summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2021-09-30soc/intel/common/../cse: Perform D0I3 bit reset/set prior sending EOPSubrata Banik
Prior to coreboot sending EOP messages during post, it's important to ensure that CSE is not in Idle state. In case CSE is in Dev Idle state (which means D0I3 bit is set), reset this bit before sending EOP command. This patch ensures coreboot has provision to send CSE EOP messages even after the FSP Notify phase without any delays waiting for the device to respond or timeout. BUG=b:200644229 TEST=Able to send CSE EOP message even after FSP Notify phase. Attempting CSE EOP msg sending post FSP notify without this code change causes `timeout` issue as below: BS: BS_PAYLOAD_LOAD exit times (exec / console): 171 / 0 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post HECI: timed out reading answer! HECI: Failed to receive! HECI: receive Failed HECI: EOP send/receive fail ERROR: Failed to send EOP to CSE, 2 cse: CSE status registers: HFSTS1: 0x90000255, HFSTS2: 0xf10516 HFSTS3: 0x20 VB2:vb2api_fail() Need recovery, reason: 0x31 / 0xc Saving nvdata board_reset() called! full_reset() called! Attempting CSE EOP msg sending post FSP notify with this code change is `successful` as below: BS: BS_PAYLOAD_LOAD exit times (exec / console): 170 / 0 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post CSE: EOP requested action: continue boot CSE EOP successful, continuing boot Change-Id: Iae1bc52e94b08f97004424ea0c147d6da8aca6e2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30soc/intel/common/../cse: Create APIs for CSE device state transitionSubrata Banik
This patch ensures APIs that are responsible for CSE device state transition between active to idle and vice-versa are available publically for other modules/boot stages to consume. BUG=b:200644229 TEST=Able to build and boot ADLRVP-P. Change-Id: Ia480877822d343f2b4c9bf87b246812186d49ea3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-29soc/intel/cannonlake: Guard acpi_fill_ssdt assignment with HAVE_ACPI_TABLESTim Wawrzynczak
Change-Id: I3677b4e545599d00a4ba16464836834febc2d1a5 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58024 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29soc/intel: Drop unnecessary `select REG_SCRIPT`Angel Pons
These platforms no longer use reg-script. Drop unneeded select. Change-Id: I8fc4dc29d25dffbf9ed1947d0ff013b2fae0faaf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/common/block/smbus: Drop reg-script usageAngel Pons
Using reg-script just to read-modify-write some registers makes no sense. Replace reg-script usage with regular register operations. Change-Id: I87d1278360a231cbe5b5f825ad9a448e59e63ea2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/skylake: Drop reg-script usageAngel Pons
Using reg-script just to read-modify-write some registers makes no sense. Replace reg-script usage with regular register operations. Change-Id: Ib3c83131c30fd02c579b910cfad6843eb28ba8f1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/{cnl,jsl,tgl,ehl,adl}: rename PMC device init/enable callbacksMichael Niewöhner
The current names of the PMC init/enable callbacks are very confusing. Rename them. Change-Id: I69f54f3b4e1ea9a9b4fa5c8dd9c0d454d7cd1283 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-29soc/intel: Rename GNVS struct member to match ASLAngel Pons
Rename the `ecps` GNVS struct member to `epcs` to match the name in ASL. Change-Id: I1f6b97309eea75e7dbb4e5e664660df05ec0845e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29soc/intel/alderlake: Add GFx Device ID 0x46c3Selma Bensaid
This CL adds support for new ADL-M graphics Device ID 0x46c3. TEST=boot to OS Change-Id: Ib55fb501f96fe9bcc328202511bbfe84a3122285 Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/alderlake: Add ADLP 242 power configurationsTracy Wu
Add ADLP 242 sku power related settings, which follow the settings of ADLP 282 sku (both are 15w). BUG=b:201253904 TEST=Build and check fsp log to confirm the settings are set properly. Change-Id: I829dd690c22d167a507b1910106da06b275cec09 Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-29soc/intel/alderlake: Add support for power cycle and SLP signal durationTim Wawrzynczak
The UPDs for PM power cycle duration and SLP_* signal durations are all identical to Tiger Lake, so add similar support, but use enums instead of comments to represent the durations symbolically. BUG=b:184799383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4a531f042658894bcbc6a76eff453c06e90d66b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57891 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29{sb,soc}/intel: Drop unused globalnvs.asl methodsAngel Pons
These methods are never used in the code. Drop them. Change-Id: If5568b494f821d2647ada5ae845bcd015708520e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29{sb,soc}/intel: Drop PRMx from GNVSAngel Pons
These fields are never used in the code. Drop them. Change-Id: Icd07f2d704c19126bf6df4d740c21d5a1342061b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29{sb,soc}/intel: Drop LCKF from GNVSAngel Pons
This field is never used in the code. Drop it. Change-Id: I88207ec369ab83823ef2f3fc40f68a0980ce9663 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-28soc/intel/baytrail: Always handle MRC as ELF fileAngel Pons
The current MRC binaries for Bay Trail are always ELF files. Always adjust the position in CBFS using the ELF header regardless of file names. Without adjusting the position, the system hangs right after calling into MRC. TEST: MRC position in CBFS does not change for bostentech/gbyt4. Change-Id: I74e1246a5fac3f3649be9842ff13c2fc70f72a20 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57989 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/intel/baytrail: Drop invalid `VGA_BIOS_FILE` defaultAngel Pons
This file does not exist in the coreboot tree. One should place this file in the `site-local` subdirectory and specify the paths by means of `site-local/Kconfig`. Change-Id: I86ac2a6176947f12194bec6b63bedd7db79820a0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-25soc/intel/alderlake: Use intel_microcode_find() to locate ucode.binSubrata Banik
`intel_microcode_find()` function uses cached ucode data hence it would avoid locating ucode.bin from CBFS while passing ucode.bin pointer to FSP. Change-Id: I8f92c9f20dfb055c19c6996e601c8c24767aecb7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24soc/intel/alderlake: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for tcss_usb3_port* devices. Change-Id: I65d9c83a9d0aab5a42f5a7cc6df98a154e79d16a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24soc/intel/alderlake: add MaxDramSpeed configCasper Chang
This change add MaxDramSpeed for variants usage to config dram speed. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Iba0fae0ab4ff0121dc63af792458492eeb21ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23soc/amd,intel/common/include/gpio: improve documentation of overridesFelix Held
Explicitly point out that gpio_configure_pads_with_override will ignore GPIOs that are only in the override configuration, but not in the base configuration. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1bdfcac89b81fef773938133a2699897c6ee9415 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23soc/intel/xeon_sp/cpx: Use FSP repoArthur Heymans
Some headers in vendorcode are still needed but the UPD definitions can be taken from the FSP repo. Change-Id: I7bb96649ecba9d313cfce50af202aabcf610680f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-23soc/intel/xeon_sp/cpx: Rename FSP UPDs using CPPArthur Heymans
coreboot expects different names for FSP UPDs so use some CPP to make it happy. Change-Id: I4b2c2dd6ba40cb58bc2089eb9204fd4f70b037aa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-23soc/intel/xeon_sp: correct wrong gpio register base offsetsMichael Niewöhner
Reference: Intel doc# 633935-005 and 547817 rev1.5. Change-Id: I38c20288a9839f8c3cf895f7b49941387bdca5e2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Lance Zhao Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-09-23soc/intel/tgl: correct wrong gpio GPI enable register base offsetMichael Niewöhner
Reference: Intel doc# 631120-001. Change-Id: Iaf3a1b7bc38a1b30f8cc901bd6496e77f2d92cfd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-23soc/intel/icelake: correct wrong gpio SMI register base offsetsMichael Niewöhner
Reference: Intel doc# 341081-002. Change-Id: If6e0503cc042c26c4077b8b32bb447d4e3a9bb6a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-23soc/intel/{xeon-sp,icl,tgl,jsl,ehl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so NMI interrupts can be used. References: - XEON-SP: Intel doc# 633935-005 and 547817 rev1.5 - ICL-LP: Intel doc# 341081-002 - TGL-LP: Intel doc# 631120-001 - TGL-H: Intel doc# 636174-002 - JSL: Intel doc# 634545-001 - EHL: Intel doc# 636722-002 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I2621f4495dfd4f95f9774d9081e44c604de830a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao
2021-09-23soc/intel/icl: add missing gpio group to fix the group indexesMichael Niewöhner
There is another gpio group, namely HVCMOS, between GPP_C and GPP_E. Add it, so the group index calculation for GPI/SMI/NMI results in the correct value. Reference: Linux linux/drivers/pinctrl/intel/pinctrl-icelake.c Change-Id: I7725191173ddc0d43bbe940cdf3b0dc2aa3e5f8d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/dedede: Migrate dedede to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all dedede variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for cret: util/spd_tools/bin/part_id_gen \ JSL \ lp4x \ src/mainboard/google/dedede/variants/cret/memory \ src/mainboard/google/dedede/variants/cret/memory/mem_parts_used.txt For cappy, the Makefile.inc was manually modified to use the new placeholder value. BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/dedede -a -x --timeless Change-Id: I2871ff45d6202520d4466b68a4d5bb283faf2b63 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/volteer: Migrate volteer to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all volteer variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for voema: util/spd_tools/bin/part_id_gen \ TGL \ lp4x \ src/mainboard/google/volteer/variants/voema/memory \ src/mainboard/google/volteer/variants/voema/memory/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/volteer -a -x --timeless Change-Id: Ibd4f42fd421bfa58354b532fe7a67ee59dac5e1d Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/brya: Migrate brya to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all brya variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for anahera: util/spd_tools/bin/part_id_gen \ ADL \ lp4x \ src/mainboard/google/brya/variants/anahera/memory \ src/mainboard/google/brya/variants/anahera/memory/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/brya -a -x --timeless Change-Id: I08efe1d75438c81161d9b496af2fa30ce6f59ade Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-22soc/intel/alderlake: Drop unused HECI_DISABLE_USING_SMM KconfigSubrata Banik
Earlier generation platform used `HeciEnabled` chip config (set to 0) and HECI_DISABLE_USING_SMM Kconfig to make the CSE function disable at the end of the post. `HeciEnabled` chip config remains enabled in all latest generation platforms hence drop HECI_DISABLE_USING_SMM Kconfig selection from SoC Kconfig as CSE remains default enabled. BUG=b:200644229 TEST=No functional impact during boot as CSE (B:0, D:0x16, F:0) device is listed with `lspci`. Change-Id: I5278e5c2e015b91bb3df3a3c73a6c659a56794b5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-09-20soc/intel/elkhartlake: Clear RTC_BATTERY_DEADTim Wawrzynczak
Normally for vboot-enabled x86 board, the VBNV region is stored in CMOS and backed up to flash (RW_NVRAM). However, on the very first boot after a flash of the full SPI image (so RW_NVRAM is empty), if RTC_BATTERY_DEAD is set, coreboot persistently requests recovery before FSP-M finishes (which appears to be the current location that RTC_BATTERY_DEAD is cleared on this platform). This is because vbnv_cmos_failed() will still return 1. Therefore, immediately after reading RTC_BATTERY_DEAD, it is cleared. This prevents an infinite boot loop when trying to set the recovery mode bit. Note that this was the behavior for previous generations of Intel PMC programming as well (see southbridge/intel, soc/skylake, soc/broadwell, etc). BUG=b:181678769 Change-Id: I95753fa536fae8ca4bb95007419875815c1bcb06 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-20soc/intel/icelake: Clear RTC_BATTERY_DEADTim Wawrzynczak
Normally for vboot-enabled x86 board, the VBNV region is stored in CMOS and backed up to flash (RW_NVRAM). However, on the very first boot after a flash of the full SPI image (so RW_NVRAM is empty), if RTC_BATTERY_DEAD is set, coreboot persistently requests recovery before FSP-M finishes (which appears to be the current location that RTC_BATTERY_DEAD is cleared on this platform). This is because vbnv_cmos_failed() will still return 1. Therefore, immediately after reading RTC_BATTERY_DEAD, it is cleared. This prevents an infinite boot loop when trying to set the recovery mode bit. Note that this was the behavior for previous generations of Intel PMC programming as well (see southbridge/intel, soc/skylake, soc/broadwell, etc). BUG=b:181678769 Change-Id: I1a55df754c711b2afb8939b442019831c25cce29 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-20soc/intel/jasperlake: Clear RTC_BATTERY_DEADTim Wawrzynczak
Normally for vboot-enabled x86 board, the VBNV region is stored in CMOS and backed up to flash (RW_NVRAM). However, on the very first boot after a flash of the full SPI image (so RW_NVRAM is empty), if RTC_BATTERY_DEAD is set, coreboot persistently requests recovery before FSP-M finishes (which appears to be the current location that RTC_BATTERY_DEAD is cleared on this platform). This is because vbnv_cmos_failed() will still return 1. Therefore, immediately after reading RTC_BATTERY_DEAD, it is cleared. This prevents an infinite boot loop when trying to set the recovery mode bit. Note that this was the behavior for previous generations of Intel PMC programming as well (see southbridge/intel, soc/skylake, soc/broadwell, etc). BUG=b:181678769 Change-Id: Idfaa9a24f7b7fefa4f63ab8e3bc4ee6a0f1faedf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-20soc/intel/tigerlake: Clear RTC_BATTERY_DEADTim Wawrzynczak
Normally for vboot-enabled x86 board, the VBNV region is stored in CMOS and backed up to flash (RW_NVRAM). However, on the very first boot after a flash of the full SPI image (so RW_NVRAM is empty), if RTC_BATTERY_DEAD is set, coreboot persistently requests recovery before FSP-M finishes (which appears to be the current location that RTC_BATTERY_DEAD is cleared on this platform). This is because vbnv_cmos_failed() will still return 1. Therefore, immediately after reading RTC_BATTERY_DEAD, it is cleared. This prevents an infinite boot loop when trying to set the recovery mode bit. Note that this was the behavior for previous generations of Intel PMC programming as well (see southbridge/intel, soc/skylake, soc/broadwell, etc). BUG=b:181678769 Change-Id: Ie86822f22aa5899a7e446398370424ca5a4ca43d Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-20soc/intel/{common,tgl,adl}: guard TME Kconfig option by SoC supportMichael Niewöhner
Currently, Intel TME (Total Memory Encryption) can be enabled regardless of SoC support. Add a Kconfig to guard the option depending on actual support. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ia20152bb0fc56b0aec3019c592dd6d484829aefe Reviewed-on: https://review.coreboot.org/c/coreboot/+/57762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-17soc/intel/{ehl,jsl}: make use of Kconfig options for PRMRR sizeMichael Niewöhner
Migrate the last two platforms to using Kconfig through `get_valid_prmrr_size()` instead of hardcoded values in the devicetree. Change-Id: I93aa177f741ca8b2a2d50fae2515606b96784e83 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-16vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_mainHsuan Ting Chen
vboot_reference is introducing a new field (ctx) to store the current boot mode in crrev/c/2944250 (ctx->bootmode), which will be leveraged in both vboot flow and elog_add_boot_reason in coreboot. In current steps of deciding bootmode, a function vb2ex_ec_trusted is required. This function checks gpio EC_IN_RW pin and will return 'trusted' only if EC is not in RW. Therefore, we need to implement similar utilities in coreboot. We will deprecate vb2ex_ec_trusted and use the flag, VB2_CONTEXT_EC_TRUSTED, in vboot, vb2api_fw_phase1 and set that flag in coreboot, verstage_main. Also add a help function get_ec_is_trusted which needed to be implemented per mainboard. BUG=b:177196147, b:181931817 BRANCH=none TEST=Test on trogdor if manual recovery works Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: I479c8f80e45cc524ba87db4293d19b29bdfa2192 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57048 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16drivers/intel/fsp2_0: Refactor MultiPhaseSiInit API calling methodSubrata Banik
FspMultiPhaseSiInit API was introduced with FSP 2.2 specification onwards. EnableMultiPhaseSiliconInit is an arch UPD also introduced as part of FSP 2.2 specification to allow calling FspMultiPhaseSiInit API. However, some platforms adhere to the FSP specification but don't have arch UPD structure, for example : JSL, TGL and Xeon-SP. Out of these platforms, TGL supports calling of FspMultiPhaseSiInit API and considered EnableMultiPhaseSiliconInit as a platform-specific UPD rather than an arch UPD to allow calling into FspMultiPhaseSiInit API. It is important to ensure that the UPD setting and the callback for MultiPhaseInit are kept in sync, else it could result in broken behavior e.g. a hang is seen in FSP if EnableMultiPhaseSiliconInit UPD is set to 1 but the FspMultiPhaseSiInit API call is skipped. This patch provides an option for users to choose to bypass calling into MultiPhaseSiInit API and ensures the EnableMultiPhaseSiliconInit UPD is set to its default state as `disable` so that FSP-S don't consider MultiPhaseSiInit API is a mandatory entry point prior to calling other FSP API entry points. List of changes: 1. Add `FSPS_HAS_ARCH_UPD` Kconfig for SoC to select if `FSPS_ARCH_UPD` structure is part of `FSPS_UPD` structure. 2. Drop `soc_fsp_multi_phase_init_is_enable()` from JSL and Xeon-SP SoCs, a SoC override to callout that SoC doesn't support calling MultiPhase Si Init is no longer required. 3. Add `FSPS_USE_MULTI_PHASE_INIT` Kconfig for SoC to specify if SoC users want to enable `EnableMultiPhaseSiliconInit` arch UPD (using `fsp_fill_common_arch_params()`) and execute FspMultiPhaseSiInit() API. 4. Presently selects `FSPS_USE_MULTI_PHASE_INIT` from IA TCSS common code. 5. Add `fsp_is_multi_phase_init_enabled()` that check applicability of MultiPhase Si Init prior calling FspMultiPhaseSiInit() API to honor SoC users' decision. 6. Drop `arch_silicon_init_params()` from SoC as FSP driver (FSP 2.2) would check the applicability of MultiPhase Si Init prior calling FspMultiPhaseSiInit() API. Additionally, selects FSPS_HAS_ARCH_UPD for Alder Lake as Alder Lake FSPS_UPD structure has `FSPS_ARCH_UPD` structure and drops `arch_silicon_init_params()` from SoC `platform_fsp_silicon_init_params_cb()`. Skip EnableMultiPhaseSiliconInit hardcoding for Tiger Lake and uses the fsp_is_multi_phase_init_enabled() function to override EnableMultiPhaseSiliconInit UPD prior calling MultiPhaseSiInit FSP API. TEST=EnableMultiPhaseSiliconInit UPD is getting set or reset based on SoC user selects FSPS_USE_MULTI_PHASE_INIT Kconfig. Change-Id: I019fa8364605f5061d56e2d80b20e1a91857c423 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-16soc/intel/alderlake: Select SOC_INTEL_COMMON_BLOCK_TCSS at SoC levelSubrata Banik
This patch selects SOC_INTEL_COMMON_BLOCK_TCSS from Alder Lake SoC Kconfig and drops SOC_INTEL_COMMON_BLOCK_TCSS Kconfig selection from specific mainboard (brya) to ensure all Alder Lake mainboards can make use of common TCSS block. BUG=b:187385592 TEST=Type-C pendrive/Gen-2 SSD detected as Super speed. Change-Id: I85f6a967eb34ea760418131a9586bfdeb13c9b5d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-16soc/intel/common: Make read_pmc_lpm_requirements more clearTim Wawrzynczak
Commit 2eb100dd12 added PMC LPM requirements to the the PEP ACPI objects, but it was not made clear that one of the pointer arguments to the mentioned function is not supposed to be NULL and Coverity complained. Make the intention clear by instead asserting that `info` cannot be NULL. Fixes: Coverity CID 1462119 Change-Id: I9e8862a100d92f4a7ed1826d3970a5110b47f4c4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-16drivers/intel/fsp2_0: Pass orientation to fsp_report_framebuffer_infoTim Wawrzynczak
Instead of always passing LB_FB_ORIENTATION_NORMAL, allow the chipsets implementing the callback to pass in an orientation. BUG=b:194967458 BRANCH=dedede Change-Id: I4aacab9449930a75aca9d68bf30d019f86035405 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16soc/intel/common: Add panel_orientation field to common chip configTim Wawrzynczak
When the FSP driver fills out framebuffer information for the coreboot tables, it assumes the orientation is always normal. This patch provides a field for a mainboard to override the panel orientation from the default (LB_FB_ORIENTATION_NORMAL). Later patches will have the FSP driver use this value when filling out framebuffer information. BUG=b:194967458 BRANCH=dedede Change-Id: I559b3d6a076112a1c020ce5e296430d7ccba9ee4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-16soc/intel/alderlake: Add igd deviceWisley Chen
Add igd device name in soc_acpi_name(), and src/drivers/gfx/generic can generate device in GFX0 scope in ssdt. BUG=b:198188272 TEST=emerge-brya coreboot and check ssdt. Change-Id: Id0c50254a8a25b47368e932c99243f4f02250b82 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-15soc/broadwell/acpi.c: Fix unresolvable symbol '\DNVS'Matt DeVillier
Fixes: 27c51a0 ("Revert "soc/intel/broadwell/pch: Replace ACPI device NVS"") which reverted the removal of device NVS, but was not boot tested on any Broadwell Chromebooks. It was recently discovered that the DNVS object was not being loaded, due to a weak function setting the size as zero not being defined for the platform/soc. Add the missing overloaded function and required headers. Test: build/boot google/auron variants LULU ans SAMUS, verify touchpad functional and no ACPI errors in kernel boot log. Change-Id: Icd317d117dbb068bb6da80fe56c06c0267c7b2ae Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-09-15soc/intel/block/../tcss: Create enum for TCSS Port0/1/2/3Subrata Banik
Additionally, convert MAX_TYPE_C_PORTS from macro to enum value. Change-Id: I3c596d8a015adc0449b44710c6d517753904ecd6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-14src/soc/intel/jasperlake/spd: Update SPDsTyler Wang
Due to CL:55000 modified MT53E1G32D2NP-046 WT:B settings and CL:56597 add new memory in global_lp4x_mem_parts.json.txt, update SPDs using gen_spd.go for JSL: Modify: 1.MT53E1G32D2NP-046 WT:B(lp4x-spd-5.hex --> lp4x-spd-3.hex) Add: 1.H54G46CYRBX267,lp4x-spd-1.hex 2.H54G56CYRBX247,lp4x-spd-3.hex 3.K4U6E3S4AB-MGCL,lp4x-spd-1.hex 4.K4UBE3D4AB-MGCL,lp4x-spd-3.hex BUG=b:199032134 TEST=emerge-dedede coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I45b9275403fc4166fc56ae4c368c7a222141e150 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-13soc/intel/tgl: Enable USB4 resources based on common KconfigFurquan Shaikh
Intel TGL BIOS specification (doc ##611569) Revision 0.7.6 Section 7.2.5.1.5 recommends reserving the following resources for each PCIe USB4 root port: - 42 buses - 194 MiB Non-prefetchable memory - 448 MiB Prefetchable memory This change enables reserving of resources for USB4 when mainboard selects the newly added Kconfig SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES. This is similar to the change for ADL in commit 8d11cdc6fa ("soc/intel/alderlake: Add Kconfig for recommended PCIe TBT resources"). Change-Id: I25ec3f74ebd5727fa4b13f5a3b11050f77ecb008 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-10soc/intel/alderlake: Align board type as per FSP v2347_00Ronak Kanabar
This patch adds new board type BOARD_TYPE_ULT_ULX_T4 and changes BOARD_TYPE_SERVER value to 8. BUG=b:199359579 BRANCH=None TEST=Build and boot brya Change-Id: I48eb0785a209499ee0d90bd541376d9bbacf2390 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-09-10soc/intel/common: Delete pep.aslTim Wawrzynczak
After switching to runtime generation of the Intel Power Engine (PEPD) device, this file is no longer required. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I2444433f08bfda6f79589a397a2ad2b5a3ecb0ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/56015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/skylake: Switch to runtime generation of Intel Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch skylake boards to this method. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7c7cb424278946a9767ea329d18fb03d4e57dce8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/common: Add Intel Power Engine support to discoverable PMCTim Wawrzynczak
In order to get rid of pep.asl, skylake also needs to support runtime generation of the Intel Power Engine, therefore add this support to devices that have a discoverable PMC as well. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4bf0c4a338301b335fa78617e0f2ed5a9f4360ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/56013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/elkhartlake: Switch to runtime generation of Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch elkhartlake boards to this method. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I47f03b440729d4b37ae0abc84bd1d18c4e01657d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/jasperlake: Switch to runtime generation of Intel Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch jasperlake boards to this method. soc/intel/jasperlake: Switch to acpigen PEPD Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib7f17f9b3b1396708ba68fa7a6d199d6e8b0ba11 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-10soc/intel/cannonlake: Switch to runtime generation of Intel Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch cannonlake boards to this method. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic5343b0fd37eafac29a23846c8cfc3ca93d1821d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-10soc/intel/cannonlake: Switch PMC to use device callbacksTim Wawrzynczak
Now that the PMC device is marked as hidden in devicetrees, the device callbacks can be used instead of BOOT_STATE_INIT_ENTRY callbacks. Note that this moves PMC initialization from BS_DEV_INIT_CHIPS to BS_DEV_ENUMERATE, which aligns with other Intel SoCs. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If292728ad975ba803fed6abea879f6f634470a11 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/tigerlake: Switch to runtime generation of Intel Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch tigerlake boards to this method. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I8e97c589273e934e89d69d8829680b9cac1ff9f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/tigerlake: Move LPM functions to new fileTim Wawrzynczak
The LPM enable mask is useful to have in more than one place, therefore more the get_disable_mask() function and its helpers to lpm.c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ibe83dc106f5f37baf9d5c64f68c47d85ea4e6dd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/alderlake: Switch to runtime generation of Intel Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch alderlake boards to this method. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I617bc3d1c3cf4ac6b6cbbd790dcf62e731024834 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/common/block/acpi: Add LPM requirements support to PEPD _DSMTim Wawrzynczak
This patch adds support for the S0ix UUID in the Intel Power Engine _DSM method. This allows the ACPI tables to expose device/IP power states requirements for different system low power states BUG=b:185437326 TEST=Along with following patch on brya0 after resume from s0ix, cat /sys/kernel/debug/pmc_core/substate_requirements Element | S0i2.0 | S0i3.0 | Status | USB2PLL_OFF_STS | Required | Required | Yes | PCIe/USB3.1_Gen2PLL_OFF_STS | Required | Required | Yes | PCIe_Gen3PLL_OFF_STS | Required | Required | Yes | OPIOPLL_OFF_STS | Required | Required | Yes | OCPLL_OFF_STS | Required | Required | Yes | MainPLL_OFF_STS | | Required | | MIPIPLL_OFF_STS | Required | Required | Yes | Fast_XTAL_Osc_OFF_STS | | Required | | AC_Ring_Osc_OFF_STS | Required | Required | Yes | SATAPLL_OFF_STS | Required | Required | Yes | XTAL_USB2PLL_OFF_STS | | Required | Yes | CSME_PG_STS | Required | Required | Yes | SATA_PG_STS | Required | Required | Yes | xHCI_PG_STS | Required | Required | Yes | UFSX2_PG_STS | Required | Required | Yes | OTG_PG_STS | Required | Required | Yes | SPA_PG_STS | Required | Required | Yes | SPB_PG_STS | Required | Required | Yes | SPC_PG_STS | Required | Required | Yes | THC0_PG_STS | Required | Required | Yes | THC1_PG_STS | Required | Required | Yes | GBETSN_PG_STS | Required | Required | Yes | GBE_PG_STS | Required | Required | Yes | LPSS_PG_STS | Required | Required | Yes | ADSP_D3_STS | | Required | Yes | xHCI0_D3_STS | Required | Required | Yes | xDCI1_D3_STS | Required | Required | Yes | IS_D3_STS | Required | Required | Yes | GBE_TSN_D3_STS | Required | Required | Yes | CPU_C10_REQ_STS_0 | Required | Required | Yes | CNVI_REQ_STS_6 | | Required | Yes | ISH_REQ_STS_7 | | Required | Yes | MPHY_Core_DL_REQ_STS_16 | Required | Required | Yes | Break-even_En_REQ_STS_17 | Required | Required | Yes | Auto-demo_En_REQ_STS_18 | Required | Required | Yes | Int_Timer_SS_Wake0_Pol_STS | Required | Required | | Int_Timer_SS_Wake1_Pol_STS | Required | Required | | Int_Timer_SS_Wake2_Pol_STS | Required | Required | | Int_Timer_SS_Wake3_Pol_STS | Required | Required | | Int_Timer_SS_Wake4_Pol_STS | Required | Required | | Int_Timer_SS_Wake5_Pol_STS | Required | Required | | Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I542290bd5490aa6580a5ae2b266da3d78bc17e6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56005 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-10soc/intel/common/block/acpi: Move pep.asl to acpigenTim Wawrzynczak
There is a use-case for generating the AML bytecode at runtime for the Intel Power Engine device, which comes in a followup patch. BUG=b:185437326 TEST=verified on google/brya and google/dratini by dumping SSDT and verifying the PEPD device matches what was previously in the DSDT: Scope (\_SB.PCI0) { Device (PEPD) { Name (_HID, "INT33A1") Name (_CID, EisaId ("PNP0D80") Method (_DSM, 4, Serialized) { ToBuffer (Arg0, Local0) If ((Local0 == ToUUID ("c4eb40a0-6cd2-11e2-bcfd-0800200c9a66"))) { ToInteger (Arg2, Local1) If ((Local1 == Zero)) { Return (Buffer (One) { 0x63 }) } If ((Local1 == One)) { Return (Package (0x01) { Package (0x03) { \NULL, Zero, Package (0x02) { Zero, Package (0x02) { 0xFF, Zero } } } }) } If ((Local1 == 0x02)){} If ((Local1 == 0x03)){} If ((Local1 == 0x04)){} If ((Local1 == 0x05)) { If (CondRefOf (\_SB.PCI0.LPCB.EC0.S0IX)) { \_SB.PCI0.LPCB.EC0.S0IX (One) } If (CondRefOf (\_SB.MS0X)) { \_SB.MS0X (One) } If (CondRefOf (\_SB.PCI0.EGPM)) { \_SB.PCI0.EGPM () } } If ((Local1 == 0x06)) { If (CondRefOf (\_SB.PCI0.LPCB.EC0.S0IX)) { \_SB.PCI0.LPCB.EC0.S0IX (Zero) } If (CondRefOf (\_SB.MS0X)) { \_SB.MS0X (Zero) } If (CondRefOf (\_SB.PCI0.RGPM)) { \_SB.PCI0.RGPM () } } Return (Buffer (One) { 0x00 }) } Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie83722e0ed5792e338fc5c39a57eef43b7464e3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/alderlake: Set LpmStateEnableMask UPDTim Wawrzynczak
Use the get_supported_lpm_states() function to set the respective FSP UPD. TEST=with patchtrain on brya0, /sys/kernel/debug/pmc_core/substate_requirements shows only the substates that are applicable to the design (S0i2.0, S0i3.0). Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I5bb8b3671e78c5f2706db2d3a21b25cf90a14275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-10soc/intel/alderlake: Add get_adl_cpu_type functionTim Wawrzynczak
This function searches the known MCH device IDs for Alder Lake and returns the appropriate enum value representing ADL-P, ADL-M, ADL-S, or unknown. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I26354b340e0c5f15ba246c1cb831d7feaf62d2ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/57151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-09soc/intel/alderlake: Change VBOOT_HASH_BLOCK_SIZE to 4 KiBMAULIK V VAGHELA
Default VBOOT_HASH_BLOCK_SIZE is 1 KiB and increasing it to 4 KiB helps in improving overall boot time since it reduces hashing and body loading time. Increasing it over 4 KiB doesn't result in significant improvement, thus keeping the value at 4 KiB as of now. Timing data: Note that before Data is with 1 KiB block size. |------------------------------------------------------| | Stage | Block Size | Before | After | |finished loading body| 4 KiB | 205,187 | 189,947 | |finished loading body| 8 KiB | 205,187 | 188,708 | |finished loading body| 16 KiB | 205,187 | 188,085 | |finished loading body| 32 KiB | 205,187 | 187,793 | |------------------------------------------------------| BUG=b:188577893 BRANCH=None TEST=Boot time for Brya improves by 20 - 25 msec Change-Id: I9222761c7d58e4a370d3a41c651b6c169599d792 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-09soc/intel/alderlake: Enable Irms UPD for ADLRonak Kanabar
This change sets Irms config in FSP if TdcTimeWindow and TdcCurrentLimit is set to non zero. It results VR TDC Input current to be treated as it is root mean square. This change also optimizes the check of TdcTimeWindow and TdcCurrentLimit for TdcEnable UPD. BRANCH=None TEST=Build and boot brya with debug FSP and verify Irms UPD value from logs Change-Id: Ice5c775ef9560503109957a1ed994af1d287aafc Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2021-09-09mb/ocp: Remove superfluous FSP header CPP inclusionArthur Heymans
This is already done in drivers/intel/fsp2_0/Makefile.inc. Change-Id: Idfd15d0a9d2cb15e613881f80bb25c18bd7454bb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-09intel/xeon_sp/cpx: Hook up public microcode releaseArthur Heymans
Change-Id: I7e575cb17e2004bd931f4fa1d05f17c4cdca29ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-09soc/intel/broadwell: Set FADT `duty_offset` to 0Angel Pons
From ACPI specification, version 6.2 Errata A: A `duty_width` value of 0 indicates that processor duty cycle is not supported and the processor continuously runs at its base frequency. Because Broadwell sets `duty_width` to 0, processor duty cycle is not supported, and the value of `duty_offset` is ignored. For consistency with Lynx Point, set `duty_offset` to 0. Change-Id: I68cb85ec32a6cceda0cea29d76df6c6219b78a40 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-09-08soc/intel/common: Avoid NULL pointer deferenceJohn Zhao
Coverity detects dereference pointers req and res that are NULL when calling the pmc_send_ipc_cmd function. This change prevents NULL pointers dereference. Found-by: Coverity CID 1458068, 1458070, 1458971, 1458073, 1458075, 1458076 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ib88fa5f44dd33ad1ad2e763d79438b5c5b78acb4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-08cpu/x86/tsc: Deduplicate Makefile logicAngel Pons
The code under `cpu/x86/tsc` is only compiled in when its `Makefile.inc` is included from platform (CPU/SoC) code and the `UDELAY_TSC` Kconfig option is enabled. Include `cpu/x86/tsc/Makefile.inc` once from `cpu/x86/Makefile.inc` and drop the now-redundant inclusions from platform code. Also, deduplicate the `UDELAY_TSC` guards. Change-Id: I41e96026f37f19de954fd5985b92a08cb97876c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57456 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08soc/{apl,glk}: Allow to select the primary graphics deviceMaxim Polyakov
Allow to select the primary graphics device between the IGD and the external PCIe GPU depending on the ONBOARD_VGA_IS_PRIMARY config. The option sets the priority only. This means that if a high priority is set for an external PCI device and it is not connected/not enabled, then the device with a lower priority will be used, in our case it is IGD. TEST = Set PRIMARY_PCI and boot Linux on the Kontron mAL10 [1] with the miniPCIe video adapter on the Silicon Motion SM750 controller. As a result, the display connected to an external GPU device shows the Tianocore logo + setup menu and the desktop. [1] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: Idcd117217cf412ee0722aff52db4b3c8ec2a226c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-09-06soc/intel/broadwell: Drop unused PCH PCI device macrosAngel Pons
Get rid of several unused PCH PCI device macros. These macros expand to a call to the `pcidev_path_on_root_debug()` function, which only exists to debug bad code. If needed, these macros should be reimplemented with the `pcidev_path_on_root()` function instead. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I366e064f3fe708b55fb381aee25b2795b1c61142 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-06soc/intel/adl: Move USB4 hotplug Kconfig to commonFurquan Shaikh
This change adds a new Kconfig `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES` that can be selected by mainboard to reserve hotplug resources for USB4 at the SoC level. `ADL_ENABLE_USB4_PCIE_RESOURCES` is dropped from soc/intel/alderlake and instead the newly added Kconfig is now used. This new Kconfig is added so that the same config can be used across different platforms. In following changes, this Kconfig is utilized by TGL as well. Change-Id: Id7c359a0e255c43c2732f6cbe287bc7da14a46e3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-05soc/intel/common/cse: Add argument for CSE fixed client addrRizwan Qureshi
There are multiple HECI clients in the CSE. heci_send_receive() is sending HECI messages to only the MKHI client. Add an argument to heci_send_receive() function to provide flexibility to the caller to select the client for which the message is intended. With the above change heci_send() and heci_receive() functions are no longer required to be exposed. In the follow-up patches there will be messages sent to one other client. BUG=None BRANCH=None TEST=Build and boot brya. HECI message send and receive to MKHI client is working. Also, MEI BUS message to disable bus is working. Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: Icde6d0155b62472b6a7caadc5fc8ea2e2ba6eb0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-05soc/intel/alderlake: Add tpch device information under dptfSumeet Pawnikar
Add tpch device information for thermal functionality under dptf for alderlake soc based platform. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Iad8e8bc0b7a104bbe582bc477936d0d00087f1d1 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-05soc/intel/common: Add PMC IPC commands for FIVRSumeet Pawnikar
Add PMC IPC commands information for FIVR control functionality. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Iccb43b7ba4f0765499bf1844efbbb526bd671a8f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-05soc/intel/jasperlake: Utilize vbt data size Kconfig optionSeunghwan Kim
Currently maximum VBT data size for Jasper Lake is 8KB, but Bugzzy would use VBT data over 8KB. This change makes use of Kconfig option to increase the maximum VBT data size to 9KB for Jasper Lake. BUG=b:194029827 BRANCH=dedede TEST=build and boot bugzzy and verify fw screen is loaded Change-Id: I0abe1ba5609b48a8a8b15f88bec28342ce26c78f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57201 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-05soc/intel/elkhartlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: Ib6fce70d6b0386906850884880dadbf45597452d Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-05soc/intel/cannonlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: I6ae22f9df4834508dfa304050fad44d45df45334 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-05soc/intel/jasperlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: I10f859f30b260d012f0bc8755f32413d8b2cf267 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-03soc/intel/alderlake: set power limits dynamically for thermalSumeet Pawnikar
Set power limit values dynamically based on CPU TDP and PCI ID of SKU. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Ic331a3debb076ef08a312a31edc1468974fd4902 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57035 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03soc/intel/common: get tdp of CPU for different SKUsSumeet Pawnikar
Get tdp value of CPU for different SKUs based on PKG POWER MSR. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I9fba0a64da2f1d79d633054dddd9fdf1d3d8e258 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-03skylake: Default to `BOARD_TYPE_DESKTOP` for PCH-HAngel Pons
Set the `UserBd` FSP-M UPD to `BOARD_TYPE_DESKTOP` by default on PCH-H. Remove now-redundant mainboard code to set the `UserBd` UPD. Change-Id: I349abe5d89f562c158ce9baadbca2b2f56695846 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57261 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03src/*: Specify type of `DIMM_MAX` onceAngel Pons
Specify the type of the `DIMM_MAX` Kconfig symbol once. Change-Id: I2e86baaa8bd50c7b82c399fde5dcea05da6b4307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-09-03src/*: Specify type of `DIMM_SPD_SIZE` onceAngel Pons
Specify the type of the `DIMM_SPD_SIZE` Kconfig symbol once. Change-Id: I619833dbce6d2dbe414ed9b37f43196b4b52730e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-02soc/intel/tigerlake: Set MAX_CPUS for TGL-H to 16Tim Crawford
TGL-H supports up to 8 cores (16 threads). Change-Id: I2ee1be37f564bf1b6249a6c223be093747c38ab5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-01soc/intel/alderlake: Fix processor hang while plug unplug of TBT deviceSugnan Prabhu S
Processor hang is observed while hot plug unplug of TBT device. BIOS should execute TBT PCIe RP RTD3 flow based on the value of TBT_DMA_CFG_VS_CAP_9[30]. It should skip TBT PCIe RP RTD3 flow, if BIT30 in TBT FW version is not set. BUG=b:194880254 Change-Id: Ie3577df519f64c6f7270dc5537278af76536774e Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56503 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-27broadwell: Drop weak `mainboard_fill_spd_data` definitionAngel Pons
Make `mainboard_fill_spd_data` mandatory and adapt mainboards to define this function accordingly. Change-Id: Ic18c4c574e8c963bbb41c980f43bdbacc57735af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55806 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-27soc/intel/broadwell: Move `mainboard_fill_spd_data`Angel Pons
Move the `mainboard_fill_spd_data` function out of romstage, in preparation to confine `pei_data` usage to as few files as possible. Change-Id: I6447da4d135d920f9145e817bfb7f9056e09df84 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55805 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-27soc/intel/denverton_ns: Ensure CPU device has a valid linkFurquan Shaikh
This change calls `add_more_links()` in `denverton_init_cpus()` if `dev->link_list` is NULL. This condition can occur if mainboard does not add any APIC device in the device tree. Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/YLMK2FBWWL6RKDNKBVZB3NJDYMEYHED7/ "A different lapic number in devicetree.cb needed for CPU with the same SKU and steping (Intel Atom C3538)." Change-Id: I6f453901b17f7eff22beed8dbf6995cdc9f9b776 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57152 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: King Sumo <kingsumos@gmail.com> Reviewed-by: Suresh Bellampalli <suresh.bellampalli@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-26soc/intel/tigerlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: Ice4c727f2b75893cd012345a556fd21d9807dfaa Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-26soc/intel/alderlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. TEST=boot to OS, read PCI 0:0.0 config register 0x80, value is 0x31 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0c3e16edeab6f85a79eb10e1477d95952b554a18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-26soc/intel/common/block: Add PAM locking functionTim Wawrzynczak
Some FSPs provide a UPD to allow the bootloader to set the PAM lock bit instead of the FSP, therefore add a function in the common code to do this. Source: ADL & TGL FSP integration guides Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I1d6642b496617b6e8ccda8a0aa6bfd88ea9dc3ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/57145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-25soc/intel/cannonlake: Fix PCH-H IRQ constraintsAngel Pons
Cannon Point PCH-H does not implement the eMMC, I2C4 and I2C5 devices. Guard the IRQ constraints for these devices to prevent FSP assertions. Tested on Prodrive Hermes, debug FSP builds no longer fail to boot. Change-Id: I58674d1c3c5fe4535c022020674d48d6a5315bf9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-25soc/intel/tigerlake: Hook up ucode for TGL-HTim Crawford
Hook up microcode from 3rdparty repo for: - 06-8d-01 (CPUID signature: 0x806d1) Verified microcode blob was found in CBFS on system76/gaze16 (TGL-H). CBFS: Found 'cpu_microcode_blob.bin' @0x11700 size 0x18400 in mcache @0x76c2d0ac microcode: sig=0x806d1 pf=0x2 revision=0x2c Change-Id: Icf0d8bc700a73697f06503e9d1bb40ce26741cdf Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57067 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-24soc/intel/broadwell: Move `pei_data` out of romstage.cAngel Pons
Prepare to confine all `pei_data` references in raminit.c and refcode.c so that mainboards don't need to know about its existence. Change-Id: I55793fa274f8100643855466b6cca486896fb2c4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55801 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-24soc/intel/broadwell: Do early ME init a bit earlierAngel Pons
Do early ME init before adding the "start of raminit" timestamp. Change-Id: If8b27a9d4eb3b801e3e05dc2f2b95bf748985707 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55800 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-24soc/intel/tigerlake: Add USB ACPI devices for PCH-HJeremy Soller
Change-Id: Ia1c1c3d172366ddcc8c194cb2e0b0c2fb2acf678 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-24soc/intel/tigerlake: Add SPI_DMI_DESTINATION_ID for PCH-HJeremy Soller
Change-Id: I9a316b91b31166831f23eaf9e271a7d67ac4ccff Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 07:14:29 +0000