summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-05-18soc/intel/alderlake: Add handling of GPIO_COM3 in gpio.aslMaulik V Vaghela
We were not adding power management handling of GPIO_COM3 in gpio.asl This can affect s0ix flow where platform won't go into s0ix since GPIO_COM3 is not power gated. BUG=b:188392183 BRANCH=None TEST=Platform should enter to s0ix and GPIO COMM3 should not block an entry to s0ix. Change-Id: I3f269c66bdd6337adb0d2bd29d0b7d72ced19ec4 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mb/google/brya: Disable dynamic GPIO PM for community 3Maulik V Vaghela
We recently added GPIO definition for PCIE vGPIO for Alder Lake. We also need to disable GPIO dynamic PM for this community which is already done for other communities as well. BUG=b:188392183 BRANCH=None TEST=Code compiles and Check if dynamic PM for GPIO COMM3 is also disabled Change-Id: I2f8645b8f4a9995e727a7623af97531c5de52892 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54383 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18cpu/x86: Only include smm code if CONFIG_HAVE_SMI_HANDLER=yArthur Heymans
This removes the need to include this code separately on each platform. Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-18vboot/secdata_mock: Make v0 kernel secdata contextAseda Aboagye
The new kernel secdata v1 stores the last read EC hash, and reboots the device during EC software sync when that hash didn't match the currently active hash on the EC (this is used with TPM_CR50 to support EC-EFS2 and pretty much a no-op for other devices). Generally, of course the whole point of secdata is always that it persists across reboots, but with MOCK_SECDATA we can't do that. Previously we always happened to somewhat get away with presenting freshly-reinitialized data for MOCK_SECDATA on every boot, but with the EC hash feature in secdata v1, that would cause a reboot loop. The simplest solution is to just pretend we're a secdata v0 device when using MOCK_SECDATA. This was encountered on using a firmware built with MOCK_SECDATA but had EC software sync enabled. BUG=b:187843114 BRANCH=None TEST=`USE=mocktpm cros build-ap -b keeby`; Flash keeby device, verify that DUT does not continuously reboot with EC software sync enabled. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: Id8e81afcddadf27d9eec274f7f85ff1520315aaa Reviewed-on: https://review.coreboot.org/c/coreboot/+/54304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-05-18mb/asus/h61m-cs: Transform into variant setupAngel Pons
To preserve reproducibility, temporarily guard mainboard.c contents. This will be removed once all boards have become variants. Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus H61M-CS remains identical when not adding the .config file in it. Change-Id: I1ffb41470d24713a4a7f0689958b733d4b1bdf52 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-18mb/asus/p8h61-m_pro: Transform into variant setupAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M PRO remains identical when not adding the .config file in it. Change-Id: Iaa53a8a1b75f4c7359e32c6cd8c8a488c5763bbe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-18mb/asus/p8h61-m_lx3_r2_0: Transform into variant setupAngel Pons
Get ready to squash all Asus H61 boards together, so as to factor out lots of redundant code. Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M LX3 R2.0 remains identical when not adding the .config file in it. Change-Id: I738197bf4d5ea8b879ae26ecbcb0cf3714316662 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-18mb/asus/{h61m-cs,p8h61-m_lx}: Reorder `_PTS` and `_WAK`Angel Pons
Done to preserve reproducibility when switching to a variant setup. Change-Id: I78241c807f767846774b8e1a2e0d25f3452ed544 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2021-05-18Asus H61 boards: Align dsdt.asl with other boardsAngel Pons
Prepare to transform Asus H61 boards into a variant setup. Change-Id: Ifd5808edac22ebdba9b29a711ad129b91d9975d0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2021-05-18mb/asus/h61m-cs/Kconfig: Sort selectsAngel Pons
In preparation to switch the Asus H61 boards to a variant setup, sort the `select` lines in Kconfig alphabetically. Change-Id: I91ee7dc601f1fc52a7d68f66555143156b91ebf9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54365 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/asus/p8h61-m_lx/Kconfig: Sort selectsAngel Pons
In preparation to switch the Asus H61 boards to a variant setup, sort the `select` lines in Kconfig alphabetically. Change-Id: Ia5a8d36f78db2262b4c8d48cbb4dd16718d01475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54364 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/asus/p8h61-m_pro/Kconfig: Sort selectsAngel Pons
In preparation to switch the Asus H61 boards to a variant setup, sort the `select` lines in Kconfig alphabetically. Change-Id: I96486d57250e901d872e4ef12967c2aadd9791ea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54363 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/asus/p8h61-m_pro: Relicense gma-mainboard.adsAngel Pons
Commit 65ddbb720b1 (mb/asus/p8h61-m_pro: Add new mainboard) added this file, and I authored this commit. Since most gma-mainboard.ads files are licensed as GPL-2.0-or-later, relicense this one for consistency. Change-Id: I2d28150f4c97ba600cb46fead7bb29cdc65c5baf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54362 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18LGA1155 boards: Drop `VGA_BIOS_{FILE,ID}` for iGPUAngel Pons
These boards have a socketed CPU, and the PCI device ID for the iGPU depends on the installed CPU. Specifying a default doesn't make sense. Change-Id: Iee6749e4fb691f09664cc6ffb3cbf66e4230fa9c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54361 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18option: Introduce `CMOS_LAYOUT_FILE` Kconfig symbolAngel Pons
Mainboards with variants may not always use the same cmos.layout file. Turn the hardcoded path into a Kconfig symbol to allow changing it. Tested with BUILD_TIMELESS=1: Without including the config file in the coreboot.rom and with `USE_OPTION_TABLE` selected, building for the Asus P8H61-M PRO produces an identical coreboot image. Change-Id: I4cc622dcb70855c06cb8a816c34406f8421180df Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54366 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mainboard: Use decimal for `device lapic 0x0 on`Angel Pons
Most boards use `device lapic 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device domain 0x0 on`Angel Pons
Most boards use `device domain 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I6e2f0a19d57cfe6fc4e4ac4d14310133ad6b01d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device cpu_cluster 0x0 on`Angel Pons
Most boards use `device cpu_cluster 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I083c8f8e9b38ddcc217dc8bf17ae3c9473ba77e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18intelblocks/gpio: Add NAVFWE bit to PAD_CFG_DW0 mask definitionMaulik V Vaghela
Definition for NAV_FWE BIT was added in commit e6e8b3d Even if try to set this BIT it was not getting set since PAD_CFG_DW0 mask will make it 0 since this bit was not part of mask. Adding NAV_FWE to mask will resolve this issue and BIT will be set/unset as per programming in mainboard. TEST=Check GPIO register dump and see if BIT is getting set properly. Change-Id: I970ae81ed36da45c3acc61814980b2e6ff889445 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54350 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/dedede: To support ELAN Touchpad device on I2C0Alex1 Kao
Add ELAN Touchpad device under I2C0 BUG=b:188373661 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Change-Id: I15b9cb0d0276b5e2dd06694530cc35e5643efb9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52936 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/brya: Enable HECI1 communicationSridhar Siricilla
The patch enables HECI1 interface to allow OS applications to communicate with CSE. TEST=Verify PCI device 0:16.0 exposed in the lspci output Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I73acdd99788f9b60b7bcea372145e9694a124174 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54210 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18soc/intel/alderlake: mb/intel/sm: Add tcss codeDeepti Deshatty
Enable FSP 'MultiPhaseSilicon' init to execute tcss configure during silicon init. Type-c aux lines DC bias changes are propagated from tigerlake platform. TEST=Verified superspeed pendrive detection on coldboot. Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: Ifce6abb0fce20e408931b904426131a42a5a4a36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mb/google/dedede/var/cret: Enable/disable LTE function based on FW_CONFIGDtrain Hsu
Enable/disable LTE function based on LTE bit of FW_CONFIG. The LTE function settings are included GPIO settings, USB port settings and power off sequence. BUG=b:187797408 BRANCH=dedede TEST=Build and test the change on cret. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ib926e99aaf9df433a7cff71180ee55431d69f718 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-18mb/intel/adlrvp: Disable EC sync for adlrvp_ext_ecMaulik V Vaghela
Since we have TPM disabled on ADLRVP, if we enable EC sync, it keeps rebooting with hash error. Change-Id: I62a4fceb83dc6b20f699b4662e8f421aadafdee5 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-05-18mainboard: Drop useless `acpi_tables.c` filesAngel Pons
The `tcrt` and `tpsv` values in GNVS can be used to implement thermal management in ACPI. However, not all mainboards use these values. On mainboards where `tcrt` and `tpsv` are not used in ACPI tables and are the only values set in the `mainboard_fill_gnvs` function, remove them as well as the entire `acpi_tables.c` file. Most files come from autoport, which unconditionally generates this file. Change-Id: If2315ddd9700e2da0a24ffecc20acb5c1a1d688e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-18mb/ocp/deltalake: Rearrange slot table for remapping type 9 Slot IDJohnny Lin
Change-Id: I07bdf7f85f8411e04da8a94da7de1e7b93c9e921 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-05-18mb/google/cherry: Pass reset gpio parameter to BL31Yidi Lin
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. TEST=execute `echo b > /proc/sysrq-trigger` to reboot system Change-Id: I1a55216c0d5a00bbdb373d931bd50ebe7ca5694f Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-18soc/mediatek/mt8195: enable ARM64_USE_ARM_TRUSTED_FIRMWAREYidi Lin
Enable ATF configuration to support multi-core. TEST=boot to kernel with multi-core support. BUG=b:177593590 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id1ef29894fa3a6022574c3874dee62617133b12c Reviewed-on: https://review.coreboot.org/c/coreboot/+/53898 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16soc/amd/*/Makefile.inc: Strip the quotesZheng Bao
PSP_SOFTFUSE_BITS used to be like this: 15 0 29 "28 6" It causes internal shell report error: /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file Change-Id: I716f19d37fb57b9ef3fc7259c6dcca7d21022d32 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-16soc/intel/alderlake: Update meminit code due to upd changes FSP 2147 onwardsBora Guvendik
DisableDimmMc0Ch0 upds changed to DisableMc0Ch0 in new FSP releases. The definition of the upd also changed. Changed FSP meminit code to work based on new definition of the UPDs. Before: 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs After: 0:Enable, 1:Disable TEST=Boot to OS Cq-Depend: chrome-internal:3831865, chrome-internal:3831864, chrome-internal:3831913 Cq-Depend: chromium:TODO Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I5af11ae99db3bbe3373a9bd4ce36453b58d62fec Reviewed-on: https://review.coreboot.org/c/coreboot/+/54036 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2162_00Ronak Kanabar
The headers added are generated as per FSP v2162_00. Previous FSP version was v2117_00. Changes Include: - Adjust UPD Offset in FspmUpd.h and FspsUpd.h - Remove DisableDimmMc*Ch* Upds in FspmUpd.h - Add DisableMc*Ch* Upds in FspmUpd.h - Few UPDs description update in FspmUpd.h and FspsUpd.h Change DisableDimmMc*Ch* to DisableMc*Ch* in meminit.c to avoid compilation failure other change related to UPDs name change will be part of next patch in relation chain. BUG=b:187189546 BRANCH=None TEST=Build and boot ADLRVP using all the patch in relation chain. Change-Id: Ic8d7980146f1bfc96472ef504cf9f16eee63a13e Cq-Depend: chrome-internal:3831865, chrome-internal:3831864, chrome-internal:3831913 Cq-Depend: chromium:TODO Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54083 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16sb/intel: Drop outdated SMBus I/O BAR commentAngel Pons
The SMBus I/O bar is not relocated because it's reported to the allocator as a fixed resource. Drop these out-of-date comments. Change-Id: I0149764fd231b3a4e56a5a9b7f4ae61f7954cf7a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-05-16vboot/secdata_tpm: Create FWMP space in corebootAseda Aboagye
This commit has coreboot create the Chrome OS Firmware Management Parameters (FWMP) space in the TPM. The space will be defined and the contents initialized to the defaults. BUG=b:184677625 BRANCH=None TEST=emerge-keeby coreboot Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: I1f566e00f11046ff9a9891c65660af50fbb83675 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
2021-05-16vboot/secdata_tpm: Rename set_space()Aseda Aboagye
The name `set_space()` seems to imply that it's writing to a TPM space when actually, the function can create a space and write to it. This commit attempts to make that a bit more clear. Additionally, in order to use the correct sizes when creating the space, this commit also refactors the functions slightly to incorporate the vboot context object such that the correct sizes are used. The various vboot APIs will return the size of the created object that we can then create the space with. BUG=b:184677625 BRANCH=None TEST=`emerge-keeby coreboot` Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: I80a8342c51d7bfaa0cb2eb3fd37240425d5901be Reviewed-on: https://review.coreboot.org/c/coreboot/+/54308 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16nb/intel/gm45: Guard even more macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Roda RK9 remains identical. Change-Id: Icb9d6e8bdafdac7ad820b1629d04e7bdfbcd4b3f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-05-16mb/google/mancomb: enable DDI0-DP portIvy Jian
Configure DDI-0 connector type to DP. BUG=b:187856682 TEST=Build and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Ic8af14509b0d246c5c2da6e1a48991384471e69f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-14mb/google/volteer: Configure TCSS OC pinsNick Vaccaro
TCSS OC pins have not been correctly configured for volteer. This patch fills the value from devicetree to correct the OC pins mapping. BUG=b:184660529 BRANCH=None TEST="emerge-volteer coreboot chromeos-bootimage", flash volteer2 and verify CpuUsb3OverCurrentPin UPDs get set correctly. Change-Id: I12da755a1d3b9ec3ed0a2dbfb0782313dd49c7e9 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14soc/intel/tigerlake: Allow devicetree to fill UPD related to TCSS OCNick Vaccaro
We need to change OC pin for type C USB3 ports and it depends on the board design. Allowing it to be filled by devicetree will make it easier to change the mapping based on the board design. BUG=b:184660529 TEST="emerge-volteer coreboot" compiles without error. Change-Id: I5058a18b1f4d11701cebbba85734fbc279539e52 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-14mb/google/cherry: Add DRAM calibration supportRex-BC Chen
Initialize and calibrate DRAM in romstage. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.com> Change-Id: Ib7677baef126ee60bf35da3a4eaf720eaa118a27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-05-14mb/google/dedede/var/boten: Modify DPTF parametersStanley Wu
DPTF parameters from thermal team. 1. Modify TSR1 sensor as charge sensor. 2. Modify P-state parameter BUG=b:180641150 BRANCH=dedede TEST=build and verified by thermal team. Change-Id: I43002db61de650d29cd85944a4eaea1b2f99aec4 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52755 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14soc/intel/alderlake: Update CPU and IGD Device IDsMaulik V Vaghela
Updated CPU ID and IGD ID for Alder Lake as per EDS. TEST=Code compilation works and coreboot is able to boot and identify new device Ids. Change-Id: I2759a41a0db1eba5d159edfc89460992914fcc3c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/zork: update DRAM table for berknip/dirinboz/gumbozKevin Chiu
Add Samsung DDR4 memory part K4AAG165WB-BCWE 16Gb index was generated by gen_part_id BUG=b:180986354 TEST=none Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I94b950b51b41767676ab3ddf89e88860c42f5f1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-14mb/amd/majolica: Disable IO ports 0x60/0x64Raul E Rangel
I suspect there is additional initialization required to enable the 8042 keyboard controller on the EC. By removing the range we no longer encounter long 20 second delays when reading the IO ports. Since depthcharge polls the IO ports it makes it seem like depthcharge locked up. BUG=b:182100027 TEST=Boot majolica with depthcharge to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I56a7eb4200e4615e1b4d9f14594d64f93e031a54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-14mb/clevo/n130wu: Use device alias names in devicetreeFelix Singer
Switch to device alias names in devicetree. Remove unnecessary comments since the names are self-explanatory. Change-Id: Id486d9bd44bd7ba6a93a5f757af487b211e58efa Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-14soc/intel/alderlake: Add known GPIO virtual wire informationDeepti Deshatty
GPIO communities 0, 1, and 4 have virtual wire indexes & bits for at least some of their groups; add the known information into the community definitions. This patch is ported form tigerlake. Change-Id: I2f1e2413d06e8afe4233d7111763cb45b78f845b Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14soc/intel/alderlake: Add known CPU Port IDs for GPIO communitiesDeepti Deshatty
Change-Id: Id5fa5b10edeb3445a2d2453d9122376041577598 Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14soc/intel/alderlake: Add IOM PCR PIDDeepti Deshatty
Required for accessing IOM REGBAR space. Change-Id: I883acfa6aa41758e3c8636c94fbee920397fce8b Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/volteer/var/volteer: add specific wifi SAR for voltaSheng-Liang Pan
volta will use different wifi SAR from voxel. Using clamshell mode of fw config to decide to load volta wifi sar. BUG=b:184820057 TEST=build and verify wifi power as expect. Cq-Depend: chrome-internal:3824093 Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I000aefca63346c70556688f232ca54360b3badef Reviewed-on: https://review.coreboot.org/c/coreboot/+/54051 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14src/acpi: Add initial support for HMATJonathan Zhang
Add initial HMAT (Heterogeneous Memory Attribute Table) support based on ACPI spec 6.4 section 5.2.27. Add functions to create HMAT table (revision 2) and create HMAT Memory Proximity Domain Attribute (MPDA) Structure. TESTED=Simulated HMAT table creation on OCP DeltaLake server, dumped the HMAT table and exmained the content. HMAT table and one MPDA structure are added. OCP Delatake server is based on Intel CooperLake Scalable Processor which does not support CXL (Compute Express Link). Therefore solution level testing is not done. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I5ee60ff990c3cea799c5cbdf7eead818b1bb4f9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/brya: Use FW_CONFIG LTE_PCIE to turn on/off the PCIE6Eric Lai
PCIE6 only needed when use the PCIE LTE. BUG=b:180166408 BRANCH=none TEST=FM350 can/can't be detected when enable/disable this config. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9dce05fdb6eb956a054d3815ff706b94f0d3fc37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/brya: Add the first FW_CONFIG fields to brya0Tim Wawrzynczak
1) USB sub-board 2) SD sub-board 3) GSC 4) Keyboard backlight 5) Audio sub-board 6) LTE module Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I74ca5ab5366a17e9e1784ec872b9cd77f8663c7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54097 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14acpi: Add acpigen_write_thermal_zoneRaul E Rangel
BUG=b:186166365 TEST=Compiles Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icf88477143049119036c00276f9a01985dc0b4d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/mancomb: Update HUB_RST_L setting in GPIOIvy Jian
Configure USB HUB_RESET_L gpio to high. BUG=b:187485847 TEST=Build and boot from USB to OS, check the USB function. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I94e4806c7463030df31f8d819510f9533a622f2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-14mb/google/guybrush,mancomb: select GOOGLE_SMBIOS_MAINBOARD_VERSIONIvy Jian
Select GOOGLE_SMBIOS_MAINBOARD_VERSION allows querying board revision from the EC. BUG=b:187904819 TEST=1. emerge-guybrush coreboot chromeos-bootimage 2. flash the image to the device and check board rev by using command `dmidecode -t 1 | grep Version` Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I48dc83d85cfc49e2e4155e389814fce08693c4bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/54084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-14vendor/mediatek: Add MT8195 dram initialization codeRyan Chuang
This is the DRAM initialization code from the reference implementation released by Mediatek for MT8195. The DRAM calibration code can be taken as a standalone library, used by different boot loaders for initializing DRAM and following a different coding style (coreboot was using Linux Kernel coding style), so we have to put it in vendor code folder. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.com> Change-Id: Iada3ec5ae8a39a8e9253caba550c834d486dddcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/54230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-14soc/mediatek/mt8195: Initialize DRAM in romstageRex-BC Chen
Initialize DRAM in romstage and configure to support fast calibration. Change-Id: I89b87be62c8e88ae4a620d56aa7a35e47f97952d Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54229 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14soc/mediatek: Remove duplicate enum declarationRex-BC Chen
Remove dram_cbt_mode in dramc_soc.h. TEST=emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idc4a3887c9cc3f77cbdd7282e2977f6df858817d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
2021-05-14soc/amd/cezanne: Enable GFX HDA FSP UPDKarthikeyan Ramasubramanian
By default, FSP disables the GFX HDA. Enable it to support HDMI Audio functionality. BUG=b:186479763 TEST=Build and boot to OS in guybrush. Ensure that the GFX HDA is enumerated in lspci output. 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1637 Change-Id: I42cb26c44bbca3d937c5d52736c42468139f7b07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54100 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14cbfs: Increase mcache size defaultsJulius Werner
The CBFS mcache size default was eyeballed to what should be "hopefully enough" for most users, but some recent Chrome OS devices have already hit the limit. Since most current (and probably all future) x86 chipsets likely have the CAR space to spare, let's just double the size default for all supporting chipsets right now so that we hopefully won't run into these issues again any time soon. The CBFS_MCACHE_RW_PERCENTAGE default for CHROMEOS was set to 25 under the assumption that Chrome OS images have historically always had a lot more files in their RO CBFS than the RW (because l10n assets were only in RO). Unfortunately, this has recently changed with the introduction of updateable assets. While hopefully not that many boards will need these, the whole idea is that you won't know whether you need them yet at the time the RO image is frozen, and mcache layout parameters cannot be changed in an RW update. So better to use the normal 50/50 split on Chrome OS devices going forward so we are prepared for the eventuality of needing RW assets again. The RW percentage should really also be menuconfig-controllable, because this is something the user may want to change on the fly depending on their payload requirements. Move the option to the vboot Kconfigs because it also kinda belongs there anyway and this makes it fit in better in menuconfig. (I haven't made the mcache size menuconfig-controllable because if anyone needs to increase this, they can just override the default in the chipset Kconfig for everyone using that chipset, under the assumption that all boards of that chipset have the same amount of available CAR space and there's no reason not to use up the available space. This seems more in line with how this would work on non-x86 platforms that define this directly in their memlayout.ld.) Also add explicit warnings to both options that they mustn't be changed in an RW update to an older RO image. BUG=b:187561710 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I046ae18c9db9a5d682384edde303c07e0be9d790 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-05-13mb/google/brya: enable DPTF functionality for bryaSumeet R Pawnikar
Enable DPTF functionality for Alder Lake based brya BRANCH=None BUG=b:188028732 TEST=Built and tested on brya board Change-Id: I33266c85aa30869466034ccbab04a3c7820ae2b0 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-13mb/google/zork/var/shuboz: update USB OC pin mappingKane Chen
modify USB OC pin setting for Shuboz/Jelboz/Jelboz360 Shuboz/Jelboz: usb_port_overcurrent_pin[0] = "USB_OC_PIN_0" # USB C0 usb_port_overcurrent_pin[1] = "USB_OC_PIN_0" # USB A0 usb_port_overcurrent_pin[2] = "USB_OC_PIN_1" # USB A1 usb_port_overcurrent_pin[3] = "USB_OC_PIN_1" # USB C1 Jelboz360: usb_port_overcurrent_pin[0] = "USB_OC_PIN_0" # USB C0 usb_port_overcurrent_pin[1] = "USB_OC_PIN_0" # USB A0 usb_port_overcurrent_pin[2] = "USB_OC_NONE" # NONE usb_port_overcurrent_pin[3] = "USB_OC_PIN_1" # USB C1 BUG=b:182879559 BRANCH=zork TEST=emerge-zork coreboot, validate the OC mapping. Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Icc1fa090109e6be54e2a5f49e364f5502f53aca2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-13vc/mediatek: Align code indent with code flowPatrick Georgi
gcc 11 suspects missing braces here, but it seems the line should be executed in all cases, so unindent it. Change-Id: I7b8cacd48e86284c5145c4e8ffb6add75a743108 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-13src/security/tpm: Deal with zero length tlcl writesPatrick Georgi
While memcpy(foo, bar, 0) should be a no-op, that's hard to prove for a compiler and so gcc 11.1 complains about the use of an uninitialized "bar" even though it's harmless in this case. Change-Id: Idbffa508c2cd68790efbc0b4ab97ae1b4d85ad51 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-13src: Match array format in function declarations and definitionsPatrick Georgi
gcc 11.1 complains when we're passing a type* into a function that was declared to get a type[], even if the ABI has identical parameter passing for both. To prepare for newer compilers, adapt to this added constraint. Change-Id: I5a1b3824a85a178431177620c4c0d5fddc993b4f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-13cpu/amd/pi/00730F01/model_16_init.c: create correct MTRR solutionMichał Żygowski
Create the correct MTRR solution based on the physical address space provided by RESOURCE_ALLOCATOR_V4. Previously CPU initialization did not account for lost C6 DRAM storage MTRR during postcar frame creation. The BSP on 2GB has been stripped from UC MTRR covering C6 DRAM and overlapping with usable DRAM WB MTRR. However this UC MTRR remained on APs which caused inconsistent MTRRs warning in Linux. Use generic MTRR function to create correct MTRR solution that propagates to APs. This also fixes the inconsistent MTRRs warning. TEST=boot Debian with Linux 4.14 on apu2 4GB ECC and apu3 2GB no-ECC Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie2d7a75affd7d3d3a1bc6327fb423e206b28562f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52762 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13nb/amd/pi/00730F01: enable RESOURCE_ALLOCATOR_V4Michał Żygowski
TEST=boot Debian with Linux 4.14 on apu2 4GB ECC and apu3 2GB no-ECC Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0387071748262fdeaa5f4d9a71bb87d4d83241b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52761 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13nb/amd/pi/00730F01/northbridge.c: Report missing resourcesMichał Żygowski
Not all resources were being reported, add them. TEST=boot Debian with Linux 4.14 on apu2 4GB ECC and apu3 2GB no ECC Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ia57ab026218f4aae0a98c2081412c4a9ebb7f57a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52927 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13nb/amd/pi/00730F01: Use generic allocation functions for PCI domainMichał Żygowski
Move the DRAM reporting to read_resoures function before the resources are being set. Use generic PCI domain resource allocation functions to read and set domain resources. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I9605f7fad30eb093bddf9bc34e31dea9f5f846ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/53955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-13mb/google/volteer/variants/copano: Redefine GPIO_EC_IN_RW to GPP_F17Hao Chou
Redefine GPIO_EC_IN_RW to GPP_F17 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I428eb8db34c80d38899a2b823ec7193de4a8f5e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-13mb/google/dedede/var/magolor: Select touchscreen based on SSFC in FW_CONFIGDavid Wu
Select touchscreen(s) based on touchscreen source provisioned in SSFC of CBI (higher 32 bits of FW_CONFIG in coreboot). The reason is to avoid to enable multiple touchscreen ICs with the same slave address. BUG=b:186609348 TEST=build and boot to OS. Change-Id: I087ea677a8865fc8c5b3f7c9773bd7f97924dbb3 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2021-05-13mb/purism/librem_mini: Add libgfxinit supportAngel Pons
Tested on Librem Mini v1 (WHL), both DisplayPort and HDMI 2.0 work. Change-Id: I0da26fef304583eec0375eee2082a9d2ebe27292 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-05-13mb/prodrive/hermes: Disable ACPI S3 and S4 with SPSAngel Pons
Hermes can be used with either CSME or SPS firmware. However, the SPS (Server Platform Services) firmware does not support ACPI S3 and S4 sleep states, and coreboot should not report S3 and S4 as supported. Add a Kconfig option to be selected when building coreboot to use with SPS firmware, which allows disabling ACPI S3 and S4 sleep state support. Change-Id: I9d0fa8530e198e86415f92da6719d2fb0d2401ec Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-13soc/mediatek/mt8195: change vpp_sel default mux for 4k supportNancy.Lin
vpp_sel and ethdr_sel are vdosys clock source select mux. Steps to change to support 4K source. 1. Change vpp_sel source to mainpll_d4 to run at 546MHz 2. Change ethdr_sel source to univpll_d6 to run at 416MHz Signed-off-by: Nancy Lin <nancy.lin@mediatek.com> Change-Id: Ib6518ed6204528489c41e7161534bbd3734ac851 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54082 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/mediatek/mt8195: configure DMA buffer in DRAMRex-BC Chen
Set DRAM DMA to be non-cacheable to load blob correctly. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I819d40431fc7c9e7549686736d9e70de1c1982f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54052 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/mediatek/mt8195: Enable SCP SRAMRex-BC Chen
Enable SCP SRAM to allow module in SCPSYS to access DRAM. TEST=AFE acess DRAM successfully Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I40862f8d74e5aa17361f1c91ea31a10b0a4ffb31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54014 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/amd: factor out acpigen_write_alib_dptc to common codeFelix Held
Also drop unneeded intermediate cast to void * before casting the address of the struct dptc_input type variables to uint8_t *. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie1e2aa1ec728a4e16d3a587d7400cdfc8962f443 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-13soc/amd/cezanne/root_complex: generate DPTC ACPI methodFelix Held
This adds support for convertible devices to support different maximum power and thermal configurations. The dynamic power and thermal configuration (DPTC) via ACPI ALIB calls allows to change the parameters during runtime. This code contains the assumption that \_SB.PCI0.LPCB.EC0.TBMD exists when ACPI code calls the DPTC method. At the moment only chromeec declares EC0.TBMD, but it's also the only code that calls the DPTC method. The definition of DPTC_INPUTS isn't moved to the common code directory, since it's currently unsure if we might need to configure more than those 4 parameters for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibdfc056cb325a32d87505dd93e01c9af81dfd6c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-12soc/amd/cezanne/chip.h: add DPTC and tablet mode optionsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I39218b79a79f1ccaf1a58408c6bb5161acea64aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/54073 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12mb/google/dedede/var/metaknight: Update DPTF parametersDavid Wu
Remove TSR2 and use DPTF parameters from internal thermal team. BUG=b:175938681 TEST=build and boot to OS. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If0ec1ec48b8971efe87f1f8d10332a9c16352122 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raymond Wong <wongraymond@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-05-12mb/google/guybrush: Configure wake resource for WiFiKarthikeyan Ramasubramanian
In order to support wake on WLAN events, configure the wake resource. BUG=b:186011392 TEST=Build and boot to OS in guybrush. Ensure that WiFi power resource is added to SSDT. Device (\_SB.PCI0.GP20.WF00) { Name (_UID, 0x38B82CBC) // _UID: Unique ID Name (_DDN, "WIFI Device") // _DDN: DOS Device Name Name (_ADR, 0x0000000000000000) // _ADR: Address } Scope (\_SB.PCI0.GP20.WF00) { Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x08, 0x03 }) } Change-Id: Ic238d9606aea20c058e9b47093693f10b14e6288 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-12psp_verstage: remove not-implemented files for cezanneKangheui Won
Cezanne PSP is missing implementations for some svc apis. Do not include files related to missing svc apis. This CL should be reverted after the cezanne PSP supports these functions. BUG=b:187906425 Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ibaab4e8435624d403ef18e980146ebfd1598b61b Reviewed-on: https://review.coreboot.org/c/coreboot/+/53905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-12src/security/intel/stm: Add warning for non-reproducible buildMartin Roth
Because the STM build doesn't use the coreboot toolchain it's not reproducible. Make sure that's displayed during the build. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I3f0101400dc221eca09c928705f30d30492f171f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-12mb/google/guybrush,mancomb: Adjust GBB size to 12KBMartin Roth
The 448KB size of the GBB is larger than is needed, so adjust it down to the minimum size needed. BUG=b:186761897 TEST=Build & Boot guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7a24945cd9ecc8872871f57b09ca71fc40e92473 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-12vc/amd/pi/00660F01: Remove unused code and directoryMichał Żygowski
This is some leftover omitted during 00660F01 removal, since corresponding CPU and northbridge code is not present in the tree already. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ib7ccbc088766b5a4f59c47bd48790c6a2af8ca61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-12mb/google/octopus/var/phaser: add audio codec into SSFC support for PhaserKevin Chang
Add audio codec module RT5682 in project and define GPIO_137 in the override_table for SSFC framework to adjust IRQ configuration. BUG=b:182221327 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682I or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I202f71f57ad2db84fb90b52f9ffd7a1fd05494a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-05-12nb/amd/pi/00730F01: Use generic allocation functions for northbridgeMichał Żygowski
Remove obsolete resource assigning functions. IO and MMIO address registers are currently set by amd_initcpuio to cover whole PCI hole under 4G to MMIO and IO 0x0000-0xFFFF is configured to be routed to southbridge already. Use generic PCI and resource allocation functions wherever possible to set northbridge resources. TEST=boot Debian with Linux 4.14 on apu2 4GB ECC and apu3 2GB no ECC Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I8dd5e40bce513c5ba7f1d42a06e7ab0846666942 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-12mb/google/volteer: Create chronicler variantSheng-Liang Pan
Create the chronicler variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:187318819 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_CHRONICLER Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Iebfea87b7c4cfc2a83e88a6c479a0842774ae018 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-05-12mb/intel/adlrvp_m: Program CPU PCIE RP GPIOs in early GPIOBora Guvendik
We need to configure CPU PCIE root port related gpios in early boot block stage for CPU root ports to work due to the dependency on FSP-M PCIe configuration. Since we're removing this programming from FSP, coreboot needs to take care of programming this GPIOs. Also we need to enable virtual wire messaging for native gpios for CPU PCIE root ports. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I27c898943471d834bd82e3c7e8b36cceb12de099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52865 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12mb/google/octopus/var/fleex: Add cs42l42 HSBIAS settingIan Feng
Disable HSBIAS sense setting. BUG=b:184103445 TEST=boot to check cs42l42 is functional. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I12c0e0a0f7490d35d36fe8ccbc940f29e1bb7976 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-12drivers/i2c/cs42l42: Make HS_BIAS_SENSE_EN optionalVitaly Rodionov
HSBIAS_SENSE_EN configures HSBIAS output current sense through the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce the potential pop noise during the headset plug out slowly. But on some platforms ESD voltage will affect it causing test to fail, especially with CTIA headset type. For different hardware setups, a designer might want to tweak default behavior. Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Change-Id: I87c6f01af1bdb5b1cb8e399191519598d7fbe9ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/52981 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12include/console: Fix FSP Notify phase postcodes discrepancySubrata Banik
List of changes: 1. Make the FSP notify phases name prior in comments section. 2. Fix discrepancies in FSP notify before and after postcode comments. 3. Add FSP notify postcode macros for after pci enumeration(0xa2) and ready to boot(0xa3) call. Change-Id: Ib4c825d5f1f31f80ad2a03ff5d6006daa7104d23 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52894 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12include/console: Rename and update POST_ENTRY_RAMSTAGE postcodeSubrata Banik
Rename and update POST_ENTRY_RAMSTAGE postcode value from 0x80 to 0x6f to make the ramstage postcodes appear in an incremental order. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I60f4bd8b2e6b2b887dee7c4991a14ce5d644fdba Reviewed-on: https://review.coreboot.org/c/coreboot/+/52947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-12include/console: Fix duplicate entry of postcode 0x79Subrata Banik
Change POST_PRE_HARDWAREMAIN postcode value from 0x79 to 0x6e to avoid duplicate entry. Change-Id: I50cc75cd3097fba3e7faff05188511bba69ef1e7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-12mb/intel/adlrvp: Fill CmdMirror and DqDqsRetraining for ADLRVPMaulik V Vaghela
ADL-M LP4 RVP has command mirror enabled and we need to fill correct value of this UPD to pass the MRC. Also, Value of TxDqDqsRetraining is set to 1 by default and we need to disable it for only ADL-M LP5 RVP. BUG=None BRANCH=None TEST=UPD values has been pass correctly and MRC passes on LP4/LP5 board Change-Id: I3e16b9a3d3e6a92dacba9d38782df408596ed5e1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-12mb/google/dedede/var/boten: Probe and enable amplifier operation modeStanley Wu
Probe the fw_config for RT1015 speaker amplifier operation mode and enable it accordingly in the device tree. BUG=b:180570923 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Change-Id: I756bfa6f604ed320de9a515821979aa95c869ebf Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-12mb/google/dedede: Add GPIO and SPD for pirika supportKirk Wang
Add support for GPIO and SPD driver for pirika BUG=b:184157747 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Change-Id: Id367a83b04aad62b7deabae99b3f91905a2fc46c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-12soc/amd/{common,picasso}: Use common PCIE_GPP_DRIVER driverRaul E Rangel
This will change the names of the GPP bridges, but this ok since there is no hand written ASL that references these names. BUG=b:184766519 TEST=Boot picasso and dump ACPI Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic09200156e8a37bd1a29ca95a17c8f8ae2b92bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54028 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12soc/amd/common/block/pci: Capitalize PCI ACPI namesRaul E Rangel
Lowercase characters are not valid ACPI identifiers. BUG=b:184766519 TEST=Boot picasso to OS and verify ACPI errors are no longer printed. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I75aca67f4607e97ced8ac00ac68e51c359aff944 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-12soc/amd{common,cezanne}: Move pcie_gpp.c to commonRaul E Rangel
Cezanne and Picasso can now use the same driver. BUG=b:184766519 TEST=Boot guybrush and dump ASL. Verified it didn't change. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie4ede82935d6c69b323c1fdceaa61e306aa2820a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-11docs: correct and rewrite documentation regarding n/c / unused padsMichael Niewöhner
Intel PDGs starting from Skylake / Sunrise Point state that, different from the general recommendation in digital electronics, unconnected GPIOs defaulting to GPIO mode do explicitly not require termination. The reason for this is, that these GPIOs have the `GPIORXDIS` bit set, which effectively disconnects the pad from the internal logic by disabling the input buffer. This bit - besides `GPIOTXDIS` - can also be set explicitly by using the gpio macro `PAD_NC(pad, NONE)`. In some cases, a pull resistor may be required due to bad board design or when a vendor sets the RX/TX disable bits together with a pull resistor and schematics are not available to check if the pad is really unconnected or just unused. In this case the pull resistor should be kept. Pads defaulting to native functions usually don't need special handling. However, when pads requiring external pull-ups are missing these due to bad board design, they should be configured with `PAD_NC` to disconnect them internally. Rewrite the documentation to reflect these new findings. Also clarify the comment in soc/intel gpio code accordingly. Change-Id: Id01b197ebe8f2b8bb4ecf3d119ec2298b26d9be0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52139 Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:51:19 +0000