summaryrefslogtreecommitdiff
path: root/src/soc/mediatek/common
AgeCommit message (Collapse)Author
2022-06-03soc/mediatek: Rename mtk_wdt_preinit() to mtk_wdt_set_req()Rex-BC Chen
To simplify the calling sequence for mtk_wdt_preinit() and we always adjust request setting in mtk_wdt_preinit(), we rename mtk_wdt_preinit() to mtk_wdt_set_req() and call it in mtk_wdt_init(). From this modification, we can also enable thermal hardware reset feature (CB:64676, CB:64675) in MT8192 and MT8195. BUG=none TEST=build pass Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I1904ff9387f7677a077068f2c3df923bd642ea3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-05-28soc/mediatek/mt8186: Enable thermal hardware resetRunyang Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8186 Function Specification. BUG=none TEST=emerge-corsola coreboot TEST=thermal hardware reset is working. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: Id2ed55e6d4f4eec450bf7c849f726a389eeb6694 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64659 Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-20CBMEM: Change declarations for initialization hooksKyösti Mälkki
There are efforts to have bootflows that do not follow a traditional bootblock-romstage-postcar-ramstage model. As part of that CBMEM initialisation hooks will need to move from romstage to bootblock. The interface towards platforms and drivers will change to use one of CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called in the first stage with CBMEM available. Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-05-20soc/mediatek: Fill coreboot table with PCIe infoJianjun Wang
In order to pass PCIe base address to payloads, implement pcie_fill_lb() to fill coreboot table with PCIe info. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib2988694f60aac9cbfc09ef9a26d47e01c004406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-05-09soc/mediatek: Demote log level of SPMI clock calibration problem to infoRex-BC Chen
It's expected that the mismatch logs will be shown when doing calibration for spmi clock. If it is failed to do calibration for spmi clock for all data, the system will enter "die". Therefore, we adjust the log level from BIOS_ERR to BIOS_INFO. BUG=b:231531254 TEST=emerge-cherry coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I148b4aeaaeb10e1c269a8eccbb19e8d8e17e40ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/64090 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-31soc/mediatek/early_init: Fix function return typeJianjun Wang
Fix return type of early_init_get_elapsed_time_us() to comply with the data type of return value. Also replace memset() with struct initializer. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Fixes: commit 41faa22 (soc/mediatek: Add early_init for passing data across stages) Change-Id: I7c361828362c2dfec91358ad8a420f5360243da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-29soc/mediatek: Ensure PERST# deassertion time follows the specJianjun Wang
According to the PCIe CEM specification, the deassertion of PERST# should occur at least 100ms after the assertion. To ensure the 100ms delay requirement is met, calculate the elapsed time since assertion. If it is smaller than 100ms, do an extra delay. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the measured PERST# time: [DEBUG] mtk_pcie_domain_enable: 432517 us elapsed since assert PERST# [INFO ] mtk_pcie_domain_enable: PCIe link up success (17 tries) And the SSD information in boot log is as follows: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ie2b7b6174abdf951af5796ab5ed141c45f32fc71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek: Add early_init for passing data across stagesJianjun Wang
Add support for "early_init_data" region, which can be used to store data initialized in an early stage (such as bootblock), and retrieve it in later stages (such as ramstage). TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I01f91b7fe2cbe4f73b5c616bb7aae778dee27d9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek: Add a configurate "USE_CBMEM_DRAM_INFO"Rex-BC Chen
The memory initialization reference code didn't support returning DRAM information in the old platforms, for example MT8192 and MT8195. So we have to add a new configuration USE_CBMEM_DRAM_INFO to make sure the common code will try to get DRAM information on new platforms supporting that. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iebe9ea0c1d01890b09fdf586813d85adde9702e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-27soc/mediatek: Include 'console/console.h' when appropriateElyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) Change-Id: I93f930de5a2a477ec4c0d8e5c8c57b25f5e4252c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
2022-03-27src/soc/mediatek: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: Ifc85ed8b5660eca11be50fddda0cf32aa1dd611c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-27src: Remove unused <bootmode.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <bootmode.h>' -- src/) <(git grep -l 'platform_is_resuming\|gfx_set_init_done\|gfx_get_init_done\|display_init_required\|get_ec_is_trusted\|get_lid_switch\|get_wipeout_mode_switch\|clear_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_write_protect_state\|init_bootmode_straps' -- src/) |grep "<" Change-Id: I2ebd472e0cfc641bd7e465b8d29272fd2f7520a1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-25soc/mediatek/i2c.c: Remove unused variablesArthur Heymans
Change-Id: Iaa643feb76530cc74acf4d714d8a7f96709be1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-23soc/mediatek: Save dram info to cbmemXi Chen
Store dram info in cbmem for ramstage or payloads to use. BUG=b:206014043 TEST=Build pass on Kingler Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I195187c0c757a43bb6d2c57c8f303249f2a7995a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-18soc/mediatek/mt8186: Disable unused spm_thermalRex-BC Chen
In MT8186, we need to disable spm_thermal to prevent it from influencing other wdt status. There are two hardware pathes which are used for asserting watchdog from thermal. We can disable status of path 1 because status of path 2 is used. 1. Thermal -> SPM -> WDT 2. Thermal -> WDT Spm_thermal (path 1) is a flexible option for software control, and the hardware designer suggests that we should disable it if we don't use it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0ffde6bad3000a64e3b5782edaa72c62da034302 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62890 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Trigger wdt SW reset when wdt status is not equal to 0Rex-BC Chen
Because we close external signal in kernel driver since MT8195, it's more reasonable to trigger sw reset with exteranl signal again whenever the wdt status is not equal to 0. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic6128df7eadaebcf7ff8d4c5492e3e0cfbab6e36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62797 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-16soc/mediatek: PCI: Remove global variableJianjun Wang
Remove global variable and use 'pcidev_path_on_root()' to get the base address of PCIe controller. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ia41c82a7aa5d6e9d936e242550851cef83afeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/mediatek: Add chip config for setting PCIe configJianjun Wang
Add chip config for setting PCIe config. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Icff83f2a9f76862065987a74cfcc7e511be80a20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15i2c: Add configurable I2C transfer timeoutJes Klinke
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US, which controls how long to wait for an I2C devices to produce/accept all the data bytes in a single transfer. (The device can delay transfer by stretching the clock of the ack bit.) The default value of this new setting is 500ms. Existing code had timeouts anywhere from tens of milliseconds to a full second beween various drivers. Drivers can still have their own shorter timeouts for setup/communication with the I2C host controller (as opposed to transactions with I2C devices on the bus.) In general, the timeout is not meant to be reached except in situations where there is already serious problem with the boot, and serves to make sure that some useful diagnostic output is produced on the console. Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f Signed-off-by: Jes B. Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-15soc/mediatek/common: Add halt() after triggering wdt resetRex-BC Chen
It's more reasonable to halt when we trigger watchdog reset because the whole system should be reset afterwards. BUG=b:222217317 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I726ba1599841f63b37062f9ce2e04840e4f250bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09soc/mediatek/mt8186: Add GPIO driving functionsGuodong Liu
Add GPIO driving functions to adjust pin driving. The value of drive strength is different for each SoC, so we define GPIO_DRV0 to GPIO_DRV7 which are corresponding to 2/4/6/8/10/12/14/16mA in MT8186. This implementation is according to chapter 5.1 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=build pass Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I6d987f28be98b515fa5c542222bda08bea1d5118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62471 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09commonlib/bsd: Remove cb_err_tJulius Werner
cb_err_t was meant to be used in place of `enum cb_err` in all situations, but the choice to use a typedef here seems to be controversial. We should not be arbitrarily using two different identifiers for the same thing across the codebase, so since there are no use cases for serializing enum cb_err at the moment (which would be the primary reason to typedef a fixed-width integer instead), remove cb_err_t again for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/mediatek: Add PCIe supportJianjun Wang
Add PCIe support for MediaTek platform. Reference: - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250) - linux/drivers/pci/controller/pcie-mediatek-gen3.c This code is based on MT8195 platform, but it should be common in each platform with the same PCIe IP in the future. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib9b6adaafa20aeee136372ec9564273f86776da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek: remove unused RTC_GPIO_USER_MASKRex-BC Chen
RTC_GPIO_USER_MASK is not used in any drivers, so we remove them. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0a15d5da142bb38feb595610d69566330e31fedd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23src/mediatek: Refactor dramc_param to share more structuresXi Chen
The ddr_base_info struct, which stores basic DDR information, should be platform independent. Currently the struct is defined in each SoC's dramc_parah.h. To prevent code duplication, move it as well as other related structs and enums to a common header. Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I99772427f9b0755dc2c778b5f4150b2f8147bcc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-12soc/mediatek: Fix printing SPM versionYu-Ping Wu
Currently the SPM version string is stored at the end of the blob, possibly without a trailing '\0'. Therefore, we should be careful not to print characters beyond the blob size. BUG=b:211944565 TEST=emerge-corsola coreboot TEST=SPM version looked good in AP console BRANCH=asurada,cherry Change-Id: Icfeb686539dc20cf5b78de77c27bdbb137b5d624 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-11soc/mediatek: Only update required bits when triggering WDT resetRex-BC Chen
To prevent to modify original value of wdt_mode, we use setbits32 to update required bits. BUG=b:218420108 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I743c1af3583c18ec8500fc1eb89f31cdbce5317c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61729 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-09soc/mediatek/mt8186: Fix issue of clearing watchdog statusRex-BC Chen
The implementation of clearing watchdog status is wrong in CB:58835. The value written to the 'wdt_mode' register should be 'wdt_mode | 0x22000000' instead of 'wdt_status | 0x22000000'. BUG=b:204229208 TEST=check watchdog status is cleared. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8c5dbaab2ac43d3867037bc4160aa5af2d79284f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-09soc/mediatek/mt8186: Support DRAM fast calibration using blobXi Chen
For most MediaTek SoCs (MT8183, MT8192, MT8195) we rely on an external program (e.g., the "DRAM blob") to do the full DRAM calibration first, then store and and apply the generated parameters to the reference "fast DRAM calibration" in the vendor/mediatek folder for normal system boot. Starting with MT8186 the implementation of fast calibration may need to be changed, and a "DRAM blob" only path is introduced for devices that have to do both full and fast calibration using the external blob. TEST=fast calibration pass on kingler/krabby BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: If25a7dd6aa6261ecff79a1b4df8b1f2e53d896dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/61133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-07treewide: Remove "ERROR: "/"WARN: " prefixes from log messagesJulius Werner
Now that the console system itself will clearly differentiate loglevels, it is no longer necessary to explicitly add "ERROR: " in front of every BIOS_ERR message to help it stand out more (and allow automated tooling to grep for it). Removing all these extra .rodata characters should save us a nice little amount of binary size. This patch was created by running find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';' and doing some cursory review/cleanup on the result. Then doing the same thing for BIOS_WARN with 's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi' Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-01-25soc/mediatek: Save dramc_param header to mrc_cacheXi Chen
Fast-k flow may need to re-init header because mrc_cache doesn't store header. Storing header together with dparam data is better for data consistancy. TEST=fast calibration pass on Corsola BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I22982923dce06c9e770aa4f20f3dcd2f33685d84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-24soc/mediatek: Extract dramc_param_header to a common headerXi Chen
To be shared with different SOCs, move the dramc_param_header struct as well DRAMC_PARAM_FLAG and DRAMC_PARAM_CONFIG enums to a common header file dramc_param_common.h. TEST=fast calibration pass BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I087971799803e47e34c30063b2b0bd0cfc5795ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/61132 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-13soc/mediatek: Fix include guard naming for emi.hYu-Ping Wu
Fix the name of the include guard for soc/mediatek/common/include/soc/emi.h. BUG=none TEST=emerge-corsola coreboot BRANCH=none Change-Id: Iddac3467959545b7db141545aaa2a135536f44f1 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Xi Chen <xixi.chen@mediatek.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2022-01-10src/soc/mediatek: Remove unused <timer.h>Elyes HAOUAS
Change-Id: Ic87e41a9b317cc7d0b36ece5ffd1d32068e6a33a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-05src/soc/mediatek: Remove unused <delay.h>Elyes HAOUAS
Change-Id: I414ad3824819f441f316567795999ed9539cba7b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-01src: Drop duplicated includesElyes HAOUAS
<types.h> already provides <commonlib/bsd/cb_err.h>, <limits.h>, <stdbool.h>, <stdint.h> and <stddef.h> headers. Change-Id: I700b3f0e864ecce3f8b3b66f3bf6c8f1040acee1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-01soc/mediatek/mt8186: Add support for regulator VRF12/VCN33Rex-BC Chen
To provide power to PS8640, the eDP bridge IC on krabby, add control of VRF12 and VCN33 to set voltage from MT6366. TEST=measure 1.2V from VRF12 and 3.3V from VCN33. BUG=b:210806060 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I55a9ca16e1e335e9355d0a1b30c278a9969db197 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-28soc/mediatek: Prevent passing NULL MIPI commandsYu-Ping Wu
Previously (before CB:56965 [1]) mtk_dsi_send_init_command() would ignore NULL initialization commands passed to it. However, in the current code mipi_panel_parse_init_commands() doesn't check that (see CB:57150 [2]), so we should check it on the caller side from mtk_dsi_init(). [1] b2a1480191 device: Move MIPI panel library from mainboard/google/kukui into common [2] 4757a7ea33 mipi: Make panel init callback work directly on DSI transaction types BUG=b:202871018, b:209930699 TEST=emerge-corsola coreboot BRANCH=none Change-Id: I8196e3b135da273325e2e121523abb7fb230a49c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2021-12-28soc/mediatek/mt8195: Move some definations of devapc to common folderRex-BC Chen
Move some definations of devapc for sharing between MT8195 and MT8186. BUG=b:202871018 TEST=emerge-cherry coreboot; emerge-corsola coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1769ede790f106a320ead9be7e2a596fe96930a Reviewed-on: https://review.coreboot.org/c/coreboot/+/60394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-26soc/medaitek/mt8195: adjust USB phy shift valueRex-BC Chen
There is a design issue of bit shift which will drop a bit for USB3 phy on MT8195. Therefore, we add this patch to set USB phy registers from value of efuse. BUG=b:211528577 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Tianping Fang <tianping.fang@mediatek.corp-partner.google.com> Tested-by: Tianping Fang <tianping.fang@mediatek.corp-partner.google.com> Change-Id: I43cb6c1c795dd181d6eba7f3bc52e4eb1a602081 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60312 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-14soc/mediatek/mt8186: add tracker dumpRex-BC Chen
Tracker is a debugging tool, and MT8186 only supports AP tracker. When bus timeout occurs, the system reboots and latches some values which could be used for debugging. This function will be triggered only when it encounters the bug hanging issue. BUG=b:202871018 TEST=range of registers are dumped as expected. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie023de2a6f7421a16b2516baa0bf0bf6fff589e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-14soc/mediatek: add support for tracker version oneRex-BC Chen
There are two versions for tracker system: Version 1 for MT8186, and version 2 for MT8192 and MT8195. Reference document: MT8169_bus_dbg_tracker_cfg_reg.xls from MediaTek internal. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idb146974da118b1cf5a349370bf7b2fa13f1aba8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59989 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-29soc/mediatek: Flush cache before triggering EC resetRex-BC Chen
There will be no log in cbmem if we trigger ec reset on bootblock stage. Therefore, call dcache_clean_all() before triggering ec reset to flush cache to store logs on cbmem. BUG=b:207743045 TEST=show logs on cbmem Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-29soc/medaitek: add prompt string to config MTK_DFDRex-BC Chen
Add prompt string to allow selecting MTK_DFD manually. TEST=Select and enable MTK_DFD then successfully built firmware images. BUG=b:207450135 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied711321efa592cf1bf7b318fe4d0aa155c15c70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/i2c: Return negative values on errorYu-Ping Wu
Following coreboot's convention, return negative error codes from platform_i2c_transfer(). BUG=none TEST=emerge-asurada coreboot BRANCH=none Change-Id: I955b9aae11e20d75fac414d15714330e364dad2f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-26mb/google/corsola: Add VPROC12/VSRAM_PROC12 to regulator interfaceRex-BC Chen
Add VPROC12/VSRAM_PROC12 to adjust power for raising little CPU frequency. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I59b4627220022a51a116716036a8ba0048039508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek: log watchdog statusRex-BC Chen
Reveal watchdog status value on bootblock stage. BUG=b:207646327 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2c5ad222a41085616565dd5c10b0e967bb64ec63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek: move i2c function to common folderRex-BC Chen
Move mtk_i2c_max_step_cnt, mtk_i2c_check_ac_timing, mtk_i2c_speed_init and mtk_i2c_calculate_speed to common folder to share with MT8186. TEST=test on tomato ok TEST=emerge-asurada coreboot BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a702741c763bf9261cea90d0d71c08b6e28c261 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8186: add early initialization for eMMCRex-BC Chen
Some eMMCs need 80+ms for CMD1 to complete. And the payload may need to access eMMC in the very early stage (for example, depthcharge needs it 20ms after started) so we have to start initialization in coreboot. TEST=boot kernel from eMMC ok BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I3bc06b1fc506b1d6f54f7f456117d22477a87e29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8186: Configure eMMC and SD CardWenbin Mei
The Corsola reference design has both eMMC and SD Card interfaces so we have to configure both in RAM stage. TEST=build pass BUG=b:202871018 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I2f26a8a11edd29a80a7195e3a324151d66ecb293 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15mb/google/corsola: Add VMCH and VMC for regulator interfaceRex-BC Chen
Add VMCH and VMC for providing power of SDCard. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I50fc87415086eb22ff35d157dba38cfd7594cc40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15mb/google/corsola: Implement regulator interfaceRex-BC Chen
Use regulator interface to use regulator more easily. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied43cba51036c62a120df2afffeb63b5d73f012b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek: move functions of mmu operation to common folderRex-BC Chen
Move mtk_soc_disable_l2c_sram and mtk_soc_after_dram to common folder which are the same between MT8192, MT8195 and MT8186. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8f49214b932a8d28ed2ca0d764dc745fa8ad330d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek/mt8186: Add support for PMIC MT6366James Lo
Add basic support for VCORE/VDRAM1/VDDQ of MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I22e30421560a32f4a9e15899e8150376b1414494 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-03soc/mediatek: Add an overridable function for WDT clear statusRex-BC Chen
mtk_wdt_clr_status is different for MT8186 and MT8195, so we move this function to soc folder. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia8697ffdca1e2d1443f2259713c4ab6fdf1b1a9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58834 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03soc/mediatek/mt8195: move timer enum variables to timer_v2.hRex-BC Chen
Some enum variables of timer v2 are the same between MT8195 and MT8186, so we move them to common timer_v2.h. TEST=emerge-cherry coreboot BUG=b:200134633 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I89891a19e622aa24783025e73c38c4ffa43aa166 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58829 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-13soc/mediatek/mt8195: add tracker dumpZhenguo Li
Tracker is a debugging tool, include AP/INFRA/PERI tracker. When bus timeout occurs, the system reboots and latches some values which could be used for debug. Signed-off-by: Zhenguo Li <ot_zhenguo.li@mediatek.corp-partner.google.com> Change-Id: If457f4a096cd63038bf6b40552aa3caaba33d5fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58243 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-05src/soc to src/superio: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-02soc/mediatek: Fix I2C failures by adjusting AC timing and bus speedDaolong Zhu
1. The original algorithm for I2C speed cannot always make the timing meet I2C specification so a new algorithm is introduced to calculate the timing parameters more correctly. 2. Some I2C buses should be initialized in a different speed while the original implementation was fixed at fast mode (400Khz). So the mtk_i2c_bus_init is now also taking an extra speed parameter. There is an equivalent change in kernel side: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/i2c/busses/i2c-mt65xx.c?h=v5.15-rc3&id=be5ce0e97cc7a5c0d2da45d617b7bc567c3d3fa1 BUG=b:189899864 TEST=Test on Tomato, boot pass and timing pass at 100/300/400/500/800/1000Khz. Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Change-Id: Id25b7bb3a76908a7943b940eb5bee799e80626a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58053 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-11mipi: Make panel init callback work directly on DSI transaction typesJulius Werner
Our MIPI panel initialization framework differentiates between DCS and GENERIC commands, but the exact interpretation of those terms is left to the platform drivers. In practice, the MIPI DSI transaction codes for these are standardized and platforms always need to do the same operation of combining the command length and transfer type into a correct DSI protocol code. This patch factors out the various platform-specific DSI protocol definitions into a single global one and moves the transaction type calculation into the common panel framework. The Qualcomm SC7180 implementation which previously only supported DCS commands is enhanced to (hopefully? untested for now...) also support GENERIC commands. While we're rewriting that whole section also fix some other issues about how exactly long and short commands need to be passed to that hardware which we identified in the meantime. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I09ade7857ca04e89d286cf538b1a5ebb1eeb8c04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-09-08soc/mediatek: preserve WDT reset reason for debuggingFengquan Chen
1. Disable external output reset signal in first WDT reset to preserve WDT original reset reason for WDT issue in kernel stage. 2. After preserved WDT reset reason, do fully reset again by sending external output reset signal. BUG=b:194025005 TEST=boot to kernel ok and function test pass Signed-off-by: Fengquan Chen <fengquan.chen@mediatek.corp-partner.google.com> Change-Id: I5887a8312f4daab3cbd0a30fea0195670a932e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-26device/mipi: Move to drivers/mipiJulius Werner
Sounds like we prefer to have this under drivers/ instead of device/. Also move all MIPI-related headers out from device/ into their own directory. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib3e66954b8f0cf85b28d8d186b09d7846707559d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-08-23include/bcd: move bcd code to commonlib/bsd/includeRicardo Quesada
Move bcd2bin() / bin2bcd() functions to commonlib/bsd/include/ Also, the license is changed from GPL to BSD. This is because it is needed from "utils" (see CL in the chain). For reference bin2bcd() & bcd2bin() are very simple functions. There are already BSD implementations, like these ones (just to name a few): https://chromium.googlesource.com/chromiumos/platform/mosys/+/refs/heads/main/include/lib/math.h#67 http://web.mit.edu/freebsd/head/sys/contrib/octeon-sdk/cvmx-cn3010-evb-hs5.c BUG=b:172210863 TEST=make (everything compiled Ok). Change-Id: If2eba82da35838799bcbcf38303de6bd53f7eb72 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56904 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-18device: Move MIPI panel library from mainboard/google/kukui into commonJulius Werner
All boards that are trying to use MIPI panels eventually run into the problem that they need to store physical parameters and a list of DCS initialization commands for each panel, and these commands can be very different (e.g. a large amount of very short commands, a few very large commands, etc.). Finding a data format to fit all these different cases efficiently into the same structures keeps being a challenge, and the Kukui mainboard already once put a lot of effort into designing a clean, flexible and efficient solution for this. This patch moves that framework into a common src/device/mipi/ library where it can be used by other boards as well. (Also, this will hopefully allow us to save some duplicated work when using the same panel on different boards at some point.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I877f2b0c7ab984412b288e2ed27f37cd93c70863 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-08-12soc/mediatek/mt8192: move DFD driver to common folderRex-BC Chen
Move DFD driver to common folder so MT8195 can also use it. BUG=b:192429713 TEST=emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7937cddf5f3a66f9269a94301d3134e6f4f9f22e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-12soc/mediatek: revise the dependency of DVFS config optionsRex-BC Chen
The MEDIATEK_DRAM_DVFS_LIMIT_FREQ_CNT only makes sense if DVFS is enabled (e.g., MEDIATEK_DRAM_DVFS) so we should change it to depend on that instead of selecting DVFS. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ib81e4e48e863616ed1e36cd5c0000f4e2cfb5456 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-09soc/mediatek/common: add mt6359p vcore supportJames Lo
Add mt6359p vcore set/get support. To adjust frequency of little core, we need to adjust voltage of vcore. Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: Ibf49390ba78870b834c6d0b64e3f0f30f3494f18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-02helpers: Add GENMASK macroYu-Ping Wu
The GENMASK is defined in multiple files (with various names such as MASKBIT), which sets certain consecutive bits to 1 and leaves the others to 0. To avoid duplicate macros, add GENMASK macro to helpers.h. GENMASK(high, low) sets bits from `high` to `low` (inclusive) to 1. For example, GENMASK(39, 21) gives us the 64-bit vector 0x000000ffffe00000. Remove duplicate macro definitions. Also utilize GENMASK for _BF_MASK in mmio.h. BUG=none TEST=make tests/commonlib/bsd/helpers-test TEST=emerge-cherry coreboot BRANCH=none Change-Id: If2e7c4827d8a7d27688534593b556a72f16f0c2b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-07soc/mediatek/mt8195: Add dramc_param.hRyan Chuang
The dramc_param.h defines the header version, structure and APIs for the DRAM calibration parameters stored on the flash, and should be platform independent. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Ib8a6ea1b6cf1538854890b653d5d9a934f7f687e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-23soc/mediatek/common: Add DPM_FOUR_CHANNEL optionRyan Chuang
Add DPM_FOUR_CHANNEL option for 4 channel configuration for DPM. Publicize reset_dpm() as dpm_reset() for external reference. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: If6e0d5c4d16a7ddd69c4a427488f8899870db327 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-10soc/mediatek/mt8195: add power and power control for eDPJitao Shi
1. Add API of TVD_PLL1 mt_pll_set_tvd_pll1_freq() for setting rate. 2. Add API of TVD_PLL1 edp_mux_set_sel() for mux sel. 3. Add eDP power domain control. BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I9e43e0ffeb7b8bcd1786a8d2f5acbf22d5ab501f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55346 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/mediatek: Extract spm_parse_firmware to commonRex-BC Chen
spm_parse_firmware can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I54d9672aa9ee9078ec9fe3fa4f2e9fe860a50636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55139 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01soc/mediatek: Move the SSPM driver to commonRex-BC Chen
The SSPM driver can be shared by MT8183, MT8192 and MT8195. TEST=emerge-{asurada, kukui} coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If9779853becb298eeeabb3dc6096bc474baae202 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55050 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/mediatek: Move the MT8192 MCUPM driver to commonRex-BC Chen
The MPUCM drivers can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I07a66bcf5a149582f34df1cfd08b5514fc5c2eb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-14soc/mediatek: Remove duplicate enum declarationRex-BC Chen
Remove dram_cbt_mode in dramc_soc.h. TEST=emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idc4a3887c9cc3f77cbdd7282e2977f6df858817d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
2021-05-10soc/mediatek/mt8195: Add RTC driverYuchen Huang
Both mt8192 and mt8195 use MT659P RTC. Move mt8192/rtc.c to common folder and rename to rtc_mt6359p.c. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I73ea90512228a659657f2019249e7142c673e68e Reviewed-on: https://review.coreboot.org/c/coreboot/+/53897 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add clk_buf driverYuchen Huang
Both mt8192 and mt8195 use mt6359p clk_buf. But mt8195 clk_buf uses legacy co-clock mode without srclken_rc. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: Ie9ee91449a7a14e77231493f807b321b2dbaa6a6 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: Add mtcmos init supportWeiyi Lu
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: If7cd1f596f1406fa21d6586510e9956bb9846a6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek: Move the power domain data under each SoCWeiyi Lu
In follow-up patches, we need to set multiple power domains to power on the display and audio on MT8195. Move the power domain data under each SoC and make power_on() API to support multiple settings. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I8c3d19f1e9a4e516d674d68989ad509f37e5b593 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek: Move the common part of SPI drivers to common/Rex-BC Chen
The SPI drivers can be shared by MT8183, MT8192 and MT8195. TEST=emerge-{oak, kukui, asurada, cherry} coreboot; verified on Cherry P0 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7bb7809a88fbda67eca67ecfde45b9cb5f09dffe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: add pmif/spmi/pmic driverRex-BC Chen
MT8195 also uses mt6359p so we can reuse most drivers. The only differences are IO configuaration, clock setting, and PMIC internal setting related to soc. Reference datasheet: MT6315 datasheet v1.4.2.pdf, RH-D-2019-0616. Reference datasheet: MT6359_PMIC_Data_Sheet_V1.5.docx, RH-D-2018-0205. Change-Id: I73f9c9bf92837f262c15758f16dacf52261dd3a3 Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-28soc/mediatek: Move the common part of PMIC drivers to common/Yidi Lin
The PMIC drivers can be shared by MT8192 and MT8195. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ie17e01d25405b1e5119d9c70c5f7afb915daf80b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-26soc/mediatek/mt8195: Add timer supportYidi Lin
TEST=emerge-{oak, kukui, asurada, cherry} coreboot; verified on Asurada and Cherry P0 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ic6a87e7d5983bf14ad123de82ed670a22a7be1aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/52541 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26soc/mediatek/mt8195: Initialize watchdogYidi Lin
MT8195 requires writing speical value to mode register to clear status register. This value is invalid on other platforms. We can do this safely in the common watchdog driver. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Iba5b41f426fc38719bb343a220e0724bff229c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-21soc/mediatek: Move mt8192 ufs driver to commonYidi Lin
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I28eb13edcded95a9a4c17bdf92da9f792883a613 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-21src/mediatek: Move mt8192 eint driver to commonYidi Lin
The eint driver can be shared by multiple platforms so we want to move it to common/. BRANCH=asurada TEST=emerge-asurada coreboot Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id8e0b631d5079e51213831ed17aa540e0afadd4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-16soc/mediatek: Remove misleading memory logsYu-Ping Wu
When MRC cache region type is not found (for example, in recovery mode with !HAS_RECOVERY_MRC_CACHE), mrc_cache_stash_data() will return 0. Therefore, the platform code is not able to tell from the return value if the MRC cache data is actually written to flash or not. Since the MRC driver is already pretty verbose, ignore the return value and remove the misleading memory logs. BUG=none TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: I6b411664ca91b9be2d4518a09e9734d26db02d6e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52361 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/mediatek: Include sdram_info in ddr_base_infoYu-Ping Wu
Sync dramc_param.h with private repo mtk-dramk (CL:*3751861). BUG=none TEST=emerge-asurada coreboot TEST=Hayato boots with fast calibration BRANCH=asurada Change-Id: I79541f66ce68a75147c22b83a456e6268ca1485e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-04-09soc/mediatek: add new driver 'msdc' for eMMCWenbin Mei
Add MTK host mmc driver support. MTK host controller supports eMMC5.1 spec. BUG=b:177389446 TEST=emerge-asurada coreboot BRANCH=asurada Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I54a7749ed167c00cd631a76af7c67c654c7bc725 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-08soc/mediatek: dsi: fine tune the delta time for EoTpJitao Shi
We seperate the EoTp packet extra data. So need to reduce the delta. BUG=b:173603645 BRANCH=kukui TEST=Display is normal on Kukui Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I0666068cfb04b78eb706278814163f050da32b9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-27soc/mediatek: Adjust hsa, hbp, hfp packets for MIPI_DSI_MODE_LINE_ENDJitao Shi
ANX7625 requires the line packets to end at the same time. Otherwise, the display will be shifted. BUG=b:173603645 BRANCH=kukui TEST=Display is normal on Jacuzzi Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I5949de1a9a1947fa188233787166a478b1de68b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-24soc/mediatek: Use MRC cache API for asuradaYu-Ping Wu
Use the MRC cache API for asurada, and sync dramc_param.h with dram blob (CL:*3674585). With this change, the checksum, originally stored in flash, is replaced with a hash in TPM. In addition, in recovery boot, full calibration will always ne performed, and the cached calibration data will be cleared from flash. This change increases ROMSTAGE size from 236K to 264K. Most of the increase is caused by TPM-related functions. Add new API mtk_dram_init() to emi.h, so that 'dramc_parameter' can be moved to soc folder. With this CL, there is no significant change in boot time. Normal AP reboot time (fast calibration) is consistently 0.98s as before, so this change should not affect the result of platform_BootPerf. BUG=b:170687062 TEST=emerge-asurada coreboot TEST=Hayato boots with both full and fast calibration BRANCH=none Cq-Depend: chrome-internal:3674585, chrome-internal:3704751 Change-Id: Ief942048ce530433a57e8205d3a68ad56235b427 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-16cbfs: Remove prog_locate() for stages and rmodulesJulius Werner
This patch removes the prog_locate() step for stages and rmodules. Instead, the stage and rmodule loading functions will now perform the locate step directly together with the actual loading. The long-term goal of this is to eliminate prog_locate() (and the rdev member in struct prog that it fills) completely in order to make CBFS verification code safer and its security guarantees easier to follow. prog_locate() is the main remaining use case where a raw rdev of CBFS file data "leaks" out of cbfs.c into other code, and that other code needs to manually make sure that the contents of the rdev get verified during loading. By eliminating this step and moving all code that directly deals with file data into cbfs.c, we can concentrate the code that needs to worry about file data hashing (and needs access to cbfs_private.h APIs) into one file, making it easier to keep track of and reason about. This patch is the first step of this move, later patches will do the same for SELFs and other program types. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia600e55f77c2549a00e2606f09befc1f92594a3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-08soc/mediatek/common: Move DRAM implementation from mt8192 to commonXi Chen
To reduce duplicated dram sources on seperate SOCs, add dpm, dram_init, dramc_params, memory(fast-k or full-k) implementations, also add dramc log level macro header files. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I557c96b3d09828472b8b6f932b0192a90894043e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-01-28soc/mediatek/mt8192: Add function to raise the CCI frequencyWeiyi Lu
Implement mt_pll_raise_cci_freq() in MT8192 to raise the CCI frequency. Usage: mt_pll_raise_cci_freq(1400UL * MHz); Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I084cd7888b1dcfdeaef308b8bb3677d034497a30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-07soc/mediatek: rtc: Use `bool` as return typeYidi Lin
BUG=b:176307061 TEST=emerge-asurada coreboot; emerge-kukui coreboot emerge-oak coreboot boot to shell on Asurada Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id31fa04edc2920c1767d9f08ab7af0ab4a15bc24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-01soc/mediatek: dsi: Fix EoTp flagShaoming Chen
SoC will transmit the EoTp (End of Transmission packet) when MIPI_DSI_MODE_EOT_PACKET flag is set. Enabling EoTp will make the line time larger, so the hfp and hbp should be reduced to keep line time. BUG=b:168728787 BRANCH=kukui TEST=Display is normal on Kukui Signed-off-by: Shaoming Chen <shaoming.chen@mediatek.corp-partner.google.com> Change-Id: Ifadd0def13cc264e9d39ab9c981fbdc996396bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/48868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/mediatek/mt8192: Move flash_controller.c to common/Yidi Lin
The flash controller driver can be shared among mt8173 and mt819x. TEST=boot to kernel on Asurada boot to kernel on Hana (w/o BL31) Change-Id: I4e5213563189336496122a0f2d8077b3e5245314 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-28soc/mediatek/mt8192: add rtc MT6359P driverYuchen Huang
Add rtc MT6359P driver for rtc init and rtc eosc calibration. Refactor mt8173 and mt8183 code by extracting common API. Move rtc_read and rtc_write to each SoC folder, because mt8173 and mt8183 access rtc via pmic wrapper, while mt8192 accesses it via pmif. Reference datasheet: Document No: RH-D-2018-0101. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: I57d6738fdec148c7458b2024a0a8225415ca2f3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-22soc/mediatek/mt8192: Do memory pll init before calibrationHuayang Duan
Memory PLL is used to provide the basic clock for dram controller and DDRPHY. PLL must be initialized as predefined way. First, enable PLL POWER and ISO, wait at least 30us, release ISO, then configure PLL frequency and enable PLL master switch. At last, enable control ability for SPM to switch between active and idle when system is switched between normal and low power mode. TEST=Confirm Memory PLL frequency is right by frequency meter Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: Ieb4e6cbf19da53d653872b166d3191c7b010dca6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 09:27:47 +0000