diff options
Diffstat (limited to 'src/superio/ite/it8772f/it8772f.h')
| -rw-r--r-- | src/superio/ite/it8772f/it8772f.h | 80 |
1 files changed, 0 insertions, 80 deletions
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h index 38cfe3b20e..4df21c58cb 100644 --- a/src/superio/ite/it8772f/it8772f.h +++ b/src/superio/ite/it8772f/it8772f.h @@ -3,13 +3,6 @@ #ifndef SUPERIO_ITE_IT8772F_H #define SUPERIO_ITE_IT8772F_H -/* Supported thermal mode on TMPINx */ -enum thermal_mode { - THERMAL_MODE_DISABLED = 0, - THERMAL_DIODE, - THERMAL_RESISTOR, -}; - #define IT8772F_FDC 0x00 /* Floppy disk controller */ #define IT8772F_SP1 0x01 /* Com1 */ #define IT8772F_EC 0x04 /* Environment controller */ @@ -18,71 +11,6 @@ enum thermal_mode { #define IT8772F_GPIO 0x07 /* GPIO */ #define IT8772F_IR 0x0a /* Consumer IR */ -/* Environmental Controller interface */ -#define IT8772F_CONFIGURATION 0x00 -#define IT8772F_INTERFACE_SELECT 0x0a -#define IT8772F_INTERFACE_PSEUDO_EOC (1 << 7) -#define IT8772F_INTERFACE_SMB_ENABLE (1 << 6) -#define IT8772F_INTERFACE_SEL_DISABLE (0 << 4) -#define IT8772F_INTERFACE_SEL_SST_SLAVE (1 << 4) -#define IT8772F_INTERFACE_SEL_PECI (2 << 4) -#define IT8772F_INTERFACE_SEL_SST_HOST (3 << 4) -#define IT8772F_INTERFACE_CLOCK_32MHZ (0 << 3) -#define IT8772F_INTERFACE_CLOCK_24MHZ (1 << 3) -#define IT8772F_INTERFACE_SPEED_TOLERANCE (1 << 2) -#define IT8772F_INTERFACE_PECI_AWFCS (1 << 0) -#define IT8772F_FAN_TAC2_READ 0x0e -#define IT8772F_FAN_TAC3_READ 0x0f -#define IT8772F_FAN_MAIN_CTL 0x13 -#define IT8772F_FAN_MAIN_CTL_TAC_SMART(x) (1 << ((x)-1)) -#define IT8772F_FAN_MAIN_CTL_TAC_EN(x) (1 << ((x)+3)) -#define IT8772F_FAN_CTL_MODE 0x14 -#define IT8772F_FAN_CTL_ON(x) (1 << ((x)-1)) -#define IT8772F_FAN_PWM_MIN_DUTY (1 << 3) -#define IT8772F_FAN_PWM_CLOCK_48MHZ (0 << 4) -#define IT8772F_FAN_PWM_CLOCK_24MHZ (1 << 4) -#define IT8772F_FAN_PWM_CLOCK_8MHZ (3 << 4) -#define IT8772F_FAN_PWM_CLOCK_6MHZ (4 << 4) -#define IT8772F_FAN_PWM_CLOCK_3MHZ (5 << 4) -#define IT8772F_FAN_PWM_CLOCK_1_5MHZ (6 << 4) -#define IT8772F_FAN_PWM_CLOCK_51KHZ (7 << 4) -#define IT8772F_FAN_CTL_POLARITY_LOW (0 << 7) -#define IT8772F_FAN_CTL_POLARITY_HIGH (1 << 7) -#define IT8772F_FAN_CTL2_PWM_MODE 0x16 -#define IT8772F_FAN_CTL3_PWM_MODE 0x17 -#define IT8772F_FAN_CTL_PWM_MODE_SOFTWARE (0 << 7) -#define IT8772F_FAN_CTL_PWM_MODE_AUTOMATIC (1 << 7) -#define IT8772F_ADC_TEMP_CHANNEL_ENABLE 0x51 -#define IT8772F_FAN_CTL2_PWM_START 0x6b -#define IT8772F_FAN_CTL2_AUTO_MODE 0x6c -#define IT8772F_FAN_CTL3_PWM_START 0x73 -#define IT8772F_FAN_CTL3_AUTO_MODE 0x74 -#define IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS (0 << 7) -#define IT8772F_FAN_CTL_AUTO_SMOOTHING_EN (1 << 7) -#define IT8772F_EXTEMP_STATUS 0x88 -#define IT8772F_EXTEMP_STATUS_HOST_BUSY (1 << 0) -#define IT8772F_EXTEMP_ADDRESS 0x89 -#define IT8772F_EXTEMP_WRITE_LENGTH 0x8a -#define IT8772F_EXTEMP_READ_LENGTH 0x8b -#define IT8772F_EXTEMP_COMMAND 0x8c -#define IT8772F_EXTEMP_WRITE_DATA_2 0x8d -#define IT8772F_EXTEMP_CONTROL 0x8e -#define IT8772F_EXTEMP_CONTROL_AUTO_32HZ (0 << 6) -#define IT8772F_EXTEMP_CONTROL_AUTO_16HZ (1 << 6) -#define IT8772F_EXTEMP_CONTROL_AUTO_8HZ (2 << 6) -#define IT8772F_EXTEMP_CONTROL_AUTO_4HZ (3 << 6) -#define IT8772F_EXTEMP_CONTROL_AUTO_START (1 << 5) -#define IT8772F_EXTEMP_CONTROL_AUTO_ABORT (1 << 4) -#define IT8772F_EXTEMP_CONTROL_AUTO_TWO_DOMAIN (1 << 3) -#define IT8772F_EXTEMP_CONTROL_CONTENTION (1 << 2) -#define IT8772F_EXTEMP_CONTROL_SST_IDLE_HIGH (1 << 1) -#define IT8772F_EXTEMP_CONTROL_START (1 << 0) - -/* Standard PECI GetTemp */ -#define PECI_CLIENT_ADDRESS 0x30 -#define PECI_GETTEMP_COMMAND 0x01 -#define PECI_GETTEMP_WRITE_LENGTH 0x01 -#define PECI_GETTEMP_READ_LENGTH 0x02 /* GPIO interface */ #define IT8772F_GPIO_LED_BLINK1_PINMAP 0xf8 @@ -115,17 +43,9 @@ enum thermal_mode { #include <device/pnp_type.h> #include <stdint.h> -void it8772f_ac_resume_southbridge(pnp_devfn_t dev); void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup, u8 output, u8 enable); -/* FIXME: should be static so will be removed later.. */ -/* Global configuration registers. */ -#define IT8772F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8772F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ - -void it8772f_enter_conf(pnp_devfn_t dev); -void it8772f_exit_conf(pnp_devfn_t dev); void it8772f_gpio_led(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup, u8 output, u8 enable, u8 led_pin_map, u8 led_freq); |