summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
AgeCommit message (Collapse)Author
2021-07-08mb/intel/tglrvp: Update Power Limit2 minimum valueSumeet Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on tglrvp system Change-Id: I6bbbfa8e43a241df721b91425294983c1d561f2c Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-05mb/intel/adlrvp_m: Remove ASL code and enable dynamic SSDT creation for ↵Varshit B Pandya
camera ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I39f82dc9eb91496d80479ae3f59ca5e03402a599 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/intel/adlrvp: Remove ASL code and enable dynamic SSDT creation for camera ↵Varshit B Pandya
ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Compared SSDT with this patch against DSDT without this patch, they are same Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I08834bbcf80dc46737de07f69a2402ed6bf93d4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/intel/adlrvp: Update the FIVR configurationsV Sowmya
This patch sets the optimized FIVR configuration for adlrvp cutomized based on the pnp measurements to achieve the better power savings in sleep states. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 states. * Update the supported voltage states. * Set the ICC max to 500mA for v1p05 and vnn. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I83e6910502d5cf9d4c26fa581272f59ac483ae19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-06-30soc/intel/elkhartlake: Enable PCH GBELean Sheng Tan
Enable PCH GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Use EHL own GBE ACPI instead of common code version due to different B:D.F from the usual GBE 3. Add kconfig PMC_EPOC to use the PMC XTAL read function Due to EHL GBE comes with time sensitive networking (TSN) capability integrated, EHL FSP is using 'PchTsn' instead of the usual 'PchLan' naming convention across the board. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I6b0108e892064e804693a34e360034ae7dbee68f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-30ec/google: Use EC_HOST_EVENT_NONERob Barnes
google_chromeec_get_event returns 0 for no event. Return EC_HOST_EVENT_NONE=0 to improve readability. BUG=b:184074997 TEST=Build and boot guybrush without error Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Ic08ed9ccdd7c0023d0fe8b641fcf60dca495a242 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-28mb/intel/adlrvp_m: Enable TCSS USB ports device pathBernardo Perez Priego
This provide a more consistent mechanism to enable corresponding USB TCSS port. BUG=b:182960979 TEST=Boot device, Type C port should operate correctly. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Iadc0df2e6e19a5afacbb7db1ae0bc7546dbcdc1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55772 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-24soc/intel/alderlake: Update mainboard_memory_init_params() argumentSubrata Banik
This patch updates mainboard_memory_init_params() function argument from FSPM_UPD to FSP_M_CONFIG. Ideally mainboard_memory_init_params() function don't need to override anything other than FSP_M_CONFIG UPDs hence passing config block alone rather passing entire FSP-M UPD structure. Change-Id: I238870478a1427918abf888d71ba9c9fa80d3427 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-23mb/intel/sm: Skip FSP to program UART0Subrata Banik
Set "SerialIoUartMode" for UART0 as PchSerialIoSkipInit Change-Id: Idc7da7bf38634c04b0f4acd4c7c2ea9fa88545e5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55207 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-22mb/intel/adlrvp: Update Mainboard part number and VendorMeera Ravindranath
dmidecode output should match with the CrOS kernel updated string. TEST=dmidecode grep "Manufacturer" = Intel Corporation dmidecode grep "Product name" = Alder Lake Client Platform Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I7cce423de624e7056e88b52a1443c554fd9123bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/51408 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18mb/intel/ehlcrb: Change default romsize and remove chromeos.fmdLean Sheng Tan
Change the default rom size to 32MB and remove chromeos.fmd because Chrome OS is not supported on EHL for now. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I49d9404eb901087037b5423a4a503c5271e14138 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55554 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/intel/adlrvp_m: Remove DP_HPD 1 & 2 definition from devicetreeBernardo Perez Priego
Due to latest corresponding UPD filling implementation, this is not required. This patch fixed the brokenness caused by Commit hash b10afbd2e2a8326fb21dc726a6c2bd53b06eb010. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I49e434f7bbafcb148e82202697e87c3e4268d7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-17mb/intel/adlrvp_m: Configure DP_HPD as PAD_NC and disable DdiPortHpdBernardo Perez Priego
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1), this causes redundancy with legacy HPD interruption. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=None TEST=Boot to kernel and verified no kernel HPD pins assertion message. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I80ef40a1aca19cd6ad56219175d2fd40890a393d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sanrio Alvares <sanrio.alvares@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-06-16broadwell boards: Use Haswell hostbridge.aslAngel Pons
Use hostbridge.asl from Haswell instead of Broadwell. Both files are equivalent. Then, drop the now-unused hostbridge.asl from Broadwell. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I87d51727b75a9c59e2f5f3ba8d48c575ce93c78c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16soc/intel/alderlake/romstage: Update display UPDs based on InternalGfxSubrata Banik
Disable all display related UPDs if IGD is not enabled as FSP don't need to perform display port initialization while IGD itself is disabled else assign UPDs based on devicetree config. TEST=Dump FSP-M display related UPDs with IGD enable and disable to ensure patch integrity. Change-Id: I0479904141dfc5e707679109aa18b7ef4264cf96 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14soc/intel/broadwell/pch: Replace ACPI device NVSAngel Pons
The same functionality can be provided through a runtime-generated SSDT. The remaining parts of device NVS are removed in a follow-up. Since the SSDTs are only loaded after the DSDT (if loaded at all), using SSDT-provided objects outside method bodies is not possible: the objects are not yet in OSPM's ACPI namespace, which causes in ACPI errors. Owing to this, the operation regions used by the _PS0 and _PS3 methods need to be moved into the SSDT, as they depend on the SSDT-provided BAR1 values. Tested on out-of-tree Compal LA-A992P, generated SSDT disassembles with no errors and contains expected values. Linux does not complain either. Change-Id: I89fb658fbb10a8769ebea2e6535c45cd7c212d06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/intel/adlrvp: Add board id for MR DDR5 SKUDeepti Deshatty
Add support for Maple Ridge DDR5 SKU with boardid 0x16 TEST=Verified build for ADL-P Chrome RVP Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: I9f0e9072f5866b60fb8463bb90f61915c78568db Reviewed-on: https://review.coreboot.org/c/coreboot/+/52760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2021-06-14mb/*/mptable.c: Use smp_write_pci_intsrc()Kyösti Mälkki
Split parameter '(devfn << 2) | intx' to 'devfn, intx'. Formatted with 'spatch --max-width 96' Change-Id: I17a6b3919b6e55aaa7ca2873ca713b36ebe7d3a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55285 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-14mb/*/mptable.c: Replace magic constantsKyösti Mälkki
Read I/O APIC ID and version from hardware registers. With coccinelle below, and minor fixups. @ r1 @ expression E1, E2, E3, E4; typedef u8; @@ -smp_write_ioapic(E1, E2, E3, E4); +u8 ioapic_id = smp_write_ioapic_from_hw(E1, E4); @ r2 @ expression E1, E2, E3, E4; @@ -mptable_add_isa_interrupts(E1, E2, E3, E4) +mptable_add_isa_interrupts(E1, E2, ioapic_id, E4) @ r3 @ expression E1, E2, E3, E4, E5, E6, E7; @@ -smp_write_pci_intsrc(E1, E2, E3, E4, E5, E6, E7) +smp_write_pci_intsrc(E1, E2, E3, E4, E5, ioapic_id, E7) @ r4 @ symbol mp_INT; expression E1, E3, E4, E5, E6, E7; @@ -smp_write_intsrc(E1, mp_INT, E3, E4, E5, E6, E7) +smp_write_intsrc(E1, mp_INT, E3, E4, E5, ioapic_id, E7) Change-Id: I20799f0c09cf0292661e1f3cb93373b2c68b7314 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-11cpu/x86/lapic: Replace LOCAL_APIC_ADDR referencesKyösti Mälkki
Note that there are assumptions about LAPIC MMIO location in both AMD and Intel sources in coreboot proper. Change-Id: I2c668f5f9b93d170351c00d77d003c230900e0b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55194 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/intel/tigerlake: Move MAX_CPUS to KconfigAndy Pont
Most of the Kconfig files for Intel SOC devices define the MAX_CPUS value within src/soc/intel/*/Kconfig. Move the definition there for Tiger Lake and remove from the mainboard Kconfig files. Signed-off-by: Andy Pont <andy.pont@sdcsystems.com> Change-Id: If145b9eb5d99821f4ce513118e4417d05f821ef5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-07soc/intel/adl: Add SKU specific power limits supportSumeet Pawnikar
Power limits (PL1 and PL2) depend on the specific SKU of the CPU. By expanding the SoC chip config power_limits_config member to an array indexed by ADL_*_POWER_LIMITS_*_CORE macros, the appropriate power limits are applied. Using this the correct set of power limits are being selected from the array based on system agent PCI ID. Based on this, chipset.cb file contains the set of power limits being used by varieties of ADL boards. These power limit values are as per document 619501. BUG=None BRANCH=None TEST=Built and verified the following console output on below boards On adlrvp (482): CPU PL1 = 28 Watts CPU PL2 = 64 Watts On adlrvp (682): CPU PL1 = 45 Watts CPU PL2 = 115 Watts On brya (282): CPU PL1 = 15 Watts CPU PL2 = 55 Watts Change-Id: Ic1676e2b4d611cdc85e770f131d5b6d5ecd180be Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
2021-06-07sb/intel/bd82x6x: Drop P_LVLx support in FADTAngel Pons
IO MWAIT redirection is not enabled, and C-states are reported using the _CST ACPI object, which overrides the P_LVLx values. Change-Id: I737bd58bcda3e7c5f6591e4c2309530ff035e2c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-07bd82x6x boards: Drop redundant `c2_latency`Angel Pons
If unspecified, chipset code already uses 101, and 0x65 == 101. Change-Id: I524ca492fa577003df23017756f74a455582132f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-05mb/intel/sm: Use device aliasesSubrata Banik
Use the device aliases provided by alderlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all shadowmountain board variants. TEST=Dump devicetree device enable list without and with this CL, no difference observed. Change-Id: I2b769d653ad8ad8ff069a0787d00ff33ead5c912 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-05mb/intel/adlrvp: Use device aliasesSubrata Banik
Use the device aliases provided by alderlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all different adlrvp boards. TEST=Dump devicetree device enable list without and with this CL, no difference observed. Change-Id: Ib9e82d953416c076588974f3167d00ae96f01bb5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55205 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-05mb/intel/{adlrvp, sm}: Remove ADL-S devices from ADL-P/M devicetree.cbSubrata Banik
Change-Id: I095394d9a79506346b8464c850d03cbd8ce2b812 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55221 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S storage related configsLean Sheng Tan
Further add initial Silicon UPD storage settings: - SATA - SD card - eMMC Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Id4145fcf156756a610b8a9a705d4ab99fe7b0bf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD RP & USB related configsLean Sheng Tan
Further add initial Silicon UPD settings for: - PCIe root ports - USB Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I60afb78a7997b8465dd6318f3abee28f95a65100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55034 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD configs for graphic & chipsetLean Sheng Tan
Further add initial silicon UPD settings for: - graphics & display - chipset lockdown - PAVP - legacy timer - PCH master gating control - HECI This CL also enables HECI 1 in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I657f44f8506640c23049614b2db9d1837e6d44ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/54960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-01mb/intel/adlrvp_m: Enable LTR for PCIEBernardo Perez Priego
BUG=none TEST=Use command $ lspci -vv LTR+ is listed on DevCtl2 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: If65d08a46b9e7304fbe4b92b7f1e6d4e08c599e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54492 Reviewed-by: Ryan A Albazzaz <ryan.a.albazzaz@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01soc/intel/elkhartlake: Update FSP-S UPD LPSS related configsTan, Lean Sheng
Add Silicon upd settings for LPSS (GSPI/UART/I2C). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ib0c3cd1d37ff9892d09d6d86ac50e230549c7e53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-05-30mb/intel/adlrvp_m: add ec device entry to devicetreeBora Guvendik
TEST=Boot to OS and verify acpi tables. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I3c78ac44afa3515acef9ea2d59f22f95e6b45e90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54490 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Reviewed-by: John Zhao <john.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-30soc/intel/elkhartlake: Update FSP-M UPD related configsTan, Lean Sheng
Upload the FSP-M UPD configs. This CL also updated the chip.h and devicetree.cb with the relevant variables and configs. This CL also updated the GPIO related settings (PMC & SD card) in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If6321064b37535b390cf3dd7c41a719c598a0cd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-05-28mb/intel/adlrvp_m: Disable unused TBT ports from device treeBernardo Perez Priego
These PCIe and DMA ports are not available for adlrvp_m. BUG=none TEST=Boot device Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ic568c692fbb82fb3fc70c0cafc2328f8fa2cd74d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-28mb/intel/ehlcrb: Upload EHL CRB GPIO configsTan, Lean Sheng
Initial upload of the GPIO configs for EHL CRB. This CL also includes the UART GPIO configs in early GPIO table. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ied4cbb34149b0b837597c0fc17dc5956f3ca409e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-05-18mb/intel/shadowmountain: Update mainboard propertiesJohn Zhao
This changes updates mainboard properties by adding DFP number and power_gpio for each DFP. BUG=b:186521258 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I29480bf77f7df9890bef64a5f9f02074a34dc131 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mb/intel/shadowmountain: Remove power_gpio from baseboardJohn Zhao
Along with upstream kernel for Retimer firmware update, coreboot defines power control for each DFP respectively under host router. This change removes the power_gpio from the baseboard. Individual DFPx power_gpio will be added once the dependent definition is complete. BUG=b:186521258 TEST=Build image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I819d2900afabbfdb2713fa8eee35d3c90cb904fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/54290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mainboard: Use decimal for `device lapic 0x0 on`Angel Pons
Most boards use `device lapic 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device domain 0x0 on`Angel Pons
Most boards use `device domain 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I6e2f0a19d57cfe6fc4e4ac4d14310133ad6b01d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device cpu_cluster 0x0 on`Angel Pons
Most boards use `device cpu_cluster 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I083c8f8e9b38ddcc217dc8bf17ae3c9473ba77e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18soc/intel/alderlake: mb/intel/sm: Add tcss codeDeepti Deshatty
Enable FSP 'MultiPhaseSilicon' init to execute tcss configure during silicon init. Type-c aux lines DC bias changes are propagated from tigerlake platform. TEST=Verified superspeed pendrive detection on coldboot. Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: Ifce6abb0fce20e408931b904426131a42a5a4a36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mb/intel/adlrvp: Disable EC sync for adlrvp_ext_ecMaulik V Vaghela
Since we have TPM disabled on ADLRVP, if we enable EC sync, it keeps rebooting with hash error. Change-Id: I62a4fceb83dc6b20f699b4662e8f421aadafdee5 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-05-12mb/intel/adlrvp_m: Program CPU PCIE RP GPIOs in early GPIOBora Guvendik
We need to configure CPU PCIE root port related gpios in early boot block stage for CPU root ports to work due to the dependency on FSP-M PCIe configuration. Since we're removing this programming from FSP, coreboot needs to take care of programming this GPIOs. Also we need to enable virtual wire messaging for native gpios for CPU PCIE root ports. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I27c898943471d834bd82e3c7e8b36cceb12de099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52865 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12mb/intel/adlrvp: Fill CmdMirror and DqDqsRetraining for ADLRVPMaulik V Vaghela
ADL-M LP4 RVP has command mirror enabled and we need to fill correct value of this UPD to pass the MRC. Also, Value of TxDqDqsRetraining is set to 1 by default and we need to disable it for only ADL-M LP5 RVP. BUG=None BRANCH=None TEST=UPD values has been pass correctly and MRC passes on LP4/LP5 board Change-Id: I3e16b9a3d3e6a92dacba9d38782df408596ed5e1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-11mb/intel/dg41wv/devicetree.cb: Fix up whitespaceAngel Pons
Remove a blank line and correct the indentation of another line. Change-Id: Id66f0a847720713c1d3445ac70a9e075228dfe88 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54017 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07skylake DT/HALO mainboards: Drop `SaGv` settingAngel Pons
SaGv is only supported on ULT/ULX hardware. Change-Id: I25001e97cce3193629e7fa7573bf9b352362d59b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-07mb/intel/adlrvp: Program CPU PCIE RP GPIOs in early GPIOMaulik V Vaghela
We need to configure CPU PCIE root port related gpios in early boot block stage for CPU root ports to work. Since we're removing this programming from FSP, coreboot needs to take care of programming this GPIOs. Also we need to enable virtual wire messaging for native gpios for CPU PCIE root ports. Change-Id: Ieda6b6c31ce5bd5e84e4efe544bfc659283ce6f1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52270 Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06mb/intel/adlrvp_m: Disable Type-C xDCIBernardo Perez Priego
Disabling this pci 0d.1 device since it is not required. TEST= Boot to OS. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Iccdf38111e3961ba887829abfa4146a9b37df9be Reviewed-on: https://review.coreboot.org/c/coreboot/+/52744 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05mb/intel/adlrvp: Enable support for Chrome OS mode switchesAnil Kumar
Branch=none Test=build and boot ADL-M RVP. Test recovery mode using servo command dut-control power_state:rec Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I771f0ef14b1c273f9d1af22c96de0eabd08e9a8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52614 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05nb/intel: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. Change-Id: Ic92ecf8068f327a893d20924685ce571752d379f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52787 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05mb/intel/shadowmountain: Enable early EC Software SyncUsha P
BUG=None TEST=Build and boot to OS on shadowmountain. Ensure that the EC Software Sync is complete. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I8648db685d9c63ed1f2b3e599ca951d6648b7baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/52416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-05-03mb/intel/adlrvp: Increase RO/RW region size in chromeos.fmdMaulik V Vaghela
While building adlrvp board with chromeos.fmd and adding all chromeos related artifacts, RO region is running out of space. Also, we need to increase RW region size to accommodate all binaries and artifacts. Aligning chromeos.fmd with Brya will help in solving this issue, thus aligning chromeos.fmd with Brya. BUG=b:184997582 BRANCH=NONE TEST=Code compiles fine and able to boot adlrvp platform Change-Id: I644e2e5ba06d2b816d413a7cc9f5f248d8a6fee8 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52732 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-29mb/intel/adlrvp: Configure TCSS, BT and WiFi related GPIOsFrancois Toguo
This CL configures TCSS, BT and WiFi related GPIOs based on schematics. BUG=None TEST= BT, WIFI and TCSS functionalities validated with this change. Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Change-Id: Ie0e665275c281fcbad0d02ceb723cea433637711 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50516 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-28mb/intel/adlrvp_m: Add UART0 GPIO config for ADL-M RVPAnil Kumar
This patch adds UART0 config in early GPIO table Branch=None Test=Build coreboot and boot on ADLRVP-M board. Check UART logs Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Ic0cc955a02936b74f44fed55a9f4b8054646681a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52201 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-23mb/intel/shadowmountain: Enable HECI1 interfaceSridhar Siricilla
The patch enables HECI1 interface Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia2638559bcaac78d024e35abd09534b61eacb843 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2021-04-23mb/intel/shadowmountain: Enable RTD3 for SD cardRizwan Qureshi
Enable the PCIe RTD3 driver for the PCIe attached SD card interface and specify the srcclk pin and reset GPIO. TEST=Tested on shadowmountain platform to ensure the system can enter the S0ix state and suspend/resume is stable Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: Ibeb99bea48d72b019cb2adcf38926c3ed39f7b84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52134 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-23mb/intel/adlrvp: Enable DPTF functionality for adlrvp boardSumeet R Pawnikar
Enable DPTF functionality for Alder Lake based adlrvp board BRANCH=None BUG=None TEST=Built and tested on adlrvp board Change-Id: I319bb0ddb9cd9bbe48c8ee09c2742a78da230b7b Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-23mb/intel/adlrvp_m: Enable bluetoothBora Guvendik
Enable bluetooth on ADL-M RVPi. Remove 10.2 pci entry since it is not used anymore. BUG=none TEST=Check lsusb to see if BT enumerated. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I39e77dbb619235129ed894d20f24956242de3aa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-22soc/intel/alderlake: Add enum for HDA audio configurationSugnan Prabhu S
This change adds an enum to configure the audio related UPDs used for configuring the audio over HDMI/DP and rename a variable for better readability. TEST=On shadowmountain audio sound cards are detected and listed by the Linux kernel. Audio playback and capture is working fine. Change-Id: I2834d6f4ce1651a609c5563af375f6e365d931fa Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-22soc/intel/alderlake and mb: Drop PchHdaAudioLink*Enable UPDs from chip.hFurquan Shaikh
FSP uses PchHdaAudioLink{Hda|Dmic|Ssp|Sndw}Enable UPDs to configure GPIO pads for audio. However, mainboard is expected to perform all GPIO configration in coreboot and hence these UPDs must be set to 0. There is no need to expose these UPDs in chip.h and provide mainboard an option to set these in devicetree. This change drops PchHdaAudioLink{Hda|Dmic|Ssp|Sndw}Enable UPDs from chip.h and the corresponding devicetree in mainboards. Currently, shadowmountain already set these UPDs to 0, whereas adlrvp set these to 1. But all the ADL boards are correctly configuring the GPIO pads for audio, so this change should not impact audio for any of these boards. BUG=b:183482000 TEST=adlrvp and shadowmountain build successfully. Change-Id: I90e4eb5cc242a789800f4c9f8c71e9d8c8a2becf Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52559 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-21soc/intel/alderlake: Drop unused `PrmrrSize` from devicetreeAngel Pons
The `PrmrrSize` FSP-M UPD is set using `get_valid_prmrr_size()`. As the devicetree option's value is not used anywhere, drop it. Change-Id: Ib6fb77b03a4648adbd8b23c160cfba94d142a2d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-21mb/intel/shadowmountain: Disable GSPI1 interface connected to FPSSridhar Siricilla
The patch disables GSPI1 interface connected to fingerprint scanner since no plans to enable FPS on Shadowmountain. TEST=Verified on Shadowmountain Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ic693a8c9699d7d1cceef9ca26305cc34498022d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-04-16mb/intel/adlrvp: Enable ALC711 over SNDW0Sridhar Siricilla
The patch enables ALC711 over SNDW0. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I43891b94728c8f2d644e14da11946fea3e4515aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/50022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-04-13dptf: Move platform-specific information to `struct dptf_platform_info`Tim Wawrzynczak
DPTF HIDs are different per-platform going forward, so refactor these into SoC-specific structures which the DPTF driver can query at runtime for platform-specific information. Change-Id: I6307f9d28f4274b851323ad69180ff4ae35053da Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-04-12mb/*: drop LPC generic range for port 80Michael Niewöhner
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have to be set up as generic range. Drop the entries from the devicetrees. Change-Id: I8a54d3c35a321a2d57bd846662f7339eff53e5a8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-10mb/intel/shadowmountain: Enable Bluetooth config in the devicetreeSridhar Siricilla
The patch enables Bluetooth config in the devicetree and removes non-existent Bluetooth PCI interface. TEST=Verified by checking Garfield Peak controller's PID:VID(8087:0033) in the lsusb ouput. Output of lsusb: Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. USB 10/100/1000 LAN Bus 004 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. 4-Port USB 3.0 Hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 003: ID 0781:55a9 SanDisk Corp. Dual Drive Bus 003 Device 004: ID 413c:2113 Dell Computer Corp. Dell KB216 Wired Keyboard Bus 003 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. 4-Port USB 2.0 Hub Bus 003 Device 005: ID 8087:0033 Intel Corp. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I7a54d344ef1b0418bee56e7308977a61604b954a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52182 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-09mb/intel/adlrvp: Enable HECI1 communicationSridhar Siricilla
The patch enables HECI1 interface to allow OS applications to communicate with CSE. BUG=None TEST=Build and boot ADLRVP. Run lspci and check pcie device (00:16.0) Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I34ff842481bdfc7933a76555ff0fd70f4fbbb9a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-04-09mb/{google/jecht,intel/wtm2}: Remove NOOP APM finalize callArthur Heymans
The intel/soc/broadwell smihandler has no handler for this APM call. Change-Id: I2bcec7cce00d433a197a9e2fb01434a2998e1452 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52167 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-06mb/intel/adlrvp: Update iDisp Link UPD settingsFrancois Toguo
This changes updates the iDisp-Link T-mode to 8T required for ADL-M. The update is made because the HW on ADL now supports 8T mode. BUG=None TEST= build and boot ADL-M RVP and verify HDMI/DP audio playback. Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Change-Id: I9d0bf7dc76348f7e184e8496f042badc30bf3211 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51353 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-06mb/intel/adlrvp: Enable Camera in ADL-M RVPVarshit Pandya
1. Configure Power Enable, Reset and Clock GPIO for both camera 2. Use same ASL code as ADL-P RVP Configure RST, PWR_EN and IMGCLKOUT signals for WFC and UFC TEST=Build, Boot and Verify streaming in both Camera Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I70636eaa8d9bdf23d649e811b3ff4f33b1bc604e Reviewed-on: https://review.coreboot.org/c/coreboot/+/50265 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-06mb/intel/shadowmountain: Add Cr50 supportAamir Bohra
This patch includes changes to add Cr50 support over GSPI0. BUG=b:175579964 TEST=Verify TPM init is done and boots to kernel Change-Id: I33f7427d1675190f65acf14679be93546e6db69a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51086 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mb/intel/adlrvp: Update VBT filenamesTim Wawrzynczak
These files were just renamed to put `adlrvp` in between `vbt` and the memory technology type. Change-Id: Icefbac462d0ec9c660541e9cf44686d6dcf82dfd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52032 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp_m: Enable ADL-M RVP LP5 memory configurationMaulik V Vaghela
List of changes: 1. Add correct board Id for ADL-M LP5 configuration 2. Add spd hex files for LP5 Micron part 3. Update memory.c file with correct Dq-dqs and byte mapping for LP5 BUG=None BRANCH=None TEST=Build is successful for ADL-M RVP Change-Id: I0bbd3f5b56bf7fbe918cc599d32a01dcae896ddd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/adlrvp_m: Enable ADL_M RVP LP4 memory configurationMaulik V Vaghela
List of changes: 1. Add board Ids for ADL-M LP4 configuration 2. Add spd hex files for LP4 configuration 3. Update memory.c file with correct Dq-dqs and byte mapping for LP4 BUG=None BRANCH=None TEST=Build and boot is successful for ADL M LP4 RVP Change-Id: Id817faee3fff2a8a911ebda35774dfb6ddc5524b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Configure GPIOs for ADLRVP-MVarshit Pandya
List of changes: 1. Add separate file for ADL-M GPIOs 2. Configure GPIOs as per the schematics of ADL-M RVP TEST=Able to build ADL-M Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I03a532f69f42db723b976a0f7b0acf6f4b98e354 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/shadowwmountain: Enable CSE Lite SKU for shadowmountainSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST=Verified build for Shadowmountain Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2ebf4da1b8c1df2e9c43b6e3bb688a9f8db652d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51496 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Enable CSE Lite SKUSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST= Built and booted on ADL-P LP4 RVP Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia92c7b71c69a23104ace9fc53fd39f01120fa751 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51567 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-27mb/intel/dcp847ske: Drop useless MCHBAR writesAngel Pons
There's no need to write the GDCRTRAININGRESULT registers after raminit. Change-Id: If604920fe7a3bee96f72f8aff5e96f0e25548f18 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50534 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-27mb/intel/adlrvp: Allow GPIO PM override to disable dynamic GPIO PMSubrata Banik
This patch allows overriding GPIO PM miscconfig register for each GPIO community to avoid dynamic clock gating. TEST=Dump GPIO Community MISCCFG register to ensure all Bit [7:0] are set to '0'. Change-Id: I9aca9cb0641e2731c028ea5ed76c563da3400b74 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-26mb/intel/shadowmountain: Disable the unused CPU PCIe RPV Sowmya
This patch disables the unsued CPU PCIe RP for shadowmountain. TEST= Boot shadowmountain and verify the device is disabled. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Ide2badb06178fca8ff5cf51d8573a14635e190cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/51772 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-26mb/intel/adlrvp: Remove static VBT stitchingMaulik V Vaghela
Currently, we used to stitch extra VBT files to ADLRVP build using Makefile. With enablement of emerge build, we should be able to integrate more than 1 VBT binaries using ebuild. This removing these lines to avoid compilation issues in emerge builds BUG=None BRANCH=None TEST=Check if compilation passes on emerge build. Stitched additional VBT files using emerge and checked that coreboot picks up correct VBT. Change-Id: I69f1cc6c07415515ff85180fdd7cc5de11b4d805 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-03-26soc/intel/alderlake: Add provision to override Rcomp settingsSubrata Banik
Add function to allow overriding the RcompResistor and RcompTarget UPDs from mainboard if required. Mainboard users can pass required rcomp from memory.c file. Refactor ddr_config structure to take out rcomp related variable outside for all memory type to override if required. BUG=b:182772421 TEST=Able to override the default RcompResistor and RcompTarget values. Change-Id: Ie8528bbf0517728534d47f9adaabfc9a2c469609 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-26soc/intel/alderlake: Align RcompResistor definition as per MRCSubrata Banik
List of changes: 1. Alder Lake MRC is expecting a RcompResistor value of word width. Reference RCOMP resistors on motherboard are ~ 100 Ohms but coreboot is passing an array of RcompResistor which is not completely in use. Note: Rcomp resistor value represents rcomp resistor attached to the DDR_COMP pins on the SoC. 2. Also, remove usage of '&' with memcpy the required value into RcompTarget array. 3. Also, update RcompResistor value for ADLRVP. BUG=b:183341229 TEST=Enable FSP debug log to verify the override value for RcompResistor is reflecting correctly. Change-Id: I69c7cec55b65036fc039c33374a3fd363ef7004e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-25nb/intel/haswell: Decouple mainboard USB config from MRCAngel Pons
With this change, only raminit.c uses pei_data.h definitions. With MRC cornered, making it optional is just a matter of writing a replacement. USB config definitions will be moved to Lynx Point code in a follow-up. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4bc405213e9b0828d9ced18677335533c7dd381d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-24mb/intel/adlrvp: Enable CnviBtAudioOffloadUsha P
This change enables CnviBtAudioOffload. FSP is invoked to configure BT over USB and BT I2S pins for cAVS connection. BUG=None TEST=Verified BT offload working on ADL RVP Signed-off-by: Usha P <usha.p@intel.corp-partner.google.com> Change-Id: I1185a6c2295bae7d469be4da86502506adbeb8cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/51032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-03-23nb/intel/haswell: Use unshifted SPD addresses in mainboardsAngel Pons
It's common to use the raw, unshifted I2C address in coreboot. Adapt mainboards accordingly and perform the shift in MRC glue code. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4e4978772744ea27f4c5a88def60a8ded66520e1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51458 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22lynxpoint/broadwell: Rename LP GPIO config globalAngel Pons
Do not use the same name as the non-LP GPIO config. This allows checking at build-time that a mainboard uses the correct GPIO config format. Without this commit, there are no build-time errors when using the wrong format of GPIO config, but there would be undefined behavior at runtime. Tested by trying to build asrock/b85m_pro4 and hp/folio_9480m after toggling the `INTEL_LYNXPOINT_LP` Kconfig option (and trimming down the USB config arrays for asrock/b85m_pro4). In both cases, building failed because the necessary GPIO config global is not defined, as expected. Change-Id: Ib06507ef8179da22bdb27593daf972e788051f3a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51661 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-20mainboard/: Register chipset_lockdown on xeon_sp mainboardsMarc Jones
Set chipset_lockdown in devicetree for recommended security settings. Change-Id: Ie27450dd32463243b1456932a1d39d40afa81da1 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51388 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19nb/intel/haswell: Consolidate memory-down SPD handlingAngel Pons
Mainboards do not need to know about `pei_data` to tell northbridge code where to find the SPD data. Adjust `mb_get_spd_map` to take a pointer to a struct instead of an array, and update all the mainboards accordingly. Currently, the only board with memory-down in the tree is google/slippy. Mainboard code now obtains the SPD index in `mb_get_spd_map` and adjusts the channel population accordingly. Then, northbridge code reads the SPD file and uses the index that was read in `mb_get_spd_map`, and copies it to channel 0 slot 0 unconditionally. MRC only uses the first position of the `spd_data` array, and ignores the other positions. In coreboot code, `setup_sdram_meminfo` uses the data of each SPD index, so `copy_spd` has to account for this. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: Ibaed5c6de9853db6abd08f53bbfda8800d207c3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51448 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-17spd_bin: Replace get_spd_cbfs_rdev() with spd_cbfs_map()Julius Werner
In pursuit of the goal of eliminating the proliferation of raw region devices to represent CBFS files outside of the CBFS core code, this patch removes the get_spd_cbfs_rdev() API and instead replaces it with spd_cbfs_map() which will find and map the SPD file in one go and return a pointer to the relevant section. (This makes it impossible to unmap the mapping again, which all but one of the users didn't bother to do anyway since the API is only used on platforms with memory-mapped flash. Presumably this will stay that way in the future so this is not something worth worrying about.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iec7571bec809f2f0712e7a97b4c853b8b40702d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-17mb/intel/shadowmountain: Update HDMI audio mode to 8TSugnan Prabhu S
This patch sets the HDMI audio mode to 8T as required by the latest FSP version v2081_02 TEST: HDMI audio codecs detection is failing without this change. Change-Id: Ie5a825da7d199c9ee61e64d8f4ee7dec28fdaacd Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-03-17mb/intel/shadowmountain: Disable xDCISugnan Prabhu S
This patch disables the xDCI which is causing PC8 to PC10 state transitions during sleep. TEST: Confirmed that the transition is happening with this change. Change-Id: I9bbf7b52c36954600d7e66f9b03fad39b8881a5f Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2021-03-15mb/intel/tglrvp: Enable RTD3 for WWANBora Guvendik
Enable the PCIe RTD3 driver for WWAN device attached to PCIe Root Port 4 and provide the reset GPIO / src clk pin. BUG=none TEST=Boot to OS, verify the link is in L2 state during S0ix. Change-Id: I669e02bd02e3af878648a6f3cf4fbb4d06c9857f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2021-03-15mb/intel/tglrvp/variants: Disable non-existing BT PCI interface and add BT flagCliff Huang
Remove the CNVi BT PCI config and add BT flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS to make sure BT is enumerated. Change-Id: I8de5615235f24e6169bf67dbbadb92e69437bc4e Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50899 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/intel/adlrvp: Disable non-existing BT PCI interface and add BT flagCliff Huang
Remove the CNVi Bt PCI config and add Bt flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS. Change-Id: I17c3e2761f91fb397d140d1954b6d4b451c4c603 Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-15mb/intel/adlrvp_p: Support VBT for LP4, LP5 and DDR5 SKUsMeera Ravindranath
Add support to pick the right vbt from cbfs according to SKU-ID. Change-Id: I8795cc67d87429eddb31328f1e2a90c346b53533 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-15mb/intel/shadowmountain: Add ACPI entry for BT reset GPIOAamir Bohra
Change-Id: Ia9e57f34eceaf1925dc5e3ffa6370ba0241447a4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2021-03-15mb/intel/adlrvp: Select ADL_ENABLE_USB4_PCIE_RESOURCESTim Wawrzynczak
This change select the Kconfig to pre-allocate the Intel-recommended bus and memory resources per-PCIe TBT root port for the adlrvp mainboard. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic56ebab02e50a466662a07d122d8f40eaf16b54b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51461 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12soc/intel/braswell: Factor out common `acpi_fill_madt`Angel Pons
Function is identical for all mainboards, so factor it out. Change-Id: Ibe08fa7ae19bfc238d09158309f0a9fdb31ad21c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50028 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 14:15:11 +0000