mb/**/{devicetree,overridetree}.cb: Indent with tabs

Use tabs instead of eight (sometimes less) spaces.

Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

3 files changed, 76 insertions, 76 deletions

diff --git a/src/mainboard/google/octopus/variants/bloog/overridetree.cb b/src/mainboard/google/octopus/variants/bloog/overridetree.cb
index 0212bea46d..6c2aa95747 100644
--- a/src/mainboard/google/octopus/variants/bloog/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/bloog/overridetree.cb
@@ -41,44 +41,44 @@ chip soc/intel/apollolake
 	# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps.
 	register "emmc_rx_strobe_cntl" = "0x0b0b"
 
-        # Intel Common SoC Config
-        #+-------------------+---------------------------+
-        #| Field             |  Value                    |
-        #+-------------------+---------------------------+
-        #| GSPI0             | cr50 TPM. Early init is   |
-        #|                   | required to set up a BAR  |
-        #|                   | for TPM communication     |
-        #|                   | before memory is up       |
-        #| I2C5              | Audio                     |
-        #| I2C6              | Trackpad                  |
-        #| I2C7              | Touchscreen               |
-        #+-------------------+---------------------------+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| I2C5              | Audio                     |
+	#| I2C6              | Trackpad                  |
+	#| I2C7              | Touchscreen               |
+	#+-------------------+---------------------------+
 
-        register "tcc_offset" = "10"
+	register "tcc_offset" = "10"
 
-        register "common_soc_config" = "{
-                .gspi[0] = {
-                        .speed_mhz = 1,
-                        .early_init = 1,
-                },
-                .i2c[5] = {
-                        .speed = I2C_SPEED_FAST,
-                        .rise_time_ns = 104,
-                        .fall_time_ns = 52,
-                },
-                .i2c[6] = {
-                        .speed = I2C_SPEED_FAST,
-                        .rise_time_ns = 66,
-                        .fall_time_ns = 90,
-                        .data_hold_time_ns = 350,
-                },
-                .i2c[7] = {
-                        .speed = I2C_SPEED_FAST,
-                        .rise_time_ns = 44,
-                        .fall_time_ns = 90,
-                },
+	register "common_soc_config" = "{
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 104,
+			.fall_time_ns = 52,
+		},
+		.i2c[6] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 66,
+			.fall_time_ns = 90,
+			.data_hold_time_ns = 350,
+		},
+		.i2c[7] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 44,
+			.fall_time_ns = 90,
+		},
 
-        }"
+	}"
 
 	device domain 0 on
 		device pci 16.0 off  end     # - I2C 0
@@ -124,34 +124,34 @@ chip soc/intel/apollolake
 				register "has_power_resource" = "1"
 				device i2c 10 on end
 			end
-                        chip drivers/i2c/hid
-                                register "generic.hid" = ""GDIX0000""
-                                register "generic.desc" = ""Goodix Touchscreen""
-                                register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
-                                register "generic.probed" = "1"
-                                register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
-                                register "generic.reset_delay_ms" = "120"
-                                register "generic.reset_off_delay_ms" = "3"
-                                register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
-                                register "generic.has_power_resource" = "1"
-                                register "generic.enable_delay_ms" = "10"
-                                register "hid_desc_reg_offset" = "0x01"
-                                device i2c 5d on end
-                        end
-                        chip drivers/i2c/hid
-                               register "generic.hid" = ""GTCH7503""
-                               register "generic.desc" = ""G2TOUCH Touchscreen""
-                               register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
-                               register "generic.probed" = "1"
-                               register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
-                               register "generic.reset_delay_ms" = "50"
-                               register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
-                               register "generic.enable_delay_ms" = "1"
-                               register "generic.has_power_resource" = "1"
-                               register "generic.disable_gpio_export_in_crs" = "1"
-                               register "hid_desc_reg_offset" = "0x01"
-                               device i2c 40 on end
-                       end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
+				register "generic.has_power_resource" = "1"
+				register "generic.enable_delay_ms" = "10"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 5d on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GTCH7503""
+				register "generic.desc" = ""G2TOUCH Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
+				register "generic.reset_delay_ms" = "50"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 40 on end
+			end
 		end	# - I2C 7
 	end
 
diff --git a/src/mainboard/google/octopus/variants/lick/overridetree.cb b/src/mainboard/google/octopus/variants/lick/overridetree.cb
index 3ade35402f..af6711a5fc 100644
--- a/src/mainboard/google/octopus/variants/lick/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/lick/overridetree.cb
@@ -52,7 +52,7 @@ chip soc/intel/apollolake
 	#| I2C5              | Audio                     |
 	#| I2C6              | Trackpad                  |
 	#+-------------------+---------------------------+
-        register "tcc_offset" = "15"
+	register "tcc_offset" = "15"
 
 	register "common_soc_config" = "{
 		.gspi[0] = {
diff --git a/src/mainboard/google/octopus/variants/phaser/overridetree.cb b/src/mainboard/google/octopus/variants/phaser/overridetree.cb
index b80d0317c8..9ce2a0b2cf 100644
--- a/src/mainboard/google/octopus/variants/phaser/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/phaser/overridetree.cb
@@ -159,18 +159,18 @@ chip soc/intel/apollolake
 				register "hid_desc_reg_offset" = "0x20"
 				device i2c 20 on end
 			end
-                        chip drivers/i2c/generic
-                               register "hid" = ""RAYD0001""
-                               register "desc" = ""Raydium Touchscreen""
-                               register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
-                               register "probed" = "1"
-                               register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
-                               register "reset_delay_ms" = "1"
-                               register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
-                               register "enable_delay_ms" = "50"
-                               register "has_power_resource" = "1"
-                               device i2c 39 on end
-                       end
+			chip drivers/i2c/generic
+				register "hid" = ""RAYD0001""
+				register "desc" = ""Raydium Touchscreen""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
+				register "probed" = "1"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
+				register "reset_delay_ms" = "1"
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
+				register "enable_delay_ms" = "50"
+				register "has_power_resource" = "1"
+				device i2c 39 on end
+			end
 		end	# - I2C 7
 	end