Age | Commit message (Collapse) | Author |
|
Enable Dynamic DPTC support.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I957511c44278a7cffb7cb5d7e099eb13232b6a1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
DTTS indicated Dynamic Thermal Table Switching.The proposal would like
to develop the schematic for switching 6 thermal table by lid status,
machine body mode and temperature. After entering the OS, the thermal
table would be table A. If the “Motion” or “Lid status change” is
detected. The thermal table would switch to laptop mode or lid close
mode.
Once the higher environment temperatures are detected,the thermal
table would switch to the corresponding power throttle table (B, D or
F). Based on these table switching mechanisms, no matter how the
end-user uses Chromebook,they could enjoy more humanized thermal
designs.
Release Over Over Release .
Temp. Temp. Temp. Temp. .
-------------------------------------------------------- .
Desktop mode Table A Table B 50C 45C .
Lid open (Default) .
-------------------------------------------------------- .
Desktop mode Table C Table D 55C 50C .
Lid close .
-------------------------------------------------------- .
Laptop mode Table E Table F 45C 40C .
-------------------------------------------------------- .
On the proposal, the transmission rules are list below:
1. Table A is the default table after booting.
2. A, C, E (Release Temp) can switch to each other.
3. B, D, F (Over Temp) can switch to each other.
4. A and B, C and D, E and F can switch to each other.
5. If Lid open/close or mode switch event trigger, temperature release
tables will translation to each other, temperature over tables will
translation to each other.After that event trigger, EC will check the
new temperature condition and decide if the temperature need to be
trigger.For example, if table A will switch to table D, table A will
switch to C with Lid close event, if temperature is over 55C, EC will
trigger temperature to switch form table C to D.
6. EC will trigger 3 times body-detection events during power on boot
without any body-mode and lid status change. For this case if the
previous table label is on same group, we will based on the temperature
to decide the table.
For example, assume table A is current table. When the temperature
reaches 50C, than the table is switched from A to B. The current table
is B. When the temperature is downgrade below 45C, the table is
switched form B to A. The same rule is for C and D, E and F.
BRANCH=none
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I866e5e497e2936984e713029b5f0b6d54cbc9622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Enable STT and set 6 thermal table profiles for Dynamic Thermal Table
Switching Proposal support.
BUG=b:232946420
BRANCH=none
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ie0740cb5bb16cd53c2ee6937e32a974346012823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Include <amdblocks/gpio_defs.h> instead of "gpio_defs.h", since
gpio_defs.h is not only visible in a local scope, but also as
<amdblocks/gpio_defs.h>.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iab3e5bb235a5b1bc995b6cf8710f0d8c1886142d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70432
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch generates the following for the mainboard:
Scope (\_SB)
{
Method (MPTS, 1, Serialized)
{
Local0 = \_SB.PCI0.RP06.RTD3._STA ()
If ((Local0 == One))
{
\_SB.PCI0.RP06.PXSX.DPTS (Arg0)
}
}
}
Change-Id: I27ade63cfe0586aee9f03ba816b2590f14dcb610
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70229
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds SLP_S0 residency registers and enable LPIT support.
Added `SLP_S0_RES` in Meteor Lake pmc.c as per MTL EDS document.
TEST=Able to see LPIT Table after booting Google/Rex to ChromeOS.
localhost /home # ls -lt /sys/firmware/acpi/tables/
-r--------. 1 root root 254 Dec 5 06:59 APIC
-r--------. 1 root root 84 Dec 5 06:59 DBG2
-r--------. 1 root root 21819 Dec 5 06:59 DSDT
-r--------. 1 root root 276 Dec 5 06:59 FACP
-r--------. 1 root root 64 Dec 5 06:59 FACS
-r--------. 1 root root 56 Dec 5 06:59 HPET
-r--------. 1 root root 148 Dec 5 06:59 LPIT
-r--------. 1 root root 60 Dec 5 06:59 MCFG
-r--------. 1 root root 21078 Dec 5 06:59 SSDT
-r--------. 1 root root 76 Dec 5 06:59 TPM2
Change-Id: Id2d16d8514ce4b7867c9395617ad3ac73b1b9989
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70351
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements SoC overrides to set CPU privilege level for
Meteor Lake SoC.
Change-Id: I33794f51e57dd8e0ffe61dfd2f91c6ef3f9187c9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70352
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds missing ASL entry for GSPI2 device.
Change-Id: I8f8410947b77d1a9bab2fa5929f30c803a78266d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70354
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids the need to hardcode the IOAPIC ID.
Change-Id: I0965b511e71c58f1c31433bc54595a5fabb1c206
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70268
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Some of these macros are too generic like "NONE" and create conflicts in
other compilation units.
Change-Id: I6131a576f115df20df4d3df712d4c3f59c6dceb7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70429
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
option STORAGE_EMMC 0
option STORAGE_NVME 1
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Idd52112743ee0d64aca630e54511503607770d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
LARS has two variants, LARS and LILI, which are differentiated via
the customization_id field in the VPD. To make differentiation easier
outside of ChromeOS (ie, for Windows/Linux drivers), set the SKU ID
based on VPD so it can be easily read via SMBIOS.
Modeled after similar code in google/reef (snappy variant).
TEST=build/boot lili variant, verify sku1 populated in SMBIOS tables.
Change-Id: I148462b6f86b25fa8db26ea6e1537d1a5e47984b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=IVRS table doesn't change on amd/mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5be04bc91425480992fcad12f8720738f9ca490e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70357
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I74f943e9b616458a16aa13c29706cf1551fcbbb2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There are four requirements for the SMI to hit a printk()
this commit now removes.
Build must have DEBUG_SMI=y, otherwise any printk() is a no-op
inside SMM.
ASL must have a TRAP() with argument 0x99 or 0x32 for SMIF value.
Platform needs to have IO Trap #3 enabled at IO 0x800.
The SMI monitor must call io_trap_handler for IO Trap #3.
At the moment, only getac/p470 would meet the above criteria
with TRAP(0x32) in its DSDT _INI method. The ASL ignores any
return value of TRAP() calls made.
A mainboard IO trap handler should have precedence over
a southbridge IO trap handler. At the moment we seem to have
no cases of the latter to support, so remove the latter.
Change-Id: I3a3298c8d9814db8464fbf7444c6e0e6ac6ac008
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I4819909cf9460ca550af38ca73a50220b77a385f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Avoid calling a function named mainboard_io_trap_handler() when
the dock (dis)connect is not triggered from IO trap.
Change-Id: Idc258a390f2de2c32d38a0e35fcce896d058d1b9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Shift is done in multiples of 8 (1 << 3) bits.
It was fixed already for i82801ix/jx.
Change-Id: I5e1c2b3bf4ba68f34eb43e59fe783d5cd6e0a39a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CONFIG_VBOOT_CBFS_INTEGRATION images are signed differently than normal
images. futility needs to be able to tell this difference, and it parses
the `config` file included in CBFS to do this. This change codifies that
dependency in Kconfig so that nobody can accidentally break this by
turning off config file inclusion.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2b2d245b850bc65abb4e72f20b4e360312c828f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70157
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At the moment IO trap is not implemented for AMD platforms.
Change-Id: Ib62ac4e4e418a8bab80c30dfb5183ecd8beb998d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Properly handle meminfo DIMMs with `dimm_size` of 0, which represent
empty slots. This allows platform code to create dummy meminfo DIMMs
so that SMBIOS tables have type 17 entries for empty DIMM slots.
Change-Id: I17ae83edf94483bd2eeef5524ff82721c196b8ba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64035
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently the MRC cache is updated in romstage, immediately after
returning from FSP-M. Since cbmem is not cached in romstage, the update
is slow (~6 ms on nissa). Specifically, the new MRC data returned by the
FSP is stored in the FSP reserved memory in cbmem, so hashing the new
data is slow.
Move the MRC cache update to ramstage, where cbmem is cached. On nissa,
this saves ~5 ms of boot time.
Before:
552:finished loading ChromeOS VPD (RW) 631,667 (16)
3:after RAM initialization 637,703 (6,036)
4:end of romstage 650,307 (12,603)
After:
552:finished loading ChromeOS VPD (RW) 631,832 (15)
3:after RAM initialization 633,002 (1,169)
4:end of romstage 645,582 (12,580)
In ramstage, save_mrc_data() takes ~138 us.
BUG=b:242667207
TEST=MRC caching still works as expected on nivviks - after clearing the
MRC cache, memory is retrained on the next boot, but cached data is used
on subsequent boots.
Change-Id: Ie6aa2dee83a3ab8913830746593935d36a034b8d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I83d05ce0b26b01fdfc95d1442a4c930ed77bf25c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
While on it, sort includes.
Change-Id: Iacc858fbad89b54b1f5891c18cd3043b3963d53f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic8621a18a1b3c299c3d6eb7b4bff39f1ff7d8492
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ie2b1131d7db4b81bd6eb2df7a5ba8a6e8b54539b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ibbefa3d57b17a6a8eb0831eeadf6d629e2765567
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ia974da56090b8f9de03c29cda62bc1fb9ef3a082
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I78337cf822cfae177b9ef3040641057a84e90e15
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I3bbb2f02a2dc182956deffc554a6b161a93ad963
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ia79816ccc230d17dd1ce2bde7a185b4d502ad107
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Two GPIOs were set as SCI, but are not GEvent capable pins on morgana.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I00dc1b2595c047ce6898b394061d119ac8680755
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Modify the configuration of GPIO_74 (PMIC Thermal Trip Point) as
in it's current configuration, it stops the laptop entering S5.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0e31f095ff42a03e3ea1496fe67d69b0f1763a3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This reads back the ioapic id from hardware.
Change-Id: I214557bbe963d1086f35f96efb1cb47950099eb3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70267
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is more robust than hardcoding whathever FSP has set up and is a
lot less code.
Change-Id: I6423ddc139d742879d791b054ea082768749c0a7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70265
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure mayan GPIOs per schematic 105-D59700-00A Rev 1.00
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I283afc716487fd8fa6d455194c382d87a3e6860b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
DmaProperty must only be present on endpoint devices.
BUG=b:259716145
TEST=TBD
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic5be85c3d13250646867f8c8f5950796ec339551
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Function definitions without a type a deprecated in all versions of C.
Change-Id: I2efb42e653b0deb56ba6b0c9789764a9cabc552e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70138
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia56f813933143ef69c97f1b7643693c6eade6abe
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add retry up to 10 seconds maximal in ipmi_get_device_id.
Without this retry, on OCP Craterlake with BMC version v2022.28.1,
there's a chance that ipmi_get_device_id failed then ipmi device
won't be enabled.
Change-Id: I2b972c905fb0f8223570212432a4a10bd715f3f7
Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
SOC_INTEL_CSE_SEND_EOP_EARLY breaks soft ME disable, which works using
a HECI message that needs to be sent before EOP. Make the option
configurable to allow soft ME disable on alderlake.
Change-Id: I7febf7c029e7eac94052cc3a8142949d6813c1bc
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This replaces the mechanism with --ext-win-base --ext-win-size with a
more generic mechanism where cbfstool can be provided with an arbitrary
memory map.
This will be useful for AMD platforms with flash sizes larger than 16M
where only the lower 16M half gets memory mapped below 4G. Also on Intel
system the IFD allows for a memory map where the "top of flash" !=
"below 4G". This is for instance the case by default on Intel APL.
TEST: google/brya build for chromeos which used --ext-win-base remains
the same after this change with BUILD_TIMELESS=1.
Change-Id: I38ab4c369704497f711e14ecda3ff3a8cdc0d089
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I0984ff1d0b1908bfb7028910f2c6f1083e153520
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch creates initial common code structure for board_id
implementation for intel rvp platforms. Board_id helps in
identifying the platform with respect to CHROME_EC and INTEL_EC
(Windows_EC). Changes include
1. Create initial board_id.c and board_id.h
2. Modify the Makefile to include src/ec/intel directory
BUG=b:260654043
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches in the train
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: If133f6a72b8c3e1d8811a11f91e4556beb8c16e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The headers added are generated as per FSP v3361.12
BUG=b:261159242
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.corp-partner.google.com>
Change-Id: Id7986017e1256627027a45325238bf29e0c00cc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Do not hide UARTs in ACPI mode from the OS, as this prevents using them
on at least Windows. Currently, the driver is only used on the Prodrive
Hermes mainboard.
Change-Id: I01bdccff1b11e1862970c924fd5fc7718a2d6ce9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70155
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function was never called from outside of drivers and
src/drivers/pc80/tpm/tis.c was the only one doing it in a questionable
way.
tpm_vendor_cleanup() also isn't needed as one of tis_close() functions
was its only caller.
Change-Id: I9df76adfc21fca9fa1d1af7c40635ec0684ceb0f
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The `HyperThreading` FSP UPD is set according to the `hyper_threading`
CMOS option using the value of the `FSP_HYPERTHREADING` Kconfig option
as fallback in case options are disabled or otherwise unavailable. The
`HyperThreadingDisable` devicetree setting isn't used by any mainboard
but it overwrites the value of the FSP UPD. Remove it so that the CMOS
and Kconfig options work as intended.
Change-Id: Iea60b89f6f970eb9aee8c7bec026ab5c2df30205
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69534
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update SRAT table revision to 3 according to ACPI spec.
Add CEDT table revision according to CXL spec.
Change-Id: Iecc3a9892b0f8093013b2a426749e2ec5c00803b
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Change the EC FW CBFS filename prefix to a more accurate "ec/"
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic789df11160e3ffe7b7294b11e1fa80e3c3961ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70206
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable SOC_AMD_COMMON_BLOCK_ACPI_DPTC for Morthal boards, to enable
support for the low/no battery boot feature.
BUG=b:217911928
TEST=build_packages --board=skyrim chromeos-bootimage --autosetgov
Change-Id: I3eb6bee6601e34420a90f33f8f2c45cf3fe37f9b
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70216
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:259716145
TEST=Verified SSDT on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib57dea9b16e4590ca2d75ac1512fdaf773ec50f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70065
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fixing documentation of PAD_INT macro and replacing spaces with a tab to
match the rest of the documentation.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I72a2578ce21dd10b3beb65c706440c3379f216d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70281
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:259716145
TEST=Verified SSDT on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5bb432dd4e8f320d2c0d7f378dc2d7b3a770b541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70063
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ELOG_CROS_DIAG_RESULT_* codes should be consistent with the enum
definition of enumerated histograms.
Hence add comments based on the requirements of enum histograms in
histogram guidelines.
BUG=b:4047421
TEST=none
Change-Id: I1a1a7c863d5aa9496649f81dc94fd79a6ad482df
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70145
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I20c3298a920396718f0dc036e57faf8e46b82b2c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70253
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib4a0d77e7bb4cb52e91a5965cae0a6c7ddc40090
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70254
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RTD3 support for adlrvp_p_ext_ec and adlrvp_rpl_ext_ec
BUG=none
BRANCH=firmware-brya-14505.B
TEST=Insert a SD card or NIC AIC on PCIe slot1 and run
'suspend_stress_test -c 1'. The RP8 should not cause suspend issue.
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: Ieb7d207a7ec3763bad3e82522e86a825c1ed00b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70119
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
|
|
Add the RPL CPU power limits to kano and zydron's power limit table.
BUG=b:261127266
BRANCH=brya
TEST="emerge-brya coreboot chromeos-bootimage", flash zydron with
image-zydron.serial.bin and verify zydron boots successfully to kernel.
Change-Id: I369c5d7a9a3db0c3e7184a23b0f159ed715b5a50
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70238
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We need to add DSI and MIPI_TX settings to support MIPI panel.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: Ib430939b4fa2d517d006b4c23d399754ef4583ff
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70184
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DSI CMDQ offset of MT8186 is different from previous SoCs.
Therefore, we define two versions for DSI register header files. The v1
is for MT8173/MT8183/MT8192 and the v2 is for MT8186/MT8188.
BUG=b:244208960
TEST=build pass
BRANCH=corsola
Change-Id: I3d13ca03b72554ab7be2b194db32a4f961f38dad
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70183
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For geralt project, we also support MIPI panel as our firmware display.
So add this patch to configure ddp to choose eDP display or MIPI panel
display.
BUG=b:244208960
TEST=test firmware display pass for both eDP and MIPI panel on MT8188
EVB.
Change-Id: I06f38b1889811274588c26e9284da4d502acf38b
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70181
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is added at runtime.
Change-Id: Ife2865f91e3d046bc66e423b2054f56176f57fc6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69300
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is added at runtime.
Change-Id: I1f684c800de6711d8b0a0aea0d59c8e21d22c14a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69299
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is added at runtime.
Change-Id: I7716f8a972e2280179aa6aee00488b22413c0c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69298
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
C5, C6 and slfm depend on the southbridge and the northbridge to be able
to provide this functionality, with some just lacking the possibility to
do so. Move the devicetree configuration to the southbridge.
This removes the need for a magic lapic in the devicetree.
Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Zork boards will not boot without PSP verstage/VBOOT, so select it
by default.
Change-Id: I2447bf69baefd5560a0153dcd3d9b87b0a91a3f9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69763
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will avoid clearing the other bits in fifo_status.
Change-Id: I7917b3f8d9af6056ed872b7e48cef9c3deba5119
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The patch adds timestamp around cse_fw_sync().
BUG=none
TEST=Verified on rex, cbmem -t:
948:starting CSE firmware sync 1,340,551 (50,657)
949:finished CSE firmware sync 1,379,348 (38,797)
Port of 'commit b647e35119c1 ("soc/intel/alderlake: Add timestamp
for cse_fw_sync")'
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I6cfbf84018e312fbf9482f0fba05b444603cd4b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70172
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds PCIe based SD controller at RP 7 (from RP 11) with
Proto 1 schematics dated 11/30.
Additionally, added the RTD3 entries for the SD controller.
Finally, ensured that EN_PP3300_SD (GPP_D03) is configured in
bootblock and SD_PERST_L (GPP_D02) is configured in romstage to
meet the power cycle requirement.
BUG=b:242917011
TEST=Able to build and boot Google/Rex. SD card detection is due
for the Proto 1 hardware.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23d53e4d61ec36d2145f9e5816d97d13eb5b219e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch drops the usage of reading `board_id()` while performing
the GPIO configuration.
The reason to drop the board_id check is to ensure that GPIO
configuration for MLB (mainboard) would remain the same and the only
GPIO PIN configuration that differs would be due to usage of having
different DBs (daughter board) which will be taken care using
CBI (and fw_config.c file) in coreboot.
Additionally, drop unused early GPIO default configuration table.
BUG=b:260804656
TEST=Able to perform the GPIO configuration and able to boot
Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I96cafd1c904001cbf4199977e9e721afe5eab470
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Enable this feature, and it can use the probe statement in devicetree
to cache of fw_config field as oem string.
TEST=With CBI FW_CONFIG field set to 0x1561
localhost ~ # dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: AUDIO-MAX98357_ALC5682I_I2S
String 2: CELLULAR-CELLULAR_PCIE
String 3: UFC-UFC_MIPI
String 4: WFC-WFC_MIPI
String 5: DB_SD-SD_GL9755S
Change-Id: I6cb35eb9c0fbe32764ca76bb7a929cc92fc38404
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70228
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
NVMe is determined by a logical bit 1, not the physical SKU pin.
Thus, (logical) sku_id & 0x2 == 0x2 would mean that the device has
NVMe enabled on it. Previously, I thought that it was tied to a
physical pin, but this is not correct.
BUG=b:254281839
BRANCH=None
TEST=flash and boot on villager and make sure that NVMe is not
initialized in coreboot.
Change-Id: Iaa75d2418d6a2351d874842e8678bd6ad3c92526
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70230
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch gets the cpu and pch's tracehub mode from the debug area
of the Descriptor Region and updates the respective UPDs.
TEST=Build, verify the tracehub mode values.
Update CPU' and PCH's Trace Hub modes:
img=coreboot.rom
printf '\x01' | dd of=$img bs=1 seek=3841 count=1 conv=notrunc
printf '\x01' | dd of=$img bs=1 seek=3842 count=1 conv=notrunc
Check coreboot logs:
[DEBUG] rt_debug: CPU TraceHub Mode: 1 PCH Tracehub Mode: 1
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I088b5d1f5569aacbf79834b44372702f8d3a189f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Change-Id: Ied55add6d7549f165d8b97032d7f21ede0ce2dde
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Fixes using USB-C devices in either orientation on left-side USB-C
port.
Test: Plug USB-C device in both orientations on left-side USB-C port,
check speed with lsusb -t.
Change-Id: I9fbc53bb51a5225e92b0b6bb9ced87a0ab90c9ce
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69702
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The devices in the list that was introduced in commit c66ea985776
("soc/intel/alderlake: provide a list of D-states to enter
LPM") are all internal. This CL skips the external buses (which caused
the addition of packages to non-existant paths such as
"_SB.PCI0.RP1.MCHC", and warnings from the kernel)
BUG=b:231582182
TEST=Built and tested on anahera by verifying SSDT contents
Change-Id: I3785b2b2af85d96e2e1296b6cfdefcd72080b5fe
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70163
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add WiFi SAR table for zydron.
BUG=b:260770999
TEST=build FW and checked SAR table can load by WiFi driver.
Change-Id: I8d5f966c7af3ac6d9923d4f6c851bfb340f31fab
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Per Intel doc 621483, 26.1.1 - NMI_STS_CNT, 8254 timer is required
for Speaker Data output (buzzer) at GPP_B14 NF1, as it is using
8254 timer counter 2 output. However when 8254 timer is used, S0ix
will not work as 8254 has to be gated instead. For further info on
s0ix requirements, refer to Intel doc 610002 (Modern Standby Unified
Checklist).
This CL also disables s0ix because it is not required by the
platform.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Ib5e7787a47509ed09818d8515d21a80196fb1ec6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67553
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update VBT configurations for DP++ and DP dongles support.
Tested working on customer's side.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I7aa34297a10bf16b9043140bff91fd3a8c4009d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70154
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors the `pmc_lockdown_cfg()` to remove the helper
functions and uses the `setbits32` function to enforce bit locking
as applicable.
This patch also locks PMC features like:
1. Debug mode configuration and host read access to PMC XRAM.
2. PMC soft strap message interface.
3. PMC static function.
and then calls into the PMC IPC function that informs about PCI
enumeration.
Port of -
1. commit 2eec87a553ec ("soc/intel/alderlake: Refactor
`pmc_lockdown_cfg` function")
2. commit bae4a0b5a1e4 ("soc/intel/alderlake: Implement PMC
feature lock")
3. commit c2570dc99800 ("soc/intel/alderlake: Implement PMC
soft strap interface lock")
4. commit f021952c4067 ("soc/intel/alderlake: Implement PMC
static function lock")
5. commit 457891415380 ("soc/intel/alderlake: Call into PMC
IPC to inform PCI enumeration done")
BUG=none
TEST=Boot to OS on google/rex.
Register values in OS -
# busybox devmem 0xfe0018d4 32 #bit31
0x80000000
# busybox devmem 0xfe001024 32 #bit21,18,17,4
0x00362610
# busybox devmem 0xfe001818 32 #bit27,22
0x2B4F0004
# busybox devmem 0xfe00104c 32 #bit0
0x00000001
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3622748d8fecef69c60bb3fe9bfe68fc126764b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70132
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5f11bde99dfcde81c9dc62c1102330c0a6c16e04
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'gpu_lvds_use_spread_spectrum_clock'is only used on i945.
Change-Id: I0f63f18d3f57ef8774f22ca9eb8c20dd39c56cdc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70147
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia71692ecf74fd8921eeafabac9a4cb862da90e81
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70114
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
"use_crt" and "use_lvds" are boolean, so use "true/false".
Change-Id: I5b5b42c27351331ad40fbe92fb87390cb1284aa9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70148
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After changing EC detection of S0ix from CPU_C10_GATE# to SLP_S0# in
system76/ec@cc3effb6a451 ("board/system76/common: use SLP_S0# pin for
modern standby detection"), DevSlp blocks suspend entry. Disable it
until it is fixed.
Change-Id: I586245ebf9f9d5ad08f6745a450411f194a661da
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Galago Pro 6 (galp6) is an Alder Lake-P board.
Tested with a custom edk2 UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots (with NMSO480E82-3200EA00)
- M.2 NVMe SSD (with MZVL2500HCJQ)
- All USB ports
- All USB ports
- SD card reader
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Backlight controls on Windows 10 and Linux 6.1
- HDMI output
- DisplayPort output over USB-C
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.0.6
- Internal flashing with flashrom v1.2-1087-gde016a17
Not working:
- Detection of devices in TBT slot on boot
Change-Id: I8940fb3777d7f18393ef50baec32f9445b375648
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Change-Id: I13777cf6f663ca8c52a059a60cfcdfe6ecc5b9ae
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Piglin & Hoglin boards were built with a couple of different sizes
of ROM chips. Despite this, the desire was to use just a single FMD
file. The different sizes are already accounted for in Kconfig, so
add the Kconfig size here to be used.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ia75725b0c4d61e832c94160fa4cd455e89c60274
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch selects SOC_INTEL_CSE_SEND_EOP_LATE config to let IA
common code to skip sending CSE EOP cmd during finalize operation
rather uses boot state machine (either payload load or payload boot)
to delay in sending EOP cmd to CSE.
BUG=b:260041679
TEST=Able to boot to Google/Rex with this patch and observed ~150ms
savings in boot time
Without this patch:
942:before sending EOP to ME 1,795,702 (354)
943:after sending EOP to ME 1,950,526 (154,824)
With this patch:
942:before sending EOP to ME 2,051,406 (35,484)
943:after sending EOP to ME 2,057,583 (6,177)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7d44d5eff890ac78e3075d49cc249f740686dd0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69999
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch allows to send late EOP cmd to CSE (after CSE .final)
using boot state machine (either BS_PAYLOAD_BOOT or BS_PAYLOAD_LOAD)
if the SoC user selects SOC_INTEL_CSE_SEND_EOP_LATE config.
Rename `set_cse_end_of_post()` to `send_cse_eop_with_late_finalize()`
to make the function name more meaningful with its operation.
BUG=b:260041679
TEST=Able to boot Google/Rex after sending CSE EOP late.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If4c4564befcd38732368b21f1ca3e24b68c30e0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch creates an API that can perform essential CSE operation
after sending the late EOP command to the CSE and prior booting to OS.
Lists of operation are
- Perform global reset lock
- Put HECI1 to D0i3 and disable the HECI1 if the user selects
- Set D0I3 for all HECI devices.
BUG=b:260041679
TEST=Able to boot Google/Rex after sending CSE EOP late.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I10131ea9b553a62f0d632783c4dbad96d35d6563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69977
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors common code to allow cse_final() function to send
EOP cmd if the SoC user selects `SOC_INTEL_CSE_SET_EOP` kconfig.
This patch helps cse_final_ready_to_boot() and
cse_final_end_of_firmware() function for being meaningful with its
operation and let cse_final() being that outer layer to perform three
operations based on the selected kconfig.
1. send cse eop command
2. perform cse_final_ready_to_boot() operations
3. perform cse_final_end_of_firmware() operations
Additionally, ensures the platform that choose to send EOP late
(like JSL and TGL) is not being impacted due to this code refactoring
hence, skip calling into CSE.final if SoC selects
`SOC_INTEL_CSE_SEND_EOP_LATE` config.
BUG=b:260041679
TEST=Able to send EOP command successfully for Google/Taeko.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I412291c9378011509d3825f9b01e81bfced53303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69975
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Presently, coreboot supports two instances of sending EOP cmd to
the Intel CSE.
1. Sending EOP cmd to CSE during `.final` operation from cse pci driver.
2. Starting with Alder Lake, the recommendation was to send EOP to CSE
earlier than CSE `.final` operation. Since then it's referred to as
`Sending EOP Early`. This method helped to save the CSE EOP
response time significantly.
During Meteor Lake platform, CSE EOP response time has become
non-deterministic and we have figured that sending EOP command later
than CSE .final operation is actually helping to optimize the boot time
significantly (around ~150ms savings compared to sending from `.final`
ops and ~5sec compared to sending CSE early).
Hence, this patch intended to create yet another kconfig for sending
CSE late (specifically after `.final` operation). The idea for this
newer config is to use the boot state machine for sending CSE EOP cmd.
The patch train in this series would add the specific changes to allow
sending EOP late and perform other essential operations required prior
booting to OS as coreboot decided to skip calling into FSP Notify phase.
Starting with Jasper Lake, coreboot sends EOP before loading payload
hence, this config is applicable for those platforms.
The current plan is that Intel Jasper Lake, Tiger Lake and Meteor Lake
platform will select this newer config from SoC code.
BUG=b:260041679
TEST=Able to send EOP command successfully for Google/Taeko.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iea512cd5b79d61dd5d5a962079baf525027c831f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69976
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust scl_lcnt, scl_hcnt, sda_hold value for I2C5 to meet
touchpad SPEC.
BUG=b:260540852
BRANCH=firmware-brya-14505.B
TEST=build, checked TP function work normally,
and measure the timing meet SPEC
tLOW ~1.72 us
tHIGH ~0.63 us
tHD ~0.69 us
fscl 383 kHz
Change-Id: I9036a604a90558911c4f8a492db9f1f0f28bf404
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Fine-tune eMMC DLL based on Xivu EVT system.
BUG=b:256538132
TEST=executed 3000 cycles of cold boot successfully
Change-Id: Iaa8338fd0faa0e01f42ee77dea135c7a241ed3be
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69892
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DPTC support for frostflow.
BUG=b:257187831
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Iac7b8789a5189827fe98cb06328d666300841a5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69931
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust asserts to allow to store and compare (at S3 resume) hashes
without padding to maximum hash length / slot size.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: If6d46e0b58dbca86af56221b7ff2606ab2d1799a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Compilers are not optimizing-out code correctly. This patch fixes
incorrect behavior by splitting if statement and extracting code to
another function, this allowing for better code size optimization and
reduction of undefined references.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ia5330efeeb4cfd7477cf8f7f64c6abed68281e30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69761
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Refer to brask board to add audio settings for gaelin.
BUG=b:253177160
BRANCH=firmware-brya-14505.B
TEST=Able to verify audio playback on gaelin with kernel v5.10.
Change-Id: Ibc8cacce6cb4b3e55fc7332bb9eb9ac20848fc5b
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|