summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rex
AgeCommit message (Collapse)Author
2023-11-01mb/google/rex/var/rex0: Toggle NVMe PWR pin to reset SSDWonkyu Kim
During warm reboot, NVMe is not detected with non-serial image sometimes while there is no issue with serial image. This change toggles NVMe PWR pin as soon as in early stage to make NVMe ready sooner. BUG=b:260547988 BRANCH=None TEST= Build rex0 and try warm reboot from OS console. Check if the platform with Micron SSD boots to OS again without an issue. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I2f34e3f49e7fc388198ff85c8e119cb3f242a60e Reviewed-on: https://review.coreboot.org/c/coreboot/+/71221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-11-01mb/google/rex: Avoid hang for pre-prod SoC by setting SAGV_POINTS_0_1_2Subrata Banik
Intel has identified an idle hang issue on pre-prod silicon that will not be fixed or root-caused. To avoid the issue, this commit sets SaGvWpMask to SAGV_POINTS_0_1_2 in the devicetree. Note: This change will affect system power. BUG=b:287170545 TEST=Able to idle for more than 5+ hours without any hang on google/screebo. Change-Id: Id0b8db0076d983d336c3bec6d6c33614c69964d1 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78794 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-31mb/google/rex/var/screebo: Disable FVMSubrata Banik
This patch disables FVM for IA and SA VRs as per the OEM requirement. BUG=b:307237761 TEST=Able to build and boot google/screebo. Change-Id: Icb0611331ac7090d11d646a5ad5201593a90aacb Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-31mb/google/rex/var/screebo: Set Baseline Power LimitSubrata Banik
This patch allows google/rex mainboard to choose between "Performance" (PL_PERFORMANCE) and "Baseline" (PL_BASELINE) power limits (PLs). This is important for platform to meet balance between power and performance. The OEM design google/screebo selects baseline power limit to maintain the balance performance in lower power. BUG=b:307237761 TEST=Able to build and boot google/screebo. w/o this patch: screebo4es-rev1 ~ # cbmem -c -1 | grep "CPU PL" [INFO ] CPU PL1 = 15 Watts [INFO ] CPU PL2 = 57 Watts [INFO ] CPU PL4 = 114 Watts w/ this patch: screebo4es-rev1 ~ # cbmem -c -1 | grep "CPU PL" [INFO ] CPU PL1 = 15 Watts [INFO ] CPU PL2 = 40 Watts [INFO ] CPU PL4 = 84 Watts Change-Id: I43debc5442ae9c01851652beba676ffc102ca27d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-28mb/google/rex: add dptf settings for 2+4 SOC SKUKane Chen
This patches privides settings based on 2+8 15w. BUG=b:306543967 TEST=boot on rex with 2+4 SOC and power limit settings are overridden correctly in variant_update_cpu_power_limits Change-Id: I0560e44ce8e0d91bb5fb9c7cc9ffe68ab050bf00 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78688 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-28mb/google/rex/var/rex0: Configure EN_WWAN_PWR GPIO based on CBIJeremy Compostella
GPP_B17 (aka. EN_WWAN_PWR) should be kept low when the device does not have a WWAN module. TEST=Power consumption drops to 0 in S0iX Change-Id: I95150c20c98b037a47827a7b83e4373c6e9070e3 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78684 Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-28mb/google/{rex, ovis}: Introduce devicetree.cb for pre-prod SoCSubrata Banik
This patch introduces a dedicated devicetree.cb file for platforms built with pre-production SoC. This will help to keep the SoC configuration separate for platforms with ESx and QSx silicons. For example, the SaGv WP configuration is different between pre-production (aka ESx) and production (aka QSx) silicon. BUG=b:306267652 TEST=Able to build and boot google/rex4es. Change-Id: I01b0abeeb25ce5a83882c56b30929228fcc6c95c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Mike Lee <mike5@huaqin.corp-partner.google.com>
2023-10-27mb/google/rex: Update FMD to support CBFS verificationAnil Kumar
This patch adds the required FMD changes to support the change in cse_lite 'commit Ie0266e50463926b8d377825 ("remove cbfs_unverified_area_map() API in cse_lite")' for CBFS verification. These blobs were kept separate originally to avoid hash loading and verification every time and hence save boot time. With the change in cse_lite the ME_RW_A/B blobs are now part of FW_MAIN_A/B and corresponding entries in FMD can be removed. BUG=b:284382452 TEST=Build CB image for google/rex board and test CSE FW update/downgrade with CONFIG_VBOOT_CBFS_INTEGRATION config enabled. Also confirm there is no increase in boot time with this change. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I56865a9e5c8b5f9e908e00e1a7e7e187d5d6a2f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-10-25mb/google/rex: Create deku variantEran Mitrani
BUG=b:305793886 TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku built without errors. Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I332e404e82a7980bb8ed1fb084fe957f526f81d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78393 Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-23mb/google/rex/var/karis: Modify TCC_offset to 10Tyler Wang
Follow thermal team request, modify tcc_offset from 20 to 10. BUG=b:306548525 TEST=Build and verified by thermal team Change-Id: I7537e103be4cd1196c934ca72dbd61e064aed371 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-10-23mb/google/rex: Use upstream driver properties for SX9324Ivy Jian
Use human readable properties as upstream driver support. BUG=b:297977526 TEST=Able to get sensor values changed w/wo a hand covering the device. before this CL , SSD.dsl of STH9324 Package (0x02) { "semtech,ph0-pin", Package (0x03) { Zero, Zero, Zero }, ... Package (0x02) { "semtech,ph23-resolution", Zero }, Package (0x02) { "semtech,startup-sensor", Zero }, .... after this CL , SSD.dsl of STH9324 Package (0x02) { "semtech,ph0-pin", Package (0x03) { One, 0x02, 0x02 }, ... Package (0x02) { " semtech,ph23-resolution", 0x0400 }, Package (0x02) { "semtech,startup-sensor", One }, Change-Id: Ie0d929228f4510f33b07d9c4cfdfcd2a9a437c27 Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78174 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
2023-10-20Revert "mb/google/rex: Enable sending EOP from payload"Matt DeVillier
This reverts commit 55b7dee2784e9fe80870c6c33ba91b98021df8b5. Reason for revert: accidentally submitted out of order / breaks tree Change-Id: Ic15d0e3688cd54f7d678998341263e7bd30e75f2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78525 Tested-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-10-20mb/google/rex: Enable sending EOP from payloadKapil Porwal
Enable sending EOP from payload BUG=b:279184514 TEST=Verify sending EOP from depthcharge on google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I5eda0a5c6d4c34cfcc2de898adde0b005d6edc1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74768 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20mb/google/rex/var/karis: Remove I2C2 "on" settingsTyler Wang
GPP_H04/GPP_H05 doesn't use for I2C usage, remove I2C2 "on" settings. BUG=b:294155897 TEST=Check ap firmware log, i2c2 is disabled Change-Id: I0124fd108fbbd87507d252e9caab4dfc16aceddb Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78339 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eran Mitrani <mitrani@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20mb/google/rex: Set frequency and gears for SaGv pointsBora Guvendik
Update SaGv gears and frequency values as per recommendation from power and performance team. This change doesn't cause negative impact on firmware boot time performance. BUG=b:274137879 TEST=Verified the settings on google/rex using debug FSP logs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ie8a81c05f25b1cdab1008d09c606d1debea6e6e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-20mb/google/rex/var/karis: Use 2 gpio for stylus detect/wakeTyler Wang
Use 2 gpio for stylus detect and wake function. GPP_E04 is the IRQ source, and GPP_E09 is the wake source. BUG=b:304680060 TEST=Build and test on karis, stylus detect function works Change-Id: I7a83326f76932c8e501e6369bb845fc7236291b4 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78336 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-18mb/google/rex: enable WIFI_SAR for all variantsYH Lin
Enabling support of WiFi SAR table for all rex variants by setting the option at baseboard level. BUG=b:290689824 TEST=emerge-rex coreboot Change-Id: I17709cb5d75b56c6c1f386ab527c5c8730011bed Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78308 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-10-18mb/google/rex/var/karis: sync CBI FW_CONFIG definitionsYH Lin
Sync'ing Karis' FW_CONFIG definitions stored in CBI, ``` _FW_MASKS = struct( DB_USB = 0x00000003, # bit1~bit0 STYLUS = 0x00000004, # bit2 AMP = 0x00000038, # bit5~bit3 FAN = 0x000000C0, # bit7~bit6 MIPI_CAM = 0x00000300, # bit9 ~ bit8 FP_MCU = 0x00000C00, # bit11 ~ bit10 KB_TYPE = 0x00001000, # bit12 WIFI_TYPE = 0x00002000, # bit13 ) _FW_CONFIGS = struct( DB_USB_UNKNOWN = hw_topo.make_fw_config(_FW_MASKS.DB_USB, 0), DB_USB4_ANX7452 = hw_topo.make_fw_config(_FW_MASKS.DB_USB, 1), STYLUS_ABSENT = hw_topo.make_fw_config(_FW_MASKS.STYLUS, 0), STYLUS_PRESENT = hw_topo.make_fw_config(_FW_MASKS.STYLUS, 1), AUDIO_ALC5650 = hw_topo.make_fw_config(_FW_MASKS.AMP, 0), FP_MCU_ABSENT = hw_topo.make_fw_config(_FW_MASKS.FP_MCU, 0), FP_MCU_NUVOTON = hw_topo.make_fw_config(_FW_MASKS.FP_MCU, 1), FP_MCU_ELAN = hw_topo.make_fw_config(_FW_MASKS.FP_MCU, 2), WIFI_TYPE_CNVI = hw_topo.make_fw_config(_FW_MASKS.WIFI_TYPE, 0), WIFI_TYPE_PCIE = hw_topo.make_fw_config(_FW_MASKS.WIFI_TYPE, 1), MIPI_UF_CAM_HI556 = hw_topo.make_fw_config(_FW_MASKS.MIPI_CAM, 0), ) ``` BUG=b:290689824 TEST=emerge-rex coreboot Change-Id: I1e4965c009edc595f24c04ac82d81aa0e723bbf3 Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78261 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-18mb/google/rex/var/karis: add hook for WiFi SAR tableYH Lin
WiFi SAR table for karis will be place into the CBFS later on and as a result adding the hook in coreboot to make use of the SAR table once the table is available. BUG=b:290689824 TEST=emerge-rex coreboot Change-Id: Ic989024ab9eb0fc439fc701c335a85986c4cfec5 Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78260 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-18mb/google/rex/var/karis: Add FAN field in fw_configTyler Wang
Update default fan settings(FAN_SETTING_1) in FAN field. Bit 6-7, FAN, 0 --> FAN_SETTING_1 BUG=b:290689824, b:294155897 TEST=Dump ssdt table and check fan settings is existed Change-Id: Id69ec67202b5d769cd3a9a68344a6d8913ebd78b Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-16mb/google/rex/var/rex: Configure cpu power limits by battery statusJamie Ryu
When battery level is below critical level or battery is not present, cpus need to run with a power optimized configuration to avoid platform instabilities. This will check the current battery status and configure cpu power limits properly. BUG=b:296952944 TEST=Build rex0 and check cpu power limits are configured with a performance efficient configuration and the platform boots to OS if battery level is above the critical level. And check cpu power limits are configured with a power optimized configuration and boots to OS without an issue if battery is not present or battery level is at or below critical level. Change-Id: I12fd40abda76c8e7522b06a5aee72665f32ddec8 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78322 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-13mb/google/rex/variant/rex0: HID over SPI - change frequency to 30MHZEran Mitrani
BUG=NONE TEST=Tested on Rex, touch over SPI works properly. Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: If339f7a010fa51bf73b8898a55643b5e921d93b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-10-13mb/google/rex/var/rex0: Update NVM configuration for WFCJamie Ryu
This updates NVM Configuration according to EEPROM BRCA016GWZ-W datasheet for rex World Facing Camera module - O9B13-NT01BA to enumerate Camera module properly. BUG=b:301226048 TEST=Build rex0 and check SSDT table is updated correctly. Check "cros-camera-tool modules list" lists up the modules properly. cros-camera-tool modules list: /sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-PRP0001:01/i2c-PRP0001:011/nvmem /sys/devices/pci0000:00/0000:00:19.1/i2c_designware.4/i2c-13/i2c-PRP0001:03/i2c-PRP0001:032/nvmem [ { "module_id": "KC6977", "sensor_id": "OV013b", "sysfs_name": "i2c-0/i2c-PRP0001:01" }, { "module_id": "CH3c6d", "sensor_id": "HN0556", "sysfs_name": "i2c-13/i2c-PRP0001:03" } ] Change-Id: I51bdf249549d3e03180e9d126a85e9dff91028db Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78211 Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-13Revert "mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hang"Wentao Qin
This reverts commit 5c35d30ffc7382af46b62044a5cf5326b1e57708. Reason for revert: Here we need to confirm whether the issue in mtl-staging-MTL.3323.92 has been improved in the QS sample in the factory build. BUG=b:287170545 TEST=Able to idle for more than 5+ hours without any hang. Change-Id: I4517bbbefe11d95623d7e16a5e4bba2dd6f408e1 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78320 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Mike Lee <mike5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-12mb/google/rex/var/karis: Fix touchscreen HID to ELAN9004Tyler Wang
Confirmed with vendor, Elan touchscreen HID should set to "ELAN9004". Correct Elan touchscreen HID to "ELAN9004" for karis. BUG=b:294155897 TEST=Dump the SSDT on karis and check the HID had been modified. Change-Id: I6ebb02540c894460388b9b9fe03f5c4031f8186d Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78266 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-11Revert "mb/google/rex/var/screebo: Enable GL9750 invert WP function"Kun Liu
This reverts commit ee4191852abf9b24f822468250c24edb993497c6. Reason for revert: In schematic a sdcard write protection pull-down resistor was added, so need to disable GL9750 invert WP function Change-Id: I00a8f43094d8b3674a4bbaeed24b96aab64b9b75 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78295 Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-11mb/google/rex/var/karis: Set touchscreen power/reset GPIOs correctlyTyler Wang
The tochscreen isn't powered on yet when the detection is done, it makes touchscren no function. Set touchscreen power and reset GPIOs correctly in romstage and ramstage to make the detect feature works. BUG=b:303130400 TEST=(1) emerge-rex coreboot (2) Test on karis, touchscreen function works Change-Id: I6c7815b81eb47fb41e58233fde512ac6b9c000a7 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78254 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-10mb/google/rex/var/screebo: Update DTT settings for thermal controlKun Liu
update DTT settings for thermal control, as follows: 1.Cancel TCPU trip point and fine tune other protection temperature on the Critical policy table 2.Fine tune EC/Bios protection temperature BUG=b:291217859 TEST=emerge-rex coreboot Change-Id: I0e2ff6eea9fed71ad7680c1fac4921984b87aca5 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78290 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-10mb/google/rex/var/rex0: update thermal settings to start fan earlierSumeet Pawnikar
Internal testing showed that CPU heatsink gets hot and temperature goes over 75C. In this situation, the fan does not even start to lower down CPU temperature. This is because of existing temperature thresholds of TSR0 and TSR1 sensors are set at 45C to start fan. With updated new settings based on tuning from thermal team, the fan starts early at 43C for TSR0 and TSR1 so the CPU temperature stays below 75C. BUG=b:302673874 TEST=Built and tested on google/rex board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I6580652d6165946e98ecf1b46ace3352cd34dcdf Reviewed-on: https://review.coreboot.org/c/coreboot/+/78279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-07mb/google/{rex,ovis}: Disable package C-state auto demotionSukumar Ghorai
Package C-state auto demotion feature allows hardware to determine lower C-state as per platform policy. Since platform sets performance policy to balanced from hardware, auto demotion can be disabled without performance impact. Also, disabling this feature results soc to enter below PC8 state and additional power savings ~30mW in Local-Video-Playback scenario. BUG=b:303546334 TEST=Local build successfully & Boot to OS successfully - Also check platform enter PC8 state in local video playback - before this change: # iotools rdmsr 0 0xE2 -> 0x0000000060008008 - After # iotools rdmsr 0 0xE2 -> 0x0000000000008008 Change-Id: Ia4cf4a7cb6bd5eaae26197b55f9385c078960d7b Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78250 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-04mb/google/rex: Configure ISH UART TX/RX as NCBernardo Perez Priego
This patch reverses ISH UART pin configuration to allow ISH to enter into suspend mode. This UART port is for debugging purposes. BUG=b:302612549 TEST=On Google/rex platform with ISH enabled, do suspend_stress_test This test must pass Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I8aba45420744a3990e1f9637c3b31ea2e0f78f87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78049 Reviewed-by: Tanu Malhotra <tanu.malhotra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-03mb/google/rex: Fix ISH I2C pad for suspendCliff Huang
During suspend, the ISH I2C transactions cannot go through because the GPIO pads remain the pervious value. The IO Standby State (IOSSTATE) needs to be changed to keep I2C bus active and functional during suspend. BUG=b:302612549 TEST=on Google/rex platform with ISH enabled, do suspend_stress_test and check that no i2c failure. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I9a2c902ed56461f3a535428db399c2050756f2da Reviewed-on: https://review.coreboot.org/c/coreboot/+/78179 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Li1 Feng <li1.feng@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-28mb/google/rex/var/ovis: Add DPTF configurationJakub Czapiga
Configure PL1 and PL2 are configured for powerformance. Based on values from Intel Meteor Lake UH Power Map document ID:640982 BUG=b:286834207 TEST=Build and boot google/ovis and check ACPI SSDT for DPTF entries Change-Id: Ia40884b3abd1417dea6ad291de4845762ee01966 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77623 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-26mb/google/rex/var/rex0: Configure I2C5 timingIvy Jian
Configure I2C5 timing in devicetree to ensure I2C devices meet timing requirement. BUG=b:300177424 TEST=Build and check I2C devices timing meet spec. | | I2C5-Before | I2C5-After | |-------------|-------------|------------| | FSMB(KHz) | 445.400 | 343.638 | | TLOW(us) | 1.543 | 2.068 | | THIGH(us) | 0.475 | 0.604 | | THD:STA(us) | 0.603 | 0.711 | | TSU:STA(us) | 0.612 | 0.611 | | TSU:STO(us) | 0.605 | 0.611 | | TBUF(us) | >1.914 | >2.044 | Change-Id: I3bb678b66d55c6bfaff76e3e5500a2a3bc3a2c61 Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78111 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-23mb/google/rex: Move selects from Kconfig.name to KconfigFelix Singer
Selects should be done in the Kconfig file instead of Kconfig.name and not mixed over both files. Change-Id: Id69ea99b452e4214fcc81335a5c961b4da3ce48b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-09-22mb/google/rex/var/rex0: Add entries for SAR Proximity SensorsSubrata Banik
This patch adds ACPI entries for SAR Proximity Sensors as below SAR1 Sensor: - SAR1_INT_L : GPP_E00 - I2C5 7-bit address 0x28 SAR2 Sensor:   - SAR2_INT_L : GPP_E08 - I2C 7-bit address 0x2c BUG=b:297977526 TEST=Able to build and boot google/rex. w/o this patch: Total 6 devices are listed below: > ls -lt /sys/bus/iio/devices/iio:device* /sys/bus/iio/devices/iio:device5 -> ../../../devices/LNXSYSTM:00/ LNXSYBUS:00/PNP0A08:00/device:07/ /sys/bus/iio/devices/iio:device0 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device2 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device4 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device1 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device3 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 w/ this patch: Total 8 devices are listed below: > ls -lt /sys/bus/iio/devices/iio:device* /sys/bus/iio/devices/iio:device6 -> ../../../devices/pci0000:00/ 0000:00:19.1/i2c_designware.4/i2c- /sys/bus/iio/devices/iio:device5 -> ../../../devices/LNXSYSTM:00/ LNXSYBUS:00/PNP0A08:00/device:07/ /sys/bus/iio/devices/iio:device7 -> ../../../devices/pci0000:00/ 0000:00:19.1/i2c_designware.4/i2c- /sys/bus/iio/devices/iio:device0 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device2 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device4 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device1 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 /sys/bus/iio/devices/iio:device3 -> ../../../devices/pci0000:00/ 0000:00:1f.0/PNP0C09:00/GOOG0004:0 Change-Id: I0a518d58915f9f4dbe58a45c4dc5875abbfda135 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78045 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-09-22mb/google/rex: Add new FMD for prod (QS) Meteor Lake siliconSubrata Banik
Intel Meteor Lake QS silicon provides better size optimized pre-x86 reset blobs. This patch creates a new flash layout (FMD) for QS to accommodate those optimizations, and renames the existing FMD for ES (pre-prod) silicon. Comparative analysis between QS and ES flash layout is here: For QS silicon: - SI_ALL reduced from 9MB to 8MB. - SI_BIOS increased by 1MB (from 23MB to 24MB) to fill in the 32MB SPI layout. - ME_RW_A/B reduce from ~4.5MB to 4MB. - Ensure RW-B slot is starting at 16MB boundary. - Unused space increased by 1MB. For ES silicon: - SI_ALL: 9MB - SI_BIOS: 23MB - ME_RWA/B: 4.5MB (for ISH) and 4.4MB (non-ISH). - Unused space 3MB (for release) and 2MB (for debug) layout. Change-Id: I881832a6b11a35710d4e847feadcc544b1f5d048 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77994 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-09-21mb/google/rex/var/karis: Enable PIXA touchpadTyler Wang
Karis uses PIXA touchpad, update related settings. BUG=b:294155897 TEST=(1) emerge-rex coreboot (2) Test on karis, touchpad function works Change-Id: I26e3257485c4abe050de7a79c6d3b72dbd048710 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77517 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-20mb/google/rex/var/karis: Set VPU disable as defaultTyler Wang
BUG=b:299374763 TEST=emerge-rex coreboot Change-Id: I40fc768522e8679337c3b9f5497278e9f4639c3e Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77888 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-20mb/google/rex: Select MIPI pre-prod if MTL pre-prod Si setSubrata Banik
This patch ensures that the `DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` config is enabled if the underlying platform is built with a pre-production SoC (aka `SOC_INTEL_METEORLAKE_PRE_PRODUCTION_SILICON` config is enabled). BUG=b:300652989 TEST=Ensures `DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` is enabled for google/rex4es aka all variants with ES silicon. Change-Id: Ieda39427915fa3973b832376ec20fc414ac2bedd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77993 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2023-09-20mb/{google,intel}: Choose platforms with pre-prod Meteor Lake SoCSubrata Banik
The tree contains engineering sample boards, that ship with pre-production Meteor Lake SoC. These boards are not sold. BUG=b:300652989 TEST=Ensure mainboards like google/rex4es and screebo4es have `SOC_INTEL_METEORLAKE_PRE_PRODUCTION_SILICON` config enabled. Change-Id: I1a875a0f1d2c38582f35250ebe645e53599f62de Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77992 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-09-19mb/google/rex/var/screebo: Change GPP_C06 to NCZhongtian Wu
GPP_C06 is the report pin of the touchpanel and has no actual function. Disable this pin to solve the leakage problem. BUG=b:298529441 BRANCH=none TEST=Test success by EE. Change-Id: I13f25788c0258639da4e277e7a15454a08d1599b Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77716 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-16mb/google/rex: Optimize FMD usage for rex variantsSubrata Banik
This patch eliminates the need to maintain separate FMD files for rex variants and rex variants with ISH. It does this by using the BOARD_GOOGLE_MODEL_REX_EC_ISH config to differentiate between ME-RW layout sizes. TEST=Able to build and boot google/rex and google/rex_ec_ish. Change-Id: Ibb6ee9aad9fb68198c6c1a1d5978f77d53a2e3ac Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77895 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-16Revert "mb/google/rex/var/screebo: Reduce TCC from 90°C to 80°C"Subrata Banik
This reverts commit 449c6d981c216e05d5238056f03c7794e43600ec. Reason for revert: (EVT board build does not exhibit shutdown followed by warm reboot) This commit reverts the workaround that limits the TCC activation temperature. The original issue that was reported (shutdown followed by warm reboot) was not seen in the EVT board build, so this change is likely unnecessary. Change-Id: I22adcdee6512e57ad0b6d531f2611e22a95c863e Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-15mb/google/rex/var/karis: Disable stylus/FP module based on fw_configTyler Wang
There are going to be skus without stylus and fingerprint module. Disable stylus and fingerprint module based on fw_config. BUG=b:290689824 TEST=emerge-rex coreboot Change-Id: I047aae06c4a915d0392edc836757b882a261c178 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77647 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15mb/google/rex/var/karis: Update fw_config settingsTyler Wang
Update fw_config settings for karis: | | | 0 --> STYLUS_ABSENT | | Bit 2 | STYLUS | 1 --> STYLUS_PRESENT | | | | | | Bit 3-5 | AUDIO | 0 --> ALC5650_NO_AMP_I2S | | | | | | Bit 8-9 | MIPI_CAM | 0 --> UF_CAM_HI556 | | | | | | | | 0 --> FP_ABSENT | | Bit 10-11 | FP_MCU | 1 --> FP_MCU_NUVOTON | | | | | | | | 0 --> WIFI_CNVI | | Bit 13 | WIFI_TYPE | 1 --> WIFI_PCIE | BUG=b:290689824 TEST=emerge-rex coreboot Change-Id: I1df30ad32d212a36b8a5bd7324f3eb8045b2795c Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-15mb/google/rex: add support for UWBEran Mitrani
UWB on Rex will have 2 options to connect to the SoC: 1. Through GSPI1 (muxed with FP) 2. bit-bang over GPP This CL adds GSPI1 option. BB may be added later. BUG=b:263413448, b:263499898 TEST=UWB ranging works on Rex with this CL Change-Id: I93b3bcef84d775866df43d00c934f013e9f85c47 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76665 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-14mb/google/rex: Enable DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC for ES ↵Jamie Ryu
variants This enables DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC for rex variants boards with ES SoC to load pre-production signed IPU FW from IPU kernel driver to make Camera function properly. BUG=None TEST=Build rex and check if SSDT-IPU0 includes the correct value for "is_es" with Meteorlake ES and QS SoC. Change-Id: I407d1932762622652939e8568fe34c704bc3b433 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77855 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-08mb/google/rex: Fix ACPI MPTS method for non-5G board SKUsCliff Huang
MPTS method should only be generated for the board sku with 5G. BUG=NA TEST=Check kernel messages when going to S3. The following errors should not be seen: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.RP06.RTD3._STA] ACPI Error: Aborting method \_SB.MPTS due to previous error (AE_NOT_FOUND) ACPI Error: Aborting method \_PTS due to previous error (AE_NOT_FOUND) Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I78f434c9049773cf5229d3a1f3934ae82d1fe46d Reviewed-on: https://review.coreboot.org/c/coreboot/+/77690 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-08mb/google/rex: Require VBOOT_LID_SWITCH for Chromebook designSubrata Banik
This patch ensures that platforms with lids, such as Chromebooks, only select the VBOOT_LID_SWITCH configuration option. Only samples the LID GPIO if VBOOT_LID_SWITCH config is enabled, otherwise fake LID is open to avoid shutdown after reaching depthcharge. Tested by building and booting Google/Rex with the VBOOT_LID_SWITCH configuration option enabled, and verifying that google/ovis does not required VBOOT_LID_SWITCH config. Change-Id: Ic5123b822a5a7021023319cb08a3f9e5225961ba Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77693 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-07mb/google/rex/var/karis: Update MIPI User facing camera settingsTyler Wang
Update overridetree and GPIO settings for MIPI UFC due to updated schematic updates. BUG=b:298133153 TEST=emerge-rex coreboot Change-Id: I4c3197e3f15e0cb3fc640b1749d8681299981563 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77591 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eran Mitrani <mitrani@google.com>
2023-09-04mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hangWentao Qin
Setting SaGvWpMask to SAGV_POINTS_0_1_2 in dev tree can effectively avoid the idle hang issue, but it will affect the system power. (Before root cause, this is a short term workaround to unblock function test.) BUG=b:287170545 TEST=Able to idle for more than 5+ hours without any hang. Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Change-Id: I0947815ab79b470d2ae922cffdd8250c60cf1afd Reviewed-on: https://review.coreboot.org/c/coreboot/+/77520 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
2023-09-02mb/google/rex/var/karis: Drop unused audio codecs and amplifiersTyler Wang
BUG=b:294155897, b:295112765 TEST=emerge-rex coreboot Change-Id: Ic7e272a484ea76dfc3a314b3597cbc18c856a9ca Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-02mb/google/rex/var/karis: Add audio codec ALC5650Tyler Wang
Add audio codec ALC5650 related settings. BUG=b:294155897, b:295112765 TEST=emerge-rex coreboot Change-Id: I2b54dd600b47ecdfd1f488a8c623bc0599c8936f Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77360 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-02mb/google/rex/var/screebo: add hook for WiFi SAR tableYH Lin
As a preparation for WiFi SAR table addition, adding hook for it. BUG=b:291155207 TEST=emerge-rex coreboot Change-Id: Ia313cfddec278e6bf8498407b242c027a5891deb Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77598 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-02mb/google/rex/var/screebo: add FP_MCU fw_configYH Lin
Add FP_MCU definitions for fw_config according to the current build matrix. BUG=b:291155207 TEST=emerge-rex coreboot Change-Id: Id67b20a750d14eb23c62be9a30a5ef21d80e486a Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-02mb/google/rex/var/screebo: remove SD_ABSENTYH Lin
Remove SD_ABSENT since it's not being used, and CBI FW_CONFIG in current build does not reflect this config neither. BUG=b:291155207 TEST=emerge-rex coreboot Change-Id: Icfa472ff5570ac728038ec67a762289407760812 Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77596 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-02mb/google/rex/var/karis: Enable ELAN touchscreenTyler Wang
BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I179df1e0e544783f77a485ad08293530e8a86ecd Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77592 Reviewed-by: Eran Mitrani <mitrani@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-01mb/google/rex: Add `rex4es_ec_ish` variantBernardo Perez Priego
This patch creates rex ES variant with EC ISH enabled. BUG=b:296886409 TEST=Able to build and boot rex4es_ec_ish variant. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I2b1cdb8cffd66badd90a7bf9825d9decb07941a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-31mb/google/rex/var/karis: Update GPIO settings for NC pinsTyler Wang
According to the schematic, set below GPIO to NC: 1. GPP_C18 2. GPP_C19 3. GPP_S04 4. GPP_S05 BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: If1f847d2db83b63a351203f0449cc1368bef27f4 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77558 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-31mb/google/rex/var/rex0: Add HDMI GPIOs to early GPIO listAnil Kumar
Add HDMI GPIO configuration to early GPIO list to support VGA text o/p in Pre-RAM stage on HDMI. BUG=b:279173035 TEST=If CONFIG_UGOP_EARLY_GRAPHICS is set to y, check SOL text on HDMI during Pre-RAM boot stage. Change-Id: I13691850d09a442d5d5493a2b1dcf1145cf9797a Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-31mb/google/rex: Enable Fast V-Mode for MTL-U 15WSubrata Banik
This patch sets the Fast V-Mode (FVM) configuration parameter as suggested in Intel doc 640982. As per the doc, Intel MTL-U 15W CPU supports FVM on IA and SA. Fast V-Mode (FVM): Intel Meteor Lake introduces the ability to manage the peak power events it calls "reactive peak power management". The Fast V-Mode is one such technique to perform the reactive peak power management. It relies on the detector integrated inside the processor which senses when the processor load current exceeds a present threshold by monitoring the processor power domain IMVP (Intel Mobile Voltage Positioning) VR sense point. The baseline ITRIP for IA is 66A and 21A for SA. BUG=b:286809233 TEST=Able to build and boot google/rex without seeing any performance regression. Change-Id: Ia7157bddf2e9586e4a91cc55e48693561072cd05 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75763 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-30mb/google/rex/var/karis: Remove USB cameraTyler Wang
Karis use MIPI camera only, remove related settings. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I96316d63c068c48b5bec75d3b4c5444d15fd985f Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77510 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-30mb/google/rex/var/karis: Remove SAR sensorTyler Wang
According to the schematic, karis does not have a SAR sensor. Update GPIO settings. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: Ib3b66b9594f2d0fddbbfc56e99f06b6587487f2a Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-30mb/google/rex/var/karis: Set GPP_D04 to NCTyler Wang
Follow schematic, set GPP_D04 to NC. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: Ie222a2773ff7d2b87641f55b4d37ff3bdf761cd2 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-30mb/google/rex/var/screebo: Enable GL9750 invert WP functionKun Liu
enable GL9750 invert WP function BRANCH=none BUG=b:297244291 TEST=emerge-rex coreboot Change-Id: I7fdc94b5ca6b316ee0291c38e39c5f8b08cbc127 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77414 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-28mb/google/rex/var/rex0: Enable BT offload audio for Intel MtP2 moduleAnil Kumar
Enable the required GPIO and FW_CONFIG support to configure BT offload audio in discrete mode for Intel Mysty Peak module on google/rex Proto2 HW. BUG=b:297125514 Test=Verified BT audio playback on google/rex Proto2. Change-Id: I560f1700f78f8b653dfcc2f26764f0ebf2652689 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77357 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-08-28mb/google/rex/var/karis: Remove UWBTyler Wang
According to the schematic, karis does not have a UWB, remove related settings. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I8a442518c2007cde883183871cef96db416850c0 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77437 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-26mb/google/rex/var/karis: memory: Add Micron MT62F512M32D2DR-031Tyler Wang
Add new memory part in the mem_parts_used.txt and generate the SPD ID. 1. MICRON MT62F512M32D2DR-031 WT:B BUG=b:291018417 TEST=emerge-rex coreboot Change-Id: I6e05c0d41a4899ed64dbab7efd8904cd361cb50e Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77426 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-26mb/google/rex/var/karis: Remove WWAN moduleTyler Wang
According to the schematic, karis does not have a WWAN module, remove related settings. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I653e3b4fae8a53018a6004528d1cfb3a6c883687 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77427 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-26mb/google/rex/var/rex0: Use FW_CONFIG to select the correct SAR tableSubrata Banik
This patch changes the SAR table selection logic to use FW_CONFIG which will eventually help to support different WiFi SAR tables. TEST=Able to build and boot google/rex. Change-Id: I8f1244e3c3715bc3fbe6be1ade87817ff19836de Signed-off-by: YH Lin <yueherngl@google.com> Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77428 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-25mb/google/rex/var/ovis: Update PWM_BUZZER GPIO configJakub Czapiga
BUG=b:271491845 TEST=Build and boot google/ovis on Rex P1 with buzzer added on GPP_B08 Change-Id: I44718ea15c93a075b6468f335a869a2cfa585273 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76049 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-25mb/google/rex/var/karis: Add SOC_TCHSCR_INT settings to gpio tableTyler Wang
Karis use I2C touchscreen only, add SOC_TCHSCR_INT(GPP_C07) to ramstage gpio table. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: Ie715cfbe1984dbe38cd933312304b42ce9088806 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-25mb/google/rex/var/karis: Fix incorrect GPIO pad numbersKapil Porwal
Fix incorrect GPIO pad numbers. GPP_F19 was mistakenly used instead of GPP_F14, GPP_F15 and GPP_F16 GPIOs. BUG=none TEST=none Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I219b78a5e92d9c56799964ea88615c27aed2e92e Reviewed-on: https://review.coreboot.org/c/coreboot/+/77401 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/google/rex/var/karis: Disable GSPI0Tyler Wang
According to the schematic, karis does not have a SPI touchscreen, remove related settings. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I55eb9e3cebe426fcd023789831ce64a18d075d69 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-23mb/google/rex/var/karis: Remove WWAN temperature sensorTyler Wang
According to the schematic, karis does not have a WWAN temperature sensor, remove related settings. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: Ic82c6cfec067faa37d452bed5c4977402a2139a5 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77284 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-21mb/google/rex/var/karis: Remove world facing cameraTyler Wang
According to the schematic, karis does not have a WFC. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I9b4ecf2e96c77c131a60e48614d792370dd33423 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eran Mitrani <mitrani@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-20mb/google/rex: include Elan HID over SPI ASL for Rex4ESEran Mitrani
Existing code did not include the HID over SPI for rex4es. This CL corrects this issue. BUG=None TEST=Tested on Rex Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I02f7c4b68cfee2ebb202581c9f031af99ab4b6f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77245 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-18mb/google/rex: Dump ISH version for `rex_ec_ish` variantSubrata Banik
This patch selects `SOC_INTEL_STORE_ISH_FW_VERSION` config to dump the ISH version as part of the .final hook. BUG=b:285405031 TEST=Able to build and boot google/rex_ec_ish. Verify the ISH version is same as MFIT ISH version section. > cbmem -c | grep "ISH" [DEBUG]  ISH version: 5.6.0.28821 Change-Id: I052af85ad836ab81ff6c510bb74e042b11940a65 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77178 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-18mb/google/rex/var/screebo: Update DTT settings for thermal controlKun Liu
update DTT settings for thermal control BUG=b:291217859 TEST=emerge-rex coreboot Change-Id: I6e6ad653157dc87a7d87b5ffc4f9590991a7c284 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76678 Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/rex: Update ISH GPIO's configurationBernardo Perez Priego
Configures ISH related GPIO's based on FW_CONFIG obtained from CBI. BUG=b:280329972,b:283023296 TEST= Set bit 21 of FW_CONFIG with CBI Boot rex board Check that ISH is enabled, loaded, and functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I778251aadef4499427fc9855adfdd9cade3a3e70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77235 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/rex/var/karis: Update USB settingsTyler Wang
BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: Ia4bd6fe02ffa62ed8aeffb188de5c4c4b64900ff Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77106 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-17mb/google/rex/var/karis: Remove SD card and ISHTyler Wang
BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I1575ee1d7e4c834ad15f60a3b7d63c041a8d4890 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77007 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/rex/var/karis: Modify SSD settingsTyler Wang
Follow schematic, modify SSD related settings. BUG=b:294155897, b:289880020 TEST=emerge-rex coreboot Change-Id: Ie9c228ed7ccc83afaa8365f89c1d5cdedc4f0c8c Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77006 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/rex/var/karis: Copy devicetree from rex0Tyler Wang
Add initial devicetree config for karis. It's copied from rex0 and only for initial settings, will update more settings afterward. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I89585a86e8afe636d3927a21a64451b59591acda Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-17mb/google/rex/var/karis: Copy Kconfig from rex0Tyler Wang
Add initial Kconfig settings for karis. Copied from rex for support audio codec, SD card and ISH. It's only for initial settings, will update more settings afterward. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I4bcea7f5e678f2862b3477206838786ff5bad173 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77182 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/rex/var/karis: Add TPM supportTyler Wang
BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: I4076ee4a16b7260db464760d5a19e1144081bab8 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77181 Reviewed-by: Eran Mitrani <mitrani@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/rex/var/karis: Copy GPIO from rex0Tyler Wang
Add initial GPIO settings for karis. It's copied from rex0 and only for initial settings, will update more settings afterward. BUG=b:294155897 TEST=emerge-rex coreboot Change-Id: Ic1e52a1eaca0aa5f68661826a70ccb89d6e302dc Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77003 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/rex/var/ovis: Fix Bluetooth configurationJakub Czapiga
Bluetooth was missing USB configuration, so add it according to the schematics. BUG=b:290111789 TEST=Boot on Ovis and list bluetooth with `hciconfig` Change-Id: Iee8a3368bbad6c5b49f09ec7335d77ed63ecc784 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77146 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-10mb/google/rex: Create karis4es variantEran Mitrani
This patch creates a new variant karis4es. The new variant will support only ESx samples. The existing karis variant will support the QS samples. BUG=b:293326312 TEST=Image built properly Change-Id: I854fee7206528a235f027ff8ec98593a02be4806 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76761 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-08-08mb/google/rex/variants/ovis: Use correct device_index for RT8168Stefan Reinauer
Fix ethernet MAC address configuration. Currently, coreboot would use ethernet_mac0 for both ports when setting the system's MAC address. Instead, set the right device_index for the second controller to pick up ethernet_mac1. BUG=b:294856127 TEST=boot device and observe two different MAC addresses on the ethernet ports. Change-Id: I5ff6d62d2f837a120f7095f9b9aed487e6c5aee4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77044 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-08mb/google/rex/var/screebo: Change sdcard clk from 7 to 6Kun Liu
Update firmware to reflect schematics change for SD Card CLKSRC from 7 to 6 for EVT board revision BUG=b:291051683 TEST=emerge-rex coreboot Change-Id: I3347f739650458c833d5a825742cf1d663853cc5 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77023 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-05mb/google/rex: enable d3hot for storage devicesSukumar Ghorai
_DSD "StorageD3Enable" property is needs to be set under the root port in the DSDT or SSDT. The ACPI _DSD method is the preferred way to opt D3hot support for storage devices. This also bypasses the low LTR from SSD that blocking S0i2.2 LTR/latency SoC requirement. Name (_DSD, Package () { ToUUID("5025030F-842F-4AB4-A561-99A5189762D0"), Package () { Package (2) {"StorageD3Enable", 1}, // 1 - Enable; 0 - Disable } } ) BUG=b:289028958 TEST=Check code compiles & boot rex, and verify the "StorageD3Enable" SSDT entry. Change-Id: I19decc2706954e73bc28fc2d9c3c4d18d2c384b7 Signed-off-by: Kangheui Won <khwon@chromium.org> Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76835 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-04mb/google/{rex,ovis}: Disable C1-state auto demotion for rex & ovisSukumar Ghorai
C1-state auto demotion feature allows hardware to determine C1-state as per platform policy. Since platform sets performance policy to balanced from hardware, auto demotion can be disabled without performance impact. Also, disabling this feature results soc to enter PC2 and lower state in camera preview case and save platform power. Note: C1 demotion heuristics used EPB parameter to balance between power and performance, i.e. low threshold when EPB is low in-order to get C1 demotion faster and vice-versa. ChromeOS operates at default EPB=0x7 (low EPB) in both AC/DC, so in DC mode it gets more C1 demotion hits than expected (similar to AC mode) and losing power respectively. BUG=b:286328295 TEST=Code compiles and correct value of c1-state auto demotion is passed to FSP. Also verified PC residency improvement ~10% in camera preview case. Change-Id: I548e0e5340dec537d05718dd2f4652e10fb36ac0 Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-04mb/google/rex/var/screebo: Add fw_config probe for GL9750 and RTS5227SKun Liu
Add support for SD card reader GL9750 and RTS5227S BUG=b:284273384 TEST=emerge-rex coreboot Change-Id: I98aa0d3e52c355f6c1528c912a6fa0f32652dda8 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-03mb/google: Add more comment on GFX devices for the future referenceWon Chung
Add more details to instruct future boards/models implementers regarding how GFX devices should be added. If HDMI and DP connectors are enumerated by the kernel in /sys/class/drm/ then corresponding GFX device should be added to ACPI. It is possible that some connectors do not have dedicated ports, but still enumerated. The order of GFX devices is DDIA -> DDIB -> TCPX. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I59e82ee954a7d502e419046c1c2d7a20ea8a9224 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76776 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-08-02mb/google/rex/variants/ovis: Use and configure RT8168 driverStefan Reinauer
This makes sure google/ovis don't get a random mac address on boot. Additionally, program the LAN WAKE GPIO properly as per the Ovis schematics dated July'23. BUG=b:293905992 TEST=Verified on google/ovis that able to get the fixed MAC address across the power cycles. Change-Id: I699e52e25f851de325f96ef885e04d15ca64badd Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76872 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-01mb/google/rex/var/screebo: Enable RTD3 for SSDKapil Porwal
Currently, S0iX test is failing because S0i2 susbstate is blocked. Enable RTD3 for SSD to unblock S0i2.2 substate residency. BUG=none TEST=Screebo can enter into S0iX. S0iX substate residency w/o this CL - ``` Substate Residency S0i2.0 0 S0i2.1 38451594 S0i2.2 0 ``` S0iX substate residency w/ this CL - ``` Substate Residency S0i2.0 0 S0i2.1 12108 S0i2.2 33878424 ``` Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I50ac730820b3f29c387dc73bd90f1392a8797e24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-01mb/google/rex/var/screebo: Restrict ASPM to L1 for SD controllerKapil Porwal
Restrict ASPM to L1 for SD controller to avoid AERs. BUG=b:288830220 TEST=No PCIE AER on SD controller on Screebo. w/o this CL - ``` ~ # lspci -s 00:06.0 -vvv | grep -i aspm LnkCap: Port #9, Speed 16GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ ~ # lspci -s 02:00.0 -vvv | grep -i aspm LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- ~ # dmesg | grep -i -e "pci.*error" [ 0.734597] pcieport 0000:00:06.1: AER: Corrected error received: 0000:02:00.0 [ 0.734882] rtsx_pci 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 0.735258] rtsx_pci 0000:02:00.0: device [10ec:522a] error status/mask=00001000/00006000 [ 0.736159] pcieport 0000:00:06.1: AER: Corrected error received: 0000:02:00.0 [ 1.520903] pcieport 0000:00:06.1: AER: Corrected error received: 0000:02:00.0 [ 1.531587] rtsx_pci 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 1.548894] rtsx_pci 0000:02:00.0: device [10ec:522a] error status/mask=00001000/00006000 [ 1.567490] pcieport 0000:00:06.1: AER: Multiple Corrected error received: 0000:02:00.0 ``` w/ this CL - ``` ~ # lspci -s 00:06.0 -vvv | grep -i aspm LnkCap: Port #9, Speed 16GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ ~ # lspci -s 02:00.0 -vvv | grep -i aspm LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ ~ # dmesg | grep -i -e "pci.*error" ``` Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I05f02c46486be42286fe9bc4f4be17763bb12b79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76829 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 02:30:02 +0000