summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-09-26cpu/amd/pi/00730F01: Clean up microcode update from __PRE_RAM__Kyösti Mälkki
It is only called in ramstage. Even if it was called in romstage, execution flow is such that BSP and AP CPUs should not be able to enter update_microcode() routine concurrently. Also the Kconfig guarding the spin_lock() calls are not selected nor are the lock variables declared for these platforms. Change-Id: I1c2e106f10e8420e942b3ed082c677c0db95557c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35586 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-25soc/fsp_broadwell_de: fix flashconsole support for platformMatt DeVillier
CB:29633 switched platform to use sb/common spi implementation, which worked until CAR_GLOBAL was removed in CB:30506. Revert the changes back to usage of CAR_GLOBAL in the common spi driver so that flashconsole will work again in romsatge for fsp_broadwell_de. Test: verify flashconsole functional on out-of-tree Broadwell-DE board Change-Id: I72e5db1583199b5ca4b6ec54661282544d326f0f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
Add the configuration 'Juniper' for the new mainboard. BUG=b:137517228 TEST=make menuconfig; select 'juniper' and build Change-Id: I94e3ac7f6de3fecf177e344cb217eaecf6362d69 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-25mb/google/hatch: Move SOC_INTEL_COMETLAKE selection to KconfigFurquan Shaikh
All variants of hatch are using Comet Lake and so the selection can be done in Kconfig without requiring each variant to do the same. Change-Id: Ief34296334ede5ba0f5f13381e92427ccc440707 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Andrew McRae <amcrae@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-25mb/siemens/mc_apl1: Sort the names of all variant mainboardsWerner Zeh
Sort the names of all variant mainboards in an ascending order. Change-Id: I19d502298744c0e0cbc91eb836c62ca90cdb9a5c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-25mb/siemens/mc_apl{2,4,5}: Enable VBOOTWerner Zeh
Enable VBOOT in Kconfig and provide a flashmap that includes all the needed sections for VBOOT support. Change-Id: I3d58094256d2730dbd249291a8f1ed8df9dfe62d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-25soc/intel/(apl,skl,cnl,common): Move mkhi_hdr structure definition to commonSridhar Siricilla
Removed mkhi_hdr structure definition from multiple SOCs, and moved to common. TEST=Built code for Hatch, apollolake boards. Change-Id: Ifeba0ed4d98975049179d1b47fb22c06a927dc29 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35545 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24intel/cpu: Switch older models to TSC_MONOTONIC_TIMERKyösti Mälkki
The implementation of udelay() with LAPIC timers existed first, as we did not have calculations implemented for TSC frequency. Change-Id: If510bcaadee67e3a5792b3fc7389353b672712f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34200 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24cpu/intel: Use CPU_INTEL_COMMON_TIMEBASEKyösti Mälkki
Change-Id: I0e7159039751a88d86b6c343be5f085e6e15570a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-24intel/socket_mPGA604: Enable TSC_CONSTANT_RATEKyösti Mälkki
We can use intel/common implementation for tsc_freq_mhz(). Change-Id: I728732896ad61465fcf0f5b25a6bafd23bca235e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34199 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24cpu/intel/common: Fix invalid MSR accessKyösti Mälkki
Fix regression from commit ecea916 cpu/intel/common: Extend FSB detection to cover TSC MSR_EBC_FREQUENCY_ID (0x2c) was not defined for affected CPU models and rdmsr() caused reset loops. Implementations deviate from public documentation. Change to IA32_PERF_STATUS (0x198) already used in i945/udelay.c to detect FSB to TSC multiplier. Change-Id: I7a91da221920a7e7bfccb98d76115b5c89e3b52e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-24Add Razer Blade Stealth (2016) H2UJohanna Schander
The Razer Blade Stealth H2U is a KabyLake System using: - Intel KBL 7500U - ITE8528E SuperIO - Intel 600P Series NVMe SSD - Either four MT52L1G32D4PG (16GB) or MT52L512MB32D4PG (8GB) of soldered memory in dualchannel mode - (Optional) Touchscreen - HDMI 2.0a via DP-1: Paradetech PS175 - AlpineRidge Thunderbolt 3 controller - TPS65982 USB-PD power switch / multiplexer Even though it has a 16MB chip equipped (W25Q128.V) only the first 8MB are used and mapped via IFD. The rest is left empty (0xFF). The flash is not secured in any way and can be read via flashrom. It should be the source for this port's IFD and ME blobs. Working: - USB-A Ports left and right - Speakers - Touchscreen (USB) - Onboard Keyboard in Linux - NVMe SSD - SeaBIOS, Tianocore and Grub Payloads - Webcam - Powersaving Modes - Battery state and LID switch, sometimes slow to update. - Touchpad (I2C-HID) - Headphones Not part of this commit: - Thunderbolt / USB-C (Requires advanced EC signaling) - Full HDMI support (Currently requires plugged connection at boot) Change-Id: I7ede881d631e1863f07f5130f84bc3b8ca61a350 Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2019-09-24device/mmio.h: Add bit field helpersHung-Te Lin
When accessing register with multiple bit fields, the common approach is to use clrsetbits_le32, for example: clrsetbits(&reg, (1 << 0) | (0x3 << 1) | (0x7 << 10), (1 << 0) | (0x1 << 1) | (0x5 << 10)); This hard to maintain because we have to calculate the mask values manually, make sure the duplicated shift (offset) was set correctly. And it may be even worse if the value to set will be based on some runtime values (that many developers will do a if-block with two very similar argument list), and leaving lots of magic numbers. We want to encourage developers always giving field names, and have a better way of setting fields. The proposed utility macros are: DEFINE_BITFIELD(name, high_bit, low_bit) EXTRACT_BITFIELD(value, name) WRITE32_BITFIELDS(addr, name, value, [name2, value2, ...]) READ32_BITFIELD(addr, name) Where a developer can easily convert from data sheet like BITS NAME 26:24 SEC_VIO Into a declaration DEFINE_BITFIELD(SEC_VIO, 26, 24) Then, a simple call can set the field as: WRITE32_BITFIELDS(&reg, SEC_VIO, 2); That is much easier to understand than clrsetbits_le32(&reg, 0x7 << 24, 0x2 << 24); And to extract the value: READ32_BITFIELD(&reg, SEC_VIO) That is equivalent to: (read32(&reg) & 0x3) >> 24 Change-Id: I8a1b17142f7a7dc6c441b0b1ee67d60d73ec8cc8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35463 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24mainboard/ocp/monolake: Hide internal NICAndrey Petrov
Disable root port IOU0 to which built-in NIC is attached. TEST=on OCP monolake, hide built-in NIC and make sure OS does not report built-in NIC Change-Id: I2384e7dd073355f0ced2902ac2d8418996b1c5aa Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-24soc/fsp_broadwell_de: Add devhide functionalityAndrey Petrov
Add function to hide IIO PCIe root ports. TEST=On OCP Monolake, hide built-in NIC PCIe root port [0.2.2 and 0.2.3] and make sure OS does not detect built-in NIC. Change-Id: I2fcac5b7d9a7a52a2801c010bfccf247f2a44581 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-24emulation/qemu-i440fx: use fw_cfg_dma for fw_cfg_readHimanshu Sahdev
- configure DMA fw_cfg - add support to read using fw_cfg_dma - provide fw config version id info in logs BUG=N/A TEST=Build and boot using qemu-i440fx. Change-Id: I0be5355b124af40aba62c0840790d46ed0fe80a2 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-24mb/google/kohaku: Update DPTF parameters and TCC offset settingSeunghwan Kim
This change applies fine-tuned DPTF parameters and TCC offset setting for kohaku. Also enables EC_ENABLE_MULTIPLE_DPTF_PROFILES for tablet mode. BUG=b:137688474 BRANCH=none TEST=built and verified the setting values Change-Id: I92e268b2e07ca5a04e29bda84ddb8fc21eb23251 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-09-24mediatek/mt8183: Use different DRAM frequencies for eMCP DDRHuayang Duan
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbps) while those with discrete DRAM can only run at 3200Mbps. This patch enables 3600Mbps for eMCP DDR for better system performance. BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test passes on Kukui Change-Id: Iab6a9c2c390feeb9497b051a255b29566909e656 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-23vendorcode/cavium: Replace use of __PRE_RAM__Kyösti Mälkki
Change-Id: I7c93031c8c0e3a86261988edc956e8cd5a8dd961 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34998 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-23lib/trace: Replace __PRE_RAM__ useKyösti Mälkki
Change-Id: I957be92594aced2e8465e7f94d8d42e44c3418d7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35399 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-23mb/up/squared: Fill LPDDR4 dimm infoPatrick Rudolph
Fill the dimm info struct to make SMBIOS type 17 appear. TESTED=Up Squared Change-Id: I4de63362c8fea8a886594cdcf0eec48421afb605 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34564 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-23lib/fmap: Cache FMAP in cbmemPatrick Rudolph
For platform independend exposure of FMAP through a kernel module cache the FMAP in CBMEM. In addition add a pointer in coreboot tables pointing to the introduced CBMEM area. To not waste the allocated DRAM, use the cached CBMEM in RAM enabled stages if possible. Tested on qemu using https://github.com/9elements/linux/commits/google_firmware_fmap2 Tested on QEMU and Supermicro X11SSH-TF. Change-Id: I4e01c573c3edfa34dbba5fe7604d4f6e18b584d5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-22mb/gigabyte/ga-h61m-s2pv: Improve LPC decodingAngel Pons
Drop unused CNF2_LPC_EN, as there is no device which uses IO 0x4e/4f. Do not use the mainboard model to set COMA_LPC_EN. Make use of NO_UART_ON_SUPERIO instead, as it is more future-proof. Change-Id: Iac49250b0f509a42012f82db8aa85ba85559c66f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-22mb/mainboard/hatch: add spd: 8G_3200 for AkemiPeichao Wang
BUG=b:140545732 TEST=build bios and spd index set to 6, verify DUT bring up normally Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I337b0bdcd37a9c4baacccbc6786968031a41b31e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35511 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/ocp/monolake: Add vboot RO only supportPhilipp Deppenwiese
Change-Id: I28a21d64e2781af294670a94c1fc88fb81e80f9e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35492 Reviewed-by: Andrey Petrov <anpetrov@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/google/hatch: Add G2Touch Touchscreen supportWisley Chen
Add G2Touch Touchscreen support for dratini BUG=b:141281841 TEST=emerge-hatch coreboot chromeos-bootimage, and check touchscreen work. Change-Id: I0dbde7f8396da6335b22aeb4a9703336e2b862b8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-22mb/facebook/watson: Enable vboot for measurementsPhilipp Deppenwiese
Signed-off-by: Philipp Deppenwiese <philipp.deppenwiese@9elements.com> Change-Id: I8287d475301aaaae736df9cc95fcd18cc04b40fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/35232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2019-09-22sb/intel/i82870: Drop unused fileKyösti Mälkki
Change-Id: I024805769ad05f995a23669a82f5482ce3e7ae70 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-22device/cardbus: Remove unnecessary bridge_ctrl bitmaskKyösti Mälkki
The bits PARITY and SERR are set unconditionally below. Change-Id: I03f53fe7f436f8feed7b34756439077f02a85565 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/cardbus: Fix use of PCI_CB_BRIDGE_CONTROLKyösti Mälkki
Read-modify-write needs to access the same register. Numerically both used defines are 0x3e, while register implementations are not identical but only similar. Change-Id: I9348b855320f86868e2d3ef76d3b8d7a4ab7fae0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/pci: Replace add with bitwise-orKyösti Mälkki
Change-Id: I9fbefac3bef7425d6f5ea1bcc01eb21485315c36 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-22mb/supermicro/x11ssh: remove unnecessary fsp setting CdClockMichael Niewöhner
CdClock does not need to be set because the board does not use IGD. Change-Id: I6835ccdf80530f9efc6fdeb0363dcf9267f99d21 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-22soc/intel/skylake: lock down TCO on pch finalizeMichael Niewöhner
Change-Id: I5bd95b3580adc0f4cffa667f8979b7cf08925720 Signed-off-by: Michael Niewöhner <michael.niewoehner@8com.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-09-21soc/fsp_broadwell_de: Move function to get CPUBUSNO(1) into common fileAndrey Petrov
Change-Id: I189eb8ffce2f0735ad9ba603b1d96786aa00fafb Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-21mb/ocp/monolake: Implement bank/locator schemeAndrey Petrov
Implement Locator and Bank fields (as reported by dmidecode) to match vendor BIOS. TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches expectation. Change-Id: Ia271ff1e596ba469cf42e23d8390401c27670a27 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-21soc/fsp_broadwell_de: Use DIMM numbers relative to channelAndrey Petrov
Currently "DIMM numbers" increase monotonically for all the channels. However, commonly DIMMS are numerated on per-channel basis. This change makes numeration match the convention. TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches expectation. Change-Id: I3e7858545471867a0210e1b9ef646529b8e2a31c Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35318 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-21soc/amd/picasso: Use new common SPI codeRichard Spiegel
Use the new SPI code from common folder, delete spi.c. SPI related macros must be single defined, in southbridge.h if they are used by files other than the common SPI code, fch_spi.h if they are only used by the common SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h, because it can change between SOC. BUG=b:136595978 TEST=None, code already tested with grunt. Change-Id: I68008ce076d348adbdabf7b49cec8783dd7134b4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-21soc/amd/stoneyridge: Use new common SPI codeRichard Spiegel
Use the new SPI code from common folder, delete spi.c. SPI related macros must be single defined, in southbridge.h if they are used by files other than the common SPI code, fch_spi.h if they are only used by the common SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h, because it can change between SOC. BUG=b:136595978 TEST=Build and boot grunt using new SPI code, with debug enabled. Check output. Change-Id: I639973d993316a10daa7564462e689b2c183f536 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-21soc/amd/common/block: Create new SPI codeRichard Spiegel
Create a new SPI code that overrides flash operations and uses the SPI controller within the FCH to its fullest. Reference: Family 15h models 70h-7Fh BKDG revision 3.06 (public) BUG=b:136595978 TEST=Build and boot grunt using this code, with debug enabled. Check output. Change-Id: Id293fb9b2da84c4206c7a1341b64e83fc0b8d71d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-21drivers/wifi/generic.c: Upper case the AML WiFi name as required by specAndrew McRae
ACPI 6.3, ASL 20.2.2 (Name Objects Encoding) states: LeadNameChar := 'A'-'Z' | '_' NameChar := DigitChar | LeadNameChar Hence, the Intel WiFi names generated in ASL are required to be upper-cased letters. BUG=b:141206986 TEST=Reflash and confirmed SSDT table has correct name. Change-Id: I803b9bc81804eec7bd5220b9dbc6ddd0bb0ecbcc Signed-off-by: Andrew McRae <amcrae@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35466 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-21vboot: extend BOOT_MODE_PCR to SHA256 bank on TPM2Andrey Pronin
With the support of various algorithms and banks in tlcl_extend(), digest_algo parameter of tpm_extend_pcr() started defining the target PCR bank in TPM2 case. The OS expects coreboot to extend the SHA256 bank of BOOT_MODE_PCR. The value that the OS expects coreboot to extend into BOOT_MODE_PCR is the SHA1 digest of mode bits extended to the length of SHA256 digest by appending zero bytes. Thus the correct value for digest_algo passed into tpm_extend_pcr() for BOOT_MODE_PCR is TPM_ALG_SHA256. This didn't matter until adding the support for multiple digest introduced by patches like https://review.coreboot.org/c/coreboot/+/33252, as tlcl_extend always used SHA256 bank before. Change-Id: I834fec24023cd10344cc359117f00fc80c61b80c Signed-off-by: Andrey Pronin <apronin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35476 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20sb/intel/common/fw: Make make aware that it needs binariesNico Huber
As we redirect all `dd` output to /dev/null (it would clutter the console otherwise), there is no error message if a binary to be added isn't found. If we add them as dependency, OTOH, `make` will complain properly. Change-Id: I40c3979b84341cb88c7e9a5084c1a97230ea5503 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33327 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20mediatek/mt8183: Support more DRAM frequency bootupHuayang Duan
Add more DRAM frequency bootup to support DRAM frequencies 1600Mbps, 2400Mbps, 3200Mbps and 3600Mbps. BUG=b:80501386 BRANCH=none TEST=Memory test passes on eMCP platform Change-Id: Ic1378ca43fb333c445ca77e7dc0844cdf65f2207 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-20mediatek/mt8183: Implement the dramc init settingHuayang Duan
This patch implements the dram init setting by replacing the hard-coded init sequence with a series of functions to support calibration for more frequencies. These functions are modified from MediaTek's internal DRAM full calibration source code. BUG=b:80501386 BRANCH=none TEST=1. Kukui boots correctly 2. Stress test (/usr/sbin/memtester 500M) passes on Kukui Change-Id: I756ad37e78cd1384ee0eb97e5e18c5461d73bc7b Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-20mb/supermicro/x11ssh-tf: correct CBFS_SIZEMichael Niewöhner
The specified CBFS_SIZE does not make sense. The boards BIOS region is 0xb00000. Correct the value. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ia3014c7fd081030607790ced6bb55323086f1161 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35458 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20soc/qualcomm/ipq40xx: Remove unnecessary allocationJacob Garber
The bus variable doesn't live outside the scope of this function, and is only used as a convenient way for passing the pointers to all the sub-functions, so it doesn't need to be allocated. Put it on the stack instead. A similar fix for ipq806x was done in 0f33d8c29a (soc/qualcomm/ipq806x: Remove unnecessary allocation). Change-Id: Ibb1129b92e38a105e100f59e03d107de340b925c Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294801 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-20nb/intel/nehalem: Enabled VBOOT supportPatrick Rudolph
Tested on Lenovo T410. Change-Id: I86100be79bf2337d65b688edba34b87f3ac18cb6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-20soc/intel/common/intelblocks: Remove PAD_CFG_GPI_GPIO_DRIVER_SCITim Wawrzynczak
Intel's EDS says "1 = GPIO Driver Mode. GPIO input event updates are limited to GPI_STS. GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS updates are masked." Therefore, the GPI_GPIO_DRIVER_SCI option for pad configuration is meaningless, as any GPE will be masked if the GPIO driver is set as owner. Change-Id: Ia0cd0041dfc985cbe388cb89a4026038c7fb4383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35460 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configurationTim Wawrzynczak
A closer read of the EDS indicates that when GPIO Driver mode is selected, GPIO input event updates are limited to GPI_STS only. GPI_GPE_STS updates are therefore masked, and we don't want to enable this behavior. It masks the GPE and does not allow us to see this GPE as a wake source, obscuring the reason that the system woke up. Also switch the IRQ from level-triggered to edge-triggered, otherwise the system will auto-wake from any sleep state when the pen is ejected from the garage. BUG=b:132981083 BRANCH=none TEST=Wake up system from S0ix using pen eject, verify that mosys eventlog shows GPE#8 as the S0ix wakeup source. Wake up system from S3 via pen eject, and verify that the wakeup source shows as GPE#8. Change-Id: If017e12e23134f5cfed7cbb6047cc9badd9bf7e8 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35459 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20mb/google/hatch: override smbios manufacturer name from CBIWisley Chen
BUG=none TEST=emerge-hatch coreboot, use ectool to write oem name in CBI, and checked smbios manufacturer name. Change-Id: I9be85fbc47031d049b5bd51cfaf6232cab24e9fe Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-19sb/intel/ibexpeak: Add define for PRSTS registerAngel Pons
Change-Id: Ia9a6b0c7f2a07796f850acd2349067ba5e5eb735 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-19mb/google/drallion: add sku id base on sensor detectionEric Lai
Implementing logic base on sensor detection to determine SKU id. BUG=b:140472369 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5e71ae6b97378b78055735bbf4b6b55ffe38b978 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35366 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19mb/google/drallion: Add memory init setup for drallionThejaswani Putta
This implementation adds below support 1. Add support to read memory strap 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I9993ad175e6f52711d5a05733aeab1bbed1e0b80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-19cpu/intel/common: Extend FSB detection to cover TSCKyösti Mälkki
Use the same CPUID switch block to resolve the multiplier to derive TSC from FSB/BCLK frequency. Do not return 0 as base frequency. Change-Id: Ib7f1815b3fac7a610f7203720d526eac152a1648 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31340 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19cpu/x86/lapic: Refactor timer_fsb()Kyösti Mälkki
Common apic_timer code in cpu/x86 should not depend on intel header files. Change-Id: Ib099921d4b8e561daea47219385762bb00fc4548 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34091 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19cpu/intel/common: Add CPU_INTEL_COMMON_TIMEBASEKyösti Mälkki
To add a common tsc_freq_mhz() implementation, we need to guard againts soc-specific duplicate definitions. Change-Id: I37a34651d9e7d823ad5689d30739294358a97e31 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31341 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19cpu,mb,soc: Init missing lb_serial struct fieldsJacob Garber
Initialize the input_hertz and uart_pci_addr fields of the lb_serial struct to prevent later undefined reads in lb_add_serial(). This was done for exynos5420 in commit ff94e00362 (soc/samsung/exynos5420/uart.c: Init new serial struct variables), and this patch finishes the rest. Note that not all of the drivers can have the UART PCI address configured at build time, so a follow-up patch will be needed to correct those ones. Change-Id: I733bc8185e2f2d28a9823495b53d6b09dce4deb1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1354778 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34548 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19src/soc/intel/common/block/cse: Add hmrfpo related functions to cse libSridhar Siricilla
Below new functions are added: * send_hmrfpo_enable_msg() - Sends HMRFPO Enable command to CSE. This API sets ME in SEC_OVERRIDE mode. The mode prevents CSE to execute SPI I/O cycles to CSE region, and unlocks the CSE region to perfom updates to it. * send_hmrfpo_get_status_msg() - Sends HMRFPO Get Status command to CSE TEST=Verified sending HMRFPO_ENABLE & HMRFPO_GET_STATUS HECI commands on CML RVP & hatch board Change-Id: I559bc4641e12df7ed39b1c97097bf068f9a232db Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
Add DPTF based thermal control for ambient sensor for CML based Helios system. Also, update other sensor names information. BUG=b:139335207 BRANCH=None TEST=Build and Boot on Helios board and check all sensor details. Change-Id: I322d53536fbdf6db70f5a24afb322d9f206eaeac Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
Update DPTF thermal temperature threshold values for CML based Helios system. This updates CPU active cooling temperature threshold to appropriate values which addresses the issue of running the Fan at lower CPU temperature as per bug. Also, added active cooling temperature thresholds for other TSR sensors. BUG=b:141087272 BRANCH=None TEST=Build and boot on Helios board to check the fan functionality. Change-Id: I5c8502f8c9e6121c18024d2a8d5a4f7680797b8d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35446 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18cpu/via/nano: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: Iea51a480fd7c696a6bbccc0b668acdbff6abffb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34203 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18cpu/qemu-x86: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I72afb0c0d34157d1d2d9fe4ae6704cd2502f724d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34202 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18x86emu: Drop UDELAY_LAPIC dependencyKyösti Mälkki
It won't build though, since current_time_from() has been removed. Change-Id: I2f7788f626c0504e6354a08b7986e4d18be140a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34201 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/supermicro/x11ssh: drop plus sign/text in nameAngel Pons
There is no board named X11SSH+-TF. Change-Id: Ide01a8d59c09747dfe7d59fd9e17bd5194fb14e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-09-18mb/google/octopus/variants/garg: add LTE sku to config power sequenceKevin Chiu
Add SKU#18 to config power sequence below: GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:134854577,b:137033609 BRANCH=octopus TEST=build Change-Id: I58e07518f6daaf608684c9fa1b1c88fc592ea117 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/drallion: Add SPD files for drallionAmanda Huang
This change adds SPD files for Drallion. Use spd_index matrix to correspond mem_id. This can save the dummy spd index to reduce the size of SPD.bin. BUG=b:139397313 TEST=Compile successfully Change-Id: I2f7e75fdbca4183bcd730e40fef4bfe280ab900b Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35346 Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/drallion: Enable 360 sensor detectionBernardo Perez Priego
Implementing logic to detect SKU model and enable ISH accordignly. BUG=b:140748790 Change-Id: I22fafb43dce6545851883be556a02d65a01fc386 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35303 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/drallion: Update gpio config for drallionVarun Joshi
Source: Pin Schematics BUG=b:139370304 Signed-off-by: Varun Joshi <varun.joshi@intel.com> Change-Id: I78f85a266eb42ea186ff896db5cde0a347339a71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35175 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18sb/intel/ibexpeak: Remove superfluous linked filesArthur Heymans
../bd82x6x/early_usb.c: While ibexpeak needs an equivalent of this code, it is not currently hooked up. ../common/gpio.c: Already linked in common/Makefile.inc Change-Id: I980601e2302f2c412e823fef5fb9a69b9e151322 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35437 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17superio/common: Fix types in printfPatrick Georgi
Found by Coverity Scan #1405310 Change-Id: I53146e7fc402500effc63ce276ecfce4d72a4f7f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35433 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17mb/lenovo/t430s: Open PCIe port #5 for Thunderbolt controllerBill XIE
Some T430s variants have a Thunderbolt controller wired to PCIe port The controller hotplugs itself to the chipset when a downstream device is hotplugged into it, so the hotplug capability should be enabled on PCIe port #5. TODO: find the correct gpio pin to detect the Thunderbolt controller at runtime. There are 3 variants of mainboard for Thinkpad T430s: Basic type (Wistron LSN-4 11263-1), Boards with an additional discreet GPU, Boards with an additional TB controller (Wistron LSN-4 11271-1), each of which has a different schematic. The gpio27 on the last type is set as set as GPIO-INPUT, compared with GPIO-OUTPUT-HIGH on the basic type boards. Change-Id: I61f41db100f398069e50e2da8a378b3a8d1c84bf Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-17cpu/intel/model_2065x: Don't redefine CPU_ADDR_BITSArthur Heymans
This Kconfig symbol is set at a default of 36 in cpu/x86 and is now only used in the romcc bootblock to set up caching to upgrade the microcode. It's not mainboard specific. Change-Id: I29d3a8308025e586a823603f8d6edafd30cb9d95 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35436 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17nb/nehalem: Move MMCONF_BASE_ADDRESS to a common placeArthur Heymans
Change-Id: I872959c4a38e28c29220b81c9fe029e7fc553ccf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35435 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17security/vboot: Fix regression with VBOOT_STARTS_IN_ROMSTAGEKyösti Mälkki
Fix regression after commit 21160a7 Add definition for ENV_ROMSTAGE_OR_BEFORE to <rules.h> Builds with VBOOT_STARTS_IN_ROMSTAGE=y would evaluate ENV_ROMSTAGE_OR_BEFORE incorrectly for verstage-class. Follow-up changes for CBMEM console and timestamps, where defined(__PRE_RAM__) tests are replaced, are likely to have caused regressions such that VBOOT console and timestamps are missing. Change-Id: Idc274409c495efea95eeecd0538b2f8b847970ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-17binaryPI: Drop PSP Secure OS from buildKyösti Mälkki
For pcengines/apu2 variants we do not even send DRAM ready message to PSP. Possibly some GFX/DRM depends of running PSP but these devices are headless. And we don't support fTPM inside PSP either. Reduces blob footprint in SPI from 466 KiB to 234KiB. Change-Id: I803722171cba9b3601fb0b4a2c0e984566f435ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-09-17binaryPI: Move Hudson firmware higher in CBFSKyösti Mälkki
Move it above 'AGESA' to increase the maximum continuous free space in CBFS from 5.3 MiB to 5.8 MiB. Also fixes build for cases where CBFS_SIZE < ROM_SIZE, thus allowing FMAP regions. NOTE: Due to off-by-one error in binaryPI, offset 0xFFFA0000 that amdfwtool advertises fails for xHCI firmware loading. Change-Id: Ic78520f4248f0943769e66a8825911c0ddcc368c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-09-17binaryPI: Refactor Makefile for PSP directoryKyösti Mälkki
Change-Id: I3c2d528519ac26b24159a46400f232d6acd629e9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-09-17google/kukui: Pass reset gpio parameter to BL31Tristan Shieh
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and ATF(BL31) can get this parameter. Change-Id: Iefa70dc0714a9283a79f97d475b07ac047f5f3b0 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-17AUTHORS: Move src/device copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional cleanup - Unify "Inc" to "Inc." and "LLC." to "LLC" Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie03a3ce1f6085494bd5f38da76e2467970cf301a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-163rdparty/chromeec: Update to latest masterElyes HAOUAS
It's been some time and there are 1420 new commits. Including one that allows reproducible builds \o/ and one that breaks building with empty $(CC) :-/ Change-Id: I5e81d5a2f1018481b9103fc5a1f4b8c72fb9deec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30679 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16mb/up/squared: Do RAM config based on SKU IDFelix Singer
TESTED=UP Squared Change-Id: Ic121652213d5b1f65cff2f3096e919a3cf88db72 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34838 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16src/soc/intel/{common,cnl,skl,icl}: Move global reset req function to commonSridhar Siricilla
send_heci_reset_req_message() is defined in multiple places, hence move it to common code. TEST=Verified on CMLRVP/Hatch/Soraka/Bobba/Dragon Egg boards. Change-Id: I691fc0610356ef1f64ffa7cc4fe7a39b1344cc16 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35228 Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16src/mainboard: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: Icdbccb3af294dd97ba1835f034669198094a3661 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33528 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16mediatek/mt8183: Add soc ARM Trusted Firmware supportkenny liang
Set BL31 platform to mt8183 to link with ARM Trusted Firmware. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui with more patches in ATF. Change-Id: Ia988d2b4ed646027c04c7c6ff0e50ed7a0b14da3 Signed-off-by: kenny liang <kenny.liang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-16mb/google/kohaku: Update USB port settingsSeunghwan Kim
This change overrides USB port settings for kohaku. Some port settings are same with baseboard, but I'd like to describe all settings here to be aware of current setting and usage of USB ports on kohaku. BUG=none BRANCH=none TEST=built and measured SI of USB ports internally Change-Id: I5ac05485d1cd94416e5a0aecf7fa6769bd7c9e84 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-15mb/packardbell/ms2290: Use common SB code to set up GPIO'sArthur Heymans
Change-Id: I6658c53213127db5a46f2ea330d85a3a537c3276 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-15soc/intel/skylake: add some FSP SATA paramsMichael Niewöhner
This adds SATA parameters for SpinUp, HotPlug and TestMode to the Skylake FSP 2.0 interface. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I7ba67879b78c2cb0fd0b0ce832140b213edd5884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35186 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15mb/*/{x201,ms2290}/mainboard.c: Remove superfluous ramstage codeArthur Heymans
Change-Id: I0270c50dea2a2ce6c8e6114ed708f06be9d33c0e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-15cpu/intel/microcode: Make microcode lib available in bootblockRizwan Qureshi
Make microcode lib available in bootblock. Now that microcode.c is compiled in bootlock no need to include it explicitly, hence remove its references. Change-Id: I419da6af70222902e3ca39fc2133d5dc8558e053 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35278 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15{i945,i82801gx}: Remove unneeded include <cpu/x86/cache.h>Elyes HAOUAS
Change-Id: I4f38be28d81c0c01c0389210552232e63ea55545 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34934 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15src/security: Remove unused #include <fmap.h>Elyes HAOUAS
Change-Id: I9db59d5db2ed3e792251a94b67fb277d9160e4e8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33734 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15southbridge: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I8578cf365addc47550e27c9ebed08de340d70ede Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33531 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15src/soc: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I80c92f744fb9a6c3788b8b9ba779deef76e58943 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33530 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15northbridge: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: Ib60305948ac1d3464586fe69501bd28eecb761ee Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33529 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15{cpu,device,drivers}: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I68da75e3afa2f66aff9961728d4a76bc3e175fce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33527 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15src/mainboard: Remove not used #include <elog.h>Elyes HAOUAS
Change-Id: I901cb35488e08f58cdf97f3a8d0f5a8d03560f86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33729 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15nb/i945: Remove unused include <cpu/cpu.h>Elyes HAOUAS
Change-Id: I5dff9b7c157b2aba596e95b5fb18a84f7c4e9365 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-15lib/coreboot_table: Show splashscreen in lb_table_initJohanna Schander
Every vga init implementation needs to cache the framebuffer state to be able to fill the lb_framebuffer struct later on in the fill_lb_framebuffer call. Showing the bootsplash afterwards guarantees to have the same interface into all the vga drivers. This is by far from ideal, as it only allows for a single driver at compile-time and should be adapted in the future. It was tested on the wip razer blade stealth using vgabios @ 1280x1024 and also in Qemu @ 1280x1024. By default the qemu framebuffer will be initialized in 800x600@32. This can be overwriten by configuration by setting CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_{X,Y}RES . Change-Id: I4bec06d22423627e8f429c4b47e0dc9920f1464e Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-15soc/amd/common: Remove Picasso display HDA from listMarshall Dawson
The PCO_HDA0 device contains the "ATI" vendor ID 0x1002 and was incorrectly added to this file. It isn't anticipated that the device will need special handling, so remove it from the list of supported IDs. Change-Id: I306a806dc510e3a4ee3d9c0663306dc93b1d936d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-09-14src/: Replace some __PRE_RAM__ useKyösti Mälkki
Change-Id: Iaa56e7b98aad33eeb876edd7465c56c80fd1ac18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 06:08:22 +0000