| Age | Commit message (Collapse) | Author |
|---|
|
On guybrush, keyboard presses are signaled by the EC via eSPI virtual
wire. The interrupt is shared with others and should be active low.
From 74bce48f1d4 ("mb/google/{zork,guybrush,skyrim},soc/amd/espi: Fix vw_irq_polarity"):
> The default state for the IRQ lines when the eSPI controller comes
> out of reset is high. This is because the IRQ lines are shared with
> the other IRQ sources using AND gates. This means that in order to
> not cause any spurious interrupts or miss any interrupts, the
> IO-APIC must use a low polarity trigger.
Setting `vw_irq_polarity` in the device tree provides an option to
invert interrupts from the eSPI controller, but the register is
initialized from verstage which is baked into RO.
As a workaround, the necessary interrupts on the EC have been
reconfigured to be active low, and we can modify the IO-APIC
accordingly.
EC related CL here: https://crrev.com/c/4891663
BUG=b:218874489
TEST=-`emerge-guybrush chromeos-ec coreboot chromeos-bootimage`
-Flash new RW fw and verify keyboard is functional
-`suspend_stress_test -c 1` and verify i8042 irq is removed as a
wake source
-`echo mem > /sys/power/state`. Press key and verify system wake
from i8042.
Cq-Depend: chromium:4891663
Change-Id: I7d093d94a666263684645ef724e945069c68c806
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Thanks to x86 CBFS cache support, we can leverage cbfs_map() function
to load the VBT binary regardless of if it is compressed or not.
Change-Id: I1e37e718a71bd85b0d7dee1efc4c0391798f16f7
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Commit 1df1cf994aa9 ("commonlib/fsp_relocate: add PE32 section
support") introduced a potential NULL pointer dereference if there is
PE32 binary to relocate outside of the first firmware volume.
The `fih_offset' pointer was used as an output variable but now it is
also used as an input variable to pass the FSP information header to
the `pe_relocate()' function.
This commit resolves this potential NULL-pointer dereference by
passing the pointer systematically and without affecting the logic as
it is only set if it has not been set before.
Change-Id: I9fad90a60854d5f050aa044a5c0b3af91c99df4a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78501
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A new FSP-S UPD is added to allow passing a buffer containing boot logo
in BMP format. Update the FSP-S UPD and add a SoC specific callback to
populate the UPD.
BUG=b:294055390
TEST=Build and boot to OS in Skyrim. Pass the BMP logo buffer through
the UPD to FSP-S. Ensure that the concerned driver in FSP-S handles the
buffer.
Change-Id: Ie522956b6dfe2400ef91d43c80f2adc6d52c8415
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78817
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I think this was probably a cut & paste error. We don't want prompts
for the "default" Kconfig options. Those should be set by the platform,
not the end user. These prompts didn't make sense where they were in the
Kconfig menus either.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Idcd2ba84591d31a9a25bcc6cae3ec163939d7836
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The ACPI name of any device needs to match the name used for generating
the S0i3 LPI constraint list, which comes from soc_acpi_name() for each
SoC. The names used for the eMMC controller do not match, which will
lead to broken ACPI tables since the LPI constriant will reference
an ACPI device which does not exist. Some OSes tolerate this better
than others, but it should still be corrected.
TEST=build/boot google/{hatch,volteer, brya}, dump ACPI and verify
no invalid device names referenced.
Change-Id: Icbc22b6b2a84bbe73f1b09083f27081612db5eba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78825
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch fixes the redundent GFX modeset issue when a dual display
is attached (e.g. an eDP display and an HDMI display).
The issue was caused by the MBUS joining logic not considering the
display type. This patch introduces three types of display: internal,
external, and dual-display. The MBUS joining logic is then updated
to consider the display type and ensure that the correct pipes are
joined to the MBUS:
For internal-only displays, only PIPE-A is joined to the MBUS.
For external displays, no pipes are joined to the MBUS.
For dual-displays, all available pipes are joined to the MBUS.
BUG=b:284799726
TEST=Able to fix the redundent modeset issue when eDP and HDMI attached
to the google/rex.
Change-Id: Ie2a3b9f1212a9dcab2b7305078fe22ee35e7423c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78691
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In 64bit movsq is available which moves memory in chunks of 8 bytes
rather than 4 bytes.
Linux uses the same code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I65f178d2ed3aae54b0c1ce739c2b4af8738b9fcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change the WiFi device type to generic, so that the LPI constraint
generator does not create a reference for a device which does not
exist in ACPI (SB.PCI0.RP14.MCHC). The invalid reference causes
a Windows BSOD.
TEST=build/boot Win11 on google/hatch (akemi)
Change-Id: Ieab0722a81f0952bb5b6df8e60c4d684ff455418
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78543
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VccSA Power State 2 (PS2) current threshold has be adjusted to 10A to
improve PS2 residency which reduces Voltage Regular (VR) power loss.
BUG=b:308002192
TEST=power and performance analysis shows a positive Load Line result
Change-Id: I2da2b05de8a04f91dacaa55062165c4351422865
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
No driver available or needed under Windows, so hide from OS.
TEST=build/boot Win11 on google/kahlee (liara), verify ADAU7002
device no longer listed as unknown under Device Manager.
Boot Linux and verify audio still functional.
Change-Id: If6d250a123825a69441b5c4d3cde35d5a68f568d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78510
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the required FMD changes to support the change
in cse_lite 'commit Ie0266e50463926b8d377825 ("remove
cbfs_unverified_area_map() API in cse_lite")' for CBFS verification.
With the change in cse_lite the ME_RW_A/B blobs are now part of
FW_MAIN_A/B and corresponding entries in FMD can be removed for boards
that currently use them.
BUG=b:284382452
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I3ca88fee181f059852923d50292b24c0e5b9fd6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Enable FW_CONFIG for geralt so that the information can be passed to
payloads via coreboot tables.
BUG=b:157692450
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: I8898143f44d2ffda3cb1708c2d7efadc289303a1
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add data.vbt file for quandiso recovery image. Select INTEL_GMA_HAVE_VBT
for quandiso as it has a VBT file now. The VBT file is copied from
chromeos internal source and based on yaviks VBT.
BUG=b:296506936
TEST=emerge-nissa coreboot
Change-Id: Ia9f84b4f56171737a9e7a513b63549b3013775c4
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77588
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Shawn Ku <shawnku@google.com>
|
|
The codec alc5650 has different setting from other amp codec in
depthcharge. Since nissa has a single shared depthcharge target,
add the fw_config field to allow different audio_configs.
(refer to chromium:4983866)
BUG=b:307410704
TEST=With depthcharge change, set fw_config and gbb flags on craaskana
and check beep sound on firmware screen is workable.
Change-Id: I7446fce57557204d91151f1a31755381c1813c6f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78791
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
During warm reboot, NVMe is not detected with non-serial image
sometimes while there is no issue with serial image. This change
toggles NVMe PWR pin as soon as in early stage to make NVMe ready
sooner.
BUG=b:260547988
BRANCH=None
TEST= Build rex0 and try warm reboot from OS console. Check if
the platform with Micron SSD boots to OS again without an issue.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I2f34e3f49e7fc388198ff85c8e119cb3f242a60e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Intel has identified an idle hang issue on pre-prod silicon that will
not be fixed or root-caused. To avoid the issue, this commit sets
SaGvWpMask to SAGV_POINTS_0_1_2 in the devicetree.
Note: This change will affect system power.
BUG=b:287170545
TEST=Able to idle for more than 5+ hours without any hang on
google/screebo.
Change-Id: Id0b8db0076d983d336c3bec6d6c33614c69964d1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78794
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds power limit settings for 4+8 28W SOC sku and renames
MTL_P_682_CORE to MTL_P_682_482_CORE since they are sharing same 28W
settings.
BUG=b:306677879
TEST=boot on rex with 4+8 SOC and power limit settings are correct
Change-Id: Icb5fc2b13e8510f89c03927439431190439a3a94
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78796
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 7499d9610016c4a89b722498885f196ed6d217aa.
Reason for revert: coreboot build fails
Change-Id: I8ef853d81ee9b1f18d36dfd82cdf687381ece2c6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78845
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The code for "phase 4" of firmware verification currently only sets a
recovery reason when there's an actual hash mismatch detected in
vb2api_check_hash_get_digest(). This is the most likely way how this
section of code can fail but not the only one. If any other unexpected
issue occurs, we should still set a recovery reason rather than just
reboot and risk an infinite boot loop.
This patch adds a catchall recovery reason for any error code that falls
out of this block of code. If a more specific recovery reason had
already been set beforehand, we'll continue to use that -- if not, we'll
set VB2_RECOVERY_FW_GET_FW_BODY.
Change-Id: If00f8f8a5d17aa113e0325aad58d367f244aca49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78821
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Windows doesn't have / will likely never have a signed driver for the
FPR, so set the device status as hidden so it will not appear as an
unknown device in Windows Device Manager. Linux does not check/care
about the ACPI device status.
TEST=build/boot Win11 on google/brya (kano), verify FPR does not show
up as unknown device under Device Manager.
Change-Id: Ie73fd9d448ecca9e9112abc0d92b4ab46ce3618d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Windows doesn't have / will likely never have a signed driver for the
FPR, so set the device status as hidden so it will not appear as an
unknown device in Windows Device Manager. Linux does not check/care
about the ACPI device status.
TEST=build/boot Win11 on google/hatch (jinlon), verify FPR does not
show up as unknown device under Device Manager.
Change-Id: Ia4a908afdabad0ae8db45c4731a00c9cb17b42bb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Adapted from Alderlake implementation, modified as needed.
Device names missing from soc_acpi_name() were added as well.
TEST=build/boot Win11, Linux on google/hatch (akemi).
Change-Id: Ib2c733c04e29f0f9e7e2e6dbf36c2a7618fdc23f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Copied from Alderlake implementation, modified as needed for Tigerlake.
Device names missing from soc_acpi_name() were added as well.
TEST=build/boot Win11, Linux on google/volteer (drobit).
Change-Id: I34999891ea0d386328698109b6315d481de7c43a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78521
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch includes the soc.asl from Genoa (SoC) folder,
which in-turn includes pci_int_def.asl
Change-Id: Id7a3b9c752546638f7b446510e17c44e9f10106d
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78496
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds PCI interrupt details as per the Processor Programming
Reference (PPR) version 0.25 (#55901), table 319.
Change-Id: I81251bd60aac1d7bd3181699d3adca315291f336
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78392
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables FVM for IA and SA VRs as per the OEM requirement.
BUG=b:307237761
TEST=Able to build and boot google/screebo.
Change-Id: Icb0611331ac7090d11d646a5ad5201593a90aacb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch allows google/rex mainboard to choose between "Performance"
(PL_PERFORMANCE) and "Baseline" (PL_BASELINE) power limits (PLs).
This is important for platform to meet balance between power and
performance.
The OEM design google/screebo selects baseline power limit to maintain
the balance performance in lower power.
BUG=b:307237761
TEST=Able to build and boot google/screebo.
w/o this patch:
screebo4es-rev1 ~ # cbmem -c -1 | grep "CPU PL"
[INFO ] CPU PL1 = 15 Watts
[INFO ] CPU PL2 = 57 Watts
[INFO ] CPU PL4 = 114 Watts
w/ this patch:
screebo4es-rev1 ~ # cbmem -c -1 | grep "CPU PL"
[INFO ] CPU PL1 = 15 Watts
[INFO ] CPU PL2 = 40 Watts
[INFO ] CPU PL4 = 84 Watts
Change-Id: I43debc5442ae9c01851652beba676ffc102ca27d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I2f641ce1fc44a9d7c9f9c403d255997214021f47
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I15f326774850b3c9562f7eebb78f29430dec1031
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78667
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I75aeb46ea3b4a7c0a41dce375735e7b42ed59587
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78664
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I92414efc9ddb849ceb8b9c4f0bc564bdbd92773b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78638
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch palkia overridetree to use chipset devicetree references.
Change-Id: Ic5fd2d139d22824d3ada09325022c37e69b5e2a9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Switch nightfury overridetree to use chipset devicetree references.
Drop USB port overrides which are identical to the baseboard.
Change-Id: I9bb028ad12b97fd4510f6d1026fdc16232c64dba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78570
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch mushu overridetree to use chipset devicetree references.
Change-Id: Iac05b0b2c5785f2cb69a29aa4d4c3088f164385f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Switch kohaku overridetree to use chipset devicetree references.
Drop USB port overrides which are identical to the baseboard.
Change-Id: Idcfde6882fc433e6a248aff6baf23b1a5bf7d201
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add a new Krabby follower 'Chinchou'.
BUG=b:307161347
TEST=make # select Chinchou
Change-Id: Ic90f85621598ab253d3ec9fe44aa076712248223
Signed-off-by: wuyang5 <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78596
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DDR interfaces emit electromagnetic radiation which can couple
to the antennas of various radios that are integrated in the system,
and cause radio frequency interference (RFI). The DDR Radio Frequency
Interference Mitigation (DDR RFIM) feature is primarily aimed at
resolving narrowband RFI from DDR4/5 and LPDDR4/5 technologies
for the Wi-Fi high and ultra-high bands (~5-7 GHz).
This patch sets CnviDdrRfim UPD and enables CNVI DDR RFIM feature
for Craask variant.
Refer to Intel doc:640438 and doc:690608 for more details.
BUG=None
BRANCH=None
TEST=Build and boot Craask.
- Verified that Wifi DDR RFIM Feature is enabled and DDR RFI table can be modified.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I5560bbedb26e88edd9d35f16b639fe63ef42c30e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Just as in commit 38569d061099: ("mb/lenovo/{x230, x230s}: Disable
SuperSpeed capabilities for WWAN USB")
Although on ThinkPads with Panther Point PCH the usb port inside wwan
socket is usually wired to XHCI, it has actually no SuperSpeed lines,
so maybe it is okay to disable SuperSpeed capabilities, and wire them
to EHCI #2 by making use of XUSB2PRM and USB3PRM.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I61e61283a821686558f7f3fdfac7073bb3557e93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78680
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Meteor Lake has a UPD config called In-Band ECC(IBECC) which uses a part of the system DRAM to store the ECC information. There are a few UPD parameters in FSP-M to configure this feature as needed.
This patch adds code to expose these parameters to the devicetree so
that they can be configured on the mainboard level as needed.
Change-Id: Ice1ede430d36dff4175a92941ee85cc933fa56d5
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Export Power State Current 1, 2 and 3 Threshold configuration entries.
BUG=b:308002192
Change-Id: Iff4467720541efbdedace12431cd1f6f66fca8e6
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patches privides settings based on 2+8 15w.
BUG=b:306543967
TEST=boot on rex with 2+4 SOC and power limit settings are overridden
correctly in variant_update_cpu_power_limits
Change-Id: I0560e44ce8e0d91bb5fb9c7cc9ffe68ab050bf00
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78688
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This commit adds power limit settings for 2+4 15w SOC sku and renames
MTL_P_282_CORE to MTL_P_282_242_CORE since they are sharing same 15w
settings.
BUG=b:306543967
TEST=boot on rex with 2+4 SOC and power limit settings are correct
Change-Id: Id738303d1652f964142f8f27110426d6b84609bf
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78495
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPP_B17 (aka. EN_WWAN_PWR) should be kept low when the device does not
have a WWAN module.
TEST=Power consumption drops to 0 in S0iX
Change-Id: I95150c20c98b037a47827a7b83e4373c6e9070e3
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78684
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Update overridetree for ILI2901 and eKTH7B18U touchscreen.
BUG=b:299284564, b:298328847, b:299570339
TEST=emerge-brya coreboot
Change-Id: Ib45f3c7c92ea525ca13a6137dd87eeb318f30384
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they will be moved
into the devicetree to their related root ports at some later point.
While on it, remove superfluous comments related to modified lines.
Change-Id: I27bac17098beb8b6cb3942e68a37da0095f0d0bd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Alphabetize board entries, Kconfig selections, and config options.
Change-Id: I94e6e584809888fc9cab1b4cff6c0368803c1d47
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I6843fd2eb752cd35d8c67ad7487f6dbb1c1afc62
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78707
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Alphabetize board entries, Kconfig selections, and config options.
Change-Id: I599eda8c136d072471f022be9397faeb0e061472
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78706
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alphabetize entries and add consumer product names for boards where
available.
Change-Id: I22a18ba85d6ff203765f984fba51784757a2a4df
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78705
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alphabetize board entries, Kconfig selections, and config options.
Reverse default logic of PERFORM_SPL_FUSING for simplicity / clarity.
Change-Id: Ib25bb8c7bbf994f2f0675c4599c70a7db5d9f7ef
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Alphabetize entries and add consumer product names for boards where
available.
Change-Id: I7459ee0a63025c12c7dbe75c578c7496c49fa475
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78703
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch introduces a dedicated devicetree.cb file for platforms
built with pre-production SoC. This will help to keep the SoC
configuration separate for platforms with ESx and QSx silicons.
For example, the SaGv WP configuration is different between
pre-production (aka ESx) and production (aka QSx) silicon.
BUG=b:306267652
TEST=Able to build and boot google/rex4es.
Change-Id: I01b0abeeb25ce5a83882c56b30929228fcc6c95c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Mike Lee <mike5@huaqin.corp-partner.google.com>
|
|
For variants without a digitizer, disable I2C2.
For variants without a proximity sensor, disable I2C3.
For variants without a fingerprint reader, disable SPI1.
For all variants, disable I2C5 as it is unused.
Adjust comment blocks as needed.
Change-Id: I27e9eb2b0dcc869d1964c0b17c656d6691c0f05e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78553
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch jinlon overridetree to use chipset devicetree references.
Change-Id: I663a1d051d287f8484c5d4d175337f4f24081044
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Switch kindred overridetree to use chipset devicetree references.
Change-Id: I2c54406948d2db53d25aa7c3dc79cfb5661c4a69
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78564
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow thermal validation, override tdp pl1 in 6w ADL_N platform to
10w and override tdp pl1 in 15w ADL_N platform to 20w.
BUG=b:307365403
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I8dd743e65b9e5fbd6aa2fd9c1b87c7bd487c8174
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78650
Reviewed-by: ChiaLing <chia-ling.hou@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
|
|
STM_RSC_MEM_DESC defines rws_attributes as 3 bits, which can't be
greater than 7.
Found-by: Coverity Scan #1430578
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1efd007e96abd6d5d36f314752abfadffb0024d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they will be moved
into the devicetree to their related root ports at some later point.
While on it, remove superfluous comments related to modified lines.
Change-Id: I769233a5baabbea920c9085f8008071ba34bb9dd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78598
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This includes Kconfig.debug files under vendorcode into the debugging
menu. Currently it's being added to pull vc/amd/opensil/Kconfig.debug
in.
Change-Id: Ie7c8235354ea5a0b156dcbb147d35c157fbd14da
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the common AMD data fabric resource reporting code to report how
openSIL distributed PCI buses, MMIO, and IO resources to coreboot's
resource allocator. This replaces the original CB:76521 which was
written back when the common AMD data fabric resource reporting code
didn't exist yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifcd655ea6d5565668ffee36d0d022b2b711c0b00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iffe21fb0c0bff0fc21ce1ac3af71d39bb62fd384
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78660
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the required FMD changes to support the change
in cse_lite 'commit Ie0266e50463926b8d377825 ("remove
cbfs_unverified_area_map() API in cse_lite")' for CBFS verification.
These blobs were kept separate originally to avoid hash loading and
verification every time and hence save boot time.
With the change in cse_lite the ME_RW_A/B blobs are now part of
FW_MAIN_A/B and corresponding entries in FMD can be removed.
BUG=b:284382452
TEST=Build CB image for google/rex board and test CSE FW
update/downgrade with CONFIG_VBOOT_CBFS_INTEGRATION config enabled.
Also confirm there is no increase in boot time with this change.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I56865a9e5c8b5f9e908e00e1a7e7e187d5d6a2f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With CBFS verification feature (CONFIG_VBOOT_CBFS_INTEGRATION)
being enabled, we can now remove cbfs_unverified_area_map() APIs
which are potential cause of security issues as they skip verification.
These APIs were used earlier to skip verification and hence save
boot time. With CBFS verification enabled, the files are verified
only when being loaded so we can now use cbfs_cbmem_alloc()/cbfs_map
function to load them.
BUG=b:284382452
Change-Id: Ie0266e50463926b8d377825142afda7f44754eb7
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78214
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
Checking in gpio.c generated by arbitrage. Used this command line to
generate:
arb export-coreboot-gpio --refdes=U1 brox:proto1_20231017
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I1098bd4cfde393ed9e78cd90158c3534fdf0dc09
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78657
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skolas is actually using the SOC_INTEL_ALDERLAKE_PCH_P config, so
fixing Brox to reflect this as it's using the same SoC.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I632ec055d523956983d2053cd8e7000b1eaabf92
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78656
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rework the UART devicetree entry so that it doesn't conflict with the
to-be-added chipset devicetree for CNL. This should be functionally
equivalent to the previous entry, but needs testing to verify.
Change-Id: Iae60cb8e0746e7dc2928da3687762b81928fb5f0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78546
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Switch baseboard devicetree to use chipset devicetree references.
Drop any devices whose status (on/off/hidden) matches the default
in the chipset DT.
TEST=build/boot google/hatch (akemi)
Change-Id: I5954c304f3c0e04be7e061c1c23a278f81b6ff4d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I8ceae832e60cd3094b4a34ab3a279e5a011f2c80
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Switch helios_diskswap overridetree to use chipset devicetree references.
Change-Id: I0a3385139c74a59c2006b8963850d00ee39f70a8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78560
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Switch helios overridetree to use chipset devicetree references.
Change-Id: If7901066a0c77231779eb298dc40962d8ac62814
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Switch hatch overridetree to use chipset devicetree references.
Change-Id: Icccb433ba3e5a1ecb192f8db830674047e801623
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Switch dratini overridetree to use chipset devicetree references.
Change-Id: I9f365077291ee9fa5f4dcf8835756f4cfd6eeab4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Switch akemi overridetree to use chipset devicetree references.
Drop USB port overrides which are identical to the baseboard.
TEST=build/boot google/hatch (akemi)
Change-Id: Ic25fbe4a634f8166047107a33c9fcee764f1159a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78552
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce Kconfig choice to pick between lzma, lz4 and no compression
at all of the VBT binary.
If VBT is needed in romstage, it can be used to set VBT lz4
compression as an alternative to enabling lzma compression support.
Indeed, the extra lzma code needed to de-compress VBT undermines the
compression size reduction between lzma and lz4.
BUG=b:279173035
TEST=Verified that vbt.bin is lz4 compressed with
VBT_CBFS_COMPRESSION_LZ4 and not compressed at all with
VBT_CBFS_COMPRESSION_NONE
Change-Id: I1df6a96c2ec122f0ef8ee6a1e96ffbd621b14941
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
POWER_STATE_OFF_AFTER_FAILURE can't be directly selected since it's a
choice, so instead set POWER_STATE_DEFAULT_ON_AFTER_FAILURE to n, as
it's functionally equivalent. This fixes the warnings generated by
the pre-commit hook Kconfig check.
It is necessary to override and set default n in the mainboard Kconfig
as it is set to default y in src/soc/intel/common/block/pmc/Kconfig.
TEST=select starlabs/starbook_adl in menuconfig and verify the default
power-on setting is S5/soft off.
Change-Id: I3ce33517dcc0af693b8db8d1de2926117ad3c16b
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78627
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add FP enable/disable based on SKU ID for Morphius. This is meant
to resolve a UMA issue with Morphius devices that had the FPMCU
populated on non-fp devices. Since the FPMCU is present, and the
firmware enables the power GPIO's based on variant, not SKU, the
devices were reporting data on fingerprint errantly.
BUG=b:258040377
TEST=Flash to Morphius, test FP.
Disable test SKU, flash on Morphius, test FP.
Change-Id: If5794a9a1b7eb3daaa4cdfd1354dfb0c688624fd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78622
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
CB:77409 corrected what the UPD `Timer8254ClkSetting` was set to; this
stopped a few boards from booting.
Selecting USE_LEGACY_8254_TIMER ensures that the previous behaviour is
maintained.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibf898cae6c9fbaf3dc7184eee745278d9b5eade4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78504
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is required for compliant ACPI/SMBIOS implementations on AArch64,
and can optionally be displayed to the user.
Change-Id: I7022fc3c0035208bc3fdc716fc33f6b78d8e74fc
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Simplify audio overrides for dalboz baseboard-based variants by using
device aliases. This prevents duplicate ACPI devices from being
generated for the ChromeEC i2s tunnel (which causes Windows to BSOD
with an ACPI_BIOS_ERROR).
TEST=build/boot Win11 on google/zork (vilboz), dump ACPI tables
and verify only one EC tunnel device in SSDT.
Change-Id: I56aa2f761843aa269620f7e8c89ae9c0f205f349
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78509
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is only a single i2c tunnel bus for audio from the EC, so all
attached devices need to exist under a single device attached to that
bus. This change will facilitate cleanup/simplification using device
aliases in a subsequent commit.
TEST=tested with rest of patch train
Change-Id: Ie09c682a7419868d39421574568dff1a651fa0dc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78626
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select SOC_AMD_COMMON_LATE_SMM_LOCKING to ensure that SMM remains
unlocked on S3 resume until after the AGESA call to s3finalrestore
has completed. If SMM is locked prior, S3 resume will fail:
[DEBUG] agesawrapper_amds3laterestore() entry
[DEBUG] Error: Can't find 57a9e200 raw data to imd
[ERROR] S3 volatile data not found
TEST=build/boot google/liara, verify S3 resume succeeds.
Change-Id: I49659b4e5aba42367d6347e705cd92492fc34a0f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Pre-Zen SoCs like Stoneyridge call into an AGESA binary as part of S3
resume, which will fail if SMM is locked, causing the device to
(eventually) cold boot. To mitigate this, add a new Kconfig to enable
"late" SMM locking, which restores the previous behavior prior to
commit 43ed5d253422 ("cpu/amd: Move locking SMM as part of SMM init").
TEST=tested with rest of patch train
Change-Id: I9971814415271a6a107c327523a0a7c188a91df6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78352
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move all security patch level (SPL) related Kconfig options to the
common AMD PSP Kconfig file. Commit 4ab1db82bb30 ("soc/amd: rework SPL
file override and SPL fusing handling") already reworked the SPL
handling, but missed that another Kconfig option
SOC_AMD_COMMON_BLOCK_PSP_FUSE_SPL controlled if the PSP mailbox command
to update the SPL fuses was sent by the code that got added to the build
when PERFORM_SPL_FUSING was selected.
To make things less unexpected, rename PERFORM_SPL_FUSING to
SOC_AMD_COMMON_BLOCK_PSP_SPL since it actually controls if the SPL
support code is added to the build and also rename
SOC_AMD_COMMON_BLOCK_PSP_FUSE_SPL to PERFORM_SPL_FUSING. This changes
what PERFORM_SPL_FUSING will do from including the code that could do
the fusing if another option is set to being the option that controls if
the fusing mailbox command will be set. All SoCs that support SPL now
select SOC_AMD_COMMON_BLOCK_PSP_SPL in their Kconfig, which won't burn
any SPL fuses.
The logic in the Skyrim mainboard Kconfig file is reworked to select
PERFORM_SPL_FUSING for all boards on which the SPL fuses should be
updated; on Guybrush PERFORM_SPL_FUSING default is changed to y for all
variants. The option to include the code that checks the SPL fusing
conditions and allows sending the command to update the SPL fuses if the
corresponding Kconfig is set doesn't need to be added on the mainboard
level, since it's already selected at the SoC level.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I12fd8775db66f16fe632674cd67c6af483e8d4e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I72ef272e48db7683a3170e157edd0a782143e8aa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Select ACP audio for kahlee since it's located on the GPU.
TEST: build/boot careena to Win10. Observe audio device shows up
Change-Id: I51527a1bfae3e12ce5cf1da8a3465bbc9ddfa76e
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78406
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Supports a brand new ACP driver for STONEY / Grunt chromebooks.
AMD's Audio CoProcessor handles i2s/tdm audio, and is located on the
GPU.
On Windows the PCIe device for the GPU is owned by the AMD proprietary
driver, hence a separate device has to be added for the ACP driver.
Fortunately since IOMMU is disabled on STONEY, the driver itself can
pull BAR5 from the GPU and use that to initialize, so no special
configuration is required in ACPI other than the ID.
Change-Id: I0e31c3b31fa9fb99578c04b79fce2d8c1d695561
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
built without errors.
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I332e404e82a7980bb8ed1fb084fe957f526f81d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78393
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Checking to see if a the location of a static variable is NULL isn't
super useful. If the check ever fails, there are much larger issues.
Found-by: Coverity Scan #1452607
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6d3e012542287511f61807075c998efd6d10441e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78614
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change strcpy to strncpy just to be safe.
Found-by: Coverity Scan #1446759
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7ed094a313692806a6ab6b4226b9978647e9cb8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
By calling get_board_settings() when board_cfg is initialized, board_cfg
is guaranteed not to be NULL, so don't check to see if it's NULL.
Found-by: Coverity Scan #1513079
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I61105be9ed71ff30efdda66d2cbfcaf54d70053f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the devicetree at their related root ports.
Change-Id: I85f7c0ddebf88dd21e6c2603ce45f0a4fc868d51
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78600
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the devicetree at their related root ports.
While on it, remove superfluous comments related to modified settings.
Change-Id: I67f4fdcfb59da6c594c89d7ad3ee7f2ddbbea69b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78592
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the devicetree at their related root ports.
Change-Id: I25b87a157e934640355442edceb0760827dc7a43
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78591
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they will be moved
into the devicetree to their related root ports at some later point.
While on it, remove superfluous comments related to modified settings.
Change-Id: I19af8c6b1167af793eb18b000fd93ec409385587
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78597
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
It's not needed to put a backslash at the end of a line for quoted
multiline values. Thus, remove it.
Change-Id: I1b83d53598ba2adeed853a96d6c2c1a21f01a9f7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78576
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The Medium Time Base (MTB) value is calculated by dividing one SPD
byte by another. Return an error if the divisor is zero before using
the value for division.
Found-by: Coverity Scan #1469303
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic0a70291c42b5c2d21d65de92487b2dd88609983
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78613
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
DDR2 already had a define to specify the SPD length, but other memory
types did not. This led to the value being coded into other locations.
Unify the definition for DDR2 to DDR5 and put the value at the top of
the respective header file.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id13b9c5d311984d4a98b831a8746d1659724aa96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
For Sandy Bridge boards with MRC raminit support, migrate as much
MRC settings to devicetree as possible, to stop mainboard code from
needlessly overwriting entire PEI data structure, so they will not
interfere with upcoming transition to one standard Haswell way of
providing SPD info to northbridge.
Some exceptions allowed are described below and in code comments.
SPD-related items are kept out of devicetree for now. They will be
migrated (with a different representation) with the Haswell SPD
transition.
google/{butterfly,link,parrot,stout} have max DDR3 frequency set in
pei_data to 1600 (2*800), but in devicetree to 666. The reason for the
difference seems to be problems with native raminit code. These are
converted into ternaries tied to CONFIG_USE_NATIVE_RAMINIT, with an
added "fix me" tag. asus/p8x7x-series also needs the same treatment,
based on testing various memory on p8z77-m hardware.
TEST=Builds on all affected boards. asus/p8z77-m still works with multiple RAM modules tested.
Change-Id: Ie349a8f400eecca3cdbc196ea0790aebe0549e39
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The macro ENV_HAS_CBMEM achieves the same as this inline function.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6d65ca51c863abe2106f794398ddd7d7d9ac4b5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77166
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
