1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef SUPERIO_ITE_IT8772F_H
#define SUPERIO_ITE_IT8772F_H
#define IT8772F_FDC 0x00 /* Floppy disk controller */
#define IT8772F_SP1 0x01 /* Com1 */
#define IT8772F_EC 0x04 /* Environment controller */
#define IT8772F_KBCK 0x05 /* Keyboard */
#define IT8772F_KBCM 0x06 /* Mouse */
#define IT8772F_GPIO 0x07 /* GPIO */
#define IT8772F_IR 0x0a /* Consumer IR */
/* GPIO interface */
#define IT8772F_GPIO_LED_BLINK1_PINMAP 0xf8
#define SIO_GPIO_BLINK_GPIO10 0x08
#define SIO_GPIO_BLINK_GPIO22 0x12
#define SIO_GPIO_BLINK_GPIO45 0x25
#define IT8772F_GPIO_LED_BLINK1_CONTROL 0xf9
#define IT8772F_GPIO_BLINK_FREQUENCY_4_HZ (0<<1)
#define IT8772F_GPIO_BLINK_FREQUENCY_1_HZ (1<<1)
#define IT8772F_GPIO_BLINK_FREQUENCY_1_4_HZ (2<<1)
#define IT8772F_GPIO_BLINK_FREQUENCY_1_8_HZ (3<<1)
#define GPIO_REG_SELECT(x) (0x25 + (x))
/* GPIO Polarity Select: 1: Inverting, 0: Non-inverting */
#define GPIO_REG_POLARITY(x) (0xb0 + (x))
/* GPIO Internal Pull-up: 1: Enable, 0: Disable */
#define GPIO_REG_PULLUP(x) (0xb8 + (x))
/* GPIO Function Select: 1: Simple I/O, 0: Alternate function */
#define GPIO_REG_ENABLE(x) (0xc0 + (x))
/* GPIO Mode: 0: input mode, 1: output mode */
#define GPIO_REG_OUTPUT(x) (0xc8 + (x))
#include <device/pnp_type.h>
#include <stdint.h>
void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity,
u8 pullup, u8 output, u8 enable);
void it8772f_gpio_led(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup,
u8 output, u8 enable, u8 led_pin_map, u8 led_freq);
#endif /* SUPERIO_ITE_IT8772F_H */
|
