summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-20mb/google/brya/var/*: Add disable_gpio_export_in_crs to all devicetreesTim Wawrzynczak
None of the touchscreens used in the brya program (any brya board) should require exporting of GPIOs in the ACPI _CRS method for any i2c device. This can cause i2c devices to malfunction or cause timing sequence violations if: 1) ACPI exports a PowerResource for the device that uses GPIOs that are also exported in _CRS 2) The kernel driver for the device uses the GPIOs exported in _CRS for its own purposes. This means the state of the pin is out of sync between platform firmware and the kernel. The Linux ELAN I2C touchcsreen driver (https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/upstream/drivers/input/touchscreen/elants_i2c.c;l=1429) is one example of this. Therefore, add disable_gpio_export_in_crs to all brya variants that use the drivers/i2c/generic or drivers/i2c/hid chip drivers. Change-Id: Ib4475bd0dc885e230911de6298fd95baa868ef29 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-20mb/google/brya/var/primus: Update thermal table for primusAriel_Fang
- Because primus have five sensors,we need to define 5 sensors. BUG=b:200836803 TEST=USE="project_primus emerge-brya coreboot" and verify it builds without error. Signed-off-by: Ariel_Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: I02fb8eee644f9999d9c5d48e3a056499d968f85d Reviewed-on: https://review.coreboot.org/c/coreboot/+/60101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-20mb/google/brya/variants/brask: Disable autonomous GPIO power managementZhuohao Lee
We experienced the `Cr50 i2c TPM IRQ timeout!` error when the device executed the reboot test even though we have updated the Cr50 firmware to the latest version 0.6.70. Besides, we also experienced the device failed with the IRQ timeout when using the 0.3.22 Cr50 firmware in the factory. In order to fix these issues, we disable the gpio power management from the devicetree. BUG=b:210540890 TEST=reboot 100 cycles without the error message. Change-Id: I5f18fea5bc28493107c6d4951805de640a0b8ae5 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-20soc/amd/common/lpc/espi_util: use enum cb_err type for return valuesFelix Held
Use enum cb_err as return type of all remaining functions that only return success or failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6cff8480d99641fdfb613bb3e4edc4055ad5efc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/common/lpc/espi_util: use enum cb_err type for return valuesFelix Held
Use enum cb_err as return type of all functions that aren't exposed outside of this compilation unit. The checks if a function has returned a failure are replaced with checks if the return value isn't CB_SUCCESS which is equivalent if only those two values are used, but also detects a failure if any unexpected value would be returned. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If8c703f62babac31948d0878e91bd31b31bebc01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/common/lpc/espi_util: simplify espi_configure_decodesFelix Held
The intermediate ret variable isn't needed. espi_open_generic_io_window only returns 0 or -1, so if ret is != 0, it has to be -1. This is a preparation to use the enum cb_err type for the return values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6c7f4cedf8c2defadcf4c4da1697a97c7b401f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/common/lpc/espi_util: simplify espi_get_general_configurationFelix Held
The intermediate ret variable isn't needed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e6747cf468c5ba8da6c1a3b20022851e32ad951 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/cezanne/fch: disable 48MHz output in S0i3Felix Held
S0i3 is a low power state which reduces the power consumption to about the level of the S3 suspend state where the DRAM is kept in a self- refresh state and most of the rest of the system is powered down. So everything that can be switched off in the S0i3 state should be switched off in order to maximize the standby time. BUG=b:210722314 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If445f5825dc7b795c95d73c061156cc485421ada Reviewed-on: https://review.coreboot.org/c/coreboot/+/60125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-20soc/amd/stoneyridge/fch: add GNVS-related TODOsFelix Held
The AOAC device states shouldn't be stored in GNVS, but be read from the AOAC registers during runtime. Same for the EHCI controller's BAR0. The location and size of the XHCI firmware can either be statically determined at build-time or have coreboot generate ACPI objects that contain the needed addresses. Since I can't easily test changes that require booting to a desktop on Stoneyridge at the moment, only add TODOs for now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: I3691b05606b9430cb60923780a6131993a9887d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/stoneyridge: split southbridge codeFelix Held
Split the southbridge code into a bootblock and a ramstage part to align it more with Picasso and Cezanne. Also move the implementation of fch_clk_output_48Mhz to the end of early_fch.c since it's not really related to the functions that were previously around it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib660fbef8dc25ba0fab803ccd82b3408878d1588 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/stoneyridge: factor out AGESA-wrapper related FCH functionsFelix Held
Split the code that gets called from the AGESA wrapper from the rest of the FCH/southbridge code that directly interacts with the hardware. Since the remaining parts of southbridge.c aren't used in romstage, drop it from the list of build targets for romstage. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6197add0e1396a82545735653110e1e17bf9c303 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/stoneyridge: factor out early AOAC initializationFelix Held
Factor out enable_aoac_devices out of southbridge.c to aoac.c to align Stoneyridge more with Picasso and Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ied4d821138507639cad1794f6c5017b5873b761f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20mb/starlabs/labtop: Add enum for `power_profile`Angel Pons
Introduce and use an enum for the `power_profile` CMOS option. Add a helper function that converts CMOS values into enum values. Using an enum allows GCC to warn about switch statements using enum types for their control expressions not handling all possible enum values, and also improves readability. Change-Id: I47a453ea12d164d26908a9944a89a481757e753c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <admin@starlabs.systems> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-20mb/starlabs/labtop: Rename some filesAngel Pons
Rename `mainboard.c` to `smbios.c` as it only contains SMBIOS functions. Rename `ramstage.c` to `mainboard.c` as it contains the mainboard chip operations struct. Change-Id: I9548ca72a7583de98f5b154e3381825bba00d5cf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <admin@starlabs.systems> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-20soc/amd: remove root of SoC directory from include pathFelix Held
We shouldn't be providing -I include paths to the root of the soc specific directory. It allows for lazy includes that can collide, but there's no way of knowing the winning path since the winning path is determined by Makefile.inc parsing order. This is taken from CB:41355 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I45ed219e4e0cccf3d4f04cc70dc1ef77c518afff Reviewed-on: https://review.coreboot.org/c/coreboot/+/60201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-20mb/google/zork: use full path of SoC's chip.hFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I50d8c45e711dc62afe6f80e0f66422bcc9924dfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/60202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-20mb/amd/bilby,mandolin: use full path of SoC's chip.hFelix Held
This is taken from CB:41355 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iba1948ae2332788b7e0ec9b4e3cea35c6608b152 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-20soc/amd/stoneyridge/include/southbridge: remove unneeded chip.h includeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9b37efc89e505c2de99536b59e7d7e2bb1d54bff Reviewed-on: https://review.coreboot.org/c/coreboot/+/60199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-20mb/amd/gardenia,padmelon;mb/google/kahlee: use full path of SoC's chip.hFelix Held
This is taken from CB:41355 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I10a18efb92ac0c3cad31044156e32aa6afe1d4d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-20mb/amd/gardenia,padmelon;mb/google/kahlee: add missing soc/gpio includesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie716633bd7602d5e4a7e186aa9e444b7f70dab56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-19mainboard: Fix comment about early GPIOsAngel Pons
These boards program the early GPIO table in bootblock, not romstage. Change-Id: Iae9353d106483f30cefa2d035d96e63e4c127261 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Sean Rhodes <admin@starlabs.systems> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-18mb/siemens/chili: Reuse options from Kconfig.nameFelix Singer
Reuse the options from Kconfig.name for variant-specific selects. Change-Id: I35f51756180882d019a3ea8c555ccd18cd588f44 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-18mb/kontron/bsl6: Reuse options from Kconfig.nameFelix Singer
Reuse the options from Kconfig.name for variant-specific selects. Change-Id: I29ce7ef6f5137c1cf43726faed6081a04c83dea6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-18sb/intel/lynxpoint: Update `intel_me_status()` signatureAngel Pons
Update the parameter types of `intel_me_status()` to not be pointers. Change-Id: I0fd577c49bec7a581c340fc2fcadcadd50b1a638 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18sb/intel/lynxpoint/me.c: Refactor MEI CSR functionsAngel Pons
Change the signature of MEI CSR functions to reduce pointer usage. Change-Id: I1e4885daf8b3e11056421e663e67c8f360699a98 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18sb/intel/lynxpoint: Use unions for MEI registersAngel Pons
Wrap bitfield structs in unions to reduce pointer usage. This adds more uses of the `mei_dump()` function, only used for debugging. Refactoring the MEI CSR functions to not use pointers is done in a follow-up. Change-Id: I4defbb8c0e7812bf95c672ce529959f67c34537a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18sb/intel/lynxpoint: Use unions for ME PCI registersAngel Pons
Wrap bitfield structs in unions to reduce pointer usage. Change-Id: I8ac901211beb0ef24dff926b1a06004a99e68bda Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18sb/intel/lynxpoint: Drop typedefs of enum typeAngel Pons
There's no need to use typedefs for enum types. Get rid of it. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I830d95018b33fe6ab7e2c37ebf15bb1df6ceec38 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18sb/intel/lynxpoint: Drop typedefs of struct typesAngel Pons
There's no need to use typedefs for struct types. Get rid of them. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I109bd690500a9f03b9da0fd72044be79abf660d3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18soc/amd/cezanne/acpi: Add support for RTC workaroundRaul E Rangel
The RTC on Cezanne is an unstable wake source when the system is in S0i3. We instead need to use an internal timer that triggers a GPIO that acts as a wake source. This change provides the ACPI necessary to allow the OS to manage the wake source. BUG=b:209705576 TEST=Boot guybrush with this patch and several OS patches. Verified the OS sets the correct wake bit, the system correctly suspends and resumes, and the wake source is correctly accounted for. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f14d14df5d30d48d244416f2ec8c10ac5c8040e Reviewed-on: https://review.coreboot.org/c/coreboot/+/60172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18mb/google/guybrush: Disable GPIO export for Goodix TouchscreenRaul E Rangel
We want ACPI to own the GPIOs. This will stop the GPIOs from being exposed to the OS driver. BUG=b:209705576, b:210694108 TEST=Dump ACPI table and verify GPIO are no longer in _CRS. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8d2af41e1d04b98f0e3e19a95d7b91d08ecdf17b Reviewed-on: https://review.coreboot.org/c/coreboot/+/60173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-18soc/amd/common/block/acpimmio/print_reset_status: add missing status bitFelix Held
Both the Picasso PPR #55570 Rev 3.18 and the Cezanne PPR #56569 Rev 3.03 define bit 9 of the PM_RST_STATUS register as internal Thermal Trip reset status bit. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ida8b13fe62b16c18fc9924520b83220e73eca624 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-17soc/intel/denverton_ns: Use `popcnt()` helperAngel Pons
Use the `popcnt()` helper instead of manually counting the number of set bits in the first `CONFIG_MAX_CPUS` bits with a loop. Also, use unsigned types to store the number of active/total cores. Change-Id: Iae6b16991fcf07c9ad67d2b737e490212b8deedd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-17mb/google/guybrush/var/nipperkin: config eSPI as dedicated alertKevin Chiu
Setup eSPI to dedicated alert per the latest schematic changes. DUT won't hang up at power on boot due to eSPI alert is triggerred unexpectedly. BUG=b:199458949,b:203446084 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage test power on/reboot on DUT (6 units) each 10 loops->pass Change-Id: I55cda7a1af22e555a4f55285cb7e337a69e6c234 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-17google/trogdor: Enable Parade ps8640 edp bridge for pazquelYunlong Jia
BRANCH=none BUG=b:201478528 TEST=build and boot Change-Id: I6130ee00a0e6f469142f5416627e38c7b5076071 Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-12-16MAINTAINERS: Add libpayload unit-tests to TESTS sectionJakub Czapiga
Change-Id: I09aca01d9bb2624983e0d62628aef617c10eba9c Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-12-16mb/google/brya/var/felwinter: Add stylus probe for garageEric Lai
Felwinter has non-stylus sku. Add a FW_CONFIG field to indicate stylus presence and add a probe statement to the devicetree for the corresponding device. BUG=b:208937710 TEST=non-stylus doesn't register garage driver. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I06a2c125f2b5a73f9f7c27bf1b20ff8712664809 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-16Revert "security/vboot: Add NVRAM counter for TPM 2.0"Tim Wawrzynczak
This reverts commit 7dce19080889955576f8fd197658077aced96a96. Reason for revert: Unable to boot in factory mode Change-Id: I1b51010080164c6e28d77a932f77c10006fd4153 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-16amdfwtool: Upgrade "relative address" to four address modesZheng Bao
Address Mode 0: Physical Address, bit 63~56: 0x00 Address Mode 1: Relative Address to entire BIOS image, bit 63~56: 0x40 Address Mode 2: Relative Address to PSP/BIOS directory, bit 63~56: 0x80 Address Mode 3: Relative Address to slot N, bit 63~56: 0xC0 It is the expanding mode for simple relative address mode, for which address_mode equals 1. Only mode 2 is added. We need to record current table base address and calculate the offset. The ctx.current_table is zero outside the table. When it goes into the function to integrate the table, it should backup the old value and get current table base. Before it goes out the function, it should restore the value. If the table address mode is 2, the address in each entry should be also add address mode information. If not, the address mode in entry is meanless. The old mode 0,1 should be back compatible. Change-Id: I29a03f4381cd0507e2b2e3b359111e3375a73de1 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-16mb/google/guybrush/var/dewatt: Add audio codecKenneth Chan
Add ALC5682I-VD and ALC1019 for dewatt. BUG=b:208172493 TEST=emerge-guybrush coreboot chromeos-bootimage; Tested with proto build. Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ie4d21a11377c73b913a8f79a92d5869ea70f4394 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-16mb/google/brya/var/vell: update overridetreeKevin Chiu
Init basic override devicetree based on initial schematics BUG=b:205908918 TEST=emerge-brya coreboot Change-Id: Ibaa910eb1c5584197907963781258035c668298e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-16Documentation/releases: Improve CSME sectionPaul Menzel
1. Fix typo in *based* 2. Use official spelling for Alder Lake 3. Mention *Converged Security* 4. Capitalize CMOS Change-Id: I36eac6f017229a3e9261e0eb84371421927e1cae Fixes: 941239d54d (Documentation/releases: Update 4.16 release notes) Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-16Spell *Boot Guard* with a space for official spellingPaul Menzel
See for example Intel document *Secure the Network Infrastructure – Secure Boot Methodologies* [1]. Change all occurrences with the command below: $ git grep -l BootGuard | xargs sed -i 's/BootGuard/Boot Guard/g' [1]: https://builders.intel.com/docs/networkbuilders/secure-the-network-infrastructure-secure-boot-methodologies.pdf Change-Id: I69fb64b525fb4799bcb9d75624003c0d59b885b5 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15lib/cbfs: Disable cbfs_preload in romstage when VBOOT_STARTS_IN_ROMSTAGERaul E Rangel
Preloading files before vboot runs and using them after vboot has finished will result in the wrong files getting used. Disable cbfs_preload to avoid this behavior. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7698b481a73fb24eecf4c810ff8be8b6826528ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/59876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-12-15rules.h, thread.h, lib/cbfs: Add ENV_STAGE_SUPPORTS_COOPRaul E Rangel
This change consolidates the COOP rules. Co-op in theory works in all x86 stages now, but it hasn't been enabled yet. BUG=b:179699789 TEST=Boot guybrush to OS and verify preloads still work Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1197406d1d36391998b08e3076146bb2fff59d00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-12-15mb/google/fizz/Kconfig: Select board-specific options per boardFelix Singer
Move board-specific selects out of common configuration and add them to each board where necessary. Change-Id: I2b8a9906671b327bec249f3d16cba3ba80a95669 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mb/google/fizz: Move selects from Kconfig.name to KconfigFelix Singer
Move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Change-Id: I9201b5bcbf53422cefc6027a0d67fcf2201b14a4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mb/google/fizz: Restore alphabetical order on Kconfig selectsFelix Singer
Change-Id: Iaaca82aad3c687939291c051f203b58a9c8cdb70 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mb/google/glados/Kconfig: Select board-specific options per boardFelix Singer
Move board-specific selects out of common configuration and add them to each board where necessary. Change-Id: I70ab37588a6b08a0cc194469fd2642b3cfefe301 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mb/google/glados: Move selects from Kconfig.name to KconfigFelix Singer
Move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Change-Id: Ifccf2b3521d84f6a678872bbccf9bf390c25ce37 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15mb/intel/adlrvp_n: Add initial code for adl-n variant boardKrishna Prasad Bhat
This patch adds the following list of changes: 1. Create a new devicetree for adlrvp-n and copy contents of adlrvp-p devictree. 2. Add support for 2 mainboards as ADL-N board with default EC (Windows SKU) and Chrome EC (Chrome SKU) and copy overridetree contents from adlrvp-p. 3. Add mainboard Kconfig to Kconfig.name file 4. Handle mainboard names in Kconfig file for ADLRVP N 5. Add config options to pick the adlrvp_n devicetree Change-Id: I4abf3bf62ec0398ae75e21575a2fab0d44b5c7ad Signed-off-by: Usha P <usha.p@intel.com> Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15soc/amd/common/block/psp: move psp_notify_dram to psp_gen1.cFelix Held
The MBOX_BIOS_CMD_DRAM_INFO PSP mailbox command is only available on the first generation of PSP mailbox interface and not on the second generation. The second generation of the PSP mailbox interface was introduced with the AMD family 17h SoCs on which the DRAM is already initialized before the x86 cores are released from reset. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I97b29fdc4a71d6493ec63fa60f580778f026ec0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/60124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-15drivers/spi/spi-generic: document SPI_CNTRLR_DEDUCT_CMD_LEN betterFelix Held
This should make it a bit clearer what the differences between SPI_CNTRLR_DEDUCT_OPCODE_LEN and SPI_CNTRLR_DEDUCT_CMD_LEN and the corresponding functionality in spi_crop_chunk are. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I809adebb182fc0866b93372b5b486117176da388 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15drivers/spi/spi-generic: fix edge case in spi_crop_chunkFelix Held
In the case of deduct_cmd_len being set and the adjusted cmd_len >= ctrlr_max, ctrlr_max wasn't being adjusted and still had the value of ctrlr->max_xfer_size. Handle this edge case (which we should never run into) by setting ctrlr_max to 0 and printing a warning to the console. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9941b2947bb0a44dfae8ee69f509795dfb0cb241 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/block/spi/fch_spi_ctrl: improve printk messagesFelix Held
Replace FCH_SC with FCH SPI in the printk messages to make those a bit clearer and also remove an unneeded line break in another printk call. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6ff02163e6a48a2cc8b7fe89b15826e154715d29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/block/spi/fch_spi_ctrl: handle failure in execute_commandFelix Held
When wait_for_ready returned a timeout, execute_command still ended up returning success. Fix this be returning a failure in this case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id012e74e26065c12d003793322dcdd448df758b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/block/spi/fch_spi_ctrl: rework dump_stateFelix Held
Introduce and use enum spi_dump_state_phase to indicate from which phase of the SPI transfer dump_state gets called to print the relevant debug information for that phase. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2f54d4a7eb2f3b9756b77a01533f7c99e8597bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/60118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/include/spi: add Cezanne-specific commentFelix Held
The Cezanne PPR #56569 Rev 3.03 has one more SPI FIFO bytes defined compared to the previous generations. It is unclear if adding some special handling for Cezanne would be worth the effort, since the current code just doesn't use the last byte which should be safe to do, since this only affects the maximum number of bytes that can be used for one SPI transaction. Having another byte to use on Cezanne wouldn't reduce the number of SPI transactions to write a 256 byte data block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic730f4fe838f59066120c811833995c132c84c1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/60117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/include/spi: fix SPI_FIFO_LAST_BYTE defineFelix Held
The last byte of the SPI FIFO SPI_FIFO_LAST_BYTE is at offset 0xc6 of the SPI controller's MMIO region for Stoneyridge and Picasso. Both SPI_FIFO_LAST_BYTE and SPI_FIFO_DEPTH had an off-by-one error that ended up cancelling out each other, so the resulting value for SPI_FIFO_DEPTH isn't changed. TEST=Timeless build results in identical image for Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1676be902ccf57e2e9f69d81251b4315866a0628 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15tests/lib/lzma-test: Fix uninitialized array errorJakub Czapiga
Change-Id: I5b10eef3dd82068f97d4d875f3da813a5aca07a7 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reported-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60112 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-15mb/google/guybrush: Set TPM to to be kernel power managed.Rob Barnes
Set TPM power_managed_mode to TPM_KERNEL_POWER_MANAGED. This will cause the TPM kernel driver to send a shutdown command before s0i3 entry. This change depends on S0i3 verstage running and reinitializing the TPM. BUG=b:200578885 BRANCH=None TEST=TPM shutdown sent during s0i3 entry on guybrush Change-Id: I206022cc2a29690186206966c5d45bd55c303248 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-15mb/google/dedede/var/madoo: Generate new SPD ID for new memory partsDtrain Hsu
Add new memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: 1. Micron MT53E512M32D1NP-046 WT:B 2. Samsung K4U6E3S4AB-MGCL 3. Hynix H54G46CYRBX267 BUG=b:209889645 BRANCH=dedede TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I0b2f447a610a0a857e819ede257ac89cfd817018 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59991 Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-15Denverton-NS boards: Drop useless `thermal.asl`Angel Pons
The code in these files is meaningless, and can be dropped. Change-Id: I11571885059e8d5f930f741172c74b25faa09a15 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-12-15mb/google/brya/var/primus{4es}: Configure Acoustic noise mitigationCasper Chang
- Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to 8 BUG=b:204844399 TEST=USE="project_primus emerge-brya coreboot" and verified the setting meets the audible noise specification Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I0e0baf78a841278efda912cc5e4e9970329aacf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mainboard/starlabs/labtop: Hook up Thunderbolt to CMOSSean Rhodes
Hook up Thunderbolt and related settings to CMOS value of `thunderbolt`. Changes TcssXhciEn, UsbTcPortEn and the relevant PCI devices. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ibadc7464831242ae51982610b410ccf0a6811edd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
2021-12-15mb/google/guybrush/var/nipperkin: update LPDDR4X DRAM tableKevin Chiu
add Hynix H54G56CYRBX247 support BUG=b:210365851 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage power on successfully Change-Id: I99bed32025d10f62e63ace8f7f23e7cc3a740e93 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60075 Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-15mb/google/brya/var/taniks: Configure DRIVER_TPM_I2C_BUSJoey Peng
Add I2C bus for taniks in Kconfig BUG=b:210390520 TEST=emerge-brya coreboot and can boot to OS. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I9b1719c3140c13f67e7cb0e6a69257774884bd4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/60077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mb/google/brya/variant/taniks: Add memory settingsJoey Peng
Based on the Taniks's schematic, generate memory settings. Schematic version is G570_MB_CHROME_1207_1630_ADC. BUG=b:209531192,b:209553289 TEST=FW_NAME=taniks emerge-brya coreboot chromeos-bootimage Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I0c0794fb94d1f6271de604835ae1d2b20696ee70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-15mb/google/brya/variants/taniks: Configure GPIOs according to schematicsJoey Peng
Add initial gpio configuration for taniks according to schematics G570_MB_CHROME_1207_1630_ADC. The schematics reserved HPS and FP but taniks doesn't use them, so set FP and HPS related pins to NC. BUG=b:209492408, b:209553289 TEST=FW_NAME=taniks emerge-brya coreboot Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ic5c4ead4ad59137e1764e1226415ab6041c68aab Reviewed-on: https://review.coreboot.org/c/coreboot/+/59938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15soc/intel/denverton_ns: Fix MRC_RW_CACHEKyösti Mälkki
It is required to set WPD (Write Protect Disable) bit to make it possible to use MRC_RW_CACHE region with CACHE_MRC_SETTINGS=y. Change-Id: Iacab44b00d08c9bdc18bc3bdcb88833634c0b02e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15soc/intel/denverton_ns: Use common SMBus support codeKyösti Mälkki
Change-Id: I233d198b894f10fbf0042a5023ae8a9c14136513 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15soc/intel/baytrail,denverton_ns: Call setup_lapic()Dmitry Ponamorev
A custom board with soc/intel/denverton_ns does not respond to the keyboard and does not boot from the sata/USB disks. Last post code 0x7b and the last line that is displayed at log from SeaBIOS is: All threads complete. The issue is gone when adding setup_lapic() call to configure EXTINT delivery of i8259 originated interrupts for the LAPIC. Replicate call from other soc/ and make the call for both BSP and AP CPUs. Similar change was done for soc/intel/braswell in commit b4f57bb3cac3ab29b9fa9c526ad4358faffb77a1. Signed-off-by: Dmitry Ponamorev <dponamorev@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: Iafbfb733d0be546e0e2fba937fd1d262785aa54d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15mb/google/corsola: move USB3 HUB reset funtion to bootblockRex-BC Chen
To save the S3 power, USB3_HUB_RST_L is externally pulled up to a weak resistor, so we have to reset the hub as early as possible. Otherwise the USB3 hub may be not usable. Therefore, move USB3 HUB reset function to bootblock. BUG=b:210065282 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I92feb2316302fda32478b24c014bcd380d0ac55d Reviewed-on: https://review.coreboot.org/c/coreboot/+/60088 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-14cbfstool: Clean up remnants of locate actionJulius Werner
`cbfstool locate` and the associated -T switch were removed a looong time ago (2015 in CB:11671). However, getopt and the help text weren't cleaned up correctly. Fix that. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib098278d68df65d348528fbfd2496b5737ca6246 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-14cbfstool: Use converted buffer size for do_cbfs_locate()Julius Werner
The whole point of moving do_cbfs_locate() later (CB:59877) was that it could use the file size that is actually going to be inserted into CBFS, rather than the on-disk file size. Unfortunately, after all that work I forgot to actually make it do that. This patch fixes that. Since there is no more use case for do_cbfs_locate() having to figure out the file size on its own, and that generally seems to be a bad idea (as the original issue shows), also remove that part of it completely and make the data_size parameter mandatory. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1af35e8e388f78aae3593c029afcfb4e510d2b8f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-14mb/google/glados: Restore alphabetical order on Kconfig selectsFelix Singer
Change-Id: I736234b9a960c58193fcf7bc9184c9581c6c953b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-14mb/google/corsola: set up open-drain ChromeOS pinsRex-BC Chen
Set open-drain GPIOs for ChromeOS as input and high-z mode. After applying this patch, we can measure these pins from 1.0V to correct voltage (1.8V) to prevent wrong judgement of low/high. Reference document: MT8186_SoC_Pinmux_V1_1 BUG=b:209342636 TEST=measure pins voltage 1.8V on kingler board Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ib55a773bb63404a1b952f7e7645eb7aba6638b00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-14soc/mediatek/mt8186: add tracker dumpRex-BC Chen
Tracker is a debugging tool, and MT8186 only supports AP tracker. When bus timeout occurs, the system reboots and latches some values which could be used for debugging. This function will be triggered only when it encounters the bug hanging issue. BUG=b:202871018 TEST=range of registers are dumped as expected. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie023de2a6f7421a16b2516baa0bf0bf6fff589e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-14amdfwtool: Use relative address for EFS gen2Zheng Bao
The second generation EFS (offset 0x24[0]=0) uses "binary relative" offsets and not "x86 physical MMIO address" like gen1. The field additional_info in table header can tell if the absolute or relative address is used. Chips like Cezanne can run in both cases, so no problem comes up so far. The related change in psp_verstage has been uploaded. https://review.coreboot.org/c/coreboot/+/58316 The relative mode is the mode 1 of four address modes. The absolute mode is the mode 0. Later we will implement mode 2. Not sure if mode 3 is needed. It needs to be simple to work with psp_verstage change to make SOC Cezanne work quickly. This patch is defacto a subset of https://review.coreboot.org/c/coreboot/+/59308 which implements the framework of address mode and covers mode 0,1,2. Some hardcode value like 29 can be removed in 59308. BUG=b:188754219 Test=Majolica (Cezanne) Change-Id: I7701c7819f03586d4ecab3d744056c8c902b630f Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-14payloads/U-Boot: Fix various build errorsBill XIE
1. Fix the inconsistence of the target path of U-Boot payload between Kconfig and Makefile.inc. 2. Perform full clone (to the destined commit) in order to get tags. 3. Move stable commit id of U-Boot payload from Makefile to Kconfig, and make prompt consistent with it. Change-Id: Ic0f11c16274456a452a0422e19fab0c61d8b5d5b Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-14soc/mediatek: add support for tracker version oneRex-BC Chen
There are two versions for tracker system: Version 1 for MT8186, and version 2 for MT8192 and MT8195. Reference document: MT8169_bus_dbg_tracker_cfg_reg.xls from MediaTek internal. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idb146974da118b1cf5a349370bf7b2fa13f1aba8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59989 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-14soc/amd/{cezanne,common}: Add PSP_S0I3_RESUME_VERSTAGE Kconfig optionRob Barnes
Add PSP_S0I3_RESUME_VERSTAGE Kconfig option. When enabled, verstage will be run in PSP during S0i3 resume. Setting softfuse bit 40 enables this in PSP. BUG=b:200578885, b:202397678 BRANCH=None TEST=Verstage runs during s0i3 resume on Nipperkin Change-Id: I2c185f787c1e77bd09f6cbbb1f47deb665ed0c79 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-13Documentation/releases: Update 4.16 release notesSean Rhodes
* Add StarBook Mk V as new mainboard * Add option to disable Intel Management Engine via HECI Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I9675a6a8960d93ae6de285d8b25ffc48a763483e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-13arch/x86/c_start.S: Remove duplicated "the" in commentsElyes HAOUAS
Change-Id: Ib1be1db6f475ad0e1f34703bfe1257d02b86742c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-13soc/intel/common/cse: Update help text for CSE_OEMP_FILEravindr1
The OEM may create and sign an Audio component to extend the Audio capability provided by Intel. The manifest is then signed, and the signature and public key are entered into the header of the manifest to create the final signed component binary. This creates a secure verification mechanism where firmware verifies that the OEM Key Manifest was signed with a key owned by a trusted owner. Once OEM KM is authenticated, each public key hash stored within the OEM KM is able to authenticate the corresponding FW binary. Link to the Document: https://www.intel.com/content/www/us/en/secure/design/confidential/software-kits/kit-details.html?kitId=689893 ADL_Signing_and_Manifesting_User_Guide.pdf BUG=b:207820413 TEST:none Signed-off-by: ravindr1 <ravindra@intel.com> Change-Id: Id52b51ab1c910d70b7897eb31add8287b5b0166f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-13soc/intel/common/block/cpu/car/exit_car_fsp.S: Align stackArthur Heymans
Change-Id: I6b5864cfb9b013559cd318bc01733ba4d3792e65 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-13cbfs: Enable CBFS verification KconfigsJulius Werner
With the elimination of remaining non-verifying CBFS APIs in CB:59682, CBFS verification is now ready to be used in its simplest form, so enable the respective Kconfig options in menuconfig. Add a few more restrictions to the TOCTOU_SAFETY option for problems that haven't been solved yet, and transform a comment in cbfs.c into a die() to make sure we don't accidentally forget implementing it once vboot integration gets added. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ifeba5c962c943856ab79bc6c4cb90a60c1de4a60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-12-13cbfstool: Do host space address conversion earlier when adding filesJulius Werner
In cbfs_add_component(), the |offset| variable confusingly jumps back and forth between host address space and flash address space in some cases. This patch tries to clean that logic up a bit by converting it to flash address space very early in the function, and then keeping it that way afterwards. convert() implementations that need the host address space value should store it in a different variable to reduce the risk of confusion. This should also fix a tiny issue where --gen-attribute might have previously encoded the base address as given in CBFS -- it probably makes more sense to always have it store a consistent format (i.e. always flash address). Also revert the unnecessary check for --base-address in add_topswap_bootblock() that was added in CB:59877. On closer inspection, the function actually doesn't use the passed in *offset at all and uses it purely as an out-parameter. So while our current Makefile does pass --base-address when adding the bootblock, it actually has no effect and is redundant for the topswap case. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Idf4721c5b0700789ddb81c1618d740b3e7f486cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/60018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-13mb/google/dedede/var/lantis: Add fw_config probe for ALC5682-VD/ALC5682-VSWisley Chen
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:206676530 TEST=build Change-Id: Ie73dc376078c0836edd980e09629399c5cc19594 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-13mb/google/guybrush/var/dewatt: Add Elan touchscreenKenneth Chan
Add Elan 6918 touchscreen for dewatt. (EKTH6918 Product Spec V0.5) BUG=b:208373433 TEST=emerge-guybrush coreboot chromeos-bootimage. Teseted with Elan 6918 touchscreen. Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I28a7f5891e09ffa393c93881be68641d955efdf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-13mb/google/guybrush/var/dewatt: Add Synaptics touchpadKenneth Chan
Add Synaptics S9831 touchpad for dewatt. BUG=b:208182457 TEST=emerge-guybrush coreboot chromeos-bootimage. Tested with Synaptics S9831 touchpad. Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Id3e0636dd0ce5b80c2044c1dfca20ca7eac87fc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-13MAINTAINERS: Replace maintainer for facebook, portwell and eltanFrans Hendriks
Change-Id: I3a6ecff4cf0c22e941261b77deefb272c1137a8e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-13mb/google/octopus: add ALC5682I-VS to be supported in the SSFCPaul Huang
Add ALC5682I-VS codec support. ALC5682I-VD/ALC5682I-VS load different hid name depending on SSFC. BUG=b:198722640 BRANCH=octopus TEST=Set CBI SSFC BIT9-11 to select codec, and test audio works Change-Id: I80be12d88e100ce8586371fc49b36447859e24f8 Signed-off-by: Paul Huang <paul2_huang@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-12-13mb/google/zork/var/shuboz: Add fw_config probe for ALC5682-VD & VSKane Chen
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:198689479 BRANCH=zork TEST=ALC5682-VD/ALC5682I-VS audio codec can work Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I0c78aa166010ffa4d0cacc8a11d418d5a6906749 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59558 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-13soc/amd/cezanne: Don't select CPU_INFO_V2 explicitlyNico Huber
It's already implied by PARALLEL_MP now. Change-Id: Ia76f1a925b2c0ebbba0bf20b094e716708d540c2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-13soc/intel/alderlake: Implement function to map physical port to EC portMAULIK V VAGHELA
Currently coreboot and EC had different logic to interpret TCSS port number which would break retimer update functionality since coreboot would pass wrong port information to EC. To correct this, coreboot has implemented function which converts coreboot physical port mapping to EC's abstract port mapping. Each SoC needs to implement this weak function since only SoC will have correct physical port mapping data. This function should resolve issue of port mismatch since coreboot will count only enabled ports and provide correct EC port number in return. BUG=b:207057940 BRANCH=None TEST=Check if retimer update works on Redrix and correct port information is passed to EC. Change-Id: I3735b7c7794b46123aba3beac8c0268ce72d658c Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-13drivers/intel/usb4/retimer: Add function to correct EC port mappingMAULIK V VAGHELA
Currently coreboot interprets TCSS port number as per physical port number while EC abstracts port number and provides indices as port number. For example, if TCSS port 1 and 3 are enabled on the board, coreboot will interpret port numbers as 0 and 2, but since only 2 ports are enabled in the system EC will assign port numbers as 0 and 1. This creates a port number mismatch while communicating between EC and coreboot. This patch addresses issue where SoC can implement function to map correct EC port as per port enabled in mainboard. BUG=b:207057940 BRANCH=None TEST=Check if code compiles successfully. Functionality will work once function is implemented in SoC code. Change-Id: Ia7a5e63838e6529196bd211516e4d665b084f79e Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-13soc/intel/common/block/pcie/rtd3: Add ModPHY power gate support for RTD3Tim Wawrzynczak
For additional power savings during RTD3, the PMC can power-gate the ModPHY lanes that are used by the PCH PCIe root ports. Therefore, using the previous PCIe RP-type detection functions, implement ModPHY PG support for the PCH PCIe RPs. This involves: 1) Adding a mutex so only one power resource accesses the PMC registers at a time 2) OperationRegions to access the PMC's PG registers 3) Adding ModPHY PG enable sequence to _OFF 4) Adding ModPHY PG disable sequence to _ON BUG=b:197983574 TEST=50 S0ix suspend/resume cycles on brya0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I19cb05a74acfa3ded7867b1cac32c161a83b4f7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59855 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Cliff Huang <cliff.huang@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-13soc/intel/alderlake: Define soc_get_pcie_rp_typeTim Wawrzynczak
In order to distinguish PCH from CPU PCIe RPs, define the soc_get_pcie_rp_type function for Alder Lake. While we're here, add PCIe RP group definitions for PCH-M chipsets. BUG=b:197983574 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7438513e10b7cea8dac678b97a901b710247c188 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-13soc/intel/tigerlake: Define soc_get_pcie_rp_typeTim Wawrzynczak
In order to distinguish PCH from CPU PCIe RPs, define the soc_get_pcie_rp_type function for Tiger Lake. BUG=b:197983574 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic3f7d3f2fc12ae2b53604cd8f8b694a7674c3620 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 11:17:08 +0000