summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2021-06-04soc/mediatek/mt8195: add SPM loaderDawei Chien
This patch adds support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. TEST=program counter of SPM is correct value after booting up. Change-Id: Ia0f9b9f86e44b293c1cc47213946304c64aea75e Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55140 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/mediatek: Extract spm_parse_firmware to commonRex-BC Chen
spm_parse_firmware can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I54d9672aa9ee9078ec9fe3fa4f2e9fe860a50636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55139 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S storage related configsLean Sheng Tan
Further add initial Silicon UPD storage settings: - SATA - SD card - eMMC Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Id4145fcf156756a610b8a9a705d4ab99fe7b0bf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD RP & USB related configsLean Sheng Tan
Further add initial Silicon UPD settings for: - PCIe root ports - USB Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I60afb78a7997b8465dd6318f3abee28f95a65100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55034 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD configs for graphic & chipsetLean Sheng Tan
Further add initial silicon UPD settings for: - graphics & display - chipset lockdown - PAVP - legacy timer - PCH master gating control - HECI This CL also enables HECI 1 in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I657f44f8506640c23049614b2db9d1837e6d44ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/54960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-03soc/intel/alderlake: Add new memory parts for ADL boardsAmanda Huang
Use currently global_lp4x_mem_parts.json.txt to regenerate SPD files for LP4x memory parts that can be used with ADL-based mainboards. BUG=b:186616388 Change-Id: I5e76a887f81d432adbcfc2f8956b44f4343db5c2 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-03soc/mediatek: Initialize SSPMRex-BC Chen
Load SSPM firmware and boot up SSPM in ramstage. This adds 23ms to the boot time. TEST=Load SSPM blob ok, and we can see some logs of SSPM from AP. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia227ea9f7d58129068cb36ec2de7d9feb677006b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-02soc/amd/picasso: remove warm reset flag codeFelix Held
Since the MCA(X) registers have defined values on the cold boot path, the is_warm_reset check can be dropped. Also the warm reset bit in the NCP_ERR register doesn't behave as the PPR [1] suggested; no matter if something was written to the register or the machine went through a warm reset cycle, the NCP_WARM_BOOT bit never got set. [1] checked with PPR for AMD Family 17h Models 11h,18h B1 (RV,PCO) #55570 Rev 3.15 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e6df98ffd5d15ca204c9847a76c19c753726737 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-01soc/amd/cezanne/include/iomap: properly align definesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I14647b3d88146602b96fc1dff2347a293bab0c26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01soc/amd/picasso: introduce and use chipset device treeFelix Held
The chipset devicetree only has the essential PCIe devices enabled that are needed for the SoC code to work. It also defines aliases for all PCIe devices that can be used to reference the devices in the mainboard- specific devicetrees and devicetree overrides. To make the change easier to review that part will be done in a follow-up patch. Despite missing in the PPR, device pci 18.7 exists on Picasso. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b7c3fd32579a23539594672593a243172c161c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01acpi: drop unused parameter from acpi_soc_fill_bertFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic354824468f016a7857c6990024ae87db6fd00bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/55052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao
2021-06-01soc/mediatek: Move the SSPM driver to commonRex-BC Chen
The SSPM driver can be shared by MT8183, MT8192 and MT8195. TEST=emerge-{asurada, kukui} coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If9779853becb298eeeabb3dc6096bc474baae202 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55050 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01soc/intel/elkhartlake: Update FSP-S UPD LPSS related configsTan, Lean Sheng
Add Silicon upd settings for LPSS (GSPI/UART/I2C). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ib0c3cd1d37ff9892d09d6d86ac50e230549c7e53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-05-31soc/amd/cezanne: Add pre-FSPM call to the mainboardMartin Roth
The Guybrush platform needs to set up some GPIOs immediately before the FSP-M runs. Add a platform specific call. This will be used in a follow-on commit. BUG=b:184796302, b:184598323 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I37d2625ff426347852e98a9a50f15368e0213449 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54638 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-30soc/amd/common/block/espi: Explicitly assert PLTRST#Raul E Rangel
PLTRST# is currently asserted and latched when eSPI_RST# gets asserted. If eSPI_RST# isn't used on a platform or it doesn't properly assert in all cases, then PLTRST# will never be asserted. This could result in the AP and EC being out of sync. BUG=b:188188172, b:188935533 TEST=Warm reset guybrush with partial #22 rework. Verify that peripheral channel is correctly reset. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I20d12edf3efc6100096e24aa8d1aec76bbde264f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-30soc/intel/alderlake: Add placeholder SPD fileTim Wawrzynczak
Change-Id: I38eb4bb684c511fff5ae148091c066682e9c35cb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-30soc/intel/elkhartlake: Update FADT tableTan, Lean Sheng
Update FADT table per relevant PM settings: Fix PM Timer block access size and disable C2 and C3 states for the CPU. Further on, set the century byte offset in FADT to point to the common location in CMOS. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I72a57bf8ec61c3eabc4522c2695ae4b16979f188 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54958 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-30soc/intel/elkhartlake: Update FSP-M UPD related configsTan, Lean Sheng
Upload the FSP-M UPD configs. This CL also updated the chip.h and devicetree.cb with the relevant variables and configs. This CL also updated the GPIO related settings (PMC & SD card) in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If6321064b37535b390cf3dd7c41a719c598a0cd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-05-28soc/amd/picasso: fix MCACHE on psp_verstage RO bootKangheui Won
On RW boot path psp_verstage call cbfs_map which calls chain of _cbfs_alloc, cbfs_boot_lookup and cbfs_get_boot_device. Then cbfs_get_boot_device initializes MCACHE which is used later. However on RO boot path psp_verstage doesn't try to find anything in the CBFS which results RO MCACHE not to be initialized. Add cbfs_get_boot_device(true) to explicitly initialize MCACHE on recovery boot. BUG=b:177091575 BRANCH=none TEST=build and boot jelboz Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I6c4b522fef5a4affd215faa122bdf6b53190cf3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54711 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27soc/amd/common/block: Fix missing include in acp.hRaul E Rangel
We were missing the stdint.h header, and the header was sorted incorrectly in chip.h BUG=non TEST=build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I209d3c9c48e5b06b2a56759af51cf2858eb99f51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-27soc/amd/picasso: add devicetree setting for PSPP policyFelix Held
Since the default for the corresponding UPD of the Picasso FSP is DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE, add a deviectree setting for each board that's using the Picasso SoC code to not change the setting for the existing boards. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-27soc/amd/cezanne: add devicetree setting for PSPP policyFelix Held
This allows boards to specify which PSPP policy (basically a dynamic trade-off between power consumption and PCIe link speed) should be used and also makes sure that the boards are using the expected PSPP policy and not just the UPD default from the FSP binary that has already changed once during the development. BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1b6459b2984711e72b79f5d4d90e04cb4b78d512 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54930 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27soc/intel/tigerlake: Return TBT PowerResource from PR0 and PR3John Zhao
TBT PowerResource _ON/_OFF methods are currently invoked by _PS0 and _PS3 respectively. It is defined for ACPI driver to call _ON and _OFF methods. This change drops the _PS0 and _PS3 call for _ON/_OFF and returns TBT PowerResource declaration in the _PR0 and _PR3, then ACPI driver will call the TBT PowerResource _ON and _OFF methods. BUG=b:188891878 TEST=Traced both of TBT _ON and _OFF methods invocation and execution at run time. Verified TBT's power_state to be D3Cold. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I398b3f58ec89f98673cbbe633149d31188ec3351 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-26soc/amd/picasso/mca: use MCAX registers instead of legacy MCAFelix Held
This patch also adds the additional 10 MCAX registers to the BERT MSR error record. BUG=b:186038401 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I31912d3b3e77e905f64b6143042f5e7f73db7407 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-26soc/intel/alderlake: Update soundwire master countSugnan Prabhu S
This patch includes changes to update the soundwire master count. Change-Id: Iffaf90569c19fb5ca3ce4775cc6dc6f8093f7c52 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-26soc/intel/common: Implement TBT firmware authentication validity checkJohn Zhao
After Thunderbolt firmware is downloaded to IMR, its authentication validity needs to be checked. This change implements the valid_tbt_auth function. Thunderbolt DSD and its corresponding IMR_VAID will be present to kernel only if its authentication is successful. BUG=b:188695995 TEST=Validated TGL TBT firmware authentication and its IMR_VALID into SSDT which is properly present to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3c9dda341ae6f19a2a8c85f92edda3dfa08c917a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-26soc/intel/alderlake: Add validity for TBT firmware authenticationJohn Zhao
After Thunderbolt firmware is downloaded to IMR, its authentication validity needs to be checked. This change adds the TBT firmware IMR status register offset and its authentication valid bit for valid_tbt_auth function usage. BUG=b:188695995 TEST=Built coreboot image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I742a00b6b58c45c1261f06b06a94346ad0a74829 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54888 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/intel/tigerlake: Add validity for TBT firmware authenticationJohn Zhao
After Thunderbolt firmware is downloaded to IMR, its authentication validity needs to be checked. This change adds the TBT firmware IMR status register offset and its authentication valid bit for valid_tbt_auth function usage. BUG=b:188695995 TEST=Built Voxel coreboot image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia25827f18a10bf4d2dcabfe81565ac326851af3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54709 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/amd/cezanne: add support for the changed AMD FSP API for USB PHYJulian Schroeder
The AMD FSP is using a new structure for USB and USB C phy settings. This patch removes old, unused structures, adds the new one and enables the devicetree interface for it. Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: I011ca40a334e4fd26778ca7f18b653298b14019b Reviewed-on: https://review.coreboot.org/c/coreboot/+/54065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-26soc/intel/elkhartlake: Minor fix for SCS & XHCI devices in ACPITan, Lean Sheng
1. Remove the extra UAB devices in xhci.asl 2. Update SD controller ADR in scs.asl 3. Remove the unused SCS PID Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I1906fb4e6893dc5e2b0bc8d85f4a7b2efc85c3a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54867 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/intel/elkhartlake: Update SA & IGD DIDs TableTan, Lean Sheng
Update SA & IGD DIDs table as per latest EDS (Doc no: 601458). Add extra SKUs and fix the mismatched SKU numbers accordingly. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I62fd9e6a7cf0fc6f541f3d6d9edd31d41db7279f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-05-26soc/intel/common/block/smbus: Use `pci_dev_read_resources()` in read resourcesPaul Menzel
scan-build found a dead assignment, that the value stored to `res` is never read. Use `pci_dev_read_resources()` instead, as done in `sb/intel/common/smbus_ops.c` since commit 5f734327 (sb/intel/common/smbus_ops.c: Clean up read resources) avoiding the assignment. Change-Id: Ic59063b05a45dca411bf5b56c1abf3dd66ff0437 Found-by: scan-build (coreboot toolchain v0ad5fbd48d 2020-12-24 - clang version 11.0.0) Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54904 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26qemu-q35,xeon_sp: Drop HAVE_SMI_HANDLER conditional with smm-classAngel Pons
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I64bdcb28a996609111861ebafe172493b0650354 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54852 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Rocky Phagura Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/amd/common/block/espi: Fix typo in espi_setup_periph_channelRaul E Rangel
ESPI_SLAVE_CHANNEL_READY is a read-only bit from the host perspective. It is set when the eSPI peripheral has configured the channel. We actually want to set the ESPI_SLAVE_CHANNEL_ENABLE flag. This never caused an issue before because the peripheral channel is enabled by default after PLTRST# is deasserted. This does fix the case where periph_ch_en == 0. It now properly clears the enable flag. BUG=b:188188172, b:188935533 TEST=Boot guybrush to OS, perform warm reset Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I24e0734d5652601ae9c967da528fec5e3f780991 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-26soc/mediatek/mt8195: Initialize MCUPMalex.miao
Load MCUPM firmware and boot up MCUPM in ramstage. TEST=can see MCUPM log from AP console Signed-off-by: alex.miao <alex.miao@mediatek.corp-partner.google.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I9e8c45ce7166644b94319ec2e7836d3d3c8008dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/54899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-26soc/mediatek: Move the MT8192 MCUPM driver to commonRex-BC Chen
The MPUCM drivers can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I07a66bcf5a149582f34df1cfd08b5514fc5c2eb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-26soc/mediatek/mt8195: Change fsrc source to ulposcchun-jie.chen
Set fsrc source to ulposc_d10 for 26m off low power scenario. Signed-off-by: chun-jie.chen <chun-jie.chen@mediatek.com> Change-Id: Ifb02d32820944d7cfbbf23de638e9a0e82b5e84d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54870 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-25soc/amd/common/block/espi: Increase ESPI_CH_READY_TIMEOUT_US to 10msRaul E Rangel
The ChromeEC might take longer than 1ms for the peripheral channel to be enabled. The PLTRST# interrupt handler takes about ~539us. This doesn't account for the time it takes for the interrupt handler to be scheduled. Increasing the timeout to 10ms gives ample time. BUG=b:188188172, b:188935533 TEST=Boot guybrush and no longer see channel enable errors Suggested-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib6db577bf06175ceb17b446af706ad8c9f891481 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54788 Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-25soc/intel/alderlake: Fix SA_DEVFN_CPU_PCIE6_*Tim Wawrzynczak
Change-Id: I8849f6dd2a9fdb16642de423cc82dcefd5b192ac Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54682 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22soc/amd: reduce MCACHE size with psp_verstageKangheui Won
The default of CBFS_MCACHE_SIZE is increased to 0x4000 in CB:54146 but we have limited space on the PSP thus cannot afford it. BUG=b:177091575 BRANCH=none Signed-off-by: Kangheui Won <khwon@chrmoium.org> Change-Id: I94dd782ae00d0b18ad6dd2fc061e4318bda88579 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-22util/spd_tools/lp4x: Add new memory part to to global memory definitionDtrain Hsu
This new definition is for MT53E512M32D1NP-046 WT:B used on Cret. BUG=b:183057749 TEST=Generate SPDs Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ica5df61d96d2c4cbe62a560a53bd3bd08eb121f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-22soc/amd/cezanne,picasso/reset: use byte I/O read for NCP_ERRFelix Held
NCP_ERR is a 1 byte register in I/O-space, so use inb and not inw. The variable the result gets assigned to is also a uint8_t. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9fd8c139004111d6227c0316ba2a8b0281541654 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-21soc/intel/common: Add Alder Lake device IDsSumeet R Pawnikar
Add Alder Lake specific Host and Graphics device IDs. As per latest document number: 619501, these IDs got an update. Change-Id: I548a903714ccc7470f1425ac67c0c66522437365 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54674 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21soc/amd/cezanne,common,picasso: use BERT region reserved by FSP driverFelix Held
commit ce0e2a014009390c4527e064efb59260ef4d3a3b (drivers/intel/fsp2_0: use FSP to allocate APEI BERT memory region) adds a mechanism to reserve the BERT region inside the coreboot code, so we can get rid of the workaround to reserve it in the FSP and return the location in a HOB. mcfg->bert_size defaults to 0 which makes the FSP not generate the corresponding HOB, but that field is planned to be removed at least on Cezanne, so don't explicitly set it to 0. BUG=b:169934025 TEST=BERT table that gets generated in a follow-up patch for Picasso points to expected BERT region and Linux is able to access, decode and display it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaca89b47793bf9982181560f026459a18e7db134 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52584 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21soc/intel/common: Add function to lpc_lib to return PIRQ routingTim Wawrzynczak
In order to fill out static entries for a _PRT table for soc/intel/common, the PIRQ<->IRQ mapping is required. This patch adds a function lpc_get_pch_pirq_routing() which returns this mapping. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib215fba54573c50a88aa4584442bd8d27ae017be Reviewed-on: https://review.coreboot.org/c/coreboot/+/50858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-20soc/intel/xeon_sp: Skip locking down TXT related registersArthur Heymans
When locking down TXT is skipped, e.g. to do error injection, locking down DMI3 and IIO DFX related TXT registers should also be skipped. Change-Id: Ieef25c02ec103eaef65d8b44467ccb9e6917bb6c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50238 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Rocky Phagura Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20soc/intel/broadwell: Use Lynx Point IOBP codeAngel Pons
Change-Id: I89832dd6089e1961b4ffdb5661dc98b26a5cb0a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52515 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20soc/amd/common: Show espi init in logMartin Roth
BUG=None TEST=See espi init messages in the log. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I9f856402ed9a026427d3529e6d61450b0623fe48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20soc/intel/xeon_sp: Remove superfluous printkArthur Heymans
This debug output is not very useful. If CONFIG_BOOTBLOCK_CONSOLE is enabled there will already be something else printed on the console before this. Change-Id: I7c6013805497604bb6a42ed4f9fdc594a73c28f1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Rocky Phagura
2021-05-20baytrail: Factor out INT15 handlerAngel Pons
The handler is the same on all Bay Trail mainboards. Factor it out. Change-Id: Ia1b6faaca4792cda5f14948d23498182bf4bb2c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54415 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Máté Kukri <kukri.mate@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19sc7280: Reserve wlan & wpss dram memory regionsRavi Kumar Bokka
Change-Id: Ic98b5d08a0a7b3f772582bf85d94f901a7c53010 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19sc7280: memlayout changes for QCSDI & WMM featuresamrab
Change-Id: If5ebcc9a35e0b86321045ef44bb4874144c6402f Signed-off-by: Sudheer Kumar Amrabadi <samrab@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19sc7280: add qclib supportRavi Kumar Bokka
* Qclib_Ver: BOOT.MXF.1.0-00745-KODIAKLC-2 * Chipcode_Release_Tag: r00003.1 Change-Id: I2d400f0ad96dbef2e45cc1f11ed17ea95fc60d16 Signed-off-by: Sudheer Kumar Amrabadi <samrabad@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19soc/amd/common/block/espi_util: Work around in-band reset race conditionRaul E Rangel
When performing an in-band reset the host controller and the peripheral can have mismatched IO configs. i.e., The eSPI peripheral can be in IO-4 mode while, the eSPI host will be in IO-1. This results in the peripheral getting invalid packets and thus not responding. This causes the NO_RESPONSE status bit to be set and cause eSPI init to fail. If the peripheral is alerting when we perform an in-band reset, there is a race condition in espi_send_command. 1) espi_send_command clears the interrupt status. 2) eSPI host controller hardware notices the alert and sends a GET_STATUS. 3) espi_send_command writes the in-band reset command. 4) eSPI hardware enqueues the in-band reset until GET_STATUS is complete. 5) GET_STATUS fails with NO_RESPONSE and sets the interrupt status. 6) eSPI hardware performs in-band reset. 7) espi_send_command checks the status and sees a NO_RESPONSE bit. As a workaround we allow the NO_RESPONSE status code when we perform an in-band reset. BUG=b:186135022 TEST=suspend_stress_test and S5->S0 tests on guybrush and zork. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I71271377f20eaf29032214be98794e1645d9b70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-19soc/amd/cezanne/fch: add PCIe GPP clock generator configuration settingsFelix Held
I'm not 100% sure if this should rather be duplicated from Picasso or commonized. Checked with the docs and this won't be compatible with Stoneyridge and one future product's PPR lacked the corresponding register. Some other chip has a compatible register layout, but a different number of PCIe GPP clock outputs, so the common code would need to use some SoC-dependent defines and possibly a SoC-specific lookup table for the mapping which is also not that great. TEST=Checked Cezanne PPR Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b6d0cb8d7eb0288d8a18fcb975dc377b2c6846a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54685 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19soc/amd/picasso: move gpp_clk_req_setting definition to chip.hFelix Held
Since this enum is only used for the devicetree settings and not for the hardware itself, move it from the southbridge header to the chip one. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0907fc5cba9315fec5fabff67d279c6d95d1c9f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54684 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18soc/intel/alderlake: Add handling of GPIO_COM3 in gpio.aslMaulik V Vaghela
We were not adding power management handling of GPIO_COM3 in gpio.asl This can affect s0ix flow where platform won't go into s0ix since GPIO_COM3 is not power gated. BUG=b:188392183 BRANCH=None TEST=Platform should enter to s0ix and GPIO COMM3 should not block an entry to s0ix. Change-Id: I3f269c66bdd6337adb0d2bd29d0b7d72ced19ec4 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18cpu/x86: Only include smm code if CONFIG_HAVE_SMI_HANDLER=yArthur Heymans
This removes the need to include this code separately on each platform. Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-18intelblocks/gpio: Add NAVFWE bit to PAD_CFG_DW0 mask definitionMaulik V Vaghela
Definition for NAV_FWE BIT was added in commit e6e8b3d Even if try to set this BIT it was not getting set since PAD_CFG_DW0 mask will make it 0 since this bit was not part of mask. Adding NAV_FWE to mask will resolve this issue and BIT will be set/unset as per programming in mainboard. TEST=Check GPIO register dump and see if BIT is getting set properly. Change-Id: I970ae81ed36da45c3acc61814980b2e6ff889445 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54350 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18soc/intel/alderlake: mb/intel/sm: Add tcss codeDeepti Deshatty
Enable FSP 'MultiPhaseSilicon' init to execute tcss configure during silicon init. Type-c aux lines DC bias changes are propagated from tigerlake platform. TEST=Verified superspeed pendrive detection on coldboot. Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: Ifce6abb0fce20e408931b904426131a42a5a4a36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18soc/mediatek/mt8195: enable ARM64_USE_ARM_TRUSTED_FIRMWAREYidi Lin
Enable ATF configuration to support multi-core. TEST=boot to kernel with multi-core support. BUG=b:177593590 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id1ef29894fa3a6022574c3874dee62617133b12c Reviewed-on: https://review.coreboot.org/c/coreboot/+/53898 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16soc/amd/*/Makefile.inc: Strip the quotesZheng Bao
PSP_SOFTFUSE_BITS used to be like this: 15 0 29 "28 6" It causes internal shell report error: /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file Change-Id: I716f19d37fb57b9ef3fc7259c6dcca7d21022d32 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-16soc/intel/alderlake: Update meminit code due to upd changes FSP 2147 onwardsBora Guvendik
DisableDimmMc0Ch0 upds changed to DisableMc0Ch0 in new FSP releases. The definition of the upd also changed. Changed FSP meminit code to work based on new definition of the UPDs. Before: 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs After: 0:Enable, 1:Disable TEST=Boot to OS Cq-Depend: chrome-internal:3831865, chrome-internal:3831864, chrome-internal:3831913 Cq-Depend: chromium:TODO Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I5af11ae99db3bbe3373a9bd4ce36453b58d62fec Reviewed-on: https://review.coreboot.org/c/coreboot/+/54036 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2162_00Ronak Kanabar
The headers added are generated as per FSP v2162_00. Previous FSP version was v2117_00. Changes Include: - Adjust UPD Offset in FspmUpd.h and FspsUpd.h - Remove DisableDimmMc*Ch* Upds in FspmUpd.h - Add DisableMc*Ch* Upds in FspmUpd.h - Few UPDs description update in FspmUpd.h and FspsUpd.h Change DisableDimmMc*Ch* to DisableMc*Ch* in meminit.c to avoid compilation failure other change related to UPDs name change will be part of next patch in relation chain. BUG=b:187189546 BRANCH=None TEST=Build and boot ADLRVP using all the patch in relation chain. Change-Id: Ic8d7980146f1bfc96472ef504cf9f16eee63a13e Cq-Depend: chrome-internal:3831865, chrome-internal:3831864, chrome-internal:3831913 Cq-Depend: chromium:TODO Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54083 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14soc/intel/tigerlake: Allow devicetree to fill UPD related to TCSS OCNick Vaccaro
We need to change OC pin for type C USB3 ports and it depends on the board design. Allowing it to be filled by devicetree will make it easier to change the mapping based on the board design. BUG=b:184660529 TEST="emerge-volteer coreboot" compiles without error. Change-Id: I5058a18b1f4d11701cebbba85734fbc279539e52 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-14soc/intel/alderlake: Update CPU and IGD Device IDsMaulik V Vaghela
Updated CPU ID and IGD ID for Alder Lake as per EDS. TEST=Code compilation works and coreboot is able to boot and identify new device Ids. Change-Id: I2759a41a0db1eba5d159edfc89460992914fcc3c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14soc/intel/alderlake: Add known GPIO virtual wire informationDeepti Deshatty
GPIO communities 0, 1, and 4 have virtual wire indexes & bits for at least some of their groups; add the known information into the community definitions. This patch is ported form tigerlake. Change-Id: I2f1e2413d06e8afe4233d7111763cb45b78f845b Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14soc/intel/alderlake: Add known CPU Port IDs for GPIO communitiesDeepti Deshatty
Change-Id: Id5fa5b10edeb3445a2d2453d9122376041577598 Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14soc/intel/alderlake: Add IOM PCR PIDDeepti Deshatty
Required for accessing IOM REGBAR space. Change-Id: I883acfa6aa41758e3c8636c94fbee920397fce8b Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14soc/mediatek/mt8195: Initialize DRAM in romstageRex-BC Chen
Initialize DRAM in romstage and configure to support fast calibration. Change-Id: I89b87be62c8e88ae4a620d56aa7a35e47f97952d Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54229 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14soc/mediatek: Remove duplicate enum declarationRex-BC Chen
Remove dram_cbt_mode in dramc_soc.h. TEST=emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idc4a3887c9cc3f77cbdd7282e2977f6df858817d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
2021-05-14soc/amd/cezanne: Enable GFX HDA FSP UPDKarthikeyan Ramasubramanian
By default, FSP disables the GFX HDA. Enable it to support HDMI Audio functionality. BUG=b:186479763 TEST=Build and boot to OS in guybrush. Ensure that the GFX HDA is enumerated in lspci output. 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1637 Change-Id: I42cb26c44bbca3d937c5d52736c42468139f7b07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54100 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13src: Match array format in function declarations and definitionsPatrick Georgi
gcc 11.1 complains when we're passing a type* into a function that was declared to get a type[], even if the ABI has identical parameter passing for both. To prepare for newer compilers, adapt to this added constraint. Change-Id: I5a1b3824a85a178431177620c4c0d5fddc993b4f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-13soc/mediatek/mt8195: change vpp_sel default mux for 4k supportNancy.Lin
vpp_sel and ethdr_sel are vdosys clock source select mux. Steps to change to support 4K source. 1. Change vpp_sel source to mainpll_d4 to run at 546MHz 2. Change ethdr_sel source to univpll_d6 to run at 416MHz Signed-off-by: Nancy Lin <nancy.lin@mediatek.com> Change-Id: Ib6518ed6204528489c41e7161534bbd3734ac851 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54082 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/mediatek/mt8195: configure DMA buffer in DRAMRex-BC Chen
Set DRAM DMA to be non-cacheable to load blob correctly. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I819d40431fc7c9e7549686736d9e70de1c1982f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54052 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/mediatek/mt8195: Enable SCP SRAMRex-BC Chen
Enable SCP SRAM to allow module in SCPSYS to access DRAM. TEST=AFE acess DRAM successfully Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I40862f8d74e5aa17361f1c91ea31a10b0a4ffb31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54014 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/amd: factor out acpigen_write_alib_dptc to common codeFelix Held
Also drop unneeded intermediate cast to void * before casting the address of the struct dptc_input type variables to uint8_t *. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie1e2aa1ec728a4e16d3a587d7400cdfc8962f443 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-13soc/amd/cezanne/root_complex: generate DPTC ACPI methodFelix Held
This adds support for convertible devices to support different maximum power and thermal configurations. The dynamic power and thermal configuration (DPTC) via ACPI ALIB calls allows to change the parameters during runtime. This code contains the assumption that \_SB.PCI0.LPCB.EC0.TBMD exists when ACPI code calls the DPTC method. At the moment only chromeec declares EC0.TBMD, but it's also the only code that calls the DPTC method. The definition of DPTC_INPUTS isn't moved to the common code directory, since it's currently unsure if we might need to configure more than those 4 parameters for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibdfc056cb325a32d87505dd93e01c9af81dfd6c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-12soc/amd/cezanne/chip.h: add DPTC and tablet mode optionsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I39218b79a79f1ccaf1a58408c6bb5161acea64aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/54073 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12psp_verstage: remove not-implemented files for cezanneKangheui Won
Cezanne PSP is missing implementations for some svc apis. Do not include files related to missing svc apis. This CL should be reverted after the cezanne PSP supports these functions. BUG=b:187906425 Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ibaab4e8435624d403ef18e980146ebfd1598b61b Reviewed-on: https://review.coreboot.org/c/coreboot/+/53905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-12soc/amd/{common,picasso}: Use common PCIE_GPP_DRIVER driverRaul E Rangel
This will change the names of the GPP bridges, but this ok since there is no hand written ASL that references these names. BUG=b:184766519 TEST=Boot picasso and dump ACPI Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic09200156e8a37bd1a29ca95a17c8f8ae2b92bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54028 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12soc/amd/common/block/pci: Capitalize PCI ACPI namesRaul E Rangel
Lowercase characters are not valid ACPI identifiers. BUG=b:184766519 TEST=Boot picasso to OS and verify ACPI errors are no longer printed. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I75aca67f4607e97ced8ac00ac68e51c359aff944 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-12soc/amd{common,cezanne}: Move pcie_gpp.c to commonRaul E Rangel
Cezanne and Picasso can now use the same driver. BUG=b:184766519 TEST=Boot guybrush and dump ASL. Verified it didn't change. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie4ede82935d6c69b323c1fdceaa61e306aa2820a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-11docs: correct and rewrite documentation regarding n/c / unused padsMichael Niewöhner
Intel PDGs starting from Skylake / Sunrise Point state that, different from the general recommendation in digital electronics, unconnected GPIOs defaulting to GPIO mode do explicitly not require termination. The reason for this is, that these GPIOs have the `GPIORXDIS` bit set, which effectively disconnects the pad from the internal logic by disabling the input buffer. This bit - besides `GPIOTXDIS` - can also be set explicitly by using the gpio macro `PAD_NC(pad, NONE)`. In some cases, a pull resistor may be required due to bad board design or when a vendor sets the RX/TX disable bits together with a pull resistor and schematics are not available to check if the pad is really unconnected or just unused. In this case the pull resistor should be kept. Pads defaulting to native functions usually don't need special handling. However, when pads requiring external pull-ups are missing these due to bad board design, they should be configured with `PAD_NC` to disconnect them internally. Rewrite the documentation to reflect these new findings. Also clarify the comment in soc/intel gpio code accordingly. Change-Id: Id01b197ebe8f2b8bb4ecf3d119ec2298b26d9be0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52139 Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/amd/picasso: Disable CBFS MCACHE againRaul E Rangel
This is still causing boot errors on zork: coreboot-4.13-3659-g269e03d5c42f Fri May 7 22:03:11 UTC 2021 bootblock starting (log level: 8)... Family_Model: 00820f01 PSP boot mode: Development Silicon level: Pre-Production Set power off after power failure. PMxC0 STATUS: 0x800 BIT11 I2C bus 3 version 0x3132322a DW I2C bus 3 at 0xfedc5000 (400 KHz) FMAP: area COREBOOT found @ 875000 (7909376 bytes) ASSERTION ERROR: file 'src/commonlib/bsd/cbfs_mcache.c', line 106 BUG=b:177323348 TEST=Boot ezkinil to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I68b4b73670e750207414f0d85ff96f21481be8ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/53933 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8192: add apusys init flowChien-Chih Tseng
Setup APU mbox's functional configuration registers. BUG=b:186369803 BRANCH=asurada TEST=boot asurada correctly Signed-off-by: Chien-Chih Tseng <chien-chih.tseng@mediatek.com> Change-Id: If05a8af1a2f96598adcf70e15003e4f5dc94e337 Signed-off-by: Flora Fu <flora.fu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48622 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8195: Enable and initialize eintYidi Lin
eint event mask register is used to mask eint wakeup source. All wakeup sources are masked by default. Since most MediaTek SoCs do not have this design, we can't modify the kernel eint upstream driver to solve the issue 'Can't wake using power button (cros_ec) or touchpad'. So we add a driver here to unmask all wakeup sources. Change-Id: I703d87e3dc49cf4e0b7ff0c75a6ea80245dd73d3 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54007 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8195: Disable UFS reference clockYidi Lin
UFS reference clock (refclk) is enabled by default, which will cause the UFSHCI to hold the SPM signal and lead to suspend failure. Since UFS kernel driver is not built-in, disable refclk in coreboot stage. Change UFSHCI base register to 0x11270000. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I1386e59f802a9e3c938a7e8dbeea547fbcb02709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10src: Drop "This file is part of the coreboot project" linesAngel Pons
Commit 6b5bc77c9b22c398262ff3f4dae3e14904c57366 (treewide: Remove "this file is part of" lines) removed most of them, but missed some files. Change-Id: Ib8e7ab26a74b52f86d91faeba77df3331531763f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-10soc/intel/cannonlake: Merge soc_memory_init_params() into its callerFelix Singer
soc_memory_init_params() does not only configure memory init parameters. Despite its name, it also configures many other things. Therefore, merge it into its caller function platform_fsp_memory_init_params_cb() to prevent confusions. Built clevo/l140cu with BUILD_TIMELESS=1. coreboot.rom remains the same. Change-Id: Id3b6395ea5d5cb714a412c856d66d4a9bcbd9c12 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52491 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/intel/skylake: Set proper defaults in chipset devicetreeFelix Singer
LPC, P2SB and Power Management controller are always needed. Thus, enable them by default. Change-Id: I20b8cbe536da70fccc3d11e1eedf4a5e14bfc862 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-10soc/intel/adl: Allow mainboard to fill CmdMirror and DqDqsRetrainingMaulik V Vaghela
We need to modify update CmdMirror and LpDdrDqDqsRetraining parameters for ADLRVP board. Allowing this parameters to be filled by devicetree will allow flexibility to update values as per board designs. Note that both UPDs are applicable for both DDR and Lpddr memory types. BUG=None BRANCH=None TEST=Build works and UPD values have been filled correctly Change-Id: I55b4b4aee46231c8c38e208c357b4376ecf6e9d9 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-10soc/amd/picasso: move acpigen_dptc_call_alib to new common alibFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib0f7da12429b6278d1e4bc5d6650c7ee0f3b5209 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10Revert "soc/amd/common/espi: Don't set alert pin in espi_set_initial_config"Raul E Rangel
This reverts commit 6eced03b25954e370e20e62f2cbe41f9d5626eae. This prevents zork from booting. We get the following error: eSPI cmd0-cmd2: 00080009 00000000 00000000 data: 00000000. Error: unexpected eSPI status register bits set (Status = 0x10000010) Error: Slave GET_CONFIGURATION failed! This isn't a pure revert. It is more of a fix that keeps the old behavior. BUG=b:187122344 TEST=Boot zork an no longer see eSPI error Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If75a35d3994b0fd23945a450032d3cc81abeb136 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53932 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/amd/cezanne: Force resets to be coldMarshall Dawson
Cezanne must use cold resets. Change the warm reset request to always set TOGGLE_ALL_PWR_GOOD. And, since the bit is sticky across power cycles, set it early for good measure. BUG=b:184281092 TEST=Majolica successfully resets using 0xcf9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I7d4ca5665335b20100a5c802d12d79c0d0597ad9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10cezanne/psp_verstage: update SRAM addressKangheui Won
Loading address and size for the user app has been changed with recent PSP release. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: If247cdf3413c6a10f4b3c92fb7e43dd1057865d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-10amd/cezanne: verify transfer buffer in bootblockKangheui Won
Verify if transfer buffer is valid before progressing further to catch invalid transfer buffer early. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I4c470b156944b50e581dcdee47b196f46b0993f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52965 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: differentiate bios entryKangheui Won
AMDFW tool stores bios dir entry to bios1_entry in picasso but bios3_entry in cezanne. Separate getting bios_dir_addr into a function and implement it on each platforms. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie18ed7979a04319c074b9b251130d419dc7f22dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/52964 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: move platform-specific code to chipset.cKangheui Won
Move all platform-specific code except direct svc calls to chipset.c. There will be differences between each platforms and we can't put everything into svc.c. TEST=build firmware for zork Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie7a71d1632800072a17c26591e13e09e0269cf75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52963 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cezanne/psp_verstage: clean up duplicated targetKangheui Won
psp_verstage.bin target is already defined at common/psp_verstage/Makefile.inc, thus removing it here. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ica4b09282d1c4cfc555c18ba50951458b8580826 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52962 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 04:43:09 +0000