| Age | Commit message (Collapse) | Author |
|---|
|
Replace 'struct lb_uint64' with 'typedef __aligned(4) uint64_t
lb_uint64_t', and remove unpack_lb64/pack_lb64 functions since it's no
longer needed.
Also replace 'struct cbuint64' with 'cb_uint64_t' and remove
'cb_unpack64' in libpayload for compatible with lb_uint64_t.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: If6b037e4403a8000625f4a5fb8d20311fe76200a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update the build scripts to inject variant specific SPDs into APCB.
BUG=None
TEST=Build and boot to OS in Skyrim boards with all the concerned memory
parts.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3b3f6f248d54681c6f55c00660d1f2988ae906ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63600
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add supported memory parts and generate the associated DRAM part ID.
Also for MT62F2G32D8DR-031 WT:B memory part, add a custom SPD that
configures the DRAM speed at 5500 MHz. Use this custom SPD until that
part can operate at full speed (i.e. 6400 MHz).
BUG=None
TEST=Build Skyrim.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Id87e79f5d6187d57d74487841c09aa309f1450b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
APCB edit tool edits APCBs with LP4 specific SPDs. Introduce an option
to support different SPD magic so that the tool can be used to edit
APCBs with LP5 specific SPDs.
BUG=None
TEST=Build Skyrim board with LP5 specific SPDs. Build Guybrush board
with LP4 specific SPDs.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I8e96c89e4e5ce8e0567a17bf7685b69080fa1708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63598
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support to generate DRAM part ID for boards using Sabrina SoC.
BUG=None
TEST=Generate DRAM part ID for Skyrim mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ica57b12239019831f7bf93982be3c93b7f8b6986
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Setup the following acoustic noise mitigation features:
1) Slew rate for both IA and GT domains to 1/8
2) Disable Fast package C ramp
BUG=b:229046516
TEST=build and verified by power team
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ifb5700391e33818878994f205acae7ee3b1b96d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update Kconfig per Atlas usages:
1. Set EC I/O mapped UART as default UART output
2. Add EC IFD region & ACPI support
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I970de724237bcb08899aed7a4b87a23c5cdb0b48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
PSP needs SPL file to boot. Introduce the support to add SPL file.
Currently Sabrina does not have a specific SPL file. Use Cezanne SPL
file as a placeholder.
BUG=b:224618411
TEST=Build and boot to OS in Skyrim after adding Sabrina specific SPL
file.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I222bb81b2babddc778b2cff858ef7979f85ac0e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63313
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable PSPP parameters for WLAN card on Nipperkin. This feature
is causing S0ix resume hangs.
BUG=b:227296841,b:228830362
BRANCH=guybrush
TEST=Suspend stress test passes on Nipperkin
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I38f05b92ace4aba61163194a6a638915882b8871
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63593
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The printed address ranges in the tree (resource allocator and even
some MTRR code) usually shows the range inclusive (meaning from start
address to the real end address of the range). Though there is still
some code in the MTRR context which prints the ranges with an exclusive
end. This patch aligns the printing of ranges in the MTRR code to be
consistent among the tree so that the shown end addresses are now
inclusive.
Change-Id: I0ca292f9cf272564cb5ef1c4ea38f5c483605c94
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Some brya variants may need to initialize and finalize some
variant-specific devices during ramstage, therefore add the
commonly-used hooks and callbacks to support this.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iede6dc5a5b9a7385fedd59d4eeaaba118eff0e20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add PAD_CFG_GPI_SCI_LOW_LOCK and PAD_CFG_GPI_SCI_HIGH_LOCK macro
to support mainboard to lock NC and GPI_SCI pins as applicable.
BUG=b:216583542
TEST=build passed
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I5060777cc09af6cb3144ad799154e77167521de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch renames all required IA common code blocks and PCH configs
from DMI to GPMR.
TEST=Able to build and boot google/redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic6e576dd7f207eb16d90c5cc2892d919980d91c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enhances the GPMR driver to add public APIs for other IA
common code drivers and/or SoC code to utilize.
Also, migrated all PCR GPMR register definitions into the common
`pcr_gpmr.h` header file.
TEST=Able to build and boot google/redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I87dca55a068366cb9a26a5218589166c1723da7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
As a start of GPMR(General Purpose Memory Range) driver migration,
1. rename dmi folder to gpmr folder
2. rename dmi.c to gpmr.c
TEST=build
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4d57f4b8bd06e0cf6c9afa4baf4a7bed64ecb56b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
If verified boot uses 2 RW FW slots, configure amdfwtool to maintain
single copy of PSP Level2 entries.
BUG=None
TEST=Build and boot to OS in Skyrim.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I94eea693139b714c321b4be89380342ec7a21222
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
AMDFWtool maintains 2 copies of PSP Level2 entries - one in primary slot
A (Type 0x48) and another in backup slot B (Type 0x4A). On boards which
use VBOOT with 2 RW firmware slots, maintaining 2 copies of PSP Level2
entries in each FW slot is redundant and space-consuming. Introduce
option to maintain only one copy of PSP Level2 entries and point to it
from both slots A & B.
BUG=None
TEST=Build and boot to OS in Skyrim. Ensure that only one copy is added
to each FW slot. This achieved a space saving of 1.5 MB in each FW slot.
Before:
apu/amdfw 0x415fc0 raw 3043328 none
After:
apu/amdfw 0x415fc0 raw 1556480 none
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I06eef8e14b9c14db1d02b621c2f7207188d86326
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Previously, clock_configure() will configure the clocks to round up to
the next highest frequency bin. This seems non-intuitive. Changing
the logic to find an exact frequency match and will halt booting if no
match is found. Recently fixed a bug in CB:63311, where the clock was
being set incorrectly for emmc and was able to find it because of this
stricter check.
BUG=b:198627043
BRANCH=None
TEST=build herobrine image and try to set SPI frequency to number not
supported. Ensure device doesn't boot.
Change-Id: I9cfad7236241f4d03ff1a56683654649658b68fc
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
This is for future feature combo, which gets the soc id from fw.cfg in
a loop instead of the command line, and the romsig is not set until
fw.cfg is processed.
Change-Id: Id50311034b46aa1791dcc10b107de4af6c86b927
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch adds `xhci_host_reset()` to reset XHCI controller and the
scope of this function is with SMM hence, compiling xhci.c for SMM as
well.
Also, refactored `xhci.c` code to keep PCI enumeration within the scope
of `ramstage` alone hence, guarded with `ENV_RAMSTAGE` env_variable.
BUG=b:227289581
TEST=Able to perform a call from `xhci_host_reset` from S5 smi handler.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie0dc0a64044f291893931726d26c08c8b964a3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63551
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls into need_restore_mtrr() from the mtrr_use_temp_range
function to set `put_back_original_solution` to discard any temporary
MTRR range prior to boot to payload.
BUG=b:225766934
TEST=Able to build and boot google/brya to verify that
`remove_temp_solution()` is able to discard any temporary MTRR range
before booting to payload.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2e00ec593847e1eb173d5ac77b15b50342860f89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
`put_back_original_solution` variable in mtrr.c is static, but there is
a need to set put_back_original_solution outside of mtrr.c in order to
let `remove_temp_solution` to drop any temporary MTRRs being set
outside `mtrr_use_temp_range()`, for example: `set_var_mtrr()` function
is used to set MTRRs for the ROM caching.
BUG=b:225766934
TEST=Able to build and boot google/redrix.
Change-Id: Ic6b5683b2aa7398a5e141f710394ab772e9775e7
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
BUG=b:228448327
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
check ACPI device "LCD" in SSDT
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I42c5abdbe3bfab72016d56399278a7aff9e33377
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
This patch fixes an issue introduced by CB:59195 when QcLib
doesn't return a mem_chip_info structure to coreboot, and
solves some other minor leftover issues from that patch.
BUG=b:182963902,b:177917361
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I0d59669adaf287d0eb7b58ccb0fe3f98e3d23281
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We don't want to enable the speaker on init. It will be enabled while
using GPIO AMP codec in depthcharge.
BUG=b:223289882
TEST=boot Nipperkin and Dewatt and then verify the devbeep and gpio
values in kernel
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@google.com>
Change-Id: Id874421d7464b15be6e521576696bb97e6b22d6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
UFS(Universal Flash Storage) is the next generation storage standard and
a SCSI storage technology. It is also a successor of eMMC.
Following changes are needed to add support for UFS -
1) Add UFS controller to chipset.cb and keep it off by default
2) Hook up FSP enable UPD for UFS #1 to the device from chipset.cb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I92f024ded64e1eaef41a7807133361d74b5009d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch adds mechanism in the Alder Lake SoC code to control PCH
USB2 Phy power gating from brya board variant's devicetree. Please refer
Intel doc#723158 for more information.
BUG=b:221461379
TEST=Build and boot Gimble board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I3d80a3e36c6f8a3c0f174f955b11457752809f4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Before:
[DEBUG] dw_i2c: SoC 400/3000 ns Bus: 400/1000000 ns
[DEBUG] dw_i2c: period 334 rise 13 fall 2 tlow 174 thigh 80 spk 7
[DEBUG] dw_i2c: hcnt = 104 lcnt = 202 sda hold = 7
After:
[DEBUG] dw_i2c: SoC 400/3000 ns Bus: 400/1000000 ns
[DEBUG] dw_i2c: period 334 rise 13 fall 2 tlow 174 thigh 80 spk 7
[DEBUG] dw_i2c: hcnt = 104 lcnt = 202 sda hold = 7
BUG=None
TEST=Check that the formatting looks correct, as above.
Change-Id: I6703a5d6512cee7848edae27afcfd82eb89bcacb
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure lcnt and hcnt directly to give the required frequency, tHIGH
and tLOW, instead of using rise and fall times. Aim for a frequency of
390 kHz to make sure it doesn't exceed 400 kHz on different boards.
BUG=b:227517802
TEST=Probe the clock line and check that it meets the requirements for
frequency, tHIGH and tLOW.
Change-Id: I4d4f877c1f0cd9aacd3fa152890b7ef82e059f78
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Create the craask variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:None
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CRAASK
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Icf03e3f18468d7dd207ab200fa2dcf96afd02f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fixes the following build error:
src/mainboard/google/brya/mainboard.c: In function 'variant_generate_s0ix_hook':
src/mainboard/google/brya/mainboard.c:157:40: error: parameter name omitted
void __weak variant_generate_s0ix_hook(enum s0ix_entry)
^~~~~~~~~~~~~~~
BUG=None
TEST=`abuild -a -x -c max -p none -t google/brya` now succeeds
Change-Id: Id578766e2a3b7647e920740dde3e356a7db39d4d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Select the Bayhub LV2 driver, and implement power sequencing as per the
datasheet.
BUG=b:223304542
TEST=Check that connecting an SD card works as expected in the OS. Probe
the EN and RST signals and check the timing requirements are met.
Change-Id: Id1cca2024e06e5b2c7cefd22aa0b735bc542dc3b
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Based on the latest schematic, change MAX98360 AMP interface from I2S2
to I2S1 due to Intel BT offload concern.
BUG=b:202671753
BRANCH=firmware-brya-14505.B
TEST=dmidecode -t 11
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Change-Id: I9ee45dbceabdedd39a9befffb8002b8bc3d4bfb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Keeping the PM timer enabled will disqualify an ADL system from entering
S0i3, and will also cause an increase in power during suspend states.
The PM timer is not required for ADL-N boards, therefore disabling it.
BRANCH=NONE
TEST=Build and boot ADL-N RVP. Verify system is entering S0i3 state.
localhost ~ # cat /sys/kernel/debug/pmc_core/substate_residencies
Substate Residency
S0i2.0 0
S0i3.0 13196801
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I44651bf55df8e71a0a5a9a33ecbb8322ecd18575
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
It looks like the u-root 'master' branch was renamed to 'main'.
Change-Id: I384ba66289a49bf226b505615bd16bdf85612c1a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62590
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a helper function mem_chip_info_size() as the size of
mem_chip_info structure is used in multiple places.
BUG=b:182963902,b:177917361
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: Iaada45d63b82c28495166024a9655d871ba65b20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63407
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCH-S maps certain MMIO BARs differently than low power PCHs. The
reserved ranges taken from Intel DOC #630603.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ifefedc629def207ecd6f7be792f6e12fb6016cc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The GERRIT_CHANGE_ID Error is useful for the linux flow, but since
coreboot uses gerrit, giving an error on the ID doesn't make sense.
Change-Id: I7f6efb5559027ed9497ee85497bb4b4e786f9901
Signed-off-by: Martin Roth <martin@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add WWAN power sequence setting to meet spec
BUG=b:220084872
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: If6d3f965b8f6b6753446f55a8bd47d3b0c1ae7be
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Register the generic LPC memory/IO ranges with the resource allocator.
TEST: set ranges and check the coreboot log
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I9f45b38498390016f841ab1d70c8438496dc857e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The sinkhole exploit exists in placing the lapic base such that it
messes with GDT. This can be mitigated by checking the lapic MSR
against the current program counter.
Change-Id: I49927c4f4218552b732bac8aae551d845ad7f079
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CB:63242 solves the missing dependency on _PRS.
The config IGNORE_IASL_MISSING_DEPENDENCY can be removed.
BUG=N/A
TEST=Boot facebook FBG1701
Change-Id: I014a9078cb12908c515a978e4111ff9facc9e443
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
IASL report warning since _SRS is required.
Fixed configuration is always enabled.
_CRS is sufficient, remove _PRS
BUG=N/A
TEST=Boot facebook FBG1701
Change-Id: Ib9e004e192bc7f9680c3728ce7c60d56f1a13945
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This implementation adds eSPI IO decode range for EC.
1. 0x800-0x8FF / 0x200-020F: EC host command range.
2. 0x900-0x9ff: EC memory map range.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I787561287025e33a8622eb9b3565fa14d0416c46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
I225 doesn’t support ASPM, so disable it at the root port.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I61fe3760c1cde60795c9b52c703e521ba4df504a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I55cc4255ea88723c813a04d87e4c028c64f92dbd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
EDK_TOOLS_PATH is set on lines 85 and 137. Remove the instance
on 85. edk2 still builds correctly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0c837f14693941afec194b140c93d786ea784e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update Atlas GPIOs for GPD11 & E7.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I92a0d0797206cdba96d7c6efe264b0356b5157ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update the SPD address as Atlas is using DIMM 0 & 1 in memory
controller 1 channel 1.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Icefcd23b57a7f97e1ee25fed20b35d0e2cb51145
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There is no reason to do this in a separate loop.
Change-Id: I7fe9f1004597602147aae72f4b754395b6b527cf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some Super I/Os may be strapped to respond on the secondary ports
0x4e/0x4f. Enable them early so that mainboard is able to initialize
a serial port for example.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6df158f54a48fb9f3173a4b209316c8116aa265a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
According to Intel DOC #630603 P2SB BAR must be at 0xe0000000 for
PCH-S.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie6db3f7108ff1edf62c94876412adfc6421034d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I1461a8cc3c131a6e2499df8e1ebc67f5fb3b9e35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The FSP available at Intel R&DC kit #1000166 indicates FSP version 2.3
in the FSP headers.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0af7faa603cb19b530513f531a28bd8b283baba2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Introduce SOC_INTEL_ALDERLAKE_PCH_S symbol to differentiate from the
low power chipsets.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I47676723747458b8b7fe726e900843c198901bda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch binds all FSP-M and FSP-S UPDs required for serial
redirection with `FSP_ENABLE_SERIAL_DEBUG` config to allow coreboot to
choose when to enable FSP debug output redirection to serial port.
For example:
PcdSerialDebugLevel => For controlling FSP debug level between FSP-M/S
SerialDebugMrcLevel => For controllig MRC debug level.
With this change FSP debug output will only be enabled when the user
enables `FSP_ENABLE_SERIAL_DEBUG` from site-local config with coreboot
serial image.
BUG=b:225544587
TEST=Able to build and boot brya. Also, the FSP debug log is exactly
the same before and with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I779c56b8b0fdebf45ea85b3b456a2d8066e26489
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63167
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 3ba6f8cdf (drivers/intel/fsp2_0: Add native implementation for
FSP Debug Handler) implements a native FSP debug handler.
However, coreboot still can't control when to redirect FSP debug
output to the serial console, i.e., at present, integrating a FSP debug
binary is enough to output FSP serial messages irrespective of whether
user is intended to see FSP debug log.
coreboot needs additional mechanism to control FSP debug binary to
redirect debug messages over serial port. This patch introduces a
config `FSP_ENABLE_SERIAL_DEBUG` to control the FSP debug output, user
to enable this config from site-local config file in case like to override
the default FSP serial redirection behaviour in more controlled way from
coreboot.
There could be scenarios as below:
Scenario 1: coreboot release image integrated with the FSP debug
binaries, is capable of redirecting to the serial console, but coreboot
decides to override the config as below to skip FSP debug output
redirection to the serial port.
`#`FSP Serial console disabled by default (do not remove)
`#`CONFIG_FSP_ENABLE_SERIAL_DEBUG is not set
Scenario 2: For coreboot serial image with FSP debug binaries integrated
but coreboot decides to skip FSP debug output redirection to the serial
port.
`#`FSP Serial console disabled by default (do not remove)
`#`CONFIG_FSP_ENABLE_SERIAL_DEBUG is not set
CONFIG_CONSOLE_SERIAL=y
CONFIG_CONSOLE_SERIAL_115200=y
CONFIG_UART_DEBUG=y
CONFIG_UART_FOR_CONSOLE=0
Scenario 3: The final image could be a coreboot serial image with FSP
serial redirection enabled to output to the serial port.
CONFIG_FSP_ENABLE_SERIAL_DEBUG=y
CONFIG_CONSOLE_SERIAL=y
CONFIG_CONSOLE_SERIAL_115200=y
CONFIG_UART_DEBUG=y
CONFIG_UART_FOR_CONSOLE=0
BUG=b:227151510
TEST=Able to build and boot google/redrix with all scenarios between #1--#3
and able to meet the expectation as mentioned above.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0b008ca9d4f40bfa6a989a6fd655c234f91fde65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Commit 7a874330919a4df9cc5b66058b4340465b7ea041 (mb/google,samsung: Drop
init_bootmode_straps()) got rid of the `mainboard_early_init()` function
call and weak definition in Sandy Bridge code. However, this function is
still used by several Sandy Bridge mainboards, so bring back the dropped
call and weak definition.
The aforementioned commit did not cause any build-time errors because it
did not remove the `mainboard_early_init()` function declaration.
Change-Id: I82768e9a187696d42b61be44d4aa048acc19d551
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Idcaf30c622bf5dc0f1295f2639c656086d01ff7e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
romstage uses FSP and SPD before these are verified.
Verify the FSP and SPD binaries in bootblock and measure these in
romstage.
BUG=N/A
TEST=Boot Facebook FBG1701 and check log for FSP and SPD verified in
bootblock.
Change-Id: I061affa5111fb14d69a8459575e0c72f71b1a1aa
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63446
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Warning for _SRS includes _SRS.
Warning for _DIS includes must have _SRS twice.
Remove requirement _SRS for _SRS is present.
Removed second _SRS for _DIS is present.
BUG=N/A
TEST=Verify correct message on built of facebook FBG1701
Change-Id: I1be740354b159e931e41323aef14e160cc09af19
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>´
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63250
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 1a4496e79f21 (soc/{apl,glk}: Allow to select the primary graphics
device) adds code to set the FSP parameter 'PrimaryVideoAdaptor' based
on the enum description of the FspmUpd.h for Apollo Lake.
Unfortunately, the comment in the header file does not match the
implementation in the FSP and hence setting PrimaryVideoAdaptor to
'GPU_PRIMARY_IGD' will be treated as if the selection was
'GPU_PRIMARY_PCI'. This in turn leads to Linux gfx driver issues for
earlier driver implementations.
This commit corrects the enum values for the FSP parameter to match the
implementation.
TEST=Boot into Linux on mc_apl1 and verify that graphics works.
Change-Id: Iedbc144fa809f6d4587f5223b235ee95579c48f7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch fixes a problem where the `is_cse_devfn_visible` function is
unable to show the CSE device slot and function number properly.
BUG=b:211954778
TEST=Able to display CSE device slot and function number properly as
below:
Before:
[DEBUG] PCI: 00:16.0 final
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
With this code changes:
[DEBUG] PCI: 00:16.0 final
[WARN ] HECI: CSE device 16.1 is disabled
[WARN ] HECI: CSE device 16.2 is disabled
[WARN ] HECI: CSE device 16.3 is disabled
[WARN ] HECI: CSE device 16.4 is disabled
[WARN ] HECI: CSE device 16.5 is disabled
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I76a634c64af26fc0ac24e2c0bb3a8f397a65d77b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch fixes a problem where `cse_final` only calls into 1 function
from available `notify_func` lists.
BUG=b:211954778
TEST=Able to execute `cse_final_end_of_firmware` function as part of
`cse_final` call.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I04d8c9c1213ddeb9ed85473e62fcca298c0d5172
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The workaround causes the eMMC controller to not enter its L1
during the boot process
BUG=b:220079865
TEST=Build FW and run stress exceed 2500 cycles.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I2a5888e943c1ebf83a54f9b172f986f8b13d9b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch adds support in the CSE Sub partition update procedure
to use GET_BOOT_PARTITION_INFO HECI command output to create the
region device for CSE RO and CSE RW. The GET_BOOT_PARTITION_INFO
HECI command provides CSE's RO and RW boot partition information.
Existing code relies on FMD file to get the CSE's boot partition's
(CSE RO and CSE RW) start and size details. This change make
independent of FMD file declaration with respect to CSE RO and CSE RW.
TEST=Build and verify the CSE RO and CSE RW region device information
through code instrumentation. Also, did boot test on Kano system.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ie9a83b77ab44ea6ffe5bb20673e109a89a148629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
I don't really get around to review super I/O or superiotool patches any
more, so lower the maintenance level of those. If anyone else wants to
step up as new maintainer for those two, feel free to do so.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id7bd3c68c1adc0db82dab078291918742b453d4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Change-Id: I910998a5555319cf9840493a31df4934054e08ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Expose configuration of Intel PAVP (Protected Audio-Video Path, a
digital rights protection/management (DRM) technology for
multimedia content) to Kconfig.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I5a364a9781642eb366e5e502a4ee69008c19bcd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The FSP needs to program VrPowerDeliverDesign configuration per
platform according to the platform capabilities to avoid incorrect
electrial/power parameters. This value is an enum of the available
power delivery segments that are defined in the Platform Design
Guide.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I74859e6735e59a15084a9e690b43f68341862833
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
consumption
To achieve low power consumption, we disable unused PCIe and SATA
pins at beadrix/overridetree.cb according to baseboard/devicetree.cb
and mainboard schematic. Original measured beadrix board's power
consumption is about 250 mW. After we disable unused PCIe and SATA
pins, as well as, enable the other low power MUX CL (3487086: USB
MUX: Update low power mode of MUX anx7447 used as MUX only |
https://chromium-review.googlesource.com/c/chromiumos/platform/ec/
+/3487086), the measured power consumption achieves about 110 ~ 116
mW, as well as, meets Google battery life for 14 days in the suspend
state and Intel low power consumption about 116 mW.
BRANCH=dedede
BUG=b:204882915
TEST=on beadrix, measured power consumption meets Intel power
consumption.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I79ec524c5ce8f2a79da4aeba084786fb9dac17af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62776
Reviewed-by: Teddy Shih <teddyshihau@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable MKBP (Matrix Keyboard Protocol) interface for all guybrush family
to use for buttons and switches. Disable TBMC (Tablet Mode Switch
device), as it is not needed anymore.
BUG=b:227240985
BRANCH=guybrush
TEST=manual test on Dewatt:
Volume Up/Down and Power buttons, Tablet Mode switch
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ic9980f2b5bf10b12f2bd666212b5bce925dc323d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63394
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel common SoC code uses SoC-specific soc_acpi_name function to
generate ACPI tables, add this to Denverton
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: I5f50733656ca7724caf8a6570bcb21f7b761c3ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
|
|
Add device function macros for Denverton similar to other SoCs
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: I75daaf4907515f80a10c003eb473bbe557a42acc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
|
|
To save the power consumption, we disable the unused power of
optional components in coreboot.
BUG=none
TEST=the value of power consumption is as expected.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic0c7c2d1b6a4c26980a3029b60051ab1406406ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Follow-up commits move this to a common place.
Change-Id: I26a37f9384a581a8a750efccc2100a5c6a6f0f85
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There are currently two issues related to the WLAN power sequencing on
nereid:
- If the EN pin GPP_B11 is not high during cold boot, the SoC gets stuck
in S3.
- During warm reboot, if we only assert RST without pulling the power
low, then the kernel crashes.
As a workaround while we investigate these issues, we pull the EN high
in S5, then actively drive it low in bootblock and high in romstage to
make sure it goes low during warm reboot.
BUG=b:227694137, b:225261075
TEST=Cold boot succeeds, and there's no kernel crash during warm reboot.
Change-Id: I1ca46d9649eff3f96a0e77db594d87288b29a83a
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
BUG=None
TEST=evtest works:
Select the device event number [0-14]: 9
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "PRP0001:00"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 15 (SW_PEN_INSERTED) state 1
Properties:
Testing ... (interrupt to exit)
Event: time 1649153020.275201, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0
Event: time 1649153020.275201, -------------- SYN_REPORT ------------
Event: time 1649153025.848689, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Event: time 1649153025.848689, -------------- SYN_REPORT ------------
Event: time 1649153028.383195, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0
Event: time 1649153028.383195, -------------- SYN_REPORT ------------
Event: time 1649153080.869155, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Event: time 1649153080.869155, -------------- SYN_REPORT ------------
Change-Id: I0d5134737fc758a43e1fff95e9f2a20200991bb1
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Some bytes in the descriptor need to be set differently for Type-C and
HDMI. To allow using a single firmware variant for both cases, update
the descriptor at runtime based on fw_config. This is a temporary
workaround while we find a better solution.
The byte values were determined by changing the following CSE strap and
comparing the generated descriptors:
Type-C: TypeCPort2Config = "No Thunderbolt"
HDMI: TypeCPort2Config = "DP Fixed Connection"
The default value before updating the descriptor is Type-C, but this was
chosen arbitrarily.
BUG=b:226848617
TEST=Type-C and HDMI both work on nereid with fw_config set correctly.
Change-Id: I2cc230e3bd35816c81989ae7e01df5d2c152062e
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
On nereid, we need to update the descriptor based on fw_config (see
the follow-up patch), so add support to update the descriptor at
runtime. This is a temporary workaround while we find a better solution.
This is basically adding back the configure_pmc_descriptor() function
removed in CB:63339, just making it generic and allowing it to update
multiple bytes at once.
BUG=b:226848617
TEST=With the following patch, Type-C and HDMI work on nereid.
Change-Id: I43c4d2888706561e42ff6b8ce0377eedbc38dbfe
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
The patch removes Kconfig CONFIG_ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTOR
code which updates PMC descriptor for an intermediate ADL-P SoC
stepping A0. Since intermediate ADL-P SoC is no longer supported and no
board is selecting the Kconfig, so remove the code that updates PMC
descriptor.
TEST=Build and boot Gimble board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I2a629353a4194a7505655346dcab4ef53059e0b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63339
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The symbol watchdog_tombstone is not really about ChromeOS
but ELOG instead. This prepares for furher move of the
watchdog_tombstone implementation.
Change-Id: I8446fa1a395b2d17912a23b87b83277c80828874
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
FLASH is often used when accessing FMAP base and size from
fmap_config.h so it's handy to be consistent with all other boards.
Change-Id: Ibba938c72d42ac74dcea8e8e6478ddae510d8c03
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Setting the clock source depends on clock request pin for WLAN/SD/SSD
device. Also turn off the unused (CLKREQ#3) clock sources.In skyrim,
clock source 0/1/2 are routed for WLAN/SD/SSD device.
BUG=b:227297986
BRANCH=none
TEST=Build
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I21fb912b69f59717eb4e84c379f706a0257a9ed1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The only purpose of mainboard_chromeos_acpi_generate()
was to pass cros_gpio array for ACPI \\OIPG package
generation.
Promote variant_cros_gpio() from baseboards to ChromeOS
declaration.
Change-Id: I5c2ac1dcea35f1f00dea401528404bc6ca0ab53c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch SOC_INTEL_COMMON_BASECODE Kconfig for Comet Lake, Jasper Lake
and Tiger Lake SoCs. It allows access to intelbasecode/debug_feature.h
for Comet Lake, Jasper Lake and Tiger Lake SoCs.
TEST=Build code for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ie55ded673c8fa0edf2ca6789b15771bd2e56c95e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch enables dynamic debug capability for Brya family of boards.
BRANCH=MAIN
BUG=b:153410586
TEST= Verified the CSE firmware update functionality on Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I51b0e0bb4392d3fbdb50577d3644491ab90a33c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
The patch enables dynamic debug capability driver for Alder Lake
platform.
BUG=b:153410586
TEST= Build code for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ic4df3d7f3d6585bd37c632b1a3f0a47c94b63697
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The patch adds a framework to control coreboot and Intel SoC features
dynamically. BIOS reads control information from OEM Section in the
Descriptor Region and control the developer selected features.
With the feature, debug team can control the selected SoC and coreboot
features without rebuilding coreboot.
In order to enable the feature, SOC_INTEL_COMMON_BLOCK_DEBUG_FEATURE has
to be selcted from mainboard.
The OEM section starts from offset:0xf00 till end of the Descriptor
Region(0xfff).
BUG=b:153410586
BRANCH=None
TEST=Verified CSE firmware update functionality on brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I5ba40926bd9ad909654f152e48cdd648b28afd62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Add support for dumping ITE IT8625E Environmental Controller registers.
Values as per "IT8625E Preliminary Specification V0.3 (For D Version)".
Change-Id: I68aad90097206c6b8ef40075530c00809d9511e2
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add EC memory layout and Q events for AMD Cezanne based boards, "Byte"
and "Fighter", which both use the ITE 5570E.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3f837263d24e6b642cf33fd2995d8c90529706f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62994
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieea1c8d0923f6ea6b13cf76525c9c4c686a92c40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove the subsystem device ID for HDA devices, so that the correct
Intel [8086:xxxx] is used. This was an old workaround for Windows
that is no longer required with a new driver.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I50c03a2df06af3ef1939afd0739e083a9056557f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch provides the set value for intel speed step in devicetree
for FSPS. Before that in case of not set value in device tree the
default value of disabled was overwritten by default enabled of FSP.
Test: mainboard/siemens/mc_ehl/variants/mc_ehl1
Check status of Bit 16 in MSR 0x1a0 after boot.
Change-Id: I0a5ef4968a27978116c21ce35b3818c6b36e086f
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The hob finding functions are never looped over so there is no point
for the 'next' inside their name.
Change-Id: I18e452d313612ba14edda479d43f2797f6c84034
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Meteor Lake has the IOE Die for TCSS. This change adds IOE SBI access
for TCSS pad configuration and Thunderbolt authentication.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Change-Id: I324242a018fb47207dd426fc8acd103f677d5cab
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change abstracts the common TCSS functions for pad configuration
and Thunderbolt authentication.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Change-Id: I3302aabfb5f540c41da6359f11376b4202c6310b
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This field was never meant to be filled out by coreboot, because it
can't know what the right value for this will be by the time the OS
is running, so anything coreboot could fill in here is premature.
This field is only read by the chromeos-specific `crossystem` utility,
not by kernel code, so if one does not run through depthcharge there'll
be many more broken assumptions in CNVS anyway.
Change-Id: Ia56b3a3fc82f1b8247a6ee512fe960e9d3d87585
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Motivation is to have mainboard_chromeos_acpi_generate()
do nothing else than fill ACPI \OIPG package.
Change-Id: I3cb95268424dc27f8c1e26b3d34eff1a7b8eab7f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
