summaryrefslogtreecommitdiff
path: root/src/mainboard/google/octopus
AgeCommit message (Collapse)Author
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
Use tabs instead of eight (sometimes less) spaces. Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-24mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID 51 - Garfour EVT (non-touch, TypeA DB) 52 - Garfour DVT (touch, HDMI DB) BUG=b:161554087 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I3cb17c2b665c303da210817a531c869c6324b249 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Henry Sun <henrysun@google.com>
2020-07-01mb/google/octopus/variants/dood: fix disable_xhci_lfps_pm by skuKenneth Chan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
This change allows mainboard to configure different wakeup routes that can be used by a GPIO key: 1. SCI: This is selected when SCI route is used to wake the system. It results in _PRW property being exposed in ACPI tables. 2. GPIO IRQ: This is selected when GPIO controller wake is used to wake the system. It is typically used when the input signal is not dual routed and the GPIO controller block is not capable of applying filters for IRQ and wake separately. In this case, _PRW is not exposed in ACPI tables for the key device. 3. Disabled: No wakeup supported. Based on these wakeup routes, gpio_keys_add_child_node() is updated to expose _PRW and _DSD properties for wakeup appropriately. Additionally, the change updates mainboards that were already using gpio_keys to set wakeup_route attribute correctly and renames "wake" to "wake_gpe" to make the usage clear. BUG=b:159942427 Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-25mb/google/octopus/variants/bobba: fix disable_xhci_lfps_pm by skuSheng-Liang Pan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I53621d7674a531adfa40e8703cb2cd01c50376b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42564 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-06mb/google/octopus/variants/garg: Add G2Touch touchscreen supportTony Huang
BUG=b:156564296 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I99b04fec88da481e21b7a05807a4f1edeb3a5bdf Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-26apollolake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Apollo Lake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on octopus system Change-Id: I609744d165a53c8f91e42a67da1b972de00076a5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41233 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-13mb/google/octopus/variants/foob: Disable xHCI compliance modeTommie
When any USB image disk is connected to the DUT through HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen, it cannot boot from USB. We found the SS hub cannot be enumerated. So disable xHCI compliance mode. BRANCH=octopus BUG=b:155347573 TEST=Confirm successful boot from USB Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2 Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mb/google/octopus/variants/dood: Disable XHCI LFPS power managementKenneth Chan
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] are set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I88357f44317a5cff2e04508638eb065e5ada4c4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2020-05-11mb/google/octopus: Fix default FMDMatt DeVillier
On Apollo Lake/Gemini Lake platforms, FSP requires more than a simple RW_MRC_CACHE; without the RECOVERY and VAR cache regions, FSP-m will fail on s3 resume and trigger a full reset instead. This fixes the default.fmd for octopus to match that used for reef. Test: build/boot google/ampton, verify sleep/resume works under Linux with 5.x kernel. Change-Id: I8565aa93256df7d6e0b359d70e9305f34e5ccb60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-01mb/google/octopus/variants/bobba: Disable XHCI LFPS power managementSheng-Liang Pan
LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-04-29mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID: 49 - Garfour EVT (touch, TypeA DB) 50 - Garfour EVT (non-touch, HDMI DB) BUG=b:152861752 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I656a2bb2404efded6da6697664748b6c8d2ca4e0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-04-28device: Constify struct device * parameter to write_acpi_tablesFurquan Shaikh
.write_acpi_tables() should not be updating the device structure. This change makes the struct device * argument to it as const. Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-28mb/google/octopus: add default non-ChromeOS FMAPMatt DeVillier
Add a FMAP which supports SMMSTORE and non-ChromeOS payloads, since GeminiLake-based devices like Octopus cannot use an automatically-generated FMAP due to strict layout requirements. Change-Id: Iebacbea5b3a782b2abf1d6e28acd21b87dc9402b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40596 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28mb/google/octopus: Add VBT for ampton variantMatt DeVillier
Add VBT file, extracted from stock Google firmware, and select its use via Kconfig. Change-Id: I256c1c72d1d1e40ea9426fa717bfc4f9c950a91f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-14mb/google/octopus/variants/lick: Disable xHCI compliance modeJulia Tsai
Since the first LFPS timeout causes xHCI to enter compliance mode, the SS hub cannot be enumerated. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:153782196 TEST=Verified usb operation successfully. Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com> Change-Id: If0bf68c8cf0a2a3b857395b6b82e46cc384ba65c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39874 Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-13ec/google/chromeec: add smbios_mainboard_manufacturer()Aaron Durbin
When EC_GOOGLE_CHROMEEC_SKUID is selected provide an implementation of smbios_mainboard_manufacturer() so the code doesn't need to be duplicated in the mainboards. BUG=b:153767369 Change-Id: Ib65fe373a79d606cffcba71882b0db61be5a18c3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-07mb/google/octopus/variants/phaser: Disable xHCI compliance modeTommie
Since the first LFPS timeout causes xHCI to enter compliance mode, the SS hub cannot be enumerated. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:149723583 TEST=Verified USB operation successfully. Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Change-Id: I3e6ab6ec0c4865cf2467da900f13d18468ff356f Reviewed-on: https://review.coreboot.org/c/coreboot/+/39968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-04-06mb/google/octopus: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I8076155330100982de82d410b6579ac99ed89e7b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40187 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18src/mainboard/g/octopus: Enables GMM in the devicetree for octopusFranklin He
Adds GMM into the baseboard of Octopus For GLK, PCI device 3 is GMM according to Document#: 569262(Glk EDS Vol-1 rev2-7) Related to Gerrit review 39579 BUG=b:151115705 BRANCH=None TEST=Flashed final image on Chromebook Change-Id: I75b4a835c18c5eeb542b7f7b89deea45a31e47bd Signed-off-by: Franklin He <franklinh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-17mb/google/octopus: Add custom SAR values for Foob360Peichao Wang
Foob360 would prefer to use different SAR values. Since Foob360 sku id is 9. BUG=b:149362272 BRANCH=octopus TEST=build Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I8cc5d73629990f19d2c1044debdba4990c54d07e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
wpsw_boot is deprecated in favour of wpsw_cur. As such, coreboot no longer needs to share "write protect" GPIO with depthcharge. BUG=b:124141368, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: I2fcb7f82aa063fd72928171af5cbef0356ba620c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:2088434 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39318 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04src/ec,mainboard: Move weak smbios_system_sku() override inwardsEdward O'Callaghan
Internalise smbios_system_sku() strong symbol inwards in the ec_skuid.c implementation and simply wrap a call to: google_chromeec_smbios_system_sku(). BUG=b:150735116 BRANCH=none TEST=none Change-Id: I05ebfc8126c0fb176ca52c307c658f50611ab6ab Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39146 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04mainboard/google/octopus: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders and set the sku id max to 0xff for legacy to ensure we behave the same. BUG=b:149348474 BRANCH=none TEST=tested on hatch Change-Id: I60a37a5f9659b8df4018872956f95e07a3506440 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-02mb/google/octopus: support new Elan touch panel for FoobTommie
This is new elan touch screen IC, which includes touch panel and USI pen. BUG=b:149800883 BRANCH=octopus TEST=build bios and verify touch screen works fine Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Ibec3d08cc740e398a10a5c845181318724afc70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-02-17mb/google/octopus/variants/dood: add two new SKU IDsKenneth Chan
add SKU ID 3 and 4 for dood DVT 1: Dood WiFi + LTE (evt) 2: Dood WiFi (evt) 3: Dood WiFi + LTE + dual camera (dvt) 4: Dood WiFi + dual camera (dvt) BUG=b:148988979 TEST=build firmware and verify on the DUT of sku 3 and 4 check LTE module is enabled or not Change-Id: If86efe2a2f7b2e165ad44220b6dd59e9080b5892 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38730 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/octopus: Add custom SAR values for BipshipTony Huang
Bipship is a sustaining project of Blooguard. SAR value follow Blooguard. BUG=b:149414960 BRANCH=octopus TEST=build and verify load correct SAR value by sku-id Change-Id: Ic45ed10fc147401d4278f1811a86cd2b2e4c63ac Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-02-09mb/google/octopus/variants/lick: Increase TCC offset to 15Hash.Hung
Change tcc offset from 0 to 15 degree celsius for lick. BUG=b:147198431 BRANCH=octopus TEST=Build, and verify test result by thermal team. Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com> Change-Id: Ife6b02321145837e05c82f979998466b83317f86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38506 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09mb/google/octopus: Override VBT selection for BloogTony Huang
Since most of Bloog series SKUs need to disable DRRS support. If Bloog and Unprovisioned SKUs then return vbt.bin to enable DRRS support, return vbt_blooguard.bin for other SKUs to disable DRRS support. Bipship follow blooguard to disable DRRS support. BUG=b:148892903, b:147021309 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is bipship. Change-Id: I61f12d4ddea17a05255751fde2a5ce822dd2e782 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-01-27google/octopus: Disable bootblock consoleJulius Werner
The GLK bootblock seems(?) to be hard limited to 32KB and some Octopus variants are so close to that that they only have 0.5KB left. This is blocking development of new core features, so let's disable the bootblock console to gain a couple of KB back (like we already did on RK3288). There are probably other opporunities for code size reduction here (e.g. it seems that almost half(!) of that whole bootblock size is taken up by devicetree.cb structures), but I'm not familiar enough with the platform to dig into them. Change-Id: I05b4ecf5abef7307e3d0a81db04a745ff3da0c42 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38521 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10src: Remove blank acpi_tables source filesKarthikeyan Ramasubramanian
Due to build rules, dummy acpi_tables source files were added in many mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3 ("src/arch/x86: Build mainboard acpi_tables source if present"), the build system will build mainboard acpi_tables only if present. Remove the dummy/empty/blank acpi_tables source files. BUG=None TEST=Build test with some google mainboards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-26mb/google/octopus/variants/dood: support LTE moduleRen Kuo
related LTE GPIOs: GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:146843935 BRANCH=octopus TEST=build and verify on the DUT with LTE Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Ief6c993ede2bb4b3effbb05cfe22b7af4fcf7faf Reviewed-on: https://review.coreboot.org/c/coreboot/+/37931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/google/octopus/variants/bobba: fix LTE power sequence and moveSheng-Liang Pan
get_board_sku to smm stage. fix Power_off section power sequence. power_off_lte_module() should run in smm stage, add variant.c in smm stage. also move get_board_sku() to mainboard_misc.c so that we can use it in smm stage and ramstage. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I287ba1cb092a95b3a9dd1f960a3b84fd85b9b221 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37649 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/octopus: Add two new sku IDs for foobTommie
Declare these sku IDs: -SKU: 1 Foob, 1-cam, no touch, no pen. -SKU: 9 Foob360, 2-cam, touch, pen. BUG=b:145837644 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Iffcbb3f6f945ea299ff687a383a82b88dcd11ea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/google/octopus/variants/garg: update new SKUKevin Chiu
add new SKU ID below: 19 - Garg PVT (HDMI DB, Touch) 20 - Garg PVT (2A2C DB, Touch) 38 - Garg360 EVT (2A2C DB, touch, no stylues, rear camera) BUG=b:146260545 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ic74ce14db7060f3124c1a277eb3625ce0ff0b9f0 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-09mb/google/octopus: Create Foob variantPeichao Wang
This commit creates a foob variant for Octopus. The initial settings override the baseboard was copied from variant phaser. BUG=b:144890301 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ibcdda4dd0846612f5e98ab454db7144c1caf0507 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37456 Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-04mb/google/octopus: Create Lick variantHash.Hung
Create new variant for Lick that is copied from phaser variant. Remove unnecessary code, due to not support touchscreen and stylus. Set to default_override_table. Remove variant.c. BUG=b:145181137 BRANCH=octopus TEST=./util/abuild/abuild -p none -t google/octopus -x -a Change-Id: If732d94194defb9f5ee9c847ee93dd58aef01174 Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37247 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-25mb/google/octopus: disable fmap cache for all octopus devicesPatrick Georgi
Meep was just the first one to fail, but the others aren't any better. Change-Id: I177c50cfe7593a5b2ad770ce1ab1191d2dff93d2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37163 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-11-19mb/google/octopus: Disable fmap cache for meepPatrick Georgi
By removing this code, we get approximately back to where the board was before the fmap cache feature was added, which is small enough for the Chromium OS default configuration for the board to fit into the 32KB that the bootblock can use on the chipset again. Change-Id: I52c0c30a14929913ded144bf086c12938e9c2699 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-15mb/google/octopus/variants/bobba: Add SX9310 sensor to devicetreeSheng-Liang Pan
Add semtech SAR sensor. BUG=b:143449140 BRANCH=octopus TEST=Boot kernel with sx931x driver, i2cdetect show UU on slave address. Change-Id: Icfb8acf1bac73973748aa7443c95147c60bad770 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36850 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: support LTE power sequenceSheng-Liang Pan
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I68b71425391eda1e92806fecdb9c8dcd54f0b95a Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36771 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24mb/google/octopus: Override VBT selection for Dorp/Vortininja/VorticonTony Huang
Add enum for Vorticon sku. Vortininja/Vorticon will load vbt_vortininja.bin Dorp will load vbt_dorp.bin BUG=b:143197918 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU-ID sets to Dorp/Vortininja/Vorticon. Change-Id: I67d7a8ab62a1838b0a0a05f532d8b067ece686d9 Cq-Depend: chrome-internal:2026287 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-22mb/google/octopus: Override VBT selection for BloogletTony Huang
Share the same vbt_blooguard.bin to disalbe DRRS support. BUG=b:143045247 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooglet. Change-Id: Ia180f265080f801a09f10ce8a8b520c47f218775 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-18mb/google/octopus: Create Dood variantTim Chen
This commit creates a dood variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:141960652 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: Id8852e1f04f4356fac5445f6da6d56d430c88ad0 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-18mb/google: Shrink GBB section sizeHung-Te Lin
Chrome OS firmware images have moved bitmap resources from GBB into CBFS for a long time, so the GBB should only hold firmware keys and HWID, that is usually less than 10k. ARM boards usually limit GBB to 0x2f00 (see gru, cheza and kukui) but many recent x86 simply copy from old settings and may run out of space when we want to add more resources, for example EC RO software sync. Note, changing the GBB section (inside RO) implies RO update, so this change *must not* be cherry-picked back to old firmware branches if some devices were already shipped. BRANCH=none BUG=None TEST=make # board=darllion,hatch,kahlee,octopus,sarien Change-Id: I615cd7b53b556019f2d54d0df7ac2723d36ee6cf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-16mb/google/octopus: Override VBT selection for BlooguardTony Huang
Disable DRRS on Blooguard SKU - 49, 50, 51, 52 BUG=b:142632381 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooguard. Cq-Depend: chrome-internal:1983227 Change-Id: I36a313fd2beacb878da7383f733e206067c1c0fb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-10-10mb/google/octopus/variants/fleex: Update GPIOs to fix EMRJohn Su
Update GPIO_138 and GPIO_139 setting to fix EMR function. BUG=b:141729962,b:141281846 BRANCH=octopus TEST=verify EMR function in Grob360S. Change-Id: I28cef592374fb4aeee2f3d3010cc0e237d62a2fd Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-07mb/google/octopus/variants/fleex: Adjust I2C0 CLK to meet specJohn Su
After adjustment on Grob360S I2C0 CLK: 389.9 KHz BUG=b:141729962 BRANCH=master TEST=emerge-octopus coreboot chromeos-bootimage measure by scope with Grob360S. Change-Id: I6a30257b7978cc8899a55f9fd6ffffe01cb2a851 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-10-03mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPIMartin Roth
Previously all boards using eSPI for the Chrome EC just called it LPC as the code for the chrome EC is the same between the two busses. I'm adding a new Kconfig symbol to specify eSPI, so switch the boards that actually use eSPI to that symbol and add the LPC symbol to all the others. The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default to enabled for x86 platforms, so one symbol or the other needs to be specified for each platform. BUG=b:140055300 TEST=Build tested only. Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/octopus/variants/garg: add LTE sku to config power sequenceKevin Chiu
Add SKU#18 to config power sequence below: GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:134854577,b:137033609 BRANCH=octopus TEST=build Change-Id: I58e07518f6daaf608684c9fa1b1c88fc592ea117 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-10mb/google/octopus: Add a new sku for meepWisley Chen
Add a new sku4 for meep: sku4: Stylus + no rear camera BUG=b:140360096 TEST=emerge-octopus coreboot Change-Id: Icde7f032c0acf7562b5d5f2c6a8b0c2de91c45b2 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-09-05mb/google/octopus: Set sar file name for meep skuWisley Chen
Set meep sar file name by sku number Cq-Depend: chromium:1768380 BUG=b:138261454, b:118782854 BRANCH=octopus TEST=emerge-octopus coreboot, and check wifi_sar-meep.hex Change-Id: I25aa3080392ce277e537c973088dde569246630e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-05mb/google/octopus: Load custom SAR values by SKU ID for BloogTony Huang
Use sku-id to load the SAR values for Bloog device. BUG=b:138180187 BRANCH=octopus TEST=build and verify load Bloog SAR by sku-id Cq-Depend: chromium:1771477 Change-Id: Id0bc2609fd1c4eaeb380f8f1532ab30d34e2aeb3 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-30mb/google/octopus/variants/garg: update new SKUKevin Chiu
For Garg EVT build, add new SKU ID below: SKU4 LTE DB, touch: SKU ID - 18 SKU5,6 Convertible, 2A2C, Touch, Stylus, rear camera: SKU ID - 37 BUG=b:134854577 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Iea1d17efb9a5f274f8eefb2aaa683e75ab5de7d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-08-24mb/google/octopus: Re-assign sku number for vortininjaWisley Chen
Re-assign sku number for vortininja. BuG=b:138177049 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I3166a635151fcc7b2e3c0122fa05925cfa5df7d0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-23Revert "mb/google/octopus: Disable WLAN prior the entry of S5"Kane Chen
This reverts commit 38dbd6892080c93ccd24fbfa46ed5d9bdb7d9e99. Reason for revert: ODM helped to verify w/ BT runtime suspend disabled + revert this change And issue is gone. so I revert this change see the test result in https://partnerissuetracker.corp.google.com/issues/136039607#comment32 Change-Id: I248e9613cc39247a2bb88270c234c7d36d0ff60f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-08-21mb/google/octopus/variants/bloog: Add G2Touch touchscreen supportTony Huang
Add G2Touch touchscreen support for blooglet. BUG=b:139725457 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen by evtest. Change-Id: I6ebcc60f58857d8b28446932787742c2740fadd8 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-10mb/google/octopus: Add G2touch touchscreen supportWisley Chen
Add G2touch touchscreen support for Dorp/Vortinija/Vorticon. BUG=b:139110164 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen by evtest. Change-Id: Ia42757c881ec78b1c676ac984507732717af94a9 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-08-07mb/google/octopus: Add custom SAR value for VortininjaWisley Chen
Vortininja needs different SAR values than meep. Use sku-id to load SAR values. BUG=b:138261454 BRANCH=octopus TEST=build and verified SAR values by sku id Change-Id: I7b3ab51e1d6cada4faaba1b9d72bd9eacf6b04dd Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-08-05mb/google/octopus: Add EMRight digitizer supportWisley Chen
The device Vortininja uses the variant meep, and supports WACOM/EMRIGHT digitizer. BUG=b:138276179 BRANCH=octopus TEST=verified that WACOM/EMRIGHT digitizer can works. Change-Id: I2bed4edb0261953f122f1d9ccca1fe4fa9406b33 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-08-03mb/google/octopus: Add custom SAR values for droid/blorbSheng-Liang Pan
droid/blorb needs to use different SAR values than bobba. Use sku-id to load the SAR values. BUG=b:138091179 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: I71b5d69ffbba82018a682202df73b604332dd9e7 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34542 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/octopus: Override DDI1 DDC SDA/SCL for HDMIWisley Chen
The device Dorp uses the variant Meep, and supports HDMI. -sku33 (HDMI) -sku34 (HDMI + keyboard backlight) -sku35 (HDMI + Touchscreen) -sku36 (HDMI + keyboard backlight + Touchscreen) BUG=b:136522841 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I59ba2e56cf2f83ca9d533454570bcdd39c0a2e7c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34509 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/octopus: Override VBT selection for DorpWisley Chen
For dorp HDMI sku, select VBT which enables HDMI output. -sku33 (HDMI) -sku34 (HDMI + keyboard backlight) -sku35 (HDMI + Touchscreen) -sku36 (HDMI + keyboard backlight + Touchscreen) Cq-Depend: chrome-internal:1502253 BUG=b:136522841 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I62262378f85bb899073ffac7804be876e649e429 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-29mb/google/octopus: Add keyboard backlight supportWisley Chen
Dorp device support keyboard backlight, so enable it. BUG=b:138413969 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: If0c7b22b4be2a5d5216404a6944ac887883e9a47 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-07-23mb/google/octopus/variants/fleex: Remove gpio NC setting for enabling I2C0Frank Wu
Enable I2C0 in fleex then verify EMR function successfully BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with I2C0 in Grob360S. Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-19mb/google/octopus: Disable unused USB devicesKarthikeyan Ramasubramanian
Disable unused USB devices in the device tree so that the concerned ACPI objects do not get exported to the OS. BUG=b:133513961 BRANCH=octopus TEST=Boot to ChromeOS. Ensure that the USB devices are disabled based on port status and the concerned ACPI objects are not exported. Change-Id: I0faccdfb8a9df9ec52130437433b15973e3d6f1a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-19mb/google/octopus: Add ACPI configuration for USB devicesKarthikeyan Ramasubramanian
Add devicetree configuration for USB devices so that USB Port Capabilities (_UPC) and Physical Location of Device (_PLD) ACPI objects can be exported to the OS. BUG=b:133513961 BRANCH=octopus TEST=Boot to ChromeOS. Ensure that the _UPC & _PLD ACPI objects are exported for the configured USB devices in the SSDT table. Change-Id: I832ffe305d256296b7447035c5e5dcafb7c296d9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-16mb/google/octopus/variants/garg: support LTE power sequenceMarco Chen
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:137033609 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I7bf6fee087c885c22363b44aa98aa61f91be90b4 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-16mb/google/octopus: add variant_smi_sleepMarco Chen
Allow variants to customize their own smi sleep flow. BUG=b:137033609 BRANCH=octopus TEST=built Change-Id: I75db544d333a640848da9072878687c802c1c1a4 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34340 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16mb/google/octopus: add variant_early_override_gpio_tableMarco Chen
Allow variants to override GPIO configurations of baseboard in the bootblock stage. BUG=b:137033609 BRANCH=octopus TEST=built Change-Id: I18d380cdf58f0f24e1bb1bff394ed8a91188a22c Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-13mb/google/octopus: Add custom SAR values for BluebirdSeunghwan Kim
Bluebird needs to use different SAR values than Casta. Bluebird sku id is 2. CQ-DEPEND=CL:*1435310 BUG=b:129725065 BRANCH=octopus TEST=build Change-Id: I107a8519832fcf906b94f958a3dc508d19bb4727 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34080 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-10mb/google/octopus: Remove LPDDR4 RAMID index 5,6 CH[1] only SKUKevin Chiu
From Intel EDS: Table 3-5. LPDDR4 Configurations CH00 CH01 CH10 CH11 "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "Unpopulated" "Unpopulated" CH[1](CH10/CH11) can't use alone without CH[0] BUG=b:135498646,b:136694293 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I03af74301aad3e688c97992b37c59b20a4fff58a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34069 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Override DDI1 DDC SDA/SCL for Garg HDMIKevin Chiu
garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For HDMI SKU9, GPIO needs to be overriden to enable DDI1 DDC SDA/SCL. BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I6ad8e5aa52f503121b10fe353e4bf4021aee2061 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-03mb/google/octopus/variants/fleex: Enable EMR function for Grob360SChris Zhou
Enable EMR Pen Stylus function for Grob360S BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with HW reworked Fleex. Change-Id: Ia220dc0d3051b79b110b4df66df108f701776478 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33802 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Add custom SAR values for BlooguardTony Huang
Google project name is Bloog. Bloog is 12-inch LCD. Blooguard is 14-inch LCD so would prefer to use a different SAR values instead. Use sku-id to load the SAR values. BUG=b:135078377 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-06-21mb/google/octopus: Override VBT selection for GargKevin Chiu
Garg proto build has 3 SKUs: garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For SKU#9, VBT will need to be overridden to enable DDI_C output to HDMI BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Cq-Depend: chrome-internal:1380847 Change-Id: I6c0ec086496eaf217ea8e326f5084d886d0e698f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-06-21mb/google/octopus: expose get_board_sku as globalKevin Chiu
BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I1fb7b5eeac48f2cd9c24fa1d3ac3fe4b390762d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33448 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-15mb/google/octopus/variants/bloog: Set tcc offset for bloogTony Huang
Change tcc offset from 0 to 10 degree celsius for bloog. BUG=b:135225497 BRANCH=octopus TEST=Build and verify test result by thermal team. Change-Id: I4cbff846914a776c67692005f8b40cd73cfaf231 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-06-12mb/google/octopus: make new targets have DRAM part in CBI by defaultAaron Durbin
All new targets utilizing octopus mainboard support default to always using DRAM_PART_NUM_IN_CBI. This allows easier addition of new targets. BUG=b:132668378 BRANCH=octopus Change-Id: Idb136aa960260abe1657b16ded02a7dfb63c6849 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33370 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21mb/google/octopus: Create Garg variantKevin Chiu
This commit creates a garg variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:132668378 BRANCH=master TEST=emerge-octopus coreboot Change-Id: I9a36bc5dc3d2b891b1bce86015aa264894d1434b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-05-20mb/google/octopus: Override emmc DLL values for CastaJamie Chen
New emmc DLL values for Casta BUG=b:122307918 TEST=Boot to OS on 12 systems Change-Id: Ie51885fb9628fa093ecc38f4a3f3157f751ca9ab Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
The gpio table is only used by depthcharge, and depthcharge rarely has a need for the "recovery" gpio. On a few boards it does use the gpio as a signal for confirming physical presence, so on that boards we'll advertise the board as "presence". All these strings probably should have been #defines to help avoid typos (e.g., the "ec_in_rw" in stout seems questionable since everybody else uses "EC in RW"). Cq-Depend: chromium:1580454 BUG=b:129471321 BRANCH=None TEST=Local compile and flash (with corresponding changes to depthcharge) to 2 systems, one with a "presence" gpio and another without. Confirmed that both systems could enter dev mode. Change-Id: Id6d62d9e48d3e6646cbc1277ea53f0ca95dd849e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-06Fix code that would trip -Wtype-limitsJulius Werner
This patch fixes up all code that would throw a -Wtype-limits warning. This sometimes involves eliminating unnecessary checks, adding a few odd but harmless casts or just pragma'ing out the warning for a whole file -- I tried to find the path of least resistance. I think the overall benefit of the warning outweighs the occasional weirdness. Change-Id: Iacd37eb1fad388d9db7267ceccb03e6dcf1ad0d2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32537 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/octopus: I2C clock tuning for bloogTony Huang
Tune I2C params for I2C buses 5, 6, and 7 to ensure that the frequency does not exceed 400KHz. BUG=b:131132499, b:128998988 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage and measured frequency under 400 KHz Change-Id: Ie8cfba72a0654402ccb0274c00b44fbfa2deea21 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-23mb/google/octopus/variants/bloog: Add goodix touchscreen supportTony Huang
Add goodix touchscreen support BUG=b:131082228 BRANCH=octopus TEST=emerge-octopus coreboot and verify that touchscreen works on bloog. Change-Id: I0b3b481ca806b6452d67ace5dfe53f12a14ac3be Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
Change-Id: Iddba5b03fc554a6edc4b26458d834e47958a6b08 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-23mb/google/octopus: Add keyboard backlight support for Droid/BlorbSheng-Liang Pan
Droid/Blorb supports keyboard backlight feature, so enable the ASL code. BUG=b:130330141 BRANCH=octopus TEST=Build and boot to OS, verify that the string 'KBLT' is in the DSDT. Change-Id: I74684e3905d34b61fa4b851798dbca018f986e5a Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-20mb/google/octopus/variants/baseboard: Disable unused I2C 1Tony Huang
I2C 1 is not being used in any of the octopus variants, so disable it. BUG=none BRANCH=octopus TEST=Verify on meep and bloog reboot and s0ix suspend successfully Change-Id: I7ed5065cfd0b9780d13feb27cc78b8090d7a03a6 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 10:46:17 +0000