Age | Commit message (Expand) | Author |
2022-03-27 | mb/google/brya/var/banshee: Add mic mute switch setting | Frank Wu |
2022-03-27 | mb/google/brya/variants/baseboard/brask: set GPP_D0 to GPO | Zhuohao Lee |
2022-03-27 | mb/google/brya/var/brya0: Replace amp max98357 with max98360 | Amanda Huang |
2022-03-25 | mb/google/brya: Adjust FMD file to chromeos.fmd for kano | David Wu |
2022-03-25 | drivers/i2c/tpm: Work around missing board_cfg in Ti50 FW under 0.15 | Eric Lai |
2022-03-24 | mb/google/brya/var/gimble: Include 4 new SPDs | Mark Hsieh |
2022-03-23 | mb/google/brya/var/taniks: Increase TSR2 threshold from 40 °C to 70 °C | Joey Peng |
2022-03-23 | mb/google/brya/var/primus{4es}: add delay time to rtd3-cold | Terry Chen |
2022-03-22 | mb/google/brya/var/moli: Fix overridetree | Tim Wawrzynczak |
2022-03-22 | mb/google/brask/variants/moli: init overridetree for moli | Raihow Shi |
2022-03-22 | mb/google/brya/variants/crota: set up gpio | Terry Chen |
2022-03-22 | mb/google/brya/var/kinox: Modify DDR4 to non-interleaved | Dtrain Hsu |
2022-03-22 | mb/google/brya/var/taeko: Disable GL9763e PCIE port L0s | Kevin Chang |
2022-03-22 | mb/google/brya/var/taeko: Enable Genesys L1 max entry delay | Kevin Chang |
2022-03-21 | mb/google/brya/var/banshee: Add WiFi SAR table | Frank Wu |
2022-03-21 | mb/google/brya/vell: Move WWAN devices for vell | Robert Chen |
2022-03-21 | mb/google/brya: Deselect ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTOR | Sridhar Siricilla |
2022-03-18 | mb/google/brya/nivviks/overridetree: update tcss_aux_ori register name | Felix Held |
2022-03-18 | mb/google/nissa/var/nivviks: Add TcssAuxori for nivviks | Usha P |
2022-03-18 | mb/google/brya/var/banshee: Replace amp max98357 with max98360 | Frank Wu |
2022-03-18 | mb/google/brya/var/volmar: Disable thunderbolt | Ren Kuo |
2022-03-18 | mb/google/brya/var/kinox: Reconfigure GPIO settings | Dtrain Hsu |
2022-03-18 | mb/google/brya/var/vell: Change AMP driver setting | Shon Wang |
2022-03-17 | mb/google/brya: Remove mainboard.asl | Eric Lai |
2022-03-17 | mb/google/brya: Remove Pcie Generic driver for WWAN | Cliff Huang |
2022-03-17 | mb/google/brya/var/banshee: Update DPTF parameters | Frank Wu |
2022-03-17 | mb/google/brya/var/kinox: Modify 15W SOC power control setting | Dtrain Hsu |
2022-03-17 | mb/google/brask/variants/moli: set eMMC pin in bootblock | Raihow Shi |
2022-03-17 | mb/google/nissa/var/nivviks: Set gpio override to board_0 | Eric Lai |
2022-03-16 | mb/google/brya/var/kinox: Enable PCIe-eMMC bridge | Dtrain Hsu |
2022-03-16 | mb/google/brya/var/kinox: Modify the DPTF/Fan parameters | Dtrain Hsu |
2022-03-16 | mb/google/brya: set GPP_D0 to GPO | Mark Hsieh |
2022-03-15 | mb/google/brya/var/banshee: Add camera privacy setting | Frank Wu |
2022-03-15 | mb/google/brya: Disable C1-state auto demotion for Brya & Brask | MAULIK V VAGHELA |
2022-03-15 | soc/intel/adl/chip.h: Convert all camel case variables to snake case | MAULIK V VAGHELA |
2022-03-15 | {mb, soc}: Move mrc_cache invalidating logic into `memory` common code | Subrata Banik |
2022-03-15 | {mb, soc}: Change `memcfg_init()` and `variant_memory_init()` prototype | Subrata Banik |
2022-03-14 | mb/google/brya/var/primus{4es}: add eMMC enable pin in ramstage | Casper Chang |
2022-03-14 | mb/google/brya/var/kinox: update overridetree | Dtrain Hsu |
2022-03-14 | mb/google/brya: Set EPP to 45% for all Brya variants | Cliff Huang |
2022-03-14 | mb/google/nissa/var/nivviks: Hook up SD host controller GL9750 | Eric Lai |
2022-03-14 | mb/google/nissa/var/nivviks: Enable pen garage | Eric Lai |
2022-03-10 | mb/google/brask/variants/moli: Change DDR4 Interleave to Non-Interleave | zoey wu |
2022-03-10 | mb/google/brask/variants/moli: Reduce PSysMax to 11 A | Raihow Shi |
2022-03-09 | drivers/wifi,soc/intel/adl: Move CnviDdrRfim property to drivers | Tim Wawrzynczak |
2022-03-09 | mb/google/brya/var/kano: Update TDP PL1, PL2, and PL4 for U28 SKUs | David Wu |
2022-03-09 | mb/google/brya/variants/felwinter: Fix stylus UI behavior bug | John Su |
2022-03-09 | mb/google/brya/var/redrix{4es}: Config VR_DOMAIN_GT's slew rate to 1/8 | Wisley Chen |
2022-03-09 | mb/google/bry/anahera{4es}: Disable TCSS port1 | Wisley Chen |
2022-03-09 | mb/google/brya/var/anahera{4es}: Configure Acoustic noise mitigation | Wisley Chen |
2022-03-09 | mb/google/nissa: Add fmd file for nissa | Krishna Prasad Bhat |
2022-03-09 | mb/google/nissa: Select SOC_INTEL_CSE_LITE_COMPRESS_ME_RW Kconfig | Krishna Prasad Bhat |
2022-03-08 | mb/google/brask/variants/moli: set up gpio | Raihow Shi |
2022-03-08 | mb/google/brya/var/nivviks: Change bluetooth USB2 port from 8 to 10 | Reka Norman |
2022-03-08 | mb/google/brya/var/primus{4es}: add enable pin to rtd3-cold | Casper Chang |
2022-03-07 | mb/google/brya: Enable GPIO PM dynamically based on cr50 FW version | Tim Wawrzynczak |
2022-03-07 | mb/google/brya/var/taniks: Add GL9750 SD card reader support | Joey Peng |
2022-03-07 | mb/google/brya/var/redrix{4es}: Disable TCSS PCIe port1 | Wisley Chen |
2022-03-07 | mb/google/brya/vell: Enable USB2 port for KBD MCU | Daisuke Nojiri |
2022-03-07 | mb/google/brya/var/{brya*,redrix*}: Add DmaProperty for WWAN | Tim Wawrzynczak |
2022-03-07 | mb/google/brya/var/redrix{4es}: Re-enable USB2 port for Bluetooth | Wisley Chen |
2022-03-07 | mb/google/brya: Move ACPI MPTS method from DSDT to SSDT for Brya and Redrix | Cliff Huang |
2022-03-07 | src: Make PCI ID define names shorter | Felix Singer |
2022-03-04 | Revert "mb/google/brya/var/taeko: Fix PLD group order (W/A)" | Kevin Chang |
2022-03-03 | mb/google/brya/var/nivviks: Configure WCAM DMIC data pin | Reka Norman |
2022-03-03 | mb/google/brya: Change "mainboard: EC init" loglevel prefix | Ian Feng |
2022-03-03 | mb/google/brya/var/vell: Change to ELAN touchpanel driver | Shon Wang |
2022-03-02 | mb/google/brya/var/kinox: update gpio settings | Dtrain Hsu |
2022-03-02 | mb/google/brya: enable the SPD_CACHE_ENABLE | Zhuohao Lee |
2022-03-02 | mb/google/brya/variants: add the smbus addr for dimm1 | Zhuohao Lee |
2022-03-02 | mb, soc: Add the SPD_CACHE_ENABLE | Zhuohao Lee |
2022-03-02 | mb/google/brya/var/vell: Remove Rcomp settings | Gaggery Tsai |
2022-03-02 | mb/google/brya/var/primus{4es}: modify GPP_B3 as unlocked | Casper Chang |
2022-02-28 | mb/google/brya/var/kano: add enable_off_delay_ms to 30 | David Wu |
2022-02-28 | mb/google/brya/var/kano: Add wifi sar table | David Wu |
2022-02-25 | mb/google/brask: Update PCH power cycle related durations | Zhuohao Lee |
2022-02-25 | mb, soc: change mainboard_memory_init_params prototype | Zhuohao Lee |
2022-02-24 | mb/google/brya/var/taeko: Add GL9750 SD card reader support | Kevin Chang |
2022-02-24 | mb/google/brya: Add SPD configs for Crota | Terry Chen |
2022-02-24 | mb/google/brya/var/vell: Corrects ACPI _PLD macro setting | Robert Chen |
2022-02-24 | mb/google/brya/var/anahera{4es}: Add MT53E2G32D4NQ-046 WT:C support | Wisley Chen |
2022-02-24 | mb/google/brya/var/redrix{4es}: Add MT53E2G32D4NQ-046 WT:C | Wisley Chen |
2022-02-21 | mb/google/brya: Enable eMMC HS400 mode for nissa | Reka Norman |
2022-02-21 | mb/google/brya/variants/felwinter: Adjust I2Cs CLK to be around 400 kHz | John Su |
2022-02-18 | mb/google/brya: remove the delay from for WWAN _ON method. | Cliff Huang |
2022-02-18 | mb/google/brya/redrix{4es}: Disable unused USB2/TCSS ports | Wisley Chen |
2022-02-18 | mb/google/brya/var/{redrix, redrix4es}: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/felwinter: Update DPTF parameters for Felwinter | John Su |
2022-02-18 | mb/google/brya/var/vell: Correct MIPI camera info | Shon Wang |
2022-02-18 | mb/google/brya/var/volmar: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/vell: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/taniks: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/{taeko, taeko4es}: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/{primus, primus4es}: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/kano: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/{gimble, gimble4es}: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/felwinter: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/{brya0, brya4es}: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/{anahera, anahera4es}: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/agah: Use ACPI _PLD macro | Subrata Banik |