summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens/mc_apl1/variants
AgeCommit message (Expand)Author
2024-04-11tree: Remove blank lines before '}' and after '{'Elyes Haouas
2024-02-18mb/samsung to mb/up: Add SPDX license headers to Kconfig filesMartin Roth
2024-01-31device/device.h: Rename busses for clarityArthur Heymans
2024-01-24mb/lenovo to mb/squared: Rename Makefiles from .inc to .mkMartin Roth
2023-09-02mb/siemens/mc_apl2: Set Full Reset Bit into Reset Control RegisterMario Scheithauer
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
2023-07-03mb/siemens/mc_apl1: Fix wrong register maskingMario Scheithauer
2023-07-03mb/siemens/mc_apl5: Correct the Tx signal from SATA port 0Mario Scheithauer
2023-07-03mb/siemens/mc_apl1: Rename macro 'TX_DWORD3' to 'TX_DWORD3_P1'Mario Scheithauer
2023-07-03mb/siemens/{mc_apl3,mc_apl5,mc_apl6}: Remove TX_DWORD3 macroMario Scheithauer
2023-06-19soc/intel/apollolake: Switch to snake case for DisableSataSalpSupportMario Scheithauer
2023-06-02soc/intel/apollolake: Switch to snake case for SataPortsEnableMario Scheithauer
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Use SSD type for SATA portsMario Scheithauer
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Limit SATA speed to Gen 2Mario Scheithauer
2023-05-11mb/siemens/mc_apl5: Set Full Reset Bit into Reset Control RegisterMario Scheithauer
2023-05-11mb/siemens/mc_apl: Correct multi-line comment style for all Siemens APL BoardsMario Scheithauer
2023-03-03drv/i2c/ptn3460: Add 'mainboard' prefix to mainboard-level callbacksJan Samek
2023-02-03soc/intel/apl: Move cpu cluster to chipset.cbArthur Heymans
2023-02-02drv/i2c/ptn3460: Use PTN_EDID_LEN instead of constantJan Samek
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
2023-01-27drivers/i2c/ptn3460: Use cb_err in mb_adjust_cfgJan Samek
2023-01-27mb/siemens/mc_apl1/var/mc_apl5: Enable early POSTJan Samek
2023-01-22mb/siemens/mc_apl1/var/mc_apl6: Enable early POSTJan Samek
2023-01-22mb/siemens/mc_apl1: Move POST logic to mainboard levelJan Samek
2023-01-20mb/siemens: Unify and clean lcd_panel.c coding styleJan Samek
2022-12-23mb/siemens/mc_apl{4,7}: Limit I2C bus speed to 100 kHz on bus 7Werner Zeh
2022-10-27mb/siemens/mc_apl2: Enable early POST through NC_FPGAJan Samek
2022-09-22mb/siemens/mc_apl7: Enable libgfxinit for the boardJan Samek
2022-09-22mb/siemens/mc_apl7/Kconfig: Enable PTN3460 early initJan Samek
2022-06-27mb/siemens/mc_apl7: Disable VBOOT and TPMUwe Poeche
2022-06-23mb/siemens/mc_apl1: Add new mainboard variant mc_apl7Uwe Poeche
2022-06-20soc/intel/apollolake: Hook Up SataPortEnable to devicetreeSean Rhodes
2022-05-18intel/common/block: Provide RAPL and min clock ratio switches in commonUwe Poeche
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
2022-03-07src: Make PCI ID define names shorterFelix Singer
2022-02-22mb/siemens/mc_apl2: Enable PCI device for I2C bus 0Werner Zeh
2022-02-12mb/siemens/mc_apl{2,4,5,6}: Enable recovery MRC cacheWerner Zeh
2022-02-01mb/siemens/{mc_apl1,...,mc_apl6}: Disable SATA ALPM supportMario Scheithauer
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
2021-07-23mb/siemens/mc_apl{1,2,3,5,6}: Use PCI_ALLOW_BUS_MASTER_ANY_DEVICEWerner Zeh
2021-07-21mb/siemens/mc_apl{1,2,3,5,6}: Set PCI bus master bit only if allowedWerner Zeh
2021-06-04mb/siemens/mc_apl2: Disable unused I2C controllersWerner Zeh
2021-06-04mb/siemens/mc_apl{1,2,3,5,6}: Provide I2C timings for 400 kHzWerner Zeh
2021-05-30mb/siemens/mc_apl{1,2,3,5,6}: Disable ACPI-support for RX6110Werner Zeh
2021-05-30mb/siemens/mc_apl1: Move gpio.c from baseboard to mc_apl1Mario Scheithauer
2021-05-30mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configurationMario Scheithauer
2021-05-02mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequencyWerner Zeh
2021-02-16mb/siemens/mc_apl1/variants/mc_apl2/mainboard.c: Clean includesElyes HAOUAS
2021-02-15src/mb: Remove unused <console/console.h>Elyes HAOUAS
2021-02-10mb/siemens/mc_apl2: Switch I2C bus for RX6110SAMario Scheithauer
2021-02-02mb/siemens/mc_apl1: do UART pad configuration at board-levelMichael Niewöhner
2021-01-20mb/siemens/{mc_apl1,...,mc_apl6}: Configure FSP-S UPDsMario Scheithauer
2021-01-15mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
2020-11-30mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev()Angel Pons
2020-11-23mb/siemens/mc_apl1: Use `pci_or_config16` functionAngel Pons
2020-10-05mb/siemens/mc_apl6: Enable eMMCMario Scheithauer
2020-09-19apollolake boards: Enable CSE in devicetreeSubrata Banik
2020-09-10mb/siemens/mc_apl2/gpio: Fix code styleMaxim Polyakov
2020-09-10mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPOMaxim Polyakov
2020-06-30src: Remove whitespaces before tabsElyes HAOUAS
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-04-04mainboard/siemens: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-31security/vboot: Decouple measured boot from verified bootBill XIE
2020-03-18mainboard/[^a-p]*: Remove copyright noticesPatrick Georgi
2019-11-12src/mainboard/siemens: Use PTN3460 chip driverUwe Poeche
2019-11-12mb/siemens/mc_apl6: Enable VT-d featureWerner Zeh
2019-11-11mb/siemens/mc_apl6: Add TPM to devicetreeWerner Zeh
2019-11-11mb/siemens/mc_apl6: Enable SDHCI and disable eMMC controllerWerner Zeh
2019-11-11mb/siemens/mc_apl6: Adjust clock lines used on PCIe-2-PCI bridgeWerner Zeh
2019-11-11mb/siemens/mc_apl6: Enable VBOOT per defaultWerner Zeh
2019-11-11mb/siemens/mc_apl6: Add new mainboard based on mc_apl3Werner Zeh
2019-10-18mb/siemens/mc_apl{3,5}: Remove __weak symbol from GPIO functionsWerner Zeh
2019-09-25mb/siemens/mc_apl{2,4,5}: Enable VBOOTWerner Zeh
2019-09-05mb/siemens/mc_apl5: Disable IGD if no EDID data availableMario Scheithauer
2019-07-18mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settingsMario Scheithauer
2019-07-18mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modesMario Scheithauer
2019-07-12mb/siemens/mc_apl3: Enable LPSS UART 1Mario Scheithauer
2019-07-11mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168Mario Scheithauer
2019-07-11mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed modeMario Scheithauer
2019-06-21siemens/mc_apl5: Change PTN interface settingsMario Scheithauer
2019-06-21siemens/mc_apl5: Enable TPM supportMario Scheithauer
2019-06-06siemens/mc_apl5: Add own GPIO tableMario Scheithauer
2019-05-29src/mainboard: Add missing 'include <types.h>'Elyes HAOUAS
2019-05-06mb/siemens/mc_apl2: Limit SD-Card speed to DDR50Werner Zeh
2019-04-15mb/siemens/mc_apl4: Remove usage of external RTCWerner Zeh
2019-04-15mb/siemens/mc_apl1: Enable HDA in devicetree for all mainboard variantsWerner Zeh
2019-04-08siemens/mc_apl5: Remove reduced clock rate for I2C0Mario Scheithauer
2019-04-04siemens/mc_apl4: Provide CLK on APL Pin PMU_SUSCLKUwe Poeche
2019-03-15mb/mc_apl1/variants/mc_apl5: Drop unused '#include <lib.h>'Elyes HAOUAS
2019-03-06mb/siemens/{mc_apl1,mc_tcu3}: Fix typo on "Display"Elyes HAOUAS
2019-03-04arch/io.h: Add missing includesKyösti Mälkki
2019-02-13siemens/mc_apl4: Enable HW SPI TPM on mainboard mc_apl4Uwe Poeche
2019-02-13siemens/mc_apl2: Remove double entry from devicetreeMario Scheithauer
2019-02-05mb/siemens/mc_apl1: Enable VTD for mc_apl2 and mc_apl5Werner Zeh
2019-01-30siemens/mc_apl2: Change SERIRQ modeMario Scheithauer
2019-01-30siemens/mc_apl2: Correct whitespace of devicetreeMario Scheithauer
2019-01-30siemens/mc_apl2: Activate TPM supportMario Scheithauer
2019-01-16siemens/mc_apl4: Change UART_FOR_CONSOLE indexMario Scheithauer
2018-12-17siemens/mc_apl4: Enable RTC RX6110SA on this mainboardUwe Poeche
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 05:33:26 +0000