Age | Commit message (Collapse) | Author |
|
Add new config FSP_TYPE_IOT to add the IoT FSP option so that
respective mainboard Kconfig can use IoT FSP if needed.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I01d891348c039269138e64290ae3d6ec75d3c687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
UFS storage devices require the bRefClkFreq attribute to be set to
operate correctly in high speed mode. The correct value is determined by
what the SoC / board supports. For the ADL UFS controller, it is
19.2 MHz.
a) Introduce a new ACPI property "ref-clk-freq".
b) Add support to configure this property using an SoC Kconfig.
Kernel patch:
https://web.archive.org/web/20220801060732/https://lore.kernel.org/all/
20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid/
BUG=b:238262674
TEST=Build,boot Nirwen and dump SSDT entries and check that the kernel
correctly parses ref-clk-freq as 19.2 MHz.
Scope (\_SB.PCI0)
{
Device (UFS)
{
Name (_ADR, 0x0000000000120007) // _ADR: Address
Name (_DDN, "UFS Controller") // _DDN: DOS Device Name
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
/* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"ref-clk-freq",
0x0124F800
}
}
})
}
}
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I80c338a8a61f161b0feb6c5a3ca00cf5e0cfb36c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
A DDR5 DIMM internally has two channels each of width 32 bit.
But the total physical channel width is 64 bit.
BUG=b:180458099
TEST=Boot DDR5 to kernel
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Ic5e9c58f255bdf86a68ce90a4f853bf4e7c7ccfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52730
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Copy the constraint from ADL-S to ADL-P.
Fixes the following warning in Linux on System76 oryp9, which has an
NVIDIA GPU on the bridge.
pcieport 0000:00:01.0: can't derive routing for PCI INT A
This, in turn, resolves an IRQ conflict with the PCH HDA device that
would cause a stack track on every boot.
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000bf549647>] azx_interrupt [snd_hda_codec]
Disabling IRQ #10
Change-Id: I550c80105ff861d051170ed748149aeb25a545db
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66285
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0.
The System Agent PCI IDs were not present in older 2.1 revision of
DOC #619501. Now that the mapping of these IDs to SKUs is known, fill
the missing TDPs and Power Limit settings based on DOC #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure
VccIn Aux Imon IccMax. They were not present in older 2.1 revision of
DOC #619501. Based on DOC #619501 rev 2.6.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Based on DOC #619501, #634885, #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib50db521e4d127a773f903b45d4bec5c5cc180d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
There are 3 more CPU PCIe RP UPDs that are the current code is not setting,
and some boards may want to set these, so this patch adds support to set
these UPDs. The default values for any existing boards using these UPDs
should not change with this patch.
The UPDs are:
- CpuPcieRpDetectTimeoutMs
- CpuPcieRpAspm
- CpuPcieRpSlotImplemented
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id48019f984e8e53ff3ce0c3c23e02dab65112c99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66197
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SLP_S0 residency register and enable LPIT support.
Change-Id: I45e1fc9df3e782cdaac810af3189c5797b1fe413
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The current "normal" EPB (six) setting resulted in the desired out of
box power and performance for several CPU generations.
However, a power and performance analysis on Alder Lake and Raptor
Lake CPUs demonstrates that this value results in undesirable higher
uncore power and that seven is a more appropriate value.
Note: the Linux kernel "4ecc933b x86: intel_epb: Allow model specific
normal EPB value" patch sets the EPB to 7 for Alder Lake.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I5784656903d4c58bedc5063ee3ef310a99711050
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66059
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL
must be set to be able to set the Energy/Performance Bias using MSR
IA32_ENERGY_PERF_BIAS.
Note that since this bit was not set until this patch, the
`set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in
`soc_core_init()` was systematically failing.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Hide these ACPI device so Windows does not warn about missing device
drivers.
Change-Id: Iba6cf7a17eefc9f4f247621f6625151f2fd5f3a7
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When override "max_dram_speed_mts", set the DdrSpeedControl to manual.
(0:Auto, 1:Manual)
BUG=b:229549930
BRANCH=none
TEST=build coreboot without error
Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com>
Change-Id: Iffbbee8082fb1a41e0ed1db3f4ea9ec4709c9ce7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65877
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation to add a third option, have "Client" platforms select a
dedicated Kconfig option instead of the common "_BASE" option. Rewrite
the help texts to clarify what "Client" and "Server" mean, because the
terms refer to the type of silicon and not to the market segment. Some
uniprocessor (single-socket) servers are actually client platforms and
there are some multi-socket workstations based on a server platform.
Change-Id: I646729d709f60ca2b5e74df18c2b4e52f9b10e6b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The validation process verifies that hardware components comply with
the standard hardware specifications. For instance, PCI express
implementation must comply with the hardware PCIe specification
requirements: Electrical, Configuration, Link Protocol and Transaction
Protocol. To perform these tests the hardware must be configured in a
particular state: some feature related to power management need to be
turned off, hot plug should be enabled...
This patch sets the appropriate FSP Updateable Product Data flags to
get the hardware in the proper configuration:
- Enable PCIe hotplug on all ports
- Set clock sources to run free
- Set the FSP compliance test mode flag
BUG=b:235863379
TEST=Compilation with and without the flag
Verify code path with instrumentation
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Ic07b9276121dfbd273a8f63a1f775ddbd3566884
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CPUIDs and Engineering Samples decoding based on DOC #618427.
Keep MICROCODE_BLOB_UNDISCLOSED for PCH-N SKUs as microcode
blobs are still missing.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibb1337e5cbf5b82fdaceb7eb4661d708a32ff0ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65564
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
BUG=b:235005582
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I9e254988bc3d20b9f9e42a605cc0ebd419ab49ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ib8d9a9e94d16ad291d9cc8576db845a634ae026e
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65614
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes the issue with INTC1056 invalid resource reported by
alderlake-pinctrl Linux driver on ADL-S platform. The driver also
includes GPIO Community 3 in the GPIO list compared to ADL-N which
was missing in GPIO ACPI device.
TEST=Boot Ubuntu 22.04 on MSI PRO Z690-A DDR4 WIFI and check there is
no invalid resource error reported by alderlake-pinctrl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23da68c247de86438cc2eef2b5a5a9aa711c1d7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If66c2799d4d74ff9f309665a0336b5f679796f9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some Alder Lake-N boards will use compressed ME RW blobs to obtain
savings on the SPI size (1916KB before compression, ~1132KB after
compression). So add an additional check before calling
cse_fw_sync() from romstage. When compressed blobs are used, the call to
CSE firmware update has to be in post-RAM stages.
BRANCH=firmware-brya-14505.B
Change-Id: I0d9ede52cb493974e4ba6e2e2cf11c9789b3b087
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63760
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch sets the Power Limits and Voltage Regulator settings for
three RaptorLake SKUs (45W, 28W and 15W) following the guidance from
document 686872 (June 7th edition).
BUG=b:237809660
TEST=Power Limit and VR serial logs review + debug instrumentation
SKUs successfully booted
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7e9d4039615e6c33b869c6243efbfeb2259ac219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65582
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
mch_id is set to zero and then unnecessarily tested.
TEST=build and boot image on ADL RVP board
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I4f48742b04edd50fbc0db342b563534e709d6fdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Platform with public FSP hooked-up have an additional parameter
to control CNVi WiFi with CnviWifiCore UPD.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I19efb645fbe1530a571c92d0573c1c60ff6605a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update 3rdparty/fsp submodule to include AlderLake FSP.
Hook up the Kconfig settings to point to Fsp.fd and headers for
ADL-S and ADL-P platforms which the FSP has been published for.
The FSP binaries are compliant with the specification revision 2.3
so update these settings accordingly.
Although FSP header is v2.3 compliant, the features set of the FSP
v2.3 is not being met.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I577931da7952b681534bb78b7b2c7683cd99febd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65519
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I86423c45ca33a79d3d8cf8e4ca4737da94a4aa4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Intel FSP has "debug" build which is not public, used for debugging by
approved developers. Add a Kconfig to indicate that coreboot is building
with debug version of FSP so we can adjust few things (i.e. flash
layout) in the case.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ibc561498d7edcb9d7ec155f090822f1eb25d10cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65466
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Add chipset devicetree and power limits for AlderLake-S platform.
Based on Intel docs #619501, #619362 and #626343.
Change-Id: I1dd72465c458b718ecfcb29c2f7e433a63b89807
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
|
|
Add ADL-S specific table with IRQ constraints to avoid accessing
non-existent devices.
Also when using debug FSP, silicon init would assert on assigning IRQs
for non-existent devices. This patch fixes the problem.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib4464a85bc11a8603bf471ea348bbfc9481db4aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to incorrectly interpreted DOC #630603, the reserved range
remains the same for all ADL platforms and is sync with
src/soc/intel/common/block/acpi/acpi/northbridge.asl which defines the
range as 0xfc800000-0xfe7fffff. The range 0xfe000000-0xfe7fffff was
only mean for static allocations, but the rest is also reserved. The
only difference between ADL-S and other ADL platforms is Trace Hub
base.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9b1f79cc351de422acf182c27870c29dbe57fe4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on adlrvp + rpl silicon
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I8e8b9ec6ae82de7d7aa2302097fc66f47b782323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65117
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Code taken from TGL base.
TEST=Boot MSI PRO Z690-A WIFI DDR4 and see all devices have SSID
applied
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a6d299ec40bac8e29d06926572e375d7d835e29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Extend the code to support ADL-S PCIe Root Ports.
Based on DOC #619362 and #619501.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibb57ad5b11684c0079e384d9a6ba5c10905c1a23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63654
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCIe Root Ports, USB ports and SIO devices for ADL-S chipset.
Add IRQ routing tables for PCIe Root ports up to 28th.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I508fa1396b07f38801bcf50cdfdc876356d7ae9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63785
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
clcok ---> clock
Change-Id: Ie41524f6500479162984fa9050d942f4e295f00a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The details about how the CPU multiprocessor init (MP) has migrated
from coreboot to FSP can be found in
https://doc.coreboot.org/soc/intel/mp_init/mp_init.html.
The major reason behind this migration is to support the Intel
proprietary and restricted CPU feature programming which can't be
performed if coreboot sets the BIOS_DONE or BIOS Reset CPL as part
of coreboot MP Init flow (prior to calling FSP-S). Hence, the new
flow introduced with Tiger Lake platform forced having monolithic
MP Init peformed by FSP (using coreboot MP PPI wrapper code).
The last 3-4 years of FSP doing MP Init has demonstrated ample
issues during platform bringup which is specific to UEFI MP Service
implementation and not relevant to open source coreboot. This new
flow makes the debug and validation aspect complicated where
any FSP MP Init code changes should have been validated with coreboot
MP PPI wrapper else might cause some failure, unfortunately,
the validation commitment has never been met, hence, issue debugging
is the only solution that remains in practice.
Most importantly, the restricted feature programming which demanded
closed source MP Init (for features like SGX and C6DRAM) has never
been enabled in coreboot (starting with Alder Lake, the SGX feature
has been dropped).
This patch attempts to decouple FSP-S doing MP Init from the rest
of the FSP-S silicon init and introduces 2nd MultiPhase SI init
which allows bootloader to perform the mandatory SoC programming
before FSP-S has done with PM programming (a.k.a set the reset CPL).
The core/uncore BWG suggests the minimum SoC programming before
BIOS Reset CPL is set. coreboot uses the MultiPhaseSI Init Index 2
to perform the required CPU programming before enabling the BIOS
Reset CPL.
This implementation would allow us to get rid of FSP running CPU
feature programming and additionally make several EDK2 MP service
modules optional (those are packed to create FSP-S blob).
In summary, this change would allow coreboot to utilize open source
MP init without running into FSP-S related code blocks.
Note: At present, Intel Alder Lake FSP doesn't have support for
MultiPhase SI Init, Index 2 (submitted a FSP code changes over
chrome-internal to enable this feature to decouple MP Init from
FSP-S init).
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Perform several thousands cycles of suspend test and power cycle
without running into any issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I314c63c917ef6fdd32f364b2c60bae22486b8b74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64979
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch drops FSP Debug interface selection as coreboot now decides
the UART inerface to redirect the debug msg.
BUG=none
TEST=Able to see all coreboot and FSP debug log with and without this
patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If8c07d7e63c5d445fdb77ac38b99217bf015e15f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This CL fixes my previous CL (commit ca741055e)
which introduced a couple of issues found by Coverity (see below).
The Coverity explanation is: "Potentially overflowing expression "size_field * 1048576U" with type "unsigned int" (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type "uint64_t" (64 bits, unsigned)."
*** CID 1490122: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
/src/soc/intel/alderlake/systemagent.c: 305 in get_dpr_size()
*** CID 1490121: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
/src/soc/intel/alderlake/systemagent.c: 254 in get_dsm_size()
BUG=b:149830546
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot chromeos-bootimage' builds correctly.
Tested on an Anahera device which successfully boots to ChromeOS
with kernel version 5.10.109-15688-g857e654d1705.
Change-Id: Ib2d66ad24a5ad67b51036ad376a6938f698134c3
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65212
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the desktop board types as per DOC #573387.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8cca98f0fac51e537b472958ee602e116b48f6d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
This patch fixes an issue introduced with commit ca741055e
(soc/intel/adl: Add missing claimed memory regions) where PRMRR base
should be read using MSR 0x2a0 and mask from MSR 0x1f5 instead
System Agent PCI configuration space.
With this change, coreboot is able to read PRMRR base when the
PRMRR size > 0.
TEST=Able to read PRMRR base MSR 0x2a0 in proper with this CL.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3770b1a92dbd2552cf1b9764522c9cac9f29c13c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
|
|
Add GPIO definitions for ADL-S, similarly to how TGL/TGL-H handles
the split.
Based on:
- Intel PCH-S EDS Vol2 (#621483)
- Alderlake-S FSP
- slimbootloader sources
- Linux alderlake-pinctrl driver
Change-Id: I0fd1dc645c19c33bf14424703f966271e884ed3d
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
MAX_PCIE_CLOCK_SRC is not an user-configurable option.
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: Ia49f6e236e8853c377e9096500d96f21dbdc9b8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65298
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates choice that lists all possible options to perform
MP Init as below:
1. USE_FSP_MP_INIT: Allow coreboot to bring APs from reset and FSP
runs feature programming based and selects MP_SERVICES_PPI_V2 config.
2. USE_COREBOOT_MP_INIT: Allow coreboot to perform MP Init (both AP
init and feature programming) using native implementation.
Additionally, selects required RELOAD_MICROCODE_PATCH when coreboot
is expected to run MP Init.
Refactor SoC code to allow required FSP UPD override based on
selected MP Init option.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I20adc1935890c4c6bcd11fd086838f15d0723932
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64977
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a lot of going back-and-forth with the KiB arguments, start
the work to migrate away from this.
Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ADL-S has more USB ports than mobile chipsets. Add missing ACPI
names.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ice5f7784f9de0364681be00fc5cc445caf9d1b3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63655
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When an enabled root port without pcie_rp clock being specified, the
empty structure provides invalid info, which indicates '0' is the
clock source and request. If a root port does not use clock source, it
should still need to provide pcie_rp clock structure with flags set to
PCIE_RP_CLK_SRC_UNUSED. If flags, clk_src, and clk_req are all '0', it
is considered that pcie_rp clock structure is not provided for that
root port.
Add check and skip for enabled root port that does not have clock
structure. In addition, a root port can not use a free running clock or
clock set to LAN.
Note that ClockUsage is either free running clock, LAN clock, or the
root port number which consumes the clock.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I17d52374c84ec0abf888efa0fa2077a6eaf70f6c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch renames identifiers (macros, function and structure names) in
the basecode/debug/debug_feature.c to generic names so that they can be
used to control the features which may have to be controlled either
during pre and post memory.
Currently, the naming of identifiers indicate that it meant to control
the features which can be controlled during only pre-memory phase.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I53ceb25454027ab8a5c59400402beb6cc42884c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Based on DOC #619501, #619362 and #618427
TEST=Boot MSI PRO Z690-A DDR4 WIFI and see the silicon info is
reported as ADL-S.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8051113515ef63fc4687f53d25140a3f55aadb6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Alder Lake-S CPUs do not have TCSS and USB4 devices. Unselect them.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ifc643d440107754dfe1a0844964f70de670cb1f1
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Based on DOC #619501.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia95404e717787edbdb67c9e584e749526b973427
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The Alder Lake chipset has several more reserved memory regions that
are unavailable to the resource allocator than are currently marked
as such in the system agent code. This CL adds the following regions
(documented in Intel docs #626540, #619503):
1. TSEG
2. GSM
3. DSM
4. PCH_RESERVED
5. CRAB_ABORT
6. APIC
7. TPM
8. LT_SECURITY
Claimed regions before this change:
========================================================
base 0 size a0000 // 0 - > 0xa0000
base a0000 size 20000 // legacy VGA
base c0000 size 40000 // RAM
base c0000 size 76f40000 // 0xc0000 -> top_of_ram
base 77000000 size 9400000 // top_of_ram -> TOLUD
base c0000000 size 10000000 // PCIEXBAR
base f8000000 size 2000000 // MMSPI
base fb000000 size 1000 // REGBAR
base fed80000 size 4000 // EDRAMBAR
base fed84000 size 1000 // TBT0BAR
base fed85000 size 1000 // TBT1BAR
base fed86000 size 1000 // TBT2BAR
base fed87000 size 1000 // TBT3BAR
base fed90000 size 1000 // GFXVTBAR
base fed91000 size 1000 // VTVC0BAR
base fed92000 size 1000 // IPUVTBAR
base feda0000 size 1000 // DMIBAR
base feda1000 size 1000 // EPBAR
base fedc0000 size 20000 // MCHBAR
base 100000000 size 17fc00000 // 4GiB -> TOUUD
Claimed regions with this change:
========================================================
base 0 size a0000 // 0 - > 0xa0000
base a0000 size 20000 // legacy VGA
base c0000 size 40000 // RAM
base c0000 size 76f40000 // 0xc0000 -> top_of_ram
base 77000000 size 9400000 // top_of_ram -> TOLUD
base 7b800000 size 800000 // TSEG
base 7c000000 size 800000 // GSM
base 7c800000 size 3c00000 // DSM
base c0000000 size 10000000 // PCIEXBAR
base f8000000 size 2000000 // MMSPI
base fb000000 size 1000 // REGBAR
base fc800000 size 2000000 // PCH_RESERVED
base feb00000 size 80000 // CRAB_ABORT
base fec00000 size 100000 // APIC
base fed40000 size 10000 // TPM
base fed50000 size 20000 // LT_SECURITY
base fed80000 size 4000 // EDRAMBAR
base fed84000 size 1000 // TBT0BAR
base fed85000 size 1000 // TBT1BAR
base fed86000 size 1000 // TBT2BAR
base fed87000 size 1000 // TBT3BAR
base fed90000 size 1000 // GFXVTBAR
base fed91000 size 1000 // VTVC0BAR
base fed92000 size 1000 // IPUVTBAR
base feda0000 size 1000 // DMIBAR
base feda1000 size 1000 // EPBAR
base fedc0000 size 20000 // MCHBAR
base 100000000 size 17fc00000 // 4GiB -> TOUUD
BUG=b:149830546
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot chromeos-bootimage' builds correctly.
Tested on an Anahera device which successfully boots to ChromeOS
with kernel version 5.10.109-15688-g857e654d1705. Also ran dmseg,
and saw the added regions in e820 prints.
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I058a5c1cc59703e35ceddb8a7e26fb22a6a2b75e
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
mch_id is set to zero and then unnecessarily tested.
TEST=build and boot image on ADL RVP board
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I20734e1638714027b976043b3a0457cbf3cd8442
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65121
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MSR_VR_MISC_CONFIG2 is not used by AlderLake code.
TEST=compilation check
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I313acf01c534d0d32620a9dedba7cf3b304ed2ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Alder Lake S CPUs do not have IPU device.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I79b084273f407119d903ed6f0cadf0084e8dda6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Until FSP for RPL and ADL align, mainboards using RPL should select
SOC_INTEL_RAPTORLAKE and SOC_INTEL_ALDERLAKE_PCH_* together.
Currently, ADL FSP headers and RPL FSP headers differ. Use RPL FSP
header with Raptor Lake silicon. This code can be removed once ADL
and RPL start using the same FSP.
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=build adlrvp_rpl_ext_ec
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iaf95352b9cafb81f23522bcf63753d199c0420eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch drops enable_bios_reset_cpl() as FSP sets the BIOS Reset
CPL before performing Graphics PM init (as part of FSP-S), hence,
enable_bios_reset_cpl() function getting called inside systemagent.c
is meaningless.
Also, drop 1ms delay after setting the BIOS reset CPL.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I87beb444d3910f212a5a627cb449031db6cae38d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64837
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig option `SOC_INTEL_ALDERLAKE_S3` which will adjust
the ACPI to not offer D3Cold when using S3.
This patch is the Alder Lake equivalent of CB:59024.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I04df8e106f9d53337b9eb5d2b9041b44a0e36684
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Support up to 10 PCIe source clock out, including source clock out 7, 8, 9.
This allows boards to use source clock 7, 8, 9.
BUG=b:233252409
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I0296974fb8557de1edea7f9ca2d96db0afd8a743
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63943
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
1. add timeout for root port detection and pass to FSP.
2. add 'slot implemented' flag and pass to FSP.
3. PcieRpSlotImplemented needs to be set when the root port is set to
hotplug. There is an assertion in FSP checking this.
4. PcieRpSlotImplemented is updated only when it is built-in as it is
default to slot implemented in FSP.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I13feb1d2d67eaba634a3e700685132fba39e1525
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch renames heci_init() to cse_init() as HECI initialization
should have a bigger scope than just initializing the CSE
(a.k.a HECI1 alone).
BUG=none
TEST=Able to build and boot google/taeko.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic7edd55ccdcd70b244615fa06f81803a0ae6ce80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch adds support for the ADL-N SKUs based on the PCH ID.
Document reference: 645548 (ADL-N EDS Volume 1).
BUG=None
BRANCH=None
TEST=Build FW and test on adln_rvp board
Change-Id: I24c18a27a4a2c68c78bc3dc728c45ba04f57205d
Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64472
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch implements a SoC overrides to set CPU privilege level
as the MSR is not consistent across platforms. For example:
On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4584516102560e6bb2a4ae8c0d036be40ed96990
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Change-Id: I520a936b4c3a8997ba2c6bea0126b3bbcc5d68ce
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The FSP includes a UPD to set the DPA (Dynamic Periodicity
Alteration) PreWake value, which can be used to set the maximum
pre-wake randomization time in "micro-ticks". This patch adds
support for configuring that value.
BUG=b:228410327
TEST=build FW and checked DPA value by fsp log.
Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I08897c590a88aba058cb9e364185ea0794e1e7c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch drops the unused `PCH_DEV_SLOT_LPC` macro from the
Alder Lake SoC PCI device list.
BUG=none
TEST=Able to build and boot taeko, google board.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib2ae40fcc4499de34534f27f03b4c359c37409e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch adds the support to enable the external V1P05/Vnn rails
in S0 state via devicetree.
BUG=b:223102016
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I555e5607af15a5f5d83ef74321b1b71f17cca289
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This patch updates the VccIn Aux Imon IccMax for ADL-N to SOC SKU
specific value of 27A.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:223102016
TEST=Verified that VccIn Aux Imon IccMax value is set to 27mA.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: If09cd1112fac9b30ff04c45aa5a6062c2513c715
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch configures the SKU specific power delivery parameters for the
VR domains for ADL-N.
+--------------+-------+-------+-------+-------+-----------+--------+
| SKU |Setting| AC LL | DC LL |ICC MAX|TDC Current|TDC Time|
| | |(mOhms)|(mOhms)| (A) | (A) | (msec)|
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 081 | IA | 4.7 | 4.7 | 53 | 22 | 28000 |
+ +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 29 | 22 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 081(7W) | IA | 5.0 | 5.0 | 37 | 14 | 28000 |
+ +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 29 | 14 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 041(6W) | IA | 5.0 | 5.0 | 37 | 12 | 28000 |
+ Pentium +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 29 | 12 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 041(6W) | IA | 5.0 | 5.0 | 37 | 12 | 28000 |
+ Celeron +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 26 | 12 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 021(6W) | IA | 5.0 | 5.0 | 27 | 10 | 28000 |
+ +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 23 | 10 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
Kit: 646929 - ADL N Platform Design Guide -> Power_Map_Rev1p0
BUG=b:223102016
TEST=Boot and verify the UPD values are configured properly for ADL-N SKU's.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I3d6ae20323d3e859f52228822d4cbad143921a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
Change-Id: I39e655dec2314a672ea63ba90d8bb3fc53bf77ba
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
|
|
Change-Id: If9ae375629c8af3d32b4c5493b5d63203e8847aa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
GNVS is more fragile as you need to keep struct elements in sync with
ASL code.
Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
coreboot needs to set GPE_EN bit for the GPIOs which are wake capable
from s0ix/sleep. Due to GPIO locking mechanism, coreboot/OS will not
be able to write GPE_EN register post GPIO has been locked.
This patch adds support in SoC code to provide correct offset for
GPE_EN and GPE_STS registers to the common code.
Plan is to use this offsets to set GPE_EN bits before GPIO locking
in coreboot which will be part of subsequent CL.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Check if code compiles for Brya and correct offset values are printed.
Change-Id: I6b813b30b8b360f8eccbf539b57387310e380560
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Clang does not like array declarations inside plain switch cases. There
are 2 options to fix this: use a block inside the switch statement, or
declare it outside the switch statement. This does the latter.
Change-Id: I9a02136fd63ac171b2bec4647c30c7eece930246
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
CID 1488814: Uninitialized variables (UNINIT)
Commit c66ea98 introduced an issue after static analysis on merge.
Because every APIC is associated with a CPU, this did not result in
any issues at runtime but should be fixed/cleaned up. Now, the path
name is initialized to null.
Fixes: Coverity CID 1488814, commit c66ea98
TEST=Built on brya
Change-Id: I0cfc8fd7a0c39e6610a9361630e3755293084f3d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ifc0374ed49ecefc57dec8e72e73bac031838a9f5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64238
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement sub-function 1 (Get Device Constraints)
of the Low Power S0 Idle Device-Specific Method (_DSM).
This provides a way in which to describe various devices required
D-states to enter LPM (S0ix). The information can be used to help
in diagnostics and understanding of S0ix entry failure.
Values were derived from Intel document 595644 (rev 0.45) and
the ADL FSP sample ASL.
This implementation adds support for ADL. Other SoC's could be
ported to be included as well. If they aren't, they will default
to the existing behavior of a single hardcoded device to ensure
compatibility with Windows.
TEST=Built and tested on brya by verifying SSDT contents
Change-Id: Ibe46a0583c522a8adf0a015cd3a698f694482437
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
|
|
A few ACPI device path name handlers are missing. Add handling
to ensure that these names are returned during acpi_device_path()
calls.
TEST=Built and tested on brya
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I37d6dd5df921c931af72dd469c3f4067c61b0df3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch calls into the PMC IPC function that informs about PMC
enumeration.
Note: Alder Lake FSP Notify Phase 1 callback missed to send this PMC
IPC, hence, this patch is considered as an improvement over FSP Notify
Phase API.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS without any PMC IPC
error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I43cfad25a5861c5aa5dae293ff42c9cefe862ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
ADL-S CPU has maximum 3 PCIe interfaces when the x16 link is bifurcated
into two x8 links. ADL-S PCH has up to 28 PCIe Root Ports, 18 CLKOUT and
CLKREQ signals. ADL-S CPUs do not have Thunderbolt.
Based on the Intel DOC #619501 and #619362.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I408c815d5a43c081beb3f84d795c2b863ce33eb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Now the bootblock is not limited to 64K so integrating vboot into the
bootblock reduces the binary size. intel/apl is an exception since the
bootblock size is limited to 32K.
Change-Id: I5e02961183b5bcc37365458a3b10342e5bc2b525
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch decouples HECI disabling interface a.k.a SMM or PCR or PMC
IPC etc. from DISABLE_HECI1_AT_PRE_BOOT kconfig as Intel ME BWG
recommends to disable the CSE PCI device while CSE is in
software temporary disable state.
BUG=b:228789015
TEST=Able to build google/redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I66abc04d5e195515165a77b0166d004f17d029e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
`sa_lockdown_cfg` function ensures locking the PAM register hence,
skip dedicated calling into `sa_lock_pam()` from the SoC
`finalize.c` file. Dropped sa_lock_pam() call from ADL/CNL/EHL/JSL
and TGL.
Additionally, this patch enforces SA lockdown configuration for SKL
and ICL as well.
BUG=b:211954778
TEST=Able to build google/brya with these changes.
> localhost ~ # lspci -xxx | less
00:00.0 Host bridge: Device 8086:4601 (rev 04)
Bit 0 for all PAM registers a.k.a, PAMx_0_0_0_PCI.LOCK bit is set
(meaning locked).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd464d2507393ed0c746eb1fbd10e36092ed5599
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Alder Lake SoC deselects USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM Kconfig
to skip FSP notify API (Post PCI Enumeration) and make use of native
coreboot driver to perform SoC recommended operations prior booting to
payload/OS.
BUG=b:211954778
TEST=Able to build brya with these changes and coreboot log with this
code change as below when ADL SoC selects required configs.
[INFO ] coreboot skipped calling FSP notify phase: 00000020.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I46f6ca791fb60b417d205d0a54705f3481deebd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch implements a function to enable IOSF Primary Trunk Clock
Gating.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie28dde8f62adc5bafc4a42e608827f51da82570c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch locks PMC features like: debug mode configuration and host
read access to PMC XRAM.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I29178bdd9a94a24ca7056eb7377625f41a43c33c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch performs locking of the PMC soft strap message interface.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS. Verified Bit 0 of PMC
MMIO register 0x104c is set as below.
> localhost ~ # iotools mmio_read32 0xfe00104c
0x00000001
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1ae972a203affa54c03de71f0f702356334cbf7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch performs PMC static function lockdown.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS. Verified PMC static PG
lock (bit 31) is set.
> iotools mmio_read32 0xfe001e20
0x80000000
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I68343f9af4f34aceae06293c5f87c5eaa3430a60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The unit of dram speed is MT/s so append it on variable name.
BUG=b:229549930
BRANCH=none
TEST=build coreboot without error
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I83c780440613050c0202f95d5f64991b61d9c280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch refactors the `pmc_lockdown_cfg()` to remove the helper
functions and uses the `setbits32` function to enforce bit locking
as applicable.
BUG=b:211954778
TEST=Able to build google/redrix with these changes and boot to OS.
> localhost ~ # iotools mmio_read32 0xfe0018c4
0x85000000 (bit 31 is set)
> localhost ~ # iotools mmio_read32 0xfe001024
0x00062610 (bits 4, 17 and 18 are set)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic96da4638aa689b5fa47a3356986ca5a0343fe36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I529c822c9e952dae6613d3de64f6709e0fd9b385
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Remove dmi.h as it's migrated as gpmr.header
2. Remove unused gpmr definitions
3. For old platforms, define DMI defintions in c code
for less code changes.
TEST=Build
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ib340ff1ab7fd88b1e7b3860ffec055a75e562de7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Insert CSE timestamps to coreboot timestamp table.
BUG=b:182575295
TEST=Boot to OS on Brya Redrix board.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ifbea7155a294e0039a5bd1d16588775e90a29ae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
UFS(Universal Flash Storage) is the next generation storage standard and
a SCSI storage technology. It is also a successor of eMMC.
Following changes are needed to add support for UFS -
1) Add UFS controller to chipset.cb and keep it off by default
2) Hook up FSP enable UPD for UFS #1 to the device from chipset.cb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I92f024ded64e1eaef41a7807133361d74b5009d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch adds mechanism in the Alder Lake SoC code to control PCH
USB2 Phy power gating from brya board variant's devicetree. Please refer
Intel doc#723158 for more information.
BUG=b:221461379
TEST=Build and boot Gimble board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I3d80a3e36c6f8a3c0f174f955b11457752809f4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
PCH-S maps certain MMIO BARs differently than low power PCHs. The
reserved ranges taken from Intel DOC #630603.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ifefedc629def207ecd6f7be792f6e12fb6016cc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some Super I/Os may be strapped to respond on the secondary ports
0x4e/0x4f. Enable them early so that mainboard is able to initialize
a serial port for example.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6df158f54a48fb9f3173a4b209316c8116aa265a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
According to Intel DOC #630603 P2SB BAR must be at 0xe0000000 for
PCH-S.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie6db3f7108ff1edf62c94876412adfc6421034d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I1461a8cc3c131a6e2499df8e1ebc67f5fb3b9e35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The FSP available at Intel R&DC kit #1000166 indicates FSP version 2.3
in the FSP headers.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0af7faa603cb19b530513f531a28bd8b283baba2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Introduce SOC_INTEL_ALDERLAKE_PCH_S symbol to differentiate from the
low power chipsets.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I47676723747458b8b7fe726e900843c198901bda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|