diff options
Diffstat (limited to 'src/mainboard/google/octopus')
3 files changed, 76 insertions, 76 deletions
diff --git a/src/mainboard/google/octopus/variants/bloog/overridetree.cb b/src/mainboard/google/octopus/variants/bloog/overridetree.cb index 0212bea46d..6c2aa95747 100644 --- a/src/mainboard/google/octopus/variants/bloog/overridetree.cb +++ b/src/mainboard/google/octopus/variants/bloog/overridetree.cb @@ -41,44 +41,44 @@ chip soc/intel/apollolake # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps. register "emmc_rx_strobe_cntl" = "0x0b0b" - # Intel Common SoC Config - #+-------------------+---------------------------+ - #| Field | Value | - #+-------------------+---------------------------+ - #| GSPI0 | cr50 TPM. Early init is | - #| | required to set up a BAR | - #| | for TPM communication | - #| | before memory is up | - #| I2C5 | Audio | - #| I2C6 | Trackpad | - #| I2C7 | Touchscreen | - #+-------------------+---------------------------+ + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C5 | Audio | + #| I2C6 | Trackpad | + #| I2C7 | Touchscreen | + #+-------------------+---------------------------+ - register "tcc_offset" = "10" + register "tcc_offset" = "10" - register "common_soc_config" = "{ - .gspi[0] = { - .speed_mhz = 1, - .early_init = 1, - }, - .i2c[5] = { - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, - }, - .i2c[6] = { - .speed = I2C_SPEED_FAST, - .rise_time_ns = 66, - .fall_time_ns = 90, - .data_hold_time_ns = 350, - }, - .i2c[7] = { - .speed = I2C_SPEED_FAST, - .rise_time_ns = 44, - .fall_time_ns = 90, - }, + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[6] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 66, + .fall_time_ns = 90, + .data_hold_time_ns = 350, + }, + .i2c[7] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 44, + .fall_time_ns = 90, + }, - }" + }" device domain 0 on device pci 16.0 off end # - I2C 0 @@ -124,34 +124,34 @@ chip soc/intel/apollolake register "has_power_resource" = "1" device i2c 10 on end end - chip drivers/i2c/hid - register "generic.hid" = ""GDIX0000"" - register "generic.desc" = ""Goodix Touchscreen"" - register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" - register "generic.reset_delay_ms" = "120" - register "generic.reset_off_delay_ms" = "3" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" - register "generic.has_power_resource" = "1" - register "generic.enable_delay_ms" = "10" - register "hid_desc_reg_offset" = "0x01" - device i2c 5d on end - end - chip drivers/i2c/hid - register "generic.hid" = ""GTCH7503"" - register "generic.desc" = ""G2TOUCH Touchscreen"" - register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" - register "generic.reset_delay_ms" = "50" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" - register "generic.enable_delay_ms" = "1" - register "generic.has_power_resource" = "1" - register "generic.disable_gpio_export_in_crs" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 40 on end - end + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" + register "generic.reset_delay_ms" = "120" + register "generic.reset_off_delay_ms" = "3" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" + register "generic.has_power_resource" = "1" + register "generic.enable_delay_ms" = "10" + register "hid_desc_reg_offset" = "0x01" + device i2c 5d on end + end + chip drivers/i2c/hid + register "generic.hid" = ""GTCH7503"" + register "generic.desc" = ""G2TOUCH Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" + register "generic.reset_delay_ms" = "50" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" + register "generic.enable_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 40 on end + end end # - I2C 7 end diff --git a/src/mainboard/google/octopus/variants/lick/overridetree.cb b/src/mainboard/google/octopus/variants/lick/overridetree.cb index 3ade35402f..af6711a5fc 100644 --- a/src/mainboard/google/octopus/variants/lick/overridetree.cb +++ b/src/mainboard/google/octopus/variants/lick/overridetree.cb @@ -52,7 +52,7 @@ chip soc/intel/apollolake #| I2C5 | Audio | #| I2C6 | Trackpad | #+-------------------+---------------------------+ - register "tcc_offset" = "15" + register "tcc_offset" = "15" register "common_soc_config" = "{ .gspi[0] = { diff --git a/src/mainboard/google/octopus/variants/phaser/overridetree.cb b/src/mainboard/google/octopus/variants/phaser/overridetree.cb index b80d0317c8..9ce2a0b2cf 100644 --- a/src/mainboard/google/octopus/variants/phaser/overridetree.cb +++ b/src/mainboard/google/octopus/variants/phaser/overridetree.cb @@ -159,18 +159,18 @@ chip soc/intel/apollolake register "hid_desc_reg_offset" = "0x20" device i2c 20 on end end - chip drivers/i2c/generic - register "hid" = ""RAYD0001"" - register "desc" = ""Raydium Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" - register "probed" = "1" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" - register "reset_delay_ms" = "1" - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" - register "enable_delay_ms" = "50" - register "has_power_resource" = "1" - device i2c 39 on end - end + chip drivers/i2c/generic + register "hid" = ""RAYD0001"" + register "desc" = ""Raydium Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" + register "probed" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" + register "reset_delay_ms" = "1" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" + register "enable_delay_ms" = "50" + register "has_power_resource" = "1" + device i2c 39 on end + end end # - I2C 7 end |