| Age | Commit message (Collapse) | Author |
|---|
|
At this moment, Vilboz board version is 1 and it
according to v3+ schematics, however WiFi power enable
is active high. This change sets
VARIANT_MIN_BOARD_ID_V3_SCHEMATICS for Vilboz as 1
and VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW as 2.
BUG=b:160547115
BRANCH=None
TEST=flash the bios to vilboz DUT and test WIFI module
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I9699bb839a801ab7d14c38b971ec28e3a322a997
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Two usb Type-C ports under the actual mux device. Each port has its own
ACPI device entry. These nodes are the ones that the USB Type-C
port/connector device will refer to in order to configure the mux.
TEST=Verified the scope of PMC.MUX CONx in the SSDT on Tigerlake RVP
board.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I7210e00cebe16a5fb8417ac23abad98e574e0982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42953
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Windows definition
There was a review comment for Chromium Linux ov2740 driver that
Windows driver already set the HID as INT3474 and suggested to have
the same value for Chrome.
The upstreamed Linux driver code has INT3474 as HID and this patch is
to set the same HID in ACPI configuration.
https://patchwork.kernel.org/patch/11540753/
BUG=b:160334865
BRANCH=none
TEST=User-facing camera should work with the driver which set the HID
as INT3474
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I10e98d32899f31d91c1cc7ddfa099af73d8aef37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43006
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Volteer world-facing camera has a privacy LED and it is supposed
to be turned on only when the camera is being used. But the LED
is always on and this is to fix the issue.
RCAM_SNR_PWR_EN (RearCAMera_SeNsoR_PoWeR_ENable) GPIO, which
controls the world-facing camera LED, was not in the power-up
and power-down sequence definitions and this caused the issue.
BUG=b:160341981
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check the world-facing camera LED is only turned on only when
the camera is working.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I564690baffddfdd0f998525992643aaf16ba4b02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42985
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
\_SB.DPTF.IDSP adverties to the DPTF daemon which policies the
implementation supports. Added a new acpigen function to figure out
which policies are used, and fills out IDSP appropriately.
Change-Id: Idf67a23bf38de4481c02f98ffb27afb8ca2d1b7b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
DPTF has several options on how to control the fan (fine-grained speed
control, minimum speed change in percentage points, and whether or not
the DPTF device should notify the Fan if it detects low speed).
Individual TSRs can also set GTSH, which is the amount of hysteresis
inherent in the measurement, either from circuitry (if analog), or in
firmware (if digital).
BUG=b:143539650
TEST=compiles
Change-Id: I42d789d877da28c163e394d7de5fb1ff339264eb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds support for emitting the PPCC table, which describes
the ranges available as knobs for DPTF to tune. It can support min/max
power, min/max time window for averaging, and the minimum adjustment size
(granularity or step size) of each power limit. The current implementation
only supports PL1 and PL2.
BUG=b:143539650
TEST=compiles
Change-Id: I67e80d661ea5bb79980ef285eca40c9a4b0f1849
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds support for generating the _FPS table for the DPTF Fan
object. The table describes different levels of fan activity that may be
applied to the system in order to actively cool it. The information
includes fan speed at a (rough) percentage level, fan speed in RPM,
potential noise level in centibels, and power in mA.
BUG=b:143539650
TEST=compiles
Change-Id: I5591eb527f496d0c4c613352d2a87625d47d9273
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change generates the DPTF TCHG.PPSS table in the SSDT. This table
describes different charging rates which are available to use. DPTF
can pick different rates in order to passively cool (or not) the
system.
BUG=b:143539650
TEST=compiles
Change-Id: I6df6bfbac628fa4e4d313e38b8e6c53fce70a7f2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch adds support for DPTF Critical Policies, which are consist
of Method definitions only. They are `_CRT` and `_HOT`, which are
defined as temperature thresholds that, when exceeded, will execute a
graceful suspend or a graceful shutdown, respectively.
BUG=b:143539650
TEST=compiles
Change-Id: I711ecdcf17ae8f6e653f33069201da4515ace85e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch adds support for emitting the Thermal Relationship Table, as
well as _PSV Methods, which together form the basis for DPTF Passive
Policies.
BUG=b:143539650
TEST=compiles
Change-Id: I82e1c9022999b0a2a733aa6cd9c98a850e6f5408
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds support for generating the different pieces of DPTF
Active Policies. This includes the Active Relationship Table, in
addition to _ACx methods.
BUG=b:143539650
TEST=compiles
Change-Id: Iea0ccbd96f88d0f3a8f2c77a7d0f3a284e5ee463
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
In this DPTF implementation, the participant device objects are written
into the DSDT with only minimal Names attached (_HID/_ADR, _STA, _UID,
PTYP, and _STR). All other Methods & Names will be written into the
SSDT. If a device is not used in any policy, then its _STA is set to
return 0 ("off").
BUG=b:143539650
TEST=Compiles.
Change-Id: Ief69a57adce9ee0b19056ce6a11ed8a5b51b3f87
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
For both Tiger Lake and Jasper Lake, add the DEVFN for Image Processing
Unit (IPU) to soc_acpi_name, which is set to return "IPU0".
Change-Id: Ib11be5be7fbaec688d8788945a3bcab3f8d834a1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42878
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a minimal PCI driver for Intel's IPU, this allows devices to be
added underneath it in the devicetree.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I531b293634a5d40112dc6af7b33fedb5e13f35e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42812
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCI IDs for Intel's Image Processing Unit (IPU) for TGL & JSL
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I71dc95a6692e82ca25b0252b4f0789ee059df89f
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42811
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support function to parse entries in the devicetree to
generate PowerResource entries for the MIPI camera.
Change-Id: I31e198b50acf2c64035aff9cb054fbe3602dd83e
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41624
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support function to add STA function which returns an
external variable.
Change-Id: I31755a76ee985ee6059289ae194537d531270761
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42245
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to handle CIO2 device type.
Change-Id: I521740524bc1c4da3d8593f011a033542e4a872c
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42470
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to add PLD section to SSDT.
Change-Id: If65b9cbabca95e9645d8e5023ce7fd78b0625d1e
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42469
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to add DSM section to SSDT.
Change-Id: Ic60e972b6aebad171a7b77fe0d99781693adfb20
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42468
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to handle camera sensor.
Change-Id: I581c9bf9b87eac69e88ec11724c3b26ee5fa9431
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42467
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support in mipi_camera driver to handle NVM and VCM
device types.
Change-Id: I24cb7f010d89bc8d14e0b4c8fe693ba6e9c68941
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42466
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the mipi_camera driver to handle acpi_name based on
device_type, if acpi_name is not set in the devicetree and moves some of
the common code to separate methods.
Change-Id: I15979f345fb823df2560db269e902a1ea650b69e
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41607
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
update telemetry value for SDLE test result.
BUG=b:152922299,b:152369472
TEST=emerge-zork coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I14d218243931271ba15ec4113e9bc46c670fb2ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42999
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on schematic and gpio table of terrador, generate gpio settings
and overridetree.cb for terrador.
BUG=b:156435028,b:151978872
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Verify that the image-terrador.bin is generated successfully.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I4bf9081b034bc4cd566dde45586be8309cdbb4a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42302
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds memory parts used by variant terrador to
mem_list_variant.txt and generates DRAM IDs allocated to these parts.
Added memory
1. MT53E512M64D4NW-046 WT:E
2. MT53E1G64D8NW-046 WT:E
BUG=b:159195585,b:152936481,b:156435028
TEST="emerge-volteer coreboot chromeos-bootimage", flash terrador and
verify terrador boots to kernel.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia14f76e9cb0df64961d46f4b61b39439e56f6a8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41995
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds the following memory parts to LP4x global list and
generates SPDs using gen_spd.go for TGL:
1. MT53E512M64D4NW-046 WT:E
2. MT53E1G64D8NW-046 WT:E
BUG=b:159195585,b:152936481,b:156435028
TEST=build.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If69087e5e189b3e0f70e5f1afbfe3f884173d3b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Diffentiate Lazor and trogdor build configuration
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I3ad413ea6e658e939796bebdff8c1e0dd76417cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42730
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of directly reading ABAR without any checking, do like i82801ix
and treat it as a resource. This prevents problems if ABAR is not set.
Change-Id: I4f888b748204860b0a7e1bf5611f5f3e487e8081
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The `ENABLE_SMBUS_METHODS` symbol is not defined anywhere, so this code
isn't even being tested. So, throw it into the bitbucket before it rots
any further. If anyone needs that code ever again, it's in git history.
Change-Id: I22e3f1ad54e81f811c9660d54f3765f3c6b83f01
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable HotPlug for the PCIe root port that the SD express is on so the
OS can re-train the link without needing a reboot if it goes down
unexpectedly at runtime.
BUG=b:156879564
BRANCH=master
TEST=enable HotPlug on Volteer Root Port 7 (SD express) and check in
linux that it is identified as a HotPlug capable root port
Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com>
Change-Id: Ie9d427dd297567f06123119a670b5ed2e1f73701
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42897
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In some cases, the SoC did not even select `REG_SCRIPT` in Kconfig.
Change-Id: I617f332b80c534997e06a91247d1be90a85573be
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Even with previous platforms, these entries were not
utilised for raminit.
Change-Id: I9a9a1a292bad8c4c89cbacb826c80f4098cae00f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
A regression sneaked in with 18a8ba41cc (arch/x86: Remove RELOCATABLE_
RAMSTAGE). We want to call load_relocatable_ramstage() on x86, and
cbfs_prog_stage_load() on other architectures. But with the current
code the latter is also called on x86 if the former succeeded. Fix
that and also balance the if structure to make it more obvious.
TEST=qemu-system-x86_64 boots to payload again.
Change-Id: I5b1db5aac772b9b3a388a1a8ae490fa627334320
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43142
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CB:43090 renamed con to conn to avoid issues when building on Windows.
CB:42905 introduced more uses of the old name.
Adapt the latter to comply with the former.
Change-Id: I723141add5452fc541f67cb8591793f2d64cc231
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43141
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PS/2 keyboard and mouse devices are declared twice in the DSDT, once
in mainboard and once in southbridge. It would appear in Windows
Device Manager as two PS/2 keyboards and two PS/2 mouses, all with
resource conflicts. This change drops the declaration from mainboard.
The issue was discovered when this setup was copied for p8z77-m and
being boot tested.
Change-Id: I746a960aaf3992acbcb6a7364641fc4fd12002d2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41225
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As the booting the system can be delayed for a noticeable amount of
time, often 60 seconds is the default, this is not a debug message.
Chose log level BIOS_INFO.
Change-Id: I941792148820c0e1d3fbc80197125fee8cedf09f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
p3b-f suspend code is going to use it.
Change-Id: Iebc17257e9f690115ec35d94c7c36df39341f0df
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41092
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bring DRB7 OpRegion and top-of-memory indicator inside NB device.
Use more concise ASL 2.0 syntax for TOM calculations.
Change-Id: I2c74ef30a9bb48e02154f963b1ca3a4f5f3004df
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Only two mainboard groups use this southbridge:
emulation/qemu-i440fx: Nothing creates or consumes this ACPI path.
asus/p2b: It only fills the (mostly static) PIIX4E PM/SMBus I/O
resources, which are being declared in DSDT.
It is not doing anything useful and causes ACPI errors in Linux
kernel[1][2], so it has to stop.
[1] https://review.coreboot.org/c/coreboot/+/38601
[2] https://review.coreboot.org/c/coreboot/+/38304
Change-Id: I770047610e02c08191613b57c989b3bc1d464684
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I4d62a04778c8f634b48eee459808f640451b9b48
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
We always have it, no need to support opting-out.
For PLATFORM_HAS_DRAM_CLEAR there is a dependency of ramstage
located inside CBMEM, which is only true with ARCH_X86.
Change-Id: I5cbf4063c69571db92de2d321c14d30c272e8098
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43014
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on schematic and gpio table of voxel, generate gpio settings
and overridetree.cb for voxel.
BUG=b:157879197,b:155062762
TEST=FW_NAME=voxel emerge-volteer coreboot chromeos-bootimage
Verify that the image-voxel.bin is generated successfully.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I49c1923e63d87f11de362fd893905ac2f1137bba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Currently, the telemetry settings are not for the pollock platform
and might causethe power and performance issue. so applied the Pollock
reference board settings to Dalboz to improve the performance,
and the values need to be updated after the SDLE test finished.
BUG=b:157961590,b:152922299
TEST=Build.
Change-Id: I0da5b81afaa5814c13ec0257dc0eb3471be94c29
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2228257
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42998
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apply the default USB2 phy tuning parameter for Zork family
BUG=b:155132211
TEST=Build, verified the default value been applied on trembyle
and the USB2 device works well.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I1f00b04173796d70147e232bafa405487b0761e1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2260216
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the USB2 phy tuning parameter to adjust the USB 2.0 PHY driving strength.
BUG=b:156315391
TEST=Build, verified the tuning value been applied on Trembyle.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I3d31792d26729e0acb044282c5300886663dde51
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2208524
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Tested-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The USB-C SBU and HSL orientation configuration depends on the USB
daughterboard used on the system. This patch adds an additional
configuration for supporting passive USB daughterboards using "probe"
directives to select the appropriate configuration at runtime.
BUG=b:158673460
TEST=verified active USB DBs enumerate at USB3 speeds in linux
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Change-Id: Ia4bd97de8f974531f97469a5e47ecf4d948beca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Upcoming builds of boten will use 16 MiB SPI ROM. So create a legacy
Boten variant to support the builds that use 32 MiB SPI ROM.
BUG=None
TEST=Build the boten and boten_legacy variant.
Cq-Depend: TBD
Change-Id: Idf7732768aa7fbf2281a4cbf47b7b5b4f8ef51da
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Upcoming builds of drawcia will use 16 MiB SPI ROM. So create a legacy
Drawcia variant to support the builds that use 32 MiB SPI ROM.
BUG=None
TEST=Build the drawcia and drawcia_legacy variant.
Cq-Depend: TBD
Change-Id: Ifb5a4778abe38a396e35963a3270b0d3cc9809e0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Change-Id: I2c92280f3bbd80bd7a0d3abfb2fddcef997e144e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The bootblock must be 16-bit aligned for it to boot.
BUG=b:159081993
TEST=Made sure trembyle still compiles.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I29c244a3f08df46c5992fe81683b9c0d740ff248
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since coreboot is initializing uart for debug logs, fsp should not reinitialize it.
Thus we need to set FSP UPD to skip Uart init in FSP and use settings done by coreboot
BUG=None
BRANCH=None
TEST=FSP is able to push debug logs on UART with this setting
Cq-Depend: TBD
Change-Id: I0fda2ace3b1f63159e9809d6a3044a3bad452f07
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
The FSP-M/S headers added are generated as per FSP v2194.
BUG=b:159193895
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: TBD
Change-Id: I0cd84fdb0089bf8ea3f4440e89fdee7f11119751
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42471
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skip sending MboxBiosCmdSxInfo for sleep states other than S3. The
PSP only acts on S3 and ignores all others. As a result, the command
register is not cleared upon return and coreboot reports a timeout.
BUG=b:153622879
TEST=Use halt from command line, verify command skipped.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ic47b8507e29e4c53898e88fb46e532b71df87d07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
* Doesn't affect existing x86_32 code.
Tested on qemu using division by zero.
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: Idd12c90a95cc2989eb9b2a718740a84222193f48
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change drops the check for ENV_RAMSTAGE in mainboard_ec_init()
since it is included only in ramstage. Also, the content of
ramstage_ec_init() is moved into mainboard_ec_init().
Change-Id: I282fb07a80f4de6064a544f6dd58e8f973a597b9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43118
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mainboard_ec_init() does nothing in any stage other than ramstage. So,
this change drops the call to mainboard_ec_init() from
romstage.c. Additionally, it also drops ec.c from romstage and
verstage.
Change-Id: Iae0be4d678b0780cf532000a6c0fff1bce333c0e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the function `variant_romstage_entry()` which is
unused on zork.
Change-Id: I140ab3e837971c4c7dbef5d27616043b5fc6c2c9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops codec.asl file from Chrome EC since it is now
unused.
Change-Id: I6c2f3e53b14aaf76b9c6d038a732e79a4d7bb2f1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43043
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the inclusion of codec.asl in DSDT for `GOOG0013`
device and instead uses the newly added Chrome EC audio codec driver
for filling in the device node in SSDT.
TEST=Verified that following node gets generated:
Scope (\_SB.PCI0.LPCB.EC0.CREC)
{
Device (ECA0)
{
Name (_HID, "GOOG0013") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds driver for audio codec device (HID `GOOG0013`) living
behind Chrome EC. This driver generates the required ACPI node for the
codec device. In a later change, GOOG0013 device will be dropped
the .asl file.
Change-Id: Ib2759eac60265ef81df70af1d4f1f72bd9d987e8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43041
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves `if EC_GOOGLE_CHROMEEC` from chromeec/Kconfig to
chromeec/i2c_tunnel/Kconfig. This is done to make it clear that the
Kconfig file in i2c_tunnel is sourced unconditionally, but the configs
in i2c_tunnel/Kconfig are conditionally defined based on the
evaluation of if condition.
This change addressed the feedback received on
https://review.coreboot.org/c/coreboot/+/40515/11/src/ec/google/chromeec/Kconfig#200.
Change-Id: I66cd91d6b1813ff6d0fb7be719e2da65ac6ac23b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43040
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops H1_PCH_INT macro for GPIO_9 since it is the same
across all variants. Also, the name differed from the schematics
version `H1_PCH_INT_ODL` creating confusion.
Change-Id: I7b038426a984d8abc460a0da3ee1dc5559d7ad5f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
No x86 mainboard has a reset.c file.
Change-Id: I167629c7addf485944926d57cf0228606c0f32e5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42582
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Needed for `chip drivers/ipmi` in the devicetree.
Change-Id: Ice70aab7cedaeb91a33dd90d763c5a487f190b8f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41687
Reviewed-by: Michael Niewöhner
Reviewed-by: Jonathan Kollasch <jakllsch@kollasch.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7015d4bf6f536c5cea8e1174db81f09f756ae0e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Michael Niewöhner
|
|
With devicetree listing drivers/pc80/tpm, it is compulsory
to have the corresponding driver included in the build.
Followup work will drop the associated weak function
declaration that util/sconfig currently generates.
Change-Id: Ife8deb2c973ab7c7b820244b6f72efd3b56570ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43047
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I11b02cc5f8b59559443329fe0c49a6fb82b7862a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41726
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix integer with different size to pointer conversion on x86_64.
Change-Id: Ic06a32d549b694310f4c724246f28fed15acf83f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42983
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix integer with different size to pointer conversion.
Change-Id: I9c13892b2d79be12cc6bf7bc0a5e3a39b64032a1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42984
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For historical reasons, Windows has issues with certain names being
used for files and directories, 'con' or 'CON' being one of
them. Therefore, rename the pmc_mux/con driver to pmc_mux/conn in
order to work around this issue.
TEST=built volteer (only user of this driver as of now)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia78dc4efe647c96a7169a3b95fc3b8944d052c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Change-Id: Ic66f7c919a71cb53773d5056e5f756cd6faf4909
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43135
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, the certain postcode values aren't in increasing
order of values.
The change, just reorganzies the defines in increasing order
of the values
Signed-off-by: Sindhoor Tilak <sindhoor@sin9yt.net>
Change-Id: Id5f0ddc4593f689829ab9a7fdeebd5f66939bf79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
It implements the SMBIOS IPMI FRU mapping table defined in
https://www.opencompute.org/documents/facebook-xeon-motherboard-v31
22.3 SMBIOS FRU mapping table.
Mainboard needs to configure the correct values for FRU_DEVICE_ID and BMC_KCS_BASE.
For type 11 string 1 to 6 are common and implemented in this driver, the
rest are project dependent and can be added in the mainboard code.
Tested on OCP Tioga Pass.
Change-Id: I08c958dfad83216cd12545760a19d205efc2515b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40308
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix a typo to use CONFIG_DISPLAY_HOBS instead of CONFIG_DISPLAY_HOB.
Build hob display into romstage, in addition to ramstage.
Memory map HOB data is a big structure. Update the soc_display_memmap_hob()
to assist trouble shooting of FSP interface.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iece745fe21d11b4a470ba8318201bb6e68c5da26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42841
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on OCP Delta Lake.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I1e6e2bd25cbe3b0c0547dda9e457c4d55df28388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42428
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are 4 slots in YV3, Location In Chassis should be 1~4.
Tested=on OCP Delta Lake, dmidecode -t 2 verified the string is correct.
Change-Id: I3b65ecc6f6421d85d1cb890c522be4787362a01b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Refer to section 7.9 Port Connector Information of DSP0134_3.3.0
to add type 8 data, the table of data should be ported according
to platform design and MB silkscreen.
Change-Id: I81e25d27c9c6717750edf1d547e5f4cfb8f1da14
Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add a new LB_TAG_PLATFORM_BLOB_VERSION for FSP version, it would
add Intel FSP version to coreboot table LB_TAG_PLATFORM_BLOB_VERSION
when PLATFORM_USES_FSP2_0 is selected.
Tested=On OCP Delta Lake, with an updated LinuxBoot payload cbmem utility
can see "LB_TAG_PLATFORM_BLOB_VERSION": "2.1-0.0.1.120"
Change-Id: I92a13ca91b9f66a7517cfd6784f3f692ff34e765
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Replace uses with MAINBOARD_HAS_LPC_TPM, if drivers/pc80/tpm
is present in devicetree.cb it is necessary to always include
the driver in the build.
Change-Id: I9ab921ab70f7b527a52fbf5f775aa063d9a706ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
|
|
1. Populate SMBIOS data from OCP_DMI driver read from FRU and PPIN MSR
for OEM string 1 to 6, add string 8 for PCIE configuration.
2. Set the read PPIN MSR to BMC.
Tested on OCP Delta Lake.
Change-Id: I9127cf5da1c56d8012694d070615aec24cc22fdf
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41279
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These changes are in accordance with the documentation:
[*] page 208-209
Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual,
Volume 4: Model-Specific Registers. May 2019.
Order Number: 335592-070US
Tested on OCP Tioga Pass and Delta Lake.
Change-Id: I8c2eac055a065c06859a3cb7b48ed59f15ae2fc4
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42901
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's necessary to run IPMI commands in romstage for writing error SEL
such as memory initialization error SEL, and also for other usages
such as starting FRB2 timer, OEM commands, etc.
Add CONFIG_BMC_KCS_BASE for BMC KCS port address that can be used
across romstage and ramstage.
Change-Id: Ie3198965670454b123e570f9056673fdf515f52b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40234
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Able to build and boot TGLRVP.
Change-Id: I7be3cb0bd63778e34c810d69e68b584691225f7a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:158140797
TEST=build and boot volteer with CSE Lite SKU
Cq-Depend: chrome-internal:3100721
Change-Id: I4f939883617a1271b30c76d41e61113bbdd6ab5b
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42070
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A UPD HybridStorageMode allows a platform to dynamically configure the
PCIe strap configuration required if an Optane device is connected.
The strap configuration is done by HECI commands between FSP and CSE to
override the default PCIe strap value, and the updated strap value is
stored in SPI RW data to be used on the next boot.
CSE Lite supports the strap override when running on CSE RW partition,
while CSE RO partition does not support it because CSE RO is not allowed
to access SPI RW data. The strap override failure on CSE RO causes FSP
not initializing PCH Clkreq and PCIe port mapping and this results NVMe
and Optane initialization failure.
By disabling HybridStorageMode in case of CSE RO boot, NVMe detection is
done by the default PCIe configuration and Optane is detected as a
single NVMe storage device on CSE RO boot in recovery mode. Both NVMe
and Optane devices detection as well as OS installation to these storage
devices are verified on CSE RO boot in recovery mode.
BUG=b:158643194
TEST=boot and verified with tglrvp and volteer in recovery mode
Cq-Depend: chrome-internal:3100721
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I5397cfc007069debe3701bf1e38e81bd17a29f0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42282
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The eSPI polarity macros were reversed. Those are fixed so adjust
the corresponding values related to the correct expectations of
the IRQ path: eSPI virtual wire IRQs are active level high. The EC
sends active level high virtual wire IRQs. The default interrupt
encodings in ACPI for P2/S devices are active edge high. Therefore,
there is no need to override anything.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia28d82cd9e432df98839f68bac4eae4447455e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
eSPI interrupts are active level high. The eSPI polarity register
in the chipset inverts incoming signals if the corresonding bit
is 0 in the register. Therefore, all active high (edge or level)
virtual wire interrupts need to ensure they are not inverted.
And really the sender of the interrupts should be conforming to the
the eSPI spec. As such inverting any signals should not be necessary,
but this register in the chipset allows for fixing up those misbehaviors.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7346bb0484506d96d7ab2e6d046ffa0571683a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic9f2e44692b20c2efabc468b10ec531e8b5a3e59
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41706
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3fad7cb2ac0b88adbe75acfa7a17f5a9b0bde6c2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41705
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If25ed7b5cc545abcbf16af66173058dde75260f7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41703
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie64b267ac01afa9774105e1ab8a7c18021726ff3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41871
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Time Window Tau bits are only supported by Comet Lake/Cannon Lake
onwards, so skip setting those bits for earlier SoCs.
Change-Id: Iff899ee8280a9b9bbcea57d4e98b92d5410be21d
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
V.2: Spare USB routed internally to another peripheral and so
no plug event hook needed.
BUG=b:1603699358,b:157479891
BRANCH=none
TEST=none
Change-Id: Ideacac417a46b96f3e82b53bbb341ecce79ee420
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42994
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:160296662
BRANCH=none
TEST=none
Change-Id: I5298e1779461995a98722099b397692351767089
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42975
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:160295948
BRANCH=none
TEST=none
Change-Id: I3600340d3448457942c827a463b458b280fea19a
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
BUG=b:160296661
BRANCH=none
TEST=none
Change-Id: Id5a03f2cbdca2723ab1882c619d2d34387996b27
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42973
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:160296325
BRANCH=none
TEST=none
Change-Id: Iffa6997029d0babfd6dd504a6cc212bd74de3a8f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42972
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Originally, there was problem with PC Engines apu1 platform
which returned serial number value as -64. It was caused by wrong
value of dev->bus->secondary.
Source of the problem is in Porting.h header file. It contains
'#pragma pack(1)' which affects struct device. As mainboard.c
uses different binary layout because of this attribute,
reference dev->bus->secondary lands at wrong memory address.
This patch reorder includes and put <AGESA.h> and <AMD.h>
at the end of list, making struct device consistent.
As a result bus number value in device's structure is correct
and hence serial number.
TEST=`dmidecode -t 2` command in Linux Debian
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Change-Id: I5e8690d100b38ac7889395d375c0ff32bdefda0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42512
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
