summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer/variants
AgeCommit message (Expand)Author
2020-12-08mb/google/volteer/variant/lindar: Add PMC.MUX.CONx device configuration and d...Kevin Chang
2020-12-08mb/google/volteer/var/voxel: Update DPTF parametersSheng-Liang Pan
2020-12-08mb/google/volteer: Update I2C5 bus freq and devicetree.Stanley Wu
2020-12-08mb/google/volteer: ACPI nodes for volteer2_ti50Jes Klinke
2020-12-08mb/google/volteer/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
2020-12-07mb/google/volteer/var/elemi: use devtree aliases for PMC MUX connectorsWisley Chen
2020-12-05mb/google/volteer/var/voema: Add MIPI camera supportDavid Wu
2020-12-05mb/google/volteer: Create copano variantFrankChu
2020-12-05mb/google/volteer/variant/lindar: Correct SD card reader power sequenceKevin Chang
2020-12-02mb/google/volteer: Add fw_config entries for boot deviceDuncan Laurie
2020-12-02mb/google/volteer: Add additional SD cards to device listDuncan Laurie
2020-11-30mb/google/volteer: Create drobit variantFrank Chu
2020-11-30mb/google/volteer/variants/delbin: Enhance I2C5 bus freq closer 400 kHzFrank Chu
2020-11-30mb/google/volteer/variant/copano: Add memory part supportNick Vaccaro
2020-11-29mb/google/volteer: eldrid: use devtree aliases for PMC MUX connectorsScott Chao
2020-11-25mb/google/volteer: Update Eldrid USB2 port settings in overridetreeNick Chen
2020-11-25mb/google/volteer/variant/lindar: change speaker smart amplifier to ALC1011Stanley Wu
2020-11-25mb/google/volteer/var/elemi: Add H5ANAG6NCJR-XNCWisley Chen
2020-11-24mb/google/volteer/var/voxel: Update DPTF parametersSheng-Liang Pan
2020-11-24mb/google/volteer: fw_config: Add setting for new sd readersZhuohao Lee
2020-11-22mb/google/volteer: Remove unused devices for terrador and todorDavid Wu
2020-11-22mb/google/volteer/var/voema: Update gpio and devicetree settingsDavid Wu
2020-11-20mb/google/volteer/var/elemi: Update gpioWisley Chen
2020-11-20mb/google/volteer/var/elemi: enable Genesys Logic GL9763EWisley Chen
2020-11-20mb/google/volteer: Add keyboard layout to fw_configDuncan Laurie
2020-11-20mb/google/volteer/variants: Set TCSS PCIe RP0 to hidden by defaultDuncan Laurie
2020-11-20mb/google/volteer: Enable RTD3 for SD cardDuncan Laurie
2020-11-20mb/google/volteer/variants: Enable RTD3 for the NVMe deviceDuncan Laurie
2020-11-19mb/google/volteer/var/terrador: Correct enable_gpio to GPP_F16David Wu
2020-11-18mb/google/volteer: Add new Audio option to FW_CONFIGWisley Chen
2020-11-17mb/google/volteer/variants/volteer2: Tune Volteer2 I2C2 bus frequencyJohnny Li
2020-11-16volteer/variants/eldrid: Goodix touch panel power-on sequence tuningNick Chen
2020-11-16mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
2020-11-13mb/google/volteer/variant/lindar: Update devicetree settingsStanley Wu
2020-11-13mb/google/volteer: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
2020-11-09mb/google/volteer/eldrid: Describe the privacy_gpioRicardo Ribalda
2020-11-09mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
2020-11-09mb/google/volteer/variants/volteer2: Tune I2C3 camera bus freq 400 kHzJohnny Li
2020-11-06mb/google/volteer/var/elemi: Update gpio and devicetreeWisley Chen
2020-11-04mb/google/volteer/var/voema: Update dq/dqs mappingsDavid Wu
2020-11-02mb/google/volteer/var/volteer2: Merge `common_soc_config`Angel Pons
2020-11-02mb/google/volteer/variants: Describe USB ports in devicetreeDuncan Laurie
2020-11-02mb/google/volteer: Add DB_USB3_NO_C option for DB_USB fieldDuncan Laurie
2020-11-02mb/google/volteer: New variant for Volteer reworked with DauntlessJes Klinke
2020-11-02mb/google/volteer/var/terrador: Enable SaGv supportDavid Wu
2020-11-02mb/google/volteer/variants/delbin: Update DPTF parameters for delbinFrank Chu
2020-11-02volteer: Create voema variantDavid Wu
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
2020-11-02mb/google/volteer: Disable DPTF active policy for terrador and todorDavid Wu
2020-10-30mb/google/volteer: Remove RIPTO support for cameraDaniel Kang
2020-10-30mb/google/volteer: Separate power resource for VCMDaniel Kang
2020-10-30tigerlake mainboards: switch to devtree aliases for PMC MUX connectorsTim Wawrzynczak
2020-10-30mb/google/volteer/variants/volteer2: I2C5 trackpad bus freq 400 kHzJohnny Li
2020-10-29mb/google/volteer: correct memory id for elemiWisley Chen
2020-10-26mb/google/volteer: Add a DPTF policy for EldridNick Chen
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-26mb/google/volteer/var/voxel: enable GPP_D17 for FCAM_PWRSheng-Liang Pan
2020-10-26mb/google/volteer: Use PCIE_CLK_NOTUSED in place of 0xFFDavid Wu
2020-10-26mb/google/volteer/var/terrador: Disable SRCCLKREQ1#David Wu
2020-10-26mb/google/volteer/var/voxel: Disable SRCCLKREQ1#Sheng-Liang Pan
2020-10-23mb/google/volteer: Add settings for noise mitgationShaunak Saha
2020-10-20mb/google/volteer/var/terrador: Configure board specific DPTF parametersDavid Wu
2020-10-20mb/google/volteer/variants/lillipup: add generic SPDsNick Vaccaro
2020-10-19mb/google/volteer: Enable USB4 retimer driverDuncan Laurie
2020-10-19mb/google/volteer/elemi: Add memory.c for DDR4Wisley Chen
2020-10-14mb/google/volteer: Disable HybridStorageMode for volteer baseboardShaunak Saha
2020-10-13volteer: Create elemi variantWisley Chen
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-10-12mb/google/volteer/var/voxel: disable DdiPortHpdSheng-Liang Pan
2020-10-12mb/google/volteer: Fix typo in baseboard power limits Sumeet R Pawnikar
2020-10-12mb/google/volteer/variants/eldrid: Add SPD for H5ANAG6NCJR-XNCNick Vaccaro
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
2020-10-09mb/google/volteer/variants/volteer2: Update DPTF parametersTerry Chen
2020-09-30mb/google/volteer: Update SLP_Sx assertion widths and PwrCycDurJamie Ryu
2020-09-29mb/google/volteer: Change default camera power GPIO to 0Daniel Kang
2020-09-29mb/google/volteer/halvor: Update settings for audio functionFrank Wu
2020-09-29mb/google/volteer: Add "i2c-allow-low-power-probe" property forDaniel Kang
2020-09-28mb/google/volteer/variants/eldrid: Configure GPP_S4 and GPP_S5nick_xr_chen
2020-09-28mb/google/volteer/var/terrador: Enable audio SMBIOS OEM stringKevin Cheng
2020-09-28mb/google/volteer: Improve Eldrid Port 1 USB2 Eye Diagramnick_xr_chen
2020-09-25mb/google/volteer: Wake on AC connect and disconnectAbe Levkoy
2020-09-25volteer: Create boldar variantRonak Kanabar
2020-09-24mb/google/volteer: Enable CnviBtAudioOffloadJohn Zhao
2020-09-24mb/google/volteer/var/voxel: Update gpio settings for EVTSheng-Liang Pan
2020-09-21volteer: set GSPI CS to deasserted by defaultCaveh Jalali
2020-09-21mb/google/volteer: Add firmware configuration for MAX98373_ALC5682I_I2S_UP4Frank Wu
2020-09-21mb/google/volteer: fw_config: Add fields for keyboard featuresDuncan Laurie
2020-09-18mb/google/volteer: Remove redundant GPIO decls in EldridTim Wawrzynczak
2020-09-17mb/google/volteer/variants/eldrid: Configure DP_HPD as PAD_NCnick_xr_chen
2020-09-14mb/google/delbin: Configure DP_HPD as PAD_NC and disable DdiPortHpdRavi Sarawadi
2020-09-14mb/google/volteer: Fix GPP_E12 definitionCaveh Jalali
2020-09-14mb/google/volteer/var/voxel: Update DPTF parameters and TCC offsetDavid Wu
2020-09-14mb/google/volteer: Refactor baseboard devicetreeTim Wawrzynczak
2020-09-11mb/google/volteer/variants/volteer2: route GPP_F14 via APICAlex Levin
2020-09-09mb/google/volteer/var/trondo: Add memory parts and generate DRAM IDsDavid Wu
2020-09-09mb/google/volteer/variants/eldrid: add memory.c for ddr4 supportnick_xr_chen
2020-09-08mainboard/google/volteer: Disable S0i3.4 if cr50 firmware is too oldJes Klinke
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
2020-09-03mb/google/volteer/variants/volteer: route GPP_F14 via APICAlex Levin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:36:06 +0000