diff options
Diffstat (limited to 'src/mainboard/olpc/rev_a/romstage.c')
-rw-r--r-- | src/mainboard/olpc/rev_a/romstage.c | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/src/mainboard/olpc/rev_a/romstage.c b/src/mainboard/olpc/rev_a/romstage.c deleted file mode 100644 index 7f8779f720..0000000000 --- a/src/mainboard/olpc/rev_a/romstage.c +++ /dev/null @@ -1,182 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "lib/ramtest.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/gx2def.h> -#include <cpu/amd/geode_post_code.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -#include "southbridge/amd/cs5536/cs5536_early_smbus.c" -#include "southbridge/amd/cs5536/cs5536_early_setup.c" - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/gx2/raminit.h" - -static inline unsigned int fls(unsigned int x) -{ - int r; - - __asm__("bsfl %1,%0\n\t" - "jnz 1f\n\t" - "movl $32,%0\n" - "1:" : "=r" (r) : "g" (x)); - return r; -} - -/* sdram parameters for OLPC: - row address = 13 - col address = 9 - banks = 4 - dimm0size=128MB - d0_MB=1 (module banks) - d0_cb=4 (component banks) - do_psz=4KB (page size) - Trc=10 (clocks) (ref2act) - Tras=7 (act2pre) - Trcd=3 (act2cmd) - Trp=3 (pre2act) - Trrd=2 (act2act) - Tref=17.8ms - */ -static void sdram_set_spd_registers(const struct mem_controller *ctrl) -{ - /* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) * - * component Banks (byte 17) * module banks, side (byte 5) * - * width in bits (byte 6,7) - * = Density per side (byte 31) * number of sides (byte 5) */ - /* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */ - msr_t msr; - unsigned char module_banks, val; - - msr = rdmsr(MC_CF07_DATA); - - /* get module banks (sides) per dimm, SPD byte 5 */ - module_banks = 1; - module_banks >>= 1; - msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT); - msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT); - - /* get component banks per module bank, SPD byte 17 */ - val = 4; - val >>= 2; - msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT); - msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT); - - /* get the module bank density, SPD byte 31 */ - /* this is multiples of 8 MB */ - /* actually it is 2^x*4, where x is the value you put in */ - /* for OLPC, set default size */ - /* dimm size - hardcoded 128Mb */ - val = 5; - msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT); - msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT); - - /* page size = 2^col address */ - val = 2; /* 4096 bytes */ - msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT); - msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT); - - print_debug("computed msr.hi "); - print_debug_hex32(msr.hi); - print_debug("\n"); - - /* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */ - /* well, it may be close. It's about 200,000 ticks */ - msr.lo = 0x00003000; - wrmsr(MC_CF07_DATA, msr); - - /* timing and mode ... */ - - msr = rdmsr(0x20000019); - - /* per standard bios settings */ - - msr.hi = 0x18000108; - msr.lo = - (6<<28) | // cas_lat - (10<<24)| // ref2act - (7<<20)| // act2pre - (3<<16)| // pre2act - (3<<12)| // act2cmd - (2<<8)| // act2act - (2<<6)| // dplwr - (2<<4)| // dplrd - (3); // dal - /* the msr value reported by quanta is very, very different. - * we will go with that value for now. - */ - msr.lo = 0x286332a3; - - wrmsr(0x20000019, msr); - -} - -#include "northbridge/amd/gx2/raminit.c" -#include "lib/generic_sdram.c" - -#define PLLMSRhi 0x00001490 -#define PLLMSRlo 0x02000030 -#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24)) -#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0)) -#include "northbridge/amd/gx2/pll_reset.c" -#include "cpu/amd/model_gx2/cpureginit.c" -#include "cpu/amd/model_gx2/syspreinit.c" -#include "cpu/amd/model_lx/msrinit.c" - -static void gpio_init(void) -{ - unsigned long m; - - /* Make sure events enable for gpio 12 is off */ - - m = inl(GPIOL_EVENTS_ENABLE); - m &= ~GPIOL_12_SET; - m |= GPIOL_12_CLEAR; - outl(m, GPIOL_EVENTS_ENABLE); -} - -void main(unsigned long bist) -{ - static const struct mem_controller memctrl [] = { - {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* NOTE: must do this AFTER the early_setup! - * it is counting on some early MSR setup - * for cs5536 - */ - cs5536_setup_onchipuart(1); - gpio_init(); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(); - print_err("done cpuRegInit\n"); - - sdram_initialize(1, memctrl); - - /* Check all of memory */ - //ram_check(0x00000000, 640*1024); -} - |