summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-03-16soc/intel/common: Retry MEI CSE DISABLE commandSridhar Siricilla
As per ME BWG, the patch retries MEI CSE DISABLE command if CSE doesn't respond or sends the garbled response. It retries the command additionally 2 more times. TEST=build and boot the Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Id38a172d670a0cd44643744f27b85ca7e368ccdb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16soc/intel/common: Retry END_OF_POST commandSridhar Siricilla
As per ME BWG, the patch retries END_OF_POST command if CSE doesn't respond or sends the garbled response. It retries the command additionally 2 more times. BUG=b:200251277 TEST=Verify EOP retry mechanism for brya board. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ieaec4d5564e3d962c1cc866351e9e7eaa8e58683 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16soc/mediatek: PCI: Remove global variableJianjun Wang
Remove global variable and use 'pcidev_path_on_root()' to get the base address of PCIe controller. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ia41c82a7aa5d6e9d936e242550851cef83afeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/mediatek: Add chip config for setting PCIe configJianjun Wang
Add chip config for setting PCIe config. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Icff83f2a9f76862065987a74cfcc7e511be80a20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/amd/common/block: Add mainboard_handle_smiRaul E Rangel
The current SMM framework only allows the mainboard code to handle GPEs. i.e., Events 0 - 23. This change allows the mainboard code to handle any SMI events not handled by the SoC code. This will allow the mainboard code to handle `SMITYPE_ESPI_SMI`. BUG=b:222694093 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I81943e8cb31e998f29cc60b565d3ca0a8dfe9cb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-16mb/hp/snb_ivb_laptops: Rename `BOARD_HP_SNB_IVB_LAPTOPS`Felix Singer
Rename `BOARD_HP_SNB_IVB_LAPTOPS` to `BOARD_HP_SNB_IVB_LAPTOPS_COMMON` to indicate and to make it clear that this option serves as base for others. Built HP EliteBook Revolve 810 G1 with BUILD_TIMELESS=1 and also with `INCLUDE_CONFIG_FILE` disabled. coreboot.rom remains identical. Change-Id: Icadeb8a33ae0787d2cd5da460065a2ed15256d64 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/hp/snb_ivb_laptops/Kconfig{,.name}: Reorder selects alphabeticallyFelix Singer
Built HP EliteBook Revolve 810 G1 with BUILD_TIMELESS=1 and coreboot.rom remains identical. Change-Id: I54367c7c663ad288ccdcbd4e7289546489a68f30 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/google/brya: set GPP_D0 to GPOMark Hsieh
Based on the schematic carbine_adl-p_dvt_20211104.pdf, the GPP_D0 is directly connected to FP module, Set GPP_D0 to GPO, DUT can flash FP firmware successfully. BUG=b:222188263, b:223906569 TEST=USE="project_gimble emerge-brya coreboot" and run the Fingerprint Firmware Test. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I164ffff6bd3b4058d6e28247eb7c3ed46d3891b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-16libpayload: Parse DDR Information using coreboot tablesRavi Kumar Bokka
BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ieca7e9fc0e1a018fcb2e9315aebee088edac858e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59193 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-15i2c: Add configurable I2C transfer timeoutJes Klinke
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US, which controls how long to wait for an I2C devices to produce/accept all the data bytes in a single transfer. (The device can delay transfer by stretching the clock of the ack bit.) The default value of this new setting is 500ms. Existing code had timeouts anywhere from tens of milliseconds to a full second beween various drivers. Drivers can still have their own shorter timeouts for setup/communication with the I2C host controller (as opposed to transactions with I2C devices on the bus.) In general, the timeout is not meant to be reached except in situations where there is already serious problem with the boot, and serves to make sure that some useful diagnostic output is produced on the console. Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f Signed-off-by: Jes B. Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-15soc/intel/tgl: move DIMM_SPD_SIZE from mb to SoC KconfigMichael Niewöhner
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to 512 in the SoC Kconfig and drop it from the mainboard Kconfigs. Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-15intel/common/block: Add APL and GLK PCI IDs for HDASean Rhodes
Add PCI ID's for APL/GLK so they can use HDA. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I37df388a93ffc06e716085a58d0d00ed5c6fa9e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-03-15mb/google/guybrush/var/nipperkin: update APU STT settingKevin Chiu
BUG=b:219616787 BRANCH=guybrush TEST=emerge-guybrush coreboot update the thermal setting value by measurement and pass the thermal performance test Change-Id: I3ba3ab990d5362c6f02d2ee5a023f4c5cca7fa45 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-15mb/google/brya/var/banshee: Add camera privacy settingFrank Wu
Using the GPP_F19 as privacy switch for camera in banshee. BUG=b:223712143, b:216110896 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I67d65347ceac7152f1951018a633a2e93ee84e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-15lib/spd: Do not print part number if it is not availableWerner Zeh
If the DRAM part number is not available in the SPD data (meaning filled with 0x00) do not print it in the log. Change-Id: If7224c6e114731b1c03915a2bde80f57369d0cee Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-15soc/mediatek/mt8186: change pmic hwcid from warning to infoRex-BC Chen
The pmic hwcid dumping should not be a warning, so we modify it to info. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a930b69bd45d5f0d84c3d269ca721b287dbadea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15soc/mediatek/common: Add halt() after triggering wdt resetRex-BC Chen
It's more reasonable to halt when we trigger watchdog reset because the whole system should be reset afterwards. BUG=b:222217317 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I726ba1599841f63b37062f9ce2e04840e4f250bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15mb/google/brya: Disable C1-state auto demotion for Brya & BraskMAULIK V VAGHELA
C1-state auto demotion feature allows hardware to determine C1-state as per platform policy. Since Brya sets performance policy to balanced from hardware, auto demotion can be disabled without performance impact. Also, disabling this feature results in 110 mW power savings during video playback. Note that C1state Autodemotion feature is not applicable for ADL-P SoC. Hence recommendation is to keep it disabled. BUG=b:221876248 BRANCH=firmware-brya-14505.B TEST=Code compiles and correct value of c1-state auto demotion is passed to FSP. Also power and performance impact has been measure by respective teams. Change-Id: I41eea916cdfe4a86e4d263e3191f5cb40fa33a90 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-03-15soc/intel/alderlake: Allow mainboard to configure c1-state auto-demotionMAULIK V VAGHELA
FSP has a parameter to enable/disable c1-state autodemotion feature. Boards/Baseboard can choose to use this feature as per requirement. This patch hooks up this parameter to devicetree BUG=b:221876248 BRANCH=firmware-brya-14505.B TEST=Check code compiles and correct value has been passed to FSP. Change-Id: I2d7839d8fecd7b5403f52f3926d1d0bc06728ed9 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-03-15soc/intel/adl/chip.h: Convert all camel case variables to snake caseMAULIK V VAGHELA
coreboot chip.h files mainly contains variable which allows board to fill platform configuration through devicetree. Since many of this configuration involves FSP UPDs, variable names were in camel case which aligned with UPD naming convention. By default coreboot follow snake case variable naming, so cleaning up file to align all variable names as per coreboot convention. During renaming process, this patch also removes unused variables listed below: -> SataEnable // Checked in SoC code based on PCI dev enabled status -> ITbtConnectTopologyTimeoutInMs // SoC always passes 0, so not used Note: Since separating out changes into smaller CL might break the compilation for the patch set, this is being pushed as a single big CL. BUG=None BRANCH=firmware-brya-14505.B TEST=All boards using ADL SoC compiles with the CL. Change-Id: Ieda567a89ec9287e3d988d489f3b3769dffcf9e0 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-03-15{mb, soc}: Move mrc_cache invalidating logic into `memory` common codeSubrata Banik
Commit hash b8b40964 ( mb, soc: Add the SPD_CACHE_ENABLE) introduced per mainboard logic to invalidate the mrc_cache. This patch moves mrc_cache invalidating logic into IA common code and cleans up the code to remove unused argument `dimms_changed` from SoC and mainboard directory. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6f18e18adc6572571871dd6da1698186e4e3d671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-15soc/intel/common: Pass `FSPM_UPD *` argument for spd functionsSubrata Banik
This patch adds `FSPM_UPD *` as argument for mem_populate_channel_data() and read_spd_dimm(). This change will help to update the architectural FSP-M UPDs in read_spd_dimm(). BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I770cfd05194c33e11f98f95c5b93157b0ead70c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-15{mb, soc}: Change `memcfg_init()` and `variant_memory_init()` prototypeSubrata Banik
This patch modifies `memcfg_init` and `variant_memory_init`functions argument from FSP_M_CONFIG to FSPM_UPD. This change in `memcfg_init()` argument will help to update the architectural FSP-M UPDs from common code blocks rather than going into SoC and/or mainboard implementation. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3002dd5c2f3703de41f38512976296f63e54d0c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-14mb/google/herobrine: consolidate hoglin/herobrine QUP initsShelley Chen
Hoglin and Herobrine (proto1) should share majority of GPIOs. Conslidating the QUP initializations in mainboard. Also, putting fingerprint init in a conditional as not all devices will have an FP sensor. BUG=b:182963902,b:223826899 BRANCH=None TEST=booted BIOS on hoglin and check for i2c errors in dmesg Change-Id: I48ce42760f2c75f04619b967a05909d2b3f28e2c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-14mb/google/trogdor: Add variant GelarshieMars Chen
New board introduced to trogdor family. BUG=b:223101874 BRANCH=none TEST=make Signed-off-by: Mars Chen <chenxiangrui@huaqin.corp-partner.google.com> Change-Id: Ie83df3c753d0863841430fe62805250ef8efeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-14mb/google/brya/var/primus{4es}: add eMMC enable pin in ramstageCasper Chang
Currently the BayHub eMMC enable pin is using the default configuration from the baseboard, which leads to RTD3 not being able to control the GPIO when exiting and entering suspend. To fix this, program the GPIO in the ramstage GPIO table. BUG=b:222436260 TEST=USE="project_primus" emerge-brya coreboot chromeos-bootimage scope enable pin while performing suspend stress and enable pin works as expected. test suspend stress 1000 cycles passed on primus. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I1b6f164cc326bd368addb1e143ad2cbd449bb08d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14mb/starlabs/labtop: Pull SSD Pin to low when entering S3Sean Rhodes
Pull GPP_D16 to low when suspending, otherwise it will remain active and use power. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2cbe7caf66e8d8c27414aca3b74416c2b8115ea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-14mb/siemens/mc_ehl: Increase SPD buffer size to 512 bytesWerner Zeh
DDR4 SPD data needs to be 512 byte to comply with the spec. Though there is no vital timing data used beyond 256 byte there are some part information which will be used to show the part info in the coreboot log. If the buffer is too small this log shows garbage. This patch increases the SPD buffer size from 256 byte to 512 to avoid side effects. Change-Id: I5b88df7818cfd62b3579d69f9f5bb14880f49c8c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-14soc/intel/common: Use generic enum type valuesSridhar Siricilla
The patch uses generic enum type values for EOP command handler. So, it renames cse_eop_result enum type to cse_cmd_result and also renames the enum values to have generic name. TEST=Build the code for Gimble Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ie0efa8fff08318ed863010db289959d113f4767e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14soc/intel/common: Use heci_reset() in the CSE TX and RX flowsSridhar Siricilla
The patch implements error handling as per the ME BWG guide. The BWG recommends HECI interface reset if there is a timeout or malformed response is received from the CSE. Also, the patch triggers HECI interface reset if the CSE link state is not ready in the heci_send() API. TEST=Verify HECI Interface reset in the simulated error scenarios. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I3e4a97800cbc5d95b8fd259e6e34a32fc82d8563 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14soc/intel/common: Implement error codes for for heci_send_receive()Sridhar Siricilla
The patch implements below changes: 1. Implements different error codes and use them in appropriate failure scenarios of below functions: a. heci_send() b. recv_one_message() c. heci_receive() 2. As heci_send_receive() is updated to return appropriate error codes in different error scenarios of sending and receiving the HECI commands. As the function is updated to return 0 when success, and non-zero values in the failure scenarios, so all caller function have been updated. BUG=b:220652101 TEST=Verified CSE RX and TX APIs return error codes appropriately in the simulated error scenarios. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ibedee748ed6d81436c6b125f2eb2722be3f5f8f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14mb/google/brya/var/kinox: update overridetreeDtrain Hsu
1. Update override devicetree based on schematics. 2. ALC5682I-VS is for audio codec. BUG=b:218786363, b:214025396, b:212183045 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I08a1c2f784175b208ccdc562668041f432618dfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/62553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14mb/google/guybrush: Fix building with VBOOT_STARTS_IN_BOOTBLOCKRaul E Rangel
The verstage.c file contains PSP verstage specific code. We don't need it when using x86 verstage. BUG=b:193050286 TEST=Build and boot guybrush with x86 verstage Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6dc928cdce0c922bb18f4479b993c89dff106070 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62740 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/google/brya: Set EPP to 45% for all Brya variantsCliff Huang
This sets EPP value to be 45% for all Brya variants. Historically, EPP Ratio has always been 50% (128) on Chrome platforms. But on Intel Alderlake EPP ratio of 45% is recommended for optimal power and performance on Chrome platforms. BUG=b:219785001 BRANCH=firmware-brya-14505.B TEST= Use 'iotools rdmsr [cpu id] 0x774' command and check field 32:24 = 0x73. Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: I973cfec72a0be24c56c4cd3283d2fe6e18400d02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14soc/intel/alderlake: Add EPP override supportCliff Huang
This updates energy performance preference value to all logical CPUs when the corresponding chip config is true. BUG=b:219785001 BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: Ie59623fe715b0c545f8d4b6c22ab2ce670a29798 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14mb/google/dedede: Update DPTF settingTeddy Shih
Update PL1, PL2, and temperature sensor values from thermal team, as well as, we remove unused temperature sensors according to baseboard/devicetree.cb and mainboard schematic. After we check DTT setting, the thermal and performance test pass. BRANCH=dedede BUG=b:204229229 TEST=on beadrix, run following commands: localhost /tmp # cat /sys/class/thermal/thermal_zone*/type x86_pkg_temp INT3400 Thermal TSR0 TSR1 TCPU localhost /tmp # cat /sys/class/thermal/thermal_zone*/temp 45000 20000 32800 32800 39000 Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ibc59c4aa431f600158e744f5bbdc6d59a07a1ef3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62729 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/googe/skyrim/baseboard/devicetree: update USB port device ID on xhci2Felix Held
The one USB2 port on the XHCI2 controller should have the port ID 2.0, since it's the first USB2 port on that XHCI controller. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4a370132960939bccec4eb69a6590d0880b04137 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62713 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/amd/chausie/devicetree: enable GFX HDA, ACP and XHCI2 devicesFelix Held
GFX HDA is the audio controller that provides audio output via the external display connection, ACP is the audio coporcessor for the on- board audio codec and XHCI2 is the third XHCI controller that provides one USB 2.0 port. All those devices are used, so enable them in the board's devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I186797a832470eb17752e06aa2fcc0b5c9db0398 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62571 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/google/nissa/var/nivviks: Hook up SD host controller GL9750Eric Lai
Select GL9750 driver and add power sequence according to datasheet: GL9750S-OIY04 rev1.22. BUG=b:223304292 TEST=check GL9750 can get enumerated by kernel 5.15. 01:00.0 SD Host controller: Genesys Logic, Inc Device 9750 (rev 01) Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ib6d461a56f6aeba30994daafe8993c36df4b309d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-03-14mb/google/nissa/var/nivviks: Enable pen garageEric Lai
Enable pen garage. Pen detect is active low. And wake system when eject. BUG=b:223476974 TEST=evtest work as expected. Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100 Input device name: "PRP0001:00" Supported events: Event type 0 (EV_SYN) Event type 5 (EV_SW) Event code 15 (SW_PEN_INSERTED) state 0 Properties: Testing ... (interrupt to exit) Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1 Event: -------------- SYN_REPORT ------------ Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I2f676301c3372a4760853ce9c10b75f94e22bbcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-10drivers/pcie/generic: Add support to generate code under companion device ↵Cliff Huang
instead Only one ACPI device should be added to a PCIe root port. For the root ports which already have device created, the generated code from this driver needs to be merged with the existing device. By default, this driver will create new device named DEV0. This change allows to generate code under an existing device. ex: (generate code under PXSX): Scope (\_SB.PCI0.RP01.PXSX) { Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package (0x01) { Package (0x02) { "UntrustedDevice", One } } }) } BUG=b:221250331 BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I80634bbfc2927f26f2a55a9c244eca517c437079 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-10soc/intel/alderlake: Inject CSE TS into CBMEM timestamp tableBora Guvendik
Get boot performance timestamps from CSE and inject them into CBMEM timestamp table after normalizing to the zero-point value. Although consumer CSE sku also supports this feature, it was validated on CSE Lite sku only. BUG=b:182575295 TEST=Able to see TS elapse prior to IA reset on Brya/Redrix 990:CSME ROM started execution 0 944:CSE sent 'Boot Stall Done' to PMC 88,000 945:CSE started to handle ICC configuration 88,000 (0) 946:CSE sent 'Host BIOS Prep Done' to PMC 90,000 (2,000) 947:CSE received 'CPU Reset Done Ack sent' from PMC 282,000 (192,000) 0:1st timestamp 330,857 (48,857) 11:start of bootblock 341,811 (10,953) 12:end of bootblock 349,299 (7,487) Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Idcdbb69538ca2977cd97ce1ef9b211ff6510a3f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-10mb/google/skyrim: Configure WLANJon Murphy
Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN. Mappping derived from Skyrim schematic. BUG=b:214412172 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I16e35b443f741d366589fefb7fd21863369d1ec2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10mb/google/skyrim:Update GPIO 32Jon Murphy
GPIO 32 was not allocated correctly, updating to reflect the native function use of the pin BUG=b:214412172 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Idadd2a802b3244eba8ee83f80d8f10baebe4ca40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62717 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-10mb/google/herobrine: Add trackpad initializationRavi Kumar Bokka
Initialize trackpad on Qualcomm reference boards BUG=b:182963902,b:223826899 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I93e866d92cf37887a98de88b4b2d768562515670 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62226 Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-10mb/google/guybrush: Enable DEBUG_SMI for non-serial firmwareRaul E Rangel
In order to copy the PSP verstage logs into x86 cbmem, we need to enable DEBUG_SMI. This will include the CBMEM console code in SMM. I only enable DEBUG_SMI when UART is disabled because SMM doesn't currently save/restore the UART registers. This will result in clearing the interrupt enable bits and makes it so you can no longer use the TTY. BUG=b:221231786, b:217968734 BRANCH=guybrush TEST=Build serial and non serial firmware and verify DEBUG_SMI is set correctly. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I85a7933e8eb49ff920d00e43a494aaeab555ef3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10soc/amd/{common/vboot,cezanne}: Copy S0i3 verstage logs into cbmemRaul E Rangel
Now that SMM can write to CBMEM we can simply replay the transfer buffer cbmem console to move it into the main cbmem console. replay_transfer_buffer_cbmemc() relies on the EARLY_RAM linker symbols. Since the SMM rmodule get linked with a different linker script than bootblock/romstage it doesn't have access to these symbols. In order to pass these symbols into SMM, we parse the bootblock.map file and generate an early_ram.ld script. This script is then used when linking SMM. I replay the buffer in `smm_soc_early_init` because this call happens before `console_init()`. `console_init()` prints the SMM header and we want to append the verstage contents before printing the header to avoid confusion. BUG=b:221231786 TEST=Perform S0i3 cycles and verify PSP verstage logs now show up when doing `cbmem -c`. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I64d33ccdee9863270cfbcaef5d7c614349bd895c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10cpu/x86/smm: Add weak SoC init and exit methodsRaul E Rangel
This change provides hooks for the SoC so it can perform any initialization and cleanup in the SMM handler. For example, if we have a UART enabled firmware with DEBUG_SMI, the UART controller could have been powered off by the OS. In this case we need to power on the UART when entering SMM, and then power it off before we exit. If the OS had the UART enabled when entering SMM, we should snapshot the UART register state, and restore it on exit. Otherwise we risk clearing some interrupt enable bits. BUG=b:221231786, b:217968734 TEST=Build test guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I946619cd62a974a98c575a92943b43ea639fc329 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10mb/google/guybrush/var/nipperkin: turn off WWAN DPRKevin Chiu
Sets GPIO 42 to high to turn off WWAN DPR BUG=b:216735313 BRANCH=guybrush TEST=emerge-guybrush coreboot make sure GPIO42 is high Change-Id: Id0fcf27f086f98b2d42b47c8a871252b52d204ba Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-10soc/mediatek/mt8195: Enable PCIe supportJianjun Wang
Enable PCIe support for mt8195. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I314572955f1021abe9f2f0f4635670135ed08fff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8195: Add driver to configure PCIeJianjun Wang
Add a new function 'mtk_pcie_pre_init' to assert the PCIe reset at early stage to reduce the impact of 100ms delay. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: If6799c53b03a33be91157ea088d829beb4272976 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/amd/cezanne/psp_verstage: Log the platform boot mode reportKarthikeyan Ramasubramanian
Log the platform boot mode reported by PSP verstage to PSP stage 1 bootloader. This helps to improve the debuggability. BUG=b:193050286 TEST=Build and Boot to OS in Nipperkin. Ensure that the platform boot mode is logged in the verstage logs. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I752ee56f2af48215a770d799432d02f0609757cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-03-10mb/google/guybrush/var/nipperkin: Update privacy GPIO to Graphics DRMKarthikeyan Ramasubramanian
GPIO_18 is used for LCD_PRIVACY_SCREEN feature starting board phase 2. But it is programmed incorrectly in the concerned ACPI device. Pass the correct GPIO. BUG=b:204401306 TEST=Build and boot to OS in Nipperkin. Ensure that the ACPI object contains the right GPIO. Ensure that the screen visibility gets updated by pressing the privacy screen button. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I99d40b49f4e97063f1ec2e15ac3da21f700a93eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-10soc/intel/adl: Send EOP early in the boot sequenceMAULIK V VAGHELA
As part of boot time optimization, one of the culprit was CSE where response to End Of Post (EOP) command used to take ~60ms. Earlier patch was pushed to delay the EOP to reduce response time to ~5-7 ms. During this stage overall platform boot time was ~1.15 seconds. Once boot time was optimized to ~ 1 seconds, CSE EOP time again increased to ~80 ms since coreboot used to send EOP at the time where CSE was busy. This created some back and forth moving of sending EOP command function within coreboot sequence. Upon debugging using traces, it was found that coreboot used to send EOP late where CSE was busy loading other IP payload, so it might take more time to respond. In order to avoid delayed response, coreboot has to send EOP in stage when CSE is done with firmware init and it will be ready to serve EOP as soon as possible. This also aligns with previous flow where FSP used to send EOP once silicon init is done and coreboot used to rely on FSP to send this message. Moving EOP to earlier stage (From SoC) meets the requirement and CSE EOP time reduces from ~60 ms to ~20 ms on Brya board. Note that once SoC code sends EOP, coreboot common code won't send it again since common code already has check in case EOP is sent earlier. BUG=b:211085685 BRANCH=firmware-brya-14505.B TEST=Tested on Brya system before and after the changes. Observed ~40ms savings in boot time. Change-Id: I9401d5e36ad43cdc0dfe947aabc82528d824df9b Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-03-10intel/common/block/cse: Add option to send EOP early via SoCMAULIK V VAGHELA
Earlier while trying to optimize boot time End Of Post (EOP) time kept increasing (~80 ms) when boot time decreased to around 1 second. This was because CSE was busy with own firmware loading. When EOP was moved later in boot stage it again created issue since CSE got busy with other payload loading for OS boot, so response to EOP got delayed by ~70-80 ms. In order to avoid delayed response, coreboot has to send EOP in stage when CSE is done with firmware init and it will be ready to serve EOP as soon as possible. This also aligns with previous flow where FSP used to send EOP once silicon init is done and coreboot used to rely on FSP to send this message. Moving EOP to BS_DEV_INIT boot state meets this requirement and CSE EOP time reduces from ~60 ms to ~20 ms on Brya QS board. Since this setting might vary for each SoC, SoCs can decide when to send EOP in the boot sequence. This patch adds Kconfig option to send EOP via SoC BUG=b:211085685 BRANCH=firmware-brya-14505.B TEST=Code compilation is fine for Brya board. Boot time test is done using entire patchset and EOP time is reduced to ~25ms from earlier ~80ms. Change-Id: I9c7fe6f8f3fadb68310d4a09692f51f82c737c35 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-10Revert "drivers/intel/fsp2_0: Allow `mp_startup_all_cpus()` to run serially"Ronak Kanabar
This reverts commit 6af980a2aeca9b8cedfb3d7734389e6e36099c88. BUG=b:199246420 Change-Id: Iddb7aa6d52b563485a496798f2fe31ed64b4f4a8 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2022-03-10mb/google/brask/variants/moli: Change DDR4 Interleave to Non-Interleavezoey wu
The Brask DDR4 setting are interleave, due to Moli PCB layer limited and the routing need to smooth, we will use non-interleave for Moli DDR4. BUG=b:219831754 Signed-off-by: zoey wu <zoey_wu@wistron.corp-partner.google.com> Change-Id: Iab153f16a3b729e7fa9daaa3dbfbccc70e6d789d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10mb/google/brask/variants/moli: Reduce PSysMax to 11 ARaihow Shi
Decrease PSysMax from 13.52 A to 11 A for Moli variant according to its power circuitry, implying Psys_Pmax = 11A * 19.5V = 214.5W BUG=b:215258941 Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I61f4813f3527123a590d80b4a6e49d76ebb71c99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10soc/apollolake: Hook up VTD to CMOSSean Rhodes
Hook up vtd_enable to CMOS value of "vtd". Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I16b43f0489f652d650e820c36b2b9bea61cf3c8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10mb/starlabs/labtop: Remove unnecessary return value from MWAKSean Rhodes
Don't return 0x00 when running MWAK as it is not needed. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic62eab8ae5319aff37c61fc29d701d9a36ada919 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10ec/starlabs/merlin: Use ECWR functionSean Rhodes
Use ECWR function, instead of writing raw values to emem, to avoid a lack of syncronisation as it uses a mutex. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I90cfd3e1752fe25493bd72ea6bcab1fd9318d2e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10ec/starlabs: Write the correct value for KLBE when suspendingSean Rhodes
The current code will write the raw value from the CMOS, which doesn't match the respective setting in EC. Switch argument will write the correct value, and prevent the setting being reset. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I40dc78c743f4201a11ea0c26a8af716cab42b805 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10ec/starlabs: Write the correct value for KLSE when suspendingSean Rhodes
The current code will write the raw value from the CMOS, which doesn't match the respective setting in EC. Switch argument will write the correct value, and prevent the setting being reset. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I93444cdb96eaf729630b48551d0853511b584634 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10ec/starlabs: Write the correct value for TPLE when suspendingSean Rhodes
The current code will write the raw value from the CMOS, which doesn't match the respective setting in EC. Switch argument will write the correct value, and prevent the setting being reset. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iabeec47bf492b698f95d86aa2d08ba9caedd75f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10ec/starlabs: Store the correct value for KLBE when suspendingSean Rhodes
The current code will read the raw value from the EC, which doesn't match the respective setting in CMOS. Switch argument will store the correct value. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic2a83df9a270de6d7bab295e732a6c13accbe17c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62606 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-10ec/starlabs: Store the correct value for KLSE when suspendingSean Rhodes
The current code will read the raw value from the EC, which doesn't match the respective setting in CMOS. Switch argument will store the correct value. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I62e0fc3b6fcae72f2d8eacf37a390b4e4b1f0783 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62605 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-10ec/starlabs: Store the correct value for TPLE when suspendingSean Rhodes
The current code will read the raw value from the EC, which doesn't match the respective setting in CMOS. Switch argument will store the correct value. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I921be8aea55b95f1ba233d2640d9bae80f8c3703 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62604 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-10mb/starlabs/labtop: Always run PTSSean Rhodes
Remove the dependency on Arg0 so PTS always runs. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I96c44397d62848231039330a32de781f75bb56bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
2022-03-10ec/starlabs/merlin: Change RPTS method to SerializedSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id64d321846dc042d4092d39ce9598d028ab15ed0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-10soc/apollolake: Correct SMBus interruptSean Rhodes
This solved the error: i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A i801_smbus 0000:00:1f.1: PCI INT A: not connected i801_smbus 0000:00:1f.1: SPD Write Disable is set i801_smbus 0000:00:1f.1: SMBus using polling Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Idebd581b7ed6d193d83340b7dc94248df43525c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10soc/mediatek/mt8186: Modify internal capid to 0xE0Rex-BC Chen
The mainboard may not be able to disable the internal cap, so we want to set 0xe0 for all boards to minimize the internal cap. And a mainboard implementation may choose XTAL with higher cload if the frequency requirement is met, and the total capacitance can be tuned externally for different boards. BUG=b:218439447 TEST=set capid to 0xe0. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2139e6b3456d7a50e3cdc8fc606e5f6ea3406044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62563 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09cpu/intel/common: Add support for energy performance preference (EPP)Cliff Huang
This provides support to update energy performance preference value. BUG=b:219785001 BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: I381bca6c7746a4ae7ca32aa1b4992a6d53c8eaaa Reviewed-on: https://review.coreboot.org/c/coreboot/+/62653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/intel/common: Include Meteor Lake device IDsWonkyu Kim
Reference: chapter2 in Meteor Lake EDS vol1 (640228) Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie71abb70b88db0acec8a320c3e2c20c54bbb4a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62581 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/amd/*/lpc: rename SPIROM_BASE_ADDRESS_REGISTERFelix Held
Rename SPIROM_BASE_ADDRESS_REGISTER to SPI_BASE_ADDRESS_REGISTER to clarify that this isn't the address the SPI flash gets mapped, but the address of the SPI controller MMIO region. This also aligns the register name with the PPR. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifd9f98bd01b1c7197b80d642a45657c97f708bcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-09drivers/wifi,soc/intel/adl: Move CnviDdrRfim property to driversTim Wawrzynczak
Some non-SoC code might want to know whether or not the CNVi DDR RFIM feature is enabled. Also note that future SoCs may also support this feature. To make the CnviDdrRfim property generic, move it from soc/intel/alderlake to drivers/wifi/generic instead. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Idf9fba0a79d1f431269be5851b026ed966600160 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
2022-03-09prog_loader: Change legacy_romstage_select_and_load() to return cb_errJulius Werner
This is passing through a cb_err from cbfs_prog_stage_load(), so it should be declared to return that as well. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I5510d05953fe8c0e2cb511f01f862b66ced154ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/62656 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09vc/google/chromeos/Kconfig: Fix typoAngel Pons
heirarchy ---> hierarchy Change-Id: I5cbd77a156852e6f8ad6eafc316ee33f153635b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-03-09soc/mediatek/mt8186: set pin drive strength to 8mA for NORRex-BC Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.1, 5.6 and 5.8 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=SPI SI tests for AP to NOR pass for both kingler and krabby. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5b6e37b0f7d4207ea35f11394d25ad1e096ac01a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09soc/mediatek/mt8186: Add GPIO driving functionsGuodong Liu
Add GPIO driving functions to adjust pin driving. The value of drive strength is different for each SoC, so we define GPIO_DRV0 to GPIO_DRV7 which are corresponding to 2/4/6/8/10/12/14/16mA in MT8186. This implementation is according to chapter 5.1 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=build pass Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I6d987f28be98b515fa5c542222bda08bea1d5118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62471 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09mb/google/brya/var/kano: Update TDP PL1, PL2, and PL4 for U28 SKUsDavid Wu
Based on testing results from the thermal team, they have decided to update PL1, PL2 and PL4 for U28 SKUs. BUG=b:221338290 TEST=Run with U28 and ensure the PL1/PL2/PL4 settings are correct Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ib82e2dbacd6cbc39390eb28f27ca9db48d6c215c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-03-09mb/google/brya/variants/felwinter: Fix stylus UI behavior bugJohn Su
Fix stylus UI behavior bug. 1) it appears the kernel's gpio_key driver is not expecting an IRQ descriptor for the `gpio` property, therefore change to an active-low input. 2) The wakeup event was configured backwards. Change list - Configure GPP_A7 as "ACPI_GPIO_INPUT_ACTIVE_LOW". - Change wakeup_event_action from ASSERTED to DEASSERTED. BUG=b:220992812 TEST=emerge-brya coreboot chromeos-bootimage and verify pass Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I6f5e2992584d759eb1a559684d1cda08c7cbe3f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/skyrim: Add FW_CONFIG DefinitionJon Murphy
BUG=b:214415048 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ia6bb3f717b3d30fe5f166dfc958024e931a070c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-09cpu/x86/smm,lib/cbmem_console: Enable CBMEMC when using DEBUG_SMIRaul E Rangel
This change will allow the SMI handler to write to the cbmem console buffer. Normally SMIs can only be debugged using some kind of serial port (UART). By storing the SMI logs into cbmem we can debug SMIs using `cbmem -1`. Now that these logs are available to the OS we could also verify there were no errors in the SMI handler. Since SMM can write to all of DRAM, we can't trust any pointers provided by cbmem after the OS has booted. For this reason we store the cbmem console pointer as part of the SMM runtime parameters. The cbmem console is implemented as a circular buffer so it will never write outside of this area. BUG=b:221231786 TEST=Boot non-serial FW with DEBUG_SMI and verified SMI messages are visible when running `cbmem -1`. Perform a suspend/resume cycle and verify new SMI events are written to the cbmem console log. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia1e310a12ca2f54210ccfaee58807cb808cfff79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-09mb/google/brya/var/redrix{4es}: Config VR_DOMAIN_GT's slew rate to 1/8Wisley Chen
Config VR_DOMAIN_GT's slew rate to 1/8 as well. BUG=b:204009588 TEST=build and verified by Power team. Change-Id: I766b828ad83710913323cf1485e09c1e0fd5e4c2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/bry/anahera{4es}: Disable TCSS port1Wisley Chen
Disable unused TCSS Port1. BUG=b:223082190 TEST=Build Change-Id: I63f4b7d89a1e37a00c58201ecc88bb336d0932c9 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/brya/var/anahera{4es}: Configure Acoustic noise mitigationWisley Chen
Enable Acoustic noise mitigation and set slew rate to 1/8 BUG=b:223082189 TEST=build and verified by power team Change-Id: I256cc57fb54e5d62e22470a01e7efef359d57083 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/nissa: Add fmd file for nissaKrishna Prasad Bhat
Nissa boards are curretly using chromeos.fmd file of brya. The SPI flash layout for brya is of 32MB size, and nissa is expected to have 16MB SPI NOR flash. The current composition of AP firmware exceeds 16MB. To get an estimate of the unutilized region in the current flash layout for nissa, added RW_UNUSED regions. The idea is to reduce the AP firmware size to under 16MB and to remove the RW_UNUSED regions from the final fmd file. Below table gives the size reduction from brya fmd to nissa fmd: +----------------+-------------------+---------------+ | Region | Earlier size (KB) | New size (KB) | +================+===================+===============+ | SI_ME | 5116 | 3772 | +----------------+-------------------+---------------+ | RW_SECTION_A/B | 8192 | 4344 | +----------------+-------------------+---------------+ | VBLOCK_A/B | 64 | 8 | +----------------+-------------------+---------------+ | ME_RW_A/B* | 3008 | 1434 | +----------------+-------------------+---------------+ | RW_LEGACY | 2048 | 1024 | +----------------+-------------------+---------------+ | RW_ELOG | 16 | 4 | +----------------+-------------------+---------------+ | SHARED_DATA | 8 | 4 | +----------------+-------------------+---------------+ | VBLOCK_DEV | 8 | 0 | +----------------+-------------------+---------------+ | RW_SPD_CACHE | 4 | 0 | +----------------+-------------------+---------------+ | RW_NVRAM | 24 | 8 | +----------------+-------------------+---------------+ | WP_RO | 8192 | 4096 | +----------------+-------------------+---------------+ | GBB | 448 | 12 | +----------------+-------------------+---------------+ *Based on LZMA compression on ME_RW_A/B regions. With LZMA compression, this region can be 1434K. Without this, ~665K will be more in each of these regions. Patch: https://review.coreboot.org/c/coreboot/+/62358/ BUG=b:202783191 BRANCH=None TEST=Build and boot Nivviks. Cq-Depend: chrome-internal:4584911 Change-Id: I24b1c19cb71a54fc916a12668f72193f9689e755 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-03-09mb/google/nissa: Select SOC_INTEL_CSE_LITE_COMPRESS_ME_RW KconfigKrishna Prasad Bhat
Change-Id: Ib27149c527015bd54f839994e047f815e8922dc4 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/intel/common: Add Kconfig to enable compression on ME_RW blobsKrishna Prasad Bhat
Add SOC_INTEL_CSE_LITE_COMPRESS_ME_RW Kconfig to enable compression on ME_RW blobs. Select the Kconfig to add LZMA compressed ME_RW blobs to ME_RW_A/B regions. On ADL-N, this results in savings of ~665KB in each of ME_RW_A/B regions. FMAP REGION: ME_RW_A Name Offset Type Size Comp me_rw 0x0 raw 1275246 LZMA (1957888 decompressed) (empty) 0x1375c0 null 193056 none FMAP REGION: ME_RW_B Name Offset Type Size Comp me_rw 0x0 raw 1275246 LZMA (1957888 decompressed) (empty) 0x1375c0 null 193056 none Change-Id: I2e31c358b4969b077d65ce6369a877914d573aed Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09coreboot_tables.c: Expose the ACPI RSDPArthur Heymans
The ACPI RSDP can only be found in: - legacy BIOS region - via UEFI service On some systems like ARM that legacy BIOS region is not an option, so to avoid needing UEFI it makes sense to expose the RSDP via a coreboot table entry. This also adds the respective unit test. Change-Id: I591312a2c48f0cbbb03b2787e4b365e9c932afff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62573 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/apollolake: Hook up CnviMode to devicetreeSean Rhodes
Hook PCH_DEVFN_CNVI (0c.0) to CnviMode. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8b51e98952a39bd432e9bc63eea57a40dd6cf106 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-09ec/starlabs: Correct Keyboard Backlight offsets for GLKSean Rhodes
Correct the offsets used for the keyboard backlight control: ECRAM_KBL_STATE 0x19 ECRAM_KBL_BRIGHTNESS 0x18 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I23bac43301635e6b18f1cbd28311e7210b049c70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-09mb/starlabs/labtop: Remove duplicate value from KconfigSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0324747f936be27ee39e586124005530d5c424b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-09mb/dell/optiplex_9010: Fix chassis typesMichał Żygowski
Discovered this chassis identification number on Dell Precision T1650 which is much OptiPlex 9010 alike. Precision T1650 is a Mid Tower (MT) chassis. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I2266fe39606b947a3d30a9462377fd56c39c2fa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-03-09mb/dell/optiplex_9010/mainboard.c: Add missing spaceMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I3487b0ab94e565862ed727e9a91bd1efb364d43d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-03-09{drivers/security}: Replace `cb_err_t` with `enum cb_err`Subrata Banik
This patch replaces remaining `cb_err_t` with `enum cb_err` after commit hash 69cc557c (commonlib/bsd: Remove cb_err_t) removes majority of `cb_err_t` instances. TEST=Able to build the brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3392f9c2cfb4a889a999c8ea25066c89979f0900 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-09commonlib/bsd: Remove cb_err_tJulius Werner
cb_err_t was meant to be used in place of `enum cb_err` in all situations, but the choice to use a typedef here seems to be controversial. We should not be arbitrarily using two different identifiers for the same thing across the codebase, so since there are no use cases for serializing enum cb_err at the moment (which would be the primary reason to typedef a fixed-width integer instead), remove cb_err_t again for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/mediatek: Add PCIe supportJianjun Wang
Add PCIe support for MediaTek platform. Reference: - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250) - linux/drivers/pci/controller/pcie-mediatek-gen3.c This code is based on MT8195 platform, but it should be common in each platform with the same PCIe IP in the future. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib9b6adaafa20aeee136372ec9564273f86776da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-08soc/intel/tgl: chipset devicetree: correct TraceHub device aliasMichael Niewöhner
Device 1f.7 is TraceHub, not the PCH Thermal device, which doesn't exist anymore on TGL. Correct the device´s alias. Reference: Intel doc# 631119-007 Change-Id: I30a4ab1e801f6cdb0f2e03f105bf8cc09592eed8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-08soc/intel/tgl: drop orphaned VR domains enumMichael Niewöhner
Change-Id: I937bdf032e1ed86900334d41655f3e6272f66a6f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>