| Age | Commit message (Collapse) | Author |
|---|
|
This change sets the SMBUS device to min sleep state D0 in the ACPI
sleep state table.
TEST=Able to build and boot google/fatcat.
w/o this patch:
[WARN ] Unknown min d_state for PCI: 00:1f.4
w/ this patch:
No Error or Warning.
Change-Id: If84d2ee8abfef34f6411e01e6c37d4e2008a3666
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84909
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit defines the EC_SYNC_IRQ and GPIO_PCH_WP macros for
different Fatcat variants.
The EC_SYNC_IRQ macro is used for tight timestamps and wake support,
while the GPIO_PCH_WP macro is used for the WP signal to the PCH.
These macros were previously undefined or incorrectly defined for some
variants. This commit fixes these issues and ensures that the macros
are defined correctly for all variants.
Specifically, this commit:
- Defines EC_SYNC_IRQ and GPIO_PCH_WP for Fatcat Nuvo and Fatcat ITE.
- Defines EC_SYNC_IRQ as 0 (not connected) for Fatcat.
- Defines GPIO_PCH_WP as GPP_D02 for Fatcat.
- Leaves EC_SYNC_IRQ and GPIO_PCH_WP as 0 (TODO) for Francka.
TEST=Able to build and boot google/fatcat.
w/o this patch:
```
cros_ec_lpcs GOOG0004:00: couldn't retrieve IRQ number (-22)
cros_ec_lpcs GOOG0004:00: probe with driver cros_ec_lpcs failed with error -22
```
w/ this patch:
```
cros_ec_lpcs GOOG0004:00: Chrome EC device registered
```
Change-Id: I9bd248496f08869c08cf6daafeed6584d0b166b7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
This patch updates the flash map layout to guarantee that the
RW_SECTION_B section starts at the 16MB boundary.
Additionally, fix typo in flash descriptor comment, where comment
incorrectly referred to "MTL" instead of "PTL".
TEST=Successfully builds google/fatcat.
Change-Id: Ia6dba611fba50f9694a75670d954a4630cde4d70
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84899
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This to fix the error when using C23:
cannot cast an object of type 'nullptr_t' to 'uintptr_t' (aka 'unsigned long')
return (uintptr_t)NULL;
^
Change-Id: Ibdc8794513a508fc61a5046692f854183c36b781
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Use the resource size to determine Vtd BAR size and drop the code to
calculate the Vtd BAR size.
While on it do not truncate the resource address to 32-bit, since the
DMAR entry is 64-bit wide anyway.
TEST: Booted on intel/archercity_crb
Change-Id: Ibaadc25c44345ba2eb9e6f75989d32b43d00d7a5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Align DSDT names with SSDT naming scheme, as provided by
iio_domain_set_acpi_name() and hide unused devices by implementing
the _STA method as done on newer platforms.
Change-Id: I8488907f28a78a6f71046dba54ba9cbd4b0652eb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Get rid of some helper functions by properly using a pci_driver.
Configure SAD if necessary and lock SAD if necessary in the newly added
SAD PCI driver. This allows to drop lock_pam0123(), unlock_pam_regions()
and socket0_get_ubox_busno().
- Fixes SAD instance on secondary sockets not decoding the C-F segments
as DRAM, which would prevent those sockets to access the ACPI/SMBIOS
table anchor
- Adds PCI multi segment support
(SKX and CPX only, other were working properly already)
- Moves locking of PAM0123_CSR and PAM456_CSR from SoC to driver code
Change-Id: I167b6ce48631fe3f97359ee33704f52ca854dbd1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84794
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set characteristics 1 based on slot type and scan PCI capabilities
to update the characteristics 2 field in SMBIOS type 9 accordingly.
Change-Id: If96e0381b10c25cf73b3797a0f02a40dc933993e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
Add a helper method to read the PME capability.
Will be used in the following commit.
Change-Id: Id1fdc98c9ce86d3ddf8056bb609afc58008cf2e9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84793
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add the code to request the provisioning of the RPMC root key from the
PSP. When RPMC hasn't already been provisioned enabled and the PSP has
detected a SPI flash chip that both supports RPMC and has monotonic
counters that can still be provisioned, we send the PSP mailbox command
to request the RPMC provisioning and then reset the system, so the PSP
can do the actual provisioning.
TEST=On an out of tree AMD reference board using the Cezanne SoC code,
provisioning RPMC works as expected when selecting the corresponding
PERFORM_RPMC_PROVISIONING Kconfig option:
1st boot to initiate the RPMC provisioning:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC isn't provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 can still be provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 can still be provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
[DEBUG] RPMC: perform fusing using RPMC counter address 0
[DEBUG] OK
[NOTE ] RPMC: Rebooting
[INFO ] warm_reset() called!
2nd boot after the provisioning is done:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC is provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 has already been provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 has already been provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7760c0bf7618ca60ef160329d0110ac8109032a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84707
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the code to query the status of the replay-protected monotonic
counter (RPMC) infrastructure from the PSP and display it in a decoded
form.
Certain SPI flash chips have 4 32-bit monotonic counters in addition to
the actual flash storage. During the RPMC root key provisioning process,
which is done at the end of manufacturing, a 256 bit RPMC root key is
generated by the PSP and programmed into both SoC fuses and the RPMC SPI
flash chip. After that, commands to read or increment the monotonic
counters can be sent to the SPI flash which are protected by a
HMAC-SHA-256 signature using a key derived from the provisioned RPMC
root key.
The code to do the RPMC provisioning is added in a follow-up patch.
TEST=On an out of tree AMD reference board using the Cezanne SoC code
and with the SOC_AMD_COMMON_BLOCK_PSP_RPMC Kconfig option selected, the
newly added code prints this on the console after the provisioning was
done:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC is provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 has already been provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 has already been provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I498eec58189da710b725ac6575c68ba7ab0bcc43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84706
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The functions psp_get_ftpm_capabilties, psp_get_hsti_state, and
psp_get_psp_capabilities which were added in commit 5e7ab1a23346
("soc/amd/common/psp: add helper functions to retrieve capability bits")
have a bug in the 'cmd_status' error handling logic. In case of an
error, 'cmd_status' is non-zero, while the check somehow expected the
opposite. Fix the bug by returning an error if 'cmd_status' is non-zero.
Change-Id: Iafcd185ec4a8a4c0e463b0ac5bac3ef78a0af305
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84836
Reviewed-by: Ana Carolina Cabral
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
When creating variant, it was copied from teliks, and according to the requirements of telith project, update the override devicetree to use ELAN touchscreen.
BUG=b:373510302
BRANCH=None
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. power on proto board successfully
3. touchscreen is functional
Change-Id: If0da85a38f3a68b6f50cfd096a628174b313fcc9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84865
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Create the rull variant of the nissa reference board by copying
the template files to a new directory named for the variant.
And based on schematics NB7559_MB_SCH_V1_2024_1010.pdf
update devicetree settings.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0)
BUG=b:374673463
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_RULL
Change-Id: If48273f3e9db69507b41ea0313916d94ecabe309
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change enables the integrated GPU (iGPU) display on the Fatcat
board based on the FW_CONFIG setting (specifically the DISPLAY bit).
By conditionally probing the display based on FW_CONFIG, the iGPU
is dynamically enabled or disabled according to the SKU configuration.
TEST=Verified display functionality on Fatcat with the iGPU:
> cbi set 6 0x58A814 4 (DISPLAY_ABSENT):
- lspci does not list the iGPU.
- No display output, but the device boots to the OS (verified via
console).
> cbi set 6 0x5CA814 4 (DISPLAY_PRESENT):
- lspci lists the iGPU.
- Display output is functional, showing firmware and OS UI.
Change-Id: I5762adf5ec8a86a00c16544670cb2f998055bd35
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84877
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The iGPU device is enabled by default in the Pantherlake chipset
configuration. Remove the redundant device entry in the Fatcat
devicetree.
This change ensures that the iGPU remains enabled without explicit
configuration in the board-specific devicetree.
TEST=Able to build google/fatcat and able to see firmware and OS
display/UI.
Change-Id: I9a2ec9b47acb389f5bb6b30e61352aaefa327328
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84876
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add PCIe domain support.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I3e06dfaf79924cd5352348afaa526fc7dedbb540
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84700
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCIe support for mt8196.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I9c0aaa1c6da8c247b319e7ed2317dd871e276461
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84698
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a trivial mainboard_needs_pcie_init implementation that always
return true. For now, the storage types of rauru SKUs are still unknown.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I6b4f08e15f62da18aa37226075894f2827a9e7ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84697
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCIe driver for MT8196 platform.
According to the PCIe CEM specification, the deassertion of PERST#
should occur at least 100ms after the assertion. To ensure the 100ms
delay requirement is met and to save delay time in the ramstage, add
an early init data region to store the elapsed time since assertion.
This will speed up the boot time by 100ms.
PCIe port 1 and port 2 share the same PCIe resources, but PCIe port 2 is
not used. Therefore, in mtk_pcie_pre_init(), make sure PCIe port 2 is
reset to prevent interference with PCIe port 1.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I826a96822e88972bcd4966b6681797a646adf3d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
To reduce duplicate pcie.h in other SOC folder, mocw pcie.h to
mediatek/common folder
TEST=Build pass
BUG=b:317009620
Change-Id: I8e29ed4027433700652b07b3461eeb8546d45c9b
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Use the -W (--fail-on-warning) flag of sphinx-build to tell it to exit
with an error if any warnings are generated. This is intended to fail
the coreboot-docs-gerrit build to help catch issues.
To allow all warnings to be output in the same build, use the
--keep-going flag so that the author is able to see all issues and
address them after a single build. Note that this behavior is enabled by
default as of Sphinx 8.1 and this option may be removed in the future.
It is added here for compatibility with older versions of Sphinx,
including the doc.coreboot.org container which uses 7.2.6.
Change-Id: I3aa564b79d4d4125a3800023b1b805bf4a50b10a
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Ditaa is a utility to convert ascii block diagrams into bitmap graphics.
The latest sphinx-contrib-ditaa extension has not been updated since
2022 [1] and does not declare whether it is safe for parallel reading,
causing sphinx to issue a warning as we use the `-j auto` flag to
parallelize the build. It doesn't seem like anyone ever used it in the
docs aside from a now abandoned patch [2], so just remove it.
[1] https://pypi.org/project/sphinxcontrib-ditaa/
[2] https://review.coreboot.org/c/coreboot/+/37643
Change-Id: I460ce24aab203cbb416888787fc6e2c613d306b3
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84887
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Util_readme adds comments to the top of the generated Doc/util.md file
to indicate that it is generated and should not be edited directly.
These comments are not intended to show up in the rendered HTML output.
Since Markdown does not have a native way of adding comments, the
`[comment text]: #` syntax is often used to mark the line as a comment.
This takes advantage of the fact that references (often used throughout
the docs to list long URLs at the end of the document and reference them
in inline links) aren't rendered. However, MyST parser detects these as
a duplicate reference and issues a warning, since both lines use "//" as
the comment text.
Address this by using HTML comments, since Markdown also allows raw HTML
to be used. This seems like a cleaner option compared to repurposing
references and appears to have better compatibility with various
Markdown readers, which may be useful if someone wants to read the
documentation outside of doc.coreboot.org.
While we are here, regenerate Documentation/util.md and util/README.md
Change-Id: Ibd4f61009c01c7b64594d88c5d86e472f0ccaa6c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Sphinx outputs "document isn't included in any toctree" warnings for a
few files in the Documentation tree, so address this by adding them to
toctrees or explicitly marking them as excluded.
- mb/starlabs/common/building.md: Add to the Star Labs toctree in
mainboard/index.md
- RFC/intel-gpio-cleanup.md: Mark as orphan to explicitly exclude it
from the docs.
- drivers/dt_entries.md: This was already accessible through an inline
link in drivers/index.md, but links do not add items to toctrees. Add
a hidden toctree listing dt_entries.md to define its heirarchy in the
documentation while preserving the inline link instead of moving the
link to a single item list like a normal toctree would. The content of
this document did not fit the existing toctree in drivers/index.md,
which appears to list drivers, while dt_entries discusses connecting
those drivers to the devicetree.
Change-Id: I5fd6851a3adf6c91d81298fc61f773dae6eeca19
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This code is never reached since the hardware uses different SoCs.
Besides, mainboard specific code should not be added to SoC code.
Change-Id: Id82d5d0b829442c35c093974c06a029259838a9a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Use tabs instead of spaces and use one line per argument for better
readability.
Change-Id: Ic1893c3cd75f825cfddf29b53d3c5ddf8efcccc2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84854
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit improves the debug messages when initializing SPI flash
windows by adding the window type (Fixed Decode or Extended Decode)
to the log output.
This makes it easier to understand which window is being initialized
and can help with debugging issues related to SPI flash access.
w/o this patch:
[INFO ] MMAP window: SPI flash base=0x1000000, Host base=0xff000000, Size=0x1000000
[INFO ] MMAP window: SPI flash base=0x900000, Host base=0xf9900000, Size=0x700000
w/ this patch:
[INFO ] Fixed Decode Window: SPI flash base=0x1000000, Host base=0xff000000, Size=0x1000000
[INFO ] Extended Decode Window: SPI flash base=0x900000, Host base=0xf9900000, Size=0x700000
Change-Id: I904f70f42fa70ea06e6f49bd44631a8491463207
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Ideally lock configuration is not applicable for early GPIO
configuration (like bootblock/romstage) and is only required for GPIO
PAD configuration by later statge (like ramstage).
The GPP_D15 pin was previously configured with LOCK_CONFIG in the
early bootblock GPIO configuration. This is not necessary and prevents
later boot stages from configuring this GPIO.
Change-Id: Ie0e648b750d7579def39ed95eab862dc3245499c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
|
|
`cbfstool add-stage' crashes with a segmentation fault when generating
the program binary out of a romstage ELF containing relocation within
the data segment.
This commit makes `parse_elf_to_xip_stage()' look for the segment to
which the current relocation applies and compute the appropriate
location within the program binary.
This issue can be reproduced by defining a global variable with a
pointer to constant data. This variable is defined within the .data
section and contains a pointer to a constant which resides in the
.text section. As a result, a relocation entry is generated in the ELF
file.
struct my_struct {
const char *name;
};
struct my_struct my_global = { .name = "EXAMPLE" };
void fun(void)
{
printk(BIOS_DEBUG, "my_global.name=%s\n", my_global.name);
}
TEST=global data structure with a pointer to a constant does not make
cbfstool crash
Change-Id: I480b4b047546c8aa4e12dfb688e0299f80283235
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Change-Id: Ia47ddd864e770162a9a6760e975f0b7dc9aac654
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Enable BT audio offload of WIFI_CNVI_WIFI6E or unprovisioned
based on fw_config.
BUG=b:373510270
TEST=Build and boot to Lotso. Verify the config from serial logs.
w/o this CL -
```
[SPEW ] -- CNVi Config --
[SPEW ] CNVi Mode= 1
[SPEW ] Wi-Fi Core= 1
[SPEW ] BT Core= 1
[SPEW ] BT Audio Offload= 0
```
w/ this CL -
```
[SPEW ] -- CNVi Config --
[SPEW ] CNVi Mode= 1
[SPEW ] Wi-Fi Core= 1
[SPEW ] BT Core= 1
[SPEW ] BT Audio Offload= 1
```
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Change-Id: I36f8c3fb24166c86d5fc4099fa9cde8cdecb9d49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84768
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch adds SPI and some accelerator device IDs for SNR platform.
IDs are from Intel Atom Processor C5100, C5300, P5300 and P5700 Product
Families EDS, doc No. 575160 rev 2.0.
Change-Id: I7bd135d788816e4c3c42ac937450cf8cdcea00bc
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84782
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:348678529
TEST=on Google Fatcat board. Set the proper CBI fw_config bit(s) and
check that the corresponding GPIO PADs are configured as expected
value accordingly.
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d54
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamirbohra@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch updates the flash map layout to guarantee that the
RW_SECTION_B section starts at a 16MB boundary.
TEST=Successfully builds google/fatcat.
Change-Id: I74ea21a8a4107d438bc03a0da182ea7e991e74bc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Nova doesn't support thunderbolt, so disable the TBT setting.
Enabling TBT also causes the system to fail to enter S3/S5 state.
S5 fail log:
24-10-21 20:23:34.610 Port 80 writes:
24-10-21 20:23:34.610 9a02 9a32 9a14 9c15 9c18 9c19 9c20 9c22 9c25 9c28 9c3f 9c43 9c44 9c4f 9c23 9a50 9a5f 9a33 9b40 9b41
24-10-21 20:23:34.620 9b42 9b47 9c80 9c81 9c82 9c83 9a61 9a63 9a03 9a04 9a05 9a06 9a07 9a0f 9a65 9a64 9c6a 9c71 9c7f 99
24-10-21 20:23:34.626 a0 a1 72 24 25 24 25 55 24 25 55 55 73 74 75 75 75 75 75 75
24-10-21 20:23:34.633 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
24-10-21 20:23:34.639 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
24-10-21 20:23:34.643 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 76 77 79 9c
24-10-21 20:23:34.649 93 7a fe 7b f8 aa ab 96 <--new
powerinfo
24-10-21 20:23:59.424 powerinfo
24-10-21 20:23:59.424 power state 4 = S0, in 0x00ff
The correct power state for S5 is G3, not S0.
BUG=b:374213121
TEST=emerge-constitution coreboot chromeos-bootimage. Booting to OS and verify S3/S5 by EC log.
Change-Id: I2bae8ae396f001dbef3322e361f9563792e1a1ef
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84838
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1. 2nd touch panel: INX N140HCN-EA1 C5
2. Set TOUCHSCREEN_ELAN9004 to value "3"
BUG=b:374899470
BRANCH=firmware-nissa-15217.B
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. Confirm command evtest and touchscreen function is workable.
Change-Id: Ic25bd46c7cb7948e920de4fd44edb87f20cf01c4
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84834
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Add the new memory support:
Samsung K3LKBKB0BM-MGCP
BUG=b:374880584
BRANCH=firmware-nissa-15217.B
TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\
part_id_gen.go ADL lp5 \
src/mainboard/google/brya/variants/glassway/memory/ \
src/mainboard/google/brya/variants/glassway/memory/\
mem_parts_used.txt"
Change-Id: I47d9fd64fa841a2cf60930c5e319a9130019b0a5
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84831
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Change-Id: I8c9d66777b69b35f4df147c141fe94694f57be31
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83902
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I475f0c7582148e9b9f86b542f753a6654e9f9135
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
|
|
Use boolean for pch_is_wpt() and pch_is_wpt_ulx().
Change-Id: Ifd1a46ebdbe08df6cc21ada100b94930b02cd7de
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
|
|
Erying is a Chinese manufacturer selling desktop motherboards with
laptop SoCs and custom shim to mount desktop coolers.
Working:
- Serial port (IT8613E 0x3f8)
- All rear USB ports (3.0, 2.0)
- Both HDMI ports
- Realtek GbE NIC
- Internal audio (ALC897/ TGL-H HDMI)
- Environment Controller (SuperIO fan control)
- All SATA ports
- All PCI-E/M.2 ports
- M.2 NGFF WiFi
- PCI-E Resizable BAR (ReBAR)
- VT-x
WIP/Broken:
- PCI-E ASPM (also broken on vendor's FW, clocks are messed up)
- S3/s0ix (also broken on stock, setting 3VSB register didn't help -
system goes to sleep, but RAM loses power)
- DisplayPort on I/O panel (seemingly a simple fix)
- One of USB2 FP connectors, as well as NGFF USB isn't mapped (yet)
- Automatic fan control (IT8613E can't read CPU_TIN at the moment)
Can be flashed using `flashrom -p internal -w build/coreboot.rom`, as
vendor hasn't enabled any protections on SPI chip.
TEST=Flash coreboot build onto the motherboard, install following PCI-E
cards: Radeon RX 7800XT, Kingston KC3000, Optane 900P, Audigy X-Fi.
Power the system up and boot into Windows 10 to check ACPI sanity, then
reboot into Fedora Linux (kernel 6.10.9) and launch 3D application, disk
benchmark, compilation at the same time to check system's stability.
Change-Id: Iffb9e357da2eb686bdcd9a9837df8a60fa94011e
Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add and use a new helper function to determine if a device is
1) a PCIe device
2) it's mark hot-plug capable
Change-Id: I61cc013844024b43808cd2f054310cb6676ba69e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
In case of a PCH-less platform, no DRHD_INCLUDE_PCI_ALL flags are
used, all PCIe integrated end points should be explicitly listed
under the DRHD they are affiliated to. Otherwise, the device MSI
setting could fail.
TESTED = Build and boot on intel/beechnutcity CRB
In CentOS Stream (5.14.0-479.el9.x86_64) 9 5.14.0-479.el9.x86_64,
without the changes, below failure logs will occur,
[ 6.908347] ------------[ cut here ]------------
[ 6.908353] WARNING: CPU: 0 PID: 8 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908374] Modules linked in:
[ 6.908379] CPU: 0 PID: 8 Comm: kworker/0:0 Not tainted 5.14.0-479.el9.x86_64 #1
[ 6.908385] Hardware name: Intel Beechnut City CRB/Beechnut City CRB, BIOS c1e9362c93be-dirty 09/25/2024
[ 6.908389] Workqueue: events work_for_cpu_fn
[ 6.908401] RIP: 0010:pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908411] Code: 90 90 90 0f 1f 44 00 00 48 8b 87 00 03 00 00 89 f2 48 85 c0 74 14 f6 40 28 01 74 0e 48 81 c7 c8 00 00 00 31 f6 e9 19 de ac ff <0f> 0b b8 ed ff ff ff c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00
[ 6.908417] RSP: 0000:ffffac47c0137c80 EFLAGS: 00010246
[ 6.908423] RAX: 0000000000000000 RBX: ffff9a0a874e2000 RCX: 000000000000009c
[ 6.908428] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9a0a874e2000
[ 6.908433] RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000001
[ 6.908437] R10: ffff9a0a8adcb258 R11: 0000000000000000 R12: 0000000000000001
[ 6.908440] R13: 0000000000000001 R14: ffff9a0a8738be00 R15: ffff9a0a874e20c8
[ 6.908443] FS: 0000000000000000(0000) GS:ffff9a0ded000000(0000) knlGS:0000000000000000
[ 6.908448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.908451] CR2: ffff9a11fffff000 CR3: 00000003cd410001 CR4: 0000000000770ef0
[ 6.908455] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6.908457] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
[ 6.908460] PKRU: 55555554
[ 6.908462] Call Trace:
[ 6.908465] <TASK>
[ 6.908470] ? show_trace_log_lvl+0x1c4/0x2df
[ 6.908484] ? show_trace_log_lvl+0x1c4/0x2df
[ 6.908492] ? msi_capability_init+0x193/0x280
[ 6.908501] ? pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908509] ? __warn+0x7e/0xd0
[ 6.908519] ? pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908527] ? report_bug+0x100/0x140
[ 6.908537] ? handle_bug+0x3c/0x70
[ 6.908545] ? exc_invalid_op+0x14/0x70
[ 6.908551] ? asm_exc_invalid_op+0x16/0x20
[ 6.908561] ? pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908569] msi_capability_init+0x193/0x280
[ 6.908577] __pci_enable_msi_range+0x1a3/0x230
[ 6.908586] pci_alloc_irq_vectors_affinity+0xc3/0x110
[ 6.908594] pcie_port_enable_irq_vec+0x3f/0x250
[ 6.908604] ? __pci_set_master+0x31/0xd0
[ 6.908614] pcie_portdrv_probe+0xdf/0x300
[ 6.908620] local_pci_probe+0x4c/0xa0
[ 6.908627] work_for_cpu_fn+0x13/0x20
[ 6.908635] process_one_work+0x194/0x380
[ 6.908643] worker_thread+0x2fe/0x410
[ 6.908649] ? __pfx_worker_thread+0x10/0x10
[ 6.908655] kthread+0xdd/0x100
[ 6.908665] ? __pfx_kthread+0x10/0x10
[ 6.908673] ret_from_fork+0x29/0x50
[ 6.908686] </TASK>
[ 6.908688] ---[ end trace 0000000000000000 ]---
Change-Id: Ib015b002f2c077f50d48c046513504bdbd5b35aa
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84315
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Gen6 Xeon-SP boards needs to be provided with platform boot policy
blob.
Change-Id: I22b944ab6bcb2b9d0797833c06410bdc523e2709
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Intel platform boot policy setting blob is linked into FIT table
as an FIT4 entry. It is required for server executing CBnT and/or
PFR without a PCH.
Please refer to chapter 4.6 of the document in below link:
https://www.intel.com/content/dam/www/public/us/en/documents/
guides/fit-bios-specification.pdf
Tool usage:
./util/cbfstool/ifittool -f <binary> -a -n <cbfs name> -t 4 \
-r COREBOOT -s <max table size>
Change-Id: I0f9fc61341430b1a35a44d50b108dcfaf31cd11c
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84305
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I79b08630753b3aceb94becc8b9d682a3d3ca8310
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84308
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id2a2946b7fdfd7fd245835afe6abc9a3f7e1a508
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Xeon-SP simics doesn't provide simulation of writable PAM-F
(Programmable Attribute Map) segment and hence coreboot needs to
enable SHADOW_ROM_TABLE_TO_EBDA to write system table pointers to
EBDA (Extended BIOS Data Area).
Change-Id: I216204987ad646a5d1655323d2725cfd3415a2d7
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Use dev_find_all_devices_on_stack() to find the PCI device on a given stack.
That way open coded duplicated code can be dropped and there's no need to call
socket0_get_ubox_busno(), which allows to drop socket0_get_ubox_busno().
In addition it adds PCI multi segment support.
Change-Id: Ib0ed177ae22112a9f2ed32199409d91cb5851ede
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84790
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The newly added enums and struct members will be used by MT8196.
BUG=none
TEST=emerge-corsola coreboot; emerge-geralt coreboot
Change-Id: I32e758cc4244114073606c418a69e0467cdf1039
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84773
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8196 has different pmif_spmi_arb and pmif_spi_arb configurations. Move
the common pmif data to a separate file in order to reuse common/pmif.c
as much as possible.
BUG=none
TEST=emerge-corsola coreboot; emerge-geralt coreboot
Change-Id: I24643ce58a57b9cc3c5220bc06a85b141b366eee
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8196 has differenet configurations from other platforms. Make
CAL_TOL_RATE and CAL_MAX_VAL as per SoC configuration in order to reuse
common/pmif_clk.c
BUG=none
TEST=emerge-corsola coreboot; emerge-geralt coreboot
Change-Id: Iefc8180e1719d9796df7457b619a8792ceb762b2
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84771
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables SOC_INTEL_DEBUG_CONSENT to set PlatformDebugOption
to Trace Ready to have the safe configurations for Panther Lake
ES SoC.
This safe configuration will be removed once the feature is fully
verified and safe to be set to the default value.
BUG=b:373915085
TEST=Build fatcat and check the platform boots without an issue.
Change-Id: I1eaabcb2e2aaff16ee4e64d1c7709b229de18459
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84823
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Fix the following error when including device/pciexp.h
src/include/device/pciexp.h: In function 'pciexp_is_downstream_port':
src/include/device/pciexp.h:42:24: error: 'PCI_EXP_TYPE_ROOT_PORT' undeclared (first use in this function)
42 | return type == PCI_EXP_TYPE_ROOT_PORT ||
by including pci_def.h.
Change-Id: Idfd36301a5e766bbe97c93afef88c97507a4c4dc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84791
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust the DSM to return 0x00 (unsupported) when no reset gpio
is passed to the driver. Leave the _RST method to comply with
the ACPI specification but omit the BTRT method as it won't do
anything.
Change-Id: I9f8e98fb4f5a22b2f7617b131a3d71cf90f5bc80
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
If project set configure_ext_fivr = 0 will cause
PchFivrVccstIccMaxControl do not set correctly.
BUG=b:361831628
TEST=Verified on Teliks360 that affected DUTs.
Change-Id: I816de9c0c507aad3b73ab29e9f72048704f4662d
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84812
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Alder Lake, Meteor Lake and Panther Lake use the effective way size
when setting up the Enhanced No-Eviction Mode (cf.
`INTEL_CAR_ENEM_USE_EFFECTIVE_WAY_SIZE').
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521b
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83947
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
On Alder Lake, Meteor Lake and Panther Lake platforms the way size to
consider for NEM+ computation is the effective way size.
On Alder Lake, the External Design Specification #627270 "3.5.2
No-Eviction Mode (NEM) Sizes" provides a way to compute the effective
way size by reading the number of CBO. Unfortunately, reading the
number of CBO is not possible on Meteor Lake and Panther
Lake. Therefore, we instead compute the effective way size as the
biggest of power of two of the way size which works across all three
platforms.
The Kconfig `INTEL_CAR_ENEM_USE_EFFECTIVE_WAY_SIZE' is introduced to
control this behavior.
The issue addressed by this commit can be observed with the following
experiment: using a 18 MB LLC SKU, set `DCACHE_RAM_SIZE` to
0x400000 (4 MB).
The number of ways that used to be computed is round(0x400000 /
0x180000) = round(2.66) = 3. 3 ways were mapped to cover the 0x400000
NEM+ region. When the bootblock code accesses memory between 3 MB and
4 MB, the core would raise a page fault exception.
The right computation is: 0x400000 / eff_way_size(0x180000) = 4. 4
ways needs to be mapped to cover the entire 0x400000 NEM+ region.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This disables C1 state auto-demotion to run the coreboot with
Panther Lake ES SoC without an issue.
This configuration will be remove later once the related features
are fully verified.
BUG=b:373915085
TEST=Build fatcat and check the platform boots without an issue.
Change-Id: I384dba2918cfd04deb90284513c204fa8c21094b
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84767
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
There is no ACPI power resource for LTE module Rolling RW101R-GL,
therefore implement the power sequence of power-on, power-off, and
reset timing from GPIO init, bootstate init callbacks, and smihandler
function.
BUG=b:368450447
BRANCH=None
TEST= Build firmware and verify on jubilant with LTE:RW101R-GL.
Measure the power on, power off, and reset timing.
Run warm boot, cold boot and suspend/resume to make sure
WWAN devcie is workable.
Change-Id: I4a205e3db777c7c225d31b6cc802883fd7167089
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update jubilant CPU PL4 from 9 watt to 14 watt for critical battery
boot. The maximum peak power is set at 14 watt which is 45W multiplied
by 32% efficiency.
Overriding power limits for AC power without battery:
PL1 (15000, 18000)
PL2 (41000, 41000)
PL4 (14)
BUG=b:364441688
BRANCH=None
TEST=Able to successfully boot on jubilant SKU1 and SKU2 with AC only.
Test on AC 65W and 45W w/o battery, and check PL4 values from log.
Change-Id: Id1e58797206a61d241f48b057b304e05c9c323d9
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84784
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi PCIe hosts M.2 E-key WLAN to fulfill
drawman_jsl_schematic_20200528.
BUG=None
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
Change-Id: If414ff1941d2d70c5f0444ac58b228ed5c95303a
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7c5477bbc248a21e21f3a640bdb81304a1bce38c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add a new Rauru follower 'Navi'.
BUG=b:341210522
TEST=emerge-cherry coreboot
Change-Id: Ia2a6c1c09b3cedc0ef7f51ec93fdabf2c07c8885
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84694
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
NAU8318 supports beep function via GPIO control. Configure the
GPIO pins and pass them to the payload.
BUG=b:343143718
TEST=Verify beep function through CLI in depthcharge successfully.
We can test with:
firmware-shell: badusbbeep
firmware-shell: devbeep
Change-Id: I79277bc1947dab517dea5aba583c5b4e0ac81bc4
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84693
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no powering-on control in the fingerprint kernel driver. The
fingerprint team of ChromeOS suggests powering-on FP MCU in the FW.
Follow trogdor to pull down FP_RST_1V8_S3_L, AP_FP_FW_UP_STRAP,
EN_PWR_FP and pull up EN_PWR_FP in ramstage for power rail to be stable.
BUG=b:340401582
TEST=measure waveform and the fingerprint works on ChromeOS
Change-Id: I05600d90fdf922faeb778a36d8a08f68c1bb4125
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84692
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Configure GPIO EINT28 (XHCI_INIT_DONE) as output, so that payloads
(for example depthcharge) can assert it to notify EC to enable USB VBUS.
BUG=b:317009620
TEST=emerge-rauru coreboot
Change-Id: I5950974435b56997626886b16d371cd8e6472e3c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84691
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
N-1 IBL (Integrated Boot Logic) codes are initially forked from
EBG (Emmitsburg PCH) codes (src/soc/intel/xeon_sp/ebg). N-1 IBL
codes are a set of stub codes to fulfill build sanity check for GNR
SoC and CRB codes before the formal codes are published.
Change-Id: I6bd5a2ed973ff91750c5ed1f9a57d30e41d8b97e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
FW_CONFIG ids
Based on Gallida360 design, we add two new options for WIFI_SAR_ID:
- WIFI_SAR_ID_INTEL_CONVERTIBLE 2
- WIFI_SAR_ID_INTEL_CLAMSHELL 3
BUG=b:372354703
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I1b58c4f572d4dbcb269d38485664ddc51e378e5e
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84779
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Create the francka variant of the fatcat reference board.
BUG=b:370666276
TEST=util/abuild/abuild -p none -t google/fatcat -x -a
make sure the build includes GOOGLE_FRANCKA
Change-Id: I372f445f7007d0d33020545a8febbce27c260e41
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84769
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add MT62F2G32D4DS-020 WT:F in the memory_parts.json and re-generate
the SPD
BUG=b:373394046
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Change-Id: I592cebf972df1e54555561b243eed42af83342e3
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Add the GPIO pad configuration to be performed before memory is set up
along with the relevant devices definition.
This patch includes:
- FW config for pre-mem GPIO PAD configuration
- Add overridetree changes used by pre-mem FW config
BUG=b:348678529
TEST=Boot on Google Fatcat board. Note this cannot be tested by itself
directly. Test with CL:84408, set the proper CBI fw_config bit(s) and
check that the corresponding GPIO PADs are configured as expected value
accordingly.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Iac1f637c21a9818512b224dc4cbe4a75dbc516ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84718
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Create the telith variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0)
BUG=372506691
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TELITH
Change-Id: I4971b9691d3dd293ca640795967c36472afef9c9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84759
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The document was moved. The current URL gives a 404.
Change-Id: If6ca74a8bf47382100da048667976958961b9320
Signed-off-by: Daniel Maslowski <info@orangecms.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Add support for Arm Neoverse N2 Reference design.
Based on Arm Neoverse N2 reference design
Revision: Release D
TEST=Build Arm Neoverse N2 & make sure there is no error.
Change-Id: I17908d3ce773d4a88924bafb1d0e9e2a043c7fbc
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add the BMC and all PCIe slots that the board implements.
There are 32 RSSDs and 2 M.2 slots.
Change-Id: Id7d72990d6997d1e8b9ce75477ce3dc571c99839
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add slot types found in SMBIOS spec 3.8.0.
Change-Id: I705529efcbf2add420fb6f4a720ec33444d46efa
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=Build & boot in IBM SBP1 system. Verified the settings are effective in FSP logs.
Change-Id: I4341ead89a2683f64c834a6981ba316fcfef4f9a
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84741
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The current panel brightness is only 360 nits. Adjust the power and
gamma to optimize the panel brightness. The brightness after adjustment
is 390 nits.
BUG=b:320892589
TEST=boot ciri with IVO_T109NW41 panel and see firmware screen
BRANCH=geralt
Change-Id: I760c37bf915bb40ad2efa7c947034cb168938f2a
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84758
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The spec tells us to clear the busy bit manually after a timeout. Do
that and wait immediately, to detect further issues early. Also fix
some related comments and prints: Failures shouldn't be debug messa-
ges. And we are talking to the PIO interface of the controller, not
the codec. So this was never about the codec being ready.
Change-Id: I4b737f8259157c01bfcd9e6631cc15d39c653d06
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83592
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add STYLUS fw_config setting.
2. Enable stylus device settings.
3. Disable the stylus GPIO pins based on fw_config.
BUG=b:364798563
BRANCH=firmware-nissa-15217.B
TEST=1. emerge-nissa coreboot
2. Confirm command evtest for stylus PRP0001:00 and workable.
Change-Id: Ifa8555eed1c31e9342a50a735fc618106f26d41a
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84713
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: I47d7b5af67563de96fb5d8c200ce186a3443728b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Add {read,write}{8,16,32,64}p macros and similar macros for clrsetbits,
setbits and clrbits.
Change-Id: If01e38663ffc1c08c553850d3210604c9b240655
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: Id0f0d309aa7d208298e8aaf77d6c5042570547e0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: I2a0ba493da327353c7489b471d4de91db30b8fc5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
commit Ia219ccc added -Wno-trigraphs to let unit-tests builds.
Change-Id: Ibfe47194daafc02f89c83f045fb73c99a7c86d5d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83453
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Linux has never supported this feature, and according to our FAE, the
Windows driver dropped support for it in 2022 so remove it.
Change-Id: I4f0b6108bb5db657490a8b9395bb99378fc63c4d
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
Add support for RTD3 for Intel Bluetooth. This is done by
controlling the enable GPIO (GPP_VGPIO_0 for most SOCs) that
exists on all wireless cards since Jefferson Peak.
The exception is GalePeak2, which uses VSEC and this driver doesn't
support that.
Change-Id: Ibea97ab0ae0a9f1eb6aaca43d831bb4ce7bdc02e
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
Print a warning when the FSP UPD for CNVi Audio Offload is enabled
without the corresponding USB ACPI driver being enabled.
Throw an error when the USB ACPI driver is enabled without the
corresponding UPD being enabled.
Change-Id: I449c43998dd379dc68a33db47a2fe51cfe5cda2f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add AOLD Method, which returns an integer based on
whether Audio Offload is enabled. Leave the existing
control of Audio Offload in `soc/soc_chip.h`. Add
`cnvi_bt_audio_offload` in the USB ACPI `chip.h` to
control the aforementioned return value.
The value in `soc/soc_chip.h` and `chip.h` should
match.
Change-Id: Idb804fb1cf0edef4a98479a6261ca68255dbf075
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84134
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
nullptr was introduced in C11 spec and gcc 4.7.
https://en.cppreference.com/w/cpp/language/nullptr
https://stackoverflow.com/questions/16256586/how-to-enable-c11-on-later-versions-of-gcc
coreboot switched to GCC 4.7.2 on October 25, 2021, prior to coreboot v4.1.
https://review.coreboot.org/c/coreboot/+/1609
GCC-13 implemented nullptr constant: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n3042.htm
So use it insted of NULL macro.
Change-Id: I7d47e692a33d739345a81f589d4329a31beeb8c5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83860
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to CB:68982, add SPDX license headers to rex template
Makefile. Without this patch, build bot may report build failed.
BUG=none
TEST=Run create_coreboot_variant.sh and check Makefile
Change-Id: I7d100a2303be063590f1389a7eed8f9a52071241
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change reiterates that the coreboot leadership may revoke a user's
privileges. This does not change anything, as it already says "The
community organizers may take any action they deem appropriate, up to
and including a temporary ban or permanent expulsion from the community
without warning".
Also add a note that the discussions are private. If someone wants to
make the issue public, the coreboot leadership can't stop them, but the
board believes in handling these issues privately.
Finally, add a note that if there's an issue with someone on the
arbitration board, issues may be taken directly to the leadership board.
Change-Id: I5e2010a16f31f892bd1761b56b96ea773877dea0
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The original URL now points to "AMD Documentation Hub" and not the
document.
Change-Id: Icc42943340132843df2387cc1203178a0774a387
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add targeted feature list for Xeon 6 coreboot. The listed features
are targeted to be supported by Xeon 6 coreboot design, while some
specific items might need fixes and improvements per community
feedback.
Change-Id: Ibecd63dfca10712223ccdd943109ba28ed668200
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84701
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When validating the FMAP against the IFD, the BIOS region is a somewhat
specical case, since the FMAP BIOS region usually does not match the IFD
BIOS region. Instead the FMAP region usually resides somewhere inside
the IFD BIOS region and the where depends on CONFIG_CBFS_SIZE.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I920a0ee246cfd2b4ae0870256357d4f285e1730d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Because we import the doimage_mv/Makefile.mk directly into the main
coreboot makefile, this was setting a global CFLAGS variable. That's not
a huge issue since coreboot doesn't use the global CFLAGS variable, but
it should be updated anyway.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iebe281ca891745c1f993df274ef75b1440059c85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
After CB:76315, TPM_RDRESP_NEED_DELAY, whose historical mission has
ended, could be removed.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I51e046fb738d2ff7a23225739de62a1a7780bc1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
TPM_RDRESP_NEED_DELAY was introduced in 2018 in CB:25322 after
observing errors with SLB9635 by Infineon. It has been confirmed
also SLB9670 and SLB9672 require a fix or delay here.
Presumably, prior to CB:4388 SLB9635 did not have this problem,
as this particular TPM shipped with samsung/lumpy Chromebook since
2011. In CB:4388 the code changed from polling the status register
(+burst_count) using a 32bit read to separated 8bit reads.
So far, experiments on samsung/lumpy and SLB9635 indicate that
it would be sufficient to add a single tpm_read_status() call
to see TIS_STS_DATA_AVAILABLE as set at the time of evaluating
the loop exit condition.
Change-Id: If5c3e93c7946ebf8226f7bba47b38253f6920c61
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Co-authored-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
