diff options
Diffstat (limited to 'src')
12 files changed, 560 insertions, 80 deletions
diff --git a/src/mainboard/google/brya/variants/anahera/overridetree.cb b/src/mainboard/google/brya/variants/anahera/overridetree.cb index e670f4a0da..d2b4ea14da 100644 --- a/src/mainboard/google/brya/variants/anahera/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera/overridetree.cb @@ -301,13 +301,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref tcss_usb3_port3 on end end end @@ -319,19 +331,37 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 2)}" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -347,7 +377,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (DB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -360,13 +396,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (DB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 2)}" device ref usb3_port3 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb index e04ff886a7..e383f17ced 100644 --- a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb @@ -293,13 +293,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref tcss_usb3_port3 on end end end @@ -311,19 +323,37 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 2)}" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -339,7 +369,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (DB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -352,13 +388,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (DB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 2)}" device ref usb3_port3 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/felwinter/overridetree.cb b/src/mainboard/google/brya/variants/felwinter/overridetree.cb index f936c4bdcd..a493be1469 100644 --- a/src/mainboard/google/brya/variants/felwinter/overridetree.cb +++ b/src/mainboard/google/brya/variants/felwinter/overridetree.cb @@ -327,13 +327,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port2 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref tcss_usb3_port3 on end end end @@ -345,13 +357,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -362,7 +386,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -375,7 +405,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb3_port1 on end end end diff --git a/src/mainboard/google/brya/variants/gimble/overridetree.cb b/src/mainboard/google/brya/variants/gimble/overridetree.cb index 408d380ce2..88f4b07f17 100644 --- a/src/mainboard/google/brya/variants/gimble/overridetree.cb +++ b/src/mainboard/google/brya/variants/gimble/overridetree.cb @@ -264,13 +264,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref tcss_usb3_port3 on end end end @@ -282,13 +294,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref usb2_port2 on end end chip drivers/usb/acpi @@ -300,7 +324,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port8 on end end chip drivers/usb/acpi @@ -313,7 +343,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port2 on end end end diff --git a/src/mainboard/google/brya/variants/gimble4es/overridetree.cb b/src/mainboard/google/brya/variants/gimble4es/overridetree.cb index 0dd8c75934..7cfcdb2411 100644 --- a/src/mainboard/google/brya/variants/gimble4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/gimble4es/overridetree.cb @@ -232,13 +232,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref tcss_usb3_port3 on end end end @@ -250,13 +262,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref usb2_port2 on end end chip drivers/usb/acpi @@ -268,7 +292,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port8 on end end chip drivers/usb/acpi @@ -281,7 +311,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port2 on end end end diff --git a/src/mainboard/google/brya/variants/kano/overridetree.cb b/src/mainboard/google/brya/variants/kano/overridetree.cb index 212173758b..d142257b00 100644 --- a/src/mainboard/google/brya/variants/kano/overridetree.cb +++ b/src/mainboard/google/brya/variants/kano/overridetree.cb @@ -511,13 +511,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref tcss_usb3_port3 on end end end @@ -529,13 +541,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -548,7 +572,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0 (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -561,7 +591,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0 (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb3_port1 on end end end diff --git a/src/mainboard/google/brya/variants/primus/overridetree.cb b/src/mainboard/google/brya/variants/primus/overridetree.cb index a12de65622..6d4522bba0 100644 --- a/src/mainboard/google/brya/variants/primus/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus/overridetree.cb @@ -318,13 +318,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref tcss_usb3_port3 on end end end @@ -336,13 +348,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -358,13 +382,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port8 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -377,13 +413,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port2 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/primus4es/overridetree.cb b/src/mainboard/google/brya/variants/primus4es/overridetree.cb index dc0dfbfb22..d4f7237423 100644 --- a/src/mainboard/google/brya/variants/primus4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus4es/overridetree.cb @@ -312,13 +312,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref tcss_usb3_port3 on end end end @@ -330,13 +342,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_CENTER, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -352,13 +376,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port8 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -371,13 +407,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(1, 2)}" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port2 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/redrix/overridetree.cb b/src/mainboard/google/brya/variants/redrix/overridetree.cb index 0698568495..b29e42e574 100644 --- a/src/mainboard/google/brya/variants/redrix/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix/overridetree.cb @@ -473,13 +473,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref tcss_usb3_port3 on end end end @@ -491,13 +503,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -513,7 +537,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -526,7 +556,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port1 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb index fc939c7335..40cc0cd6a2 100644 --- a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb @@ -459,13 +459,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref tcss_usb3_port3 on end end end @@ -477,13 +489,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(3, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(3, 1)}" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -499,7 +523,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -512,7 +542,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port1 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/taeko/overridetree.cb b/src/mainboard/google/brya/variants/taeko/overridetree.cb index 05eca506be..2bddcd7c93 100644 --- a/src/mainboard/google/brya/variants/taeko/overridetree.cb +++ b/src/mainboard/google/brya/variants/taeko/overridetree.cb @@ -454,13 +454,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref tcss_usb3_port3 on probe DB_USB DB_USB3_NO_A end @@ -474,13 +486,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref usb2_port3 on probe DB_USB DB_USB3_NO_A end @@ -494,7 +518,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -507,7 +537,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port1 on end end end diff --git a/src/mainboard/google/brya/variants/taeko4es/overridetree.cb b/src/mainboard/google/brya/variants/taeko4es/overridetree.cb index 80aaad5323..569f223995 100644 --- a/src/mainboard/google/brya/variants/taeko4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/taeko4es/overridetree.cb @@ -440,13 +440,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref tcss_usb3_port3 on probe DB_USB DB_USB3_NO_A end @@ -460,13 +472,25 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(1, 1)}" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_RIGHT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_OVAL, + .group = ACPI_PLD_GROUP(2, 1)}" device ref usb2_port3 on probe DB_USB DB_USB3_NO_A end @@ -480,7 +504,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port (MLB)"" register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -493,7 +523,13 @@ chip soc/intel/alderlake chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port (MLB)"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(4, 1)" + register "use_custom_pld" = "true" + register "custom_pld" = "{ + .visible = true, + .panel = PLD_PANEL_LEFT, + .horizontal_position = PLD_HORIZONTAL_POSITION_LEFT, + .shape = PLD_SHAPE_HORIZONTAL_RECTANGLE, + .group = ACPI_PLD_GROUP(4, 1)}" device ref usb3_port1 on end end end |