| Age | Commit message (Collapse) | Author |
|---|
|
Currently most of the FSP debug messages (when enabled) are truncated due to insufficient size of cbmem buffer.
Increase premem cbmem console size to 0x16000 bytes and cbmem buffer size to 0x100000 bytes so that cbmem buffer can contain most of the debug logs when FSP debug messages are enabled.
TEST=Verify output of 'cbmem -c' when FSP debug messages are enabled but MRC debug message.
Change-Id: I0273fb14916f213b686270a9dec4c1b47612af4d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71289
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current size of the cbmem buffer (128KB) is insufficient to contain the
complete debug log causing the cbmem console buffer to wrap.
This patch increases cbmem buffer size to 256KB so that the complete
debug log can be stored in it.
TEST=Make sure that logs from all the boot stages can be seen using
'cbmem -c'.
Change-Id: I2099386dd87a010c3a5937bd896620270f587b1c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71288
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements a new API to make the UFS controller function
disabled. Additionally, perform a warm reset post disabling the UFS
controller to let PMC know about the state of the UFS controller
and disable the MPHY clock.
BUG=b:264838335
TEST=Able to build and boot Google/Marasov successfully.
From the AP log, I am able to confirm that UFS is function disabled
using PSF.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I940a634f70f8c97ef1234866d4c5a1ff224c6e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch makes it easy for OEMs to keep a unified AP firmware image
to boot different SKUs with UFS and non-UFS as boot media.
With a unified image while booting on non-UFS SKU is exhibiting S0ix
failure due to UFS remain enabled in the strap although FSP-S is
making the UFS controller function disabled.
The potential root cause of this behaviour is although the UFS
controller is function disabled but MPHY clock is still in active
state.
A possible solution to this problem is to issue a warm reboot (if
boot path is S5->S0 or G3->S0) after disabling the UFS and let PMC
read the function disable state of the UFS for disabling the MPHY
clock.
Mainboard users with such board design where OEM would like to use
an unified AP firmware to support both UFS and non-UFS sku booting
might need to choose this config to allow disabling UFS while booting
on the non-UFS SKU.
Note: selection of this config would introduce an additional warm
reset in cold-reset scenarios due to function disabling of the UFS
controller.
BUG=b:264838335
TEST=Able to build and boot Google/Marasov successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a811d8f4aad41dab6f8988329eaa1d590a4637a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
If a CSE update is going to happen and early graphics is supported by
the mainboard, an on-screen text message is displayed to inform the
end user.
CSE update can take a while and an impatient end user facing a black
screen for a while may reset the device unnecessarily.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=On screen text message during CSE update observed on skolas
Change-Id: I28c4fef9345d577be287b76a2a767b5c852ec742
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72098
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DEFAULT_SOFTWARE_CONNECTION_MANAGER
Needs to be selected for ChromeOS mainboards even for non-ChromeOS
builds, else Thunderbolt/USB4 doesn't work under Windows (and likely
Linux as well).
TEST=build/boot Windows on drobit/banshee, verify TB functional
Change-Id: Iee3f99840f0c6cc384d9fdef6dff55bcbfc0380f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72140
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8432d799c9bf23058b7b903bb07f6c2b4308eeba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72103
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a INFO print indicating that we did infact attempt to display the
MRC training message to the user.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Print seen in cbmem -c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I1a20fb221aa2fa0eeaf9b7f8cf3d8a8ab0b91133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/taeko.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I52f9c261f4eea34e6d2300c8de97ee018d886189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71987
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors the mainboard_romstage_entry() function to avoid
redundant chipset programming caused by global reset due to CSE FW
sync operation. Hence, keeping only the minimal and mandatory
operations required to perform CSE FW sync successfully.
This would help to optimize the boot flow by removing redundant
programming like SA, SMBUS twice in every CSE FW update path.
TEST=Able to build and boot Google/Marasov successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iba9767ef51d7fc7ecf9de14454105865433ba041
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71932
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If memory training is going to happen and early graphics is supported
by the mainboard, an on-screen text message is displayed to inform the
end user.
Memory training can take a while and an impatient end user facing a
black screen for a while may reset the device unnecessarily.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On screen text message during MRC training observed on skolas
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70300
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Verify that VGA text mode is functional in romstage
Change-Id: I727b28bbe180edc2574e09bf03f1534d6282bdb2
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70303
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic14305b0479a8c57531d9930946eded7ac518b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71625
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch that introduced the selection of software connection manager,
CB:64561 - 060df17f1d (soc/intel/alderlake/acpi: Add Kconfig options for
SCM and FCM) added a default to enable the software configuration
manager directly in the choice.
This leads to warnings when running make menuconfig:
src/soc/intel/alderlake/Kconfig:439:
warning: defaults for choice values not supported
src/soc/intel/meteorlake/Kconfig:337:
warning: defaults for choice values not supported
src/soc/intel/tigerlake/Kconfig:299:
warning: defaults for choice values not supported
I'm not sure why the Kconfig linter didn't catch this, but this
issue is currently breaking the build for me. This patch fixes
it so that instead of setting the default directly, a new Kconfig
value is selected that then sets the default correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I674046a93af8f7c2f3003900804deefa89dae295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71776
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Alder Lake and Tiger Lake had unnecessary lower-case 'i' in GPP_C0_IRQ
define name.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ida892b00e5a28544950cb9863d0ff2408a514576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71819
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
The patch adds Kconfigs to define scaling factor for Efficient and
Performance cores instead of using hard coded values in the soc code.
Also, the patches uses the Kconfigs directly to calculate the core's
nominal performance. So, we don't need to implement soc function
soc_get_scaling_factor() to get the scaling factor data for different
core types. Hence, soc_get_scaling_factor() function is removed.
TEST=Build the code for Gimble and Rex. Also, I have verified that
build system logs error when the Kconfigs are undefined.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I55e4d815116ef40c5f33be64ab495e942bf35ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71687
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes the call into TXT lib in order to disable the TXT
if SoC user haven't selected the `INTEL_TXT` config. Disabling TXT
would be helpful to access VGA framebuffer prior calling into FSP-M.
TEST=Able to perform disable_txt and unlock memory which helped to
access VGA framebuffer prior calling into FSP-M.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9dd7c5492a5f45eef0dd9e836cc2da1844c78919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71575
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Software Connection Manager doesn't work with Linux 5.13 or later,
resulting in TBT ports timing out. Not advertising this results
in Firmware Connection Manager being used and TBT works
correctly.
Add Kconfig options to chose between SCM (Software Connection
Manager) and FCM (Firmware Connection Manager). FCM is primary, as
it's more compatible save for ChromeOS devices as ChromeOS uses
SCM.
Linux patch:
torvalds/linux@c6da62a
c6da62a219d028de10f2e22e93a34c7ee2b88d03
Tested with StarBook Mk VI (i7-1260P).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac31d37c0873f41f7b14e1051fe214466d1ebdd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The patch addresses Intel heterogeneous cores as `Efficient` and
`Performance` cores instead of `small` and `big` cores. It is to ensure
coreboot code has uniform reference to the heterogeneous cores. So, the
patch renames all `small` and `big` core references to `efficient` (eff)
and `performance` (perf) cores respectively.
TEST=Build the code for Brya and Rex boards
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I98c9c0ed86b211d736a0a1738b47410faa13a39f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71639
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
BUG=none
TEST=Build and boot to google/taniks. Check dmesg and make sure that
there is no regression.
Also confirm that there is no change in ACPI _PRT and IO-APCI interrupt
assignment.
IO-APIC interrupts before and after this patch:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1055:00
23: IO-APIC 23-fasteoi idma64.5, ttyS0
37: IO-APIC 37-fasteoi idma64.0, i2c_designware.0
38: IO-APIC 38-fasteoi idma64.1, i2c_designware.1
40: IO-APIC 40-fasteoi idma64.2, i2c_designware.2
41: IO-APIC 41-fasteoi idma64.3, i2c_designware.3
42: IO-APIC 42-fasteoi idma64.4, i2c_designware.4
45: IO-APIC 45-fasteoi idma64.6, pxa2xx-spi.6
77: IO-APIC 77-edge cr50_i2c
100: IO-APIC 100-fasteoi ELAN0000:00
103: IO-APIC 103-fasteoi chromeos-ec
_PRT before and after this patch:
Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015
Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016
Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000018
Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000019
Package (0x04) ==> 0x0010FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0010FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0011FFFF, 0x00, 0x00, 0x0000001A
Package (0x04) ==> 0x0011FFFF, 0x01, 0x00, 0x0000001B
Package (0x04) ==> 0x0011FFFF, 0x02, 0x00, 0x0000001C
Package (0x04) ==> 0x0011FFFF, 0x03, 0x00, 0x0000001D
Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x0000001E
Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x0000001F
Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000016
Package (0x04) ==> 0x0013FFFF, 0x00, 0x00, 0x00000020
Package (0x04) ==> 0x0013FFFF, 0x01, 0x00, 0x00000021
Package (0x04) ==> 0x0013FFFF, 0x02, 0x00, 0x00000022
Package (0x04) ==> 0x0013FFFF, 0x03, 0x00, 0x00000023
Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x00000024
Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000011
Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x00000025
Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x00000026
Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x00000027
Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x00000028
Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000016
Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x00000029
Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x0000002A
Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x0000002B
Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001DFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001DFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001DFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001DFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x0000002C
Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x0000002D
Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000016
Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000017
Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000014
Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000015
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib4fc850228b7ddbf84e2feb2433adff5e4002033
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71236
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h and soc/gpio.h includes with the
common gpio.h which will include soc/gpio.h which will include
intelblocks/gpio.h
BUG=b:261778357
TEST=Able to build and boot Google/brya.
Change-Id: Ia90a8ea7b4ee125657c7277e3e14018cfe5423a9
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71266
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Change-Id: I5a3e3506415f424bf0fdd48fc449520a76622af5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71525
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3dfd7dd1de3bd27c35c195bd43c4a5b8c5a2dc53
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71522
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves API "smbios_cpu_get_max_speed_mhz()"
to common code from board specific. This API was made
generic in 'commit d34364bdea12 ("soc/intel/alderlake:
Utilize `CPU_BCLK_MHZ` over dedicated macro")'
BUG=NONE
TEST=Boot and verified that SMBIOS max speed value is
correct on brya and rex.
(brya) dmidecode -t : "Max Speed: 4400 MHz"
(rex) dmidecode -t : "Max Speed: 3400 MHz"
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I87040ab23319097287e191d7fc9579f16d716e62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70879
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With enabling FSP Notify Phase APIs, it has chance to issue a global
reset in FSP after CSE EOP (with selecting SOC_INTEL_CSE_SEND_EOP_EARLY
), which CSE already in idle mode and cause failure. For this reason we
should drop SOC_INTEL_CSE_SEND_EOP_EARLY in all ADL sku and select
SOC_INTEL_CSE_SEND_EOP_LATE instead.
BUG=b:261544011
BRANCH=firmware-brya-14505.B
TEST=tested and verified on Marasov, make sure this kind of global
reset can be executed successfully.
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Change-Id: I29736ca8efee64dd03feb48404241ee6295b7c72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch drops the SoC specific implementation as DPTF driver can
now fillin those platform specific data using SoC specific macros.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If65976f15374ba2410b537b1646ce466ba02969b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add system agent ID for RPL QDF#Q2MB/Q2PS
TEST=able to build coreboot successfully
Signed-off-by: Marx Wang <marx.wang@intel.com>
Change-Id: I169c8bc51cdf7fbfcdb1996d93afa4a352e2fddf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71121
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch avoids hardcoding to the `use_eisa_hids` variable instead
relying on the SoC config to choose if the SoC platform supports
EISA HID.
If any SoC platform has the support then the `use_eisa_hids` variable
would be set to `true` based on the selection of `DPTF_USE_EISA_HID`
config.
Note: Prior to Tiger Lake, all DPTF devices used 7-character EISA
IDs. If selected, the 7-character _HIDs will be emitted,
otherwise, it will use the "new" style, which are regular
8-character _HIDs.
Ideally, the platform prior to Tiger Lake would set `use_eisa_hids`
to `true` and platform posts that would set `use_eisa_hids` to
`false`.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I869bebc8e17c1e65979ca3431308d69771a34fa3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71110
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch moves DPTF ACPI Device IDs into the header file (soc/dptf.h)
so that upcoming patches in this patch train can achieve more
common code.
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ied32eb301b0702ad7cf12b662886c9060415eb72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71103
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch makes the SoC specific callback code more readable by adding
`soc_` prefix into the `get_dptf_platform_info()`.
In nutshell this patch renames `get_dptf_platform_info()` to
`soc_get_dptf_platform_info()`.
TEST=Able to build Google/Rex without any compilation issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27d6a146d5928e1742f82f85f51ad42656f46344
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch drops unused `dptf.asl` from the latest IA SoC platforms
as DPTF ACPI code generation is now relies on runtime aka SSDT
rather than having fixed dptf.asl files to include inside the
mainboard dsdt.asl.
TEST=Able to build Google/Kano without any compilation issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I30a53eace89bf5324d7c2f15c6c2d2218f90eaf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71087
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Change-Id: I126d49c27302e1ed2e00ff491d59cadda7101d12
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70924
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On nissa, sending EOP late improves boot time by about 57ms.
Before (SOC_INTEL_CSE_SEND_EOP_EARLY):
943:after sending EOP to ME 931,206 (58,431)
943:after sending EOP to ME 932,911 (58,427)
943:after sending EOP to ME 930,908 (58,429)
943:after sending EOP to ME 941,357 (61,748)
943:after sending EOP to ME 933,289 (62,050)
943:after sending EOP to ME 939,578 (62,453)
943:after sending EOP to ME 932,491 (62,050)
943:after sending EOP to ME 929,693 (62,655)
943:after sending EOP to ME 942,247 (62,654)
943:after sending EOP to ME 936,984 (61,751)
After (SOC_INTEL_CSE_SEND_EOP_LATE):
943:after sending EOP to ME 1,107,816 (3,498)
943:after sending EOP to ME 1,053,286 (25,212)
943:after sending EOP to ME 1,124,095 (3,511)
943:after sending EOP to ME 1,098,591 (3,498)
943:after sending EOP to ME 1,107,772 (3,499)
943:after sending EOP to ME 1,080,008 (45,969)
943:after sending EOP to ME 1,081,754 (8,024)
943:after sending EOP to ME 1,109,193 (4,102)
943:after sending EOP to ME 1,088,866 (4,201)
943:after sending EOP to ME 1,081,684 (4,203)
BUG=b:247902068
TEST=EOP time is improved on nissa (measurements above).
Change-Id: I2389831b4ab62f247193b5b0c5ec201e12eaa3db
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70849
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was done previously for ADL. moving the code to common so
it can be leveraged for other platforms (e.g. MTL)
TEST=Built and tested on anahera by verifying SSDT contents
Change-Id: I45eded3868a4987cb5eb0676c50378ac52ec3752
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Change-Id: I6f1d7625eb457084ba893b25518fdfdb59cf64db
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
As per PCI Express Base Specification 5.0 section 5.4.1.3 ASPM
Configuration
+-----------------------+-------------------------------+
| Field Description | ASPM Support |
+-----------------------+-------------------------------+
| 00b | No ASPM support |
+-----------------------+-------------------------------+
| 01b | L0s Supported |
+-----------------------+-------------------------------+
| 10b | L1 Supported |
+-----------------------+-------------------------------+
| 11b | L0s and L1 Supported |
+-----------------------+-------------------------------+
100b aka 0x4 is added by FSP to allow auto configuration (to avoid
conflicting with the PCI specification defined values).
Additionally, changed enum definition which is now meeting the FSP expectations better.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8c9055f721e144f2ff5055e5f99ea641efc4d268
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70719
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable L1 substates for PCIe compliance test mode in order to get
continuous clock output.
BUG=b:235863379
TEST=Boot in compliance mode, check FSP settings
Signed-off-by: Bora Guvendik <bora.guvendik@intel.corp-partner.google.com>
Change-Id: I2a3b313425e00fe11f616d964f825baaef463c71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70165
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch drops the redundant macro to define CPU BCLK and instead
uses `CPU_BCLK_MHZ` config to calculate the
`smbios_cpu_get_max_speed_mhz`.
TEST=Able to see max cpu speed is correct in smbios table while trying
on Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5167f3a513c074b9e6986c960e1bcced65f1264c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70676
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Change-Id: Ic40f1e935b244f39fa3c1322e5128465c57f5e26
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70579
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I3062e5b8a0524059b9695dfd32254c5c53598925
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70578
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
HEC1 and SRAM are defined in src/soc/intel/alderlake/chipset.cb:
device pci 16.0 alias heci1 on end
device pci 14.2 alias shared_sram off end
This patch adds entries for these devices in DSDT to prevent "AE_NOT_FOUND" errors from kernel
TEST=Built and tested on brya to confirm errors are not seen.
BUG=b:260258765
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ifd9c509e82ccf02a7801d51513597fe2e5d9e631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70454
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
"Argh! Lack of consistency! UNACCEPTABLE!" - Emotions
Swap the position of two lines so that defaults are listed in
alphabetical order according to the PCH type: M, N, P, S.
Change-Id: I82a23eb2b5036d3b7ec6766ae9891078f1caab69
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70522
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch moves TCSS firmware latency related macros from SoC
specific tcss.h to IA common tcss.h
Additionally, ensure other structure definitions belonging to the
IA common code tcss.h are not causing compilation issues for ASL files
(due to including FW latency macros) hence, guarded against
`!defined(__ACPI__)`.
TEST=Able to build and boot Google/Rex and Google/Kano.
Change-Id: Id51545ef714979c6ba09a2b468231b1f4bab0be7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70487
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves TCSS firmware latency related macros from
`tcss_pcierp.asl` to SoC specific `tcss.h`.
TEST=Able to build and boot Google/Kano.
Change-Id: I96db2dbf050c8f09e4d9c4018a2caa286f7ef1d1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70485
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/mmio.h>` chain-include `<arch/mmio.h>:
https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes
Also sort includes while on it.
Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This avoids the need to hardcode the IOAPIC ID.
Change-Id: I0965b511e71c58f1c31433bc54595a5fabb1c206
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70268
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
SOC_INTEL_CSE_SEND_EOP_EARLY breaks soft ME disable, which works using
a HECI message that needs to be sent before EOP. Make the option
configurable to allow soft ME disable on alderlake.
Change-Id: I7febf7c029e7eac94052cc3a8142949d6813c1bc
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The patch gets the cpu and pch's tracehub mode from the debug area
of the Descriptor Region and updates the respective UPDs.
TEST=Build, verify the tracehub mode values.
Update CPU' and PCH's Trace Hub modes:
img=coreboot.rom
printf '\x01' | dd of=$img bs=1 seek=3841 count=1 conv=notrunc
printf '\x01' | dd of=$img bs=1 seek=3842 count=1 conv=notrunc
Check coreboot logs:
[DEBUG] rt_debug: CPU TraceHub Mode: 1 PCH Tracehub Mode: 1
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I088b5d1f5569aacbf79834b44372702f8d3a189f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
The devices in the list that was introduced in commit c66ea985776
("soc/intel/alderlake: provide a list of D-states to enter
LPM") are all internal. This CL skips the external buses (which caused
the addition of packages to non-existant paths such as
"_SB.PCI0.RP1.MCHC", and warnings from the kernel)
BUG=b:231582182
TEST=Built and tested on anahera by verifying SSDT contents
Change-Id: I3785b2b2af85d96e2e1296b6cfdefcd72080b5fe
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70163
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch ensures dropping of the duplicate macro introduced with
'commit 9e4488ab06fd9c4 ("soc/intel/{adl,cmn}: Add/Remove LTR
disqualification for UFS")'
`PCH_PWRM_BASE_SIZE` macro represents the size of the PMC MMIO range
which can be used as is even in ufs.asl file.
BUG=b:252975357
TEST=Build and boot nirwen and see no issues in PLT runs.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic967c609e1330eca1b9e1143e7efd78db011f317
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70180
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The coreboot CPU index for a lapic is arbitrary: it depends on which
CPU obtains a spinlock first. Simply using an increasing index will
result in consistent ACPI tables across each boot.
Change-Id: Iaaaef213b32b33e3ec9f4874d576896c2335211c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69510
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Later soc/intel/common/smbus addresses TCO2_STS as a separate
16-bit register, while baytrail and braswell assumes 32-bit
wide TCO1_STS to extend as TCO2_STS.
In src/soc/intel/denverton_ns:
#define TCO2_STS_SECOND_TO 0x02
In soc/intel/baytrail,braswell:
#define SECOND_TO_STS (1 << 17)
Elsewehere
#define SECOND_TO_STS (1 << 1)
It's expected that we remove the first (1 << 17) case and only
access TCO2_STS as a separate 16-bit register. For now, use
unique names to avoid confusion.
Change-Id: I07cc46a9d600b2bf2f23588b26891268e9ce4de0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: I098104f32dd7c66d7bb79588ef315a242c3889ba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch drops the local implementation
`log_me_ro_write_protection_info` and adopts the API from IA common
code (cse_lite.c).
BUG=none
TEST=Able to compile the cse_lite.c file for google/kano without
any error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I087ffb8ac94f14a6bd7f2bf6bb907c4047dc9899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69969
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
A previous CL ("Add missing ACPI device path names",
commit d22500f0c61f8c8e10d8f4a24e3e2bf031163c07) caused some errors
from the Kernel on Brya devices (see Tim's comment on patchset 8):
> ACPI Error: AE_NOT_FOUND, While resolving a named reference
> package element - \_SB_.PCI0.FSPI
FSPI is defined in src/soc/intel/alderlake/chipset.cb:
device pci 1f.5 alias fast_spi on end
This CL adds the corresponding FSPI device to the DSDT to prevent
the error mentioned above.
TEST=Built and tested on brya by verifying the error is gone.
BUG=b:231582182
Change-Id: I11e89ad2a5d47f6b579f755b0a41399ee3cb856c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69920
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The dimm_info structure (defined in src/include/memory_info.h)
currently does not hold information about the DIMM's
node/controller ID.
This patch extends the dimm_info structure by adding a new field for
the node ID, called node_num. Also, adapt the dimm_info_fill()
function accordingly to populate the newly-added field.
Background: These changes are necessary for the Atlas mainboard, where
we are currently experiencing issues with the DIMMs device/bank
locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a
distinct NODE ID. By looking at the smbios table we see
Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order
to distinguish them.
This patch was tested by building and booting for the Alderlake-P
RVP board, which has the same DIMM slot configuration as the
Prodrive Atlas mainboard.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per Intel doc #627331 Section 3.6.1 "Intel CSME Production Machine
Determination", from ADL onwards there are three criteria which
determine whether a device is in production mode:
1. Fuses are programmed
2. SPI descriptor is locked
3. Manufacturing variables are locked
When logging whether the device is in manufacturing mode, 1 and 2 are
already checked. Add a check for 3 as well.
Also add logs for each individual criteria so it's easy to tell why the
overall Manufacturing Mode is set or not.
BUG=b:255462682
TEST=On a nivviks which has not gone through EOM:
Before:
[DEBUG] ME: Manufacturing Mode : YES
[DEBUG] ME: SPI Protection Mode Enabled : NO
After:
[DEBUG] ME: Manufacturing Mode : YES
[DEBUG] ME: SPI Protection Mode Enabled : NO
[DEBUG] ME: FPFs Committed : NO
[DEBUG] ME: Manufacturing Vars Locked : NO
On an anahera which has gone through EOM:
Before:
[DEBUG] ME: Manufacturing Mode : NO
[DEBUG] ME: SPI Protection Mode Enabled : YES
After:
[DEBUG] ME: Manufacturing Mode : NO
[DEBUG] ME: SPI Protection Mode Enabled : YES
[DEBUG] ME: FPFs Committed : YES
[DEBUG] ME: Manufacturing Vars Locked : YES
Change-Id: Iac605baa291ab5cc5f28464006f4828c12c748fe
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69324
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Alder Lake CSME HFSTS registers definitions as per Intel
doc #627331 revision 1.0.0, section 3.4.8.
Follow up CLs will use the bit definitions for performing
various checks.
TEST=build and boot nivviks platform
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I9aeee7a3b41ad59c03391207930a253ffff19ae5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69286
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces static index 0 for PMC read resources with PCI
configuration offset 0x10 (PWRMBASE).
TEST=Able to build and boot Google, Rex to OS.
Without this change:
[SPEW ] PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran
0 limit 0 flags f0000200 index 0
With this change:
[SPEW ] PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran
0 limit 0 flags f0000200 index 10
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iee2523876a8045e70effd5824afc327d1113038b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add In Band Error Correction Code to Alderlake SOC's.
It's currently needed and tested for the Prodrive Atlas mainboard.
After enabling it in the UPD, FSP-M takes care of enabling IBECC.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I9cc2ed6defa1223aa422b9b0d8145f8f8b3dd12e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68756
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also sort includes.
Change-Id: I7da9c672ee230dfaebd943247639b78d675957e4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add function needed to generate ACPI backlight control SSDT, along with
Kconfig values for accessing the registers.
Tested by adding gfx register on system76/lemp11. Backlight controls
work on Windows 10 and Linux 6.1.
Change-Id: I1cc33bf0121ff44aea68a7e3615c5e58e2ab6ce2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch helps to save 10.200ms of booting time without any issue
seen during MP Init. All cores are out from reset and alive.
Additionally, no performance degradation is observed while running
benchmarks.
Refer to Intel Technical White Paper number:751003 for more details.
BUG=b:211770003
TEST=Able to boot to ChromeOS with all cores are enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1886bc5e60c2f6bc1e2f9d3c8d9c11799d2b53c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
a) Add LTR disqualification in D3 to ensure PMC ignores LTR
from UFS IP as it is infinite.
b) Remove LTR disqualification in _PS0 to ensure PMC stops
ignoring LTR from UFS IP during D3 exit.
c) Add Kconfig (SOC_INTEL_UFS_LTR_DISQUALIFY) check to apply
this LTR WA.
BUG=b:252975357
TEST=build and boot nirwen and see no issues in PLT runs
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I88772b0b7dde1fca0130472a38628e72dfd6c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch introduces a config option for SoC code to choose
the applicable SoC workaround.
For now, we have introduced `SOC_INTEL_UFS_OCP_TIMER_DISABLE`
to apply UFS OCP timeout disable workaround.
At present ADL SoC only selects so, and in future MTL and others
should check with Intel prior selecting this kconfig.
It's the placeholder to add more workaround in required going forward.
BUG=none
TEST=Able to build and boot Google/Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia2364d2de9725256dfa2269f2feb3d892c52086a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68309
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add system agent ID for RPL QDF# Q271
TEST=Tested by ODM and "MCH: device id a71b (rev 01) is Unknown" msg is
gone
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Change-Id: I6fd51d9915aa59d012c73abc2477531643655e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Enable the VCCST ICCMax Control for the ADL-N display flicker issue.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I10709ee8653563b397e8408e8e24ef8e656b02e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68252
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
On nissa, the pre-x86 time is not part of the 1s firmware boot time
target. Including the pre-x86 timestamps causes confusion since the boot
time appears to be greater than 1s, so disable the Kconfig on nissa.
We're not doing any analysis or optimisation of the pre-x86 time on
nissa anyway, this work will start from MTL onwards. Also, the Kconfig
is already disabled on the brya firmware branch, so this will result in
the same behaviour as brya.
Before:
Total Time: 1,205,840
After:
Total Time: 995,300
BUG=b:239769532
TEST=Boot nivviks, check "1st timestamp" is the first timestamp.
Change-Id: I885071c9e0ff9c8fac9444b382567d38a19c3c15
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68553
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops `ufs.asl` from the local SoC directory.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I84e0b51e74e2d6a7120f1d990152bc27e37a501f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68302
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
|
|
This patch includes UFS ASL entry from common block ACPI code.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia77ea1c915d0dec991afa5b977af78487ae6a8b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68301
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
|
|
This patch creates helper header file (ufs.h) for UFS to keep
required registers details and ACPI device id for UFS.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If08c54eb706876a4255542a708aa5fcd8bf43c55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68299
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add UFS PID (`PID_UFSX2`) value 0x50.
BUG=none
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I229469475cd116bf911b6530c3c819d00c808aa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68298
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current SMBIOS for coreboot is missing processor info for Alder Lake and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements voltage function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS processor voltage value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I77712b72fa47bdcb56ffddeff15cff9f3b3bbe86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68023
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current SMBIOS for coreboot is missing processor info for Alder Lake
and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements max speed function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS max speed value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I09bcccc6f97238f7328224af8b852751114896fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67913
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct UART source clock value in comment from 120 MHz to 100 MHz.
BUG=b:249530903
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ifc17357051ae0b3bc663da467b4fc809a46024d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68286
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I7ddb4ea792b9a2153b7c77d2978d9e1c4544535d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
RaptorLake introduces the support of the Voltage Regulator Fast Vmode
feature. When enabled, it makes the SoC throttle when the current
exceeds the I_TRIP threshold. This threshold should be between
Iccmax.app and Iccmax and take into account the specification of the
Voltage Regulator of the system.
This change provides a mean to:
1. Enable the feature via the `vr_config->enable_fast_vmode'. If no
I_TRIP value is supplied FSPs picks an adapted I_TRIP value for
the current SoC assuming a Voltage Regulator error accuracy of
6.5%.
2. Set the I_TRIP threshold via the `vr_config->fast_vmode_i_trip'
field.
These new fields are considered independent from the other `vr_config'
fields so that the board configuration does not have to unnecessarily
supply other VR settings to enable Fast VMode.
Information about the Fast VMode Feature can be found in the following
Intel documents:
- 627270 ADL and RPL Processor Family Core and Uncore BIOS
Specification
- 724220 RaptorLake Platform Fast V-Mode
- 686872 RaptorLake Lake U P H Platform
BUG=b:243120082
BRANCH=firmware-brya-14505.B
TEST=Read I_TRIP from the Pcode and verify consistency with
a few `enable_fast_vmode' and `fast_vmode_i_trip' settings.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I313acf01c534d0d32620a9dedba7cf3b304ed2ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The delayed return of certain fetch instruction from memory to
the UFS causes the OCP fabric to timeout on the transaction
and become non-responsive.
As recommended by the SoC and IP teams,program the
OCP fabric register to avoid the timeout in the OCP fabric.
This patch adds the following changes
1. Program the OCP fabric registers in the PS0 routine.
2. Move the ssdt contents of UFS to dsdt asl code to avoid
duplication of UFS device creation
BUG=b:240222922
TEST=Build and boot Nirwen UFS board, observe no system hang
during Chrome PLT test.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I949a4538ea5c5c378a4e8ff7bb88546db1412df2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
For further info on SATA test mode, please refer to this doc:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/sata-mqst-setup-paper.pdf
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I6ef79fc5723348d5fd10b2ac0847191fa4f37f41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67410
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use just one function to get the chipset powerstate and add an argument
to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the
failure log accordingly.
TEST: compile tested and qemu emulation successfully run
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
There are two classes of SPI controllers on Intel chipsets:
* generic usable SPI controllers
* SPI controller hosting the BIOS flash (fast SPI controller)
While the first class can be used for generic peripheral attachment the
second class mostly controls the BIOS flash and a TPM device (if
enabled). The generic SPI driver is not fully applicable to the fast SPI
controller. In addition, the fast SPI controller reports the reserved
MMIO range used for the BIOS flash mapping so that the OS is aware of
this range.
This patch moves the fast SPI controller of all known SoCs to the
fast SPI driver in common code. In addition, the PCI device for the
fast SPI controller is removed from the function 'spi_soc_devfn_to_bus'
as this is a callback of the generic SPI driver.
Change-Id: Ia881c1d274acdcf7f042dd8284048a7dd018a84b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
FSP silicon 3347 changed the default value of the EnergyEfficientTurbo
Updateable Product Data (UPD), enabling the Energy Efficient Turbo
feature by default. This feature prevents the cores from entering
Turbo frequency under heavy load.
As a result of this FSP change, coreboot explicitly disables this
feature to stay consistent with commit `caa5f59279e Revert
"soc/intel/alderlake: Enable energy efficiency turbo mode"'.
BRANCH=firmware-brya-14505.B
BUG=b:246831841
TEST=verify that bit 19 of MSR 0x1fc is set. 'iotools rdmsr 0 0x1fc'
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7498f87eb4be666b34cfccd0449a2b67a92eb9db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds power state 1/2/3 threshold setting interfaces
and pass the settings to FSP.
BUG=b:229803757
BRANCH=None
TEST=Add psi1threshold and psi2threshold to overridetree.cb and
enable FSP log to ensure the settings are incorrect.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: I0330ede4394ebc2d3d32e4b78297c3cb328660d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: Ifd25416c55c4dba1709f74cdedc0c58e881d6266
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
D3Cold isn't supported in S3.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I072f47737ef38c44b6a676019e9a73868ff17e5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67413
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Missing power limit setting for Alder-Lake-N 7W soc.
Document reference: 645548 and 646929
BUG=b:245440443
BRANCH=None
TEST=Build FW and test on nivviks board and there is no error
message "unknown SA ID: 0x4617, skipped power limits configuration."
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Change-Id: Iefe17f5b574cc319fe9aad3850401a8aa8e31270
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch fixes a hidden issue present inside FSP-S while coreboot
decides to skip performing MP initialization by overriding FSP-S UPDs
as below:
1. CpuMpPpi ------> Passing `NULL` as coreboot assume FSP don't need
to use coreboot wrapper for performing any
operation over APs.
2. SkipMpInit -----> Set `1` to let FSP know that coreboot decided
to skip FSP running CPU feature programming.
Unfortunately, the assumption of coreboot is not aligned with FSP when
it comes to the behaviour of `CpuMpPpi` UPD. FSP assumes ownership of
the APs (Application Processors) upon passing `NULL` pointer to the
`CpuMpPpi` FSP-S UPD.
FSP-S creates its own infrastructure code after seeing the CpuMpPpi
UPD is set to `NULL`. FSP requires the CpuMpPei module, file name `UefiCpuPkg/CpuMpPei/CpuMpPei.c`, function name `InitializeCpuMpWorker`
to perform those additional initialization which is not relevant for
the coreboot upon selecting the SkipMpInit UPD to 1 (a.k.a avoid
running CPU feature programming on APs).
Additionally, FSP-S binary size has increased by ~30KB (irrespective of
being compressed) with the inclusion of the CpuMpPei module, which is
eventually not meaningful for coreboot.
Hence, this patch selects `MP_SERVICES_PPI_V2_NOOP` config
unconditionally to ensure pass a valid pointer to the `CpuMpPpi` UPD
and avoid APs getting hijacked by FSP while coreboot decides to set
SkipMpInit UPD.
Ideally, FSP should have avoided all AP related operations when
coreboot requested FSP to skip MP init by overriding required UPDs.
TEST=Able to drop CpuMpPei Module from FSP and boot to Chrome OS on
Google/Redrix, Kano, Taeko devices with SkipMpInit=1.
Without this patch:
Here is the CPU AP logs coming from the EDK2 (open-source)
[UefiCpuPkg/CpuMpPei/CpuMpPei.c] when coreboot sets `NULL` to the
CpuMpPpi UPD.
[SPEW ] Loading PEIM EDADEB9D-DDBA-48BD-9D22-C1C169C8C5C6
[SPEW ] Loading PEIM at 0x00076F9A000 EntryPoint=0x00076FA24E2
CpuMpPei.efi PROGRESS CODE: V03020002 I0
[SPEW ] Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE
[SPEW ] Notify: PPI Guid: F894643D-C449-42D1-8EA8-85BDD8C65BDE,
Peim notify entry point: 76FA0239
AP Loop Mode is 2
GetMicrocodePatchInfoFromHob: Microcode patch cache HOB is not found.
CPU[0000]: Microcode revision = 00000000, expected = 00000000
[SPEW ] Register PPI Notify: 8F9D4825-797D-48FC-8471-845025792EF6
Does not find any stored CPU BIST information from PPI!
APICID - 0x00000000, BIST - 0x00000000
[SPEW ] Install PPI: 9E9F374B-8F16-4230-9824-5846EE766A97
[SPEW ] Install PPI: 5CB9CB3D-31A4-480C-9498-29D269BACFBA
[SPEW ] Install PPI: EE16160A-E8BE-47A6-820A-C6900DB0250A
PROGRESS CODE: V03020003 I0
With this patch:
No instance of `CpuMpPei` has been found in the AP UART log with FSP
debug enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8ebe0bcfda513e79e791df7ab54b357aa23d295c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66706
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new
hwcrypto_allowed argument, to potentially let them try to call the
vb2ex_hwcrypto API for hash calculation. This change will open hardware
crypto acceleration up to all hash calculations in coreboot (most
notably CBFS verification). As part of this change, the
vb2_digest_buffer() function has been removed, so replace existing
instances in coreboot with the newer vb2_hash_calculate() API.
Due to the circular dependency of these changes with vboot, this patch
also needs to update the vboot submodule:
Updating from commit id 18cb85b5:
2load_kernel.c: Expose load kernel as vb2_api
to commit id b827ddb9:
tests: Ensure auxfw sync runs after EC sync
This brings in 15 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Pcie5_1 is added for DID 0xA72Dh and BDF 0/1/1.
References:
RaptorLake External Design Specification Volume 1 (640555)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Id7440bf202d5560ff92807877d48b94054cb1de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Rename pcie5 alias as pcie5_0 since raptorlake is adding a new pcie5 RC.
BRANCH=firmware-brya-14505.B
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iee669e68e3607b7ffec9f0800e9f0a916defd498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch brings INTEL_TME config check prior programming
TME Set Activation Core MSR on all cores.
TEST=Able to boot Google/Taeko to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8af7e305da1050f443929ab33be556e713e53e9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66976
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU
PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init.
Implementation based on public Slimbootloader's
"Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib".
TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded.
PCIe x16 Gen3 GPU card started working in the PCIE 5.0 slot.
[DEBUG] HECI: Sending Get IP firmware command
[DEBUG] HECI: Get IP firmware success. Response:
[DEBUG] Payload size = 0x6944
[DEBUG] Hash type used for signing payload = 0x3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as
per Alder Lake Processor EDS.
TEST= Able to build and boot Google/Redrix.
Dumping MSR 0x9FF on all logical processors shows zero value being
set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I130480d4fba413d47d0d0137932ec1fb041a88d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66753
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the static kconfig being used to fill in TME enable
FSP UPD. Instead use`is_tme_supported()` and `CONFIG(INTEL_TME)` to check
if the CPU has required TME support rather than hardcoding.
TEST=FSP debug log shows `TmeEnable` UPD is set appropriately for the
TME-supported CPU SKUs.
As per FSP-M debug log:
Without this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x1
With this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8aa2922baaf2a49e6e2762d31eaffa7bdcd43b0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66750
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `INTEL_TME` Kconfig option has a prompt, which means it is meant to
be user-configurable. However, it has been selected from Alder Lake and
Meteor Lake Kconfig, so `INTEL_TME` cannot be disabled on them. Replace
the `select INTEL_TME` statements with default values in order for this
option to be user-configurable on all platforms that support it.
Change-Id: Ib37c108fcc1004840b82be18fd23c340a68ca748
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66756
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch adds the support to enable/disable skipping MBP HOB
from the devicetree based on mainboard requirement.
Only ADL-N FSP has the required support to skip the MBP HOB and
enabling it is saving the Boot time.
BUG=b:241850107
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Iddeb2c652fac9513b14139d6f732d333bbb989d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
xhci.asl places the SS ports at 11-14, following HS ports 1-10. However,
for Nissa, the kernel detects 12 HS ports 1-12 and 4 SS ports at 13-16,
resulting in the PLD intended for SS ports 1 and 2 being associated with
HS ports 11 and 12.
Changing the asl for SS to 13-16 makes locations associate correctly and
peering work.
BUG=b:234544025
BRANCH=firmware-brya-14505.B
TEST=manually verified on Nissa and Brya devices
Change-Id: I57aef771a7ff086b71a9e90b81e1a3635f832b2f
Signed-off-by: Adam Mills <adamjmills@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66590
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls into a helper function to fill `2nd microcode loading
FSP UPD` if FSP is running CPU feature programming.
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8534305e4e973c975ad271b181a2ea767c840ae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66686
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
