| Age | Commit message (Collapse) | Author |
|---|
|
When both CRB and pc80 TPM drivers are compiled in, building fails
because the tpm_config_t typedef has two incompatible definitions.
Given that typedefs are discouraged by the project's coding style,
simply get rid of the tpm_config_t typedef.
TEST=Compile MSI PRO Z690-A target with CRB and PC80 TPM chips enabled
in devicetree.
Change-Id: Id41717e265362303a17745303a907c9c8f4f4e12
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82057
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clock Power Management, ASPM and L1 Substates have been
configured the same way since Skylake. The main control to
enable or disable is Kconfig, and then the level can be overridden
in devicetree.
Despite the UPDs remaining the same since Skylake, this is not the
case for Alder Lake, Raptor Lake and Meteor Lake.
Taking `starlabs/starbook` as an example, at the time of this
commit it has PCIEXP_CLK_PM, PCIEXP_ASPM and PCIEXP_L1_SUB_STATE
enabled.
On Comet Lake, this results in the correct configuration, verified
with the lspci command:
```
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <8us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
```
On Raptor Lake:
```
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
```
Clock Power Management, ASPM and L1 Substates are also not configured
for CPU root ports.
Add helper functions to configure these correctly based on Kconfig, but
retain the capability to override the specific levels from devicetree.
Change-Id: I9db18859f9a04ad4b7c0c3f7992b09e0f9484a81
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81638
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_vs`:
* Windows 11
* Ubuntu 22.04
* Manjaro 22
No known issues.
https://starlabs.systems/pages/starlite-specification
Change-Id: I8724e578c21353032b844b20b868348580ff561b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add pad_own_reg_0 to `struct pad_community`. Pad ownership indicates
whether the GPIO is owned by host or Intel Management Engine. If owned
by host, then host ownership indicates whether the GPIO is owned by ACPI
or driver.
Change-Id: I30a934fd00a7a42cb156341da1954e4e4b1231d8
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83315
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CPU and PCIe IDs are from Intel Atom Processor C5100, C5300,
P5300 and P5700 Product Families EDS, doc No. 575160 rev 2.0.
Change-Id: I3f5d612765bbe9adffe0b6c7a4151f32b33e88b4
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83314
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I333b137c1dc08a3c06bdd3f7a78ca44a5dd043cc
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83192
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Depending on how firmware image was passed to QEMU, it may behave as:
- ROM - memory mapped reads, writes are ignored (FW image mounted with
'-bios');
- RAM - memory mapped reads and writes (FW image mounted with e.g.
'-device loader');
- flash - memory mapped reads, write and erase possible through
commands. Contrary to physical flash devices erase is not required
before writing, but it also doesn't hurt. Flash may be split into
read-only and read-write parts, like OVMF_CODE.fd and OVMF_VARS.fd.
Combined size of system firmware must not exceed 8 MiB by default
(FW image(s) mounted with '-drive if=pflash').
This function detects which of the above applies and fills
region_device_ops accordingly.
Tested by starting QEMU with firmware passed as '-drive if=pflash',
'-drive if=pflash,readonly=on' and '-bios'. When started with firmware
passed through '-device loader', coreboot complains about corrupted
FMAP, but this is the same behavior as without this change:
[ERROR] Invalid FMAP at 0x40000
[EMERG] Cannot locate primary CBFS
Writable pflash support was added about 17 years ago, so it should be
supported by all QEMU versions currently in use. Since QEMU 5.0.0 it is
possible to change the limit of firmware size with `max-fw-size` machine
configuration option, up to 16 MiB, as bigger sizes would overlap with
default IO APIC memory range.
Change-Id: I3ab9f22c6165064a769881d4be5eab13a0a2f519
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82555
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
Since most targets support clang it's easier to reverse the semantics of
the Kconfig options.
Change-Id: Ib28e7a4cb286b9f8b05be94dae3947179f43c746
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
This patch move keymap size calculation inside of
has_alpha_num_punct_keys condition. When the condition is not met,
it can prevent total keymaps size calculate incorrectly.
BUG=none
TEST=emerge coreboot pass
Change-Id: I3dcf31d89924c1a8f2768e42065761b361e9ca41
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update GPIOs for WWAN and USB Camera functions.
BUG=b:341188351
TEST=Build and verify on jubilant
Change-Id: I145aa994767ddc59be519b96017af71badf82734
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
|
|
Define ISH main firmware name so ISH shim loader can load firmware
from file system.
BUG=b:354607924
TEST=Boot trulo board, check that ISH is enabled and loaded
lspci shows: 00:12.0 Serial controller: Intel Corporation Device 54fc
Change-Id: Id60cb416a1cce5407bd483f0ce54f477584459b1
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83671
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Match PCIe root port allocation and associated comments to
boardview, as follows:
Z77 PCIe ports 1-4: PCIEX16_3 (x4)
Z77 PCIe port 5: PCIEX1_1
Z77 PCIe port 6: RTL8111F LAN
Z77 PCIe port 7: ASM1042 USB3
Z77 PCIe port 8: ASM1061 eSATA
CPU PCIe lanes 1-8: PCIEX16_1
CPU PCIe lanes 9-16: Multiplexed via 4x ASM1480 to PCIEX16_1 lanes 9-16
and PCIEX16_2 lanes 1-8
(CPU PCIe lanes are not covered by overridetree.cb.)
These are not hardware tested.
Change-Id: I472e28add254ea945b401d1ddfd03f29f46d8fd2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The ID for X10SLM+F is 0811 as reported by Knogle on IRC.
Change-Id: Ie58aad50e66efbc3113541884beea9668d886b5d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The compressing and decompressing functions return 0 on success and not
the other way around.
Change-Id: I9f8653aa805c62eb4bfc3560d7880921830c2c59
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83616
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because Awasuki doesn't have SD card, disable related configurations.
BUG=b:351968527
TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki
Change-Id: I1b0d2a9c2f9cdd4bca7c30cdc454ffa84b293146
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83706
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The PSP can send SMIs to the x86 side to have the SMI handler service
requests from the PSP. This commit adds an empty PSP SMI handler; the
actual implementation is added in later patches to keep the patches
relatively small.
This patch is a slightly modified version of parts of CB:65523.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I65989ff529d728cd9d2cd60b384295417bef77ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83739
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BRANCH=None
BUG=b:348171026
TEST=Test on TI PDC device
Cq-Depend: chromium:5691079
Cq-Depend: chromium:5691080
Cq-Depend: chrome-internal:7464767
Original-Change-Id: I6ffb8bdb2245a74b0d5270435d0ffc8a44e7c2a6
Original-Signed-off-by: Bob Moragues <moragues@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/5691110
Original-Reviewed-by: YH Lin <yueherngl@chromium.org>
Change-Id: Iac5b4cd4dcb1d274553f78e9d4295f8f9ad8a863
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
For Sandy/Ivy Bridge boards, this results in northbridge devices ending
up north of (above) southbridge devices. Which is the convention pretty
much all boards in the tree uses.
Change-Id: I9dc2ff13182ff9d92141b1736796749cea49d23a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Running autoport as root has the annoying side effect of making all
generated files owned by root. Prevent this by using sudo to invoke
log-making programs (lspci, dmidecode, acpidump, inteltool, ectool,
superiotool). These programs either need to be run as root or allow
collecting more information if run as root (lspci).
In case there's a valid reason not to use sudo, provide a prompt to
let autoport run the programs directly, as it originally did. There
might be someone trying to run autoport from an OS that lacks sudo.
Change-Id: I4bf4ddf8dd2cb930e9b7303e2ea986d8c072aa7a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The original approach to call external programs was rather convoluted
and would fall back to running executables inside the current working
directory if running them from the location specified in the code did
not succeed, swallowing any errors from the first invocation.
Rewrite the system around the `LogMakingProgram` concept, a struct to
represent a program. Each program has a name, prefixes to try running
it from and the arguments to pass to it (if any). Plus, collect error
information from failed executions, but only show it when none of the
prefixes resulted in a successful invocation.
In addition, look for programs in PATH instead of CWD: it is unlikely
that all utils will be in the CWD, but utils can be in the PATH after
one installs them (`sudo make install`). For coreboot utils, look for
them in the utils folder first as the installed versions might not be
up-to-date.
Furthermore, print out the command about to be executed, as there are
some commands (e.g. `ectool` on boards without an EC) that can take a
very long time to complete.
Change-Id: I144bdf609e0aebd8f6ddebc0eb1216bedebfa313
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82403
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently resource allocation starts top down from the default value
0xfe000000. This does not match what ACPI reports, so adapt
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT to reflect that.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I2ba0e96a7ab18d65b7fbbb38b1a979ea2ec6d1be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch introduces the following changes,
- Remove TCSS XHCI (USB 3.x) devicetree settings
- Update Over Current (OC) & USB 2.0 config
- Update TCSS-XHCI capabilities
BUG=b:348332200
TEST=Able to build google/nova and ensure lsusb can list genesys
hub device.
Change-Id: I4b4025bea41f67224ac35ff2077b1394f2c3e380
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83707
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the PMC MUX related setting from devicetree as Nova
doesn't include a MUX for it's USB-C port.
BUG=b:348332200
TEST=Able to build google/nova
Change-Id: I23a949ba9b598d7a86c6f8b08a2821651978e489
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Fix potential undefined behaviour in the `get_pkg_power()` function:
- If `rapl_power_unit == 0`, `pkg_power_info / rapl_power_unit` is
invalid
- If `rapl_power_unit > 7`, the result of the shift doesn't fit into a
`uint8_t`
Signed-off-by: Mate Kukri <km@mkukri.xyz>
Change-Id: I48ef59c4fbeb0a55675ac24da31e6e0b194cb58d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83736
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
UART0 is already configured in coreboot, so this change sets SerialIo
config for UART0 to PchSerialIoSkipInit to skip initialization in FSP.
BUG=none
TEST=Able to build and boot google/rex0. Able to see all debug prints
over CPU uart.
Change-Id: I37744f05083eb82ba8ca579b628b69aa976e3d1f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83750
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently we use "%p" to print the address, which results in different
string lengths, depending on the value of the address. To improve
readability of the printed addresses in the log, change the format to
"0x%013lx", so that the length of the printed addresses will be
consistent.
In addition, print the level of the translation table when setting up a
new table.
Example log:
Backing address range [0x0000000000000:0x1000000000000) with new L0 ...
Mapping address range [0x0000000000000:0x0000200000000) as ...
Backing address range [0x0000000000000:0x0008000000000) with new L1 ...
Mapping address range [0x0000000100000:0x0000000130000) as ...
Backing address range [0x0000000000000:0x0000040000000) with new L2
Backing address range [0x0000000000000:0x0000000200000) with new L3
Mapping address range [0x0000000107000:0x0000000108000) as ...
Mapping address range [0x0000000200000:0x0000000300000) as ...
Backing address range [0x0000000000000:0x0000000200000) with new L3 ...
BUG=none
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: Ib29c201e1b096b9c7cd750d2541923616bc858ac
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
These formats are already included in memlayout.ld.
Change-Id: I89d226440308ce3fbe00382698dcd8c88863e694
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Clang does not work that well as a linker for the header as it will
default to other linkers which do not work well here. Instead just use
the linker directly.
Change-Id: Id6ba42b470349a4b138a65b2a037f16a65982ef7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The patch enforces CSE sync when the GBB flag GBB_FLAG_FORCE_CSE_SYNC is
enabled and the system is currently booting from the RO section.
Additionally, it integrates forced CSE sync into eSOL decision-making.
BUG=b:353053317
TEST=Verified forced CSE sync on rex0 with GBB 0x200000
Cq-Depend: chromium:5718196
Change-Id: I228bc8ebf58719776f6c39e0bfbb7ad53d9bfb7f
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds a GBB flag to coreboot, which, when enabled, enforces
CSE sync even if the current CSE version matches the version in CBFS.
The CSME sync GBB and flag are designed to enhance autotest
functionalities and are not intended or recommended for use in
developing any other features.
BUG=b:353053317
TEST=futility gbb --help
Cq-Depend: chromium:5718196
Change-Id: I6352959e1e898a90b4c6e12a22f8d6513f90ded9
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83685
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 4b12d392e5b1:
scripts: Add a script to convert a vbprivk to a PEM
to commit id f1f70f46dc54:
2lib: Add gbb flag to enforce CSE sync
-Subproject commit 4b12d392e5b12de29c582df4e717b1228e9f1594
+Subproject commit f1f70f46dc5482bb7c654e53ed58d4001e386df2
Change-Id: I2c5b603ce5ea49e6c1aec293960184d84eedd1e7
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The ROTM method should return a package:
```
Name (RBUF, Package (0x03)
{
"0 1 0",
"1 0 0",
"0 0 1"
})
Return (RBUF)
```
Adjust the acpigen to do this.
Change-Id: Id493f6955c1d0dc3449402262a8575091a828226
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Clang builds (bootblock: 20800 bytes) are slightly larger than GCC
builds (bootblock: 18688 bytes) so increase the size of both bootblock
and romstage.
The technical reference manual mentions no upper limit to the size of
the bootblock in the TI header so increasing the bootblock size is
allowed.
To be able to link the clang bootblock increase it from 20K to 22K.
Change-Id: I8719bc3728d4cc8dba8d939cc154c3fc0884d47b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I2fd6e8fcebd194da03ba3f264ee89037ca11769a
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83746
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The previous uploaded verb table is not fully applied due to
configuration error. Uploaded the verb table provided by Realtek which
can be found in b:336967284.
BUG=b:326412504, b:336967284
TEST=deploy and check volume
Change-Id: Ib9a8248c4a437fd204f40918d801a4a010a5c4df
Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Terry Cheong <htcheong@chromium.org>
|
|
DC offset of class-D amplifier is 7mV in Brox which is larger than the expected 3mV.
Add a section in the verb table to enable class-D calibration based
on the updated verb table provided by Realtek in b:342506575 comment#6.
This improves the offset to be less than 1mV.
BUG=b:342506575
BRANCH=main
TEST=Verify DC offset of speaker amplier output is less than 1mV with a multimeter when \
playing -100dB sine waves.
Change-Id: I776f5c24ce3c829cbd64840957c1431608cf2b85
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Create the jubilant variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:348543712
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_JUBILANT.
Change-Id: Ic54437697058f8bce2167093bd88c0880d1b7cac
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83212
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
The PSP can send SMIs to the x86 side of the system. Add helper
functions to configure and to reset the PSP SMI generation. Since
Stoneyridge also selects SOC_AMD_COMMON_BLOCK_SMI, add the SMITRIG0_PSP
define and rename SMITYPE_FCH_FAKE0 to SMITYPE_PSP in its SoC-specific
smi.h to bring it in line with the newer SoCs.
This patch is split out from CB:65523.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I525a447c9a75fdb95b9750e85a02896056315edf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83702
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to detect more issues in our code, make GCC more picky by
enabling -Wextra. Disable a couple of warnings turned on by -Wextra
temporarily in order to keep everything compiling and working for now.
The warnings may be enabled step by step later.
Since xcompiles applies to coreboot and libpayload, add Wextra here
instead of the top-level Makefile.mk.
Change-Id: I60915cb66581dc2c9b6807335fd0e214b45e76d6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83347
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3c4a963b233f549c7a76c76333af87c887550ac3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The Windows drivers require the subsystem ID to match on the PCI
device, so set these to allow the driver to install.
Change-Id: I01b36554d5322018efc72734a8e749cc06263577
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83621
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SMRAMC, C_BASE_SEG, G_SMRAME, D_LCK, D_CLS, D_OPEN, ESMRAMC, T_EN,
TSEG_SZ_MASK and H_SMRAME are already defined in included "q35.h" file.
Change-Id: Ic3c01cca14749f77adecc327a78ac011ba3f4c0b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83429
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
"0x1502 F81804 chipset ID, same for F81966" in
https://web.archive.org/web/20240628153609/https://github.com/torvalds/
linux/blob/master/drivers/gpio/gpio-f7188x.c
Change-Id: I6889ad8ad861465316333ff997956a05b74c5855
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83018
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
acpigen_write_pci_root_port writes SSDT device objects for PCIe
root port, _ADR and _BBN are provided. SSDT objects for direct
subordinate devices will also be created (if detected), _ADR and
_SUN are provided.
TEST=Build and boot on intel/archercity CRB
Change-Id: I434fea7880a463c2027abfa22ba2b3bb985815c0
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Create the teliks variant of the nissa reference board by copying
the anraggar files to a new directory named for the variant.
BUG=b:352263941
BRANCH=None
TEST=1. util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TELIKS
2. Run part_id_gen tool without any errors
Change-Id: I744f4d7c2d35544d3a8a8f76e24bad3298442768
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83408
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch supports keyboards that have delete key but without
numpad.
To prevent KEY_DELETE be defined twice, move it from
numeric_keypad_keymaps to rest_of_keymaps.
BUG=b:345231373
TEST=Build and test on Riven/Craaskino, delete key function
works
Change-Id: Ib922a2b52fa7152ba3d9deb44e2c8200b2a3802c
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83684
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I4a24fb69ebec87f65b679cde0e4a1a8827cd365d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83722
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Since the P2C_BUFFER_MAXSIZE value will be needed in another compilation
unit, move the define to the common psp_def.h. P2C_BUFFER_MAXSIZE is
moved there too for consistency reasons.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d4d93760c90ad6e0ecadf70600b1d697a02fa82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83701
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When sending mailbox commands to the PSP from SMM, the SMM flag needs to
be set right before sending the mailbox command and cleared right after
the command is sent. In order to not have this code duplicated, factor
it out into a function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3628463dece9d11703d5a068fe7c604108b69c1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The reasoning behind this and the positive side effects of this aren't
too clear from the code, so point those out in a comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4f4121031fc1ef600cdf5551f61f1ef4e03b56a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since it's not exactly obvious what 'c2p_buffer', 'p2c_buffer' and
'smm_flag' are used for, add comments to those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4ec092a92fe9f0686ffb7103e441802fc05381f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Rename the 'domain' element of the 'domain_path' struct to 'domain_id'
to clarify that this element is the domain ID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3995deb83a669699434f0073aed0e12b688bf6e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83677
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
To avoid having constructs like 'dev->path.domain.domain' in the SoC
code, create the 'dev_get_domain_id' helper function that returns the
domain ID of either that device if it's a domain device or the
corresponding domain device's domain ID, and use it in the code.
If this function is called with a device other than PCI or domain type,
it won't have a domain number. In order to not need to call 'die',
'dev_get_domain_id' will print an error and return 0 which is a valid
domain number. In that case, the calling code should be fixed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d79f19846cea49609f848a4c42747ac1052c288
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83644
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In accordance with the F81962/F81964/F81966/F81967 datasheet:
Release Date: Feb, 2018, Version: V0.18P [1].
[1] https://web.archive.org/web/20240707052102/http://
www.jetwaycomputer.com/download/Fintek/F81966_wdt_gpio.zip
Change-Id: Ic3418c337883538e47eb181cbe1ad2dc828e12a1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In accordance with the F81866A datasheet:
Release Date: Jan, 2012, Version: V0.14P [1].
[1] https://web.archive.org/web/20240707051837/http://www.
jetwaycomputer.com/download/Fintek/F81866_wdt_gpio.zip
Change-Id: I4367a1129fe628e7bf05d49678ea1c3718da710b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83004
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some chips (fintek [1,2]) have registers with specific selector-fields
that can affect the address space of the device (for example, switch the
register bank). At the same time, these registers contain fields that
should not change after they are configured in BIOS (for example, set
the port to 2E/2F or 4E/4F). In this case, the selector should take into
account the mask of the register fields and there is no convenient and
easy way to add this in the code in the utility. The selector-fields
should be set manually before the dump and this action is done several
times.
This patch adds an extra-selector mechanism that allows superiotool to
make a correct dump in automatic mode.
Just add a structure with an index, mask, and value for the selector
inside the superio_registers chip for the corresponding LDN to switch
the register bank:
{FINTEK_F81966_DID, "F81962/F81964/F81966/F81967", {
* * *
{NOLDN, "Global",
{0x28,0x2a,0x2b,0x2c,EOT},
{0x00,0x00,0x00,0x00,EOT},
{.idx = 0x27, .mask = 0xd, .val = 0x1} /* update extra selector */
},
{0x03, "LPT",
{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
{NANA,0x03,0x78,0x07,0x03,0xc2,EOT} /* without extra selector */
},
* * *
Tested with Fintek F81966 on Asrock IMB-1222:
- run superiotool on Ubuntu and dump the registers for the board with
the vendor's firmware;
- add the superio chip initialization code to the board configuration
in coreboot and build the project;
- boot Ubuntu on the board with coreboot and re-dump the registers;
- the register values from the board configuration code are the same
in both dumps.
Found Fintek F81962/F81964/F81966/F81967 (vid=0x3419, id=0x0215) at 0x2e
(Global) -- ESEL[27h] 0x00 (Port Select Register) --
idx 02 07 20 21 23 24 25 26 27 28 29 2a 2b 2c 2d
val 00 0b 15 02 19 34 5a 23 80 a0 f0 45 02 e3 2e
def NA 00 15 02 19 34 00 23 02 a0 00 00 02 0c 28
* * *
The changes do not affect the configuration of existing chips, which
was tested on the Asrock H110-STX motherboard with Nuvoton NCT5539D
(the dump before and after the changes are the same).
[1] CB:83004
[2] CB:83019
Change-Id: If56af9f977381e637245bdd26563f5ba7e6cbead
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83196
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
During the stages which use Cache-as-RAM (CAR), coreboot needs more than
1 KiB as configured in DCACHE_BSP_STACK_SIZE. After studying the UPDs
for various SoCs(ADL-P, ADL-N, RPL), coreboot stack requirement is
estimated to be 32 KiB. Update DCACHE_BSP_STACK_SIZE accordingly.
BUG=None
TEST=Build Brox BIOS image and boot to OS.
Change-Id: I723ba1f4289c393fe7376f989d760b26e75b33da
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83680
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch drops fw_config probing for ISH because ISH IP should
remains on by default for all Trulo variants.
Additionally, removed the redundant ISH entries from variant
override devicetree.
BUG=b:354607924
TEST=Able to verify ISH PCI Device is available while booting eMMC sku.
```
lspci
00:00.0 Host bridge: Intel Corporation Device 461c
...
00:12.0 Serial controller: Intel Corporation Device 54fc
...
00:1a.0 SD Host controller: Intel Corporation Device 54c4
```
Also, able to enter S0ix with this patch.
```
> suspend_stress_test -c 1 --ignore_s0ix_substates
At AP console:
s0ix errors: 0
s0ix substate errors: 0
s0ix pc10 errors: 0
At EC console:
power state 5 = S0ix, in 0x38d87
```
Change-Id: Ic1e415ec848ac91a9bbf21b26597f4e6b5f7a1f5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83695
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce PchPmSlpAMinAssert (pch_slp_a_min_assertion_width) to minimum
time (98ms) from 2sec.
BUG=b:349595391
BRANCH=firmware-brya-14505.B
Test=Verified on xol
Change-Id: Ia4b7b7ab5dc9afeb3505dfd2b42d0d397aed7a5c
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83683
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Streamline variant-level overrides by removing redundant entries that
already exist in either the SoC-level or the platform-level configurations.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: I0b28354dfb865900a78a9d0738e00aa952eade0e
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Idcdd3e2525b621310aaf43608fd5fede8133d16a
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83675
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Chip Direct Mapping is exclusive to Windows; it allows specifying the
position where a chip is mounted. There are 8 positions and a _CDM
method should return 0xabcd0X, where X is the position.
Tested by booting Windows 11 on the StarLite Mk V, rotating the device
and checking the orientation is correct, where previously, it was
inverted.
Change-Id: If70c25288d835df7064b4051c43abeb2d6531f3b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81409
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The comment for the BOOTBLOCK region should be written right above the
BOOTBLOCK declaration.
BUG=b:317009620
TEST=none
BRANCH=none
Change-Id: I7afdf74844a9d97169b4e4a23c3c9c6060e886d9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83649
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 59ee65d271c7c617bcc240019231da4f0bd04db6.
Reason for revert:
- Usb4CmMode & CnviWifiCore Upds are available starting with TWL FSP
version v5222.01. Therefore, no special handling is required.
BUG=b:330654700
TEST=Able to build google/tivviks.
Change-Id: I3c74ec5b9924e88a26984fe8d3275ba80edb14ab
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
This change adds a new USB2 Bluetooth device configuration on Port 10
for the Trulo variant.
* A new `drivers/usb/acpi` chip is added with:
* `desc` set to "USB2 Bluetooth"
* `type` set to "UPC_TYPE_INTERNAL"
* `reset_gpio` set to "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)"
* `device` referencing `usb2_port10`
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9a92a4d008eb4d0c339079ecbbb77facece435ba
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Trulo variant.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9970274b9b1b1076a2f9d649d61c825cac71d0c7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83665
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Orisa variant.
It also cleans up a redundant newline before the `serial_io_i2c_mode`
definition.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: Icf1ff442530ad2263ad0b58829e5c7b2ce544439
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83664
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This patch moves the configuration for integrated Bluetooth
functionality (USB2 Port 9) from Orisa variant to the Trulo baseboard.
This change is necessary to support the CNVi BT module on Trulo
variants. The configuration is skipped for Orisa.
Trulo: USB2 Port 9 is now configured as USB2_PORT_MID(OC_SKIP) to
support the CNVi BT module.
Orisa: The previous configuration of USB2 Port 9 as a Bluetooth port for
CNVi WLAN has been removed.
This change ensures proper Bluetooth connectivity is applicable for all
Trulo variants including Orisa and Trulo.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I760a82cb6f6c98db7249caf1ba7e6d6c5dc8f2c4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83663
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices.
2. Update fw_config probe to enable/disable devices in devicetree.
3. Disable eMMC controller incase STORAGE_UFS or STORAGE_NVME fw_config
is enabled.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: Id3a22aa2206e86fdca6f6fadbc849572890fee58
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83657
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for
Orisa variant which intends to achieve a unified AP firmware
image across UFS and non-UFS skus.
BUG=b:345112878
TEST=Able to enter S0ix on Orisa eMMC sku after disabling UFS
during boot path.
Change-Id: I969b0c0c785ed4c408f6fc6de71e7d0c1a1ea27c
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Also take the chance to sort the headers.
BUG=none
TEST=none
BRANCH=none
Change-Id: I9d487a40d0c58c6458b8b7d32b6401093fa417e7
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83651
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
- Add Usb4CmMode & CnviWifiCore Upd support in FspsUpd.h
- Update UPD Offset in FspsUpd.h
BUG=b:354612775
TEST=Able to build and boot google/Tivviks
Change-Id: Ia68b6aa90c782a359b594f381e223772a897c6e6
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for
Google/Trulo variant which intends to achieve a unified AP firmware
image across UFS and non-UFS skus.
Note: Enabling this config would introduce an additional warm reset
during the cold-reset scenarios due to the function disabling of the
UFS controller as results we are expecting ~300ms higher boot time
(which might not be user visible because `cbmem -t` can't include
impacted boot time due to in-between resets).
BUG=b:355384185
TEST=Able to enter S0ix on Trulo eMMC sku after disabling UFS
during boot path.
Able to grep below debug prints while booting the eMMC sku.
[INFO ] FW_CONFIG value from CBI is 0x20000000
[INFO ] Disabling UFS controllers
...
[INFO ] fw_config match found: STORAGE=STORAGE_EMMC
Change-Id: I06a84fa8c3843edae5932e19d394b18b72ace422
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83654
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
|
|
TEST=Able to build google/rex.
Change-Id: I0de87a2ff5ecb37f00ec745ad930e83f6356a3fe
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83637
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
System76 EC since system76/ec@80cfa91b9fd5 ("acpi: Report RPM values
instead of raw tachometer values") performs the RPM calculation itself
and stores it in EC RAM where previously the raw tachometer values were
saved. The SBIOS is no longer required to make the conversion.
Change-Id: I82a4e25a8ce0f274b2d98e7ff2b12595acf6c3c5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Not setting tcss_aux_ori in devicetree is the same as
setting it to zero so remove it.
Change-Id: Ia0e90179dd05b23f1f36935be51327250c5a8684
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Currently we include a header file from the opensbi submodule.
That causes some issues, since we merge outside code with our own.
Most recently there have been made attempts to make the coreboot
codebase C23 ready. The code that we include from opensbi however causes
the build to fail, since it is not C23 ready.
This patch effectivily detaches the coreboot codebase from the opensbi
codebase and just copies the structure and definitions that we need from
opensbi into coreboot.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I9d8f85ee805bbbf2627ef419685440b37c15f906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83641
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a helper function to read the reg property from an unflattened
device tree.
It also factors out the common code into a new function called
`read_reg_prop`.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I7846eb8af390d709b0757262025cb819e9988699
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update wake-up type, mainboard feature flags and enclosure type.
All other info are used from src/lib/smbios_defaults.c
Change-Id: I8a7d4958171df121e2cd3acb3a71554c695d64ab
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Update wake-up type, mainboard feature flags and enclosure type.
All other info are used from src/lib/smbios_defaults.c
Change-Id: I8e68c057fefa1d408fb8d69fef066cb573c929a4
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83328
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add sample DIMM slot configuration table for avenuecity CRB
and beechnutcity CRB. This table will be used to fill SMBIOS
type 17 table.
TEST=Boot on intel/avenuecity CRB
It will help to update Locator, Bank Locator and Asset Tag
with the value described in dimm_slot_config_table
Change-Id: I53556c02eb75204994a1bcb42eccb940e83bd532
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change increases the DCACHE_BSP_STACK_SIZE from 512KB + 1KB to
512KB + 32KB, addressing a requirement specified by coreboot where
stack usage is higher than 1KB alone.
BUG=None
TEST=None
Change-Id: Iba3620b3b7c470176330f5e07989cd3f6238713e
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83540
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I1888fedcc66ae13c76331d3f2f4465197ae51d35
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
In order to clean up a bit, drop devices which are equivalent to the
ones from chipset devicetree.
Change-Id: I92765b404508901c7e84fad0bca30489cf69abac
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83456
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The chromeec submodule is the largest submodule being pulled into the
coreboot tree, at over 400MB. The main branch also contains the majority
of these commits, so restricting it to a single branch still fetches
over 350MB.
Because there is only a single mainboard directory that enables the
build of the chromeec codebase by default, most people are fetching this
repo for no reason.
Based on this, we're going to change the way that the chromeec submodule
is used, fetching it the way we currently fetch external payloads. This
gives us 2 large advantages:
1) Only builds that actually need the chromeec repo will pull it down.
2) Each board that wants to build the chromeec codebase can use a
different commit, unlike submodules which all use the same "current"
commit.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I357c4c9b506dd3817a308232446144ae889bc220
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Since the EC and PD firmware sources are now limited to two options -
'none' and 'external' - drop the choice selection and make the
EC and PD external options independent.
TEST=build google/lulu with external EC binary using existing defconfig
Change-Id: Ie37ff3a188b414fd099fbb344858bca4df419086
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83639
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation for dropping the Chrome-EC submodule, remove the ability
for Chrome-EC and PD components to be built as part of coreboot.
These components have not been used or buildable for many years.
Change-Id: Ibf6bd43e755cf5b4d2aa8a42f38dc52e7023e9b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83638
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Now that we have a get_psp_mmio_base function that will work on all SoCs
that use the psp_gen2 code, we can move back to accessing the PSP
registers via their MMIO mapping. This sort-of reverts
commit 198cc26e4951 ("soc/amd/common/block/psp/psp_gen2: use SMN access
to PSP").
When doing SMN accesses from the SMI handler after the OS has taken over
ownership of the platform, there's the possibility to cause trouble by
clobbering the SMN access index register from SMM. So that should be
either avoided completely or the SMI code needs to save and restore the
original contents of the SMN index register.
The PSP MMIO base will be set up by the FSP before the resource
allocation in coreboot and be treated like a fixed resource by the
allocator. The first SMI where corresponding handler calls
'get_psp_mmio_base' happens when ramstage triggers the APM_CNT_SMMINFO
SMI right after mpinit which happens after the resource allocation. So
the PSP MMIO base address is expected to be configured and so the
'get_psp_mmio_base' function will cache the base address and won't need
to do any SMN access in subsequent calls that might happen after the OS
has take over control.
This isn't currently an issue, since the only PSP mailbox command from
the SMI handler after coreboot is done and the OS has taken over will
be during the S3/S4/S5 entry, and this will be triggered by the OS as
the last step after it is done with all its preparations for suspend/
shutdown. There will however be future patches that add SMI-handlers
which can send PSP mailbox commands during OS runtime, and so we have
to make sure we don't clobber the SMN index register.
TEST=PSP mailbox commands are still sent correctly on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I25f16d575991021d65b7b578956d9f90bfd15f6c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83448
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This sort-of reverts commit 00ec1b9fc7ba ("soc/amd/common/block/psp/
psp_gen2: simplify soc_read_c2p38") and is done as a preparation to
switch back to using the MMIO access to the PSP mailbox registers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icca3c7832295ae9932778f6a64c493e474dad507
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add get_psp_mmio_base which reads the PSP MMIO base address from the
hardware registers. Since this function will not only be called in
ramstage, but also in SMM, we can't just look for the specific domain
resource consumer like it is done for the IOAPICs in the northbridge,
but have to get this base address from the registers. In order to limit
the performance impact of this, the base address gets cached in a static
variable if an enabled PSP MMIO base register is found. We expect that
this register is locked when it was configured and enabled; if we run
into the unexpected case that the PSP MMIO register is enabled, but not
locked, set the lock bit of the corresponding base address register to
be sure that it won't change until the next reset and that the hardware
value can't be different than the cached value.
This is a preparation to move back to using MMIO access to the PSP
registers and will also enable cases that require the use of the MMIO
mapping of the PSP registers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d51e30f186508b0fe1ab5eb79c73e6d4b9d1a4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The PSP code introduced in a following patch needs both SoC-specific
functions get_iohc_info and get_iohc_non_pci_mmio_regs to also be
available in SMM, so add those compilation units to the corresponding
target.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4e32084b45f07131c80b642bc73d865fc57688a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Instead of implementing the functions get_iohc_misc_smn_base and
get_iohc_fabric_id in the SoC code, move those functions to the common
AMD code, and implement get_iohc_info in the SoC code that returns a
pointer to and the size of a SoC-specific array of domain_iohc_info
structs that contains the info needed by the common code instead. This
allows to iterate over the domain_iohc_info structs which will be used
in a later patch to find the PSP MMIO base address in both ramstage and
smm.
TEST=Mandolin still boots and all non-PCI MIO resources are still
reported to the resource allocator
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifce3d2b540d14ba3cba36f7cbf248fb7c63483fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83443
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
No need to open-code this when we have a function for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iae570ba750cb29456436349b4263808e2e410e2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83643
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Move is_domain0 and is_dev_on_domain0 from the Intel Xeon SP code to the
common coreboot code so that it can be used elsewhere in coreboot too,
and while moving also implement it as functions instead of macros which
is more in line with the rest of helper functions in that new file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I954251ebc82802c77bf897dfa2db54aa10bc5ac4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83642
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MAINBOARD_VENDOR is already provided by the Kconfig file on the vendor
level, so there's no need to redefine it to the same value at the
mainboard level.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icfcbcec005fadb8eaf1b8f90e1d71b3c6ee32088
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83640
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In AMD platforms, the bit 4 of CMOS's Register A (0x0a) is DV0 bank
selection (0 for Bank 0; 1 for Bank 1) [1]. Since the MC146818 driver
accesses VBNV via Bank 0, the bit must be cleared before we can save
VBNV to CMOS in verstage.
Usually there's no problem with that, because the Register A is
configured in cmos_init() in ramstage. However, if CMOS has lost power,
then in the first boot after that, the bit may contain arbitrary data in
verstage. If that bit happens to be 1, then CMOS writes in verstage will
fail.
To fix the problem, define vbnv_platform_init_cmos() to call
cmos_init(0), which will configure the Register A and therefore allow
saving VBNV to CMOS in verstage.
[1] 48751_16h_bkdg.pdf
BUG=b:346716300
TEST=CMOS writes succeeded in verstage after battery cutoff
BRANCH=skyrim
Change-Id: Idf167387b403be1977ebc08daa1f40646dd8c83f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83495
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Fn key on riven emits a scancode of 94 (0x5e).
BUG=b:345231373
TEST=Flash riven, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: Iddedd08fc50e8e8e369ce3d73edf0f3077867e87
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83614
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Multiply before dividing to improve accuracy of the result.
Change-Id: I974cad3af4e1f86ae58e90c68db463fc436223af
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83619
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures GPIO pins as required for booting the Trulo
device from ramstage.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I7b540416083a923ba4d2e52aa8edafb4bfb9ac0e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
When we tried to add CMOS support to PSP verstage (CB:83495), the clang
builds failed on boards with cezanne SoC (such as Guybrush), due to
over-sized verstage. On the other hand, there is no such problem for gcc
builds on the same boards.
Building PSP verstage by clang generates much larger verstage size (81K)
compared with using gcc (67K). To unblock adding features to verstage,
temporarily enable -Oz for clang builds.
Change-Id: I033458556986ade88fb8e68499b632deae4dd419
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
