summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-19mb/google/brask/variants/moli: update type-c setting in overridetreeRaihow Shi
Add conn1 for pch_espi and add type-c port2 for pmc_mux. BUG=b:220814038 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Idfd7b761496a110f34838abb0fd408b37d390ba2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-19mb/google/brask/variants/moli: add delay time to rtd3-coldRaihow Shi
This CL adds the delay time 50 ms and 20 ms into the RTD3 sequence, the reason is that the rise and fall times of each signal may differ by board, and so those board-specific delays must be taken into account when power sequencing. We checked power on sequence requires enable pin prior to reset pin, so added delay to meet the sequence. Based on BH799BB_Preliminary_DS_R079_20201124.pdf in chapter 7.2. BUG=b:228907551 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Idecb1c89655c9b8b720c3c65efc77e06e6a8b300 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-19mb/google/brask/variants/moli: remove i2c1 in overridetreeRaihow Shi
Remove i2c1 because brask devicetree is already has it. BUG=b:220814038 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Ic782e1c6434ac57bdf65b3d9f4219bdf32d25b9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-19mb/google/skyrim: Configure Pen Detect deviceIan Feng
Enable pen garage. Pen detect is active low. BUG=b:229168203 TEST:Build and boot to OS in skyrim. Evtest work as expected Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100 Input device name: "PRP0001:00" Supported events: Event type 0 (EV_SYN) Event type 5 (EV_SW) Event code 15 (SW_PEN_INSERTED) state 1 Properties: Testing ... (interrupt to exit) Event: time 1649922170.578779, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0 Event: time 1649922170.578779, -------------- SYN_REPORT ------------ Event: time 1649922172.070740, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I3bb07af6aebdc355a73148d8be79b1014147f61d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-04-19mb/google/skyrim: Add Goodix touchscreenIan Feng
Add Goodix touchscreen according to the Programming Guide Rev.0.7 BUG=b:228907558 TEST=local build and tested with Goodix touch screen Change-Id: I35dd3ca76e9e0f17508bef46c90b53b4be5d0033 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63573 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-19mb/google/brask: fix boot beepDtrain Hsu
Fix the issue that can't hear the boot beep at dev screen. GPP_B14 is used for PWM_PP3300_BUZZER and it should set to GPO. Modify GPP_B14 from PAD_CFG_NF_LOCK to PAD_CFG_GPO_LOCK. BUG=b:229345416 BRANCH=firmware-brya-14505.B TEST=emerge-brask coreboot and verify if the buzzer beeps. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I601735ab20974cd992ca5dd6dbaca1517a395aa2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63645 Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-19mb/google/brask/variants/moli: Pick VBT based on FW_CONFIGRaihow Shi
Pick specific VBTs for HDMI, DP, and ABSENT according to FW_CONFIG. BUG=b:220241277 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Icc8fbef1467605505459fce264697f670591c81e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63604 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-19mb/google/brya/var/anahera{4es}: select DRIVERS_GENESYSLOGIC_GL9750Wisley Chen
select DRIVERS_GENESYSLOGIC_GL9750 to disable ASPM L0s. BUG=b:229213455 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Ie89fa6c66974284063cd25ae8097db94a93326ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/63638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-19Kconfig: Make HAVE_EM100_SUPPORT invisibleArthur Heymans
This is a property of a platform and should not be exposed to the user. Change-Id: I34f9097d40b2bf732cecf30bf13ba5a413dd53a5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-04-19cpu/x86/Kconfig*: Guard with ARCH_X86Arthur Heymans
None of these options make sense on different ARCH. Change-Id: Ie90ad24ff9013e38c42f10285cc3b546a3cc0571 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63673 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-19payloads/depthcharge: enable LP_CHROMEOS in depthchargeSelma Bensaid
Fix standslone build failure after depthcharge patch https://crrev.com/c/3461454 merge. BUG=chrome-os-partner:226438207 TEST=Compiled brya and redrix in standalone mode. Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: Ib2bb2ce42a314e05ef22ea7b8abc067d6361d511 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-04-19soc/intel/alderlake: Enable Pre Reset CPU TelemetryBora Guvendik
Insert CSE timestamps to coreboot timestamp table. BUG=b:182575295 TEST=Boot to OS on Brya Redrix board. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ifbea7155a294e0039a5bd1d16588775e90a29ae3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-19mb/google/nissa: Add gpio lock pinsEric Lai
Followed the Brya series to lock the gpio pins in baseboard. Variant should honor locked gpios from baseboard, but not the last. Variant can add more gpios to lock if needed. BUG=b:216671701 TEST='emerge-nissa coreboot chromeos-bootimage', flash and verify that nivviks boots successfully to kernel. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ib34ca287596a6958407a944d0caf53f4bcc60d9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/63568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-19mb/google/brya: Add Kconfig for TPM I2C busRaihow Shi
Add TPM I2C for crota to avoid TPM I2C fail. BUG=b:229200525 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I8054e623fb0c3c549c3373982ce9d4fbd57e0fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-19mb/google/brya/var/crota: Kconfig: Select TPM I2C bus driverTerry Chen
Add TPM I2C for crota to avoid TPM I2C fail. BUG=b:226315394 TEST=USE="project_crota emerge-brya coreboot" and verify it builds without error. Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I7eb3ce6c2faf857c8f5d789af395e315caea4102 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-19tests: Split Makefile to allow for making host-side test toolsJakub Czapiga
This patch is based on similar changes [1] done in Depthcharge projects, which aimed to provide unified way to build host-side programs for testing internal code. New test tools might benefit from it by having same base code as unit-tests. [1] https://crrev.com/c/3412108 TEST=make unit-tests TEST=COV=1 make unit-tests coverage-report Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: Iac4517ab6146fa3f2d2b7a20df54601ab2d04c3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-04-19tests: update CMocka to stable-1.1Jakub Czapiga
CMocka stable-1.1 has some convenience bugfixes like vprint buffer increase or leftover values log fix (funtion names display correctly now. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I20ebd15324a21c17cccd2976ae9c3f86b040426d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-04-19mb/google/guybrush/var/dewatt: Update APU STT settingChris.Wang
update STT setting for dewatt. BUG=b:228040295 BRANCH=guybrush TEST=build, verify the parameter has been applied to the system by checking the AGT tool. Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Id319d42747dd0d5f6a9ca727635d85e6b9bd65af Reviewed-on: https://review.coreboot.org/c/coreboot/+/63699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-04-19soc/intel/cmn/fast_spi: Add API to set SPI controller VCLSubrata Banik
This patch creates a helper function to set SPI controller VCL bit as recommended by Intel Flash Security Specification. BUG=b:211954778 TEST=Able to build google/brya and verified that SPI flash controller MMIO register 0xC4 bit 30 is set. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie9a12db1bab81779fd8e7db90221d08da3c65011 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-04-19soc/intel/cmn/fast_spi: Add API to clear outstanding SPI statusSubrata Banik
This patch creates a helper function to clear HSFSTS_CTL (offset 0x04) register Bits 0 to 4. As per Intel PCH BIOS spec section 3.6 Flash Security Recommendation, it's important to clear all SPI outstanding status before setting SPI lock bits. BUG=b:211954778 TEST=Able to build google/brya with this patch and clear SPI controller HSFSTS_CTL register Bits 0 to 4. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I62adba0d0cef1d4c53b24800f90b4fe76a9d78b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-04-19soc/intel/cmn/fast_spi: Add API to check if SPI Cycle In ProgressSubrata Banik
This patch creates a helper function to check if any SPI transaction is pending. As per Intel PCH BIOS spec section 3.6 Flash Security Recommendation, it's important to ensure there is no pending SPI transaction before setting SPI lock bits. BUG=b:211954778 TEST=Able to build google/brya with this patch and no error msg seen due to `SPI transaction is pending`. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibd3f67ae60bfcb3610cd0950b057da97ff74b5b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-04-19soc/intel/cmn/lpc: Fix typo from FAST_SPIBAR to LPCSubrata Banik
BUG=b:211954778 TEST=None Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib8cc4b8d13b61e3935f2050d25ce0278162c91c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-19soc/intel/cmn/fast_spi: Use tab instead spaceSubrata Banik
This patch converts whitespace into tabs to maintain the uniformity across the fast_spi_def.h file. BUG=b:211954778 TEST=Able to build google/brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I56bcd263c6a5c0036e459926a25538e3448fbce6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-04-18mb/google/guybrush: Remove EC_ENABLE_LID_SWITCHRob Barnes
Remove EC_ENABLE_LID_SWITCH since this causes a duplicate SW_LID entries. The other SW_LID entry is generated by MKBP. BUG=b:228907256 BRANCH=guybrush TEST=Lid open close triggers events on Nipperkin Change-Id: I5c1cf7aeac8405bce7bfc77110eceaf3e5383fe7 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-04-18mb/google/guybrush/var/nipperkin: turn off WLAN ASPM L1ssKevin Chiu
BUG=b:227296841 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage pass PLT criteria: S0 > 600ms, s0i3 > 14 days Change-Id: I9c61e1d0f3db8b9885040255d6de266616768b68 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-04-18mb/hp/z220_series: Add Z220 CMT Workstation variantDamien Zammit
This is based on previous work done by a good friend of mine. The notable differences between this board and the SFF variant is that: - CMT has 4 more PCI/PCIe ports than SFF. - CMT has 2 more SATA ports than SFF. TESTED on Z220 CMT Workstation (boots to payload) Change-Id: I2b298921e6f509440ec7b049e086c0878f708bd3 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-16mb/lenovo/t440p/Kconfig: Reorder selects alphabeticallyFelix Singer
Built lenovo/t440p with BUILD_TIMELESS=1 and coreboot.rom remains the same. Change-Id: I7bac7ad5236346a3c2a8928ecdfadde6564ff232 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-16mb/lenovo/t440p/dsdt.asl: Remove redundant commentFelix Singer
Change-Id: Ie772701192a3589b51642df446f0b2527fb7d630 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-04-14mb/google/guybrush: Set BT USB to use GPIO for statusTim Van Patten
Set the BT USB device to use GPIO for the power status. This causes an ACPI `_STA()` function to be generated that returns the power status of the BT USB device, rather than always returning `0x1`. This `_STA()` function can be used during boot to skip enabling the device (and performing the associated sleep) if the device is already powered on. BRANCH=None BUG=b:225022810 TEST=Dump SSDT table for guybrush Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I72f6b28671efddfbef53f328d904a05f73f39efa Reviewed-on: https://review.coreboot.org/c/coreboot/+/63559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-14src/acpi/device: Early return in _ON if device already enabledTim Van Patten
If the device has enabled `use_gpio_for_status`, then call the `_STA` method in `_ON` to determine if the device is already enabled. If it is already enabled, return early to skip re-enabling the device and performing the associated sleep. This change is necessary since the Linux kernel does not call `_STA` before calling `_ON`. BRANCH=None BUG=b:225022810 TEST=Dump SSDT table for guybrush Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I13aa41766555953b86eded4c72e3b317fe6db5c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63613 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-14drivers/usb/acpi: acpi_power_res_params: Add use_gpio_for_statusTim Van Patten
Add the member `use_gpio_for_status` to the structure `drivers_usb_acpi_config`, so the `devicetree.cb` can specify it. This field is then used to initialize the corresponding field in the structure `acpi_power_res_params` in `usb_acpi_fill_ssdt_generator()`. The member `acpi_power_res_params::use_gpio_for_status()` is already being used by `acpi_device_add_power_res()` to determine which version of the `_STA()` method to output. BRANCH=None BUG=b:225022810 TEST=Dump SSDT table for guybrush Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I69eb5f1ad79f3b2980f43dcf4a36585fca198ec9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-14coreboot_tables: Replace 'struct lb_uint64' with lb_uint64_tJianjun Wang
Replace 'struct lb_uint64' with 'typedef __aligned(4) uint64_t lb_uint64_t', and remove unpack_lb64/pack_lb64 functions since it's no longer needed. Also replace 'struct cbuint64' with 'cb_uint64_t' and remove 'cb_unpack64' in libpayload for compatible with lb_uint64_t. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: If6b037e4403a8000625f4a5fb8d20311fe76200a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-14mb/google/skyrim: Inject SPDs into APCBKarthikeyan Ramasubramanian
Update the build scripts to inject variant specific SPDs into APCB. BUG=None TEST=Build and boot to OS in Skyrim boards with all the concerned memory parts. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3b3f6f248d54681c6f55c00660d1f2988ae906ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/63600 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-14mb/google/skyrim/var/skyrim: Add supported memory partsKarthikeyan Ramasubramanian
Add supported memory parts and generate the associated DRAM part ID. Also for MT62F2G32D8DR-031 WT:B memory part, add a custom SPD that configures the DRAM speed at 5500 MHz. Use this custom SPD until that part can operate at full speed (i.e. 6400 MHz). BUG=None TEST=Build Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Id87e79f5d6187d57d74487841c09aa309f1450b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-14util/apcb/apcb_v3_edit.py: Edit APCB based on different SPD magicKarthikeyan Ramasubramanian
APCB edit tool edits APCBs with LP4 specific SPDs. Introduce an option to support different SPD magic so that the tool can be used to edit APCBs with LP5 specific SPDs. BUG=None TEST=Build Skyrim board with LP5 specific SPDs. Build Guybrush board with LP4 specific SPDs. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8e96c89e4e5ce8e0567a17bf7685b69080fa1708 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63598 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-14util/spd_tools/part_id_gen: Support Sabrina SoCKarthikeyan Ramasubramanian
Add support to generate DRAM part ID for boards using Sabrina SoC. BUG=None TEST=Generate DRAM part ID for Skyrim mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ica57b12239019831f7bf93982be3c93b7f8b6986 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-14mb/google/brya/var/kano: Configure Acoustic noise mitigationDavid Wu
Setup the following acoustic noise mitigation features: 1) Slew rate for both IA and GT domains to 1/8 2) Disable Fast package C ramp BUG=b:229046516 TEST=build and verified by power team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ifb5700391e33818878994f205acae7ee3b1b96d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-14mb/prodrive/atlas: Update KconfigLean Sheng Tan
Update Kconfig per Atlas usages: 1. Set EC I/O mapped UART as default UART output 2. Add EC IFD region & ACPI support Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I970de724237bcb08899aed7a4b87a23c5cdb0b48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2022-04-14soc/amd/sabrina: Allow to specify custom SPL FileKarthikeyan Ramasubramanian
PSP needs SPL file to boot. Introduce the support to add SPL file. Currently Sabrina does not have a specific SPL file. Use Cezanne SPL file as a placeholder. BUG=b:224618411 TEST=Build and boot to OS in Skyrim after adding Sabrina specific SPL file. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I222bb81b2babddc778b2cff858ef7979f85ac0e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63313 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-14mb/google/nipperkin: Disable PSPP for WLANRob Barnes
Disable PSPP parameters for WLAN card on Nipperkin. This feature is causing S0ix resume hangs. BUG=b:227296841,b:228830362 BRANCH=guybrush TEST=Suspend stress test passes on Nipperkin Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I38f05b92ace4aba61163194a6a638915882b8871 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63593 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-14x86/mtrr: Print address ranges inclusive to be more consistentWerner Zeh
The printed address ranges in the tree (resource allocator and even some MTRR code) usually shows the range inclusive (meaning from start address to the real end address of the range). Though there is still some code in the MTRR context which prints the ranges with an exclusive end. This patch aligns the printing of ranges in the MTRR code to be consistent among the tree so that the shown end addresses are now inclusive. Change-Id: I0ca292f9cf272564cb5ef1c4ea38f5c483605c94 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2022-04-14mb/google/brya: Add variant_init and variant_finalize callbacksTim Wawrzynczak
Some brya variants may need to initialize and finalize some variant-specific devices during ramstage, therefore add the commonly-used hooks and callbacks to support this. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iede6dc5a5b9a7385fedd59d4eeaaba118eff0e20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-14soc/intel/common/gpio: Add PAD_CFG_GPI_SCI_LOW/HIGH_LOCK macroEric Lai
Add PAD_CFG_GPI_SCI_LOW_LOCK and PAD_CFG_GPI_SCI_HIGH_LOCK macro to support mainboard to lock NC and GPI_SCI pins as applicable. BUG=b:216583542 TEST=build passed Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I5060777cc09af6cb3144ad799154e77167521de3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-14soc/intel/cmn/{block, pch}: Rename configs from `DMI` to `GPMR`Subrata Banik
This patch renames all required IA common code blocks and PCH configs from DMI to GPMR. TEST=Able to build and boot google/redrix. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic6e576dd7f207eb16d90c5cc2892d919980d91c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-14soc/intel/cmn/gpmr: Enhance GPMR driverSubrata Banik
This patch enhances the GPMR driver to add public APIs for other IA common code drivers and/or SoC code to utilize. Also, migrated all PCR GPMR register definitions into the common `pcr_gpmr.h` header file. TEST=Able to build and boot google/redrix. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I87dca55a068366cb9a26a5218589166c1723da7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/63607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-14intel/common/block: rename dmi folder to gpmr as starting gpmr migrationWonkyu Kim
As a start of GPMR(General Purpose Memory Range) driver migration, 1. rename dmi folder to gpmr folder 2. rename dmi.c to gpmr.c TEST=build Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4d57f4b8bd06e0cf6c9afa4baf4a7bed64ecb56b Reviewed-on: https://review.coreboot.org/c/coreboot/+/63170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-04-14soc/amd/sabrina: Maintain a single copy of PSP Level2 entriesKarthikeyan Ramasubramanian
If verified boot uses 2 RW FW slots, configure amdfwtool to maintain single copy of PSP Level2 entries. BUG=None TEST=Build and boot to OS in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I94eea693139b714c321b4be89380342ec7a21222 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-14util/amdfwtool: Maintain one copy of PSP Level2 entriesKarthikeyan Ramasubramanian
AMDFWtool maintains 2 copies of PSP Level2 entries - one in primary slot A (Type 0x48) and another in backup slot B (Type 0x4A). On boards which use VBOOT with 2 RW firmware slots, maintaining 2 copies of PSP Level2 entries in each FW slot is redundant and space-consuming. Introduce option to maintain only one copy of PSP Level2 entries and point to it from both slots A & B. BUG=None TEST=Build and boot to OS in Skyrim. Ensure that only one copy is added to each FW slot. This achieved a space saving of 1.5 MB in each FW slot. Before: apu/amdfw 0x415fc0 raw 3043328 none After: apu/amdfw 0x415fc0 raw 1556480 none Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I06eef8e14b9c14db1d02b621c2f7207188d86326 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-04-14soc/qualcomm/common: Make clock_configure() check for exact matchesShelley Chen
Previously, clock_configure() will configure the clocks to round up to the next highest frequency bin. This seems non-intuitive. Changing the logic to find an exact frequency match and will halt booting if no match is found. Recently fixed a bug in CB:63311, where the clock was being set incorrectly for emmc and was able to find it because of this stricter check. BUG=b:198627043 BRANCH=None TEST=build herobrine image and try to set SPI frequency to number not supported. Ensure device doesn't boot. Change-Id: I9cfad7236241f4d03ff1a56683654649658b68fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2022-04-13amdfwtool: Add a flag to record the second gen instead of romsigZheng Bao
This is for future feature combo, which gets the soc id from fw.cfg in a loop instead of the command line, and the romsig is not set until fw.cfg is processed. Change-Id: Id50311034b46aa1791dcc10b107de4af6c86b927 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-04-13soc/intel/cmn/xhci: Add function to reset the XHCI controllerSubrata Banik
This patch adds `xhci_host_reset()` to reset XHCI controller and the scope of this function is with SMM hence, compiling xhci.c for SMM as well. Also, refactored `xhci.c` code to keep PCI enumeration within the scope of `ramstage` alone hence, guarded with `ENV_RAMSTAGE` env_variable. BUG=b:227289581 TEST=Able to perform a call from `xhci_host_reset` from S5 smi handler. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie0dc0a64044f291893931726d26c08c8b964a3cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/63551 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-13cpu/x86/mtrr: Use `need_restore_mtrr` to set put_back_original_solutionSubrata Banik
This patch calls into need_restore_mtrr() from the mtrr_use_temp_range function to set `put_back_original_solution` to discard any temporary MTRR range prior to boot to payload. BUG=b:225766934 TEST=Able to build and boot google/brya to verify that `remove_temp_solution()` is able to discard any temporary MTRR range before booting to payload. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I2e00ec593847e1eb173d5ac77b15b50342860f89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-04-13cpu/x86: Add function to set `put_back_original_solution` variableKane Chen
`put_back_original_solution` variable in mtrr.c is static, but there is a need to set put_back_original_solution outside of mtrr.c in order to let `remove_temp_solution` to drop any temporary MTRRs being set outside `mtrr_use_temp_range()`, for example: `set_var_mtrr()` function is used to set MTRRs for the ROM caching. BUG=b:225766934 TEST=Able to build and boot google/redrix. Change-Id: Ic6b5683b2aa7398a5e141f710394ab772e9775e7 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-04-13mb/google/guybrush/var/nipperkin: probe privacy screen device by fw_configKevin Chiu
BUG=b:228448327 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage check ACPI device "LCD" in SSDT Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: I42c5abdbe3bfab72016d56399278a7aff9e33377 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-04-13soc/qualcomm/common: Fix mem_chip_info bugs in QcLib glueRavi Kumar Bokka
This patch fixes an issue introduced by CB:59195 when QcLib doesn't return a mem_chip_info structure to coreboot, and solves some other minor leftover issues from that patch. BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I0d59669adaf287d0eb7b58ccb0fe3f98e3d23281 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-13mb/google/guybrush: Disable EN_SPKR on init on Nipperkin and DewattYu-Hsuan Hsu
We don't want to enable the speaker on init. It will be enabled while using GPIO AMP codec in depthcharge. BUG=b:223289882 TEST=boot Nipperkin and Dewatt and then verify the devbeep and gpio values in kernel Signed-off-by: Yu-Hsuan Hsu <yuhsuan@google.com> Change-Id: Id874421d7464b15be6e521576696bb97e6b22d6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-13soc/intel/alderlake: Add support for UFS controllerMeera Ravindranath
UFS(Universal Flash Storage) is the next generation storage standard and a SCSI storage technology. It is also a successor of eMMC. Following changes are needed to add support for UFS - 1) Add UFS controller to chipset.cb and keep it off by default 2) Hook up FSP enable UPD for UFS #1 to the device from chipset.cb Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: I92f024ded64e1eaef41a7807133361d74b5009d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-13soc/intel/alderlake: Allow mainboard to configure USB2 Phy power gatingSridhar Siricilla
The patch adds mechanism in the Alder Lake SoC code to control PCH USB2 Phy power gating from brya board variant's devicetree. Please refer Intel doc#723158 for more information. BUG=b:221461379 TEST=Build and boot Gimble board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I3d80a3e36c6f8a3c0f174f955b11457752809f4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-13drivers/i2c/designware/dw_i2c: Remove unnecessary tabs in debug logReka Norman
Before: [DEBUG] dw_i2c: SoC 400/3000 ns Bus: 400/1000000 ns [DEBUG] dw_i2c: period 334 rise 13 fall 2 tlow 174 thigh 80 spk 7 [DEBUG] dw_i2c: hcnt = 104 lcnt = 202 sda hold = 7 After: [DEBUG] dw_i2c: SoC 400/3000 ns Bus: 400/1000000 ns [DEBUG] dw_i2c: period 334 rise 13 fall 2 tlow 174 thigh 80 spk 7 [DEBUG] dw_i2c: hcnt = 104 lcnt = 202 sda hold = 7 BUG=None TEST=Check that the formatting looks correct, as above. Change-Id: I6703a5d6512cee7848edae27afcfd82eb89bcacb Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-13mb/google/brya/baseboard/nissa: Configure I2C lcnt and hcntReka Norman
Configure lcnt and hcnt directly to give the required frequency, tHIGH and tLOW, instead of using rise and fall times. Aim for a frequency of 390 kHz to make sure it doesn't exceed 400 kHz on different boards. BUG=b:227517802 TEST=Probe the clock line and check that it meets the requirements for frequency, tHIGH and tLOW. Change-Id: I4d4f877c1f0cd9aacd3fa152890b7ef82e059f78 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-13mb/google/brya: Create craask variantTyler Wang
Create the craask variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:None BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_CRAASK Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Icf03e3f18468d7dd207ab200fa2dcf96afd02f8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/63256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-13mb/google/brya: Add missing parameter name to variant_generate_s0ix_hookReka Norman
Fixes the following build error: src/mainboard/google/brya/mainboard.c: In function 'variant_generate_s0ix_hook': src/mainboard/google/brya/mainboard.c:157:40: error: parameter name omitted void __weak variant_generate_s0ix_hook(enum s0ix_entry) ^~~~~~~~~~~~~~~ BUG=None TEST=`abuild -a -x -c max -p none -t google/brya` now succeeds Change-Id: Id578766e2a3b7647e920740dde3e356a7db39d4d Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-13mb/google/brya/var/nereid: Enable OZ711LV2LN SD card controllerReka Norman
Select the Bayhub LV2 driver, and implement power sequencing as per the datasheet. BUG=b:223304542 TEST=Check that connecting an SD card works as expected in the OS. Probe the EN and RST signals and check the timing requirements are met. Change-Id: Id1cca2024e06e5b2c7cefd22aa0b735bc542dc3b Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-04-13mb/google/brya/var/brya0: Change MAX98360 AMP interface to I2S1Amanda Huang
Based on the latest schematic, change MAX98360 AMP interface from I2S2 to I2S1 due to Intel BT offload concern. BUG=b:202671753 BRANCH=firmware-brya-14505.B TEST=dmidecode -t 11 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Change-Id: I9ee45dbceabdedd39a9befffb8002b8bc3d4bfb4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-13mb/intel/adlrvp: Disable PM Timer for ADL-NUsha P
Keeping the PM timer enabled will disqualify an ADL system from entering S0i3, and will also cause an increase in power during suspend states. The PM timer is not required for ADL-N boards, therefore disabling it. BRANCH=NONE TEST=Build and boot ADL-N RVP. Verify system is entering S0i3 state. localhost ~ # cat /sys/kernel/debug/pmc_core/substate_residencies Substate Residency S0i2.0 0 S0i3.0 13196801 Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I44651bf55df8e71a0a5a9a33ecbb8322ecd18575 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-04-13payloads/LinuxBoot: Fix u-root branchArthur Heymans
It looks like the u-root 'master' branch was renamed to 'main'. Change-Id: I384ba66289a49bf226b505615bd16bdf85612c1a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62590 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-13commonlib/bsd: Add mem_chip_info_size() functionRavi Kumar Bokka
Add a helper function mem_chip_info_size() as the size of mem_chip_info structure is used in multiple places. BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Iaada45d63b82c28495166024a9655d871ba65b20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63407 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-12soc/intel/alderlake/include/soc/iomap.h: Add ADL PCH-S reserved spacesMichał Żygowski
PCH-S maps certain MMIO BARs differently than low power PCHs. The reserved ranges taken from Intel DOC #630603. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ifefedc629def207ecd6f7be792f6e12fb6016cc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-12checkpatch.conf: Disable gerrit change ID for corebootMartin Roth
The GERRIT_CHANGE_ID Error is useful for the linux flow, but since coreboot uses gerrit, giving an error on the ID doesn't make sense. Change-Id: I7f6efb5559027ed9497ee85497bb4b4e786f9901 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-12mb/google/brya/var/vell: add WWAN power sequence setting for vellRobert Chen
Add WWAN power sequence setting to meet spec BUG=b:220084872 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: If6d3f965b8f6b6753446f55a8bd47d3b0c1ae7be Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-12soc/intel/common: register generic LPC resourcesMichael Niewöhner
Register the generic LPC memory/IO ranges with the resource allocator. TEST: set ranges and check the coreboot log Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I9f45b38498390016f841ab1d70c8438496dc857e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-04-11cpu/x86/smm: Add sinkhole mitigation to relocatable smmstubArthur Heymans
The sinkhole exploit exists in placing the lapic base such that it messes with GDT. This can be mitigated by checking the lapic MSR against the current program counter. Change-Id: I49927c4f4218552b732bac8aae551d845ad7f079 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11src/mb/facebook/fbg1701: Remove IGNORE_IASL_MISSING_DEPENDENCYFrans Hendriks
CB:63242 solves the missing dependency on _PRS. The config IGNORE_IASL_MISSING_DEPENDENCY can be removed. BUG=N/A TEST=Boot facebook FBG1701 Change-Id: I014a9078cb12908c515a978e4111ff9facc9e443 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11src/mb/facebook/fbg1701/acpi/superio.asl: Remove _PRSFrans Hendriks
IASL report warning since _SRS is required. Fixed configuration is always enabled. _CRS is sufficient, remove _PRS BUG=N/A TEST=Boot facebook FBG1701 Change-Id: Ib9e004e192bc7f9680c3728ce7c60d56f1a13945 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11mb/prodrive/atlas: Configure eSPI IO decode ranges for ECLean Sheng Tan
This implementation adds eSPI IO decode range for EC. 1. 0x800-0x8FF / 0x200-020F: EC host command range. 2. 0x900-0x9ff: EC memory map range. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I787561287025e33a8622eb9b3565fa14d0416c46 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11mb/prodrive/atlas: Disable ASPM for i225 portLean Sheng Tan
I225 doesn’t support ASPM, so disable it at the root port. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I61fe3760c1cde60795c9b52c703e521ba4df504a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11util/lint/checkpatch.pl: Update to v5.18-2 lines related to "codespell"Elyes Haouas
Change-Id: I55cc4255ea88723c813a04d87e4c028c64f92dbd Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-04-11payloads/tianocore: Don't declare tools directory twiceSean Rhodes
EDK_TOOLS_PATH is set on lines 85 and 137. Remove the instance on 85. edk2 still builds correctly. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0c837f14693941afec194b140c93d786ea784e53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11mb/prodrive/atlas: Update GPIOsLean Sheng Tan
Update Atlas GPIOs for GPD11 & E7. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I92a0d0797206cdba96d7c6efe264b0356b5157ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/63411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11mb/prodrive/atlas: Update correct SPD addressLean Sheng Tan
Update the SPD address as Atlas is using DIMM 0 & 1 in memory controller 1 channel 1. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: Icefcd23b57a7f97e1ee25fed20b35d0e2cb51145 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11cpu/x86/smm_module_loader.c: Clean up printing the CPU mapArthur Heymans
There is no reason to do this in a separate loop. Change-Id: I7fe9f1004597602147aae72f4b754395b6b527cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11soc/intel/alderlake/bootblock/pch.c: Enable SIO 4e/4f ports decodingMichał Żygowski
Some Super I/Os may be strapped to respond on the secondary ports 0x4e/0x4f. Enable them early so that mainboard is able to initialize a serial port for example. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I6df158f54a48fb9f3173a4b209316c8116aa265a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-11soc/intel/alderlake/Kconfig: Set correct P2SB BAR for ADL PCH-SMichał Żygowski
According to Intel DOC #630603 P2SB BAR must be at 0xe0000000 for PCH-S. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie6db3f7108ff1edf62c94876412adfc6421034d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-11soc/intel/alderlake/include/soc/bootblock.h: Allow to build with PCH-SMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I1461a8cc3c131a6e2499df8e1ebc67f5fb3b9e35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-11soc/intel/alderlake: Select FSP2.3 for ADL-SMichał Żygowski
The FSP available at Intel R&DC kit #1000166 indicates FSP version 2.3 in the FSP headers. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0af7faa603cb19b530513f531a28bd8b283baba2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-11soc/intel/alderlake: Introduce PCH-S symbolMichał Żygowski
Introduce SOC_INTEL_ALDERLAKE_PCH_S symbol to differentiate from the low power chipsets. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I47676723747458b8b7fe726e900843c198901bda Reviewed-on: https://review.coreboot.org/c/coreboot/+/63455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-11soc/intel/adl: Disable FSP debug output if !FSP_ENABLE_SERIAL_DEBUGSubrata Banik
This patch binds all FSP-M and FSP-S UPDs required for serial redirection with `FSP_ENABLE_SERIAL_DEBUG` config to allow coreboot to choose when to enable FSP debug output redirection to serial port. For example: PcdSerialDebugLevel => For controlling FSP debug level between FSP-M/S SerialDebugMrcLevel => For controllig MRC debug level. With this change FSP debug output will only be enabled when the user enables `FSP_ENABLE_SERIAL_DEBUG` from site-local config with coreboot serial image. BUG=b:225544587 TEST=Able to build and boot brya. Also, the FSP debug log is exactly the same before and with this code change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I779c56b8b0fdebf45ea85b3b456a2d8066e26489 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63167 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-11drivers/intel/fsp2_0: Allow coreboot to control FSP serial redirectionSubrata Banik
Commit 3ba6f8cdf (drivers/intel/fsp2_0: Add native implementation for FSP Debug Handler) implements a native FSP debug handler. However, coreboot still can't control when to redirect FSP debug output to the serial console, i.e., at present, integrating a FSP debug binary is enough to output FSP serial messages irrespective of whether user is intended to see FSP debug log. coreboot needs additional mechanism to control FSP debug binary to redirect debug messages over serial port. This patch introduces a config `FSP_ENABLE_SERIAL_DEBUG` to control the FSP debug output, user to enable this config from site-local config file in case like to override the default FSP serial redirection behaviour in more controlled way from coreboot. There could be scenarios as below: Scenario 1: coreboot release image integrated with the FSP debug binaries, is capable of redirecting to the serial console, but coreboot decides to override the config as below to skip FSP debug output redirection to the serial port. `#`FSP Serial console disabled by default (do not remove) `#`CONFIG_FSP_ENABLE_SERIAL_DEBUG is not set Scenario 2: For coreboot serial image with FSP debug binaries integrated but coreboot decides to skip FSP debug output redirection to the serial port. `#`FSP Serial console disabled by default (do not remove) `#`CONFIG_FSP_ENABLE_SERIAL_DEBUG is not set CONFIG_CONSOLE_SERIAL=y CONFIG_CONSOLE_SERIAL_115200=y CONFIG_UART_DEBUG=y CONFIG_UART_FOR_CONSOLE=0 Scenario 3: The final image could be a coreboot serial image with FSP serial redirection enabled to output to the serial port. CONFIG_FSP_ENABLE_SERIAL_DEBUG=y CONFIG_CONSOLE_SERIAL=y CONFIG_CONSOLE_SERIAL_115200=y CONFIG_UART_DEBUG=y CONFIG_UART_FOR_CONSOLE=0 BUG=b:227151510 TEST=Able to build and boot google/redrix with all scenarios between #1--#3 and able to meet the expectation as mentioned above. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I0b008ca9d4f40bfa6a989a6fd655c234f91fde65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-10nb/intel/sandybridge: Restore `mainboard_early_init()` callAngel Pons
Commit 7a874330919a4df9cc5b66058b4340465b7ea041 (mb/google,samsung: Drop init_bootmode_straps()) got rid of the `mainboard_early_init()` function call and weak definition in Sandy Bridge code. However, this function is still used by several Sandy Bridge mainboards, so bring back the dropped call and weak definition. The aforementioned commit did not cause any build-time errors because it did not remove the `mainboard_early_init()` function declaration. Change-Id: I82768e9a187696d42b61be44d4aa048acc19d551 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-04-09mb/google,samsung: Drop init_bootmode_straps()Kyösti Mälkki
Change-Id: Idcaf30c622bf5dc0f1295f2639c656086d01ff7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-08src/mb/facebook/fbg1701: Verify FSP and SPD binaries in bootblockFrans Hendriks
romstage uses FSP and SPD before these are verified. Verify the FSP and SPD binaries in bootblock and measure these in romstage. BUG=N/A TEST=Boot Facebook FBG1701 and check log for FSP and SPD verified in bootblock. Change-Id: I061affa5111fb14d69a8459575e0c72f71b1a1aa Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63446 Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-08IASL: Correct warning message for IASL missing dependencyFrans Hendriks
Warning for _SRS includes _SRS. Warning for _DIS includes must have _SRS twice. Remove requirement _SRS for _SRS is present. Removed second _SRS for _DIS is present. BUG=N/A TEST=Verify correct message on built of facebook FBG1701 Change-Id: I1be740354b159e931e41323aef14e160cc09af19 Signed-off-by: Frans Hendriks <fhendriks@eltan.com>´ Reviewed-on: https://review.coreboot.org/c/coreboot/+/63250 Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-08soc/intel/apollolake: Correct enum for PrimaryVideoAdaptor FSP parameterWerner Zeh
Commit 1a4496e79f21 (soc/{apl,glk}: Allow to select the primary graphics device) adds code to set the FSP parameter 'PrimaryVideoAdaptor' based on the enum description of the FspmUpd.h for Apollo Lake. Unfortunately, the comment in the header file does not match the implementation in the FSP and hence setting PrimaryVideoAdaptor to 'GPU_PRIMARY_IGD' will be treated as if the selection was 'GPU_PRIMARY_PCI'. This in turn leads to Linux gfx driver issues for earlier driver implementations. This commit corrects the enum values for the FSP parameter to match the implementation. TEST=Boot into Linux on mc_apl1 and verify that graphics works. Change-Id: Iedbc144fa809f6d4587f5223b235ee95579c48f7 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-04-08soc/intel/common/cse: Show CSE device slot and function number properlySubrata Banik
This patch fixes a problem where the `is_cse_devfn_visible` function is unable to show the CSE device slot and function number properly.  BUG=b:211954778 TEST=Able to display CSE device slot and function number properly as below: Before: [DEBUG]  PCI: 00:16.0 final [WARN ]  HECI: CSE device 00.0 is disabled [WARN ]  HECI: CSE device 00.0 is disabled [WARN ]  HECI: CSE device 00.0 is disabled [WARN ]  HECI: CSE device 00.0 is disabled [WARN ]  HECI: CSE device 00.0 is disabled With this code changes: [DEBUG]  PCI: 00:16.0 final [WARN ]  HECI: CSE device 16.1 is disabled [WARN ]  HECI: CSE device 16.2 is disabled [WARN ]  HECI: CSE device 16.3 is disabled [WARN ]  HECI: CSE device 16.4 is disabled [WARN ]  HECI: CSE device 16.5 is disabled Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I76a634c64af26fc0ac24e2c0bb3a8f397a65d77b Reviewed-on: https://review.coreboot.org/c/coreboot/+/63406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-08soc/intel/cse: Allow calling all functions associated with `cse_final`Subrata Banik
This patch fixes a problem where `cse_final` only calls into 1 function from available `notify_func` lists. BUG=b:211954778 TEST=Able to execute `cse_final_end_of_firmware` function as part of `cse_final` call. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I04d8c9c1213ddeb9ed85473e62fcca298c0d5172 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-07mb/google/brya/var/taniks: Enable Genesys L1 max entry delayJoey Peng
The workaround causes the eMMC controller to not enter its L1 during the boot process BUG=b:220079865 TEST=Build FW and run stress exceed 2500 cycles. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I2a5888e943c1ebf83a54f9b172f986f8b13d9b6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-07soc/intel/common: Update CSE sub partition updateSridhar Siricilla
The patch adds support in the CSE Sub partition update procedure to use GET_BOOT_PARTITION_INFO HECI command output to create the region device for CSE RO and CSE RW. The GET_BOOT_PARTITION_INFO HECI command provides CSE's RO and RW boot partition information. Existing code relies on FMD file to get the CSE's boot partition's (CSE RO and CSE RW) start and size details. This change make independent of FMD file declaration with respect to CSE RO and CSE RW. TEST=Build and verify the CSE RO and CSE RW region device information through code instrumentation. Also, did boot test on Kano system. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ie9a83b77ab44ea6ffe5bb20673e109a89a148629 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-07MAINTAINERS: lower maintenance level of super I/O and superiotoolFelix Held
I don't really get around to review super I/O or superiotool patches any more, so lower the maintenance level of those. If anyone else wants to step up as new maintainer for those two, feel free to do so. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id7bd3c68c1adc0db82dab078291918742b453d4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/63417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-07ChromeOS: Add DECLARE_x_CROS_GPIOS()Kyösti Mälkki
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-07ec/google/chromeec: Initialize device_path subidAkihiko Odaki
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Change-Id: I910998a5555319cf9840493a31df4934054e08ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/63384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 18:37:32 +0000