| Age | Commit message (Collapse) | Author |
|---|
|
Extracted from NDA spec #56995:
"The A/B recovery scheme formally separates the SPI flash space into
different partitions; a primary, “A” and secondary, “B”, which hold
the same set of system firmware. Under this scheme, the partitions A
and B can hold identical contents initially, but each partition can be
updated individually.
Normally the system boots from partition A, but if the A partition is
found to be corrupted, the system will switch to partition B and
boot. The OEM BIOS can then choose to continue the boot from partition
B, or repair partition A using contents from partition B."
The Cezanne platform supports both A/B recovery and no recovery
method. It needs this flag passed to amdfwtool to enable the A/B
recovery layout.
Change-Id: Id1c8028faee9c544628d65fd77be2a378ed7eab6
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Pass the PSP NVRAM base and size to amdfwtool for all SoCs except Genoa
and Stoneyridge which don't use/support this.
If a mainboard has an section named 'PSP_RPMC_NVRAM' in its FMAP file,
the start and length of it in the flash will be passed to amdfwtool
which then adds the base and length to the corresponding type 0x54 PSP
directory table entry.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id9f8a7eec68a5222be63e46173132f1c4a461b4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83815
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Pass the PSP NVRAM base and size to amdfwtool for all SoCs except Genoa
which doesn't use/support this. This was previously only implemented for
Picasso, but not for the SoCs that support this, so add the support to
those other SoCs as well.
If a mainboard has an section named 'PSP_NVRAM' in its FMAP file, the
start and length of it in the flash will be passed to amdfwtool which
then adds the base and length to the corresponding type 0x04 PSP
directory table entry.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I785ede8eb0df2473a4390b2c305add20f38d7ede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83814
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The PSP can send SMIs to the x86 side to have the SMI handler service
requests from the PSP. This commit adds an empty PSP SMI handler; the
actual implementation is added in later patches to keep the patches
relatively small.
This patch is a slightly modified version of parts of CB:65523.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I65989ff529d728cd9d2cd60b384295417bef77ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83739
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PSP code introduced in a following patch needs both SoC-specific
functions get_iohc_info and get_iohc_non_pci_mmio_regs to also be
available in SMM, so add those compilation units to the corresponding
target.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4e32084b45f07131c80b642bc73d865fc57688a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Instead of implementing the functions get_iohc_misc_smn_base and
get_iohc_fabric_id in the SoC code, move those functions to the common
AMD code, and implement get_iohc_info in the SoC code that returns a
pointer to and the size of a SoC-specific array of domain_iohc_info
structs that contains the info needed by the common code instead. This
allows to iterate over the domain_iohc_info structs which will be used
in a later patch to find the PSP MMIO base address in both ramstage and
smm.
TEST=Mandolin still boots and all non-PCI MIO resources are still
reported to the resource allocator
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifce3d2b540d14ba3cba36f7cbf248fb7c63483fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83443
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add AMD SOC Family 17h Renoir CPUIDs per PPR doc #55922
Renoir is similar to Cezanne with only differences in CCX count.
Cezanne has one Zen3 CCX with 8 cores per CCX compared to
the two Zen2 CCX with 4 cores per CCX. Hence, coreboot side
Cezanne SOC code should be mostly compatible with Renoir and
can be leveraged.
Change-Id: I6b43eb782527351c79b835d094a5b61103cd6642
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83099
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7d7ad562eeff7247b7377b6570d489faee0aeda0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82669
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
When linking in page tables more place is needed. Size the bootblock is
top aligned, this has no impact the final size for existing setups.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I23f176d63d3c303b13331a77ad5ac6c7a19073d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Since the code for reporting the memory map below cbmem_top is basically
identical for all non-CAR AMD SoCs, factor this out into a common
read_lower_soc_memmap_resources implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id64462b97d144ccdf78ebb051d82a4aa37f8ee98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81389
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Even though it has an 'amd_' prefix, the amd_pci_domain_fill_ssdt
implementation doesn't contain any AMD-specific code and can also be
used by other SoCs. So factor it out, move the implementation to
src/acpi/acpigen_pci_root_resource_producer.c, and rename it to
pci_domain_fill_ssdt. When a SoC now assigns pci_domain_fill_ssdt to its
domain operation's acpi_fill_ssdt function pointer, the PCI domain
resource producer information will be added to the SSDT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7bd8568cf0b7051c74adbedfe0e416a0938ccb99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80464
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gpp_clk_setup code in most AMD SoC is similar and it can moved to common
code. The only thing which is SoC dependent in this function is the SoC
config, hence keep it in SoC code and move everything else in new
gpp_clk_setup_common function which is in soc/amd/common. Picasso and
Glinda don't have pcie_gpp_dxio_update_clk_req_config fixup function so
they are addressed in later patches.
Change-Id: I7d7da4bfe079f07e31212247dbf3acd14daa6447
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80285
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop the unneeded data_fabric_set_mmio_np function and the corresponding
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION Kconfig symbol. In systems
with only one FCH, its MMIO region will be subtractively decoded and
there's no need to add a non-posted data fabric MMIO region after the
FSP/openSIL has already configured the data fabric decode windows. In
systems with more than one FCH, openSIL will already take care of
initializing everything for the additional FCH, so we also won't need to
do anything in that case. Since dropping this function also removes both
data_fabric_print_mmio_conf calls before and after adding the unneeded
non-posted MMIO region, replace the data_fabric_set_mmio_np call with a
data_fabric_print_mmio_conf call to still print the data fabric MMIO
decode regions set up by the FSP/openSIL.
TEST=Mandolin still boots successfully
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I474b6e066060abb3fe5b78505521c7782cc192ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Make the initialization of the IOAPIC(s) in the PCI root(s) common
across all AMD family 17h+ SoCs. For this the more general
implementation from the Genoa code that supports multiple PC roots is
moved to the common AMD code. All other family 17h+ SoCs are then
adapted to use the common code. For those non-Genoa SoCs, the
initialization of this second IOAPIC is moved from the northbridge
device to the domain device above to match Genoa.
Test=Both the FCH IOAPIC and the PCIe root IOAPIC are still initialized
on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7c0ec6ac2f11cb11e46248cceec96c1fd2a49c16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80286
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the SoC-specific memory map is reported on the domain device
instead of the northbridge device, factor out the
read_soc_memmap_resources function from root_complex.c to new memmap.c
file. For now each SoC still has its own memmap.c file, but the plan is
to eventually have a common implementation that works for all AMD family
17h+ SoCs. For that I'll still need to look closer into the differences
between the FSP and the openSIL integration though.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd7659e9a55de9df24118b6d6c885a21dc6f14a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since reporting the PCI ECAM MMCONF MMIO region and the IO ports for the
legacy PCI config space access is needed on all AMD SoCs, implement a
common add_pci_cfg_resources function that reports both and gets called
from amd_pci_domain_read_resources and don't report those in the SoC-
specific code any more. The only functional change is that on Genoa now
the IO ports used for the legacy PCI config space access get reserved.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibbcc2aea4f25b6dc68fdf7f360e5a4ce53f6d850
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Introduce read_soc_memmap_resources which gets called by
amd_pci_domain_read_resources for the first domain of the SoC to report
the DRAM and PCI config space access resources to the allocator. For
Genoa this allows to use amd_pci_domain_read_resources as read_resources
in the genoa_pci_domain_ops instead of needing to wrap that call to be
able to call add_opensil_memmap for the first domain. For the other
family 17h+ SoCs the moves the reporting of the DRAM resources and the
PCI config space access resources from the northbridge device to the
domain device.
TEST=Resources still get reported on Mandolin, but now under the domain
instead of the northbridge PCI device
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib19fd94e06fa3a1d95ade7fafe22db013045a942
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80268
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use an unsigned long as resource index type instead of an int to match
the data type used for the index in the resource struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0f58e32a535326116460545287cc59aaf94166a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The CRAT (Component Resource Attribute Table) isn't used on the APUs
from Renoir on and has also been marked as deprecated in version 6.5 of
the ACPI specification. So remove the 'TODO: look into adding CRAT'
comment from all SoCs from Renoir/Cezanne on.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3ea1e3678608b0ace2a1ff7fc104594e90c91476
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80227
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the acpi_add_fsp_tables implementation is identical for all SoCs,
factor it out and move it to the common AMD FSP code. Also guard the
acpi_add_fsp_tables call in soc_acpi_write_tables with
if (CONFIG(PLATFORM_USES_FSP2_0)) to properly handle the FSP dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8917a346f586e77b3b3278c73aed8cf61f3c9e6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80225
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Factor out acpi_add_fsp_tables from the soc_acpi_write_tables function
and move the remaining parts of the soc_acpi_write_tables function to
the SoC's acpi.c. This aligns the other family 17h/19h SoCs more with
Genoa and only leaves the FSP-specific code in agesa_acpi.c which will
be made common in a following patch. I decided against also renaming
agesa_acpi.c to acpi_fsp.c, since that would have made the diff less
readable and the files get deleted in a following patch anyway.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia87ac0e77c5e673e694703b85a4bab85a34b980e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
ACPI_SCI_IRQ is defined as 9 for all AMD SoCs, so move the definition to
the common amdblocks/acpi.h. Since all but Stoneyridge's soc/acpi.h are
now empty, delete those files too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8210c98dc4cf2c6001d5273d132053278ff7fea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80222
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the definition is the same for all SoCs, move it to the common
amdblock/acpi.h header. Since the Stoneyridge northbridge.c file also
includes this prototype, remove the static attribute of the function
there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9aa215f2b4ba58f43fed2c751d989f1719e0a17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80221
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A pointer to soc_acpi_write_tables gets assigned to the
write_acpi_tables element of the device_operations struct, so make sure
that the function has the expected function signature which in this case
means using unsigned long as type for both the 'current' parameter and
the return value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iee45badb904fa20c6db146edbc00c40ca09361d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80218
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's not the AGESA code that generates most of the ACPI tables, so
rename the function. This also aligns the other SoCs more with Genoa.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b2e6c4cb7139c8bde01b4440ab2e923a1086827
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80217
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the verstage on PSP files in vendorcode from the fsp subdirectory
to a new psp_verstage subdirectory, since those files aren't specific to
the case of the FSP being used for the silicon initialization.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic47f8b18bc515600add7838f4c7afcb4fff7c004
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80209
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Instead of open-coding this functionality in all AMD SoCs, factor it out
into a common implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb65c398b747e70ec67107e0a1d4bd6551501347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80208
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie449267fe4fdd75110f577e1b9f748cd06140950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Move the call into the FSP code to a file in the common AMD FSP code to
isolate the FSP-specific parts of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic8236db7ac80275a65020b7e7a9acce8314c831c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since the romstage code is very similar between all AMD non-CAR SoCs,
factor out a common romstage implementation. All SoCs that select
SOC_AMD_COMMON_BLOCK_PM_CHIPSET_STATE_SAVE call fill_chipset_state, so
this Kconfig option can be used to determine whether to make that call.
In the FSP case, amd_fsp_early_init gets called, while in the case of an
implementation that doesn't rely on an FSP to do the initialization,
cbmem_initialize_empty gets called to set up CBMEM which otherwise would
be done inside the FSP driver code. Since only some SoCs call
fch_disable_legacy_dma_io again in romstage right after
amd_fsp_early_init, introduce the new
SOC_AMD_COMMON_ROMSTAGE_LEGACY_DMA_FIXUP Kconfig option, so that the
SoCs can specify if this call is needed or not.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a0695714ba08b13a58b12a490da50cb7f5a1ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80083
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move the call into the FSP code to a file in the common AMD FSP code to
isolate the FSP-specific parts of the code and a preparation to make the
romstage of all non-CAR AMD SoCs common. Without isolating the call into
the FSP-M code, building the common romstage would fail for genoa_poc
due to fsp/api.h not being in the include path.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I30cf1bee2ec1a507dc8e61eaf44067663e2505ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The acpi_fill_madt implementation from the Genoa PoC also works for the
other AMD SoCs that select SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN, so
factor out this function to the common AMD ACPI code and change those
other SoCs to use the new common functionality instead of having their
own implementations.
The old code on the single-domain SoCs used the GNB_IO_APIC_ADDR base
address to create the MADT entry for the additional IOAPIC in the root
complex. The new code iterates over all domains and looks for a resource
with the IOMMU_IOAPIC_IDX index in each domain and if it finds it, it
creates an MADT entry for that IOAPIC. This resource is created earlier
in the boot process when the non-PCI resources are read from the IOHC
registers and reported to the allocator.
TEST=The resulting MADT doesn't change on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cc0d3f30b4e6ba29542dcfde84ccac90820d258
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79861
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Call fill_fadt_extended_pm_io directly from the SoC's acpi_fill_fadt
functions instead of calling fill_fadt_extended_pm_regs that only calls
fill_fadt_extended_pm_io.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I442bc2801cf74c1d836d3b0d88f281bceb5122b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79529
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CLKREQ programming as currently implemented is completely dependent on
FSP DXIO descriptors, so move under common/fsp/pci and rename the
Kconfig to reflect the move.
TEST=build google/{guybrush, skyrim, myst}
Change-Id: I87b53d092ddc367b134c25949f9da7670a6a1d88
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Function 0 of the devices that have the bridges to other buses are dummy
functions that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on those devices isn't
enabled. Those dummy device functions are however not PCI host bridges,
so change the comments from 'Dummy Host Bridge' to 'Dummy device
function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ibddfdf558d84bc44434d718b86f41bd06044b22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Select PSP_VERSTAGE_MAP_ENTIRE_SPIROM in Cezanne Kconfig instead of
common Kconfig.
BUG=None
TEST=Build BIOS image and boot to OS in dewatt.
Change-Id: I476971700824fed06d17000001afc075105fa1ee
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79306
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0eae9e4d246bd07f43b1d77e5ad7649c010d0efe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Commit e728766f4596 ("soc/amd/mendocino: Do not load MP2 Firmware when
in RO") added logic to ensure that the MP2 disable soft fuse bit was set
for the RO section, but failed to check if the bit was already set
otherwise (as it is for non-ChromeOS builds). This caused the bit to
appear twice in the PSP_RO_SOFTFUSE_BITS string, and when the string
was converted to a series of numeric values and added together, bit
(n+1) ended up being set instead of bit n.
To mitigate this, use the makefile sort() function to ensure the
PSP_[RO_]SOFTFUSE_BITS string does not contain any duplicates before
the bitmask is calculated. Apply this to all AMD SoC makefiles where
the softfuse bits are added.
TEST=build/boot google/skyrim (frostflow). Use a verbose build (V=1)
to verify that the correct soft fuse value is passed to amdfwtool for
RO and RW_A/B for both ChromeOS and non-ChromeOS builds.
Change-Id: I2e207e20132d44016fbcb986bdfd8e935d8fead5
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78823
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Move all security patch level (SPL) related Kconfig options to the
common AMD PSP Kconfig file. Commit 4ab1db82bb30 ("soc/amd: rework SPL
file override and SPL fusing handling") already reworked the SPL
handling, but missed that another Kconfig option
SOC_AMD_COMMON_BLOCK_PSP_FUSE_SPL controlled if the PSP mailbox command
to update the SPL fuses was sent by the code that got added to the build
when PERFORM_SPL_FUSING was selected.
To make things less unexpected, rename PERFORM_SPL_FUSING to
SOC_AMD_COMMON_BLOCK_PSP_SPL since it actually controls if the SPL
support code is added to the build and also rename
SOC_AMD_COMMON_BLOCK_PSP_FUSE_SPL to PERFORM_SPL_FUSING. This changes
what PERFORM_SPL_FUSING will do from including the code that could do
the fusing if another option is set to being the option that controls if
the fusing mailbox command will be set. All SoCs that support SPL now
select SOC_AMD_COMMON_BLOCK_PSP_SPL in their Kconfig, which won't burn
any SPL fuses.
The logic in the Skyrim mainboard Kconfig file is reworked to select
PERFORM_SPL_FUSING for all boards on which the SPL fuses should be
updated; on Guybrush PERFORM_SPL_FUSING default is changed to y for all
variants. The option to include the code that checks the SPL fusing
conditions and allows sending the command to update the SPL fuses if the
corresponding Kconfig is set doesn't need to be added on the mainboard
level, since it's already selected at the SoC level.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I12fd8775db66f16fe632674cd67c6af483e8d4e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The SPL_TABLE_FILE and SPL_RW_AB_TABLE_FILE Kconfig options provide a
way to override the default SPL file configured in the SoC's fw.cfg file
by passing the '--spl-table' parameter to amdfwtool which will then use
the override instead of the SPL file from the fw.cfg file. When
SPL*_TABLE_FILE is an empty string, the corresponding add_opt_prefix
call in the makefile will result in no '--spl-table' parameter being
passed to amdfwtool, so it'll use the default SPL file from fw.cfg. In
order to not pass an SPL override by default, remove the default from
the SPL_TABLE_FILE in the SoC's Kconfig. The SoC default pointed to the
same SPL file as in fw.cfg file anyway. Now only when a mainboard sets
this option to point to a file, that file will be used as an override.
This override is used to include a special SPL file needed for the
verstage on PSP case on the Chromebooks. Since SPL_TABLE_FILE is an
empty string by default, neither the SPL_TABLE_FILE Kconfig option nor
it being evaluated in the Makefile need to be guarded by HAVE_SPL_FILE,
so remove the dependency in the Kconfig and the ifeq in the Makefile.
Before this patch, the HAVE_SPL_FILE option controlled two things that
shouldn't be controlled by the same Kconfig option: Only when
HAVE_SPL_FILE was set to y, the SPL_TABLE_FILE override was taken into
account, and it also controls if spl_fuse.c got added to the build which
when added will send the SPL fusing command to the PSP. So the case of
needing an SPL file override, but not updating the SPL fuses wasn't
supported before.
The SPL file in the amdfw part will be used by the PSP bootloader for
the anti-rollback feature which makes sure that the SPL file version
isn't lower than what is in the SPL fuses. For this the SPL file needs
to be present in the PSP directory table. The SPL version check happens
way before we're running code on the x86 cores. The SPL fusing PSP
command that can be sent by coreboot will tell the PSP to update the SPL
fuses so that the fused minimal SPL version will be updated to the
current SPL version.
Since the former HAVE_SPL_FILE option now only controls if the SPL
fusing command will be sent to the PSP mailbox, rename it to
PERFORM_SPL_FUSING to clarify what this will do and update the help text
correctly describe what this does.
TEST=With INCLUDE_CONFIG_FILE set to n, timeless builds for both Birman
with Phoenix APU and Skyrim result in identical binaries.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6cec1f1b285fe48e81a961414fbc9978fa1003cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78178
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since all non-CAR AMD SoCs have the same mp_init_cpus implementation,
factor it out and move it to a common location.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibf4fa667106769989c916d941addb1cba38b7f13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
When the eMMC MMIO device is enabled in the devicetree, it needs to be
exposed in ACPI in order for the OS driver to be able to attach to it.
The Cezanne eMMC controller isn't used in google/guybrush, so this the
code path where the eMMC MMIO device is enabled in the devicetree can't
be easily tested.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I69ff79b2d1c6a08cf333a2bb3996931962c2c102
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add a separate Kconfig option for adding np_region.c to the build. Only
the code for Picasso, Cezanne, Mendocino, Phoenix and Glinda call
data_fabric_set_mmio_np which is implemented in that file, so only
select the new SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION Kconfig option
for those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic49ce039462b52e2c593c7d2fef43efc50901905
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77987
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EFS data structure diagrams in the Makefiles of Picasso and newer
SoCs were wrong, since the BIOS directory table pointer is in a
different location than shown in the diagram. Since the diagram also
wasn't that easy to understand and amdfwtool does all of that handling,
drop the wrong diagram from the Makefiles.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f86fea29f956ff10746d35dbe967a4a89e11cca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Instead of reporting all I2C controllers in the system as enabled in the
corresponding ACPI device's _STA method, report the I2C devices that are
disabled in the devicetree as disabled in the corresponding _STA method
too. This is done by returning the contents of the STAT variable inside
each device's scope in the DSDT that have a default value of 0 (device
not present/disabled). For all enabled and hidden I2C devices
i2c_acpi_fill_ssdt gets called which then writes 0xf (device enabled and
visible) or 0xb (device enabled, but hidden) to the STAT name inside the
same scope, but in the SSDT. This object in the SSDT will then override
the default in the DSDT resulting in the _STA method returning the
correct status of each device. The code was inspired by
commit 7cf9c7451808 ("soc/amd/*: Fix UART ACPI device status").
TEST=On Mandolin all I2C controllers are disabled and with this patch
none shows up in the Windows 10 device manager. When enabling an I2C
controller in the devicetree for testing, it shows up again in the
Windows device manager.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cd9f447ded3a7f0b092218410c89767ec517417
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Automatically include the FSP binaries needed to boot a board if
USE_AMD_BLOBS is selected. Simplifies board configs, and matches
use in soc/amd/picasso.
TEST=build/boot google/guybrush
Change-Id: I5b6e34085410a2aafe5d7876be5097f28f521ce8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77624
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is based on work by Arthur Heymans, 69852.
Get rid of the confusing "position index" and use the relative flash
offset as the Kconfig setting instead.
TEST=binary identical on amd/birman amd/majolica amd/gardenia
amd/mayan amd/bilby amd/mandolin amd/chausie amd/pademelon
pcengines/apu2
google/skyrim google/guybrush google/zork google/kahlee google/myst
(The test should be done with INCLUDE_CONFIG_FILE=n)
Change-Id: I26bde0b7c70efe9f5762109f431329ea7f95b7f2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The psp_transfer.h file was the same under all SoCs, and is really
tied to the file common/vboot/transfer.c, not the SOC.
This patch makes an include directory under vboot to put the header into
and sets it to be included for all SoCs using SOC_AMD_COMMON. This makes
the header file available to all platforms, so that new chips that don't
use the psp_verstage don't have to make a psp_transfer.h file just to
satisfy the compiler.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b9f2adee3a1d4d8d32813ec0a850344b7d717b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77303
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement get_iohc_fabric_id for each SoC that translates the coreboot
domain number to the fabric ID of the corresponding PCI root. This
allows the primary domain to have the number 0 even though the
destination data fabric ID will be non-zero. Keeping the primary domain
number 0 allows to use config_of_soc() which can be resolved at link
time and not need to dynamically find the SoC device to get the config.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6538a777619eed974b449fc70d3fe3084ba447dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change-Id: I8fa26e7a398eee855c31a76f0f89b4111368c2a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfac7d996c6de9ea7c6adf2760de0ad97ffb9ec0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Prior to commit d1c0f958d198 ("acpi: Call acpi_fill_ssdt() only for
enabled devices"), uart_inject_ssdt() was used to set the ACPI status
(_STA) for both enabled and disabled devices. The aforementioned commit
limited it to being called only on enabled devices, which left disabled
devices without any _STA method at all -- which the OS assumes means
that the device is present and enabled.
To fix this, create the _STA method in the UART asl code for each port,
and set the return value to a name variable (STAT) which defaults to
0 (not present/disabled). Then, have uart_inject_ssdt() set STAT to
present and enabled (0xF) for UARTs actually present on the board.
TEST=build/boot google/skyrim (frostflow), dump ACPI tables, and verify
that _STA returns 0xF only for UARTs enabled in devicetree.
Change-Id: Id89e74c3ea7f53280935898ee35311b7cf3b152a
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77092
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifcae9c9ad664d50100cd40692fd9631845f76671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Rename the fabric_id struct field in the df_mmio_control union to
dst_fabric_id to both better match the register definitions and also be
a bit clearer about what this is doing. Also use tabs for indentation in
the struct inside the df_mmio_control union.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0a17d82a5d7b66a8f84854f21fbbb319da81ac43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Order the data fabric register definitions by function number and
register offset.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia3066ad0f564520cb322a3e41a413eb3bf51260d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Now that the data fabric PCI device functions are included in the
register definitions, the remaining data fabric device function numbers
can be dropped from the define names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia0355838ac1d513ba562fd6fb4672342dd383498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76888
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To have both the PCI function number and the register offset into the
config space of that function of the data fabric device in the data
fabric register definitions, introduce and use the DF_REG_ID, DF_REG_FN
and DF_REG_REG macros. The DF_REG_ID macro is used for register
definitions where both the function number and the register offset are
specified, and the DF_REG_FN and DF_REG_REG macros are used to extract
the function number and the register offset from the register defines.
This will allow having one define for accessing an indexed group of
registers that are on different functions of the data fabric device.
TEST=MMIO resources read from the data fabric's MMIO decode registers
don't change on Mandolin and the ACPI CRAT table is also identical.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I63a284b26081c170a217b082b100c482f6158e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76886
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
header="src/soc/amd/common/block/include/amdblocks/post_codes.h \
src/include/cpu/intel/post_codes.h \
src/soc/intel/common/block/include/intelblocks/post_codes.h"
array=`grep -r "#define POST_" $header | \
tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2`
for str in $array; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r $str src | cut -d ':' -f 1 | \
xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g"
done
Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Factor out the common FSP-specific code to report the usable and
reserved memory resources read from the HOBs that FSP has put into
memory. This both reduces code duplication and also moves FSP-specific
code out of the SoC code into the FSP-specific common AMD SoC code
folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib373c52030209235559c9cd383f48ee1b3f8f79b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76759
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
On the mobile SoCs, SMN_IOHC_MISC_BASE_13B1 is the only IOHC misc base
address, but on for example Genoa it's the address of the IOHC misc base
of the second IOHC. Due to it not being the first one on Genoa, use 13B1
as part of the name instead of using an index of 0 which would look odd
in the Genoa case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1db28ec03a3ba1c2040d8a1500ae17aa9705f6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76756
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since the per PCI root IOAPIC is now reported as domain MMIO resource
and the IVRS code now again probes for the IOAPIC resource on the domain
device, the IOAPIC resource doesn't need to be reported as resource of
the northbridge PCI device any more.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8604bd321ec4239076b1be99dca095e47f8b75a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76600
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add the SoC-specific non-PCI MMIO register list. PPR #56569 Rev 3.04 was
used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id99c64c172481984306814980a1ddf0b2d535413
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Do not add type 0x63 entry to amdfw.rom when APOB_NV cache is disabled.
BUG=b:290763369
TEST=boot birman multiple times with/without APOB_NV cache enabled
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iefe6f56d7dbedd289680f25a5f372eaa12e967b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76568
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SoC family is able to provide SoC-specific information
via amd/fsp/<soc_family>/soc_dmi_info.h.
Use common amd/fsp/common/dmi_info.h for all AMD platforms.
This way, duplicated dmi_info.h files in
vendorcode/amd/fsp/<soc_family>/ can be removed.
BUG=b:288520486
TEST=Dump `dmidecode -t 17`.
Change-Id: I5e0109af51b78360f7038b20a2975aceb721a7d5
Signed-off-by: Konrad Adamczyk <konrada@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76107
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If2048c9cade731b2e4464d0670e0578f5f4bcea0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Factor out all functions that use the indirect IO port based access to
the PM registers into a new compilation unit and only select it on
platforms that support this interface.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If9c059e450e2137f7e05441ab89c1f0e7077be9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Commit cde4f3b2790d ("acpi/gnvs.c: Drop unused pointer to the cbmem
console") removed writing the coreboot memory console pointer to the
GNVS and kept the CBMC field as reserved. Since those fields aren't
needed any more and there are no dependencies on the absolute position
of the different fields in GNVS as long as both GNVS definitions on the
C and the ASL side match, remove the deprecated and unused CBMC field
from the GNVS structs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iadfaf5a4ec1401b027dbfb6a7c6ce74a1dcecdfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76351
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Use the _tohex function to convert values to hex instead of 'shell
printf'
TEST=timeless builds identical for grunt,dalboz,guybrush,chausie,birman
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic7f7d1b764479088cc0980b208d8d603bc712832
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76314
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Change-Id: I7e2018dbccead15fcd84e34df8207120d3a0c57c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64303
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Replace:
$(shell awk '$$2 == "xyz" {print $$3}' $(obj)/fmap_config.h)
with:
$(call get_fmap_value,xyz)
to improve code readability/maintainability.
Change-Id: If6859108c7d5611a63fc38909dc75195bfb1d59a
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76168
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \
src/commonlib/include/commonlib/console/post_codes.h;
myArray=`grep -e "^#define POSTCODE_" \
src/commonlib/include/commonlib/console/post_codes.h | \
grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`;
for str in ${myArray[@]}; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r POST_$splitstr src | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
grep -r "POST_$splitstr" util/cbfstool | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
done
Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8
Signed-off-by: lilacious <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I296697d579b9ad8e35b22ada939a74a5ef6d6f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75828
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This makes sure that the resource allocator won't use this address range
for anything else. In the systems I looked at, this was between the end
of the above 4GB memory and the beginning of the above 4GB PCI BAR MMIO
region, but better reserve it here so nothing else will get allocated
there if this expectation isn't met.
TEST=Reserved region is printed in the console logs:
update_constraints: PCI: 00:00.0 09 base fd00000000 limit fdffffffff mem (fixed)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5a8150873cb019ca1d903ed269e18d6f9fabb871
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
By adding all DXIO IOAPIC with the same resource index, the IVRS code
can always pick that resource which simplifies the code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I10345e2337dcb709c2c1a8e57a1b7dd9c04adb9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
|
|
Instead of adding the new PCI IDs of the XHCI controllers in every new
chip generation to the pci_xhci driver, bind the driver to the internal
PCI devices of the XHCI controllers via the device ops statement in the
chipset devicetree. The PCI device function of the XHCI2 controller in
Mendocino can be either a dummy device or the XHCI controller, so the
device ops are attached to that device in the mainboard devicetree
instead. The Glinda code is right now just a copy of the Mendocino code,
so it'll change in the future, but for consistency the equivalent
changes to those in Mendocino are applied there too.
Since the device ops are now attached to the devices via the static
devicetree entry, also remove both the xhci_pci_driver struct and the
amd_pci_device_ids array from drivers/usb/pci_xhci/pci_xhci.c.
TEST=SSDT entries for the XHCI controllers are still generated on
Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9c455002c6d2aac576fe24eee0c31744b4507bb0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace the magic constants by using defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I16179a37b6ee19bc3b4862b7dcb3bbc4caf63f2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The
soc/amd/common/acpi/lpc.asl file which was included in the now removed
pci0.asl file now gets included in the correct scope in the soc.asl
file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia8f0f1619a71f4ab2051714a9d8c7eb200845390
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75592
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the new common AMD code that gets the usable non-fixed MMIO windows
from the data fabric MMIO decode registers and generate the PCI0 _CRS
ACPI code based on those regions. For a more detailed description see
the corresponding patch that changes the Picasso code to use this new
code. In contrast to the Picasso code, this change will drop the
unneeded _STA method inside the PCI0 scope which wasn't present in
Picasso's ACPI code before it got replaced by the SSDT that gets
generated by amd_pci_domain_fill_ssdt.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b14ee0682ae1f2212ab43977c076687706434ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75557
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This makes sure that the resource allocator won't use those ports for
anything else.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie42260902ee2b383dd5867ac813cae029f706f2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Move microcode load/unload to pre_mp_init and post_mp_init callbacks.
It allows to make sure that ucode is freed only if all APs updated
microcode.
BUG=b:278264488
TEST=Build and run with additional debug prints added
to confirm that data are correctly unmapped
Change-Id: I200d24df6157cc6d06bade34809faefea9f0090a
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:217968734
TEST=Build guybrush firmware
Change-Id: I93dfa50cd1116e0f6652186acb37fd43d638cf84
Signed-off-by: Konrad Adamczyk <konrada@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75491
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't set bit 2 of the return value of the _STA method in order for
Windows not to show a warning about an unknown device in the device
manager for this device.
TEST=The unknown device with device instance path ACPI\AMD0040\3
disappeared from the device manager in Windows 10 build 19045 on a
Mandolin board with a Picasso APU.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If005f06843956004c281fd70cf364171148cb9ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68962
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 396fb3db74db ("soc/amd/*/acpi/mmio.asl,sb_fch.asl: hide AAHB
device") didn't only change the visibility of the device, but also
changed the _STA method to a name. While this worked, the specification
says that _STA is supposed to be a method, so change it back to being a
method.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0932b2875aaf563a4dbd860bdd11a04272e3780
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75169
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit d6e0a90aa0bd574b28b6c9b4b46289bf46a208db.
Reason for revert: Not ready to land, blocked by ancestor CL
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic14e17db4aed2f998878920c66cdc16362920dcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75050
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP-M is normally memmapped and then decompressed. The SPI DMA
controller can actually read faster than mmap. So by reading the
contents into a buffer and then decompressing we reduce boot time.
It is interesting that FSP-M takes an additional 8ms to execute. I
suspect since we call it 50ms earlier it's having to wait for one of
its dependencies.
BUG=b:179699789
TEST=Boot guybrush and see 30ms reduction in boot time
| 970 - loading FSP-M | 0.316 | 0.997 Δ( 0.68, 0.05%) |
| 17 - starting LZ4 decompress (ignore for x86) | 0.026 | 13.874 Δ( 13.85, 0.96%) |
| 18 - finished LZ4 decompress (ignore for x86) | 64.361 | 0.337 Δ(-64.02, -4.43%) |
| 2 - before RAM initialization | 0.534 | 0.529 Δ( -0.01, -0.00%) |
| 950 - calling FspMemoryInit | 1.455 | 1.132 Δ( -0.32, -0.02%) |
| 951 - returning from FspMemoryInit | 207.695 | 216.537 Δ( 8.84, 0.61%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I850b1576501753a355e7b23745e04802a0560387
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Return 0xf from PCI0 _STA method so that bit 2 is set which indicates
that the device should be shown in the user interface. This ports commit
c259d7192806 ("soc/amd/stoney/acpi: Unhide PCI0 root device from OS")
forward from Stoneyridge to the newer AMD SoCs.
TEST=On Mandolin the PCI Express Root Complex now shows up in the device
manager on Windows 10 and when switching the view to 'devices by
connection', all PCI(e) devices are shown below it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4155556dc5df8f163fe06aa6719fadbb2684cc19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74949
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I forgot to remove these in commit 0fe36db154eb ("ACPI: Make FADT
entries for SMI architectural").
Change-Id: Ib1bc1dad6053ddb0454d4510917fd2bcf0901f35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74811
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For AMD, replace name RTC_ALT_CENTURY with RTC_CLK_ALTCENTURY
that points to same offset. Since the century field inside
RTC falls within the NVRAM space, and could interfere with
OPTION_TABLE, it is now guarded with config USE_PC_CMOS_ALTCENTURY.
There were no reference for the use of offset 0x48 for century.
Change-Id: I965a83dc8daaa02ad0935bdde5ca50110adb014a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74601
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I80aa71b813ab8e50801a66556d45ff66804ad349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74600
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
It is unused. The use of field irq is problematic as it should
appear relative to IOAPIC GSI bases in the devicetree.
Change-Id: I460fd5fde3a7fba5518ccfc153a266d097a95a39
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change IRQ #0 to GSI #2 override to positive edge trigger from
the bus ISA default (positive edge).
Change-Id: I2de941071fca6f7208646a065a271fbf47ac2696
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74354
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Platform needs to implement this to provide information about SCI IRQ
pin and polarity, to be used for filling in ACPI FADT and MADT entries.
Change-Id: Icea7e9ca4abf3997c01617d2f78f25036d85a52f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since it's an internal bus, it's PCIE_ABC_C_DEVFN and not
PCIE_GPP_C_DEVFN. This also makes it consistent with the rest of the
internal PCI buses.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ica8b666161c3cd3b0b4a29f8a4b0aff473b4d833
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
After the obsoletion of Processor() it is necessary to provide
_CST package to define P_LVLx IO addresses for C2/C3 transitions.
The latency values from _CST will always replace those in FADT.
Change-Id: I3230be719659fe9cdf9ed6ae73bc91b05093ab97
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Boards with SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID have
special handling for the time being.
Change of aopen/dxplplusu is coupled with sb/intel/i82801dx.
Change of emulation/qemu-i440fx is coupled with intel/i82371eb.
For asus/p2b, this adds MADT LAPIC entries, even though platform
has ACPI_NO_MADT selected. Even previously ACPI_NO_MADT creates
the MADT, including an entry for LAPIC address.
Change-Id: I1f8d7ee9891553742d73a92b55a87c04fa95a132
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use the newly introduced 'all_x86' make target to add the compilation
unit to all stages that run on the x86 cores, but not to verstage on
PSP.
TEST=Timeless builds for Mandolin without verstage on PSP and Guybrush
with verstage on PSP result in identical images with and without this
patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94de6de5a4c7723065a4eb1b7149f9933ef134a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74151
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The i2c.c compilation unit is added to all stages in all cases, so use
the all target instead of adding it to all stages separately. Also order
the all targets alphabetically.
TEST=Timeless build on Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie90380075a3c87d226cdcb0f41f7e94275eaaa42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option is valid for all SoCs
with Zen-based CPU cores including the family 1Ah, so remove the suffix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I58d29e69a44b7b97fa5cfeb0e461531b926f7480
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
