summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/mainboard/Kconfig3
-rw-r--r--src/mainboard/olpc/Kconfig20
-rw-r--r--src/mainboard/olpc/btest/Kconfig26
-rw-r--r--src/mainboard/olpc/btest/Makefile.inc1
-rw-r--r--src/mainboard/olpc/btest/chip.h3
-rw-r--r--src/mainboard/olpc/btest/cmos.layout75
-rw-r--r--src/mainboard/olpc/btest/devicetree.cb44
-rw-r--r--src/mainboard/olpc/btest/irq_tables.c31
-rw-r--r--src/mainboard/olpc/btest/mainboard.c137
-rw-r--r--src/mainboard/olpc/btest/romstage.c182
-rw-r--r--src/mainboard/olpc/rev_a/Kconfig26
-rw-r--r--src/mainboard/olpc/rev_a/Makefile.inc1
-rw-r--r--src/mainboard/olpc/rev_a/chip.h3
-rw-r--r--src/mainboard/olpc/rev_a/cmos.layout75
-rw-r--r--src/mainboard/olpc/rev_a/devicetree.cb44
-rw-r--r--src/mainboard/olpc/rev_a/irq_tables.c31
-rw-r--r--src/mainboard/olpc/rev_a/mainboard.c108
-rw-r--r--src/mainboard/olpc/rev_a/romstage.c182
18 files changed, 0 insertions, 992 deletions
diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig
index db98c0fbd9..db1112826d 100644
--- a/src/mainboard/Kconfig
+++ b/src/mainboard/Kconfig
@@ -80,8 +80,6 @@ config VENDOR_NOKIA
bool "Nokia"
config VENDOR_NVIDIA
bool "NVIDIA"
-config VENDOR_OLPC
- bool "OLPC"
config VENDOR_PC_ENGINES
bool "PC Engines"
config VENDOR_RCA
@@ -153,7 +151,6 @@ source "src/mainboard/nec/Kconfig"
source "src/mainboard/newisys/Kconfig"
source "src/mainboard/nokia/Kconfig"
source "src/mainboard/nvidia/Kconfig"
-source "src/mainboard/olpc/Kconfig"
source "src/mainboard/pcengines/Kconfig"
source "src/mainboard/rca/Kconfig"
source "src/mainboard/roda/Kconfig"
diff --git a/src/mainboard/olpc/Kconfig b/src/mainboard/olpc/Kconfig
deleted file mode 100644
index c297f3295a..0000000000
--- a/src/mainboard/olpc/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if VENDOR_OLPC
-
-choice
- prompt "Mainboard model"
-
-config BOARD_OLPC_BTEST
- bool "btest"
-config BOARD_OLPC_REV_A
- bool "rev_a"
-
-endchoice
-
-source "src/mainboard/olpc/btest/Kconfig"
-source "src/mainboard/olpc/rev_a/Kconfig"
-
-config MAINBOARD_VENDOR
- string
- default "OLPC"
-
-endif # VENDOR_OLPC
diff --git a/src/mainboard/olpc/btest/Kconfig b/src/mainboard/olpc/btest/Kconfig
deleted file mode 100644
index a8405e2ee4..0000000000
--- a/src/mainboard/olpc/btest/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-if BOARD_OLPC_BTEST
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select ARCH_X86
- select CPU_AMD_GX2
- select NORTHBRIDGE_AMD_GX2
- select SOUTHBRIDGE_AMD_CS5536
- select UDELAY_TSC
- select CACHE_AS_RAM
- select HAVE_PIRQ_TABLE
- select BOARD_ROMSIZE_KB_256
-
-config MAINBOARD_DIR
- string
- default olpc/btest
-
-config MAINBOARD_PART_NUMBER
- string
- default "btest"
-
-config IRQ_SLOT_COUNT
- int
- default 2
-
-endif # BOARD_OLPC_BTEST
diff --git a/src/mainboard/olpc/btest/Makefile.inc b/src/mainboard/olpc/btest/Makefile.inc
deleted file mode 100644
index aa29c17dc1..0000000000
--- a/src/mainboard/olpc/btest/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ROMCCFLAGS=-mcpu=p2 -O
diff --git a/src/mainboard/olpc/btest/chip.h b/src/mainboard/olpc/btest/chip.h
deleted file mode 100644
index d138e51b94..0000000000
--- a/src/mainboard/olpc/btest/chip.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern struct chip_operations mainboard_ops;
-
-struct mainboard_config {};
diff --git a/src/mainboard/olpc/btest/cmos.layout b/src/mainboard/olpc/btest/cmos.layout
deleted file mode 100644
index 864d89ad2a..0000000000
--- a/src/mainboard/olpc/btest/cmos.layout
+++ /dev/null
@@ -1,75 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 1 e 0 dcon_present
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 1007 1008
-
-
diff --git a/src/mainboard/olpc/btest/devicetree.cb b/src/mainboard/olpc/btest/devicetree.cb
deleted file mode 100644
index 6fec1f0184..0000000000
--- a/src/mainboard/olpc/btest/devicetree.cb
+++ /dev/null
@@ -1,44 +0,0 @@
-chip northbridge/amd/gx2
- register "irqmap" = "0xaa5b"
- device lapic_cluster 0 on
- chip cpu/amd/model_gx2
- device lapic 0 on end
- end
- end
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080.
- # Frame Pulse Width = 4clocks
- # IRQ Data Frames = 17Frames
- # SIRQ Mode = continous , It would be better if the EC could operate in
- # Active(Quiet) mode. Save power....
- # SIRQ Enable = Enabled
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- #register "lpc_irq" = "0x00001002"
- #register "lpc_serirq_enable" = "0xEFFD0080"
- #register "enable_gpio0_inta" = "1"
- #register "enable_ide_nand_flash" = "1"
- #register "enable_uarta" = "1"
- #register "enable_USBP4_host" = "1"
- #register "audio_irq" = "5"
- #register "usbf4_irq" = "10"
- #register "usbf5_irq" = "10"
- #register "usbf6_irq" = "0"
- #register "usbf7_irq" = "0"
- device pci d.0 on end # Realtek 8139 LAN
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC
- register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG
- register "unwanted_vpci[2]" = "0" # End of list has a zero
- end
- end
-end
-
diff --git a/src/mainboard/olpc/btest/irq_tables.c b/src/mainboard/olpc/btest/irq_tables.c
deleted file mode 100644
index adbe0d1acb..0000000000
--- a/src/mainboard/olpc/btest/irq_tables.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
- 0x00, /* Where the interrupt router lies (bus) */
- (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
- 0x800, /* IRQs devoted exclusively to PCI usage */
- 0x1078, /* Vendor */
- 0x2, /* Device */
- 0, /* Miniport data */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
- {
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0},
- {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/olpc/btest/mainboard.c b/src/mainboard/olpc/btest/mainboard.c
deleted file mode 100644
index c6b86ef18d..0000000000
--- a/src/mainboard/olpc/btest/mainboard.c
+++ /dev/null
@@ -1,137 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <pc80/mc146818rtc.h>
-#include "chip.h"
-#include "southbridge/amd/cs5536/cs5536_smbus2.h"
-#include <cpu/amd/vr.h>
-
-/* Borrowed from mc146818rtc.c */
-
-#define CMOS_READ(addr) ({ \
- outb((addr),RTC_PORT(0)); \
- inb(RTC_PORT(1)); \
- })
-
-#define CMOS_WRITE(val, addr) ({ \
- outb((addr),RTC_PORT(0)); \
- outb((val),RTC_PORT(1)); \
- })
-
-static void write_bit(unsigned char val) {
-
- unsigned char byte = CMOS_READ(440 / 8);
-
- /* Don't change it if its already set */
-
- if ((byte & 1) == (val & 1))
- return;
-
- byte &= ~1;
- byte |= val & 1;
- CMOS_WRITE(val, 440/8);
-}
-
-static unsigned short _getsmbusbase(void) {
- unsigned devfn = PCI_DEVFN(0xf, 0);
- device_t dev = dev_find_slot(0x0, devfn);
- unsigned long addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
-
- return (unsigned short) (addr & ~1);
-}
-
-static void init_dcon(void) {
-
- int ret = 1;
- unsigned short rev = 0;
- unsigned short iobase = _getsmbusbase();
-
- printk(BIOS_DEBUG, "CHECKING FOR DCON (%x)\n", iobase);
-
- /* Get the IO base for the SMBUS */
-
- rev = do_smbus_read_word(iobase, 0x0D << 1, 0x00);
-
- if (rev & 0xDC00) {
- printk(BIOS_DEBUG, "DCON FOUND - REV %x\n", rev);
-
- /* Enable the DCON */
- ret = do_smbus_write_word(iobase, 0x0D << 1, 0x01, 0x0069);
- if (ret != 0)
- printk(BIOS_DEBUG, "DCON ENABLE FAILED %d\n", ret);
- }
- else
- printk(BIOS_DEBUG, "DCON NOT FOUND (%x)\n", rev);
-
- write_bit(rev > 0 ? 1 : 0);
-}
-
-static void
-init_cafe_irq(void){
- const unsigned char slots_cafe[4] = {11, 0, 0, 0};
-
-
- /* CAFE PCI slots */
- pci_assign_irqs(0, 0x0C, slots_cafe);
-
- /* Make the pin assignments - NOTENOTENOTE: This should be
- * configurable!
- */
-
- /* Configure the GPIO pins to use - class 0, index 9 to configure
- * AB. Write 0xFF to disable
- */
-
- vrWrite(0x9, 0XFF00);
-
- /* Configure the GPIO pins to use - class 0, index A to configure
- * CD. Write 0xFF to disable
- */
-
- vrWrite(0xA, 0xFFFF);
-
-}
-
-
-static void init(struct device *dev) {
-/*
- unsigned bus = 0;
- unsigned devfn = PCI_DEVFN(0xf, 4);
- device_t usb = NULL;
- unsigned char usbirq = 0xa;
-*/
-
- printk(BIOS_DEBUG, "OLPC BTEST ENTER %s\n", __func__);
-
-#if 0
- /* I can't think of any reason NOT to just set this. If it turns out we want this to be
- * conditional we can make it a config variable later.
- */
-
- printk(BIOS_DEBUG, "%s (%x,%x)SET USB PCI interrupt line to %d\n",
- __func__, bus, devfn, usbirq);
- usb = dev_find_slot(bus, devfn);
- if (! usb){
- printk(BIOS_ERR, "Could not find USB\n");
- } else {
- pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq);
- }
-#endif
-
- init_dcon();
- init_cafe_irq();
- printk(BIOS_DEBUG, "OLPC BTEST EXIT %s\n", __func__);
-}
-
-static void enable_dev(struct device *dev)
-{
- dev->ops->init = init;
-}
-
-struct chip_operations mainboard_ops = {
- CHIP_NAME("OLPC btest Mainboard")
- .enable_dev = enable_dev,
-};
diff --git a/src/mainboard/olpc/btest/romstage.c b/src/mainboard/olpc/btest/romstage.c
deleted file mode 100644
index 7f8779f720..0000000000
--- a/src/mainboard/olpc/btest/romstage.c
+++ /dev/null
@@ -1,182 +0,0 @@
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/hlt.h>
-#include <console/console.h>
-#include "lib/ramtest.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/x86/bist.h"
-#include "cpu/x86/msr.h"
-#include <cpu/amd/gx2def.h>
-#include <cpu/amd/geode_post_code.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
-#include "southbridge/amd/cs5536/cs5536_early_setup.c"
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/gx2/raminit.h"
-
-static inline unsigned int fls(unsigned int x)
-{
- int r;
-
- __asm__("bsfl %1,%0\n\t"
- "jnz 1f\n\t"
- "movl $32,%0\n"
- "1:" : "=r" (r) : "g" (x));
- return r;
-}
-
-/* sdram parameters for OLPC:
- row address = 13
- col address = 9
- banks = 4
- dimm0size=128MB
- d0_MB=1 (module banks)
- d0_cb=4 (component banks)
- do_psz=4KB (page size)
- Trc=10 (clocks) (ref2act)
- Tras=7 (act2pre)
- Trcd=3 (act2cmd)
- Trp=3 (pre2act)
- Trrd=2 (act2act)
- Tref=17.8ms
- */
-static void sdram_set_spd_registers(const struct mem_controller *ctrl)
-{
- /* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
- * component Banks (byte 17) * module banks, side (byte 5) *
- * width in bits (byte 6,7)
- * = Density per side (byte 31) * number of sides (byte 5) */
- /* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */
- msr_t msr;
- unsigned char module_banks, val;
-
- msr = rdmsr(MC_CF07_DATA);
-
- /* get module banks (sides) per dimm, SPD byte 5 */
- module_banks = 1;
- module_banks >>= 1;
- msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
- msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
-
- /* get component banks per module bank, SPD byte 17 */
- val = 4;
- val >>= 2;
- msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT);
-
- /* get the module bank density, SPD byte 31 */
- /* this is multiples of 8 MB */
- /* actually it is 2^x*4, where x is the value you put in */
- /* for OLPC, set default size */
- /* dimm size - hardcoded 128Mb */
- val = 5;
- msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT);
-
- /* page size = 2^col address */
- val = 2; /* 4096 bytes */
- msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT);
-
- print_debug("computed msr.hi ");
- print_debug_hex32(msr.hi);
- print_debug("\n");
-
- /* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */
- /* well, it may be close. It's about 200,000 ticks */
- msr.lo = 0x00003000;
- wrmsr(MC_CF07_DATA, msr);
-
- /* timing and mode ... */
-
- msr = rdmsr(0x20000019);
-
- /* per standard bios settings */
-
- msr.hi = 0x18000108;
- msr.lo =
- (6<<28) | // cas_lat
- (10<<24)| // ref2act
- (7<<20)| // act2pre
- (3<<16)| // pre2act
- (3<<12)| // act2cmd
- (2<<8)| // act2act
- (2<<6)| // dplwr
- (2<<4)| // dplrd
- (3); // dal
- /* the msr value reported by quanta is very, very different.
- * we will go with that value for now.
- */
- msr.lo = 0x286332a3;
-
- wrmsr(0x20000019, msr);
-
-}
-
-#include "northbridge/amd/gx2/raminit.c"
-#include "lib/generic_sdram.c"
-
-#define PLLMSRhi 0x00001490
-#define PLLMSRlo 0x02000030
-#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
-#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
-#include "northbridge/amd/gx2/pll_reset.c"
-#include "cpu/amd/model_gx2/cpureginit.c"
-#include "cpu/amd/model_gx2/syspreinit.c"
-#include "cpu/amd/model_lx/msrinit.c"
-
-static void gpio_init(void)
-{
- unsigned long m;
-
- /* Make sure events enable for gpio 12 is off */
-
- m = inl(GPIOL_EVENTS_ENABLE);
- m &= ~GPIOL_12_SET;
- m |= GPIOL_12_CLEAR;
- outl(m, GPIOL_EVENTS_ENABLE);
-}
-
-void main(unsigned long bist)
-{
- static const struct mem_controller memctrl [] = {
- {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
- };
-
- SystemPreInit();
- msr_init();
-
- cs5536_early_setup();
-
- /* NOTE: must do this AFTER the early_setup!
- * it is counting on some early MSR setup
- * for cs5536
- */
- cs5536_setup_onchipuart(1);
- gpio_init();
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- pll_reset();
-
- cpuRegInit();
- print_err("done cpuRegInit\n");
-
- sdram_initialize(1, memctrl);
-
- /* Check all of memory */
- //ram_check(0x00000000, 640*1024);
-}
-
diff --git a/src/mainboard/olpc/rev_a/Kconfig b/src/mainboard/olpc/rev_a/Kconfig
deleted file mode 100644
index 591ad5e689..0000000000
--- a/src/mainboard/olpc/rev_a/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-if BOARD_OLPC_REV_A
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select ARCH_X86
- select CPU_AMD_GX2
- select NORTHBRIDGE_AMD_GX2
- select SOUTHBRIDGE_AMD_CS5536
- select UDELAY_TSC
- select CACHE_AS_RAM
- select HAVE_PIRQ_TABLE
- select BOARD_ROMSIZE_KB_256
-
-config MAINBOARD_DIR
- string
- default olpc/rev_a
-
-config MAINBOARD_PART_NUMBER
- string
- default "rev_a"
-
-config IRQ_SLOT_COUNT
- int
- default 2
-
-endif # BOARD_OLPC_REV_A
diff --git a/src/mainboard/olpc/rev_a/Makefile.inc b/src/mainboard/olpc/rev_a/Makefile.inc
deleted file mode 100644
index aa29c17dc1..0000000000
--- a/src/mainboard/olpc/rev_a/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ROMCCFLAGS=-mcpu=p2 -O
diff --git a/src/mainboard/olpc/rev_a/chip.h b/src/mainboard/olpc/rev_a/chip.h
deleted file mode 100644
index d138e51b94..0000000000
--- a/src/mainboard/olpc/rev_a/chip.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern struct chip_operations mainboard_ops;
-
-struct mainboard_config {};
diff --git a/src/mainboard/olpc/rev_a/cmos.layout b/src/mainboard/olpc/rev_a/cmos.layout
deleted file mode 100644
index 864d89ad2a..0000000000
--- a/src/mainboard/olpc/rev_a/cmos.layout
+++ /dev/null
@@ -1,75 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 1 e 0 dcon_present
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 1007 1008
-
-
diff --git a/src/mainboard/olpc/rev_a/devicetree.cb b/src/mainboard/olpc/rev_a/devicetree.cb
deleted file mode 100644
index 6fec1f0184..0000000000
--- a/src/mainboard/olpc/rev_a/devicetree.cb
+++ /dev/null
@@ -1,44 +0,0 @@
-chip northbridge/amd/gx2
- register "irqmap" = "0xaa5b"
- device lapic_cluster 0 on
- chip cpu/amd/model_gx2
- device lapic 0 on end
- end
- end
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080.
- # Frame Pulse Width = 4clocks
- # IRQ Data Frames = 17Frames
- # SIRQ Mode = continous , It would be better if the EC could operate in
- # Active(Quiet) mode. Save power....
- # SIRQ Enable = Enabled
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- #register "lpc_irq" = "0x00001002"
- #register "lpc_serirq_enable" = "0xEFFD0080"
- #register "enable_gpio0_inta" = "1"
- #register "enable_ide_nand_flash" = "1"
- #register "enable_uarta" = "1"
- #register "enable_USBP4_host" = "1"
- #register "audio_irq" = "5"
- #register "usbf4_irq" = "10"
- #register "usbf5_irq" = "10"
- #register "usbf6_irq" = "0"
- #register "usbf7_irq" = "0"
- device pci d.0 on end # Realtek 8139 LAN
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC
- register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG
- register "unwanted_vpci[2]" = "0" # End of list has a zero
- end
- end
-end
-
diff --git a/src/mainboard/olpc/rev_a/irq_tables.c b/src/mainboard/olpc/rev_a/irq_tables.c
deleted file mode 100644
index adbe0d1acb..0000000000
--- a/src/mainboard/olpc/rev_a/irq_tables.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
- 0x00, /* Where the interrupt router lies (bus) */
- (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
- 0x800, /* IRQs devoted exclusively to PCI usage */
- 0x1078, /* Vendor */
- 0x2, /* Device */
- 0, /* Miniport data */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
- {
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0},
- {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/olpc/rev_a/mainboard.c b/src/mainboard/olpc/rev_a/mainboard.c
deleted file mode 100644
index 2c2464be32..0000000000
--- a/src/mainboard/olpc/rev_a/mainboard.c
+++ /dev/null
@@ -1,108 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <pc80/mc146818rtc.h>
-#include "chip.h"
-#include "southbridge/amd/cs5536/cs5536_smbus2.h"
-
-/* Borrowed from mc146818rtc.c */
-
-#define CMOS_READ(addr) ({ \
- outb((addr),RTC_PORT(0)); \
- inb(RTC_PORT(1)); \
- })
-
-#define CMOS_WRITE(val, addr) ({ \
- outb((addr),RTC_PORT(0)); \
- outb((val),RTC_PORT(1)); \
- })
-
-static void write_bit(unsigned char val) {
-
- unsigned char byte = CMOS_READ(440 / 8);
-
- /* Don't change it if its already set */
-
- if ((byte & 1) == (val & 1))
- return;
-
- byte &= ~1;
- byte |= val & 1;
- CMOS_WRITE(val, 440/8);
-}
-
-static unsigned short _getsmbusbase(void) {
- unsigned devfn = PCI_DEVFN(0xf, 0);
- device_t dev = dev_find_slot(0x0, devfn);
- unsigned long addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
-
- return (unsigned short) (addr & ~1);
-}
-
-static void init_dcon(void) {
-
- int ret = 1;
- unsigned short rev = 0;
- unsigned short iobase = _getsmbusbase();
-
- printk(BIOS_DEBUG, "CHECKING FOR DCON (%x)\n", iobase);
-
- /* Get the IO base for the SMBUS */
-
- rev = do_smbus_read_word(iobase, 0x0D << 1, 0x00);
-
- if (rev & 0xDC00) {
- printk(BIOS_DEBUG, "DCON FOUND - REV %x\n", rev);
-
- /* Enable the DCON */
- ret = do_smbus_write_word(iobase, 0x0D << 1, 0x01, 0x0069);
- if (ret != 0)
- printk(BIOS_DEBUG, "DCON ENABLE FAILED %d\n", ret);
- }
- else
- printk(BIOS_DEBUG, "DCON NOT FOUND (%x)\n", rev);
-
- write_bit(rev > 0 ? 1 : 0);
-}
-
-static void init(struct device *dev) {
-/*
- unsigned bus = 0;
- unsigned devfn = PCI_DEVFN(0xf, 4);
- device_t usb = NULL;
- unsigned char usbirq = 0xa;
-*/
-
- printk(BIOS_DEBUG, "OLPC REVA ENTER %s\n", __func__);
-
-#if 0
- /* I can't think of any reason NOT to just set this. If it turns out we want this to be
- * conditional we can make it a config variable later.
- */
-
- printk(BIOS_DEBUG, "%s (%x,%x)SET USB PCI interrupt line to %d\n",
- __func__, bus, devfn, usbirq);
- usb = dev_find_slot(bus, devfn);
- if (! usb){
- printk(BIOS_ERR, "Could not find USB\n");
- } else {
- pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq);
- }
-#endif
-
- init_dcon();
- printk(BIOS_DEBUG, "OLPC REVA EXIT %s\n", __func__);
-}
-
-static void enable_dev(struct device *dev)
-{
- dev->ops->init = init;
-}
-
-struct chip_operations mainboard_ops = {
- CHIP_NAME("OLPC rev_a Mainboard")
- .enable_dev = enable_dev,
-};
diff --git a/src/mainboard/olpc/rev_a/romstage.c b/src/mainboard/olpc/rev_a/romstage.c
deleted file mode 100644
index 7f8779f720..0000000000
--- a/src/mainboard/olpc/rev_a/romstage.c
+++ /dev/null
@@ -1,182 +0,0 @@
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/hlt.h>
-#include <console/console.h>
-#include "lib/ramtest.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/x86/bist.h"
-#include "cpu/x86/msr.h"
-#include <cpu/amd/gx2def.h>
-#include <cpu/amd/geode_post_code.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
-#include "southbridge/amd/cs5536/cs5536_early_setup.c"
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/gx2/raminit.h"
-
-static inline unsigned int fls(unsigned int x)
-{
- int r;
-
- __asm__("bsfl %1,%0\n\t"
- "jnz 1f\n\t"
- "movl $32,%0\n"
- "1:" : "=r" (r) : "g" (x));
- return r;
-}
-
-/* sdram parameters for OLPC:
- row address = 13
- col address = 9
- banks = 4
- dimm0size=128MB
- d0_MB=1 (module banks)
- d0_cb=4 (component banks)
- do_psz=4KB (page size)
- Trc=10 (clocks) (ref2act)
- Tras=7 (act2pre)
- Trcd=3 (act2cmd)
- Trp=3 (pre2act)
- Trrd=2 (act2act)
- Tref=17.8ms
- */
-static void sdram_set_spd_registers(const struct mem_controller *ctrl)
-{
- /* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
- * component Banks (byte 17) * module banks, side (byte 5) *
- * width in bits (byte 6,7)
- * = Density per side (byte 31) * number of sides (byte 5) */
- /* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */
- msr_t msr;
- unsigned char module_banks, val;
-
- msr = rdmsr(MC_CF07_DATA);
-
- /* get module banks (sides) per dimm, SPD byte 5 */
- module_banks = 1;
- module_banks >>= 1;
- msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
- msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
-
- /* get component banks per module bank, SPD byte 17 */
- val = 4;
- val >>= 2;
- msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT);
-
- /* get the module bank density, SPD byte 31 */
- /* this is multiples of 8 MB */
- /* actually it is 2^x*4, where x is the value you put in */
- /* for OLPC, set default size */
- /* dimm size - hardcoded 128Mb */
- val = 5;
- msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT);
-
- /* page size = 2^col address */
- val = 2; /* 4096 bytes */
- msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT);
-
- print_debug("computed msr.hi ");
- print_debug_hex32(msr.hi);
- print_debug("\n");
-
- /* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */
- /* well, it may be close. It's about 200,000 ticks */
- msr.lo = 0x00003000;
- wrmsr(MC_CF07_DATA, msr);
-
- /* timing and mode ... */
-
- msr = rdmsr(0x20000019);
-
- /* per standard bios settings */
-
- msr.hi = 0x18000108;
- msr.lo =
- (6<<28) | // cas_lat
- (10<<24)| // ref2act
- (7<<20)| // act2pre
- (3<<16)| // pre2act
- (3<<12)| // act2cmd
- (2<<8)| // act2act
- (2<<6)| // dplwr
- (2<<4)| // dplrd
- (3); // dal
- /* the msr value reported by quanta is very, very different.
- * we will go with that value for now.
- */
- msr.lo = 0x286332a3;
-
- wrmsr(0x20000019, msr);
-
-}
-
-#include "northbridge/amd/gx2/raminit.c"
-#include "lib/generic_sdram.c"
-
-#define PLLMSRhi 0x00001490
-#define PLLMSRlo 0x02000030
-#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
-#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
-#include "northbridge/amd/gx2/pll_reset.c"
-#include "cpu/amd/model_gx2/cpureginit.c"
-#include "cpu/amd/model_gx2/syspreinit.c"
-#include "cpu/amd/model_lx/msrinit.c"
-
-static void gpio_init(void)
-{
- unsigned long m;
-
- /* Make sure events enable for gpio 12 is off */
-
- m = inl(GPIOL_EVENTS_ENABLE);
- m &= ~GPIOL_12_SET;
- m |= GPIOL_12_CLEAR;
- outl(m, GPIOL_EVENTS_ENABLE);
-}
-
-void main(unsigned long bist)
-{
- static const struct mem_controller memctrl [] = {
- {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
- };
-
- SystemPreInit();
- msr_init();
-
- cs5536_early_setup();
-
- /* NOTE: must do this AFTER the early_setup!
- * it is counting on some early MSR setup
- * for cs5536
- */
- cs5536_setup_onchipuart(1);
- gpio_init();
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- pll_reset();
-
- cpuRegInit();
- print_err("done cpuRegInit\n");
-
- sdram_initialize(1, memctrl);
-
- /* Check all of memory */
- //ram_check(0x00000000, 640*1024);
-}
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 18:43:32 +0000