcomm/sc7280: Enlarge BOOTBLOCK to 44KYidi Lin
After CB:78800 applied, the bootblock increases 2128 bytes and exceeded its allotted size (40K). Therefore, we enlarge BOOTBLOCK to 44K to solve the compilation error. This patch also increases PRERAM_CBFS_CACHE to 103K to fill the empty space (1K) between TIMESTAMP and TTB. BRANCH=none BUG=none TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -B Change-Id: Iae9d44939b29098e823508dd3965a1bae7a69041 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-11-04Use common GCD functionYidi Lin
Change-Id: I30e4b02a9ca6a15c9bc4edcf4143ffa13a21a732 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78799 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-11-04soc/intel/meteorlake: Consolidate settings for enabling tracehubKane Chen
To get tracehub working, it requires few settings such as SOC_INTEL_METEORLAKE_DEBUG_CONSENT=2 and enable tracehub device in dev tree. This commit binds all tracehub related settings to Kconfig, so that users only need to enable SOC_INTEL_COMMON_BLOCK_TRACEHUB TEST=boot on screebo and test tracehub device exists and working Change-Id: Ie830fe2fd38e3456497bea37fe42ca60d26ca305 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-11-04soc/intel/alderlake: Add missing min sleep state for DPTF deviceMatt DeVillier
Add an entry in the min_pci_sleep_states array for SA_DEVFN_DPTF, to correct warning in cbmem log: [WARN] unknown min d_state for PCI device 00:04.0 TEST=build/boot google/brya (banshee), verify warning not present in cbmem log, verify entry for DPTF device in ACPI LPI constraint list. Change-Id: I2a9976b065f08e4acd31c3deca13c5278f031a90 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78877 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-11-03soc/amd/mendocino: Conditionally select HAVE_FSP_LOGO_SUPPORTKarthikeyan Ramasubramanian
Indicate FSP has support to display logo when graphics initialization is done in FSP. BUG=b:294055390 TEST=Build and boot to OS in Skyrim with and without passing the BMP logo buffer from coreboot. Change-Id: I6112c03723dcbc34cb0f57c400f831c765b95115 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78882 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-03soc/intel/braswell/Kconfig: Set HPET_MIN_TICKSMatt DeVillier
Commit 2bc9cee0f70f ("Braswell: Update the ACPI tables") switched the SoC from using its own HPET generation code to the common x86 code, but along the way the min_tick value got lost. Restore the original value prior to the above commit, which is now set via a Kconfig override. TEST=build/boot google/cyan (edgar), verify min_tick value in HPET ACPI table is correct. Change-Id: I2633e7cd0c3d74c1554ae8c1f2bb6387fd6dde2b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78744 Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-03soc/intel/braswell: Unify DPTF enablementMatt DeVillier
Currently, there are 3 separate settings for DPTF which are not always in sync: - the enabled/disabled state of the devicetree PCI device - the 'dptf_enable' register, which sets the ACPI device status via GNVS - the 'DptfDisable' register, which sets the FSP UPD of the same name To make things sane, drop the two chip registers, and set the GNVS variable and FSP UPD based on the enabled/disabled status of the DPTF PCI device in the mainboard's devicetree. TEST=build/boot google/cyan (edgar). Verify that the PCI and ACPI devices are present/enabled when DPTF is enabled in devicetree, and not present/disabled when disabled in devicetree. Change-Id: I8fc1b63eda0dc2e047d9cb1e11a02d41ab8b2ad7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-11-03soc/intel/cannonlake: Add missing entry to soc_acpi_name()Matt DeVillier
The device name for the SA thermal/DPTF PCI device was missing from soc_acpi_name(), leading to an invalid PLI device constraint entry being generated in the SSDT (the name field was blank/missing). Add the missing entry, matching the name to the existing ACPI device. TEST=build/boot Win11 on google/puff (wyvern) without a BSOD. Change-Id: I7ac03fd292246981f32d9ad894b8f0f9870240fc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78869 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-11-03soc/intel/cannonlake: Add missing min sleep state for thermal deviceMatt DeVillier
Add an entry in the min_pci_sleep_states array for SA_DEVFN_THERMAL, to correct warning in cbmem log: [WARN] unknown min d_state for PCI device 00:12.0 TEST=build/boot google/puff (wyvern), verify warning not present in cbmem log, verify entry for THRM device in ACPI LPI constraint list. Change-Id: Ide98c1b82c56ed1d34c608f9419f61c8e15d2dab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78868 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-03soc/intel/cmn/gfx: Join MBUS while FSP-S performs GFX initSubrata Banik
This patch calls into the function to join the MBUS if the GFX PEIM module inside the FSP binary is taking care of graphics initialization based on the RUN_FSP_GOP config option. The FW skips joining the MBUS in case of a non-FSP solution and/or SOC_INTEL_GFX_MBUS_JOIN config is not enabled. BUG=b:284799726 TEST=MBUS joining is only applicable for google/rex while using GFX PEIM. Change-Id: I50d719a286722f5aafbad48ab4ca60500c836dd6 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-11-02Revert "soc/intel/{tigerlake,meteorlake}: Check ITBT FW version"Ravi Sarawadi
This reverts commit 2e10a6d6f3ec46bcaf75bd066319d51f001be764. Reason for revert: The FW version check is not supported except for ADL platform. Reverted change broke S0ix functionality; the original CL was added as HW W/A for ADL ONLY. BUG=b:306214725 TEST=S0ix cycles on Rex with TBT Device attached. Change-Id: Ib8eb11d36eac4e1c94a3349386442fa3eeeaef37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78457 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-02soc/amd/*: Ensure PSP soft fuse bitmask set properlyMatt DeVillier
Commit e728766f4596 ("soc/amd/mendocino: Do not load MP2 Firmware when in RO") added logic to ensure that the MP2 disable soft fuse bit was set for the RO section, but failed to check if the bit was already set otherwise (as it is for non-ChromeOS builds). This caused the bit to appear twice in the PSP_RO_SOFTFUSE_BITS string, and when the string was converted to a series of numeric values and added together, bit (n+1) ended up being set instead of bit n. To mitigate this, use the makefile sort() function to ensure the PSP_[RO_]SOFTFUSE_BITS string does not contain any duplicates before the bitmask is calculated. Apply this to all AMD SoC makefiles where the softfuse bits are added. TEST=build/boot google/skyrim (frostflow). Use a verbose build (V=1) to verify that the correct soft fuse value is passed to amdfwtool for RO and RW_A/B for both ChromeOS and non-ChromeOS builds. Change-Id: I2e207e20132d44016fbcb986bdfd8e935d8fead5 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78823 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-11-02drivers/intel/gma/opregion: Use CBFS cache to load VBTJeremy Compostella
Thanks to x86 CBFS cache support, we can leverage cbfs_map() function to load the VBT binary regardless of if it is compressed or not. Change-Id: I1e37e718a71bd85b0d7dee1efc4c0391798f16f7 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-11-02soc/amd/mendocino: Update FSP-S UPD to pass boot logoKarthikeyan Ramasubramanian
A new FSP-S UPD is added to allow passing a buffer containing boot logo in BMP format. Update the FSP-S UPD and add a SoC specific callback to populate the UPD. BUG=b:294055390 TEST=Build and boot to OS in Skyrim. Pass the BMP logo buffer through the UPD to FSP-S. Ensure that the concerned driver in FSP-S handles the buffer. Change-Id: Ie522956b6dfe2400ef91d43c80f2adc6d52c8415 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78817 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-02soc/amd/common/psp: Remove unnecessary prompts from KconfigMartin Roth
I think this was probably a cut & paste error. We don't want prompts for the "default" Kconfig options. Those should be set by the platform, not the end user. These prompts didn't make sense where they were in the Kconfig menus either. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Idcd2ba84591d31a9a25bcc6cae3ec163939d7836 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-11-02soc/intel/*: Correct ACPI device name for eMMCMatt DeVillier
The ACPI name of any device needs to match the name used for generating the S0i3 LPI constraint list, which comes from soc_acpi_name() for each SoC. The names used for the eMMC controller do not match, which will lead to broken ACPI tables since the LPI constriant will reference an ACPI device which does not exist. Some OSes tolerate this better than others, but it should still be corrected. TEST=build/boot google/{hatch,volteer, brya}, dump ACPI and verify no invalid device names referenced. Change-Id: Icbc22b6b2a84bbe73f1b09083f27081612db5eba Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78825 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-11-01soc/intel/cmn/gfx: Fix GFX modeset issue with dual-displaySubrata Banik
This patch fixes the redundent GFX modeset issue when a dual display is attached (e.g. an eDP display and an HDMI display). The issue was caused by the MBUS joining logic not considering the display type. This patch introduces three types of display: internal, external, and dual-display. The MBUS joining logic is then updated to consider the display type and ensure that the correct pipes are joined to the MBUS: For internal-only displays, only PIPE-A is joined to the MBUS. For external displays, no pipes are joined to the MBUS. For dual-displays, all available pipes are joined to the MBUS. BUG=b:284799726 TEST=Able to fix the redundent modeset issue when eDP and HDMI attached to the google/rex. Change-Id: Ie2a3b9f1212a9dcab2b7305078fe22ee35e7423c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78691 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-01soc/intel/meteorlake: Adjust Power State Current 2 thresholdJeremy Compostella
VccSA Power State 2 (PS2) current threshold has be adjusted to 10A to improve PS2 residency which reduces Voltage Regular (VR) power loss. BUG=b:308002192 TEST=power and performance analysis shows a positive Load Line result Change-Id: I2da2b05de8a04f91dacaa55062165c4351422865 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-11-01soc/intel/meteorlake: Add power limits for 4+8 28W SOC SKUCurtis Chen
This commit adds power limit settings for 4+8 28W SOC sku and renames MTL_P_682_CORE to MTL_P_682_482_CORE since they are sharing same 28W settings. BUG=b:306677879 TEST=boot on rex with 4+8 SOC and power limit settings are correct Change-Id: Icb5fc2b13e8510f89c03927439431190439a3a94 Signed-off-by: Curtis Chen <curtis.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78796 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-31soc/intel/cannonlake: Implement SoC sleep state arrayMatt DeVillier
Adapted from Alderlake implementation, modified as needed. Device names missing from soc_acpi_name() were added as well. TEST=build/boot Win11, Linux on google/hatch (akemi). Change-Id: Ib2c733c04e29f0f9e7e2e6dbf36c2a7618fdc23f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-10-31soc/intel/tigerlake: Implement SoC sleep state arrayMatt DeVillier
Copied from Alderlake implementation, modified as needed for Tigerlake. Device names missing from soc_acpi_name() were added as well. TEST=build/boot Win11, Linux on google/volteer (drobit). Change-Id: I34999891ea0d386328698109b6315d481de7c43a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78521 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-10-31soc/amd/genoa: Add PCI interrupt supportVarshit Pandya
This patch adds PCI interrupt details as per the Processor Programming Reference (PPR) version 0.25 (#55901), table 319. Change-Id: I81251bd60aac1d7bd3181699d3adca315291f336 Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78392 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-28soc/intel/meteorlake: Expose In-Band ECC UPD config to mainboardMarx Wang
Meteor Lake has a UPD config called In-Band ECC(IBECC) which uses a part of the system DRAM to store the ECC information. There are a few UPD parameters in FSP-M to configure this feature as needed. This patch adds code to expose these parameters to the devicetree so that they can be configured on the mainboard level as needed. Change-Id: Ice1ede430d36dff4175a92941ee85cc933fa56d5 Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-28soc/intel/meteoerlake: Add power limits for 2+4 15W SOC SKUKane Chen
This commit adds power limit settings for 2+4 15w SOC sku and renames MTL_P_282_CORE to MTL_P_282_242_CORE since they are sharing same 15w settings. BUG=b:306543967 TEST=boot on rex with 2+4 SOC and power limit settings are correct Change-Id: Id738303d1652f964142f8f27110426d6b84609bf Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78495 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-27soc/amd/genoa: add PCI domain resource reportingFelix Held
Use the common AMD data fabric resource reporting code to report how openSIL distributed PCI buses, MMIO, and IO resources to coreboot's resource allocator. This replaces the original CB:76521 which was written back when the common AMD data fabric resource reporting code didn't exist yet. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Ifcd655ea6d5565668ffee36d0d022b2b711c0b00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2023-10-27soc/amd/genoa: select PSP gen 2 supportFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iffe21fb0c0bff0fc21ce1ac3af71d39bb62fd384 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78660 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-27soc/intel/cse: remove cbfs_unverified_area_map() API in cse_liteRizwan Qureshi
With CBFS verification feature (CONFIG_VBOOT_CBFS_INTEGRATION) being enabled, we can now remove cbfs_unverified_area_map() APIs which are potential cause of security issues as they skip verification. These APIs were used earlier to skip verification and hence save boot time. With CBFS verification enabled, the files are verified only when being loaded so we can now use cbfs_cbmem_alloc()/cbfs_map function to load them. BUG=b:284382452 Change-Id: Ie0266e50463926b8d377825142afda7f44754eb7 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78214 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2023-10-26soc/intel/cannonlake: Add/use chipset devicetreesMatt DeVillier
Change-Id: I8ceae832e60cd3094b4a34ab3a279e5a011f2c80 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-10-26soc/intel/apollolake: Select USE_LEGACY_8254_TIMERSean Rhodes
CB:77409 corrected what the UPD `Timer8254ClkSetting` was set to; this stopped a few boards from booting. Selecting USE_LEGACY_8254_TIMER ensures that the previous behaviour is maintained. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ibf898cae6c9fbaf3dc7184eee745278d9b5eade4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78504 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-25soc/amd/stoneyridge: Select SOC_AMD_COMMON_LATE_SMM_LOCKINGMatt DeVillier
Select SOC_AMD_COMMON_LATE_SMM_LOCKING to ensure that SMM remains unlocked on S3 resume until after the AGESA call to s3finalrestore has completed. If SMM is locked prior, S3 resume will fail: [DEBUG] agesawrapper_amds3laterestore() entry [DEBUG] Error: Can't find 57a9e200 raw data to imd [ERROR] S3 volatile data not found TEST=build/boot google/liara, verify S3 resume succeeds. Change-Id: I49659b4e5aba42367d6347e705cd92492fc34a0f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-10-25soc/amd/common/smm: Add option for late SMM lockingMatt DeVillier
Pre-Zen SoCs like Stoneyridge call into an AGESA binary as part of S3 resume, which will fail if SMM is locked, causing the device to (eventually) cold boot. To mitigate this, add a new Kconfig to enable "late" SMM locking, which restores the previous behavior prior to commit 43ed5d253422 ("cpu/amd: Move locking SMM as part of SMM init"). TEST=tested with rest of patch train Change-Id: I9971814415271a6a107c327523a0a7c188a91df6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78352 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-25soc/amd/*/Kconfig: rework SPL optionsFelix Held
Move all security patch level (SPL) related Kconfig options to the common AMD PSP Kconfig file. Commit 4ab1db82bb30 ("soc/amd: rework SPL file override and SPL fusing handling") already reworked the SPL handling, but missed that another Kconfig option SOC_AMD_COMMON_BLOCK_PSP_FUSE_SPL controlled if the PSP mailbox command to update the SPL fuses was sent by the code that got added to the build when PERFORM_SPL_FUSING was selected. To make things less unexpected, rename PERFORM_SPL_FUSING to SOC_AMD_COMMON_BLOCK_PSP_SPL since it actually controls if the SPL support code is added to the build and also rename SOC_AMD_COMMON_BLOCK_PSP_FUSE_SPL to PERFORM_SPL_FUSING. This changes what PERFORM_SPL_FUSING will do from including the code that could do the fusing if another option is set to being the option that controls if the fusing mailbox command will be set. All SoCs that support SPL now select SOC_AMD_COMMON_BLOCK_PSP_SPL in their Kconfig, which won't burn any SPL fuses. The logic in the Skyrim mainboard Kconfig file is reworked to select PERFORM_SPL_FUSING for all boards on which the SPL fuses should be updated; on Guybrush PERFORM_SPL_FUSING default is changed to y for all variants. The option to include the code that checks the SPL fusing conditions and allows sending the command to update the SPL fuses if the corresponding Kconfig is set doesn't need to be added on the mainboard level, since it's already selected at the SoC level. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I12fd8775db66f16fe632674cd67c6af483e8d4e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-10-25soc/amd/common: Add ACP device to common block graphics driverCoolStar
Supports a brand new ACP driver for STONEY / Grunt chromebooks. AMD's Audio CoProcessor handles i2s/tdm audio, and is located on the GPU. On Windows the PCIe device for the GPU is owned by the AMD proprietary driver, hence a separate device has to be added for the ACP driver. Fortunately since IOMMU is disabled on STONEY, the driver itself can pull BAR5 from the GPU and use that to initialize, so no special configuration is required in ACPI other than the ID. Change-Id: I0e31c3b31fa9fb99578c04b79fce2d8c1d695561 Signed-off-by: CoolStar <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-10-25cbmem.h: Drop cbmem_possible_online in favor of ENV_HAS_CBMEMArthur Heymans
The macro ENV_HAS_CBMEM achieves the same as this inline function. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I6d65ca51c863abe2106f794398ddd7d7d9ac4b5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/77166 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2023-10-24soc/intel/meteorlake: Add PsysPmax configurationJakub Czapiga
psys_pmax_watts is configured in SoC node of devicetree. Value represents Watts the PSU provides. Zero means automatic/default configuration (not optimal). BUG=b:289853442 TEST=Build google/rex/ovis4es target board Change-Id: I69afa06110254f6384352c062891c0c9c0b23070 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76796 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-24soc/amd/stoneyridge: Update SMU fw2 name in fw.cfgMatt DeVillier
Update the filename for the PSP_SMUFW2_SUB1_FILE to use the compressed and signed version (.csbin) rather than the uncompression + signed version (.sbin), in order to be consistent with the other SMU firmware files. This will also facilitate dropping the duplicate files in an upcoming update to the amd_blobs repo and updating the SMU files (all of which are .csbin). This change is actually a no-op since the .csbin and .sbin are the same file; it appears that the .sbin file was incorrectly named when added, and then the same file was added later with the correct extension. TEST=build/boot google/kahlee (liara) Change-Id: I10fa8e949ab589d315862c06b4125c902520cbbc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-10-24soc/amd/stoneyridge: Use common block graphics driverCoolStar
Select the common block graphics driver for Stoneyridge. Drop Stoney's ACPI stub for the iGPU as the device will now be generated by the common block acpigen and put into the SSDT. TEST=tested with rest of patch train Change-Id: I260b964be59c1a208ff907c474243a9ace03f206 Signed-off-by: CoolStar <coolstarorganization@gmail.com> Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78428 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-24soc/amd/common/graphics: Factor out FSP graphics initMatt DeVillier
Factor out the FSP-dependent graphics init call and header into a separate file, so that the common graphics init can be used by non-FSP platforms (eg Stoneyridge) without any preprocessor guards. TEST=build google/skyrim Change-Id: Ib025ad3adec0945b4454892d78c30b4cc79e57a0 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78599 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-23soc/intel/cannonlake: Add ACPI devices for FSPI, SRAM, HEC1Matt DeVillier
Add ACPI devices for these components so that generated LPI constraints for them have valid device references. TEST=tested with rest of patch train Change-Id: I3b85fec3de8f33d338425a417cc8b0f5290a5e4f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78520 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-23soc/intel/tigerlake: Add ACPI devices for FSPI, SRAM, HEC1Matt DeVillier
Add ACPI devices for these components so that generated LPI constraints for them have valid device references. TEST=tested with rest of patch train Change-Id: Ib70dc29f54d28ec1fe7b630ab3fab24bcdd08154 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78519 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-23soc/intel/common/acpi: Don't generate LPI constraints for disabled/hidden ↵Matt DeVillier
devices When walking the devicetree to generate the list of devices and minimum sleep states, skip any devices which have the disable or hidden flags set. This prevents adding entries for devices which are not present, which are hidden (and likely to not have a min sleep state entry), or generating duplicate entries in the case of PCIe remapping. Any of these conditions are considered invalid by Windows and will result in a BSOD with an INTERNAL_POWER_ERROR. TEST=tested with rest of patch train Change-Id: I06f64a72c82b9e03dc8af18700d24b3d10b7d3a7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-10-23soc/intel/common/pcie: Disable removed RPs when updating devicetreeMatt DeVillier
If a root port is not present but was enabled in the devicetree, mark it disabled so that no ACPI references will be generated by any function which walks the devicetree (eg, LPI constraints). TEST=tested with rest of patch train Change-Id: I52e23fb1c0148a599ed736fc294e593ebbd27860 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78517 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20soc/amd/*: Set AMD_FW_AB_POSITION to either 64 or 128 bytesKarthikeyan Ramasubramanian
When CBFS verification is enabled, add amdfw_a/b.rom at offset 128 bytes to account for CBFS file header with hash attribute. When CBFS verification is disabled, add amdfw_a/b.rom at offset 64 bytes to account for CBFS file header without hash attribute. BUG=None TEST=Build Skyrim, Myst BIOS images with and without CBFS verification enabled. Change-Id: Ic374ac41df0c8fb8ce59488881ce5846e9058915 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-10-20soc/amd/phoenix/psp_verstage: Fix the hash file namesKarthikeyan Ramasubramanian
Fix the hash file names to be used to verify signed PSP binaries when booting with VBOOT FW Slot B. BUG=None TEST=Build and boot to OS in Myst with PSP Verstage enabled using both VBOOT slots A and B. Change-Id: I89f02922bc901d8ac71d48bf5128fe6ecead43a0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-10-20soc/amd/phoenix: Disable CCP DMA in PSP VerstageKarthikeyan Ramasubramanian
Some stalls are observed while using CCP DMA in PSP verstage - especially with CBFS verification enabled. Also with RW CBFS verification enabled, the entire firmware body is not loaded during verstage for verification. Instead the files are verified as and when they are loaded from CBFS. Hence the impact to boot time is reduced since only few files are loaded during PSP verstage. Hence disable CCP DMA in PSP verstage until the root cause is identified. BUG=None TEST=Build and boot to OS in Myst with CBFS verification enabled. Change-Id: I22ac108b08abcfe432dfd175644393e384888e11 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78234 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20soc/amd/phoenix: Add build rules to enable CBFS verificationKarthikeyan Ramasubramanian
Add SPI flash RO ranges to be verified by GSC in order to enable CBFS verification. Also with CBFS verification enabled, CBFS metadata is more than 64 bytes. So configure the offset of amdfw_a/b to 128 bytes - next address aligned to 64 bytes. BUG=b:277087492 TEST=Build and boot to OS in Myst with and without CBFS verification enabled. Change-Id: Ibfffd3d6fce8b80ec156a7b13b387e1df8c43347 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78233 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20soc/intel/meteorlake: Set build time physical address reserved bitsJeremy Compostella
Meteor Lake TME bits [42-45] are reserved regardless of if the part supports TME or not. On a device with TME fused off, we noticed some reboot hangs which have been narrowed down to internal IP routing issues when the IA accesses the Input Output Manager (IOM) which is mapped at 0x3fff0aa0000 (0x3ff upper 32 bits). It turns out since TME is fused off, coreboot uses the full physical address size reported by CPUID MAXPHYADDR (46 bits). Therefore, it allocates thunderbolt memory range on 46 bits (0x3fff upper 32 bits). Since 4 of these bits are actually reserved, it seems that this address range is "stripped down" to 42 bits (=> 0x3ff upper 32 bits) resulting in potential conflict with other devices such as IOM. BUG=b:288978352 TEST=No reboot issue on rex with TME fused off Change-Id: I96ba23ab304257003c0413243d3ac8129ce31743 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78452 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20x86: Add pre-memory stages CBFS cache scratchpad supportJeremy Compostella
Having a CBFS cache scratchpad offers a generic way to decompress CBFS files through the cbfs_map() function without having to reserve a per-file specific memory region. This commit introduces the x86 `PRERAM_CBFS_CACHE_SIZE' Kconfig to set the pre-memory stages CBFS cache size. A cache size of zero disables the CBFS cache feature. The default value is 16 KB which seems a reasonable minimal value enough to satisfy basic needs such as the decompression of a small configuration file. This setting can be adjusted depending on the platform needs and capabilities. We have set this size to zero for all the platforms without enough space in Cache-As-RAM to accommodate the default size. TEST=Decompression of vbt.bin in romstage on rex using cbfs_map() Change-Id: Iee493f9947fddcc57576f04c3d6a2d58c7368e09 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-10-20soc/cavium/cn81xx/bootblock_custom.S: Specify archArthur Heymans
This fixes assembling with clang which complains about fpu instructions. TEST: BUILD_TIMELESS=1 remains the same. Change-Id: I175b8e749fafde5fb7ffb8101fc0dc892d9b4e0d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74539 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20soc/amd/genoa: Add Global NVSVarshit Pandya
Change-Id: I8d64236fc81e848503535db6f52e93328a60404c Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-10-20soc/amd/genoa: Hook up IOMMU opsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I2419feed1a76ec1cb04cb9640689b8758fa1d3f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-10-20soc/amd/genoa: Add SMU header file and SMU KconfigVarshit Pandya
Change-Id: Ief56bff2a1b8825d6e65aeb5f7ed9e8f432e465b Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-10-20soc/amd/genoa: Hook up LPC opsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I068fcbbcb0641cddce8fa85e2a64ab44d91d6bcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/76526 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20soc/amd/genoa: Add MAX_CPUSVarshit Pandya
As per PPR, Genoa supports up to 96 core, that is 192 threads. It also supports dual socket. Change-Id: I817fea7c41477f476794e9e5c16451037d01f912 Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-10-20soc/amd/common/psp_verstage: Add PSP_VERSTACK_STACK_IS_MAPPED configKarthikeyan Ramasubramanian
Crypto Engine in PSP prefers the buffer from Static RAM (SRAM). Hence if a buffer comes from within SRAM address range, then it is passed directly to Crypto Engine. Otherwise a bounce bufer from the stack is used. But on SoCs like Picasso where PSP Verstage stack is mapped to a virtual address space this check fails causing a bounce buffer to be used and hence a stack overflow. Fix this issue by assuming that the buffer comes from the SRAM always in such SoCs and pass the buffer directly to crypto engine. BUG=b:259649666 TEST=Build and boot to OS in Dalboz with unsigned PSP verstage. Change-Id: I2161c8f0720c770efa5c05aece9584c3cbe7712a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-10-20device/device.h: Rename pci_domain_scan_busArthur Heymans
On all targets the domain works as a host bridge. Xeon-sp code intends to feature multiple host bridges below a domain, hence rename the function to pci_host_bridge_scan_bus. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I4e65fdbaf0b42c5f4f62297a60d818d299d76f73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78326 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-10-20soc/intel/cannonlake: Support Comet Lake v1 and v2 in one buildJonathon Hall
Define SOC_INTEL_COMETLAKE_1_2, which creates a build supporting both Comet Lake v1 and v2 by including both sets of FSP binaries and selecting one based on the CPUID. A mainboard can select this instead of SOC_INTEL_COMETLAKE_1 or ..._2 to support all CML-U steppings in one build. Change-Id: Ic8bf444560fd6b57064c47faf038643fabde010e Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78345 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
2023-10-19soc/intel/meteorlake: Update TBT PCIe Reg Map offsets for QSRavi Sarawadi
Within TBT PCIe, following register offsets have been updated for production silicon. Update ASL with new offsets. 1. MPC - Miscellaneous Port Configuration Register 2. RPPGEN - Root Port Power Gating Enable 3. SMSCS - SMI/SCI Status Register BUG=306026121 TEST= Check TBT PCIe Tunnel creation and device enumration. Change-Id: I0497f7108ef5046c2694aece232263582514a0c5 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-19soc/intel: Improve CONFIG_ACPI_SOC_INTEL_SLP_S0_FREQ_HZ useJeremy Compostella
Commit bd9c562a9e0c6af65f5e798a17ba9a55892ef082 ("acpi: Configure slp-s0 residency counter frequency in LPIT table") led to jenkins reporting the following error: !!!!! Error: defined(CONFIG_ACPI_SOC_INTEL_SLP_S0_FREQ_HZ) used at src/include/acpi/acpi.h:457. Symbols of type 'hex' are always defined. Since hex Kconfig are always defined there is no need to test it being defined but also no need to handle zero or non-zero values. In addition: 1. This config was defined in Meteor Lake specific Kconfig file while it should actually be define closer to where it is being used (here soc/intel/common/block/acpi/Kconfig) and only set by the SoC Kconfig. 2. Once moved and under control of `SOC_INTEL_COMMON_BLOCK_ACPI_LPIT' gating (lpit.c), the Kconfig name needed to be adjusted to better fit its use. 3. Make Meteor Lake Kconfig sets the config but does not define it anymore. TEST=LPIT ACPI table Counter Frequency field is set to 0x2005 on rex Change-Id: I2083c9209e61be6180cca2c9f74097e2f4b4ce9a Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78458 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-19soc/intel/alderlake: Fix incorrect microcode commentsMichał Żygowski
The microcode for RPL-S C0 and H0 is actually available, however, the name of the file contained a typo: 06-b7-05 vs 06-bf-05. Fix the typos in the comments. Moreover, the ADL-S C0/H0 microcode file 06-97-05 has the same sha256 sum as the equivalent RPL-S C0/H0 microcode file 06-bf-05. The sha256 sum of ADL-S/RPL-S C0/H0 microcode on intel-microcode tag microcode-20230808: 5d8d4a4d5456c43b7cc04937c80aec094ccbf3bd89f34ffa5182913ef944a9f9 Update the comments to correctly indicate supported CPU steppings. Change-Id: I4c848e0dfc40f6c8e26a9b31e7c4cf4c5a09128f Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78413 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-19vc/intel/raptorlake: Use FSP v4301.01 headers for GoogleNick Vaccaro
Remove the existing FSP 4221.00 headers subdirectory called 4221.00_google, and have Google vendor devices use FSP 4301.01. BUG=b:306181828 TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to kernel. Change-Id: Ic64b3aec62f0d6302278393bf06d090f43c0d592 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: <srinivas.kulkarni@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-18soc/intel/mtl: Set slp-s0 counter frequencySukumar Ghorai
System sleep time (SLP_S0 signal asserted) is measured in ticks, for Meteor Lake soc in 122us (i.e. ~8197Hz) granularity/ticks. Change-Id: I1e95cd69e941d4d72d5c36a07660ca07ee2499ba Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-18soc/intel/{adl, mtl}: Avoid redundant display init by joining to MBUSSubrata Banik
This patch ensures that the IGD joins the MBUS when the firmware splash screen feature is enabled (aka BMP_LOGO config is enabled). For ChromeOS platform, it prevents the i915 driver from reinitializing the display, which can save up to 75ms-80ms of boot time and eliminate a brief period of blank screen between the firmware splash screen and the OS login prompt. BUG=b:284799726 TEST=Able to build and boot google/rex. Change-Id: I36af167afa902053a987602d494a8830ad9b1b1a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 21:21:20 +0000