| Age | Commit message (Collapse) | Author |
|---|
|
Based on contents from coreboot wiki[1], this patch adds much needed
documentation for the very important abuild utility.
On top of what was there:
- Mainboard targets have been updated
- Added example for building one variant of one board
- Added example for building boards selectively and/or with custom
configurations using --skip_set/--skip_unset, -K, and config files
[1] https://www.coreboot.org/Abuild
Change-Id: I69701eaeef616828bc30736aba2f617e844a3148
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The data fabric also controls which PCI bus numbers get decoded to the
PCI root. In order for the resource allocator to know how the hardware
is configured, read the corresponding data fabric registers to get the
information that then gets passed to the allocator.
Picasso, Cezanne, Mendocino and Rembrandt only support one PCI segment
with 256 buses while the Phoenix and Glinda data fabric hardware has
support for more PCI segments. Due to this change, the register layout
is different and incompatible between those two, so introduce the
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_MULTI_PCI_SEGMENT Kconfig option for a
SoC to specify which implementation is needed. At the moment, coreboot
doesn't have support for multiple PCI segments and the code doesn't
support PCI segments other than segment 0.
On Picasso the PCI bus number limit read back from the data fabric
register is 255 even though CONFIG_ECAM_MMCONF_BUS_NUMBER is set to 64,
so also make sure that the bus and limit returned by
data_fabric_get_pci_bus_numbers is within the expected limits.
TEST=PCI bus allocation still works on Mandolin (Picasso) and Birman
(Phoenix). Picasso has 64 PCI buses. coreboot puts this info into the
resource producer in _SB\PCI0\_CRS which the Linux kernel reads:
* coreboot: PCI0 _CRS: adding busses [0-3f]
* Linux: pci_bus 0000:00: root bus resource [bus 00-3f]
This matches the information in the ACPI MCFG table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide5fa9b3e95cfd59232048910cc8feacb6dbdb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77080
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The fixed I/O resource descriptor macro implies that the device will
only decode 10 of the 16 IO port bits causing aliasing. Use an I/O port
descriptor instead and use Decode16 to tell the OS that this I/O
resource will decode all I/O address bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2df260cea6f12f5a3a6cbae3c7b99bab244a556b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The fixed I/O resource descriptor macro implies that the device will
only decode 10 of the 16 IO port bits causing aliasing. Use an I/O port
descriptor instead and use Decode16 to tell the OS that this I/O
resource will decode all I/O address bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6183d625fb7968fb33caf396f19feef8917ba4fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The SOC_AMD_REMBRANDT_BASE comment at the end of Glinda's Kconfig is
probably a leftover from the Mendocino/Rembrandt SoC this file was
copied from. Change it to SOC_AMD_GLINDA to match the corresponding
'if SOC_AMD_GLINDA' in the file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85132e4840c1bc713cfc2f3493f800d66edd10ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_vs`:
* Windows 11
* Ubuntu 22.04
* Manjaro 22
No known issues.
https://starlabs.systems/pages/starbook-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7c92bf92ab4de546c3633fae7e19a302409508ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Neither Windows nor mainline Linux make use of IOSF on the Braswell
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/edgar
Change-Id: Ic51624ffd816d48c007c13d510601cf8cbf1edc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Neither Windows nor mainline Linux make use of IOSF on the Baytrail
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/swanky
Change-Id: I249028c57cc704955cf5a11e2088780ef58e16cf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77141
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Neither Windows nor mainline Linux make use of DPTF on the Baytrail
platform, so guard its inclusion with CONFIG(CHROMEOS) to prevent an
unknown device being listed in Windows device manager.
TEST=build/boot Win11, Linux 6.2 on google/swanky
Change-Id: Ifc4d349691b647fe2d70c92bd20d1b1128b1e10a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77140
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I83574032ef506a411571e8363f476f322ac13e5e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76686
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VBOOT_CBFS_INTEGRATION needs board_reset in its logic. Otherwise, it
will cause a build failure.
BUG=b:294643742
TEST=build coreboot
Change-Id: Ia4b81d8add71e62707f6b5a747d270caba502174
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77118
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
After enabling VBOOT_CBFS_INTEGRATION, bootblock exceeds allocated size
(60K) by 3.5K. Since TPM and EC won't be accessed in bootblock, we move
I2C and SPI initializaion to verstage to reduce bootblock size. The GSC
interrupt pin configuration is also moved to verstage to save more
spaces for bootblock.
The size of bootblock.raw.bin is reduced from 64,040 bytes to 60,808
bytes.
BUG=b:294643742
TEST=boot to kernel
Change-Id: I5f6855d5a1a0fce6e739d44652c88e406f6f7b89
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Set the ACPI device status to hidden, since no driver is necessary or
available under Windows.
Linux is unaffected as it does not use the ACPI device status.
TEST=build/boot Win11 on google/akemi
Change-Id: Ib1e274084400fa47e483267d331e632ceb5be757
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75178
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the variable `mirror_flag_attempts` isn't accessible, or doesn't
have a value, don't attempt to mirror the EC.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia39b2ce4ffcb8db3a335449c8bdb0d5c8a28a52c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The EC should be mirrored (if it's out of date) unconditionally if
the board support Thunderbolt. Use DRIVERS_INTEL_USB4_RETIMER instead
of SOC_INTEL_COMMON_BLOCK_TCSS as it's more suitable.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I27b238d4d404746c9a70bacf8e60d9e0b0e1ccca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76579
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This variant was inadvertently missed when upstreaming other rambi
variants, so add it here for completeness. Add ACPI for the light
sensor to common code to match all other i2c devices.
Sourced from downstream Google branch firmware-expresso-5216.223.B,
commit 6f4073c0e8c8 ("baytrail: implement baytrail technical advisory
556192").
Change-Id: Ia507f95f6af85344e1ab8452f7b3c2cc61526699
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Set the maximum subordinate bus number of the domain to the last PCI bus
number that is decoded to this PCI root. This makes sure that the
resource allocator knows the maximum number of PCI buses on this PCI
root to not assign bus numbers to buses below this PCI root that aren't
routed to that PCI root.
Now that we have this info in the link list structure or the domain
device, we can pass the max_subordinate field to the
acpigen_resource_producer_bus_number call and can leave the subordinate
number after pci_domain_scan_bus is done unchanged instead of setting it
to the limit.
TEST=On Mandolin both the bus resource producer in _SB\PCI0\_CRS and the
PCI bus number allocation remain unchanged.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2ee75b2a7054a306b0c7d98c5357391c029187bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77112
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icafa36ae2e07068c276600067bba1d0377f0824b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74258
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the ability to show a pre-boot splash screen on
Meteor Lake systems using FSP-S.
The patch calls into `fsp_convert_bmp_to_gop_blt()` when the
`BMP_LOGO` config is enabled. This function converts a BMP
file to a BLT buffer, which is then used by FSP-S to render the splash
screen.
Additionally, increase the heap size (malloc'able size) upto 512KB
(when BMP_LOGO config is enabled) to accommodate high
resolution logo file.
BUG=b:284799726
TEST=Able to see pre-boot splash screen while booting google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3608bfacc21574e12cde0e2012a16e6388ce54df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds an API to convert BMP images into GOP BLT buffers for
Intel FSP-S. This is required to display the OEM splash screen at
pre-boot phase.
Previously, Intel FSP-S had provision to consume the *.BMP file as is.
However, starting with the Alder Lake platform, Intel FSP has dropped
this conversion logic and expects the boot firmware to pass the BLT
buffer directly.
This patch implements the conversion logic in coreboot.
BUG=b:284799726
TEST=Able to build and boot google/rex
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I992b45d65374f09498ff0cab497f7091e1e7a350
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds BMP image header and BLT header macros in
`efi_datatype.h` to implement a converter inside coreboot FSP 2.0
driver that converts any input *.BMP image into the BLT buffer.
The output BLT buffer is used by FSP-S to render any pre-boot display.
Added `Bmp.h` and `GraphicsOutput.h` files for `UDK base >= 2017`,
as these files were added with the UDK version 2017.
Note: BLT in UEFI BMP implementation stands for `Bit-block transfer`.
It is a method of copying graphis data (specifically images and fonts)
from one location to another (framebuffer), where the data is stored
in blocks of bits.
BUG=b:284799726
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4e282d135007d288aadb5996a662524f76428874
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I7a775838358e7abe3f03d0ae65fb619c15dbad6f
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76875
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel requires that all enabled PCIe PCH ports have a CLK_REQ signal
connected. The CLK_REQ is used to wake the silicon when link entered
L1 link-state. L1 link-state is also entered on PCI-PM D3, even with
ASPM L1 disabled. When no CLK_REQ signal is used, for example when
it's using a free running clock the silicon will never wake from L1
link state. This will trigger a MCE.
Starting with FSP MR4 the UPD 'PchPcieClockGating' allows to work
around this issue by disabling ClockGating. Disabling ClockGating
should be avoided as the silicon draws more power when it is idle.
TEST: Verified on two boards, one with missing CLK_REQ on a PCH
root port, that the code does the right decision to disable
UPD PchPcieClockGating and PchPciePowerGating when necessary.
Change-Id: I673bbdbadc9afbed6a7bd5ce9f35dc70716d875b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It makes no sense to expose these symbols to the user in the menu.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6eb78d12afdc0828bf5e2d305f033d2f0cf4622a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
Update eMMC DLL settings to solve eMMC boot error.
BUG=b:294196963
TEST=Reboot test 1000 times pass
Change-Id: I16f3aa6aab4c58369770acad92c7ee5518c719ab
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77082
Reviewed-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I435557f636a227e2d8c6c413a4d928e58a471dec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77111
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rembrandt has different data fabric component IDs compared to Mendocino.
PPR #56558 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c840a3e071a289d9e02143ee790c26faeda029d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Split the signed AMDFW binaries into their own section and enable PSP
verstage.
BUG=b:284984667
TEST=Build Myst BIOS image with PSP Verstage. Boot to OS successfully
with PSP verstage and a separate section for signed AMDFW binaries.
Change-Id: Ie0a54c157ebdebf9a0c95933c96865e0782a0f90
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
With reference to the Picasso PPR 55570 Rev 3.18, LegacyIoEn bit is 0 on
reset and setting it will enable the decoding of the following legacy IO
ports:
0x20, 0x21, 0xA0, 0xA1 (PIC);
0x40, 0x41, 0x42, 0x43, 0x61 (8254 timer);
0x70, 0x71, 0x72, 0x73 (RTC);
0x92.
Verstage does not use those legacy IO ports. Also newer SoCs like
Phoenix do not support Legacy I/O registers to access Power Management
registers and accessing them from PSP verstage causes a hang. Hence
enable legacy IO only on platforms that support it.
BUG=b::284984667
TEST=Build Myst BIOS image with PSP Verstage. Boot to OS successfully
with PSP verstage.
Change-Id: I5e74b4cd1fa7e942770976e5e2197ded47503660
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76692
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I20fe63e93121b3b791e6d475e948b6ada648293b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77073
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Neither cap, hcdn_reg, disable_relaxed_ordering nor ht_link_up are used,
so drop the fields from struct bus.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I655b028107da7ddcb5caa03dab55b022387e7cb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77072
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add the required files to support VBOOT for when it is enabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I842b79d8e144414ce42b3d0d9dfd2b5180ecf70d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74230
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust the Type-C output ports to "Integrated Displayport" to comply
with FSP 4221.
Change-Id: Ifcb4a086106f90c70926f44a7566330efd185544
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Disable PSR in the VBT to avoid flickering on kernels later than 5.15.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3640fcea73e278e6c8968a4b0c9ba7cf04a2361f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Disable PSR in the VBT to avoid flickering on kernels later than 5.15.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5b58f4d26fa0032a5aed3af0db71a5daf41fdd8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76941
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable "CnviBtCore" and "CnviBtAudioOffload" to increase
bluetooth performance.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibafabfaa39ba46620a2e06b288c457267f041ab0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I8dc97ca0fb310417a28e253f378511f510c3b4b3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77124
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I88831f56a259d45e3ae1f66abd1d7aaeac4ede20
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
If the version of the EC firmware in coreboot doesn't match
the firmware that the EC is running, print the versions.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I55c09b8d5ffe8ca9135384c823d005b55cfd83d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76380
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch the TGL variant to use the "merlin" EC variant, and delete the
no longer needed "TGL" EC variant.
This is not a functional change.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id4d305490b48c1c79ea52b0bbaa79b675412e0b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76332
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch the ADL variant to use the "merlin" EC variant, and delete the
no longer needed "ADL" EC variant.
This is not a functional change.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I61e56cc95a26be60d7f10c89d26bce2d857ae81a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The UCSI mailbox isn't used, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I03587a2322b1f34fa26a5c2ba7906a4e1ae82ae0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Merlin was the name for the open-source variant of the EC. It
ended up getting entirely rewritten to work with SDCC, and is
currently being used on starbook/adl. The source code isn't
available at the time of this commit due to some old ITE XLT
code being used.
Add the latest version of the code, replacing the old code, so
the boards can be migrated over.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib8384fc9322058297e8219ac8e483ac37a70bd33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Recent ChromeOS devices use Ti50 instead of Cr50. Therefore, some
strings or comments are not accurate anymore. When applicable, rename
Cr50 to GSC (Google security chip).
BUG=b:275544927
TEST=./util/abuild/abuild -x -t GOOGLE_TOMATO -a
BRANCH=none
Cq-Depend: chromium:4756700
Change-Id: Ie5b9267191a5588830ed99a8382ba1a01933028f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Updating from commit id 034907b2:
2023-06-03 08:10:11 +0000 - (vboot_reference: eliminate redundant call to write protect EC-RO)
to commit id 0c11187c:
2023-08-07 11:41:45 +0000 - (vboot_reference: Rename Cr50 to GSC when applicable)
This brings in 38 new commits:
0c11187c vboot_reference: Rename Cr50 to GSC when applicable
76c160e2 futility: updater: Support --unlock_me with --mode=output
48a12071 futility: Add `show` test for CBFS integration firmware
b419912f futility: Pull file names into ft_show_bios() subtypes
db56d9c5 futility: Clarify `name` and remove `data` argument of file type funcs
311f59e8 futility: Use -P for signing tests
854c71b9 tests: futility: Make test_show_contents easier to update
5f5a695e futility: Document machine parseable format guidelines
774c700f futility: Fix HWID digest footer output
8cc8b710 futility: Fix build with a single RW partition and CBFS verification
6d4b03e5 futility/cmd_read.c: Implement --split-path|-s switch
636d5b16 Correct a malloc() check in VbExStreamOpen()
def2f5af firmware/2lib: Switch to RO immediately if only one slot present
9c9931b4 futility/cmd_read.c: Optimise to limit SPI transaction
cb56129f checkpatch: Change max line length from 80 to 96
aa23241a tests: Fix run_vbutil_kernel_arg_tests.sh
d7c26f52 futility: Follow-up fixes to CL:4548417
56490778 futility: add machine friendly print option
23e750b8 tests: Remove duplicate test for vb2api_fail()
612d140b futility: updater: fix custom label devices using customization_id
69cbe7ee Revert "futility: Avoid unnecessary servo control command"
290b72d6 vbutil_kernel: Drop alignment check for EFI stub
5d582eb5 sign_android_image.sh: Preserve capabilities for EROFS as well
8c30aaab futility: Avoid unnecessary servo control command
58f8bb5c futility: Fix flash teardown issue
2d9f9cdb sign_official_build: add cloud-signing param
d0ceeee6 image_signing: sign_official_build: create a proper main() func
38cfb9b0 Revert "make_dev_ssd.sh: Add support for kdump"
2c43e4dd .clang-format: Change the ColumnLimit from 80 to 96
3107ce77 host/lib/flashrom_drv.c: Check chip len symmetrically across R/W ops
0549e3c1 2load_kernel: Change bootloader_address out-parameter to offset
979f61de Make sign_android_image.sh support EROFS image format as well.
bb5ccd7d lib/flashrom_drv.c: Pass regions as pointer + size.
249a3477 vbutil_kernel: Move kernel's EFI boot stub into bootloader section
c8998d5f host/lib: Use absolute path for flashrom
564d9274 futility/updater_utils.c: Drop flashrom cli producer
9bf3edf8 futility/updater.c: Clarify conditions of do_update
212643bd futility/updater.c: Use canonical defines
Change-Id: I0947f0f6670328b779d2a8ef240ca196ef615cec
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
The command "git branch -a | grep -q ${branch}" may not exit with 0 when
pipefail is set. "grep -q" exits immediately with exit code 0 as soon as
a match is found. However, at that point "git branch -a" may be still
writing to the pipe, leading to SIGPIPE. When pipefail is set,
PIPESTATUS 141 will be returned. Fix the problem by not using "grep -q".
Also fix the branch name in the generated commit subject.
Change-Id: Ic07efb5e2a4f3b7bbc6e76da9e026771bc685bdb
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77085
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Width of registers are always dwords on pl011, not bytes.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I955319d31bba5c0cd4d50f2b34111d51fea653ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The use of a separate _PRW is not necessary when the _CRS interrupt
already has the Wake flag set (as these all do). Additionally, Windows
does not allow the use of a gpioint for the _PRW source, which results
in an ACPI_BIOS_ERROR BSOD.
Since ChromeOS builds for CYAN devices use an older kernel and may not
make use of _CRS interrupt Wake flag, keep the _PRW around when
CONFIG_CHROMEOS is selected.
TEST=build/boot Win11 on google/{cyan,edgar}
Change-Id: I7d0883e4de9572a14c8bad0ac086370bd00eeb1a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76798
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Specify the size of the ME region so that it matches the IFD.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I51ba0a7646ab72d4dd22b99519708649c78b25b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5dac42fb2239e7bc14dbe45442cc562927973b24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch creates a new variant karis4es.
The new variant will support only ESx samples. The existing karis
variant will support the QS samples.
BUG=b:293326312
TEST=Image built properly
Change-Id: I854fee7206528a235f027ff8ec98593a02be4806
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76761
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Add configs for USB 3.1 Gen2 electrical validation (EV) settings
so that people can set the EV settings per board in device tree.
BUG=b:285811345
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to taranza and checked the log.
All usb configs were set correctly.
Change-Id: Iecd12d3db76b63ad99887dee5991d94d47f138fd
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76246
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This is unused - other references were removed long ago.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia7a65f54c736db20a5440795fdfaa8be31ef971f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I8fa26e7a398eee855c31a76f0f89b4111368c2a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
´config´ is removed from measure list (CB:74750)
Add 'config' to ram_stage_additional_list[] to have it measured and
verified.
BUG=NA
TEST=boot and verify coreboot logs on facebook FBG1701
Change-Id: Id4119bc3a01e11f14a091facf81964d1a71092c1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The change does the following:
- adds PCH IDs for 700 series chipsets per the DOC# 619362 rev 2.2
- updates GPIO table for PCH-S per the DOC# 618659 rev 2.1
- enables dumping GPIOs for 700 series PCH
Change-Id: I4509ad714772ce90cdee5135227c02640acb6085
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
IT8784E is basically a IT8786E stripped from serial ports 3-6.
There are very few minor register differences in EC IO space and GPIO
LDN, which are covered by this patch.
Based on IT8784E-I Preliminary Specification V0.7.1 (non-public).
TEST=Dump SIO configuration on Protectli VP4670 (vault_cml).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5de8aeaff9697b854281391083f77a1083d12fe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ie360ca3640a4774e3baec36468a69f76fcd1217b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use C99 flexible arrays instead of deprecated fake flexible arrays.
This reduce difference with upstream.
Change-Id: I24016493280e22f34ae5cce49fe7c1f520270f9a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduce the difference with linux v6.5-rc4.
Change-Id: I64bbc09b531ea217514601386dd517af92aa40f1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70200
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reduce the difference with linux v6.5-rc4. and check for
const static or static <non ptr type> const declarations.
Change-Id: Ib4b37e130f2edbfe0385f0707a8c910a244bcfc7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduces the difference with linux v6.5-rc4.
Change-Id: I9f0e9f12a177c32b401fda74cbb30c5c259b3744
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduces the difference with linux v6.5-rc4.
Change-Id: I59d9619f2e58f24e0a5474bcfa79351e3afb933d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduce the difference with linux v6.5-rc4.
Change-Id: I63b3561471d3bd0ebfe7e5733c6dd6fb673904e0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65829
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie54fd6c5a82f368018d0b5fb811a6c9220c2c70b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77079
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PPRs #57019 Rev 3.05 and #57396 Rev 3.06 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0fe478a710ecc1f2c8b36347aaf2d1634ebba9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77078
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PPRs #57243 Rev 3.02 and #56558 Rev 3.04 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibabe8faa79e3dcd02f4c885d29b9634645947b98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77077
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfac7d996c6de9ea7c6adf2760de0ad97ffb9ec0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
PPR #55570 Rev 3.18 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide492f4479b85cd885044bbf74d8bf18c12e552b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
device/device.h provides struct device.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie03f6d15d94f2858e293b9f57505034263c03bbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77074
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Prior to commit d1c0f958d198 ("acpi: Call acpi_fill_ssdt() only for
enabled devices"), uart_inject_ssdt() was used to set the ACPI status
(_STA) for both enabled and disabled devices. The aforementioned commit
limited it to being called only on enabled devices, which left disabled
devices without any _STA method at all -- which the OS assumes means
that the device is present and enabled.
To fix this, create the _STA method in the UART asl code for each port,
and set the return value to a name variable (STAT) which defaults to
0 (not present/disabled). Then, have uart_inject_ssdt() set STAT to
present and enabled (0xF) for UARTs actually present on the board.
TEST=build/boot google/skyrim (frostflow), dump ACPI tables, and verify
that _STA returns 0xF only for UARTs enabled in devicetree.
Change-Id: Id89e74c3ea7f53280935898ee35311b7cf3b152a
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77092
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kahlee selects AMD_SOC_CONSOLE_UART causing UART0 to be used as console,
so enable uart_0 in the devicetree to make sure that the UART will be
marked as enabled in the SSDT that will be generated with the next patch
applied. This also matches the other AMD SoC based Chromebooks.
Change-Id: Ibe18f87d8bf63603fb2eb87728395e45e9a9ef69
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77094
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define the UARTs as MMIO devices in the chipset devicetrees. Drop ACPI
_STA in asl since now handled by common SSDT generator. Implement
wait_for_aoac_enabled() since required by SoC common code, and ensure
compiled during all stages necessary.
TEST=build/boot google/liara, verify console UART still functional.
Change-Id: Ibecafdfa189d9c63a29b63759c5b965d03719009
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77093
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 5dfec718290609dc0fd0331070ad703107e0b7e7.
Reason for revert: This change made it impossible to disable ASPM by
FSP parameter. ASPM_DISABLE would result in the FSP parameter not
being programmed, causing it to be the FSP default value instead.
This additionally fixes MTL to match ADL.
Change-Id: I60c0ea08513fcb0035449ea3fef1681de528c545
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75280
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I56ee0d4a26931fe05d2d35046325901930086e35
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76344
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TESTED=On Intel AC, after seleting DISPLAY_UPD_IIO_DATA to compare
IIO UPD data are expected. lspci -vvv result is also normal.
Change-Id: Icfc2a22cb2e1f95be6bfc1d712e620e19a23ce27
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
To deduplicate mainboard mainboard_config_iio since there are a few
SPR-SP mainboards now.
The flow would be soc function initialize_iio_upd initializes the table
with the default values which are mostly zero, then mainboard can
overwrite it by soc_config_iio.
Change-Id: I72d74241fcad4c85a95f6d14587418f544caadd9
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76185
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Generate RAM ID for CXMT CXDB4ABAM-ML
DRAM Part Name ID to assign
CXDB4ABAM-ML 1 (0001)
BUG=b:290154780
BRANCH=dedede
TEST=FW_NAME=boxy emerge-dedede coreboot chromeos-bootimage
Change-Id: Ide44acf6bb8e5d5023c76d9e5e48ef113f7c6ec6
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76825
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Generate initial SPD for CXMT CXDB4ABAM-ML
BUG=b:290154780
TEST=util/spd_tools/bin/spd_gen spd/lp4x/memory_parts.json lp4x
Change-Id: I0de6b128f05abf2fbd4b785818268b69338ed45a
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This has two noticeable effects:
1. Devices populate the list much quicker while scanning.
2. Devices do not disappear and reappear from the list while scanning.
Tested on system76/lemp10.
Change-Id: I598c53805785914b4e9ae7f620e724eadbe643d4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Daniel Sutton <daniel@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77047
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
NVM has 8KB to store camera module related settings and
parameters. According to NVM hardware spec, the NVM size should be
0x400 and the width size should be 0x08.
Re-set the right NVM format and ensure camera related configs can
get the correct module information.
BUG=b:294155898
TEST=none
Change-Id: I58932bc0f3dd935aa0ea8e68b2a4b0ae4907b316
Signed-off-by: Serin Yeh <serin.yeh@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76893
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
TEST=build/boot Windows/linux on redrix?, verify touchscreen functional
in OS, dump ACPI and verify only i2c devices actually present on the
board have entries in the SSDT.
Change-Id: I0273014b2d164f67f503da7b968a09256bffb43c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74929
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For brya variants with a touchscreen, drive the enable GPIO high
starting in romstage while holding in reset, then disable the reset
GPIO in ramstage (done in the baseboard). This will allow coreboot
to detect the presence of i2c touchscreens during ACPI SSDT generation
(implemented in a subsequent commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I8e56ac4834ce69de18bef2d34f5c361a7fda1aab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Ia906a115538964628958bb4b6e3de3aa71577cce
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76252
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=APU2 still boots and doesn't show any new errors in dmesg.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia9f0eb3df8fd2dfe395f616da981cc3a0cd3b29d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Before add_io_regions only reported one fixed IO range to the resource
allocator that covered the whole IO range from 0x0000 to 0xffff. Instead
read the data fabric IO space decode base and limit address register
pairs to get the actual IO port decoding from the data fabric registers.
This will also help with adding support for multiple PCI root domains to
the common data fabric domain code so that Genoa can use it. In that
case each PCI root domain will only decode a part of the whole IO port
range.
Beware that the data fabric IO base and limit fields can contain values
that correspond to IO port addresses far outside of the addressable IO
port range. In case of Picasso, the IO limit read from the only enabled
DF IO range register would be 0x1ffffff after converting the raw data to
an IO port address. To not give the resource allocator wrong constraints
make sure that the IO limit we report will be at maximum 0xffff.
TEST=On Mandolin (Picasso) and Birman (Phoenix) the full range of IO
port addresses still gets reported as a domain IO resource producer like
before the patch:
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I087d96f7bdaae0d7b53089f6abaf0500a4b064e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia58e26caa1ba910b41911991b176a1ac8c4e0065
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
PPRs #57019 Rev 3.05 and #57396 Rev 3.06 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I769dc317115981391cf0f4e0b743c600407a6eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76958
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PPRs #57243 Rev 3.02 and #56558 Rev 3.04 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic68e73e28362abc5d812839b40282114c7ba25ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifcae9c9ad664d50100cd40692fd9631845f76671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
PPR #55570 Rev 3.18 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I61d4fca48d71010bbc4bd94a2fb8889bad08f1cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Rename add_io_regions to add_data_fabric_io_regions to be consistent
with add_data_fabric_mmio_regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia990cc14dd6dc162ad614a6e9e0b36426cb04670
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
As a preparation to read the IO decode ranges from the data fabric
registers instead of having it hard-coded, factor out the
report_data_fabric_io function to report one IO producer region from
add_io_regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c3f8cd6749623f1a4bad14873d53b8a52be737
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76933
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the fabric_id struct field in the df_mmio_control union to
dst_fabric_id to both better match the register definitions and also be
a bit clearer about what this is doing. Also use tabs for indentation in
the struct inside the df_mmio_control union.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0a17d82a5d7b66a8f84854f21fbbb319da81ac43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Order the data fabric register definitions by function number and
register offset.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia3066ad0f564520cb322a3e41a413eb3bf51260d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Now that the data fabric PCI device functions are included in the
register definitions, the remaining data fabric device function numbers
can be dropped from the define names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1a26402b8078d288a7e32c1668591d001fa3ede9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76889
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the data fabric PCI device functions are included in the
register definitions, the remaining data fabric device function numbers
can be dropped from the define names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia0355838ac1d513ba562fd6fb4672342dd383498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76888
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Instead of open coding the broadcast data fabric PCI register access in
the functions for indirect non-broadcast data fabric register access,
just use the existing data_fabric_broadcast_[read,write]32 functions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I174c1e6ee4856d97c5ec6d07bb8c217d6df9425f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To have both the PCI function number and the register offset into the
config space of that function of the data fabric device in the data
fabric register definitions, introduce and use the DF_REG_ID, DF_REG_FN
and DF_REG_REG macros. The DF_REG_ID macro is used for register
definitions where both the function number and the register offset are
specified, and the DF_REG_FN and DF_REG_REG macros are used to extract
the function number and the register offset from the register defines.
This will allow having one define for accessing an indexed group of
registers that are on different functions of the data fabric device.
TEST=MMIO resources read from the data fabric's MMIO decode registers
don't change on Mandolin and the ACPI CRAT table is also identical.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I63a284b26081c170a217b082b100c482f6158e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76886
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Debug messages shown during IDE initialization are streamlined as
follows:
"Primary IDE interface" (and similar) are shortened to
"Primary interface".
We don't need to see "IDE" twice as messages are already prefixed.
Refactor "IDE: (Primary) IDE interface: (on)" into
"IDE: (Primary interface): (on)" to allow compiler to deduplicate
component strings, also used later in messages re UDMA/33.
This reduces uncompressed string size by 32 bytes and allows ramstage
to compress a wee bit better.
Change-Id: I16f5c2b3775c5a73b83d83817d7075e944089a12
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73331
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
