| Age | Commit message (Collapse) | Author |
|---|
|
DPTF Policy and temperature sensor values from thermal team.
BUG=b:236294162
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Iebcfb74c4bc719e6d8d8d9317435becd912eaf85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch enables display port configuration as per the Rex
schematics.
TEST=Able to dump FSP UPD to ensure the override is successful.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e81d037416e46e52cb72344425d6d8725dae192
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Pujjoflex support OZ711LV2LN SD card controller,
Select the Bayhub LV2 driver for OZ711LV2LN SD card.
BUG=b:215487382
TEST=Build FW and checking SD card work as expected in OS.
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I6759fde1eaf24599a1fdb364d6e78f4e4e12f311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Create RAM IDs for:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D2DS-026 WT:B 1 (0001)
MT62F2G32D4DS-026 WT:B 2 (0010)
BUG=b:240289148
TEST=emerge-rex coreboot
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Ib24e07bca363984db3484aa500f7d6ea4817e517
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I869c0879d09e00cf66882adb728c9ccb6ac57e03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66183
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch override `CnviBtCore` FSP UPD.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I90c9b360969aada0b0e031d62b48476fac5cee0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add CS42L42 support in device tree.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=Check cs42l42 driver can probe successfully in kernel.
cs42l42 i2c-10134242:00: Cirrus Logic CS42L42, Revision: B1
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I861f47c12f4cebb016a4cfbe225f97d34d55e233
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Remove the parameter and set I2C bus speed to fast. Will fill the
tuning value after real tuning.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Iba7fe4551959617ecfa49719c1124bf85d624c31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Create the gaelin variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:239514438
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_GAELIN
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Change-Id: I7f1ff8690c7c57f8960e004d0490d5cede8667f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Add weida touchscreen support for drawcia.
BRANCH=dedede
TEST=Build and verify that touchscreen works on drawcia.
Change-Id: Ic76f3529771c6eeeafef7ca50fc400065aac2211
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65471
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
set i2c address to 0x14 for Goodix touchscreen
BUG=b:239180430
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I11a2d9c684bc511b3942f88f74a2495e796bc3c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
When the dGPU is entering GCOFF, the link should first be placed into
L2/L3 as appropriate for the design, then when exiting, the link should
be placed back into L0. This patch fixes that oversight.
BUG=b:239719056
TEST=build
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia3bdfe5641216675e06ebe82ffe58bf8c049b26b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The EEs noticed this pin was misbehaving; it was accidentally set to a
low output, but should be open-drain (NC). This patch fixes that.
BUG=b:237837108
TEST=verified by EEs
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie76a951320c49b9fbc1f23b96f04c9f86ad44d42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
For some yet unknown reason, when this GPIO is locked, there is an
interrupt storm for IRQ #9 apparently caused by GPE 0x66. GPP_F14 is set
to GPE 0x64 on the ADL platform, so this doesn't quite make sense. This
patch removes the lock and fixes this IRQ storm, but the root cause is
not identified yet.
BUG=b:236997604
TEST=`grep ' 9:' /proc/interrupts` shows a reasonable value now
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3d1c66fac80a173798ae33e48b1776d9f4fb5eaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
After staring at lots of scope shots, the EE has determined that a few
modifications to the GCOFF sequence can be made:
- Remove delay between PERST# assertion and GPU_ALLRAILS_PG deassertion
- Remove delay after ramping down FBVDD
This patch implements these minor changes.
BUG=b:240199017
TEST=verified by EE
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7d492b3e65a231bc5f64fe9c3add60b5e72eb072
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
After some debugging, it has been determined that the ASPM L0s substate
is functional, but there is still some problem with ASPM L1 substates,
so this patch updates ASPM status for the dGPU from disabled to L0s
only.
BUG=b:240390998
TEST=tested with nvidia tools
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I584bdbf26eda20246034263446492bf4daf5f3b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Generate SPD id for hynix H54G68CYRBX248
BUG=b:239899929
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I96babe340678ca9b82b06d3193b93a7676f23fef
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Generate SPD id for Hynix H54G68CYRBX248
BUG=b:239888704
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I9412b988bcdb0c744e016f3add6dacda8185d6db
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
GPP_F0 to GPP_F4 is for CNVi and should be NF1.
GPP_F5 is for CNVi CLK_REQ, and should be NF3 CRF_XTAL_CLKREQ.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=CNVi wifi can get probed in kernel.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ice3fde3a457f6f5c058c0a7d3ca2e63775bda96c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
This patch adds a new variant called Pazquel360 \
that is identical to Pazquel for now.
BUG=b:239987191
TEST=make
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I0a9ca4a59fb44256d0d8fcdbdf2a7db533c84412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
This adds the initial gpio configuration for the rex initial variant.
BUG=b:238165977
TEST=Boots and no errors on simics
Change-Id: I55ab31c7943e22df9cec8db4a9f0c3ab6f065ae1
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65952
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
ChromeOS connection manager (shill) already
has support for dock MAC address passthrough, therefore remove the
code to pass a dock's MAC address in ACPI.
BUG=b:235045188
TEST=build coreboot
Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com>
Change-Id: I78320a7c6b0fd5392e24b63bff234229a3f4b9bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66040
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow latest schematic 6/27 to update the DQ map.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I8d0de04a001cab53a245185707ebc9da7a501ec4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66122
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Add critical, passive policy, and pl values from thermal team.
BUG=b:239495499
TEST=Build and test on MB, system can boot to OS.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I8beb3b57ff56c6fe413bb0e3dd43d693aee08e36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66125
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Pujjo support WLAN device, enable PCIe port 4 for WLAN device
BUG=b:239899932
TEST=Build and boot on pujjo
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ic8b7240941cf87a4f27963d50fffe28875114a81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66073
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement mainboard_needs_pcie_init() for cherry as a callback for
mt8195 SoC to determine whether to initialize PCIe. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with NVMe
will fail to boot.
BUG=b:238850212
TEST=emerge-cherry coreboot
BRANCH=cherry
Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
1. Set Type-A USB3 port0/1 tx_de_emp to 0x2B to fix the USB3 Gen2 RX
signal integrity issue.
2. Disable unused USB port.
BUG=b:238230292
TEST=build FW and check Type-A USB3 port0/port1 RX pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I8356ca30a965e5774a1556c5cb81e1586c55496c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Joxer will have both eMMC and UFS SKUs, which require different
settings in the descriptor. So update the descriptor at run-time based
on fw_config.
By default, the descriptor is configured for UFS. This configuration
still boots fine on eMMC SKUs, it just might cause problems with S0ix.
This is a temporary workaround. It will be removed once we've
implemented a proper solution for configuring the descriptor differently
for different SKUs.
BUG=b:238234376
TEST=Make an identical change for nivviks. On both nivviks (eMMC) and
nirwen (UFS), check that it boots and that the logs show the descriptor
being configured as expected.
Change-Id: I14232eb773936f2ecd183687208d332136935601
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Set GPE route as
GPE0_DW0 -> GPP_A
GPE0_DW1 -> GPP_E
GPE0_DW2 -> GPP_F
BUG=b:224325352
TEST=Verified in emulator that there is no regression
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5e3e09cfc06d2556ea32cca23b3dae114a510498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch overrides `Lp5CccConfig` UPD as per the CCC mapping data
captured from the Rex schematics dated 07/16.
BUG=b:224325352
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia1d9e3665cff74a803e730c76f62773996efb3dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66049
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the required files to support VBOOT for when it is enabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I083107b21c23f42193fc88aa174ec22850f45bc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65705
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add pujjo new supported memory parts in mem_parts_used.txt.
Generate SPD id for this part.
Micron MT62F1G32D4DR-031 WT:B
BUG=b:239776504
TEST=Use part_id_gen to generate related settings
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I95eb194ecbd5d39f66eb566132e75af056899325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66039
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch reads various memory configuration GPIOs to fill in below
details:
1. variant_memory_sku()
2. variant_is_half_populated()
BUG=b:224325352
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23bad8c78523cb56008e6d67e7776e57e42fbeb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Lots of code from lenovo/haswell can be reused for lenovo/w541. Thus,
integrate it into lenovo/haswell and make it a variant.
Change-Id: If99d842cff777fe27ff63baabc447e69b9d0333c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
In preparation to CB:63514, make the INT15 support specific for the
T440p variant since the W541 doesn't support it currently.
Change-Id: I8dfcc061e1b8a831f75bf9a8035770cb678a85d4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66106
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I36091118d98f71dc4141aca4e45858a22d519a9b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds more GBB related configs. Select
`HAS_RECOVERY_MRC_CACHE` config.
Additionally, move VBOOT_LID_SWITCH config under VBOOT config.
TEST=Able to build the Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I28976200cbd70dc23f58868ee89c0ac700793be9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66007
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | A0
C0 | MLB DB | C1
| |
+----------------+
BUG=b:216490477
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I96202b9ac9586975e960d6577d279c995c67f34e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66031
Reviewed-by: Won Chung <wonchung@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I49185352002f6df2f9e9ab9c39d44cc9247b41b5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6b3fe8f4acbb5a2f9fca605e07854ebcc3f2a065
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I11f2ebb94b0e9a3e2c18c5b2071ccc3e03c16655
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Set the default value for MAX_CPUS in the SoC config and drop it from
the mainboards where it is set to those values.
Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add two memory parts and generate the associated DRAM part ID.
1) Hynix H9JCNNNBK3MLYR-N6E
2) Hynix H58G56AK6BX069
BUG=b:228415394
TEST=none
Change-Id: I0f5ca291e02e209032e2533f4b2d4241b5e62e42
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Use fw_config Bit 0 and Bit 1 to control:
Bit 0 = 0 --> enable WFC
Bit 0 = 1 --> disable WFC
Bit 1 = 0 --> enable pen garage wake
Bit 1 = 1 --> disable pen garage wake
BUG=b:238045498
TEST=emerge-nissa coreboot chromeos-bootimage
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I85bc4753bfd16fd460286aa2b3bb5f3341049f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Remove the sections that coreboot doesn't need to know about.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ide6c0d44f1f9ad9b962d2b8e14ac91e87f5ca031
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65453
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserve bits 15 and 16 in the fw_config to be used to specify WFC
population status.
Possible values for field WFC bits include:
option WFC_ABSENT 0
option_WFC_MIPI_OVTI5675 1
option WFC_MIPI_OVTI8856 2
BUG=b:239613517
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot' and make sure it compiles successfully.
Change-Id: If797b79f0d094816eeb3df7bfded06e92e4e6a32
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add TPM device for Rex.
Device details:
I2C Controller/Bus = 4
I2C Slave Address = 0x50
GPE = GPE0_DW1_03/GPP_E03
BUG=b:224325352
TEST=Verified in emulator that there is no regression
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ifa3a5b503a203e3900049f27a54025156e22a285
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66014
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 58f68fb0cb8e9824256a115d1ebdc840c281e987.
Reason for revert: ODM thermal team request that change IA/GT TDC
current back to 20A.
BUG=b:237230877
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I6a5cfdc18afb6fe43a3d630e5fa3d77c19640fc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.corp-partner.google.com>
Reviewed-by: Vinay Kumar <vinay.kumar@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Enables the EC_GOOGLE_CHROMEEC_BOARDID feature so we can read
board_id() on rex.
TEST=Verified builds succeed and code is linked
Change-Id: Id202019519fc4a05c80374bc97663e59fdca3d76
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66018
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Geralt reference design has both eMMC and SD card interfaces, so we
configure both in mainboard_init() in ramstage.
TEST=boot to kernel using emmc successfully.
BUG=b:236331724
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com>
Change-Id: I200a065ab96584d824153480e594e19baae97f9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65976
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Control regulator more easily with regulator interface.
TEST=measure 3.0V in VMCH and VMC.
BUG=b:236331724
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We plan to make 3 firmwares which differ only by Kconfig options and
can share a common variant directory.
ghost4adl: Board with an ADL chip.
ghost4es: Board near identical but has RPL-ES chip.
ghost: Will have final RPL silicon.
Since they will only differ by Kconfig options and Intel binary blobs,
let's not duplicate the variant directory but instead share it in
common.
BUG=b:239456576
BRANCH=firmware-brya-14505.B
TEST="make menuconfig", verify layout of board selection
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I94f2048bbe6675a807f8eba986a1ded0a4167733
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Follow the LED modification request in ADL_Moli_SC_MB_2022_0601.pdf and
set the customized_leds to 0x0482 based on 7.4 Customizable LED Configuration in "REALTEK+RTL8111K-CG+SPEC+0116" for RTL8111K in moli.
BUG=b:218985167
TEST=emerge-brask coreboot and check RTL8111K LED behaviour
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Ia154d15ecf14b32a4d589abf27b9573693339a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65958
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserve bits 15 and 16 in the fw_config to be used to specify WFC
population status.
Possible values for field WFC bits include:
option WFC_ABSENT 0
option_WFC_MIPI_OVTI5675 1
option WFC_MIPI_OVTI8856 2
BUG=b:239613517
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot' and make sure it compiles successfully.
Change-Id: I23bdaf7feaff2e6a4979c3da789ab877e6ac3af2
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
While adequate for ChromeOS, 16MiB VRAM is insufficient for current
mainline Linux and Windows amdgpu drivers to operate properly. Under
Linux, the driver fails to allocate a framebuffer and causes multiple
kernel panics. Under Windows, the driver fails to load due to
insufficient resources available. Revert the VRAM allocation to the
previous amount of 32MiB.
This change reverts
commit 87dcd0061af4 ("mainboard/google/kahlee: Reduce VRAM to 16MB")
Test: build/boot Linux 5.17.x on google/liara, verify framebuffer
allocation succeeds and no kernel panic reported.
Change-Id: I1967a203fed80456a20af00943eba21bc1c0577b
Signed-off-by: Matt DeVillier (AMD) <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66022
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The full dGPU power-on sequence, when executed from ACPI, is taking
roughly 15ms or so, which puts it close to the maximum of 20ms required
from the Nvidia spec. Changing the polling period to 100 us instead of 1
ms drastically reduces the time required for this sequence, now taking
typically 7 ms or so. This gives a lot more margin during the power on
sequence.
BUG=b:238466724
TEST=Sequence verified by EE on a scope
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3ba676c5fac983a0c1ad1d60c3863d06ed33fa27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66020
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Zoglin is like Hoglin, but with a smaller flash size, which requires
us to create a new variant.
BUG=b:239851866
BRANCH=None
TEST=Make sure BOARD_GOOGLE_ZOGLIN builds
Change-Id: Id1401a052061dcfc1d1ee41b88ce4a11fd9f3d01
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Skolas baseboard needs to set BOARD_ROMSIZE_KB_32768, so this change
sets it.
BUG=b:239628052
BRANCH=firmware-brya-14505.B
TEST="emerge-brya coreboot" and verify that the following configs
are set as:
CONFIG_BOARD_ROMSIZE_KB_32768=y
CONFIG_COREBOOT_ROMSIZE_KB_32768=y
CONFIG_COREBOOT_ROMSIZE_KB=32768
CONFIG_ROM_SIZE=0x02000000
Change-Id: I0846b8e69c8b65e010eef9a8f4a88606197cd0c6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Because 0 and 1 are the only possible values,
1. Change input argument "enable" of mainboard_enable_regulator to bool.
2. Change return value of mainboard_regulator_is_enabled() to bool.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From comments of CB:65875, we replace *_vol to *_voltage.
s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/
s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I71cc69c74dd618f441140790af351095ead3f6f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65759
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Ti50 hasn't implemented version reading yet. To avoid the confusing
error message
Did not recognize Cr50 version format
enable TI50_FIRMWARE_VERSION_NOT_SUPPORTED to make clear that this
feature is not supported.
BUG=b:234533588
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I18dd4b5bc05c2af06627275968e49aba048ba05e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This patch moves the early GPIO programming from
`bootblock_mainboard_init` to `bootblock_mainboard_early_init`.
It will help to get the early debug prints as below.
TEST=Without this CL the initial report platform information
was missing as below:
[DEBUG] VBOOT: Loading verstage.
[DEBUG] FMAP: Found "FLASH" version 1.1 at 0x1c04000.
[DEBUG] FMAP: base = 0xfe000000 size = 0x2000000 #areas = 33
[DEBUG] FMAP: area COREBOOT found @ 1c09000 (4157440 bytes)
[INFO ] CBFS: mcache @0xfef84a00 built for 18 files, used 0x414
of 0x2000 bytes
[INFO ] CBFS: Found 'fallback/verstage' @0x24d240 size 0x133d0 in
mcache @0xfef84d50
With this CL the complete bootblock serial msg is coming.
[NOTE ] coreboot-.mtl.po.ww29.5 Fri Jul 15 21:47:36 UTC 2022
bootblock starting (log level: 8)...
[DEBUG] CPU: Genuine Intel(R) 0000 @
[DEBUG] CPU: ID a06a0, MeteorLake A0, ucode: f0270108
[DEBUG] CPU: AES supported, TXT supported, VT supported
[DEBUG] MCH: device id 7d14 (rev 00) is MeteorLake P
[DEBUG] PCH: device id 7e01 (rev 00) is MeteorLake SOC
[DEBUG] IGD: device id 7d55 (rev 00) is MeteorLake-P GT2
[DEBUG] VBOOT: Loading verstage.
[DEBUG] FMAP: Found "FLASH" version 1.1 at 0x1c04000.
[DEBUG] FMAP: base = 0xfe000000 size = 0x2000000 #areas = 33
[DEBUG] FMAP: area COREBOOT found @ 1c09000 (4157440 bytes)
[INFO ] CBFS: mcache @0xfef84a00 built for 18 files, used 0x414
of 0x2000 bytes
[INFO ] CBFS: Found 'fallback/verstage' @0x24d240 size 0x133d0
in mcache @0xfef84d50
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3e092cd749359e54fe518de21671275af4b03062
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65986
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The generic wifi driver currently contains a lot of intel specific
functionality that results in it not working properly on AMD platforms.
This commit updates the base device tree to use the generic PCIe driver
instead.
BUG=none
TEST=Ran on nipperkin device, dumped SSDT and checked wakeup sources
Change-Id: Iafbc68c1ae33ccc260889f0b39fc5fe8a59d7aca
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65990
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The generic wifi driver currently contains a lot of intel-specific
functionality that interferes with enabling wake-on-lan. This commit
changes the device tree to use the generic PCIe driver which better
supports this functionality.
BUG=b:237682766
TEST=Booted on skyrim device and verified that wake on LAN works
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I5d15d33fd0a152eb3bf2bfe78e802483a701e750
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65800
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust I2C speed for codec, TPM, touchpad.
BUG=b:237691531
TEST=Built and verified adjusted I2C speed < 400KHz
Change-Id: I203d137d61019235ddf38ef74607427db2a7e975
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Prepare platforms for linking romstage code in the bootblock.
Change-Id: Ic20799b4d6e3f62cd05791a2bd275000a12cc83c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Switch x86 uart output from EC to LPSS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I2756d139a72185ba6a5c6d1079d770ce33afdf71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65985
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:238571507
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: Ie596e5c4b72de84d16571043db4291bbd0825c78
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
|
|
Skyrim uses second SPI pads for ESPI. Switch to it initialize ESPI in
verstage.
BUG=b:217414563
TEST=Build Skyrim BIOS image. Ensure that ESPI init is successful in PSP
verstage.
Change-Id: I6e3462e95c50d256b6c159ae1d854dd69a538bb0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Now that the speed is limited to 5500 Mbps for all memory parts used in
Skyrim, regenerate the part IDs. Remove any custom generated part IDs
and the associated SPDs.
BUG=b:238074863
TEST=Build and boot to OS in Skyrim.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I6d8326208580a971e781887a7ec83355bb085c7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65709
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The agah EC code includes a driver to keep track of the current D Notify
level that the GPU should be at. When it changes, it will send a host
event to the ACPI FW, which will then pass that Notify on to the kernel
driver. This patch adds support for that feature, which is described in
the Nvidia Software Design Guide.
BUG=b:229405562
TEST=add Printf() calls to the ACPI, and work through the various
scenarios on the EC that will cause D Notify levels to change; this
will cause the Printfs() to show up in the kernel log.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I5cd8bd7d177ea10a165613ed0726a6d6fd86c226
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:236175568
TEST=Build and test on MB, system can boot to OS.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I779355dcc69eed08703bcb8bb943dcfeeb1fdea1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
For brya/skolas, I2C1 is cr50, and I2C3 is Touchscreen
BUG=None
BRANCH=firmware-brya-14505.B
TEST=None
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I4058e0f33b2bb6227a0af92941ed4e2eb56ba542
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This change adds memory part used by variant beadrix to
mem_part_used.txt and generates DRAM ID allocated to the part.
BUG=b:236750116
BRANCH=None
TEST=Run part_id_gen to generate SPD id
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I3f29609d9fe5143b0bfe4b78279d0780cd7e5097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch tries to simplify the baseboard/variant GPIO programming
starting with Google/Rex. The idea is to let each variant maintain
its own complete GPIO PAD configuration table instead of having a
back-and-forth call between baseboard and variants.
With this patch coreboot performing GPIO programming is now much
simpler where the common code block calls into respective variants
and gets the gpio table prior to the pad configuration.
BUG=b:238165977 (Simplify baseboard/variant GPIO programming starting
with Google/Rex)
TEST=Able to build and boot the Google/Rex board.
AP firmware log with DEBUG_GPIO kconfig lists the early GPIOs being
configured from the `rex0` variant.
gpio_padcfg [0xd3, 08] DW0 [0x44000300 : 0x40000400 : 0x40000400]
gpio_padcfg [0xd3, 08] DW1 [0x00000020 : 0x00000000 : 0x00000020]
gpio_padcfg [0xd3, 08] DW2 [0x00000000 : 0x00000000 : 0x00000000]
gpio_padcfg [0xd3, 08] DW3 [0x00000000 : 0x00000000 : 0x00000000]
gpio_padcfg [0xd3, 09] DW0 [0x44000300 : 0x40000400 : 0x40000400]
gpio_padcfg [0xd3, 09] DW1 [0x00000021 : 0x00000000 : 0x00000021]
gpio_padcfg [0xd3, 09] DW2 [0x00000000 : 0x00000000 : 0x00000000]
gpio_padcfg [0xd3, 09] DW3 [0x00000000 : 0x00000000 : 0x00000000]
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8ec5c6991ec90a3884464e7f15f33327bfe4839a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Set USB3 port2 tx_de_emp 0x2B by "11th Gen Intel Core Processors for
IoT Platforms EDS Addendum_rev1.6" then fix the USB3 port2 Gen2 RX
failed.
BUG=b:236661824
TEST=emerge-brask coreboot and check USB3 port2 RX pass
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I7a5add20f055a8d871c6b4f33734fb8a397cba76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65848
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows the mainboard code to change FSP-M parameters depending on
parameters that are only known at run time and not at build time.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3e0e196a5d861acd7635c59db44ecf1970b73ce2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add support for hardware watchdog event logging
BUG=b:221393157
TEST=Validated on qualcomm sc7280 development board by manually
triggering watchdog event and event was logged at next bootup.
Signed-off-by: Kshitiz Godara <quic_kgodara@quicinc.com>
Change-Id: I94971ab583f49c8a5ac232833215dbdad3a4d272
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65528
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id56310bd616cd19fee5dc934676006b2dc34b1ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65929
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I37ed13e1fa318ca0f8381f5b1b409bf80fa4da11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ifc915e2825724fdaac67d259e1af2079893492a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I490a7f0c9cb32ca1ea246c14b72852814553214f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use correct HID names instead of the CID names for the touchpad devices.
Drop the now unneeded UID for the gaze15 TP devices.
Tested on a gaze15 with a Synaptics device. Windows does not crash on
boot and the touchpad is still detected as an I2C HID device.
Change-Id: I5b6ab1a23ce667754d0c5757062385a721c5113f
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
1. Add wifi sar table for osiris
2. Set EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG
BUG=b:234951991
TEST=build FW and checked SAR table can load by WiFi driver.
Cq-Depend: chrome-internal:4871098
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I301dce3229a24dd72b12b84d9eb7606abe10cbba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Configure the dGPU power and reset pins in bootblock instead of
ramstage. This fixes a conflict with our downstream driver, which
configures these pins to enable dGPU power in romstage. Behavior remains
unchanged without the driver as the dGPU is left powered off.
Change-Id: Ica5ad5adc20fc2629d913b76a5a781fbd59a569d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The oryp5 has several issues with audio output after a reboot:
- The device is not in GNOME sound settings
- The device is in GNOME sound settings, but there is no audio output
- The speaker output is significantly louder than normal
Reset the audio codec to resolve these issues.
Tested on Pop!_OS 22.04 with Linux 5.17.15.
Change-Id: I42f642820bba82142ff370930f0a25e9d1025588
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Battery charging thresholds are a firmware implementation and not
dependent on any hardware. It is expected that all boards using System76
EC firmware will select this option, so enable it by default.
Leave it disabled on clevo/cml-u, which didn't have it selected.
Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
For brya, I2C1 is cr50, and I2C3 is Touchscreen
BUG=None
BRANCH=firmware-brya-14505.B
TEST=None
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Id564d5ede43e745c607ddfd851ff03557d76ddec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Pujjo only support RTL1019 amp device, remove MX98360A device setting
BUG=b:238716919
TEST=Build and boot on pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I92ba66e8656ea36511f88cf867f51ba95168592e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since ASPM is not verified as fully functional yet, and the board is
still in development, this patch disables ASPM for the dGPU.
BUG=b:236676400
TEST=boot to OS in agah, lspci -vvv shows ASPM is disabled
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I525eeb18c57d45fd55335b63a59262066afc9567
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
init overridetree.cb based on the latest schematic.
BUG=b:237628218
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I22778cc2582abdc2e62d98c6b049a0fa4dd467e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Update DDR4 SPDs to Eldrid to include the following:
DRAM Part Name ID to assign
H5AG36EXNDX019 0 (0000)
BUG=b:236739240
BRANCH=Volteer
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: I2c372fa40899aa750d335825cf3880bc52a612a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65819
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It turns out that there is no device connected to I2S2.
This patch clarifies the GPIO settings device association and remove
unnecessary configuration.
GPP_A8 -> default: GP-in ; set to NF1: SRCCLKREQ7#
GPP_A9 -> default: NF1: ESPI_CLK
GPP_A10 -> default: NF1: ESPI_RESET#
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I7a575f495d841fe0bf6fd86a84caeee064f6904b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Disable PCIe Advanced Error Reporting on the CPU root port to prevent
some SSDs from timing out on S0ix suspend. AER results in the drive not
being able to switch from D3 back to D0.
nvme 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Known to affect at least the following SSD models:
- ADATA XPG SX8200 Pro
- Samsung 970 EVO Plus (FW version: 2B7QCXE7)
Change-Id: I79da6b08ef1949f3bf1c6111aaa7e658bd29c0e2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64080
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow latest schematic to add EC_IN_RW_OD.
BUG=b:238786599
BRANCH=firmware-brya-14505.B
TEST=emerge-ghost coreboot
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I701a940992895b2058b8ddfc444a2e7b7b9531ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Add SSD power sequence and remove the redundant weak.
BUG=b:238786597
BRANCH=firmware-brya-14505.B
TEST=emerge-ghost coreboot
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I0c1ce311d54fb92b27b17f50beda813fe66ad118
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Add module MT62F1G32D2DS-026 WT:B and assign RAM code.
BUG=b:238674174
BRANCH=firmware-brya-14505.B
TEST=emerge-ghost coreboot
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I811e1bbb985efe4198928f30ff6396a5b4368856
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65796
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is an ongoing effort to deprecate VBOOT_VBNV_CMOS, and replace it
with VBOOT_VBNV_FLASH [1]. Since SOC_INTEL_BROADWELL doesn't support
flash writes in early stages (BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES),
drop vboot as well as ChromeOS support for all broadwell boards,
including auron, jecht and wtm2.
[1] https://issuetracker.google.com/issues/235293589
BUG=b:235293589
TEST=./util/abuild/abuild -t GOOGLE_GUADO -a
TEST=./util/abuild/abuild -t GOOGLE_BUDDY -a
Change-Id: I002ab0f5f281c098afba16ada3621f1539c66d6b
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Configure the I2C bus timing for all enabled I2C buses.
BUG=b:237751906
TEST=Verify the build for volmar board and measure the freq
is under 400KHz
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: Iffa128146f5d8bec6dd3d5c2d1e7efd96895dc6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65604
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
